A three point mounted blower housing designed for removing water drops to prevent cherry splitting. We use the Powerblast fan, fan housing and gearbox as a base for superb air performance. This unit has also been known to be used as a burm blower. The standard unit comes with lower scoops to keep the air in the tree. We offer a narrow internal scoop as an option for those skinny rows.
Three point mounted sprayers with axial flow blower housings. Available in 50, 75, 100, 150 and 200 gallon sizes. The 50 gallon is available with a 24' fan while the 75-200 gallon units can be fitted with a 24' or 28' fan. The 75-200 gallon units feature a heavy tubular framework with a two speed fan gearbox.
Our high end air blast sprayer series. Each has a 33' or 38' stainless steel fan housing on a heavy duty tubular frame. 300 through 1000 gallon tank sizes are available. We manufacture many of the components for these ourselves including the pump, fan housing, fan, fan gearbox, liquid strainer and CV hitch.
For our vineyard, orchard and Hop yard customers Rears has a cabinet type air plenum option in place of the standard Powerblast fan housing. The plenum evenly distribues air vertically for release in tighter plantings or where overhead drift is not desirable. This is a high end air blast sprayer using many components Rears itself manufactures. The pump, fan, fan housing, fan gearbox, liquid strainer and CV turning hitch are all made in our plant.
The Rear's Duster is used to apply sulfur or other dry matter to vine crops. The stainless steel hopper is capable of holding 300 pounds of material. Hydraulics drive both the finger type material agitation and the feeding auger. Dust is fed to the high velocity air stream and out the variable direction outlets. The 24' centrifugal air fan is driven by a two speed gearbox to allow adjustments for early season application.
The trellis boom was designed to be a simple vertical and horizontal spray boom to cover the small acreage vine crops of berries and grapes. One frame can be used for foliar application or weed control. The frame is easily fitted to our universal socket mounts on the Pak, Pul and Nifty Series sprayers. Because of its pipe socket design the spray widths can be easily adjusted by rotating the wing frames.