Swan Net-Gundry Ltd products

The first version of Dyneema SK60 later replaced with SK75, offers exceptional strength and axial stiffness. If thicker diameter is preferred for handling or holding instead of strength DynIce 60 can be suitable choice.

Conventional construction of 12 single strand braided rope from Dyneema SK 75 impregnated with Durapur.

Reliable, proven and the most popular 12 strand braided rope of 100% Dyneema SK75 fibres impregnated with Duracoat for protection and improved abrasion resistance. Very suitable rope for all kinds of applications.

The DynIce Ultrabend 75 is based on the new bending fatigue resistant fibre Dyneema XBO. The bending fatigue tolerance is up to 5 times higher than for DynIce 75 and therefore very suitable for running rigging which has to tolerate lot of bending under high load.

The accurate distance between the streamers is of high importance and not least how the distance will keep for the lifetime of the separation rope. DynIce Dux is free of constructional elongation and will not change from initial setup throughout its working life. During setup the splices are also pre-tensioned to remove elongation form the from splice itself.

DynIce Warps are a revolution in trawling. They are a proven way in pelagic fisheries to reduce weight, increase trawl opening, improve handling and reduce fuel consumption during trawling. The warps use most advanced patent pending and complex design for a winch line for deep sea lifting and lowering as well as for towing fishing trawls. The rope consists of 6 different layers to give it very high cross-sectional stability and axial stiffness. DynIce Warps are a revolution in trawling. They are a proven way in pelagic fisheries to reduce weight, increase trawl opening, improve handling and reduce fuel consumption during trawling. The warps use most advanced patent pending and complex design for a winch line for deep sea lifting and lowering as well as for towing fishing trawls. The rope consists of 6 different layers to give it very high cross-sectional stability and axial stiffness.

The Dynet is made solely of Dyneema® high performance fibres from DSM and impregnated with special solvent based material to increase stiffness and durability. The netting knot is double and the twine design optimizes knot strength, knot stability and high durability. Lowest drag compared to any other knotted netting types.

Braided netting made from nylon (polyamide) multifilament’s with high elasticity and high breaking load and elongation to break. The elasticity gives the netting a higher ability to meet extreme loads compared to other materials like polyethylene and polypropylene. Heatset and impregnated with best available materials to ensure stability and endurance.

Twisted twine netting with high elasticity and high strength obtained with accurate twisting levels, tensioning and heat setting after impregnation. The nylon (polyamide) multifilament fibres used are of highest available quality and originated in Europe.

Braided high density polyethylene netting with maximum strength to diameter ratio to minimise drag during towing. The twine is round and compact and core and cover are engineered to optimise knot breaking strength.