Stewkley Milling Services

34 products found

products

  • Arts-Way - Model 6520 Series - Grinder Mixer

    Arts-Way - Model 6520 Series - Grinder Mixer

    When looking for a quality and consistent ration mix with the luxury of both portability and flexibility, look to the leader... look to Art's-Way. The 6520 Portable Mixer offers the largest, most innovative and productive grinder mixer on the market today. The large 165 bushel tank with a one-piece, 26 inch hammermill offers 96. 4 way reversible hardened knives and 780 sq. inch grinding area. This grinder mixer can be tailored to your specific...

  • Arts-Way - Model Cattle Maxx - Cattle Ration Processing

    Arts-Way - Model Cattle Maxx - Cattle Ration Processing

    The Art's-Way Cattle Maxx offers today's beef and dairy operations rolled feed in a quality and consistant ration mix. Both 20 and 30 inch heavy-duty rollermills are available with 10 inch diameter 5, 7 or 10 groove flat or sharp rolls. It is available in either 105 or 165 Bushel capacity. Lower horsepower requirements of the rollermill provide greater economic mill efficiency. Both flat or groove roll designs are available. The flat groove roll...

  • Cross Agricultural Engineering - Gazelle Beet Washer/Chopper

    Cross Agricultural Engineering - Gazelle Beet Washer/Chopper

    The Cross Gazelle Beet Washer was first designed for Armer Salmon who sold in to all beet growers in Europe. It uses a combination of patented cleaning and chopping elements to ensure that you can deliver a quality clean sample of beet for any application. The Gazelle can be used for the dirtiest of beet crops to ensure clean and safe cattle feed.

  • Hi Spec Engineering - Vacuum Tankers

    Hi Spec Engineering - Vacuum Tankers

    Thoughtful design and superior build quality put the Hi Spec range of Vacuum Tankers in a class of their own. All our tankers from 750 gallons (3409 ltrs) to 3500 gallon (15,911 litres) use a unique low profile spreading system, this works by using a specially shaped deflection plate to create a fan of slurry less than a metre above the ground, yet it is capable of achieving a spreading pattern up to 12 metres wide. The downward directed plate not...

Products by Teagle Machinery Ltd

  • Tomahawks- Bale Processor

  • Fertiliser Spreaders

  • Teagle  - Model 8  - Compact  Fertiliser Spreader

    Teagle - Model 8 - Compact Fertiliser Spreader

    Our Spread Pattern has been developed so that when two adjacent bouts overlap, the total amount spread is even across the full bout width. With our system it is straightforward to drive at the correct bout width by ensuring that fertiliser is thrown just as far as the last set of tractor wheelings. No rotors to change, vanes to adjust or spread widths to set. Simply adjust the spread rate as described in the instruction book and you are...

  • Teagle - Model XT20  - Fertiliser Spreader

    Teagle - Model XT20 - Fertiliser Spreader

    Our Spread Pattern has been developed so that when two adjacent bouts overlap, the total amount spread is even across the full bout width. With our system it is straightforward to drive at the correct bout width by ensuring that fertiliser is thrown just as far as the last set of tractor wheelings. No rotors to change, vanes to adjust or spread widths to set. Simply adjust the spread rate as described in the instruction book and you are ready...

  • Teagle - Model XT24 and XT48 - Fertiliser Spreader

    Teagle - Model XT24 and XT48 - Fertiliser Spreader

    Choose a spreading system that naturally eliminates errors and produces outstanding results. Wind, driving errors and variation in fertiliser can combine to result in an uneven spread pattern. The gentle taper of the 'triangular' spread pattern produced by the XT24 and X48 distributes any error across the full width of the bout. Conversely, outward spinning systems typically produce a trapezoidal pattern which focuses errors in the lapped...

  • Teagle - Model SE Series  - Fertiliser Spreader

    Teagle - Model SE Series - Fertiliser Spreader

    Teagle promotes the quadruple overlap distribution system. This robust spreading pattern is incredibly tolerant to sources of inaccuracy such as wind, variation in fertiliser characteristics and driver error. Teagle offers a range of fertiliser spreaders that fulfils all European standards relating to accuracy of distribution and border spreading. The winning combination of the Accu Rate delivery system with a robust quadruple overlap...

