Robomow products

Lawn pegs are used to anchor the boundary wire firmly to the ground when laid above ground so that it does not bend over the turf. If the cable is not smooth and tight, there is a risk that the robot`s blades will cut the cable, paralyzing the entire system. In order to avoid the subsequent troubleshooting - depending on the size of the lawn - it is recommended that the perimeter wire is carefully attached right away. The easiest way to do this is with a sufficient number of lawn nails. If the scope of supply is not sufficient for the lawn area at home, this product will provide additional supplies.

This original cable is suitable for all Robomow models. If the perimeter wire is not sufficient to define the lawn or its boundaries, this product extends the scope of supply by another 100 m. The individual cable parts are then simply connected using a wire connector. The only thing to be taken into account is that individual mowing robot models are not designed for arbitrary lengths, but that there are upper limits - which are not to be exceeded simply because of the recommended area output.

If the boundary wire is not sufficient to define the zone for the mowing robot, this extension offers a solution. Simply assembled with a wire connector, the original distance is extended by 200 m. If the area is more complex and the wire already supplied with the Robomow is not sufficient, this product can help. Simply assembled with a wire connector, the original length can be extended by another 200 m. This will certainly make it possible to stake out larger lawns for the mowing robot. When laid above ground, only additional lawn nails are required. It should be noted, however, that the robot models are limited to a maximum length so that the signal transmission works without problems.