Antelco USA Catalog Brochure

®www.antelco.comANTELCO ®P U T T I N G W A T E R W H E R E I T C O U N T S ®2012Irrigation EquipmentUSA CatalogThis brochure is produced on paper from sustainable forests and printed using environmentally friendly vegetable based inks by Graphic Print Group.®DRIPPERSSPRAYSFITTINGSACCESSORIESSPRINKLERSC o n t e n t sRotor Spray™ Mini Sprinklers 3.0Rotor Rain® Mini Sprinklers 3.2Rotor Max™ Midi Sprinklers 3.4GS1 Gear Drive Sprinkler 3.5Micro Fittings 5.0Xpando® Take-Off Fittings 5.1DB Fittings 5.2Snap-On & Compression Fittings 5.4Pressure Regulating Devices 6.0Valves 6.1 Filters 6.3 Rigid Risers 6.4 Stakes & Micro Pop-Ups 6.5Asta® Stake Assemblies 6.6Drip Mate® Professional Drip Kits 6.7Drip Mate® Drip & Spray Starter Kits 6.8Tubing 6.9 Punches 7.0Irrigation Equipment: Facts To Consider 7.1USA Conditions of Sale 7.2Shrubbler® 360° & 180° Adjustable Flow 1.0Shrubbler® 360° Pressure Compensating 1.1Mini Bubbler 360° Adjustable Flow 1.2 Pinch Drip™ Pressure Compensating 1.3DripPets® 1.4Asta® Drip Pressure Compensating 1.5Midi Drip™ Emitters 1.6 CETA® Pressure Compensating Drippers 1.7Agri Drip™ Emitters 1.8Spectrum™ 360° Adjustable Flow 2.0Vari-Jets™ 2.1CFd® Downspray 2.2Frame Jets™ 2.3Micro Spray Jets: Caps and Bases 2.5Micro Spray Jets: Assemblies 2.7Single Piece Jets 2.8Antelco is committed to product development and improvement so specifications may change without notice and without incurring liability. Revised product information is available on the website.© All photographs and drawings used in the Antelco catalog are the property of Antelco Pty Ltd and are protected by Copyright. Reproduction in whole or in part, in any form or medium, without written approval from Antelco Pty Ltd is prohibited. ™ ® Trademarks and Registered Trademarks, where indicated, are owned by Antelco Pty Ltd.TAPEREDMicro Mate™ Tapered Emitters 4.0Micro Mate™ Tapered Fittings 4.1Shrubbler® In-Line Spike 0.16”Shrubbler® 360° & 180° Adjustable Flow PatentedThe original patented Shrubbler® with flow adjustment. Flow and coverage can be altered by rotating the cap.Features• Finger-tip flow control with shut-off option.• Spike model to anchor Shrubbler® at the plant.• In-Line Spike model suits 0.16” ID connection tube.• Barb model for direct attachment to feeder and supply lines.• Threaded model for installation into Rigid Risers and Asta® Stakes.• 1/2” Threaded model for riser pipe installations.ApplicationsPots, tubs, landscaped gardens and nurseries. Ideal for hanging baskets. In-Line Spike model suitable for planter boxes.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.0Performance360° 180° BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Barb 0.16” 31245 100 50 20.6 Thread 10-32 UNF 31215 100 50 24.6 Thread 1/2” FNPT 31225 25 50 13.8 Spike 31295 25 40 14.4Shrubbler® 180° BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Barb 0.16” 31445 100 50 20.6 Thread 10-32 UNF 31415 100 50 24.6 Thread 1/2” FNPT 31425 25 50 13.8 Spike 31495 25 40 14.4 In-Line Spike 30995 25 40 14.3Shrubbler® 360°Number of clicksDiameter (ft)0 10 18 22• 20 psi1.03.02.012 14 16 20• 30 psi• 15 psiFlow Rate 360° & 180°Number of clicksDischarge (gph)100 2 10 14 20• 20 psi144128624 6 8 12 16 18 22• 30 psi• 15 psiDiameter of Throw 360°Number of clicksRadius (ft)1.50 10 18 22• 20 psi2.01.00.512 14 16 20• 30 psi• 15 psi8Radius of Throw 180° PRESSURE FLOW DIAMETER RADIUS (psi) (gph) (ft) (ft) fully open 15 8.7 1.2 1.2 (approx. 20 10.3 1.9 1.5 22 clicks) 30 13.0 3.0 2.0Shrubbler® Spike 0.16” with adapterShrubbler® Barb 0.16”Shrubbler® Thread 10-32 UNFShrubbler® Thread 1/2”* For product specifications see page 1.2Shrubbler® 360° Pressure CompensatingA Pressure Compensating, fixed diameter drip emitter. Gentle flow action with uniform coverage for all emitters on same supply tube.Features• Patented design.• Pressure Compensating maintains diameter of throw over a wide range of inlet pressures.• Take-apart for easy inspection and cleaning.• Colored cap for easy identification.• UV stabilized materials for long life.ApplicationsPots, planter boxes, balcony, patio and landscape applications.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.1 BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Barb 0.16” 31685 100 50 20.4 Spike 31695 25 50 15.9Shrubbler® 360° PC Fixed Flow NORMAL PRESSURE FLOW DIAMETER FLOW (psi) (gph) (in) 15 6.6 10.2 20 7.5 11.8 6 gph 30 8.8 14.0 35 9.3 14.6 40 9.7 15.0Performance360° DIMENSIONS ASSEMBLED BARB SPIKE HEIGHT 1.0” 5.3” WIDTH 0.8” 0.6” DIAMETER 0.6” 1.0” WEIGHT (approx) 0.06 oz 0.19 oz UV STABILIZED BASE polypropylene polypropylene MATERIAL CAP polypropylene polypropylene DIAPHRAGM silicone silicone BASE/CONNECTION TYPE: Inlet BARB 0.16” BARB 0.16”SpecificationsShrubbler® 360° PCSpike 0.16”Shrubbler® 360° PCBarb 0.16”Flow Rate 360°????????????????????7YLZZ\\\\YL??WZP?+PZJOHYNL??NWO?Mini Bubbler 360° Adjustable Flow Gentle umbrella pattern. Flow and coverage can be altered by rotating the cap.Features• Finger-tip flow control with shut-off option.• Spike model to anchor Mini Bubbler at the plant.• Barb model for direct attachment to feeder and supply lines.• Threaded model for installation into Rigid Risers and Asta® Stakes.• 1/2” Threaded model for riser pipe installations.ApplicationsStreet trees and shrubs. Flow rates allow for short watering times.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.2 BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Barb 0.16” 31745 100 50 19.6 Thread 10-32 UNF 31715 100 50 24.0 Thread 1/2” FNPT 31725 25 50 13.7 Spike 31795 25 40 14.7Mini Bubbler 360°Number of clicksDischarge (gph)30200 2 10 14 20• 20 psi401035252054 6 8 12 16 18 22• 30 psi• 15 psiNumber of clicksDiameter (ft)1.51.00 2 10 14 20• 20 psi2.00.54 6 8 12 16 18 22• 30 psi• 15 psiFlow RateDiameter of ThrowSpecifications: Shrubbler® and Mini Bubbler DIMENSIONS ASSEMBLED BARB THREAD TAPER THREAD 1/2” SPIKE HEIGHT 0.9” 0.9” 0.9” 1.3” 5.3” WIDTH 0.8” 0.8” 0.8” 1.0” 1.7” DEPTH 0.6” 0.6” 0.6” 1.0” 0.6” WEIGHT (approx) 0.06 oz 0.07 oz 0.07 oz 0.15 oz 0.19 oz UV STABILIZED BASE polypropylene acetal acetal polypropylene polypropylene MATERIAL CAP polypropylene polypropylene polypropylene polypropylene polypropylene BASE/CONNECTION BARB 0.16” 10-32 UNF TAPER # 6 THREAD BARB 0.16” TYPE: Inlet THREAD (Refer Page 4.0) 1/2” FNPT PRESSURE FLOW DIAMETER (psi) (gph) (ft) fully open 15 27.0 0.69 (approx. 20 30.1 1.05 22 clicks) 30 35.0 1.89Performance360°Mini BubblerThread 1/2”Mini BubblerBarb 0.16”Mini BubblerThread 10-32 UNFMini Bubbler Spike 0.16” with adapterPinch Drip™ Pressure CompensatingA PC dripper with a turbulent flow path, sealed to maintain pre-set discharge rates and uniformity. Ergonomically designed for easy finger/thumb installation.Features• Registered design.• Three color coded flow rates: 1/2 gph, 1 gph & 2 gph.• Turbulent flow path and self-flushing action with insect baffle to minimize blockages.• Inlet barb has built-in filter.• Outlet suitable for attaching 0.16” micro tube.• UV stabilized materials for long lifeApplicationsPots, patios and landscape applications.® Performance1/2 gph 1 gph 2 gphDISCHARGE (gph)PRESSURE(psi) 5 0.45 0.77 1.30 10 0.60 1.06 1.81 15 0.60 1.10 2.09 20 0.60 1.14 2.14 25 0.61 1.20 2.17 MINIMUM CROSS SECTION (inch) 0.027 x 0.024 0.031 x 0.031 0.047 x 0.035* Cv for all Pinch DripTM emitters conforms to ISO 9261A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.3 DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 1.0” CAP polypropylene Inlet: BARB 0.16” WIDTH 1.1” BASE polypropylene Outlet: SPOUT 0.16” DEPTH 0.6” DIAPHRAGM silicone rubber WEIGHT (approx) 1.2 ozSpecifications NOMINAL BASE PART PACK PACKS PER CARTON FLOW COLOR NUMBER QUANTITY CARTON (lbs) 1/2 gph Red 30705 100 50 13.4 1 gph Black 30715 100 50 13.4 2 gph Green 30725 100 50 13.4Pinch DripTM PCPinch DripTM PC 1/2 gphBarb 0.16”Pinch DripTM PC 1 gphBarb 0.16”Pinch DripTM PC 2 gphBarb 0.16”Discharge Rate: Pinch DripTM PC0.00.51.01.52.02.505040302010Pressure (psi)Discharge (gph) ????NWO????NWO??????NWOA Pressure Compensating dripper disguised as a fun and eye catching feature for your garden.Features• Registered design.• 1 gph Pressure Compensating.• Turbulent flow path and self-flushing action with insect baffle to minimize blockages.• Inlet barb has built-in filter.• Outlet suitable for attaching 0.16” micro tube.• UV stabilized materials for long life.• Retail packaging for promotional counter sales.ApplicationsPots, patios and landscape applications.DripPets®®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.4Specifications DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE FROG LADYBUG HEIGHT 1.0” 1.0” CAP polypropylene Inlet: BARB 0.16” DIAMETER 1.2” 1.1” BASE polypropylene Outlet: SPOUT 0.16” DEPTH 1.4” 1.5” DIAPHRAGM silicone rubber WEIGHT (approx) 0.13 oz 0.10 oz COVER - FROG nylon COVER - LADYBUG acetalDripPets® Frog 1 gph PCDripPets® Ladybug 1 gph PCDripPets® Frog Retail Box PRESSURE DISCHARGE (psi) (gph) 5 0.77 10 1.06 15 1.10 20 1.14 25 1.20Performance 1 gph TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DripPets® Frog 30815 100 18 18.6 DripPets® Ladybug 30845 100 18 17.0DripPets® 1 gph Pressure CompensatingDischarge Rate: DripPets®0.00.51.01.52.02.505040302010Pressure (psi)Discharge (gph)????NWOAsta® Drip Pressure CompensatingA PC spike dripper with turbulent flow path, sealed to maintain pre-set discharge rates and uniformity. A nursery and landscape spike dripper that delivers precise amounts of water direct to the plant root zone.Features• Registered design• Three color coded flow rates: 1/2 gph, 1 gph & 2 gph.• Turbulent flow path and self-flushing action with insect baffle to minimize blockages.• Inlet barb has built-in filter.• Outlet suitable for attaching 0.16” micro tube.• UV stabilized materials for long lifeApplicationsNurseries, shade houses, tree lots and landscape applications.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.5 DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 5.7” SPIKE polypropylene Inlet: BARB 0.16” WIDTH 1.3” BASE polypropylene Outlet: SPOUT 0.16” DEPTH 1.7” DIAPHRAGM silicone rubber WEIGHT (approx) 0.17 ozSpecifications NOMINAL BASE PART PACK PACKS PER CARTON FLOW COLOR NUMBER QUANTITY CARTON (lbs) 1/2 gph Red 30735 25 50 15.9 1 gph Black 30745 25 50 15.9 2 gph Green 30755 25 50 15.9Asta® Drip PCAsta® Drip PC 1/2 gphSpike 0.16”Asta® Drip PC 1 gphSpike 0.16”Asta® Drip PC 2 gphSpike 0.16”Discharge Rate: Asta® Drip PC* Cv for all Asta Drip® emitters conforms to ISO 9261 Performance1/2 gph 1 gph 2 gphDISCHARGE (gph)PRESSURE(psi) 5 0.45 0.79 1.27 10 0.61 1.06 1.77 15 0.62 1.11 2.08 20 0.61 1.14 2.13 25 0.61 1.18 2.14 MINIMUM CROSS SECTION (inch) 0.027 x 0.024 0.031 x 0.031 0.047 x 0.035?????????????????????????????7YLZZ\\\\YL??WZP?