  • Muck Spreaders

  • Grassland

  • Dynamo - Finishing Mower

    Dynamo - Finishing Mower

    Outstanding Performance: Overlapping rotors ensure 100% cutting over the full width to produce a high quality professional finish. Fit the optional mulching kit for a finer finish. Click here for more details.

  • Single Spindle Pasture Toppers

    Single Spindle Pasture Toppers

    All models incorporate a range of features to ensure ease of operation and maintenance.  Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine. All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

  • Belt Driven Pasture Toppers

    Belt Driven Pasture Toppers

    All models incorporate a range of features to ensure ease of operation and maintenance. Our Toppers incorporate high strength pressings and an impressive driveline and blade system resulting in a very robust machine.  All machines built at our factory in Cornwall are now Shot Blasted and finished with Powder Coat paint for outstanding durability.

  • Flail Mowers & Forestry Mulchers

  • Mini-Garden Flail Mower

    Mini-Garden Flail Mower

    Available in three cut widths from 1.15m, 1.25m, 1.45m. Suitable for mulching light grass and general amenity areas. From 12HP to 25HP / Category 1 linkage . PTO speed 540 rpm. Rear mount only

  • Swath Conditioners

  • Super-Ted - Swath Conditioners

    Super-Ted - Swath Conditioners

    Engineered specifically for the heavy crops found in the UK, our attention to detail delivers unparalleled performance in the field in both grass and straw applications. The Super-ted 160 has a 1.6m. wide pick-up and is ideal for silage, straw from smaller combines (up to 16' header width) and hay. The Super-ted 221 has a 2.2m. wide pick-up and is suitable for silage (will do two 3m. swaths side by side), straw from all modern combines and hay.

  • Tillage & Cultivation

  • Roterra  - Power Harrow

    Roterra - Power Harrow

    Medium duty - 25 Series : 2.5m working width. Heavy Duty - 35 series : 3m and 4m working width. Very Heavy Duty - 55 series - 3m and 4m working width. Models rated from 100HP to 200HP / Category 2 linkage .  Compact combination unit when fitted to Polymat Pneumatic Drill

  • Multidisc - Disc Harrow

    Multidisc - Disc Harrow

    Multidisc - Heavy Duty : 510mm disc diameter. Multidisc XXL - Very Heavy Duty : 610mm disc diameter.  Models rated from 70HP upwards / Category 2 & 3 linkage . Available with optional Polymat Compact Pneumatic Drill. Hydraulic folding options available up to 12m

  • Multidisc Vario - One-Pass Cultivator

    Multidisc Vario - One-Pass Cultivator

    Vario 250 - 2.5m working Width - 4 tines. Vario 300 - 3.0m Working Width - 6 tines. Models rated from 100HP to 200HP / Category 2 linkage . Available with optional Polymat Compact seed drill

  • Polymat  - Pneumatic Drill

    Polymat - Pneumatic Drill

    Polymat universal metering device for Cereals and Prilled Seeds, hopper capacity of 820 litres. The metering unit is fully adjustable and has a reduction setting for the use of fine seeds. A cleaning brush is supplied as standard. The seeds are dropped into the air flow and transported via a specially shaped evevation column, then distributed evenly to the tubes by the distribution head. Output rate of 1 to 360 kg/ha (Peas and Beans approx. 450 kg/ha)...

Products by Cross Agricultural Engineering Ltd.

  • Beet Products- Beet Washer

  • Gazelle - Beet Washer/Chopper

    Gazelle - Beet Washer/Chopper

    The Cross Gazelle Beet Washer was first designed for Armer Salmon who sold in to all beet growers in Europe. It uses a combination of patented cleaning and chopping elements to ensure that you can deliver a quality clean sample of beet for any application. The Gazelle can be used for the dirtiest of beet crops to ensure clean and safe cattle feed.

  • Beet Products- Cleaner Loader Range

  • Beet Cleaner / Loaders

    Beet Cleaner / Loaders

    The Cross Cleaner Loader was first designed for Armer Salmon who sold in to all beet growers in Europe. It uses a combination of patented cleaning elements.

