Oliver & Dahlman Equipment Co., Inc. products

3, 4 and 5 Row Models, 4” x 7” x 3/8” Tool Bars for Strength and Durability, Heavy-duty Welded Cat II / III 3 Point Hitch, Spring Loaded Chisel Tine Assemblies, High Abrasion Resistant Coulters, Heavy-duty Gauge Wheels.

3 and 4 Row Models, Heay-duty 3/4” Thick Welded Cat III 3 Point Hitch, With Parallel Linkages, Adjustable Disc Gang Tilt and Swiel Brackets, Disc Gangs – 24” x 1/4” Discs with 1-5/8” round Axles on 9” Spacing, Heay-duty Roller Bearing Assemblies, Disc Scrapers.

Heavy-duty Cat II / III Welded 3 Point Hitch. The extended A-Frame allows the gangs to be mounted in the front or the rear of the tool bar. Folding wing models are operated by two 3-1/2”  x 16” 3000 p.s.i. Hydraulic cylinders and are double hinged for added strength and durability. 3 and 5 Row Models, 4” x 7” x 3/8” Tool Bar  for Strength and Durability, Heavy-duty Welded Cat II / III 3 Point Hitch, Easy adjusting Disc Gang Tilt and Swivel Brackets, Disc Gangs – 1-1/8” square on 6-1/2” spacing, Optional Gauge Wheels and Scratcher Frames.

Disc gangs using heavy-duty roller bearing assemblies and 24” x 1/4” notched discs are mounted on heavy-duty swivel brackets. Swivel bracket design provides quick adjustment for alley width and gangs can be quickly set to throw to or away from the crop.Optional weight box provides increased disc penetration in hard soils and in conditions with heavy debris. Heavy-duty 5” x 7” x 3/8” Tool Bar, Welded Cat III 3 Point Hitch, Optional Weight Box, Easy Swivel Adjustment Brackets, Heavy-duty Roller Bearings, 24” x 1/4” Disc Blades. Oliver & Dahlman Equipment Co. reserves the right to change the design, material and specifications of its products without notice.  Illustrations may include optional equipment and accessories, and may not include all standard equipment.

• 3 and 5 Row Models. • 4” x 7” x 3/8” Tool Bar for Strength and Durability. • Heavy-duty Welded Cat II / III 3 Point Hitch. • Floating Scratcher Frames with Height Adjustment. The heavy-duty scratcher frames float for minimal damage to sprout cane. The scratcher teeth’s spacing is fully adjustable and the teeth can mount out to the edge of the frames allowing for better coverage.

8’ to 26’  Cutting Widths. Heavy-duty Disc Scrapers. 24” x 1/4” Disc Blades. Heavy-duty 4” x 4” x 3/8” Frame. 1-1/2 Square Alloy Steel Axles. Heavy-duty Welded 3 Point Cat II / III Hitch. 9”, 10-1/2” Disc Spacing. Rigid or Hydraulic Folding Models.

8’ to 26’ Cutting Widths. Heavy-duty Disc Scrapers. 24” x 1/4” Disc Blades. Heavy-duty Welded Frame. 1-1/2” Square Alloy Steel Axles. Sealed Flange Bearings. 9” and 10-1/2” Disc Spacing. Rigid or Hydraulic Folding Models.

6’  to 9’6” Cutting Widths . Cat II / III Hitch Pins. USA Made Disc Blades. 9” and 10-1/2” Disc Spacing. 1-1/2” Square Axles. Flange Mounted Bearings. Heavy-duty Welded A-frame. Disc Scrapers.