CattleMaster Squeeze Chute with Automatic Headgate- Brochure

RotaRy tilleROperatiOn and assembly manual2to tHe oWNeR:read this manual before operating your equipment. Keep this manual handy for ready reference. require all operators to read this manual carefully and become acquainted with all adjustments and operating procedures before attempting to operate the equipment. replacement manuals can be obtained from your selling dealer.the equipment you have purchased has been carefully engineered and manufactured to provide dependable and satisfactory use. like all mechanical products, it will require cleaning and upkeep. lubricate the unit as specified. please observe all safety information in this manual and safety decals on the equipment. use only genuine service parts. substitute parts will void the warranty and may not meet the required standards for safe and satisfactory operation.throughout this manual, the term impOrtant is used to indicate that failure to observe procedures can cause damage to equipment. the terms CautiOn, WarninG and danGer are used in are used in conjunction with the safety-alert symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items of personal safety.it is tHe puRcHaseR aNd/oR opeRatoR’s RespoNsibility to….read and understand the information contained in this manual.Operate, lubricate, assemble and maintain the equipment in accordance with all instructions and safety procedures in this manual. inspect the equipment and replace or repair any parts that are damaged or worn which under continued operation would cause damage, wear to other parts, or cause a safety hazard. return the equipment or parts to the authorized dealer, from where it was purchased, for service or replacement of defective parts that are covered by warranty. (manufacturer may inspect equipment or parts before warranty claims are honored.) payment of all costs incurred by the dealer for traveling to or transporting the equipment for warranty inspection and or claims.this safety-alert symbol indicates a hazard and means atteNtioNbecoMe aleRt youR saFety is iNVolVedindicates an imminently hazardous situation that, if not avoided, willresult in death or serious injury.indicates a potentially hazardous situation that, if not avoided, couldresult in death or serious injury, and includes hazards that are exposed when guards are removed.indicates a potentially hazardous situation that, if not avoided, mayresult in minor or moderate injury.indicates that failure to observe can cause damage to equipment.indicates helpful information.WaRNiNGdaNGeRcautioN iMpoRtaNtNoteiNtRoductioN3to tHe puRcHaseR:this manual contains valuable information about your new rotary tiller. it has been carefully prepared to give you helpful suggestions for operating, adjusting, servicing and ordering repair parts.Keep this manual in a convenient place for quick and easy reference. study it carefully. you have purchased a dependable and sturdy tiller, but only by proper care and operation can you expect to receive the service and long life designed and built into it.sometime in the future your tiller may need new parts to replace those that are worn or broken. if so, go to your dealer and provide him with the model and part number.Name ____________________________________________________________________________________purchased From _______________________________________________________________________date purchased ________________________________________________________________________Model No. ______________________________________________________________________________serial No. _______________________________________________________________________________custoMeR iNFoRMatioNsafety .........................................................................................................................................4-7safety & instruction decals ........................................................................................................8-9assembly & setup ..................................................................................................................10-13attaching ....................................................................................................................................14sizing ptO ..................................................................................................................................15Operating ...............................................................................................................................15-16maintenance ...............................................................................................................................16parts ......................................................................................................................................17-21all information, illustrations and specifications in this manual are based onthe latest information available at the time of publication. the right isreserved to make changes at any time