Aluhall 5,4 H Tent Brochure

Veldeman Structure Solutions Industrieterrein Vostert 1220 3960 Bree (Belgium) Tel.: +32 (0)89 47 31 31 Fax: +32 (0)89 47 37 77 E-mail: info@veldemangroup.be Website: www.veldemangroup.be 5, 55 4m 7, 23 2m Al u 25 m pr of . 2 7 x 10 cm Al u 20 m pr of . 2 7 x 10 cm Al u 15 m pr of . 2 7 x 10 cm Al u 10 m pr of . 2 7 x 10 cm 8, 05 0m 8, 86 0m 9, 67 0m 5m 5m 5m 5m 5m 5m Construction It is a self-supporting anodised aluminium construction that rests on galvanised steel base-plates or ground beams. The standard anchoring is realised with stakes. All parts are connected with pins for quick and easy installation. The stability is ensured using wind bracing. The structure is subject to the most important international building standards (e.g. the British “Building Codes”, the Germany “Prüfbuch” standard, the French “Extrait du registre de sécurité”, etc.). Roof and gable fabrics Roof and gable fabrics are made from PVC-coated polyester fabric (white translucent, white non-translucent or colour). Roof and gable fabrics are slid into the keder tracks of the roof beams and stretched with tension tubes and ratchets or fabric tensioners. Flame retardant according to the French standard M2, German standard DIN 4102 B1 and British Standard BS 5438. The fabric is UV-stabilised and treated against deterioration due to rot and mildew. Sidewalls The sidewall fabrics are made from PVC coated polyester fabric (white translucent, white non-translucent or colour). Flame retardant according to the French standard M2, German standard DIN 4102 B1 and British Standard BS 5438. The fabric is UV-stabilised and treated against deterioration due to rot and mildew. One sidewall of 5 m is made up of two sections of 2.5 m connected with a zip. The sidewall slides into the leg with a keder in the keder tracks. The sidewall is attached to the connection bar or ground beam at the bottom with straps and at the top the side fabric is slid into the side purlin with keder sections. This prevents the fabric from flapping in strong winds. Cross section drawing Technical specifications Standard width 10 - 25 m Standard length Unlimited Side height 5,4 m Bay distance 5 m WIDTH LE N G T H Ground plan