5 products found

Products

  • Model VH400 - Soil Moisture Sensor Probes

    Model VH400 - Soil Moisture Sensor Probes

    Our VH400 series soil moisture sensor probes enable precise low cost monitoring of soil water content.  Because our probe measures the dielectric constant of the soil using transmission line techniques, it is insensitive to water salinity, and will not corrode over time as does conductivity based probes. Our probes are small, rugged, and low power.  Compared to other low cost sensor such as gypsum block sensors, our probes offer a rapid...

  • Vegetronix - 8 Inputs USB Soil Moisture Sensor Reader

    Vegetronix - 8 Inputs USB Soil Moisture Sensor Reader

    This low-cost no-frills data logger is perfect for reading up to 8 Vegetronix soil moisture sensors.  It reports sensor data back to a host computer via USB, or it can run stand alone and store data to non-volatile memory, for later retrieval. Setup is very quick, with screwless terminal blocks. When connected via USB, the device is powered from the USB cable. It can also be powered from batteries with a wide supply range of 5 to 24V.

  • Vegetronix  - Model SDI-12 to RS232  - Translator Board

    Vegetronix - Model SDI-12 to RS232 - Translator Board

    Quickly turn your PC or modem into a SDI-12 compliant data logger, with the Vegetronix SDI-12 RS232 translator board.The translator will connect to your PC or modem through a RS232  interface, and allow you to communicate with SDI-12 compliant sensors  with simple serial commands.You can use any serial port communication program such as the HyperTerminal program which is installed on all Windows platforms, to communicate with the device...

  • Model SDI-12  - USB Translator

    Model SDI-12 - USB Translator

    Quickly turn your PC into a SDI-12 compliant data logger, with the Vegetronix SDI-12 USB translator board. The translator will connect to your PC through a USB interface, and allow you to communicate with SDI-12 compliant sensors  with simple serial commands. The USB port emulates a serial port so you can use any serial port communication program such as the HyperTerminal program which is installed on all Windows platforms, to communicate...