R C Dalgliesh Ltd.

33 products found

products

  • Abbey - Tanker

    Abbey - Tanker

    Full range of abbey equipment and parts available, slurry pumps, tankers, toppers, muck spreaders,

Products by Case IH - a division of CNH Global

  • Tractors - Farmall Series

  • Farmall - Model C Series - Utility Tractors

    Farmall - Model C Series - Utility Tractors

    6 Models, 64-117 (PTO: 50-99) Engine Horsepower: The utility Farmall C series is a deluxe line of tractors, combining power and performance with a superior operator environment.

  • Farmall - Model V Series - Tractors

    Farmall - Model V Series - Tractors

    1 Model, 106 (PTO: 92) Engine Horsepower: The Farmall V tractors are specialty tractors designed to fit perfectly between vineyard rows, with a low center of gravity for steep inclines.

  • Farmall - Model N Series - Tractors

    Farmall - Model N Series - Tractors

    3 Models, 76-106 (PTO: 62-92) Engine Horsepower: The Farmall N Series tractors are specially designed for vineyards, orchards or any other applications where space is at a premium. Horsepower Range: 76-106

  • Tractors

  • Farmall - Model 55A - Robust Practical Tractor

    Farmall - Model 55A - Robust Practical Tractor

    The open station Farmall 55A has been created to provide a robust practical tractor that is easy to drive for the small acreage farms or rural estates and has the ability to be used on a daily basis as the support machine for larger operations. The powerful rear PTO makes grass moving, tedding, or pasture topping a breeze. On larger livestock units, the tight turning 2 wheel drive and easy direction changes of the left hand shuttle make light work of...

  • Harvesting

  • Case IH  - Model 4400 Series - Corn Heads

    Case IH - Model 4400 Series - Corn Heads

    Case IH 4400 series corn headers offer excellent picking ability in both standing and down corn, increasing grain savings in all circumstance. What’s more, they offer unrivalled ease of servicing to ensure they are ready for work in no time at all, and perform in all harvesting conditions. The dividers are key to pick up layed crop or seperate tangled corn plants. They have a considerable influence on the result of the harvest. The narrow,...

  • Balers

  • Case IH - Model RB Series - Round Balers Variable Chamber

    Case IH - Model RB Series - Round Balers Variable Chamber

    Bale diameter from 90 to 150 or 180 cm .At Case IH we listen to our customers, because we want to keep them productive especially during harvesting. That’s why the two variable chamber round balers have new features that boost productivity and extend baler life.

  • Tillage

  • Case IH - Offset Disk Harrows

    Case IH - Offset Disk Harrows

    Case IH Heavy-Offset 790 offset disk harrows perform a wide array of soil-conditioning tasks with tough, long-lasting components. Two models are available, providing a range of disk blade width and spacing options.

  • True-Tandem - Disk Harrows

  • True-Tandem - Disk Harrows

    True-Tandem - Disk Harrows

    Working widths from 22 - 47 feet: Tough field conditions call for tough tillage tools. Case IH True-Tandem™ Disk Harrows lead the industry in ruggedness and reliability so you can manage heavy crop residue with ease.

  • True-Tandem - Model 345 - Disk Harrow

    True-Tandem - Model 345 - Disk Harrow

    Case IH True-Tandem 345 disk harrows, with working widths of 22 to 47 feet, provide straight, easy pulling for primary tillage, seedbed preparation or chemical incorporation.

  • True-Tandem - Model 375 - Disk Harrow

    True-Tandem - Model 375 - Disk Harrow

    Case IH True-Tandem 375 disk harrows, with working widths of 22 to 47 feet, deliver maximum pass coverage, durability and low maintenance with agronomically sound design features.

  • True-Tandem - Model 340 - Disk Harrow

    True-Tandem - Model 340 - Disk Harrow

    The True-Tandem 340 is available in working widths ranging from 18 ft. 8 in. to 34 ft. 1 in. (5.7 to 10.4 m), and it can be used in the Spring or Fall for seed bed and crop residue management.