+PZJOHYNL??NWO? ????NWO????NWO??????NWO1 gph dripper with barb and spike options. For efficient delivery of water to individual plants in pots and gardens.Features• Take apart for easy inspection and cleaning.• Barb model for direct insertion into tubing.• Spike model to anchor Midi Drip™ at the plant.ApplicationsShrubs and flowers, fruit trees, vines and tomatoes in a wide range of situations from home gardens to large scale nurseries.Midi Drip™ Emitters®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.6 BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Barb 30145 100 50 11.6 Spike 30195 25 50 13.6Midi Drip™ Emitters 1 gph Nominal DischargePressure (psi)Discharge (gph)1.00 10 20 30 40• 1 gph2.0Discharge Rate DIMENSIONS ASSEMBLED BARB SPIKE UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 0.7” 4.9” BODY polypropylene LENGTH 1.4” 2.0” KEY polypropylene Inlet: BARB 0.16” WIDTH 0.35” 0.35” SPIKE polypropylene WEIGHT (approx) 0.053 oz 0.163 ozSpecifications PRESSURE DISCHARGE (psi) (gph) 5 0.62 10 0.88 15 1.07 20 1.24 25 1.39 MINIMUM CROSS SECTION (inch) 0.025 x 0.020Performance 1 gphMidi Drip™ Spike 0.16”Midi Drip™ Barb 0.16”* Cv for all Midi DripTM emitters conforms to ISO 9261CETA® Pressure Compensating DrippersA turbulent flow, Pressure Compensating dripper available in 3 flows.Features• Take-Apart for easy inspection and cleaning.• Self-flushing action with insect baffle to minimize blockages.• PC barbed dripper range: 1/2 gph, 1 gph & 2 gph with 0.16” spout.• Also available with 0.12” & 0.16” barb outlets.• Colored bases to identify flow rates.• 1 gph PC Spike and In-Line Spike models to anchor CETA® at the plant.ApplicationsPots, planter boxes, balcony patio and landscape applications.® DIMENSIONS CETA® PC CETA® PC With 0.12” CETA® PC Spike/In-Line or 0.16” Barb Outlet Spike HEIGHT 1.0” 1.4” 5.3” WIDTH 0.8” 0.8” 1.7”/1.4” DEPTH 0.6” 0.6” 0.6” WEIGHT (approx) 0.06 oz 0.07 oz 0.18 oz UV STABILIZED MATERIALS CONNECTION TYPE: Inlet BARB 0.16” BARB 0.16” BARB 0.16” Outlet SPOUT 0.16” BARB 0.12” or 0.16” SPOUT 0.16”Specifications BASE/SPIKECAPDIAPHRAGMADAPTERpolypropylenepolypropylenesiliconepolypropylenepolypropylenesiliconeacetalpolypropylenepolypropylenesiliconeA n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERSCETA® PC 1/2 gph Barb 0.16”CETA® PC 1 gphBarb 0.16”CETA® PC 2 gphBarb 0.16”CETA® PC 1/2 gph Barb 0.16” 0.12” or 0.16” OutletCETA® PC 1 gph Barb 0.16” 0.12” or 0.16” OutletCETA® PC 2 gph Barb 0.16” 0.12” or 0.16” OutletCETA® PC 1 gphSpike 0.16” CETA® PC 1 gphIn-Line Spike 0.16” BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Spike 30625 25 40 13.4 In-Line Spike 30655 25 40 14.4CETA® PC 1 gph Spike NOMINAL BASE PART PACK PACKS PER CARTON FLOW COLOR NUMBER QUANTITY CARTON (lbs) 1/2 gph Red 30425 100 50 15.6 1 gph Black 30445 100 50 15.6 2 gph Green 30485 100 50 15.6CETA® PC NOMINAL BASE PART PACK PACKS PER CARTON FLOW COLOR NUMBER QUANTITY CARTON (lbs) 1/2 gph Red 30515 100 50 24.3 1 gph Black 30525 100 50 24.3 2 gph Green 30535 100 50 24.3CETA® PC with 0.12” Barb Outlet NOMINAL BASE PART PACK PACKS PER CARTON FLOW COLOR NUMBER QUANTITY CARTON (lbs) 1/2 gph Red 30545 100 50 24.3 1 gph Black 30555 100 50 24.3 2 gph Green 30565 100 50 24.3CETA® PC with 0.16” Barb Outlet1.7 Performance1/2 gph 1 gph 2 gphDISCHARGE (gph)PRESSURE(psi) 5 0.41 0.76 1.47 10 0.51 0.92 1.80 15 0.54 1.00 2.08 20 0.57 1.07 2.08 25 0.59 1.12 2.11 * Cv for all CETA® PC emitters conforms to ISO 9261A turbulent flow path dripper in standard and Pressure Compensating models, sealed to maintain pre-set discharge rates and uniformity.Features• Standard range: 1/2 gph, 1 gph and 2 gph.• Pressure Compensating range: 1/2 gph, 1 gph & 2 gph.• Positive barb connection to suit 0.16” ID tube.• UV stabilized materials for long life.• Resistant to common agricultural chemicals and fertilizers.ApplicationsHorticultural tree and row crops, vineyards and landscape applications.Agri Drip™ Emitters®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mDRIPPERS1.8Agri Drip™ Standard Drip EmittersAgri Drip™ Pressure Compensating Drip EmittersSpecificationsPressure (psi)Discharge (gph)3.02.0• 0.5 gph0 10 20 30 40• 1 gph• 2 gph4.01.0Discharge Rate: Standard Drip Emitters NOMINAL PART PACK PACKS PER CARTON FLOW NUMBER QUANTITY CARTON (lbs) 1/2 gph 30325 100 50 14.8 1 gph 30345 100 50 14.8 2 gph 30365 100 50 14.8 NOMINAL PART PACK PACKS PER CARTON FLOW NUMBER QUANTITY CARTON (lbs) 1/2 gph 30225 100 50 14.1 1 gph 30245 100 50 14.1 2 gph 30285 100 50 14.11/2 gph 1 gph 2 gph Performance1/2 gph 1 gph 2 gphCOMPENSATING DISCHARGE (gph)STANDARDDISCHARGE (gph)PRESSURE(psi)PRESSURE(psi) 5 0.36 0.70 1.44 15 0.54 0.99 2.17 10 0.50 0.96 2.00 20 0.55 1.03 2.21 15 0.61 1.18 2.42 25 0.56 1.05 2.25 20 0.70 1.35 2.77 35 0.56 1.07 2.29 25 0.78 1.50 3.08 45 0.56 1.11 2.17 MINIMUM CROSS SECTION (inch) 0.035 x 0.028 0.050 x 0.032 0.073 x 0.043 0.027 x 0.025 0.03 x 0.03 0.027x0.039 DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 0.9” BASE polypropylene Inlet: BARB 0.16” DIAMETER 0.8” CAP polypropylene Outlet: PUSH FIT 0.16” WEIGHT (approx) 0.039 oz DISK silicone rubberAgri Drip™ Standard EmitterAgri Drip™ Pressure Compensating EmitterThis product has been independently tested by the Center for Irrigation Technology, California State University, Fresno.Discharge Rate: Pressure Compensating Drip Emitters* Cv for all Agri Drip® emitters conforms to ISO 9261?????????????????????????????7YLZZ\\\\YL??WZP?+PZJOHYNL??NWO? ????NWO????NWO??????NWO??????NWOAn adjustable flow, full circle vortex sprayer with fine water droplets. Flow and coverage can be altered by rotating the cap.Features• Finger-tip flow control with shut-off option.• Spike model to anchor Spectrum™ at the plant.• Barb model for direct attachment to feeder and supply lines.• Threaded model for installation into Rigid Risers and Asta® Stakes.• 1/2” Threaded model for riser pipe installations.ApplicationsPots, tubs, ground cover, landscaped gardens and nurseries. Waters large garden areas when used with Asta® Stakes and risers.Spectrum™ 360° Adjustable Flow®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.0Number of clicksDischarge (gph)200 2 10 14 20• 20 psi824161244 6 8 12 16 18 22• 30 psi• 15 psiFlow Rate DIMENSIONS ASSEMBLED BARB THREAD TAPER THREAD 1/2” SPIKE HEIGHT 1.0” 1.0” 1.0” 1.5” 5.3” WIDTH 0.8” 0.8” 0.8” 1.0” 1.7” DEPTH 0.6” 0.6” 0.6” 1.0” 0.6” WEIGHT (approx) 0.06 oz 0.07 oz 0.10 oz 0.17 oz 0.19 oz UV STABILIZED BASE polypropylene acetal acetal polypropylene polypropylene MATERIAL CAP polypropylene polypropylene polypropylene polypropylene polypropylene DEFLECTOR acetal acetal acetal acetal acetal BASE/CONNECTION BARB 0.16” 10-32 UNF TAPER # 6 THREAD BARB 0.16” TYPE: Inlet THREAD (Refer Page 4.0) 1/2” FNPT Specifications BASE PART PACK PACKS PER CARTON TYPE NUMBER QUANTITY CARTON (lbs) Barb 0.16” 32045 50 50 13.8 Thread 10-32 UNF 32015 50 50 15.7 Thread 1/2” FNPT 32025 25 50 15.6 Spike 32095 25 40 15.3Spectrum™ 360°Number of clicksDiameter (ft)100 2 10 14 20• 20 psi4128624 6 8 12 16 18 22• 30 psi• 15 psi14Diameter of Throw PRESSURE FLOW DIAMETER (psi) (gph) (ft) fully open 15 17.3 9.4 (approx. 20 19.8 11.2 22 clicks) 30 24.3 13.3Performance360°Spectrum™ Spike 0.16” with adapterSpectrum™ Barb 0.16” Spectrum™ Thread 10-32 UNFSpectrum™Thread 1/2”Vari-Jets™Valve adjusts flow and coverage.Features• Choice of spray patterns.• Threaded for installation on Rigid Risers.• UV stabilized materials for long life.ApplicationsHome and landscaped gardens. Vari-Mist™ is ideal for adjusting overhead watering of plants in hanging baskets.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.1 DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 2.0” CAP acetal Inlet: 10-32 UNF THREAD WIDTH 0.9” BASE acetal Inlet: TAPER # 6 WEIGHT (approx) 0.14 ozDimensions vary slightly depending on selected base and cap assemblySpecificationsVari-Jet™ SPRAY BASE CAP PART PACK PACKS PER CARTON PATTERN COLOR NUMBER QUANTITY CARTON (lbs) 360° x 18 hole Black 10-32 UNF Black 13145 50 50 16.2 180° fan Black 10-32 UNF Black 13125 50 50 16.2 90° fan Black 10-32 UNF Black 13115 50 50 16.0 Mist Black 10-32 UNF Black 13195 50 50 16.2 *Minimum Opening Size 0.02” 0.05” 0.06” 0.06” BASE & PRESSURE FLOW DIAMETER OF THROW RADIUS OF THROW ORIFICE SIZE (psi) (gph) (ft) (ft) 10 0 - 16.7 0 - 18.4 0 - 6.7 0 - 6.4 STANDARD 15 0 - 21.0 0 - 22.6 0 - 8.1 0 - 8.1 BASE 20 0 - 24.5 0 - 25.7 0 - 9.5 0 - 9.4 MAX 0.06” 25 0 - 28.0 0 - 26.7 0 - 10.1 0 - 9.8 30 0 - 31.0 0 - 26.3 0 - 10.6 0 - 10.3 10 0 - 4.0 0 - 3.0 MIST BASE 15 0 - 5.0 0 - 2.6 MAX 0.014” 20 0 - 5.9 0 - 2.9 25 0 - 6.6 0 - 2.8 30 0 - 7.4 0 - 2.6Performance360° x 18 Mist 180° 90°* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from spray to mist.Vari-Jet™ 180° fan 10-32 UNF ThreadVari-Jet™ 360° x 18 hole 10-32 UNF ThreadCFd® DownsprayWire Stake AssemblyCFd® Downspray PatentedThe C-Frame Downspray is a 360° spray jet that distributes water evenly across the wetted surface area. Stake assembly options provide savings in labor and installation time.Features• 45° downspray reduces the effect of wind.• Gentle spray minimizes damage to delicate plant foliage.• Galvanized wire stake assembly with 36” tubing.• Three color coded frames to identify flow rates.• “Quick” thread for easy insertion into tubing.• Shut-Off Clip to stop flow.• UV stabilized for long life.ApplicationsNurseries, tree lots, potted plants, home and landscaped gardens.