without notice.table oF coNteNts4tRaiNiNGsafety is a primary concern in the design and manufacturing of our product. unfortunately, our efforts to provide safe equipment can be wiped out by a single careless act of an operator or bystander.in addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, maintenance and storage of this equipment.it has been said, “ the best safety device is an informed, careful operator.” We ask you to be that kind of operator. it is the operator’s responsibility to read and understand all safety and operating instructions in the manual and to follow them. accidents can be avoided.Working with unfamiliar equipment can lead to careless injuries. read this manual, and the manual for your tractor, before assembly or operating, to acquaint yourself with the machines. if this machine is used by any person other than you, or is loaned or rented, it is the rotary tiller owner’s responsibility to make certain that the owner’s manual be available to the operator prior to operating: 1.) reads and understands the operator’s manuals. 2.) is instructed in safe and proper use.Know your controls and how to stop the tractor, engine, and tiller quickly in an emergency. read this manual and the one provided with your tractor.train all new personnel and review instructions frequently with existing workers. be certain only a properly trained and physically able person will operate the machinery. a person who has not read and understood all operating and safety instructions is not qualified to operate the machine. an untrained operator exposes himself and bystanders to possible serious injury or death. if the elderly are assisting with farm work, their physical limitations need to be recognized and accommodated. pRepaRatioNnever operate the tractor and tiller until you have read and completely understand this manual, the tractor Operator’s manual, and each of the safety messages found on the safety signs on the tractor and tiller.personal protection equipment including hardhat, safety glasses, safety shoes, and gloves are recommended during assembly, installation, operation, adjustment, maintenance, repairing, removal, or moving the implement. do not allow long hair, loose fitting clothing, or jewelry to be around equipment.prOlOnGed eXpOsure tO lOud nOise may Cause permanent HearinG lOss tractors with or without tillers attached can often be noisy enough to cause permanent, partial hearing loss. We recommend that you wear hearing protection on a fulltime basis if the noise in the operator’s position exceeds 80 db. noise over 80 db on a long-term basis can cause severe hearing loss. noise over 90 db adjacent to the operator over a long-term basis may cause permanent, total hearing loss. NOTE: Hearing loss from loud noise (from tractors, chain saws, radios, and other such sources close to the ear) is cumulative over a lifetime without hope of natural recovery.Operate the tiller only with a tractor equipped with an approved roll-Over-protective system (rOps). always wear your seat belt. serious injury or even death could result from falling off the tractor — particularly during a turnover when the operator could be pinned under the rOps or the tractor.Clear area to be tilled of stones, branches or other debris that might be thrown or entangled in the tiller, causing injury or damage.Operate only in daylight or good artificial light.ensure tiller is properly mounted, adjusted and in good operating condition.ensure that all safety shielding and safety signs are properly installed and in good condition.staRtiNG aNd stoppiNGCheck the tractor master shield over the ptO stub shaft. make sure it is in good condition and fastened securely to the tractor. purchase a new shield if old shield is damaged or missing.all tractors that are not equipped with a “live” power takeoff (ptO) need to be equipped with an over-running ptO clutch. these are available through most farm equipment stores. saFety(continued on next page)5NOTE: The addition of an over-running PTO clutch may change the length of the PTO driveline required. Pay extra attention to the instructions on the PTO Driveline Installation. Be sure that the driveline system guarding is adequate.tiller operating power is supplied from the tractor ptO. refer to your tractor manual for ptO engagement and disengagement instructions. Know how to stop tractor and tiller quickly in case of an emergency.When engaging ptO, the engine rpm should always be at idle speed. Once engaged and ready to start tilling, raise ptO speed to 540-rpm and maintain throughout tilling operation.opeRatioNthe use of this equipment is subject to certain hazards that cannot be protected against by the mechanical means or product design. all operators of this equipment must read and understand this entire manual, paying particular attention to safety and operating instructions, prior to using. if there is something in this manual you do not understand, ask your supervisor, or your dealer, to explain it to you.most accidents