  • True-Tandem - Model 370 - Disk Harrow

    True-Tandem - Model 370 - Disk Harrow

    True-Tandem 370 all-purpose tandem disk. Built on a frame that is even more rugged than that of the 340 – and loaded with many of the same productivity-boosting features – the True-Tandem 370 is specially equipped for dryland and heavy residue management applications. Even the toughest soil and residue conditions are no match for this monster.

Products by McHale Engineering Limited

  • Variable Chamber Round Balers

  • Model V660  - Variable Chamber Round Baler

    Model V660 - Variable Chamber Round Baler

    Variable Chamber Round Baler - Belt Baler.Built to last and developed on some of the world's most rugged terrain, the McHale range of round balers and round and square bale wrappers is known throughout the world for durability, reliability, innovation and value for money.As with all McHale machines, the V6 variable chamber round baler range(belt baler range) has been designed with the demands of today's farmer and contractor in mind.

  • Handling Equipment

  • McHale - Model 691  - Round Bale Handler

    McHale - Model 691 - Round Bale Handler

    The McHale round bale handler is a heavy duty handler with rotating rollers that have tine reinforcement. It can be used to carry one bale of silage or spike two bales of hay or straw. Simplicity, versatility and strength are the main features of the McHale 691 round bale handler. When the 691 round bale handler is transporting wrapped bales, two adjustable rollers powered by a double-acting hydraulic ram, close to cradle and carry the wrapped or...

  • Straw Blower & Bale Feeder Range

  • McHale - Model C460  - Straw Blower & Bale Feeder

    McHale - Model C460 - Straw Blower & Bale Feeder

    The McHale C460 can be used to distribute bedding material quickly and efficiently leaving a thick aerated bed of straw. The McHale C460 can also be used to feed round bales of silage. The McHale C460 bale feeder & straw blower is a versatile machine, which can be used for feeding short fibre silage and can also be used to easily distribute long fibre fodder such as hay and straw.

Products by OPICO Limited

  • OPICO Machinery - Grain Dryers

  • OPICO - Model 355 XL - Gas Grain Dryers

    OPICO - Model 355 XL - Gas Grain Dryers

    Why get caught out by another wet harvest when OPICO's Grain Dryers have the solution. Easy to install and relocate when necessary, OPICO Grain Dryers do not require vast expenditure on handling equipment and our Gas Grain Dryers can easily dry up to 168 tons per day automatically, with minimal supervision. Using gas with 3 phase or PTO drive OPICO dryers recirculate the grain constantly to dry thoroughly and consistently...

  • OPICO - Model 395QF 9 Ton - Gas Grain Dryer

    OPICO - Model 395QF 9 Ton - Gas Grain Dryer

    9 ton approximate holding capacity. 4½ ton per hour throughput. Digital Controls. Quiet Fan (74Db). Supplied as standard with 33' custom-built, in-line centrifugal fan (74 dba). 8' diameter loading auger (50 ton an hour loading capacity). Full length 9ft 10' (3m) loading hopper. 60 ton an hour 12' diameter central auger. Centralised greaser location. Epoxy powder coated outside sheets. Adjustable screw jacks....

  • OPICO - Model 120 Eco - 12 Ton - Diesel Grain Dryer

    OPICO - Model 120 Eco - 12 Ton - Diesel Grain Dryer

    The New Magna 120 Eco is a base spec Dryer designed to give an affordable 12 ton holding capacity Dryer whilst still offering the clean burn, fuel saving technology like the rest of the magna range. Its Duax heat core retains and builds up heat ensuring a more even temperature and a clean burn. The 120's fixed screens allow even quicker setup and make it a easily mobile Dryer. Stainless steel perforated screens, 1.5mm on the outside and 2.5mm on the...

  • OPICO - Model 1200QF - 12 Ton - Diesel Grain Dryer

    OPICO - Model 1200QF - 12 Ton - Diesel Grain Dryer

    The OPICO range of Magna dryers are specifically designed with UK farmers' crops and needs in mind. The 1200QF provides efficient, clean, diesel fired drying and ease of transport. Both models use a large cross-flow centrifugal fan which is quiet and powerful. The Magna range has all the benefits of true re-circulation, better sample, improved hectolitre weight and ease of management The Eco-Flo diesel burner gives a semi-indirect burn to ensure it is...