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.2CFd® Downspray COLOR ORIFICE SIZE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) Black 0.032” 19005 100 50 18.1 Brown 0.035” 19025 100 50 18.1 Blue 0.039” 19015 100 50 18.1 CFd® Downspray Galvanized Wire Stake Assembly with Shut-Off Clip COLOR TUBE LENGTH PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) Black 36” 54305 25 12 20.1 Brown 36” 54325 25 12 20.1 Blue 36” 54315 25 12 20.1 DIMENSIONS ASSEMBLED CFd® DOWNSPRAY CFd® DOWNSPRAY WIRE STAKE ASSEMBLY HEIGHT 1.3“ 37.4” WIDTH 1.0” 1.0” DEPTH 0.3” 0.6” WEIGHT (approx) 0.05 oz 1.00 oz UV STABILIZED FRAME acetal acetal MATERIALS STAKE ADAPTER polypropylene OFF-TAKE TUBE PEVA BARB ADAPTER acetal STAKE galvanized steel BASE/CONNECTION TYPE: Inlet QUICK THREAD WITH BARB 0.16” SEALING BARB 0.16”Specifications COLOR AND PRESSURE FLOW DIAMETER ORIFICE SIZE (psi) (gph) (in) Black 10 4.8 24 0.032” 15 6.0 24 20 7.2 20 Brown 10 6.0 24 0.035” 15 7.5 20 20 8.6 20 Blue 10 7.0 24 0.039” 15 8.9 20 20 10.5 20Performance360°CFd®Downspray BlackCFd®Downspray BrownCFd®Downspray BlueFrame Jets™Low maintenance open spray jets which excel in performance and reliability. Deflector snaps on to frame to temporarily restrict spray diameter for young trees.Features• Open frame and spray plate.• No moving parts.• Wide range of spray patterns and trajectories.• Color coded nozzles for flow rate identification.• ‘Quick’ thread for easy insertion into tubing.ApplicationsSpecifically designed for orchards, vineyards and horticultural crops.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.3Frame Jet™ 210° x 8 PatternDeflector for Frame Jet™ Deflector attached to Frame Jet™ Butterfly Pattern PACKAGING PART MINIMUM STANDARD CARTON NUMBER ORDER CARTON (lbs) FRAME JETS™ Refer to page 2.4 1000 6000 26.9 DEFLECTOR 12998 1000 6000 27.0Frame Jets™ and DeflectorDue to the comprehensive range of Frame Jets™ all are made to order. Allow two weeks for assembly and dispatch. Urgent orders by arrangement.Optional 10-32 UNF thread available upon request.Smaller quantities may be available upon request.Specifications DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 1.26” FRAME acetal WIDTH 0.5” BASE acetal Inlet: “QUICK” THREAD 0.16” LENGTH 1.04” DEFLECTOR acetal Optional 10-32 UNF WEIGHT (approx) 0.065 ozPerformance and Order Codes A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.4 Base Pressure Flow Part Diameter Part Diameter Part Diameter Part Diameter Part Diameter Part Diameter Part Diameter Color (psi) (gph) Number (ft) Number (ft) Number (ft) Number (ft) Number (ft) Number (ft) Number (ft)HighLowLengthWidthTrajectory26° High 12.5° Low22°22°12.5°22°22°12.5°PatternA 360° x 12B ButterflyC 210° x 8E 360° x 22J 360° x 12V 300° x 10R RectangularPERFORMANCE 10 4.9 13 10 13 10 9 10 11 6 11 15 5.9 16 12 16 11 11 13 13 7 13 Black 20 6.9 12108 17 13 12208 17 12308 12 12508 12 12608 14 12708 15 8 12808 14 0.030” 25 7.6 17 14 18 13 13 15 15 9 15 30 8.3 18 15 18 13 13 16 16 9 15 10 5.4 13 11 15 15 10 12 12 7 13 15 6.7 16 13 18 18 11 14 14 8 15 Orange 20 7.7 12178 18 14 12278 19 12378 19 12578 12 12678 16 12778 16 9 12878 17 0.034” 25 8.5 19 16 21 20 13 17 17 10 19 30 9.3 20 17 23 22 14 18 18 11 20 10 6.1 14 11 14 13 10 12 14 7 13 15 7.5 17 14 16 15 12 15 15 9 15 Brown 20 8.7 12128 19 15 12228 17 12328 16 12528 14 12628 15 12728 17 10 12828 16 0.035” 25 9.7 20 16 19 17 15 17 18 11 17 30 10.5 21 17 21 18 15 19 19 11 17 10 7.9 16 13 17 15 11 13 15 8 14 15 9.9 18 16 20 17 13 16 17 10 16 Blue 20 11.3 12118 20 17 12218 23 12318 19 12518 15 12618 18 12718 17 11 12818 18 0.040” 25 12.6 22 19 25 20 17 19 19 12 20 30 13.8 24 21 26 21 18 20 20 13 21 10 10.0 18 15 18 24 12 15 15 9 17 15 12.3 21 17 23 26 15 20 17 11 20 Purple 20 14.3 12168 24 20 12268 25 12368 29 12568 17 12668 21 12768 21 13 12868 22 0.045” 25 15.9 26 22 28 32 18 23 23 14 23 30 17.3 28 23 29 34 19 25 25 15 24 10 11.4 20 16 21 20 14 18 16 10 19 15 14.2 24 20 25 25 17 21 19 12 23 Gray 20 16.2 12148 27 22 12248 27 12348 27 12548 18 12648 24 12748 21 13 12848 26 0.048” 25 18.2 29 24 30 29 20 26 23 15 29 30 19.7 31 26 31 31 21 27 24 16 30 10 13.0 20 16 20 19 14 16 17 11 17 15 16.0 24 20 25 21 17 20 19 13 21 Green 20 18.5 12138 27 22 12238 27 12338 22 12538 19 12638 22 12738 23 15 12838 24 0.050” 25 20.7 29 24 29 26 22 24 25 16 25 30 22.5 31 26 30 28 24 26 26 17 27 10 16.7 23 18 23 22 17 21 16 12 22 15 20.5 28 23 28 27 20 25 20 15 27 Olive 20 23.8 12188 32 26 12288 32 12388 30 12588 22 12688 28 12788 21 16 12888 30 0.059” 25 26.9 34 29 35 33 24 30 24 17 33 30 29.1 37 31 38 36 26 33 27 19 35 10 17.8 21 17 15 24 15 18 18 13 19 15 21.9 26 21 26 26 18 22 23 15 24 Red 20 25.2 12158 29 24 12258 28 12358 29 12558 21 12658 25 12758 25 18 12858 26 0.060” 25 28.4 31 27 31 32 23 28 26 19 27 30 30.7 34 29 34 34 25 30 26 19 27®Micro Spray Jets: Caps and BasesA large combination of flow rates and spray patterns is achievable when the range of caps and bases are assembled into two piece jets.Features• Caps available in eight spray patterns.• Eight color coded bases to identify flow rate.• Jet assemblies made to order.• Caps and bases can be ordered separately.• Available in 10-32 Hex and Winged “Quick” thread.ApplicationsAssemblies suit garden bed watering and landscaped areas.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.5Spray Caps SPRAY CAP PART PACK PACKS PER CARTON PATTERN COLOR NUMBER QUANTITY CARTON (lbs) 360° x 18 hole Black 10845 100 50 3.6 360° x 15 hole Black 10855 100 50 3.6 360° x 12 hole Black 10865 100 50 3.6 300° x 10 hole Black 10875 100 50 3.6 270° (3 x 90°) Black 10835 100 50 3.6 180° fan Black 10825 100 50 3.6 90° fan Black 10815 100 50 3.6 Strip (2 x 20°) Black 10885 100 50 3.6 Specifications DIMENSIONS CAP BASE WINGED BASE HEXAGON HEIGHT 0.35” 0.8” 0.8” WIDTH 0.32” across wings 0.5” across flats 0.5” WEIGHT (approx) 0.007 oz 0.02 oz 0.02 oz UV STABILIZED MATERIALS acetal acetal acetal BASE/CONNECTION TYPE: Inlet “QUICK” THREAD 0.16” 10-32 UNF THREADJet Bases BASE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE TYPE NUMBER QUANTITY CARTON (lbs) Black 0.03” Hexagon 10905 100 50 5.6 Brown 0.035” Hexagon 10925 100 50 5.6 Blue 0.04” Hexagon 10915 100 50 5.6 Green 0.05” Hexagon 10935 100 50 5.6 Red 0.06” Hexagon 10955 100 50 5.6 Orange 0.07” Hexagon 10975 100 50 5.6 Gray 0.08” Hexagon 10945 100 50 5.6 White 0.09” Hexagon 10985 100 50 5.6 Black 0.03” Winged 10705 100 50 6.5 Brown 0.035” Winged 10725 100 50 6.5 Blue 0.04” Winged 10715 100 50 6.5 Green 0.05” Winged 10735 100 50 6.5 Red 0.06” Winged 10755 100 50 6.5360° 18 hole360° 15 hole360° 12 hole300° 10 hole270° (3 x 90°)180° fan90° fanStrip (2 x 20°)Winged Jet Base with “Quick” Thread0.03”Hexagon Jet Base 10-32 UNF Thread0.07”Micro Spray Jets: Performance & Flow Rates®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.6* Minimum opening size for Base and Cap given to assist filtration selection. Ghosted figures indicate a change of performance from spray to mist.0.02”Performance360° X 180.02”*Minimum opening size360° X 15 360° X 120.03”300° X 100.03” 0.05” 0.05”270° X 3 2 X 20° 90°0.06”180°0.06” 0.05”MIST BASE PRESS. FLOW DIAMETER RADIUS DIAMETER COLOR & (psi) (gph) (ft) (ft) (ft) ORIFICE SIZE 10 4.7 10.2 9.2 9.5 5.9 10.9 10.4 4.4 4.4 Black 15 5.9 13.4 10.6 10.7 11.0 11.4 14.1 5.7 5.0 0.03” 20 6.9 14.7 11.5 12.5 14.8 9.2 16.8 6.6 5.4 25 7.8 15.6 12.4 13.7 17.5 9.2 18.9 7.2 5.6 30 8.6 16.4 14.0 15.5 20.0 8.8 19.9 7.7 6.7 10 6.1 10.8 10.2 9.7 9.7 8.5 11.5 4.7 4.8 Brown 15 7.5 13.3 12.6 11.3 13.4 11.2 15.5 6.1 5.3 0.035” 20 8.6 15.1 14.1 13.1 16.4 10.8 18.7 7.6 5.7 25 9.6 16.9 15.0 15.0 19.5 9.8 21.4 8.2 5.9 30 10.5 18.6 16.8 17.6 22.0 9.4 22.5 8.6 6.3 10 7.0 13.4 10.5 11.2 10.9 12.5 11.5 5.2 5.2 Blue 25 8.9 15.8 12.6 14.6 16.3 13.3 15.9 6.7 6.0 0.04” 20 10.5 18.2 14.8 16.4 21.4 10.6 17.7 7.7 6.4 25 12.0 19.6 17.5 17.6 25.3 11.1 19.0 8.5 6.6 30 13.3 20.4 20.9 23.0 28.6 10.6 19.0 9.2 7.0 10 11.5 17.4 15.8 13.0 12.8 11.0 15.5 5.8 5.7 Green 15 14.5 21.1 19.1 16.7 18.8 11.5 19.3 7.4 6.6 0.05” 20 17.2 22.5 20.0 19.1 22.5 12.0 22.4 8.4 7.2 25 19.5 23.3 22.1 20.3 25.4 12.1 25.4 9.1 7.8 30 21.5 23.8 26.1 23.5 26.4 12.3 28.3 9.6 8.4 10 16.3 18.4 15.9 15.6 16.4 11.1 17.8 6.4 6.7 Red 15 20.0 22.6 20.1 20.9 18.1 12.6 21.9 8.1 8.1 0.06” 20 23.5 25.7 23.6 26.0 24.8 14.0 27.5 9.4 9.5 25 26.0 26.7 27.2 30.5 32.4 15.0 31.8 9.8 10.1 30 29.0 26.3 29.4 33.5 34.5 15.8 35.8 10.8 10.6 10 20.0 18.5 18.6 20.1 18.3 12.8 19.6 6.6 6.8 Orange 15 25.0 22.5 22.9 25.4 24.7 13.9 26.9 8.0 8.0 0.07” 20 29.0 25.6 27.6 29.6 28.2 14.8 26.9 9.0 8.7 25 33.0 26.5 30.6 32.6 30.6 15.7 32.9 9.8 9.7 30 36.5 25.0 33.7 35.8 33.2 10.3 36.1 10.3 10.3 10 25.0 20.1 19.2 20.9 17.6 13.6 22.2 6.8 6.8 Gray 15 31.0 24.6 25.4 27.3 24.7 15.2 31.6 8.7 8.3 0.08” 20 35.5 25.9 29.9 31.6 28.9 16.4 37.8 9.9 9.7 25 40.0 26.0 33.8 36.4 31.4 17.3 42.3 10.5 10.5 30 44.0 25.0 37.0 39.9 35.3 16.7 43.5 10.9 10.9 10 35.5 19.4 19.4 23.7 16.1 14.8 23.2 7.7 7.8 White 15 44.0 23.3 26.7 30.8 23.1 18.0 30.0 10.0 9.3 0.09” 20 51.0 23.8 31.9 36.5 29.9 20.7 34.5 11.3 10.5 25 57.0 23.4 36.5 40.4 33.3 23.4 37.3 12.1 12.3 30 63.0 22.7 37.8 43.2 35.3 25.8 39.9 12.6 13.2 10 4.0 3.0 Yellow 15 4.8 2.6 0.014” 20 5.6 2.9 25 6.2 2.8 30 6.8 2.6+PZJOHYNL??NWO?7YLZZ\\YL??WZP?300 10 20 40• Yellow401030 801050 60 70• Black• Brown• Blue• Green• Red• Orange• Gray• WhiteFlow RateMicro Spray Jets: AssembliesTwo piece jets with precise watering patterns. Winged base for easy hand installation. Effective performance at low pressure (15 psi).Features• Nine optional spray patterns.• Color coded bases for flow identification.• Caps feature a snap ring which firmly engages the base.• UV stabilized materials for long life. ApplicationsLandscape areas, home gardens, nurseries and horticultural applications. Mist Jet ideal for greenhouse misting and hanging baskets. Strip Spray ideal for narrow garden beds. Use stakes and risers to elevate spray jets.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.7Micro Spray Jets Assembled TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) Assembled Two-Piece Spray Jet Cap & Base 1000 26 45.9Mist Jets Assembled TYPE BASE CAP PART PACK PACKS PER CARTON COLOR COLOR NUMBER QUANTITY CARTON (lbs) MIST JET – Hexagon Base Yellow Black 11995 100 50 8.9 MIST JET – Winged Base Yellow Black 14995 100 50 9.5 DIMENSIONS ASSEMBLED BASE WINGED BASE HEXAGON BASE HEXAGON HEIGHT 0.9” 0.8” 0.8” WIDTH 0.5” 0.3” 0.3” WEIGHT (approx) 0.025 oz 0.028 oz 0.028 oz UV STABILIZED BASE acetal acetal acetal MATERIALS CAP acetal acetal acetal BASE/CONNECTION TYPE: Inlet “QUICK” THREAD 0.16” TAPER # 6 (Refer Page 4.0) 10-32 UNF THREADDimensions vary slightly depending on selected base and cap assembly.SpecificationsFor assembled Two Piece Spray Jets select color base and cap spray pattern. Minimum order – 1,000 Assemblies. Allow two weeks for assembly and dispatch. Urgent Orders by arrangement.360° x 18 hole 180° fan90° fan Strip Spray (2 x 20°)360° Mist Jet 360° x 18 holeEconomical fan spray jet for effective watering.Features• Winged base with ‘Quick’ thread for rapid and easy installation.