Tomenzoli F.lli products

The COMBINED STONE PICKER RST/520-S - SPECIAL is equipped with side windrowers, allowing the machine to operate at a total working width of 3,600 mm.; the stones can be collected on any type of soil, both untilled and hard soil, or tilled and cultivated soil. The side windrowers are hydraulically and separately operated, and the working width can be regulated according to the needs.

The machine is equipped with a vibrating pick-up permitting to collect stones, the diameter of which can vary from 20 to 600 mm, with no reduction at all in the wear down of the stone collecting components. Stones can be collected in any type of land, both rough and hard, tilled or untilled ground, in open fields or along windrows. The stone picker is hooked to the fixed hitch of tyred or tracked-type tractors and, with no need of extra gear reduction unit, can be operated by means of a clutch-cardan linked to 540 rpm P.T.O. Thanks to a movable grid and a vibrating pick-up, even the smallest quantity of earth is discharged back onto the ground.

The machine is equipped with a vibrating pick-up permitting to collect stones, the diameter of which can vary from 20 to 600 mm, with no reduction at all in the wear down of the stone collecting components. Stones can be collected in any type of land, both rough and hard, tilled or untilled ground, in open fields or along windrows. The stone picker is hooked to the fixed hitch of tyred or tracked-type tractors and, with no need of extra gear reduction unit, can be operated by means of a clutch-cardan linked to 540 rpm P.T.O. Thanks to a movable grid and a vibrating pick-up, even the smallest quantity of earth is discharged back onto the ground.

The machine is equipped with a vibrating pick-up permitting to collect stones, the diameter of which can vary from 20 to 600 mm, with no reduction at all in the wear down of the stone collecting components. Stones can be collected in any type of land, both rough and hard, tilled or untilled ground, in open fields or along windrows.

The STONE WINDROWER RT/2500-FM, equipped with special tines - Rock Version - has a working width of 2,500 mm and it allows to gather stones in rows so as to reduce the stone collection time for the stone picker machine, clearing so from stones huge areas in a speedier way, both for preparing agricultural grounds ready to be seeded, and for creating parks, gardens or sports fields.

The windrower allows to gather stones in rows so as to reduce the collection time of stone pickers, clearing so huge areas from stones in a lesser time. The stone windrowers RT/3000-FM and RT/4000-FM can arrange in rows stones of 20 to 600 mm diameter. The machines are tractor power take-off-operated, to which a friction cardan for safeguarding the pick-up mechanical parts is connected.

THE NEW HOER/RIDGER R/S 1800 EC -Economical version- is the ideal machine for carrying out works between rows of vines, orchards and olive-groves. The combination of ploughshare and motor-driven disk, as well as the high sensitivity of the tracer, allow to carry out an optimal work and to obtain special performances, even in the presence of very young plantations. By a simple rotation of the machine head the ridging work can be carried out. Being the machine equipped with a transverse frame, the width of the machine can be varied according to the job requirements. By request, the frame transverse can be also hydraulic operated. The machines are manufactured entirely in our factory in Monzambano (Mantova) Italy. Features, dimensions and weights are indicative. The Firm Tomenzoli reserves itself the right to modify them without notice.

This innovative agricultural machine R/S 2001 F.I. conceived to operate amidst rows for hoeing and ridging in vineyards, orchards and olive-groves, is the first in absolute of its kind equipped with fully hydraulic tractor-operated components. Unlike the system mechanically controlled and equipped with rubber-coated cables, this system allows very precise controls. Moreover, being the working head vertically adjustable by means of an hydraulic jack, the machine can operate on any type of soil and in presence of any slope.

The FRONT-OPERATED HOER/RIDGER Type R/S 2002 F.I., UNIVERSAL and UNIQUE IN ITS KIND for cultivation amidst rows, is used for hoeing and ridging in vineyards, orchards and olive-groves. It is the first machine in absolute that by a simple operation can be coupled to the front of a tractor, even if the latter is not equipped with a hydraulic front hoist and/or power take-off.

Equipment to be coupled in front of tractors equipped with front hydraulic powerlift, or to the flange coupling for those tractors not supplied with front power-lift. It is also possible to mount a separate hydraulic system or use the tractor hydraulic system, equipped with a 30 lt pump, at least.