occur because of neglect or carelessness. Keep all helpers and bystanders at least several hundred feet from an operating rotary tiller. Only properly trained people should operate this machine.When machine is operated in populated areas where thrown objects could injure persons or property, operation must be stopped when anyone comes within several hundred feet.the majority of the accidents involve entanglement on the driveline, injury of bystanders by the objects thrown by the rotating tines, and operators being knocked off the tractor by low hanging limbs and then being run over by the tiller. accidents are most likely to occur with machines that are loaned or rented to someone who has not read the owner’s manual and is not familiar with a rotary tiller.the rotary tiller is designed for use only on tractors with the power takeoff (ptO) turning at 540-rpm.install and secure all guards and shields before starting or operating. the tiller tines, driveline guards and tractor, shields should be used and maintained in good working condition. they should be inspected carefully, at least daily, for missing or broken chain links, shields, or guards. (Worn items must be replaced at once to reduce possibility of injury.)disengage power takeoff (ptO) and place transmission in neutral before attempting to start engine.many varied objects, such as wire, cable, rope, or chains, can become entangled in the operating parts of the tiller. these items could then swing outside the housing at greater velocities than the tines. such a situation is extremely hazardous. inspect the cutting area for such objects before tilling. remove any like objects from the site.never allow the tilling tines to contact such items. never assume an area is clear. always Checkalways stop the tractor, disengage ptO, set brake, shut off the tractor engine, remove the ignition key, lower implement to the ground and allow rotating pieces to come to a complete stop before dismounting tractor. never leave equipment unattended with the tractor running.never place hands or feet under tiller with tractor engine running or before you are sure all motion has stopped. stay clear of all moving parts.do not reach or place any part of your body under equipment until it is blocked securely.do not allow riders on the rotary tiller or tractor at anytime. there is no safe place for any riders.do not operate unless all personnel, livestock, and pets are several hundred feet away to prevent injury by thrown objects.never operate tractor and rotary tiller under trees with low hanging limbs. Operators can be knocked off the tractor and then run over by the rotating tines.the rotating parts of this machine have been designed and tested for rugged use. However, they could fail upon impact with heavy, solid objects such as steel guardrails and concrete abutment. such impact could cause the broken objects to be thrown outward at very high velocities. to reduce the possibility of property damage, serious injury, or even death, never allow the tilling tines to contact such obstacles.(continued on next page)saFety(continued from previous page)6stop rotary tiller and tractor immediately upon striking an obstruction. turn engine off, remove key, inspect and repair any damage before resuming operation.stay alert for uneven terrain, holes, rocks, and roots and other hidden hazards. Keep away from drop-offs and hazards that could cause roll over. use extreme care and maintain minimum ground speed when transporting or operating on hillsides, over rough ground and when operating close to ditches or fences. be careful and slow down when turning sharp corners and changing direction on slopes. do not start or stop suddenly on slopes. avoid operation on steep slopes. in extremely uneven terrain, rear wheels weights, front tractor weight, and/or tire ballast should be used to improve stability.pass rotary tiller diagonally through sharp dips and avoid sharp drops to prevent “hanging up” tractor and rotary tiller. practice will improve your skills in maneuvering on rough terrain. always cut down slopes, never across the face. always check tractor manual for proper use on slopes.When using a unit, a minimum 20% of tractor and equipment weight must be on tractor front wheels. Without this weight, tractor could tip over, causing personal injury or death. the weight may be attained with a front end loader, front wheel weights, ballast in the tires or front tractor weights. When attaining a minimum 20% of tractor and equipment weight on the front wheels, you must not exceed the rOps weight certification. Weigh the tractor and equipment. do not guess or estimatetRaNspoRtatioNComply with state and local laws governing highway safety and movement of farm machinery on public roads.the use of flashing amber lights is acceptable in most localities. However, some localities prohibit their use. local laws should be checked for all lighting and marking requirements.at all times, when driving the tractor and equipment on the road or