Schulte Industries Ltd. - a member of the Alamo Group products

Schulte’s SDX-117 incorporates a 38” Five paddle open center cupped style fan which improves performance and is larger than most competitive designs on the market.On the SDX-117, a 1000 RPM gear driven drive system is standard.A size 8 Bondioli power shaft is included with shear pin protection to power the blower.A Bondioli Italian made 1 piece gearbox drives this unit.A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease.

Transports at an ultra narrow width of 93” (2.36 M). Windrows 2” to 25” rocks with ease, forming them into neat uniform rows. Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protect ion against excessive shock loads. The final drive chain is totally enclosed for longer service life. The windrower drum is 14 feet (4.27 M) wide and is constructed of 8 5/8 inch (219mm) heavy wall HSS tube. Hard surfaced, 5/8 inch (15.9mm) x 6 inch thick x 6 inch (152.4mm) long teeth are welded directly to the drum pipe, resulting in problem-free operation even in difficult conditions.

Windrows 2” to 25” rocks with ease, forming them into neat uniform rows. Power is supplied to the windrower drum, via heavy duty . PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads. The final drive chain is totally enclosed for longer service life. The windrower drum is constructed of 8 5/8” (219mm) heavy wall tube. Hard surfaced 5/8” thick (15.9mm) x 6” (152.4mm) long teeth are welded directly to the drum, resulting in problem-free operation. Narrow, 8.5’ transport width

A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean,prevents water pooling and rusting and helps shed debris.

Schulte`s first 18’ Flex Wing mower. An ultra narrow transport width makes moving this unit extremely safe and simple. Run with the same HP tractor as most 15’ flex wings, but gain the extra 3’ cutting width. Excellent choice for mowing crop residue, pastures, weeds, orchards and roadsides. Single 7 gauge domed deck sheds water and debris and increases life of the deck with this easy clean feature. Available 540rpm or 1000rpm 80° CV drive or 540 equal angle non CV drive. Heavy duty gearboxes & drive system with spun formed 7gauge stump jumpers ensures durability & perfect balance

Residue Distribution Tailboard ensures maximum distribution while maintaining a safe working environment. Heavy duty drive package includes 260hp splitter box and 210hp right angle boxes. Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, reduces build up of debris and prevents rust from moisture.

30’ of mowing and shredding excellence. Accommodates 30”, 32”, 36”, 38` row spacings. Excellent shredding and distribution capabilities on Fixed Knife units. Unique drive layout allows for clutch at every down box. Spun formed pans available on pan unit. Floating hitch with rubber grommet rear suspension. Phasing system for a parallel lift cut. Non-adjustable clutches provide low maintenance. Available Cyclone Deck Debris Fan Kit. 350hp, 60 degree splitter gearbox allows for unique driveline layout

New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4` input shafts and 3” (75mm) output shaft. New extra heavy duty Bondioli G8 drive lines.  New high-torque wing clutches ensure better performance in rough cutting.Fitted with replaceable spring steel bushings at all major pivot locations to increase the ease of maintenance and life of the machine. New locations include the pivot points on the hitch, tension links, center suspension, wing suspension and all wheel standards.

New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3” (75mm) output shaft. New extra heavy duty Bondioli G8 drive lines. New high-torque wing clutches with high slip release settings ensure better performance in rough cutting. Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, eliminates build up of debris and prevents rusting on top side of deck

A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean,prevents water pooling and rusting and helps shed debris. 6.5 ” blade overlap and high blade tip speeds. A four gearbox drive line with independent slip clutches.The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes.The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4 ” 20 spine input shafts,2 3/8 ” down shafts and are rated at 210hp.