Bedding System - Brochure

Data Sheet: MTX_H - Straw Bale Breaker december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_MTX_H_Straw machine_2013_UK.doc Pictures Front outlet on the machine, convayer in background Rear inlet into the machine Bale breaker auger inside the machine, without flexible shear bar. Data Sheet: MTX_H - Straw Bale Breaker december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_MTX_H_Straw machine_2013_UK.doc Machine number 1071-003H (18 m3), 1071-005H (22 m3), 1071-006H (30 m3), 1073-002H (42 m3), 1073-001H (50 m3) Custom tariff number 84369900 Machine paint Machines, guards etc. comes in a color type RAL 3001 red suitable for indoor, non corrosive environment - water and oil resistant -15 to + 60 degrees C, surface purified with alkaline degreaser, painted with a machine primer and here after coating paint. Standard DS/EN 60204-1:2006 Safety of Machinery - Electrical Equipment of Machines, DS/EN ISO 13850 of January 29th 2007 emergency stop, DS/EN ISO 13849-1 safety-related parts of control systems, DS/EN 60204-1: 2006, cable installation method E Machine function The Cormall straw bale breaker is based on our traditional diet feed mixer. The material is filled into the rear of the machine where two bale breaker augers with flexible shear bars destroy bale stamps or round bale structure and fills the material into the two main augers that transport the material to the top. At the top is the material either taken out or reversed to the back of the machine by the molehill in the top. With straw is the machine working as a bale breaker that mixes the straw, breaks up round bales or the stamps of the big bales, and dis-tributes the straw to a hammer mill with a controlled speed by using a auger with frequency control as discharge device thus ensuring regulation of the discharge speed accordingly to the load of material transported to the hammer mill. The machine is placed on load cells with a weight control to ensure the constant refill of material and keeping a certain amount of straw in the machine at all time. Data Sheet: MTX_H - Straw Bale Breaker december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_MTX_H_Straw machine_2013_UK.doc EN/ISO 13849-1 Safety levels: PLr: a, as machine with manual start PLr: c, as machine with automatic start if access is possible and not restricted. Analyzed risk following EN-ISO 13849-1: S F P PLr 1. Mounting: The machine is provided lifting positions that ensures balance when lifting and strong enough to hold machine load. Follow instruction from the manual, when mounting the machine. Work place assessment should be made, before start with mounting. S2 F1 P1 c 2. Operating: a. In automatic: The machine has to be mounted with a filling device, that provides cover for accidental entering into the machine like Cormall BT 170 straw bale table or similar, and with a closed connected outtake cormall twin auger or simi-lar. S2 F1 P1 c b. In manual with front loader: The machine must be specific ordered for this and placed on same floor level as the loader is driving at, to prevent accidental entering of the machine. S2 F1 P1 C 3. Servicing: a. All lubrication positions are from a safe position. S1 F1 P1 A 4. Renovation: a. Change of knifes inside the machine can happen 3-4 times a year. To change knifes one has to go into the machine. Ac-cess into the machine is provided through filling hole from filling device, cormall BT 170 bale table or similar. Before entering the machine must be turned off on the main switch and locked. The filling device must also be turned off. Before entering from filling device, place/drop down over the two bale breaker augers a wood plate, to prevent from step-ping down onto the knifes. Work place assessment should be made. S2 F2 P1 D b. Oil change on the main planetary gears must be made from a build up platform suitable for the job. Work place assessment should be made S1 F1 P1 A 5. Scrapping/recycling: same comment as under 1. Mounting S2 F1 P1 C Data Sheet: MTX_H - Straw Bale Breaker december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_MTX_H_Straw machine_2013_UK.doc I E G H C B A F Dimensions: Mixes 18 m3 22 m3 30 m3 42 m3 50 m3 A 2900 2900 3100 3800 3800 B# 2400 2400 2600 3190 3190 C 2450 2450 2640 3380 3380 D 2550 2550 3040 3290 3290 E 6000 6900 7800 8000 8500 F 4550 5100 5650 5990 6200 G 2050 2300 3030 3030 3500 H 2550 3000 3640 3640 4150 I 2050 2050 2150 2150 2150 weight kg 6800 7900 8900 11200 14100 plate mm 10 10 10 10 10 Shutter mm. 400 900 900 900 900 Auger size 15mm, Ø 600 600 600 800 800