Suttle Equipment, Inc.

20 products found

products

  • Delimbers

  • CTR - Model 320/426 Series - Delimbers

    CTR - Model 320/426 Series - Delimbers

    The CTR 320 and 426 Delimbers are designed for maximum productivity, reliability, and component life and help you get the job done quickly and efficiently.

Products by Prentice

  • Machine

  • Prentice - Model C Series - Wheel Feller Bunchers

    Prentice - Model C Series - Wheel Feller Bunchers

    The new Prentice C Series wheel feller bunchers raise the bar to lower your owning and operating costs by improving serviceability, performance, stability, agility, reliability and operator comfort.

  • Knuckleboom Stationary Mount Loaders

    Knuckleboom Stationary Mount Loaders

    Prentice has a full line of stationary mount loaders for a wide range of mill yard applications. Three size models are available with onboard or remote power. Prentice stationary mount loaders are completely pre-wired, tested and ready for on-site electric hookup, including installation kits with the required fasteners for mounting to steel or concrete pedestals. And with the Prentice patented Resilient Pad Mounting system, your workday will be...

  • Model 2384C & 2484C - Knuckleboom Trailer Mount Loaders

    Model 2384C & 2484C - Knuckleboom Trailer Mount Loaders

    Prentice Trailer Mount Loaders feature hydraulic systems that provides smooth performance and fuel efficiency. High swing torque, swing speed and lift capacity reduce cycle times and lower cost per ton. The heavy-duty booms and structures provide reliable operation and reduce service costs. Spacious work stations, excellent visibility, and ergonomic controls reduce operator fatigue, resulting a more productive shift. A wide range of machine sizes...

  • Work Tool Attachments

  • Model MR-244 - Brush Cutters

    Model MR-244 - Brush Cutters

    The MR-244 Rotary Ax cuts and mulches single trees up to 18 cm diameter. The MR-244 Rotary Ax Brush Cutter cuts and mulches single trees up to 18 cm diameter with an average mowing rate of 1000 m2 to 6000 m2.The MR-244 features a hydrostatic motor, discharge containment area and new motor mounting shaft and bearings.

  • Model 320 and 426 - Delimbers

    Model 320 and 426 - Delimbers

    The 320 and 426 delimbers are designed for maximum productivity, reliability, and component life and help you get the job done quickly and efficiently. Choose the 320 with its three-knife design and 31-inch throat opening for small to medium softwoods and small hardwoods. Or step up to the 426 with its four-knife design and 34 3/8-inch throat opening for larger wood sizes and multiple stem thinning applications.

  • Felling Heads

    Felling Heads

    Center post saws with versatile sawheads used for felling small, medium and large stems.

  • Prentice - Grapples

    Prentice - Grapples

    Built tough to deliver outstanding performance in all types of logging and material handling applications.Prentice grapples are built tough to deliver outstanding performance in all types of logging and material handling applications. Rotator models are available to meet the job requirements of every logger. Jaws are constructed of special high-tensile wear resistant steel. Critical areas of the jaws are reinforced and designed to protect the...

  • Prentice - Model PF-48 - Harvester Heads

    Prentice - Model PF-48 - Harvester Heads

    Highly efficient, productive harvester heads field proven in multiple applications around the world.The PF-48 is a fixed controlled fell harvester head providing complete control of felled trees to the operator. This control allows the operator to cut and position trees during select thinning of hardwoods, the focal application for the PF-48, without damaging the residual stand. The one-of-a-kind four roller design has been field proven in tough...

Products by Cutting Systems, Inc.

  • Slasher Saws

  • Model DL-4400 - Classic Slasher Saw

    Model DL-4400 - Classic Slasher Saw

    The DL-4400 has what CSI calls a DOG LEG (DL) style saw box which gives the loader operator a better view plus more grapple room when pulling the tree stems up for the next cut. It is built from high strength tube and alloy steel by skilled workers to create a machine that is strong and durable. New innovations such as four larger 3/4 inch bar mounting bolts and a hydraulic cushion bar stop help maximize bar speeds. A one turn cam type chain adjuster...

