SeaMetrics, Inc. products

The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 3` to 12` pipe. With no moving parts, these meters provide unobstructed flow and are resistant to wear from debris found in ground or surface water. Little maintenance is required because there are no bearings to wear out or propellers to stop turning. Minimal straight pipe requirements allow AG2000 meters to be used in piping configurations where there is little space between the meter and an elbow.

The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3` to 40` pipe. Adapters mate with standard 1-1/2` (110/210) or 2` (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can besentfor hundreds of feet without a transmitter, over unshielded cable. This signal can be connected directly to many PLC`s and other controls without any additional electronics.

The TX100/200-Series are adjustable depth insertion turbines that come in brass or 316 stainless models to fit 3` to 40` pipe. Adapters mate with standard 1-1/2` (110/210) or 2` (150/250) FNPT threaded fittings such as saddles and weldo-lets which may be purchased either locally or from Seametrics. Ruby bearings and a non-drag pickoff give these adjustable insertion turbine flow sensors a wide flow range and long life. A sensor detects the passage of miniature magnets in the rotor blades. The resulting square-wave signal can besentfor hundreds of feet without a transmitter, over unshielded cable. This signal can be connected directly to many PLC`s and other controls without any additional electronics.

The TX800-Series are insertion turbine meters designed for use in 1-1/2` to 8` pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available in 316 stainless steel, brass and PVC. sensor bodies are machined from solid rod for maximum low-flow performance.TheTX800-Series use special fittings thatensure ease of installation and correct depth setting in the pipe. The rotation of the turbine is detected by a non-drag Hall-effect sensor. Output is a pulse-type square wave, which can be sent long distances (up to 2.000 feet) without a transmitter. This signal can be connected directly to Seametrics controls and displays, as well as PLC`s, counters, and computer cards.