Ursus S.A. products

In Ursus C-350 you will find everything that you have respected in its predecessor, but also much more. The new tractor is cheaper and has much more options compared to Ursus 5044. It is the smallest machine in the series marked with the letter C, which will work in various types of tasks. The tractor is ideally suited for orchard work, but it can also be used in agriculture and in the municipal economy. Due to its size, it is often used, among others while spraying, however, a wide range of options makes it ideal also for other tasks. Quiet, comfortable, surprisingly strong. This is the C-350 mode!

A small and clever partner on every farm - small footprint, low tare weight reduces the time spent on maneuvers - which directly affects the efficiency and effectiveness of work. The very small turning radius (56 degree steering angle) ensures unmatched maneuverability thanks to the front axle with the angle gear. Two types of transmission: 3-stage hydrostatic. Synchronized mechanical Low weight, enabling efficient use of tractors in a wide range of municipal, orchard and gardening works.

Engine- original PERKINS engine 4 cylinders with turbocharge. Carraro Transmission and synchronized gear box 12x12 with reverse. Four pillars cabin.  in roomy and comfortable version. 2x2 quick hydraulic coupling (in rear). Pneumatic installation with one or two circus for trailer’s brake system. Upper hitch – adjustable. Rear three pint linkage with capacity 2650 kg. Torsional front fenders. Modern ergonomic bonnet. Wide range of utilization.

Deutz EU IIIB engine. 24x12 gearbox with powershuttle. Hi-LO powershift and creeper. lift capacity up to 3600 kg. 4-post cabin with sunroof for excellent visibility.

Deutz EU IIIB engine. 24 x 24 gearbox with Hi-Lo powershift. lift capacity of 4400 kg. 4-post cabin with sunroof for excellent visibility

Control valves used in TUR loaders have, as a standard the `FLOATING` function which is extremely useful while working in a contact with the ground (gathering up with the bucket, snow plough operation, etc.). On an uneven ground the `floating` function protects the loader`s tools from damage.

MIKRUS-series of back-hoe loaders are mounted on a three-point linkage of a tractor. They are intended for various loading and unloading operations, transport of loose and volumetric materials, as well as for carrying out various earthworks on farms. Since there are many types of this machine and various tools, the machine can be fitted with the needed tool easily.

The rake is designed for raking freshly mown, semi-dry and dry grass and other green fodder (lucerne, clover, cereals mixed with leguminous plants) into lengthwise windrows, prepared for gathering with the use of swath pickers, balers or forage harvesters. The Z-554 rotary rake can be used on soft land (arable land, meadows), on flat land as well as on even hilly ground up to 12% of slope.

The Z-543 and Z-594 round balers are intended for baling straw material (up to 25% moisture) from 1900 mm wide windrows and dry off green fodder (up to 40-60% moisture) intended for hay silage. The material is rolled into bales of 1200 mm diameter. Unlike Z-543 baler, the Z-594 model has a rotor with cutting system (14 - knifes), ensuring uniform ensilage and better digestion quality of the feed. Bales made by Z-543 baler are bound with string as standard; optionally they can be bound with a net. Z-594 baler is provided with a net binding system only. Both balers are equipped with acoustic and light indicators signaling filling up of a chamber. The round balers are fully suited for road transport.

The Z-586 bale wrapper is a modern, trailed machine which helps to use the work time to the very maximum by using a front bale loading system while following the baler. The machine operator is not wasting time on maneuvering the whole set, directing the wrapper on a bale, driving perpendicularly to the direction of the baler. Bales can be wrapped on the move. The wrapper is provided with a bale layer for smooth bale discharge, allowing to operate on slopes. The loading arm easily picks up bales of up to 1000 kg of weight. The use of 750mm wide foil saves the wrapping time; to apply 4 layers of foil the bale must be wrapped 16 times only and not 24 times like with 500 mm wide foil. The effective wrapping time is reduced by approx. 33 %. The setting of drawbar from working to transport position and vice versa is hydraulically controlled. All the wrapper functions are automatically controlled from the tractor cabin. The wrapper is fully suited for the road transport.