Perard products

The X-Flow 15 and 19 models are designed to accept the total capacity of the hopper on the largest combine harvesters that can then be immediately transferred. They are easy to use, have limited weight and are cheap to operate, which makes them essential tools for all optimized harvesting operations. They enable combine harvester productivity to be maximised by transferring on the move, while limiting compaction.

The X-Flow is a purely crop-oriented travelling platform. Its 600-mm screw for 28 and 34 m³ makes it one of the most efficient machines on the market for these capacities. It can fill lorries or large trailers at the ends of fields while following as much as two large combine harvesters.

The Interbenne is designed to optimize harvesting sites while limiting compaction. Its high flow rate saves more than 25% of time by eliminating all oil changes when stopped.

The Interbenne is designed to optimize harvesting while limiting compaction. Its high output means a time saving of more than 25% by eliminating emptying when stationary. Its large capacity means it can fill a semi-trailer very quickly.

The Interbenne 46 is equipped with a Ø 700 mm plunger auger and Ø 600 mm swivel part making it possible to obtain a record-breaking discharge rate of approximately 1 minute for 46 m³ without any risk of compressing and therefore breaking the grain.

The Trans-eXpress transfer hopper, which was originally designed to transfer grain from the trailer to the lorry, was used as a basis to produce this new conveyor. The screws are replaced by two 1-m wide rubber conveyor belts. The conveyor will accept a broad range of products such as wood chips, silage, beetroot, whole corn cobs or even potatoes.

Optium K series manure spreaders are fitted with double spiral distributor rotors with a diameter of 750 mm. This unique and patented system achieves a very large working width and exceptional fineness. Therefore, the distribution rotors can spread all types of manure: cattle, droppings, compost, sugar beet lime, etc. They are designed for all users who are looking for superior work quality over a large width. The K series is characterised by low machines with a low loading height, making them ideal for mountainous areas.

Optium L series manure spreaders are fitted with double spiral distributor rotors with a diameter of 860 mm. This unique and patented system achieves a very large working width and exceptional fineness. Therefore, the distribution rotors can spread all types of manure: cattle, droppings, compost, sugar beet lime, etc. They are designed for all users who are looking for superior work quality over a large width (12 to 16 m). The L series is characterised by low machines with a low loading height.

Optium SLC series manure spreaders are fitted with double spiral distributor rotors with a diameter of 1050 mm. This unique and patented system achieves a very large working width and exceptional fineness. Therefore, the distribution rotors can spread all types of manure: cattle, droppings, compost, sugar beet lime, etc. They are designed for all users who are looking for superior work quality over a large width (14 to 18 m). As an option, the SLC series can be fitted with a removable rear hood that covers the distribution rotors. This hood can be used to spread low quantities of very volatile products in the same way as a spreading table.