highway under 20 mph (32 kph) use flashing amber warning lights and a slow moving vehicle (smV) identification emblem. do not exceed 20 mph (32 kph). reduce speed on rough roads and surfaces.plan your route to avoid heavy traffic.always install transport locks, pins or brackets before transporting.do not drink and drive.be a safe and courteous driver. always yield to oncoming traffic in all situations, including narrow bridges, intersections, etc. Watch for traffic when operating near or crossing roadways.turn curves or go up or down hills only at a low speed and at a gradual steering angle. make certain that a least 20% of the tractor’s weight is on the front wheels to maintain safe steerage. slow down on rough or uneven surface. always check tractor manual for proper use on slopes.use extreme care and maintain minimum ground and when operating close to ditches or fences. be careful when turning sharp corners.never allow riders on either tractor or tiller.MaiNteNaNceGood maintenance is your responsibility. poor maintenance is an invitation to trouble.Follow good shop practices.Keep service area clean and drybe sure electrical outlets and tools are properly groundeduse adequate light for the job at hand.make sure there is plenty of ventilation. never operate the engine of the towing vehicle in a closed building. the exhaust fumes may cause asphyxiation.before working on this machine, disengage the ptO, shut off the engine, set the brakes, and remove the ignition keys.be certain all moving parts on attachments have come to a complete stop before attempting to perform maintenance.never work under equipment unless it is blocked securely.always use personal protection devices such as eye, hand and hearing protectors, when performing any service or maintenance.Frequently check tiller tines. they should be sharp, free of nicks and cracks and securely fastened.(continued from previous page)saFety(continued on next page)7(continued from previous page)periodically tighten all bolts, nuts, and screws and check that all cotter pins are properly installed to ensure unit is in safe condition.When completing a maintenance or service function, make sure all safety shields and devices are installed before placing unit in service.after servicing, be sure all tools, parts and service equipment are removed from tiller.do not allow debris, grease or oil to build up on any deck or platform.When replacement parts are necessary for periodic maintenance and servicing, genuine factory replacement parts must be used to restore your equipment to original specifications.the manufacturer will not be responsible for injuries or damages caused by use of unapproved parts and/or accessories.a fire extinguisher and the first aid kit should be kept readily accessible while performing maintenance on this equipment.stoRaGeFollowing operation, or when unhooking the tiller, stop the tractor, set the brakes, disengage the ptO, shut off the engine and remove the ignition keys.store the unit in an area away from human activity.do not park equipment where it can be exposed to direct contact to livestock for long periods of time. damage and livestock injury could result.make sure all parked machines are on a hard, level surface and engage all safety devices.equipMeNt saFety GuideliNes safety of the operator and bystanders is one of the main concerns in designing and developing a tiller. However, every year accidents occur which could have been avoided by a few seconds of thought and a more careful approach to handling equipment. you, the operator, can avoid many accidents by observing the following precautions and insist those working with you, or for you, follow them. in order to provide a better view, certain photographs or illustrations in this manual may show an assembly with a safety shield removed. However, equipment should never be operated in this condition. Keep all shields in place. if shield removal becomes necessary for repairs, replace the shield prior to use. replace any safety sign that is not readable or missing. location of such safety signs are indicated in this manual. never use alcoholic beverages or drugs that can hinder alertness or coordination while operating this equipment. Consult your doctor about operating this machine while taking prescription medications. under no circumstances should children under the age of 18 be allowed to work with this equipment. do not allow persons to operate or assemble this unit until they have read this manual and have developed a thorough understanding of the safety precautions and how it works. review the safety instructions with all users annually. this equipment is dangerous to children and persons unfamiliar with its operation. the operator should be a responsible, properly trained and physically able person familiar with farm machinery and trained in this equipment’s operations. if the elderly are assisting with farm work, their physical limitations need to be recognized and accommodated. use a tractor equipped with a roll