• No tools required.• Choice of three spray patterns – 360°, 180°, 90°.• Four color coded flow rates.ApplicationsHome and landscaped gardens and horticultural applications.Single Piece Jets®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRAYS2.8Discharge (gph)Pressure (psi)0 10 202015 351525 30• Blue• Green• Red• BlackFlow Rate SPRAY COLOR PART PACK PACKS PER CARTON PATTERN NUMBER QUANTITY CARTON (lbs) 360° Blue 15445 100 50 7.4 180° Blue 15425 100 50 7.4 90° Blue 15415 100 50 7.4 360° Green 15545 100 50 7.4 180° Green 15525 100 50 7.4 90° Green 15515 100 50 7.4 360° Black 15645 100 50 7.4 180° Black 15625 100 50 7.4 90° Black 15615 100 50 7.4 360° Red 15745 100 50 7.4 180° Red 15725 100 50 7.4 90° Red 15715 100 50 7.4Single Piece Jet COLOR AND PRESSURE FLOW DIAMETER RADIUS ORIFICE SIZE (psi) (gph) (ft) (ft) Blue 10 7.5 5.7 2.8 4.0 0.04” 15 9.5 6.6 3.3 4.6 20 11.0 7.5 3.8 5.3 Green 10 15.0 7.0 3.6 4.6 0.06” 15 18.8 7.9 4.1 5.3 20 21.8 8.9 4.7 6.0 Black 10 19.4 8.4 4.3 5.6 0.067” 15 24.2 9.3 5.0 6.3 20 28.2 10.2 5.6 7.0 Red 10 21.7 9.0 5.0 6.3 0.075” 15 27.4 9.8 5.6 6.9 20 31.4 10.8 6.3 7.6Performance360° 180° 90°Specifications DIMENSIONS UV STABILIZED MATERIALS BASE/CONNECTION TYPE HEIGHT 0.87” WIDTH across wings 0.5” acetal Inlet: “QUICK” THREAD 0.16” WEIGHT (approx) 0.021 ozSingle Piece Jets 360°Single Piece Jets 180°Single Piece Jets 90°A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mRotor Spray™ Mini SprinklersDurable and reliable with excellent distribution uniformity. Vari-Rotor Spray™ can be adjusted to alter flow and coverage.Features• ‘C’ Frame design for strength and high distribution uniformity.• Full flow flipper suspended between two bearings for reliable performance.• Inverted model incorporates special khaki colored flipper with dust cover to protect bearing.• Six color coded nozzles to identify flow rates.• 10-32 thread for installing into Rigid Risers, tubing & 1/2” threaded adapters.• UV stabilized materials for long life.ApplicationsLandscape areas, home gardens, nurseries and horticultural applications. Inverted Rotor Spray™ ideal for over-head greenhouse and nursery watering.®SPRINKLERS3.0+PZJOHYNL??NWO?7YLZZ\\YL??WZP?0 10 253020 502035 40• Brown• Green• Red• Gray5 15 30 45102515• Blue• OrangeFlow Rate BASE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE BASE TYPE NUMBER QUANTITY CARTON (lbs) Brown 0.035” 10-32 UNF 20025 50 50 12.7 Blue 0.04” 10-32 UNF 20015 50 50 12.7 Green 0.05” 10-32 UNF 20035 50 50 12.7 Red 0.06” 10-32 UNF 20055 50 50 12.7 Orange 0.07” 10-32 UNF 20075 50 50 12.7 Gray 0.08” 10-32 UNF 20045 50 50 12.7Rotor Spray™ BASE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE BASE TYPE NUMBER QUANTITY CARTON (lbs) Brown 0.035” 10-32 UNF 20125 50 50 12.7 Blue 0.04” 10-32 UNF 20115 50 50 12.7 Green 0.05” 10-32 UNF 20135 50 50 12.7 Red 0.06” 10-32 UNF 20155 50 50 12.7 Orange 0.07” 10-32 UNF 20175 50 50 12.7 Gray 0.08” 10-32 UNF 20145 50 50 12.7Inverted Rotor Spray™ BASE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE BASE TYPE NUMBER QUANTITY CARTON (lbs) Black 0.06” Max 10-32 UNF 20205 25 50 12.2Vari-Rotor Spray™This product has been independently tested at 15 psi by the center for Irrigation Technology, California State University, Fresno.Rotor Spray™ 10-32 UNF ThreadInverted Rotor Spray™ 10-32 UNF ThreadVari-Rotor Spray™ 10-32 UNF ThreadPerformance and Specifications®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRINKLERS3.1 DIMENSIONS ROTOR SPRAY™ ROTOR SPRAY™ VARI-ROTOR VARI-ROTOR ASSEMBLED and INVERTED and INVERTED SPRAY™ SPRAY™ ROTOR SPRAY™ ROTOR SPRAY™ HEIGHT 1.4” 1.4” 1.8” 1.8” WIDTH 1.1” 1.1” 1.1” 1.1” WEIGHT (approx) 0.07 oz 0.08 oz 0.12 oz 0.13 oz UV STABILIZED FRAME acetal acetal acetal acetal MATERIALS BASE acetal acetal acetal acetal FLIPPER nylon nylon nylon nylon KNOB - - HDPE HDPE BASE/CONNECTION 10-32 UNF TAPER # 6 10-32 UNF TAPER # 6 TYPE: Inlet THREAD 0.16” (Refer Page 4.0) THREAD 0.16” (Refer Page 4.0)Specifications BASE PRESS. FLOW DIAMETER STREAM DIAMETER STREAM DIAMETER DIAMETER COLOR & (psi) (gph) (ft) HEIGHT (ft) HEIGHT (ft) (ft) ORIFICE SIZE (inch) (inch) Brown 15 8.1 15 10 13.2 17.9 0.035” 20 9.4 17 11 13.8 19.4 25 10.5 17 13 13.8 20.3 Blue 15 9.8 17 11 13.9 18.5 0.04” 20 11.7 17 12 14.8 19.4 25 13.0 17 13 15.7 20.3 Green 15 16.8 19 14 13.9 19.1 0.05” 20 19.5 21 16 14.8 20.0 25 22.0 21 21 15.7 20.9 30 24.0 23 24 16.6 21.8 Red 15 22.5 23 21 14.5 20.4 0.06” 20 26.5 23 23 15.4 20.8 25 30.0 27 27 16.0 22.2 30 33.0 27 28 16.5 24.0 Orange 15 27.0 25 16 15.1 21.2 0.07” 20 31.5 27 19 15.6 23.0 25 35.5 29 21 16.3 23.9 30 39.0 29 24 17.2 24.4 Gray 15 32.5 25 18 15.1 21.2 0.08” 20 39.0 27 24 15.6 23.0 25 43.5 29 27 16.3 23.9 30 48.0 31 28 17.2 24.4 Black 15 0 - 22.0 0 - 23 0 - 21 max 20 0 - 26.0 0 - 23 0 - 23 0.06” 25 0 - 30.0 0 - 27 0 - 27 30 0 - 33.0 0 - 27 0 - 28PerformanceINVERTED ROTOR SPRAY™Tested 0.65 ft above groundTested 2.6 ft above groundTested 6.6 ft above groundTested 0.65 ft above groundVARI-ROTOR SPRAY™ROTOR SPRAY™Rotor Spray™ 10-32 UNF ThreadRotor Rain® Mini SprinklersLow trajectory, large droplet mini sprinkler.Features• ‘C’ Frame design for strength and high distribution uniformity.• Full flow flipper suspended between two bearings for reliable performance.• Eight color coded nozzles to identify flow rates.• Rotor can be replaced with break-off spray deflector for close-in watering of immature trees.ApplicationsVines, bananas and tree crops such as citrus and apples.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRINKLERS3.2Rotor Rain® 3/8” ThreadRotor Rain® 1/2” ThreadDischarge (gph)Pressure (psi)302010• Green• Blue• Gray• Yellow• Olive• Red• Orange• Purple0 20 40 60 80 100 120Flow Rate NOZZLE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE NUMBER QUANTITY CARTON (lbs) Green 0.055” 20535 100 10 25.2 Blue 0.07” 20515 100 10 25.2 Gray 0.075” 20545 100 10 25.2 Yellow 0.08” 20595 100 10 25.2 Olive 0.085” 20585 100 10 25.2 Red 0.095” 20555 100 10 25.2 Orange 0.10” 20575 100 10 25.2 Purple 0.11” 20565 100 10 25.2Rotor Rain® 1/2” MNPT NOZZLE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE NUMBER QUANTITY CARTON (lbs) Green 0.055” 20435 100 10 18.9 Blue 0.07” 20415 100 10 18.9 Olive 0.085” 20485 100 10 18.9 Red 0.095” 20455 100 10 18.9 Orange 0.10” 20475 100 10 18.9 Purple 0.11” 20465 100 10 18.9Rotor Rain® 3/8” MNPTThis product has been independently tested by the Center for Irrigation Technology, California State University, Fresno.Performance and Specifications®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRINKLERS3.3 DIMENSIONS Rotor Rain® Rotor Rain® UV STABILIZED MATERIAL BASE/CONNECTION TYPE ASSEMBLED 1/2” 3/8” WIDTH 1.8” 1.8” FLIPPER nylon Inlet: THREAD 1/2” MNPT HEIGHT 1.9” 1.9” FRAME acetal Inlet: THREAD 3/8” MNPT WEIGHT (approx) 0.37 oz 0.28 oz NOZZLE acetalSpecificationsPerformanceTested 8” above ground NOZZLE COLOR PRESSURE FLOW DIAMETER STREAM DEFLECTOR AND ORIFICE (psi) (gph) (ft) HEIGHT DIAMETER SIZE (ft) (ft) 15 20.0 26.0 1.8 Green 20 23.5 30.0 1.8 9.2 0.055” 25 26.5 30.0 1.8 30 29.2 30.0 2.1 15 26.5 30.0 2.2 Blue 20 31.0 34.0 2.4 9.2 0.07” 25 35.0 34.0 2.5 30 38.5 34.0 2.6 15 32.5 34.0 2.4 Gray 20 38.5 34.0 2.6 9.2 0.075” 25 44.0 34.0 2.7 30 49.0 34.0 2.8 15 40.0 30.0 2.1 Yellow 20 47.0 34.0 2.5 9.8 0.08” 25 53.0 38.0 2.8 30 58.5 38.0 3.1 15 44.0 34.0 2.3 Olive 20 51.0 34.0 2.6 9.8 0.085” 25 58.0 38.0 2.8 30 63.5 38.0 2.9 15 52.5 34.0 2.2 Red 20 61.0 38.0 2.7 10.5 0.095” 25 69.0 42.0 3.1 30 76.0 42.0 3.4 15 63.5 38.0 2.2 Orange 20 75.0 38.0 2.5 10.5 0.10” 25 85.0 38.0 2.8 30 94.5 40.0 3.0 15 70.5 38.0 2.6 Purple 20 83.0 42.0 2.9 13.1 0.11” 25 94.5 42.0 3.2 30 105.0 42.0 3.5Rotor Rain® 3/8” ThreadRotor Rain® 1/2” ThreadRotor Max™ Midi SprinklersRobust and reliable “spinner” sprinkler for use above and below plant foliage and with two trajectory options. Excellent sprinkler distribution patterns and performance. Features• Dual outlet spinner enhances performance.• Standard model has a 25° trajectory, black colored spinner.• Inverted model has a 0° flat trajectory, khaki colored spinner.• Suitable for recycled water applications subject to adequate filtration.• Easily taken apart for servicing.• UV stabilized materials for long life.ApplicationsGreenhouses, vegetable row crops and under tree watering. Inverted Rotor Max™ is ideal for over-head watering in glasshouse, nursery and shade house applications. The 0° trajectory sprinkler is also suited to standard upright operation, excellent for under foliage or wind affected locations.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRINKLERS3.4 NOZZLE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE NUMBER QUANTITY CARTON (lbs) Red 0.11” 21055 20 10 14.1 Black 0.13” 21005 20 10 14.1 Purple 0.15” 21065 20 10 14.1Rotor Max™ 1/2” NOZZLE PART PACK PACKS PER CARTON COLOR ORIFICE SIZE NUMBER QUANTITY CARTON (lbs) Red 0.11” 21555 20 10 14.1 Black 0.13” 21505 20 10 14.1 Purple 0.15” 21565 20 10 14.1Inverted Rotor Max™ 1/2” DIMENSIONS ASSEMBLED UV STABILIZED MATERIAL BASE/CONNECTION TYPE HEIGHT 3.8” FRAME polypropylene Inlet: THREAD 1/2” BSPM WIDTH 3.5” SPINNER acetal WEIGHT (approx) 0.95 oz NOZZLE acetalSpecifications NOZZLE PRESSURE FLOW DIAMETER STREAM HEIGHT COLOR (psi) (gpm) (ft) (ft) 15 1.3 36.0 3.0 Red 20 1.5 39.0 3.5 0.11” 30 1.8 43.0 4.0 40 2.1 43.0 4.5 15 1.7 36.0 3.0 Black 20 2.0 39.0 3.5 0.13” 30 2.4 43.0 4.0 40 2.8 45.0 4.2 15 2.4 40.0 2.3 Purple 20 2.8 42.0 2.7 0.15” 30 3.7 46.0 3.4 40 4.2 45.0 3.9PerformanceInverted Rotor Max™ tested 6.6 ft above groundRotor Max™ tested 0.65 ft above ground* Stream height is applicable only to the Rotor Max™This product has been independently tested by the Australian Irrigation Technology Centre, report No A95033.Rotor Max™ 1/2” ThreadInverted Rotor Max™ 1/2” ThreadFlow Rate???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???? ???????????7YLZZ\\YL??WZP?+PZJOHYNL??NWT???9LK??)SHJR??7\\YWSLGS1 Gear Drive Sprinkler Registered DesignThe GS1 is a fully adjustable lawn and garden sprinkler. Features• Full or part circle adjustable spray pattern 15° to 360°.• Radius adjustable from 26’ to 38’.• Blue watering arc indicator.