Utility Terrain Vehicle (UTV) Hitch Works products

Includes UTV-XSE (Rear Skid Plate) and UTV-XTC (Transmission Cover). Both products are fully bolt-on and can install in about 5 minutes. Fits 2014-Current Models. Attach to any RTV-X900, x1100, x1120, x1130, x1140 and RTV-X. Increase the protection for the rear of your RTV-X.

Farmboy Sport X is a versatile 3-point hitch system that works on Kubota RTV-X900, X1100C, X1120D and RTV-X1140s.  It can easily be attached to either the front or the back of your RTV-X to maximize its utility.

This RTV-X Transmission Cover (UTV-XTC) provides crucial protection to a vulnerable area of the RTV-X.  This part covers the transmission of the RTV-X, greatly lowering the possibility of damage to that area.  Being fully bolt-on, this additional plate can be installed in just a few minutes.  Able to attach to the RTV-X900, X1100, X1120, X1130, X1140 and the RTV-X this Transmission Cover is designed to work with either the factory rear plate or our Rear Skid Plate + Receiver Hitch Extension.  Also, the transmission cover will not interfere with the dump bed in any way.

Fast Attach Windshield – RTV-X– This 1/4″ Lexan polycarbonate windshield will make your ride much more comfortable by providing shelter from wind, dust and other inconvenient things. This Fast Attach Windshield can be mounted in under 15 seconds! Being made out of 1/4″ Lexan polycarbonate, this windshield will not bow or bend while driving. The design of our windshield creates a firm product with no flapping. It is also shaped to the contour of the roll bar. It also leaves a gap between the roll bar and the windshield to allow for an easy handhold on entering or exiting the RTV-X. This windshield is currently fitted for the Kubota RTV-X900, X1120, X1140 and Kubota XG850 Sidekick

Bulkhead Bed Extension – This Bulkhead Bed Extension is made out of 14 gauge steel and extends the wall of the dump bed closest to the cab up an additional 10 inches, protecting the engine compartment from debris (i.e. leaves, mulch, dirt) that would otherwise fall down and damage the vehicle. It also extends 60 inches in width, covering the full width of the dump bed. This Extension is designed to work on the Kubota RTV-X series – RTV-X900, X1100c*, X1120 . With a straight forward installation that should only take about 10 minutes, it is very easy to protect your RTV-X from the harmful effects of debris in the engine compartments. This Bulkhead Bed Extension is available in a powder coated black. If the RTV-X1100c has the screen guard over the rear window this product will not fit.

Adjustable 2/4 Knife Liquid Fertilizer Applicator – This is our Adjustable 2/4 Knife Liquid Fertilizer Applicator. It’s perfect for use by hobby farmers and food plotters on a smaller farm to fertilize sweet corn, pumpkins, beans, or any other produce. This Fertilizer Applicator has either power or gravity controlled flow, with a power sprayer for above ground application. With its 15 gallon tank, this Applicator is perfect for an acre of fertilizing, and is designed to be used by 15-30 Horsepower vehicles. This makes the Fertilizer Applicator usable by any small tractor or UTV. We have even created a 2 knife version for ATVs. The Applicator comes with 2 stands, one on either end, which fold up and down easily for simple, quick storage when not in use.

The Farmboy is a versatile 3-point hitch system that works on Kubota RTVs using only the original dump bed hydraulics. It can easily be attached to either the front or the back of your RTV to maximize its utility. It can be used to attach your planter, cultivator, watering system, seeder, lawn dethatcher, arena conditioner, snow plow or one of many 3-point hitch attachments that previously could only be used by a compact tractor.The Farmboy comes fully assembled and can be easily taken on and off your RTV in less than 15 minutes with no changes necessary to the already existing equipment.

The Farmboy HD has been developed for the Bobcat Toolcat 5600. This implement has a lifting capacity of 1000 lbs., while being able to apply 1000 lbs. of down pressure. It also has a unique 30 second quick attach system, currently patent pending. The Farmboy HD can be left on as a permanent 3-point hitch, although, due to the ease with which it can be removed and replaced, this is not necessary. Total installation time for the Farmboy HD is 5 minutes. Being a standard Category 1, 3-point hitch, the Farmboy HD adds much more versatility to the Toolcat 5600.

The Farmboy Pro – This version of our hydraulic 3-point hitch, The Farmboy Pro, is designed for use on the Toro Workman HD. Total installation time is roughly 15 minutes and requires no drilling or welding at any point in the installation process. The quick-connect hydraulic couplings even make switching the lines quick and easy. The Farmboy Pro runs entirely off of the standard auxiliary hydraulic capability already present in the Workman HD line for the hydraulic dump bed.

The Farmboy Sport is our 3-point hitch for the Kubota, Kioti, Cushman and Bad Boy Buggies.  Capable of lifting 400 lbs., this standard Category 1 hitch is perfectly suited to turning your UTV into a machine capable of planting or aerating.  With its available down pressure, the Farmboy Sport is even more beneficial, eliminating the need for weights to be placed on an aerator.