Vennings products

Features mechanically driven auger with maximum efficiency.  Self-Propelled and hydraulic raise, lower & steer for fingertip control with ease of operation and ease on the back. Simply sit on the seat and drive around. All moving parts are guarded for your protection & peace of mind. Make the right choice with a Vennings fully self-contained premium quality self-propelled auger. Increased capacity with our larger pickup intake flight. 9" Auger Capable of up to 2 ton per minute. 10" Auger Capable of up to 2 1/2 ton per minute. 11" Auger Capable of up to 3 ton per minute.

Features mechanically driven auger with maximum efficiency.  All moving parts are guarded for your protection & peace of mind. Make the right choice with a Vennings premium quality auger. Increased capacity with our larger pickup intake flight. 7" Auger Capable of between 15-18 bags per minute or up to 1 1/2 ton per minute. 9" Auger Capable of between 20-24 bags per minute or up to 2 ton per minute. 10" Auger Capable of between 30-36 bags per minute or up to 2 1/2 ton per minute. Illustrated 35` X 9" Auger with optional Jelbart shifter lifter third wheel system, new tyres & silo winch Fitted

Features mechanically driven auger with maximum efficiency. PTO driven, push around auger with optional third wheel system to eliminate lifting while moving auger around. All moving parts are guarded for your protection & peace of mind. Make the right choice with a Vennings premium quality auger. Illustrated 50` X 9" Push Around Shaft Driven PTO Drive Grain Auger Drive Section.

Features mechanically driven auger with maximum efficiency. Centrifical clutch drive. All moving parts are guarded for your protection & peace of mind. Make the right choice with a Vennings premium quality auger. Illustrated 25` X 6 1/4" Auger with 10 H/P Vanaguard motor.

Illustrated 20` X 4" Auger on standard adjustable height frame with motor and cover fitted. Although very basic, our 4" & 5" augers are fantastic for shifting small volumes of grains and materials.  Especially good for hammer mills and grain cleaners. 4" augers capable of 2-3 bags/minute, 5" augers capable of 4-5 bags/minute. All the augers include belt, pulleys, pulley cover motor mount and bottom support. 1, 1.5, 2 & 3 H/P electric motors are available.  1440 RPM totally enclosed fan cooled, capacitor start and overload protected.  The motor is pre-wired with approximately 2 metres of flex.

Suitable for up to 4 Waterproof Cameras: Touch button with fingertip operation. Day / Night brightness controls. Supplied with centre mount support bracket and U bracket. Operates from 10-32 Volts. Power consumption 6 watt. Supplied with 1.8 metre power supply cable. Brightness, colour, contrast, volume & sharp can be separately adjusted.

Suitable for up to 3 Waterproof Cameras: Touch button with fingertip operation. Automatic backlighting for buttons. Supplied with centre mount support bracket and U bracket. Operates from 10-32 Volts. Power consumption 5 watt. Supplied with 1.8 metre power supply cable. Brightness, colour, contrast, volume & sharp can be separately adjusted.

The standard unit comes complete with a 12" discharge auger, and the hydraulic raise and lower on the auger.  The bin has a cut of door at the base that is hydraulically operated from within the cabin of the tractor.  A simple direct drive to the base of the auger, connected to the tractor by a PTO, and a slip clutch.

Illustrated 18 Ton 22.5 M³ Chaser Bin with Roll Tarp and Hydraulic Folding Shute standard on all 18 Ton Chaser Bins (Now 22 Ton 27 M³). The unit is standard with a 15" discharge auger, with a capacity of up to 5 tonne per minute with an optional 18" discharge auger available. The standard drive is setup for a 540 rev drive tractor with an option of 1000 rev drive or hydraulic drive if sufficient oil supply. The cleaning of this unit is simple, just pull the floor bar out from the back and the bin will clean out completely.

Illustrated 25 Ton 30 M³ Chaser Bin with Roll Tarp and Hydraulic Folding Chute standard on all 25 Ton Chaser Bins Now 28 Ton 33 M³. The unit is standard with a 15" discharge auger, with a capacity of up to 5 tonne per minute with an optional 18" discharge auger available. The standard drive is setup for a 540 rev drive tractor with an option of 1000 rev drive or hydraulic drive if sufficient oil supply. The cleaning of this unit is simple, just pull the floor bar out from the back and the bin will clean out completely.