• Built-in filter protects working parts and nozzle.• Slides easily to relocate.• Whisper quiet operation.• Snap-On base connection.• Supplied in bar-coded retail carton.ApplicationsHome and landscaped gardens, and medium to large lawns.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mSPRINKLERS3.5 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) GS1 GEAR DRIVE SPRINKLER 17055 5 1 9.0GS1 Gear Drive Sprinkler DIMENSIONS ASSEMBLED BASE/CONNECTION TYPE LENGTH 10.6” Inlet: SNAP-ON HEIGHT 4.1” WIDTH 9.4” WEIGHT (approx) 16.8 ozSpecificationsPerformance PRESSURE FLOW RADIUS STREAM HEIGHT (psi) (gpm) (ft) (ft) 15 2.3 26 4 20 2.6 28 5.2 30 3.3 31 6.3 40 3.8 34 6.9 50 4.2 36 7.2 60 4.6 38 7.6GS1 Gear Drive SprinklerRadius of Throw????????????? ??? ??? ??? ??? ??7YLZZ\\\\YL??WZP?9HKP\\Z?VM?[OYV^??M[?Flow Rate??????? ??? ??? ??? ??? ??? ??? ??? ??? ??? ???7YLZZ\\\\YL??WZP?+PZJOHYNL??NWT?Micro Mate™ Tapered EmittersTapered “push-in” base for easy installation and maintenance. Compatible with the range of Antelco tapered fittings. Effective performance at low pressure (15 psi). Features• Press fit taper connection for fast, easy installation.• Vari-Jet™ and Vari-Rotor Spray™ can be adjusted to change flows and coverage.• Asta® Micro Mate™ Stake assemblies for fast and efficient installation.• Suitable for Antelco’s range of tapered fittings.• UV stabilized materials for long life.ApplicationsCommercial, horticultural, landscaped gardens, nursery, home gardens and greenhouse low pressure (15 psi) irrigation systems. ®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mTAPERED4.0 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SHRUBBLER® 360° 31435 100 50 25.6 SHRUBBLER® 180° 31235 100 50 25.6 MINI BUBBLER 360° 31735 100 50 25.6Micro Mate™ Drippers Taper #6 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) JET Base Blue - 0.04” 10615 100 50 5.6 JET Base Green - 0.05” 10635 100 50 5.6Micro Mate™ Jet Bases Taper #6 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SPECTRUM™ 360° Taper # 6 32035 50 50 16.0 VARI-JET™ 360° x 18 Black Cap/Black Base 13175 50 50 16.9 VARI-JET™ 180° Black Cap/Black Base 13165 50 50 16.9 VARI-JET™ 90° Black Cap/Black Base 13155 50 50 16.9Micro Mate™ Sprays Taper #6 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ROTOR SPRAY™ 0.04” Blue Base 20715 50 50 13.6 ROTOR SPRAY™ 0.05” Green Base 20735 50 50 13.6 INVERTED ROTOR SPRAY™ 0.04” Blue Base 20815 50 50 13.6 INVERTED ROTOR SPRAY™ 0.05” Green Base 20835 50 50 13.6 VARI-ROTOR SPRAY™ 0.06” Black Base 20215 25 50 12.0Micro Mate™ Sprinklers Taper #6 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® MICRO MATETM STAKE ASSEMBLY with 24” tubing 55405 25 8 28.1Asta® Micro Mate™ Stake Assemblies Taper #6Rotor Spray™ Taper # 6Vari-Rotor Spray™ Taper # 6Spectrum™ Taper # 6Mini Bubbler Taper # 6Shrubbler® Taper # 6Asta® Micro Mate™ Stake Assembly (no emitter)Micro Mate™ Tapered FittingsMicro Mate™ tapered fittings for easy installation and servicing. Offer a simple way to alter the system to meet changing plant requirements.Features• Press fit taper connection for fast, easy installation.• Suitable for Antelco’s range of tapered emitters.• UV stabilized materials for long life.ApplicationsCommercial, horticultural, landscaped gardens, nursery, home gardens and greenhouse low pressure (15 psi) irrigation systems. ®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mTAPERED4.1 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) JOINER 0.18” barb (taper series) 40175 100 50 5.7 JOINER Taper # 6 (M) 40185 100 50 7.0 TEE Taper # 6 (F) 40365 50 50 12.9 ELBOW Taper # 6 (F) x Taper # 6 (M) 40265 50 50 7.9 PLUG Taper # 6 (M) 42335 100 50 5.8 ADAPTER 1/2” NPTF Thread x Taper # 6 (F) 41045 25 50 17.4 ADAPTER 0.18” barb x Taper # 6 (M) 40975 100 50 6.3 ADAPTER 0.18” barb x Taper # 6 (F) 40985 100 50 12.9 STAKE ADAPTER Taper # 6 (F) x Horizontal Entry 41405 50 50 14.6 STAKE ADAPTER Taper # 6 (F) x Vertical Entry 41415 50 50 14.8 ASTA® MICRO MATE™ STAKE 43625 25 30 27.2Micro Mate™ FittingsJoiner BarbStake Adapter™ Horizontal EntryStake Adapter™ Vertical EntryTee Taper (F)Joiner TaperElbow Taper (F) x Taper (M)Plug TaperAdapter 1/2” NPTF Thread x Taper (F)Adapter Barb x Taper (M)Adapter Barb x Taper (F)Asta®Micro Mate™ StakeMicro FittingsEssential components in low pressure micro irrigation systems. Used in conjunction with standard low pressure tubing. Antelco fittings are practical and durable. Features• Micro fittings with single barb or ‘Quick’ thread connection.• Adapters 1/2” MNPT and FNPT suit 10-32 or ‘Quick’ thread emitters.• UV stabilized materials for long life.ApplicationsHome gardens, landscaping, glasshouses and hanging baskets.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mFITTINGS5.0 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) GOOF PLUGS (rack of 10) 42325 10 50 3.6 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SADDLE CLIP w/nail TBA TBA TBA TBA SADDLE CLAMP 1/4” 45395 100 TBA TBAGoof PlugsSaddle Clips & Saddle Clamps TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) RATCHET CLAMP # 15 (tube OD .590 – .630) 44305 100 50 27.3 RATCHET CLAMP # 17 (tube OD .630 – .709) 44345 100 45 24.8 RATCHET CLAMP # 18 (tube OD .670 – .750) 44335 100 40 22.2 RATCHET CLAMP # 20 (tube OD .749 – .827) 44295 100 40 24.5 RATCHET CLAMP # 22 (tube OD .827 – .906) 44315 100 35 23.4 RATCHET CLAMP # 23 (tube OD .860 – .945) 44285 100 32 23.1 RATCHET CLAMP # 28 (tube OD 1.06 – 1.18) 44325 100 16 22.2Ratchet Clamps TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ADAPTER 0.16” (F) x 1/2” FNPT 41015 25 50 10.9 ADAPTER 0.16” (F) x 1/2” MNPT 41075 25 50 10.5 ADAPTER 10-32 UNF thread x thread 40915 100 50 5.5 1/2” RISER ADAPTER with 1/4” barb 51455 25 30 15.8 ADAPTER 0.16” “Quick” thread x thread 40925 100 50 6.4 ADAPTER 0.16” barb x 10-32 UNF thread 40945 100 50 6.8 ADAPTER 0.18” barb x 10-32 UNF thread 40995 100 50 7.0 JOINER 0.16” barb 40145 100 50 7.0 JOINER 0.18” barb 40195 100 50 8.0 JOINER 0.16” barb x barb self-piercing 40935 100 50 6.8Adapters and Joiners TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ELBOW 0.16” barb 40245 50 50 3.3 ELBOW 0.18” barb 40295 50 50 4.1 TEE 0.16” barb 40345 50 50 4.3 TEE 0.18” barb 40395 50 50 4.3 CROSS 0.16” barb 40445 50 50 5.2 CROSS 0.18” barb 40495 50 50 6.2Elbows, Tees & CrossesRatchet ClampAdapter 0.16” (F) x 1/2” FNPTAdapter “Quick” threadAdapter barb x 10-32 UNF threadElbowCrossTeeJoiner Joiner barb x barb self-piercingGoof Plugs (rack of 10)1/2” Riser Adapter with 1/4” barbAdapter 0.16” (F) x 1/2” MNPTSaddle ClipSaddle ClampAntelco Xpando® Take-Off Fittings are an improved method of connecting low pressure irrigation tubes and driplines to polyethylene tubes and PVC mainlines. Features• Easy to install, reducing both time and cost of installation. • Innovative Xpando® (Registered Design) Take-Off Adapter with collapsible barb prevents pull-out and reduces grommet damage during the installation process.• Capo® Top Hat Grommet with internal step combines with Xpando® interference barb to hold off-take firmly in place.• UV stabilized materials for long life.ApplicationsAgricultural, horticultural, vineyard and landscape applications.Xpando® Take-Off Fittings®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mFITTINGS5.1Capo® Rubber GrommetCapo® Rubber Grommet 10 mm (for 1” Schedule 40 PVC Pipe)Drill Bit for installation of Xpando® 10 mm Fittings(for 1” Schedule 40 PVC Pipe)Xpando® Take-Off AdapterXpando® Take-Off Adapter 10 mm(for 1” Schedule 40 PVC Pipe) TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) XPANDO® 13 mm inlet x 13 mm take-off 45605 25 40 12.9 XPANDO® 13 mm inlet x 14 mm take-off 45595 25 40 13.5 XPANDO® 13 mm inlet x 15 mm take-off 45615 25 40 15.5 XPANDO® 16 mm inlet x 16 mm take-off 45635 25 40 20.9 XPANDO® 16 mm inlet x 18 mm take-off 45585 25 32 18.0 XPANDO® 19 mm inlet x 21 mm take-off 45675 25 25 18.7 XPANDO® 19 mm inlet x 25 mm take-off 45685 25 18 19.9Xpando® Take-Off Adapters TYPE GROMMET DRILL BIT MINIMUM BARB OUTLET SIZE SIZE PVC SIZE SIZE XPANDO® 10 mm inlet x 14 mm take-off 10 mm P/N 51838 1” 14 mm XPANDO® 10 mm inlet x 15 mm take-off 10 mm P/N 51838 1” 15 mm XPANDO® 13 mm inlet x 13 mm take-off 13 mm 5/8 1 1/2” 13 mm XPANDO® 13 mm inlet x 14 mm take-off 13 mm 5/8 1 1/2” 14 mm XPANDO® 13 mm inlet x 15 mm take-off 13 mm 5/8 1 1/2” 15 mm XPANDO® 16 mm inlet x 16 mm take-off 16 mm 3/4 2” 16 mm XPANDO® 16 mm inlet x 18 mm take-off 16 mm 3/4 2” 18 mm XPANDO® 19 mm inlet x 21 mm take-off 19 mm 7/8 2” 21 mm XPANDO® 19 mm inlet x 25 mm take-off 19 mm 7/8 2” 25 mmInstallation Guide: Xpando® Take-Off Fittings TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) CAPO® RUBBER GROMMET 13 mm 45735 25 50 10.6 CAPO® RUBBER GROMMET 16 mm 45745 25 50 14.1 CAPO® RUBBER GROMMET 19 mm 45755 25 40 14.2Capo® Rubber Grommets TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) XPANDO® 10 mm inlet x 14 mm take-off 45875 25 50 13.8 XPANDO® 10 mm inlet x 15 mm take-off 45885 25 50 14.5 CAPO® RUBBER GROMMET 10 mm 45725 25 50 9.5 DRILL BIT FOR XPANDO® 10 mm Fittings 51838 1 1 0.1Xpando® Take-Off Fittings for 1” Schedule 40 PVC PipePressure Loss: Xpando® Take-Off Adapters40 5 10 15 20 25 30602Xpando® 13mm x 13mm,13mm x 14mm & 13mm x 15mmXpando® 16mm x 16mm & 16mm x 18 mmXpando® 19mm x 19mm,19mm x 21mm & 19mm x 25mm* Sizing guide available at www.antelco.com-SV^?9H[L?;OYV\\\\NO?-P[[PUN??NWT?7YLZZ\\YL?3VZZ??WZP? Xpando® 10mm x 14mm & 10mm x 15mm TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB COUPLING 13 mm (tube ID .520) 47005 25 50 13.8 DB COUPLING 14 mm (tube ID .530) 47015 25 40 12.8 DB COUPLING 15 mm (tube ID .570) 46975 25 50 18.0 DB COUPLING 16 mm (tube ID .600) 47025 25 50 18.8 DB COUPLING 18 mm (tube ID .660) 47035 25 40 17.7 DB COUPLING 21 mm (tube ID .805) 47045 25 30 16.8 DB COUPLING 25 mm (tube ID 1.050) 46995 25 20 15.8DB Coupling TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB REDUCING COUPLING 16 mm x 14 mm 47075 25 50 18.1 DB REDUCING COUPLING 18 mm x 14 mm 47085 25 50 20.1 DB REDUCING COUPLING 25 mm x 13 mm 47065 25 32 19.1 DB REDUCING COUPLING 25 mm x 14 mm 47105 25 32 20.7 DB REDUCING COUPLING 25 mm x 15 mm 47135 25 28 17.5 DB REDUCING COUPLING 25 mm x 16 mm 47145 25 28 17.8 DB REDUCING COUPLING 25 mm x 18 mm 47175 25 26 17.2 DB REDUCING COUPLING 25 mm x 21 mm 46965 25 24 17.0DB Reducing Coupling TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB ELBOW 13 mm (tube ID .520) 47205 25 50 16.1 DB ELBOW 14 mm (tube ID .530) 47215 25 50 19.6 DB ELBOW 15 mm (tube ID .570) 47375 25 50 21.7 DB ELBOW 16 mm (tube ID .600) 47225 25 40 18.5 DB ELBOW 18 mm (tube ID .660) 47235 25 40 21.5 DB ELBOW 21 mm (tube ID .805) 47245 25 20 14.6 DB ELBOW 25 mm (tube ID 1.050) 47255 25 16 16.3DB Elbows TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB REDUCING ELBOW 16 mm x 14 mm 47275 25 50 21.1DB Reducing ElbowsDB CouplingDB ElbowDB FittingsThe DB range of purpose designed quality acetal fittings provide high retention in low pressure poly tubing for long-term reliability of connections.Features• Double barb for increased retention.