Over protective system and seat belts. (rOps) never exceed the limits of a piece of machinery. if its ability to do a job, or to do so safely, is in question- dOn’t try it. do not modify the equipment in any way. unauthorized modification could result in serious injury or death and may impair the function and life of the equipment. in addition to the design and the confirmation of this implement, including safety signs and safety equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of personnel involved in the operation, transport, maintenance, and storage of the machine. refer also to safety messages and operation instruction in each of the appropriate sections of the tractor and tiller manuals. pay close attention to the safety signs affixed to the tractor and the tiller.saFety8attentiOn beCOme alert yOur saFety is inVOlVedreplace immediately if damaged4531247826saFety aNd iNstRuctioN decals9attentiOn beCOme alert yOur saFety is inVOlVedreplace immediately if damaged1 WaRNiNG iNJuRy2 eNtaNGleMeNtlubRicatioN Notice43 cRusH poiNt5 GeaR dRiVeN8 liFt HeRe7 RotatiNG tiNessaFety aNd iNstRuctioN decals6 Model #Model: TILLERSerial #: 0 0 11 0 1LIFT HERE10asseMbly aNd setupasseMbliNG(continued on next page)2. insert a lift strap in gearbox mounting frame.3. slowly lift tiller from shipping rack.4. place on level ground for assembly.6. remove ptO shaft.1. With rotary tiller still in rack, set on a level spot for assembly of tiller.tools Needed: socket & wrench sizes are 9/16”, 3/4”, 15/16”, and 1 1/4”. impact wrench preferred.5. remove lift strap.7. remove "a"-arm plates and rear braces with 3/4" wrench and discard bolts.8. remove boxed hardware, ptO shield, and two (2) bushings.11asseMbly aNd setup(continued from previous page)11. attach the rounded end of the brace to the outside of the rear tiller deck bracing.15. attach ptO shield to the “a”-arm plates.12. repeat for opposite side.NOTE: Hand tighten all bolts until otherwise directed in these instructions.9. attach “a”-arm plate to the front of the tiller deck bracing using Category 1 pins and bolts provided.10. repeat for opposite side.13. attach the square end of the rear brace to the inside “a”-arm plates using 1 1/2” spacer.14. assemble bolt and 2 1/4” spacer.16. Fully tighten all bolts.17. assembly of your rotary tiller is now complete. please read next section of this manual for filling remaining unit with oil and lubricating instructions.12asseMbly aNd setup(continued on next page)beFoRe puttiNG RotaRy tilleR iNto seRViceiMpoRtaNt: this tiller was shipped without oil in gearboxes and without grease in grease fittings. uNit Must be seRViced beFoRe usiNG.NOTE: Fill gearbox using gear oil (type GL5-85W 140 or Triple Zero Grease; which can be poured, and has “EP” i.e. “Extreme Pressure” additives).NOTE: For all grease fittings use TYPE/grade II tube grease.1. place rotary tiller so that the deck is secure and level.2. using 7/8” wrench, remove 1/2” vented pipe plug located on front of gearbox above ptO shaft.3. remove check plug located at back of gearbox.6. replace and tighten the 1/2” vented pipe plug and clean away any excess oil.5. replace and tighten the check plug.do Not overfill gearbox. this could cause damage to oil seals and can cause permanent damage to the gearbox. this issue will not be covered under warranty.cautioN 4. Fill gearbox in front using gear oil until oil begins to overflow from check plug hole in rear.7. using 7/8” wrench, remove 1/2” pipe plug located at top of side gearbox (Figure C) and the 1/8” check plug located on side of the side gearbox (Figure d).Figure CFigure d13asseMbly aNd setup10. Grease the grease fitting on the “out-board hub”.11. Grease the two (2) grease fittings on the ptO universal joints.12. Grease the two (2) grease fittings on the ptO safety shield.13. separate the ptO shaft and grease the inner surface.(continued from previous page)do Not overfill gearbox. this could cause damage to oil seals and can cause permanent damage to the gearbox. this issue will not be covered under warranty.cautioN 8. Fill side gearbox using gear oil until the oil begins to overflow from the check plug hole.9. replace and tighten the 1/2” vented pipe plug and the 1/8” check plug. Clean away any excess oil.14attacHiNGattacHiNG to tRactoR1. place tiller and tractor on level ground.2. back tractor into position by lining up lift arms and Category i pins on the tiller. attach lift arms to Category i pins and secure with lynch pins.3. attach top link using Category i lift pin and lynch pin.4. attach ptO driveline and secure anti-rotation chains.5. Once everything is securely attached, raise tiller off the ground and adjust the top link so the tiller sets level from front to back.6. determine if the ptO shaft needs to be shortened.NOTE: Due to the many variations in the tractor hitch points and distances between equipment gearbox input shaft and tractor PTO output shafts, some combinations may require PTO shafts to be shortened as described by the following steps.7. raise