  • Model DL-4400 - Revolver Saw

    Model DL-4400 - Revolver Saw

    The CSI Model DL-4400-R Revolver features a saw box that rotates to accomodate a left or right handed load operation. This allows the operator to orient the saw box in either position quicker and easier. The DL-4400-R also features a redesigned chassis construction to help keep the stems flat for smooth, clean cuts on uneven ground. As with our other saws, the Revolver is built from hi-alloy tubing and hi-alloy steel plate by skilled workers to ensure...

  • Delimbers

  • Model PTD-264 - Ultra Delimber

    Model PTD-264 - Ultra Delimber

    This 4-knife pull-thru delimber comes equipped with an integrated topping saw. It is suited for use in hardwood or pine. The 72' wide throat opening, a special roller, and our unique knife design makes delimbing trees smooth and easy. It comes mounted on a cradle constructed of high alloy steel. We also use top quality rotation bearings, pivot bushings, and rollers. Its ease of operation yields maximum production.

  • Model PTD-264 NTS - Delimber

    Model PTD-264 NTS - Delimber

    Our PTD-264-NTS is designed with the same rugged features and quality as our PTD-264, without the integrated topping saw for operators who do not require that option.

  • Model PTD-203 - Delimber

    Model PTD-203 - Delimber

    This 3-knife pull-thru delimber features a 20' throat opening. It is designed for less productive contractors harvesting pine and hardwood using smaller knuckle boom loaders. Available with or without a topping saw.

  • Delimber Trailers

  • Model DT-2500 - Delimber Trailer

    Model DT-2500 - Delimber Trailer

    The DT - 2500 Delimber Trailer was designed with mobility and flexibility in mind. Made with a single heavy-weight I-beam rail, the DT-2500 offers easy towability to and from the jobsite, and allows the operator to position it exactly where required for optimal production. The DT-2500 also features a heavy-duty 22,000 lb axle and 1100-22.5-12ply tires. The DT-2500 is equipped with highway lighting and a fixed front spade, and is available with your...

  • Model DT-2600 - Delimber Trailer

    Model DT-2600 - Delimber Trailer

    The DT - 2600 Delimber Trailer has same rugged features and mobility as the DT-2500 Delimber Trailer, but with heavy-weight dual channel construction. This allows you to carry one of our slasher saws on the trailer chassis during transport. The DT-2600 is also equipped with highway lighting and a fixed front spade, and is available with your choice of PTD-143, PTD-243, PTD-264, or PTD-264-NTS delimbers.

  • Model IDT-2800 - Independent Delimber Trailer

    Model IDT-2800 - Independent Delimber Trailer

    The IDT-2800 is a self-contained power unit including a diesel engine, hydraulic power pack, and radio remote which allows you to run our delimbers without attachment to loader hydraulics.

  • Felling Head

  • Model DFH-3526 - Grapple Felling Saw Head

    Model DFH-3526 - Grapple Felling Saw Head

    The model DFH-3526 is a grapple felling saw head designed for use on excavator-type carriers. The saw head incorporates a dangle hook-up system, and features bar and chain cutting technology. Expertly designed, and built from the finest alloy steel, our saw head is rugged and robust enough to withstand the daily punishment of a logging operation. The DFH-3526 is equipped with a 3/4 pitch chain, running on a 37”...

  • Other Products

  • Model 1850  - Firewood Processor

    Model 1850 - Firewood Processor

    The model 1850 is a one man portable firewood mill designed for ease of operation, high production and low maintenance. CSI employees have had years of experience in building firewood processors and was the original builder of the CTR model 1800 firewood processor. With all of our experience in the hydraulic chain and bar slasher saws, CSI has developed these firewood mills to be the highest quality, safest and most productive available. The model...

  • Model 6500 - Remote Power Unit

    Model 6500 - Remote Power Unit

    The model 6500 Power Unit provides an alternative hydraulic power source for slasher saws used in applications where the need for loader mobility prevents the slasher from being connected in a conventional manner. In most cases, the remote transmitter is wired to switches in the joystick handle allowing seamless operation of the loader and slasher. The remote sending unit can be easily moved from one loader to another. The radio has a range of several...