• Sharp-edged barbs create leak-proof seal.• Increased strength and superior quality.• Heat chemical and wear resistant.• UV stabilized materials for long life.ApplicationsLow pressure micro irrigation systems.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mFITTINGS5.2DB Reducing CouplingDB Reducing Elbow* Sizing chart available at www.antelco.comDB Fittings®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mFITTINGS5.3 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB END PLUG 14 mm 47615 25 50 13.3 DB END PLUG 16 mm 47625 25 50 15.9 DB END PLUG 18 mm 47635 25 50 18.5 DB END PLUG 21 mm 47645 25 40 18.4DB End Plugs TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) END PLUG 13 mm (Single Barb) 44555 25 50 6.0End Plug (Single Barb) TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB TEE 13 mm (tube ID .520) 47405 25 40 18.6 DB TEE 14 mm (tube ID .530) 47415 25 30 17.3 DB TEE 15 mm (tube ID .570) 47395 25 30 18.6 DB TEE 16 mm (tube ID .600) 47425 25 25 16.8 DB TEE 18 mm (tube ID .660) 47435 25 20 16.0 DB TEE 21 mm (tube ID .805) 47445 25 12 12.5 DB TEE 25 mm (tube ID 1.050) 47455 25 10 14.8DB Tees TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB INCREASING TEE 14 mm line x 16 mm branch 47475 25 30 18.3DB Increasing Tees TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB REDUCING TEE 13 mm line x 4 mm branch 47765 25 TBA TBA DB REDUCING TEE 14 mm line x 4 mm branch 47465 25 50 21.3 DB REDUCING TEE 25 mm line x 13 mm branch 47585 25 TBA TBA DB REDUCING TEE 25 mm line x 14 mm branch 47695 25 TBA TBA TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) DB MALE ADAPTER 13 mm x 1/2” MNPT 48035 25 TBA TBA DB MALE ADAPTER 14 mm x 1/2” MNPT 48015 25 50 22.6 DB MALE ADAPTER 15 mm x 1/2” MNPT 48025 25 50 22.9 DB MALE ADAPTER 16 mm x 1/2” MNPT 48045 25 TBA TBADB Reducing TeesDB Male AdapterThe DB range can be confidently installed without clamps when matched to quality low pressure poly tubing with corresponding dimensions (refer to the tubing manufacturer for confirmation of suitability or test under field conditions). Operating pressures should not exceed 50 psi.DB TeeDB End PlugDB Reducing TeeDB Male AdapterDB Increasing TeeCompression ElbowCompression TeeSnap-On & Compression FittingsA range of quick connect and compression fittings specifically to connect polyethylene irrigation tubing. Connect to tap adapters, tap timers, manifold and multi outlet distributors.Features• Simple to use ergonomic design.• Tap Adapter suits snap-on connections.• UV stabilized materials for long life.ApplicationsHome gardens and landscaping applications.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mFITTINGS5.4 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SNAP-ON TAP ADAPTER 3/4” FNHT 45765 25 40 16.5Snap-On Tap Adapters TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SNAP-ON CONNECTOR 1/2” (tube .520 ID) 45465 25 35 26.8 SNAP-ON CONNECTOR 5/8” (tube .570 – .620 ID) 45475 25 32 26.4 SNAP-ON CONNECTOR 3/4” FNHT 44465 25 25 28.5Snap-On Connectors TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SNAP-ON JOINER 1/2” (tube .520 ID) 45455 25 75 15.2Snap-On Joiners TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) FIGURE 8 END CLOSURE (fits tubing up to .720 OD) 51275 25 50 9.9Figure 8 End Closure TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SNAP-ON HOSE KIT 1/2” (tube .520 ID) 52505 25 16 20.7 SNAP-ON HOSE KIT 5/8” (tube .570 – .620 ID) 52515 25 16 20.7Snap-On Hose Kit (Not shown) TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 1/2” Compression TEE (tube .520 ID x .620 OD) 51185 25 8 14.0 5/8” Compression TEE (tube .600 ID x .700 OD) 51525 25 8 14.5 1/2” Compression ELBOW (tube .520 ID x .620 OD) 51195 25 10 12.3 5/8” Compression ELBOW (tube .600 ID x .700 OD) 51535 25 8 10.6 1/2” Compression END CAP (tube .520 ID x .620 OD) 51215 25 10 14.0 5/8” Compression END CAP (tube .600 ID x .700 OD) 51515 25 10 14.0 1/2” Compression COUPLING (tube .520 ID x .620 OD) 51175 25 10 14.0 5/8” Compression COUPLING (tube .600 ID x .700 OD) 51545 25 10 14.5Compression Fittings - 1/2” Green insert / 5/8” Blue InsertSnap-On Tap AdapterSnap-On JoinerSnap-On Connector BarbSnap-On Connector Thread 3/4”Figure 8 End ClosureCompression CouplingPressure Regulating Devices®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.0The Pressure Regulating Micro Manifold converts 1/2” irrigation risers to a multiple outlet micro irrigation system. The Pressure Regulator is ideal for pressure regulation of drip or other low-volume irrigation systems.Features: Pressure Regulators 3/4”• Available in 3/4” hose or pipe thread.• Maintains a preset outlet pressure.• 30 psi regulator; flows from 6 to 420 gph. Features: Pressure Regulating Micro Manifold• Nine outlets pressure regulated to 25 psi.• Outlets can support drip, micro sprays and/or micro stream bubblers.• Inlet screen can be removed and cleaned. ApplicationsPlanters, patios and areas with shrubs, tree or ground cover. Especially useful for a confined area with a mix of plants. TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 9 Outlet Micro Manifold 51305 10 20 20.4Pressure Regulating Micro Manifold TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) Pressure Regulator FNPT Thread x MNPT Thread 51365 25 8 30.5 Pressure Regulator 3/4” (F) Hose x 3/4” Hose (M) 51355 25 8 30.5Lawn & Garden Pressure Regulators DIMENSIONS OPERATION CONNECTION HEIGHT 2.88” INLET PRESSURE 20 – 100 psi INLET BASE 1/2” FNPT WIDTH 2.13” OUTLETS PRESSURE 21 – 28 psi OUTLET BARB to suit 1/4” tubing WEIGHT (approx) 1.25 oz FLOW RANGE TOTAL 0.2 – 3.5 gpm (12 – 210 gph) (Flow per outlet max 210 gph / 9 = 23.3 gph)Specifications: Pressure Regulating Micro Manifold DIMENSIONS OPERATION CONNECTION HEIGHT 3.19” WIDTH 2.50” OUTLETS PRESSURE 30 psi INLET BASE 3/4” FNPT, Hose (F) WEIGHT (approx) 0.1402 oz FLOW RANGE TOTAL 0.1 – 7.0 gpm OUTLET 3/4” MNPT, Hose (M) The Pressure Regulators must always be installed downstream from all shut-off valves, regardless of the applicationSpecifications: Pressure RegulatorsPerformancePressure Regulating Micro Manifold INLET OUTLET PRESSURE (psi) PRESSURE (psi) 0.5 gpm 1.0 gpm 2.0 gpm 3.0 gpm 30 21.6 21.0 20.8 20.2 40 22.5 22.5 22.1 21.7 60 24.8 24.5 24.1 23.5 80 26.9 26.3 25.9 25.5 100 29.1 28.3 27.8 27.3Pressure Regulating Micro ManifoldPressure Regulator 3/4” Hose or Pipe ThreadACCESSORIES6.1®ValvesOn-Off device to control the water flow in low pressure irrigation systems.Features• Simple on-off operation and straight through flow.• Operating pressure range up to 45 psi.• Green Back® cap for standard irrigation applications.• Purple Back® cap for recycled water applications.ApplicationsSecondary zone water diversion and flow control.Always install as an inline valve with tubes connected to both inlet and outlet.A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mVari-Flow™ barb x barbVari-Flow™ thread x threadGreen Back® ValvePurple Back® Valve TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) VARI-FLOW™ VALVE barb x barb 0.18” 42155 50 50 15.6 VARI-FLOW™ VALVE 10-32 UNF thread x 0.18” barb 42135 50 50 15.1 VARI-FLOW™ VALVE thread x thread 10-32 UNF 42115 50 50 14.5 Vari-Flow™ Valves DIMENSIONS ASSEMBLED 13mm, 14mm 18mm, 20mm 25mm 15mm, 16mm HEIGHT 1.6” 2.1” 2.8” LENGTH 3.2” 4.0” 4.9” WIDTH 1.1” 1.6” 2.1” WEIGHT (approx) 0.64 oz 1.5 oz 2.9 oz UV STABILIZED MATERIALS BODY acetal BODY acetal BODY acetal STEM HDPE STEM polypropylene STEM polypropylene COVER nylon COVER nylon COVER nylon BASE/CONNECTION TYPE BARB BARB BARB Specifications: Green Back® Valves and Purple Back® Valves DIMENSIONS ASSEMBLED BARB THREAD HEIGHT 0.8” 0.8” LENGTH 1.6” 1.6” WIDTH 0.6” 0.6” WEIGHT (approx) 0.1 oz 0.1 oz UV STABILIZED MATERIALS BODY acetal BODY acetal KNOB HDPE KNOB HDPE BASE/CONNECTION TYPE BARB 0.18” 10-32 UNF THREAD 0.18”Specifications: Vari-Flow™ Valves TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) GREEN BACK® VALVE 13mm - 1/2” (tube .520 ID) 45505 25 20 21.4 GREEN BACK® VALVE 14mm - 1/2” (tube .525 – .590 ID) 45575 25 20 21.4 GREEN BACK® VALVE 15mm - 1/2” (tube .580 – .590 ID) 45555 25 20 21.4 GREEN BACK® VALVE 16mm - 5/8” (tube .570 – .620 ID) 45515 25 20 23.6 GREEN BACK® VALVE 18mm - (tube .660 – .720 ID) 45565 25 8 20.2 GREEN BACK® VALVE 20mm - 3/4” (tube .810 – .820 ID) 45535 25 8 20.7 GREEN BACK® VALVE 25mm - 1” (tube 1.050 ID) 45545 25 3 14.7Green Back® Valves TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) PURPLE BACK® VALVE 13mm - 1/2” (tube .520 ID) 46505 25 20 21.4 PURPLE BACK® VALVE 16mm - 5/8” (tube .570 – .620 ID) 46515 25 20 23.6 PURPLE BACK® VALVE 20mm - 3/4” (tube .810 – .820 ID) 46535 25 8 20.7 PURPLE BACK® VALVE 25mm - 1” (tube 1.050 ID) 46545 25 3 14.7Purple Back® Valves®ValvesThreaded flow control valves for low pressure irrigation systems.Features• 1/2” MNPT threaded inlet.• Simple on-off operation and straight through flow.• Operating pressure range up to 45 psi.• Green Back® cap for standard irrigation applications.• Purple Back® cap for recycled water applications.ApplicationsIndividual dripline control, tank valves, drain valves or where 1/2” MNPT connections are required.