  • Beet Products- Beet Chopper

  • Beet Chopper

    Beet Chopper

    The Cross Beet Chopper is top of the range when it comes to stationary beet choppers. The Chopper uses pattented Cross chopper technology to chop beet of various sample sizes. This machine is also fitted with a hydraulic safety door to make way for foriegn objects such as stones. This unit has a 10 foot hopper to make way for any bucket size used with the conventional tractor bucket being only 8 foot wide. Large hopper extensions can be fitted...

  • Slurry & Manure Products- Slurry Agitator Range

  • Model SA1 - Slurry Agitator Pump

    Model SA1 - Slurry Agitator Pump

    The Cross SA1 Agitator is made entirely of 6” pipe for high output. This model of slurry pump is designed entirely for the farmer with only one tractor. It can be disconnected from while in the tank and a top link is not needed to attach to the agitator. Any tractor from 60Hp up can handle this machine due to the different ratio gearboxes proved by Cross Agricultural Engineering. All Cross Agitator Pumps cannot block with round bale silage...

  • Slurry & Manure Products- Muck Spreaders

  • Muck Spreader

    Muck Spreader

    The Cross Muck Spreader Range has been designed to satisfy both farmer and contractor needs. The robust and well manufactured machine uses twin vertical beaters to shred and spread a range of agricultural and industrial manures.This machine comes in sizes ranging from 6-14 tonnes.The Cross muck spreader was built with strength in mind using box section, commercial axle, twin floor chain and heavy duty drive mechanisms. All these machines are...

  • Slurry & Manure Products- Slurry Tanker

  • Recessed Tanker

    Recessed Tanker

    The Cross Recessed Tanker Range is built to the highest standards by a team of dedicated engineers using quality materials and manufactured in the latest high-tech manufacturing facilities. Cross Tankers are manufactured from high quality 6mm steel. All tankers are rotary welded for even welds and uniform accuracy. All tankers are oven baked in our state of the art spray booth and galvanising is also available. A Trailing Shoe...

  • Tillage Products- Ring Roller

  • Model HD 6 Meter - Ring Roller

    Model HD 6 Meter - Ring Roller

    The Cross HD Ring Roller has been designed to ensure efficient compaction of the soil, so as to create the ideal conditions for crop growth. All rollers have steel rings and are fitted with hardened EN24T shafts for extra strength in tougher conditions. The HD roller can be fitted with 1 rows of tines or paddles.  This model roller cannot be fitted with a second row of tines or paddles unlike the HDEX model which has a heavier...

  • Tillage Products - Front Furrow Press

  • Model 1800 - Front Furrow Press

    Model 1800 - Front Furrow Press

    The Cross 1800 Front Furrow Press has been designed to ensure efficient compaction of the soil, so as to create the ideal conditions for crop growth. The robust and well manufactured machine will reduce your cultivation time and costs. The furrow press can be fitted with 2 rows of tines and/or paddles. The rows of tines are all individually adjusted. This machine can be also fitted to tractors without front linkage .The 1800 is equipped with...

  • Tillage Products -Trailed Furrow Press

  • Model 3000-2 - Furrow Press

    Model 3000-2 - Furrow Press

    The Cross 3000-2 Furrow Press has been designed to ensure efficient compaction of the soil, so as to create the ideal conditions for crop growth. The robust and well manufactured machine will reduce your cultivation time and costs. The furrow press can be fitted with 3 rows of tines and/or paddles. The rows of tines are all individually adjusted and the tine depth can be controlled from the cab of the tractor.

  • Tillage Products -Flatlift

  • Flatlift

    Flatlift

    The Flatlift was designed to improve soil structure and increase yield potential. Renowned low running costs, high build quality and efficient subsoiling action, makes the Flatlift the most profitable choice for your subsoiling, single pass combination. The flatlift improves drainage and aeration in pasture land without disturbing top soil. Also by improving the soil structure, the Flatlift allows stronger root growth, giving crops increased yield...

  • Tillage Products - Scarifier / Re-seeder

  • Scarifier / Re-Seeder

    Scarifier / Re-Seeder

    The Cross Scarifier / Re-seeder is built to the highest standard to cope with a wide range of ground conditions. The seeder is designed for re-generation, re-seeding and repairing. The Cross Scarifier is fitted with 2 rows of spring tines with an optional 3rd row available. The seeder is fitted with a stocks fan jet as standard and has various other seeder options available.