Zhangqiu Fada Pellet Machinery Co., Ltd. products

Working principle: The drum of the drum drying furnace is a slightly inclined and rotatable cylinder. Wet materials enter from the upper part of one end and dry materials are collected from the lower part of the other end. Hot air enters from the feed end or the discharge end and is discharged from the upper part of the other end. Performance characteristics: The water evaporation capacity of the drum dryer is generally 30-80kg/m3 h; it increases with the increase of hot air temperature and changes with the moisture properties of the material. The equipment runs smoothly and reliably, with no wearing parts, few faults and long service life, and is widely used in various drying industries.

Drum chipper is a special equipment for the production of wood chips. Widely used in particleboard, fiberboard and paper mills and other industrial production preparation section, as well as wood chip production plant. The small drum-type base-free chipper is also the best equipment for the preparation of raw materials in the factory laboratory. The cutting raw materials of drum chipper are mainly wood cutting residues (tree, branches, etc.) and wood raw material processing residues (board skin, slats, round wood core, waste veneer, etc.), and can also be used to cut non-wood raw materials (such as dried sugarcane, reed, bamboo, etc.).

Drum-type drier is tilted slightly and the cylindrical rotating body, the wet material enter into the upper, at the same time, the dry materials are collected on the other side of the lower part. Hot air from the feed end or discharge end access to the material and discharge from the other side of the upper part.

Drum chipper is special equipment for producing wood chips. It is widely used for preparation section of shaving boards, fibreboards, plate making, wood straw factory power generation, and other industrial production. The cutting raw materials of drum chipper are mainly undersized wood, wood logging residue (branches, twigs, and so on) and wood raw material processing residues (slabs, battens, log cores, waste veneers, and so on), and the drum chipper can be used for cutting non-wood raw materials, such as sugarcane, reed and moso bamboo.