  • OPICO - Model 1200QF - 12 Ton - Automatic Diesel Grain Dryer

    OPICO - Model 1200QF - 12 Ton - Automatic Diesel Grain Dryer

    This 1200QF Auto Electric dryer is able to load, dry, cool and unload completely automatically allowing unattended drying hour after hour. The OPICO range of Magna dryers are specifically designed with UK farmers' crops and needs in mind. Providing efficient, clean, diesel fired drying these fully automated models can be set up in conjunction with a wet holding bin and will load, dry, cool and unload automatically giving unattended drying hour...

  • OPICO Machinery - Arable Equipment

  • OPICO - Model Micro Pro 16 - Granules

    OPICO - Model Micro Pro 16 - Granules

    The Micro-Pro 16 has been developed to enable accurate application of Micro Granules such as Avadex up to 12m working widths when mounted on a variety of implements. It has 16 outlets giving a spacing of 75cm between outlets for a robust double overlapping spread pattern. Each outlet is fed by an individual metering roller ensuring even Micro granule distribution across the entire working width.

  • Variocast - Model 8 - Seeder

    Variocast - Model 8 - Seeder

    Low cost seeding with your cultivation equipment, the Variocast Seeder can be mounted on any type of implement and used for sowing crops such as rape, stubble turnips, kale and other small seeds as well as distributing slug pellets. Being ground wheel driven it maintains a consistent seedrate whatever speed the implement is working at. Drive is taken from the spoked land wheel and transmitted through a 12mm flexible drive cable to a variator gearbox....

  • OPICO Machinery - Grassland Machinery

  • OPICO - Model Air 8 - Grass Seeders

    OPICO - Model Air 8 - Grass Seeders

    Whether you are over-seeding or re-seeding pastures OPICO have a seeder to suit the job. The AIR 8 seeder is designed to fit directly onto an OPICO Grass Harrow. The seeder accurately meters and distributes the seed evenly across the width of the machine whilst the Grass Harrow opens up the soil and creates a tilth and then covers in the seed...

  • OPICO - Model Air 8E - Grass Seeders

    OPICO - Model Air 8E - Grass Seeders

    The Air 8 (E) Electronic uses the electronic control as standard with a motor to drive the metering mechanism and twin electric fans to distribute the seed through its 8 outlets on machines up to 6.5m wide.

  • OPICO Machinery - Earth Drills

Products by Ritchie Ltd

  • Ritchie Cattle Products

  • Ritchie - Calf Creep Feeder

    Ritchie - Calf Creep Feeder

    Robust all steel construction. Full length trough fed from approx. 300kgs capacity hopper. Bird-proof hopper filled from weatherproof, easily operated, sliding door at the rear of the feeder. Adjustable header rail to keep out cows. Fitted with skids for easy movement Recommended to be fixed down in exposed locations. Internal Specifications: Length 2440mm, Width 1930mm, Height 1400mm.

  • Ritchie - Basic Cattle Handling Crate

    Ritchie - Basic Cattle Handling Crate

    This basic cattle crate is hot dipped galvanised and offers the stockman an adjustable manual yoke, operable from either side. There is good access to stock all around the crate and it is fitted with rear lugs to attach to race-way hurdles.

  • Feeding Products

  • Ritchie - Barley Beef Feeder

    Ritchie - Barley Beef Feeder

    Manufactured from 1.6mm Steel Plate. Supports up to 1250Kgs. Capacity. Full Width two-part lid for easy filling. Forklift Sockets and Lifting Lugs fitted for easy Handling. Painted Finish Only.

  • Ritchie - Bottomless Feed Ring

    Ritchie - Bottomless Feed Ring

    Robust easy to handle feed ring. 18 wide feed spaces. Diameter makes it easier for young stock to feed. Solid sheet metal skirt ribbed for strength. All welded fabrication. Supplied in two easy sections for easy 6 bolt assembly. Hot dipped galvanised.

  • Ritchie Lamb Feeding Equipment

  • Ritchie - Lamb Creep Hurdle

    Ritchie - Lamb Creep Hurdle

    Robustly constructed from tubular steel. The steel rollers offer 3 width settings of 150, 190 and 225 cm. Hot Dipped Galvanised Finish. Dimensions:  1200 mm x 1000 mm high.   2500 mm x 1000 mm high.