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.2Threaded Green Back® ValveThreaded Purple Back® Valve DIMENSIONS ASSEMBLED 13mm, 14mm 15mm, 16mm HEIGHT 1.6” LENGTH 3.2” WIDTH 1.1” WEIGHT (approx) 0.83 oz UV STABILIZED MATERIALS BODY acetal STEM HDPE COVER acetal BASE/CONNECTION TYPE 1/2” MNPT Thread x BARB Specifications: Threaded Green Back® and Purple Back® Valves 1/2” MNPT TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) GREEN BACK® VALVE 13 mm barb x 1/2” MNPT 49005 25 20 21.4 GREEN BACK® VALVE 14 mm barb x 1/2” MNPT 49015 25 20 21.4 GREEN BACK® VALVE 15 mm barb x 1/2” MNPT 49025 25 20 21.4 GREEN BACK® VALVE 16 mm barb x 1/2” MNPT 49035 25 20 23.6Threaded Green Back® Valves 1/2” MNPT TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) PURPLE BACK® VALVE 13 mm barb x 1/2” MNPT 49105 25 20 21.4 PURPLE BACK® VALVE 14 mm barb x 1/2” MNPT 49115 25 20 21.4 PURPLE BACK® VALVE 15 mm barb x 1/2” MNPT 49125 25 20 21.4 PURPLE BACK® VALVE 16 mm barb x 1/2” MNPT 49135 25 20 23.6Threaded Purple Back® Valves 1/2” MNPTFiltersFiltration device designed to trap foreign particles in the water and reduce clogging of emitters.Features• In-Line model with single barb inlet and outlet.• Snap-On model for direct connection to standard tap adapters.• 80 mesh screen filter.• Easily taken apart for cleaning.• Effective compact filter with minimal flow loss.ApplicationsFor low pressure (up to 45 psi) micro irrigation systems.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.3Pressure Loss: 1/2” and 5/8” FilterFlow Rate (gph)Pressure Loss (psi)0 506.0100 2503.0200• 1/2”1504.51.5• 5/8” TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) IN-LINE FILTER 1/2” barb (tube .520 ID) 44355 25 12 19.6 IN-LINE FILTER 5/8” barb (tube .570 - .620 ID) 44365 25 12 19.6In-Line Filters: 80 Mesh Screen TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) SNAP-ON FILTER 1/2” barb (tube .520 ID) 44405 25 10 20.5 SNAP-ON FILTER 5/8” barb (tube .570 - .620 ID) 44415 25 10 20.5Snap-On Filters: 80 Mesh Screen DIMENSIONS 1/2”, 5/8” MATERIAL BASE/CONNECTION TYPE ASSEMBLED LENGTH 5.3” BODY Snap-On Inlet: acetal WIDTH 1.3” BODY Filter & SLEEVE Snap-On: polypropylene Inlet: SNAP-ON CONNECTOR WEIGHT 1.3 oz WASHER: rubber Outlet: BARB 1/2”, 5/8” (approx) SCREEN: HDPESpecifications: Snap-On Filter DIMENSIONS 1/2”, 5/8” MATERIAL BASE/CONNECTION TYPE ASSEMBLED LENGTH 5.2” TAIL Inlet: acetal WIDTH 1.3” BODY Filter & NUT: polypropylene Inlet: BARB 1/2”, 5/8” WEIGHT 1.0 oz WASHER: rubber Outlet: BARB 1/2”, 5/8” (approx) SCREEN: HDPESpecifications: In-Line FilterIn-Line FilterIn-Line Filter screen detailSnap-On FilterThis product has been independently tested by the Australian Irrigation Technology Centre, report No A98052 and A00007.Rigid RisersRigid Risers are used throughout a micro irrigation system in conjunction with micro emitters and fittings.Features• Rigid Risers are available in 4 lengths.• Rigid Risers in plain, barbed, threaded and 1/2” MNPT configuration.• UV stabilized materials for long life.ApplicationsRigid Risers accept all “Quick” thread and 10-32 UNF products (i.e. drippers, sprays and sprinklers).®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.4 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) RISER 6” plain 50115 100 10 11.3 RISER 8” plain 50125 100 10 15.2 RISER 12” plain 50135 100 10 23.0 RISER 18” plain 50145 100 10 33.8Rigid Risers Plain TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) RISER 6” with barbed 0.16” adapter 50215 100 10 12.4 RISER 8” with barbed 0.16” adapter 50225 100 10 15.7 RISER 12” with barbed 0.16” adapter 50235 100 10 23.0 RISER 18” with barbed 0.16” adapter 50245 100 10 34.1Rigid Risers with barbed 0.16” adapter TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) RISER 6” with “Quick” thread adapter 50715 100 10 12.5 RISER 8” with “Quick” thread adapter 50725 100 10 16.5 RISER 12” with “Quick” thread adapter 50735 100 10 23.9 RISER 18” with “Quick” thread adapter 50745 100 10 35.3Rigid Risers with “Quick” thread adapter TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) RISER 6” with 1/2” MNPT adapter 50085 50 10 9.3 RISER 8” with 1/2” MNPT adapter 50095 50 10 11.3 RISER 12” with 1/2” MNPT adapter 50065 50 10 14.6 RISER 18” with 1/2” MNPT adapter 50075 50 8 16.5Rigid Risers with 1/2” MNPT adapterRigid Riser Plain Rigid Riser with barbed 0.16” adapterRigid Riser with “Quick” thread adapterRigid Riser with 1/2” MNPT adapterStakes & Micro Pop-upsThe Asta® Stake range provides a simple solution to the variety of spray heights needed in growing landscape and home gardens. The Micro Pop-Ups are ideal for conversion to low-volume spray irrigation.Features: Asta® Stake Registered Design• Four sizes available; 16” and 21” provide stability and extra height.• Install with flexible vinyl take-off tube for optimum versatility.• Fits all other .272” OD Vinyl tubing or .300” PE Rigid Riser.• UV stabilized materials for long life.• Asta® Stake Adapter adapts Asta® Stake to accept 1/4” tubing & 10-32 thread emitters. Features: 12” Micro Pop-Ups• Two inlet sizes: 1/4” tubing or 1/2” MPT.• Outlet sized for 10-32 or “Quick” thread devices. ApplicationsAgricultural, landscape and home garden applications.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.5Asta® Stake 21”Asta® Stake 16”Asta® Stake 12”Asta® Stake 8”Asta® Stake Hold-Down TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® STAKE 8” 40885 25 28 22.2 ASTA® STAKE 12” 40875 25 24 28.4 ASTA® STAKE 16” 40895 25 12 20.1 ASTA® STAKE 21” 40905 25 10 20.8Asta® Stakes TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 12” Micro Pop-Up 1/4” Barb 51408 50 1 8.4 12” Micro Pop-Up 1/2” MNPT 51428 50 1 8.512” Micro Pop-Ups TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® STAKE ADAPTER 0.16” (F) x 0.18” Barb 41005 50 50 6.0Asta® Stake Adapter TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® STAKE Hold-Down 7”(fits tubing 1/2” - 3/4” OD) 43615 25 25 21.0Asta® Stakes Hold-Down TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 3/8” FNPT x 4 mm or 6 mm Barb Stake 51415 25 8 15.03/8” Stake TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® CLIP STAKE 5 3/4” (fits tubing .225-.275 OD) 43595 25 50 12.3Asta® Clip Stake12” Micro Pop-upsAsta® Clip Stake Asta® Stake Adapter Asta® Stake AssembliesComplete assemblies available for time saving convenience.Features• Pre-Assembled with rigid risers or vinyl tubing for ease of installation.• Adjustable control with Vari-Jet™ Asta® Stake Assembly.• UV stabilized materials for long life.ApplicationsFlowers and vegetable gardens and micro spray installations.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.6 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 360° VARI-JET™ ASTA® STAKE Assembly 50325 25 12 23.1 180° VARI-JET™ ASTA® STAKE Assembly 50315 25 12 23.1 90° VARI-JET™ ASTA® STAKE Assembly 50305 25 12 23.1VARI-JET™ 12” ASTA® STAKE ASSEMBLY with 12” Rigid Riser and 0.16” barb TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 12” ASTA® STAKE with ASTA® STAKE ADAPTER 50345 25 16 20.212” ASTA® STAKE with ASTA® STAKE ADAPTER TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® STAKE Assembly with tubing 50365 25 8 21.812” ASTA® STAKE ASSEMBLY with 24” vinyl tubing and 0.16” barb TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® STAKE ASSEMBLY with VARI-FLOW™ valve & tubing 50355 25 8 23.0 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) ASTA® MM STAKE ASSEMBLY with 36” tubing 55455 25 10 22.012” ASTA® STAKE ASSEMBLY with VARI-FLOW,™ 24” vinyl tubing and 0.16” barbASTA® MM STAKE ASSEMBLY with 36” vinyl tubing and 0.16” barbVari-Jet™ Asta® Stake Assembly W/12” RR Asta® Stake with AdapterAsta® StakeAssembly with 24” tubingAsta® Stakewith Vari-Flow™ valve & tubingAsta® MM Stake Assembly with tubingThe Drip Mate® Professional and Sprinkler Conversion Kits come complete with instructions and all of the essential micro drip components needed to install an efficient drip irrigation system.Features• The Drip Mate® Professional Drip Kit connects directly to a hose tap or can be made to adapt to an existing sprinkler system.• The Sprinkler Conversion Kit converts an existing 1/2” irrigation riser to drip irrigation.• Instructions provided for easy installation.• UV stabilized materials for long life.ApplicationsHome and landscaped gardens, container plants, nurseries, and flower beds.Drip Mate® Professional Drip Kits®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.7System Components Include:• 50 feet 5/8” Mainline Tubing P.E. .600 ID x .700 OD• 50 feet of 1/4” Tubing• 25 Shrubbler® 360° Spike adjustable flow• Snap-On Tap Adapter• Snap-On Filter• Ratchet Clamp• Figure 8 End Closure (2)• Goof Plug (Rack of 10)• Key Punch™• Elbow• Tee TYPE PART PACKS PER CARTON NUMBER CARTON (lbs) DRIP MATE® Professional Drip Kit 83495 4 15.9Drip Mate® Professional Drip KitSystem Components Include:• 9-Outlet Pressure Regulating Micro Manifold w/plugs• 100 feet Distribution Tubing• 9 Shrubbler® 360° Spike adjustable flow TYPE PART PACKS PER CARTON NUMBER CARTON (lbs) DRIP MATE® Sprinkler Conversion Kit 81305 5 9.9Drip Mate® Sprinkler Conversion KitShrubbler® 360°Drip Mate® Professional Drip KitDrip Mate® Sprinkler Conversion KitDrip Mate® Drip & Spray Starter KitsThe Drip Mate® Kits are simple, complete and easy to use. They have been designed to meet your drip irrigation needs and are offered with complete instructions. The Drip Mate® Kits include all of the essential micro drip components needed to install a drip irrigation system.Features• Drip Mate® Kits connect directly to a hose tap or can be used in connection with an existing sprinkler system with a few additional components.• Minimal assembly is required for maximum efficiency.• Instructions provided for easy installation.• UV stabilized materials for long life.ApplicationsSuitable for home gardens, landscaped gardens, container plants, nurseries, and flower beds.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.8System Components Include:• 50 feet 1/2” Mainline Tubing P.E. .520 ID x .620 OD• 50 feet of 1/4” Tubing• 25 Shrubbler® 360° Spike adjustable flow or Spectrum™ 360° Spike• Snap-On Tap Adapter• Snap-On Filter• Ratchet Clamp• Figure 8 End Closure (2)• Goof Plug (Rack of 10)• Key Punch™• Elbow• Tee TYPE PART PACKS PER CARTON NUMBER CARTON (lbs) DRIP MATE® Drip Kit with Shrubbler® 360° 81495 5 21.4 DRIP MATE® Spray Kit with SpectrumTM 360° 82095 5 21.4Drip Mate® Starter KitsShrubbler® 360° Spectrum™ 360°Drip Mate® Starter KitA n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES6.9 TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 1/4” Distribution Tubing Vinyl 50 ft .150 ID x .225 OD 1/4” Distribution Tubing Vinyl 100 ft .150 ID x .225 OD 1/4” Distribution Tubing Vinyl 1000 ft .150 ID x .225 OD 1/4” Distribution Tubing Vinyl 1000 ft .140 ID x .272 OD 50918 1 1 26.4 (for Asta® Assemblies) 51032 1 15 12.9 51035 1 10 15.1 51036 1 2 30.0Distribution Tubing TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) 1/2” Mainline Tubing P.E. 50 ft .520 ID x .620 OD (Fittings - 13 mm) 5/8” Mainline Tubing P.E. 50 ft .600 ID x .700 OD (Fittings - 16 mm) 51072 1 5 10.8 51082 1 4 10.0Mainline TubingDistribution TubingMainline Tubing* 24” and 36” cut lengths available upon requestTubingTubing is used throughout a micro irrigation system in conjunction with micro emitters and fittings.Features• Mainline tubing comes in 50 ft lengths.