One of the most active field in the last years is that related to the Municipal Solid Waste treatment.
By the activity of tires recycling are obtained rubber granuls and rubber powder. Through the shredding and granulating, the rubber waste is reduced to the appropriate size to allow the re-use.
Paper and cardboard even if already selected during their collection, should be further separated to increase the commercial value of the prdouct itself. For that reason, SA Eng is proposing semi-automatic selection systems to separate the different kind of paper (printed or blank) and cardboard. Particular attention is given to the cardboard cores for which has been developped a specific machine for their shredding.
The plastic is the material recoverable and reusable for excellence. It can be reused many times and its recover means environmental safeguard.
Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials...
SA Eng manufactures industrial shredders dedicated to the marine industry, in compliance with the MARPOL 73/78 regulations - V, about the shredding of the food waste before it is discharged into the sea. The machines, as required by the legislation itself, guarantee a final size below 25mm. The shredders, designed to be installed on board of cruise ships, ferries, offshore platforms can also treat light material such as paper, cardboard, cans, plastic bottles etc.
Wood is presenting in various forms: wooden pallets, furniture scraps, old furnitures, ecc.. SA Eng propose for that kind of products, systems foreseeing a first volume reduction, the separation from possible ferrous parts contained in the shredded material and a final refining to get the required final size.
SA Eng. designs and manufactures single machines and / or complete plants for the treatment of Hazardous Waste. The supply can relate to the single shredder used only for the volume reduction of the material or to imply the use of a Nitrogen Blanketing System of the machine and / or of the complete system with subsequent separation of the product. SA Eng. provides for the study of customized systems in compliance with the specific need/request of each customer.