B/6-4x4 version E - Six-Rows Sugar-Beet Harvester Brochure

SIX-ROWS SUGAR-BEET HARVESTER MOD. B/6-4X4 VERSION "E" CO.RI.MA. proposes this sugar-beet harvester as symbol of high technology and quality of the Made in Italy all over the world. A complete and defect-less machine, probably the best expression of the development and improvement over the time. CO.RI.MA. Six-rows, a farther step from the competitors: Complete electronic management of any control and function from cabin and by using last generation monitors Improved and tested harvesting system during over 50 years of experience and research Climate Class Cabin with a/c and heating system and all driver comforts Simple, reliable and ergonomic controls. Diesel engine electronic management and low fuel consumption Autopilot for automatic driving, tested system with sensors to read both leaves and rows < Six-rows Version "E" Technical Characteristics • 428,4 HP (315 kW) ENGINE at 1800 RPM (ECE R24 – emission ECE 97/68 3A phase) • ELECTRONIC MANAGEMENT OF ALL CONTROLS AND FUNCTIONS • CLAAS CABIN WITH AIR CONDITIONING AND HEATING • 4 WHEEL DRIVE • AUTOPILOT FOR AUTOMATIC DRIVE • HYDROSTATIC TRANSMISSION FOR FORWARD DRIVE WITH 4 SPEED GEARS, 2 LOW AND 2 HIGH SPEED GEARS (WITH AUTOMATIC RELEASE OF DOUBLE-TRACTION). • STEERING WITH 3 PRE-SELECTABLE COMBINATIONS: STEERING ON FOUR WHEELS, STEERING WITH PARALLEL AXLES AND STEERING ON FRONT WHEELS • CHASSIS WITH JOINT STEERING SYSTEM • LEAFER WITH HYDRAULIC DEPTH-ADJUSTMENT AND LEAF-SPREADER DISC COMPLETE WITH ROTATING BLADES WITH SCREW FOR LEAVES AND ADVANCED CUTTING DEVICE • INDEPENDENT VIBRATING SHARES (LONGITUDINALLY) WITH SPEED AND HEIGHT HYDRAULICALLY CONTROLLED • PRIMARY ADJUSTMENTS ON THE FORWARD DRIVE’S JOYSTICK AND ELECTRO-HYDRAULIC CONTROLS. • CONVEYOR PADDLES ON DIGGER UNIT. • INDEPENDENT VIBRATING SHARES. • SUGAR-BEET CLEANING WAY MT. 12,5 LONG • CONTAINER WITH 20 M3 CAPACITY • UNLOADING HEIGHT FROM 1,00 METER UNTIL 4,60 METERS • TIME FOR UNLOADING 35 SECONDS • CENTRALIZED LUBRICATION SYSTEM (AUTOMATIC) • SCALPERS WITH SELF-REGULATION OF THE CUT; KNIFE WITH “NEGATIVE CUT” • ALL THE FRONT UNIT (LEAFER AND DIGGER) IS SIDEWAYS SLIDING. • DIGGING UNIT WITH DIGGERS THAT SWING 5 CM. LATERALLY, EQUIPPED WITH ELECTRONIC DEPTH ADJUSTMENT. • COMPUTER WITH ACOUSTIC ALARM AND DISPLAY FOR CONTROLLING THE TURNS OF THE TRANSPORTING BELT, THE TURNS OF THE 2 REAR SPINNING-SPOKE DEVICES, FOR MEASURING DISTANCE, AREA AND SPEED. • COMPUTER FOR SPEED CONTROL DURING HARVESTING, WITH ALARMS FOR CONTAINER FILLING AND WITH CENTRAL CPU CONTROL • LIGHTS FOR NIGHT WORK. • MONITOR WITH TWO TELEVISION CAMERAS. • FRONT WHEELS: 800/65 R32 – 172A8 (30,5-32) Ø MM. 1853 X 818; • REAR WHEELS: 1050/50 R32 – 178A8 Ø MM. 1863 X 1080. • CONTACTS Co.Ri.Ma. srl Via Rossini 148 62011 Cingoli (MC) Italy Phone +39 (0)733-616257 Fax +39 (0)733-614014 www.corima-srl.it info@corima-srl.it CO.RI.MA. IN THE WORLD