• Distribution tubing in 50 ft, 100 ft, and 1,000 ft lengths.• UV stabilized materials for long life.ApplicationsSuitable for all micro irrigation applications.®Range of multifunctional hand tools to hole punch tube, insert 1/4” emitters and fittings, and cut PE tubing.Features• Key Punch™ makes 0.12” hole in tubing. Hexagonal base to install and remove spray jets and interchange their caps.• Miracle Punch makes 0.18” hole in 1/2” to 3/4” PE tubing.• Pocket Punch makes 0.12” hole in 1/2” PE tubing, installs and removes emitters.• Punch ‘n’ Cut makes 0.12” or 0.18” hole into a range of PE tubing sizes, installs and removes emitters, and cuts PE tubing and PVC up to 1”.ApplicationsSuitable for all micro irrigation applications. TYPE PART PACK PACKS PER CARTON NUMBER QUANTITY CARTON (lbs) KEY PUNCH™ 42315 25 50 11.4 MIRACLE PUNCH 50038 1 25 4.7 POCKET PUNCH 50048 1 50 6.4 PUNCH ‘n’ Cut 51098 1 TBA TBAPunchesKey Punch™Miracle PunchPunches®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o mACCESSORIES7.0Pocket PunchPunch ‘n’ CutIrrigation Equipment: Facts To Consider• Contract a professional irrigation designer; insist on a system to suit your plants and your soil. • Install efficient micro-irrigation emitters wherever possible. • Install an irrigation controller with multiple programs, seasonal adjustment, and a rain switch. Consider soil moisture devices. • Mulch around your plants to conserve water in the soil. • Irrigate to encourage deep roots - but don’t over-irrigate. • Monitor your water use – you may need expert advice. • Check and clean the various components of your system at the beginning and end of the irrigation season to make sure they are working properly.FILTRATIONIt is easier to clean a single filter than many emitters. An effective filter which protects downstream components, is an important feature of all irrigation systems. Four types of filters are used to protect irrigation systems:Screen filters – typically used for relatively clean water (eg. city water) but not recommended where organics such as algae are present. They usually comprise of a plastic or stainless steel screen and should be manually cleaned on a regular basis according to the degree of clogging that has occurred. Disc filters – these are made up of moulded plastic discs, stacked on top of one another in the filter housing. The discs are grooved according to the rating of the filter. The grooves become gradually blocked over time with the contaminants in the water. Manual cleaning involves loosening the disc cartridge and washing the discs individually. Sand media filters – these filters are pressurized tanks containing sand and are primarily used where organic matter content of the water is high. The dimensions of the sand grains are chosen according to the size of the emitter orifice they are intended to protect. Sand separators – strictly speaking, these are not filters, but are devices that cause the water to be rotated in the body of the equipment. Centrifugal action forces heavier particles within the water to move to the outside of the stream and then fall to the base of the separator where they are collected and can be removed. In summary, screen and disc filters are commonly used to protect drippers, jets, sprayers and mini-sprinklers irrigating residential gardens, and all four filter types are used in large-scale agricultural and commercial irrigation projects. When specifying filtration requirements, it is necessary to refer to the minimum cross section dimensions of drippers and the minimum nozzle size of jets, sprayers and mini sprinklers. The degree of filtration provided by a filter is described either in terms of the size of the holes in the screen in microns, or the number of holes per linear inch. The conversions given below are approximate. Drip Irrigation Although variable, the dimensions of the smallest pathways in drip emitters are unlikely to be less than 0.024”. If organic matter is present in the water at high levels, such an emitter will require protection by a 75 micron / 200 mesh filter. If there is only inorganic matter present, a 175 micron / 80 mesh screen will be adequate.Jets and Sprayers Minimum orifice size is generally not less than 0.032”, in which case a filter with a 100 micron / 140 mesh screen will cope with an organic load in the water. A 250 micron / 60 mesh screen will be adequate if only inorganic material is present. Mini Sprinklers With minimum orifice size around 0.06”, filter screen size can vary from 175 micron / 80 mesh (organic matter present) to 500 micron / 35 mesh (only inorganic matter present). If you are uncertain about the quality of your water supply, or the minimum orifice size of your chosen emitter, seek professional advice.®A n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o m7.1USA Conditions of Sale and Limited WarrantyA n t e l c o i r r i g a t i o n e q u i p m e n t • U S A c a t a l o g • 2 0 1 2 • w w w . a n t e l c o . c o m 7.2Antelco Corporation warrants to its trade customers that its products will be free from original defects in material and workmanship for a period of one year from date of delivery.Within the warranty period and upon due notice and delivery of defective products to Antelco Corporation, Antelco Corporation agrees to repair or replace only product determined by Antelco to be defective. In no event shall Antelco Corporation be liable for payment of any charges or expenses other than the cost of performing its obligation to repair or replace at Antelco’s sole discretion in accordance with this basic commercial warranty.Misuse, neglect or unauthorized repairs shall void this warranty.The warranty is expressly limited to Antelco Corporation products only.Antelco Corporation shall not be liable for incidental or consequential damages of any nature. Antelco Corporation’s sole liability shall be for the repair or replacement of defective parts at Antelco’s sole discretion pursuant with this warranty.This warranty applies only to Antelco Corporation products and expressly does not apply to any product used in conjunction with Antelco Corporation products.Antelco Corporation makes no other warranties expressed or implied. No agent, distributor, representative, or anyone else has the authority to waive, alter, or add to the printed provisions of this warranty, to make any representation or warranty not contained herein, or to extend this warranty to anyone other than the original user. Antelco reserves the right to redesign or modify its products without incurring further liability.Order AcceptanceWe reserve the right to accept or reject any order. Possession of Antelco Corporation’s catalog or price list does not constitute an offer to sell nor a right to purchase.CreditA signed Antelco Corporation credit application is required prior to an account being reviewed for credit approval or discount eligibility. COD may be requested for accounts with credit applications in process.TermsApproved credit applications will receive terms of 2% 10 days/ Net 30 days unless specified otherwise. Past due thereafter. Accounts may be placed on hold or terms revoked due to unsatisfactory payment.Late ChargesA late charge, equal to 5% over the current Federal Reserve Bank Discount Rate, will automatically be assessed on all past due accounts.Minimum OrderMinimum order amount is $100.00 net. Any order not meeting $100.00 net will be charged a $15.00 minimum order handling fee.FreightGround freight will be prepaid in the continental US on orders over $1,250.00 net; Carrier of our choice. Freight will be prepaid and added on all orders under $1,250.00 net.Drop ShipmentsA $5.00 fee will be charged on all drop shipments.Returned MerchandiseNo returns will be accepted without prior approval and a Returned Goods Acceptance issued. Returned goods are subject to a 20% restocking fee. All returned shipments must be freight prepaid. Credit will not be given for obsolete or shopworn equipment. Returned products must be in re-sellable Antelco packaging. Special order items may not be returned for credit.DeliveryDelivery estimates are made in good faith and are subject to government restrictions, failure by our suppliers to deliver, fires, strikes or other causes beyond our control.ShortagesClaims for shortages or errors in shipping must be in writing and will not be recognized after seven days from the date of delivery.PricingWe reserve the right to change prices without notice. We will dispatch goods at the current price. Customers may request confirmation of current prices when ordering.Other Conditions of SalesThe laws of Florida apply to all Antelco Corporation contracts and commercial dealings. When you deal with Antelco Corporation you will be understood to agree to that.State and local laws vary widely on the subject of commercial credit interest and late charges. The Federal Usury Preemption Law currently in effect will apply to all Antelco Corporation transactions wherever applicable.®www.antelco.comSales, Marketing and Warehouse (USA)Antelco Corporation 886 Waterway Place Longwood Florida 32750 USATel +1 407 331 0699 Fax +1 407 331 0169Email info@antelco.comTollfree 1 800 869 7597 Head Office and WarehouseAntelco Pty Ltd ABN 50 008 062 708PO Box 246 Murray Bridge SA 5253 AustraliaTel +61 8 8532 3388 Fax +61 8 8532 4365Email murraybridge@antelco.com.auSales, Marketing, Research and DevelopmentAntelco Pty Ltd ABN 50 008 062 70814–18 Rosslyn Street Mile End SA 5031 AustraliaTel +61 8 8416 9000 Fax +61 8 8416 9099Email adelaide@antelco.com.auSales, Marketing Orders and Warehouse (UK)Antelco UK Ltd17a Chartmoor Road Leighton Buzzard Bedfordshire LU7 4WGUKTel +44 152 585 9990 Fax +44 152 521 7985Email buzz@antelco.co.ukP U T T I N G W A T E R W H E R E I T C O U N T S ®ANTELCO ®