and lower tiller in order to locate the shortest distance between equipment gearbox input shaft and tractor ptO output shaft. With the rotary tiller in the shortest distance position shut down the tractor and seCurely blOCK rOtary tiller in pOsitiOn.8. pull apart ptO shaft and attach outer section to tractor ptO output shaft. NOTE: Be sure to pull on PTO shaft section to ensure yoke has locked into place.9. place and hold inner ptO shaft section next to outer section and check if ptO shaft is too long. each section should end approximately 3 inches short of reaching u-joint shield on the opposite section. if the shaft is too long measure 3 inches back from each u-joint shield and mark the other shaft section. be sure to do this for both ptO shaft halves. NOTE: Do not cut PTO shaft sections at this time.Never stand between tractor and rotary tiller while backing up tractor to the hitch.WaRNiNG10. raise rotary tiller and remove blocking. raise and lower rotary tiller in order to locate the longest distance between equipment input shaft and the tractor ptO output shaft. With the rotary tiller in the longest distance position shut down the tractor and seCurely blOCK tHe rOtary tiller in pOsitiOn.11. as in step 5 hold ptO shaft sections together and check for a minimum of 6 inches of overlap. if ptO shaft has been marked for cutting the overlap is the distance measured between the two marks. if the ptO shaft has less than a 6 inch overlap, dO nOt use. Contact your dealer for replacement.NOTE: If the PTO shaft length is too long go to SIZING PTO SHAFT below. 12. apply any multi-purpose grease to the outside of the male (inner) ptO shaft section. assemble ptO shaft and install on rotary tiller and tractor. 13. pull on tractor side of ptO shaft yoke to be sure it has locked in place. make certain ptO shaft shielding is in place and good working condition.14. the ptO shaft shield is a non-rotating design and must be secured prior to equipment use. using the chain on each yoke shield attach to a fixed object on the tractor and equipment ends that will not allow the ptO shaft shield to rotate during operation.153. repeat steps 1 and 2 for other ptO shaft section.4. use a file to deburr ptO shafts. Clean up all chips, burrs and filings from both ends of the ptO shaft.siziNG pto / opeRatiNGsiziNG tHe pto sHaFt1. Cutting the ptO shaft to length.NOTE: Be sure to cut equal lengths of each PTO shaft section. Clamp end of PTO shaft in a vice and cut off shield where marked. (Figure A & B)Figure aFigure b2. using cut section of the shield as a guide cut shaft off the same amount.opeRatiNG iNstRuctioNs1. before each use perform the maintenance described in maintenance section on this page.2. read, understand, and follow the safety information on training, preparation, starting and stopping, operation, transportation, maintenance and storage at the beginning of this manual (pages 4 thru 7).3. With the rotary tiller positioned on level ground, adjust the tractor lift arms so that when lifted, the rotor bar remains parallel to the ground.4. With the rotary tiller attached to the tractor, raise and support the tiller with suitable blocks. adjust the skids, located on the sides of the tiller. the adjustment bolts for both right and left sides should be positioned in the same adjustment hole. this allows the tiller to till the same depth on each side. adjust the back plate, with regulating chain, until the desired mulching effect is found.NOTE: Never attempt to adjust the rotary tiller while the tractor is running.5. raise the tiller and remove the blocks. lower the tiller to the ground.6. With the tractor at idle rpm and the tiller lifted off of the ground, engage ptO and slowly advance throttle to 540 ptO rpm. NOTE: Rotary tiller is designed to run at 540 PTO RPM only.7. select a low gear for the tractor and begin to move forward. tractor ground speed is to be controlled by gear selection only and not engine speed. as the tractor moves forward, slowly lower the tiller down. allow the tiller tines to gradually engage the ground.NOTE: Do not allow the tractor engine or rotary tiller to bog down or stall. This causes undue wear and tear on the tiller and tractor. If this continues to happen reduce ground speed and raise tilling depth of rotary tiller. Never attempt to remove objects from the rotor bar until the tractor has been shut down and the tiller tines have completely stopped.(continued on next page)16(continued from previous page)opeRatiNG / MaiNteNaNce 8. after each use clean all debris from the tiller tines. replace any missing or illegible safety decals. inspect for any damaged or worn parts and replace before next use. store rotary tiller in a dry environment.Never travel at a fast ground speed while using the tiller, this could damage it. Never attempt to turn the tractor or travel in reverse with the pto engaged and the tiller in the ground. always raise the tiller out of the ground when backing up or attempting to turn. Failure to do so may cause damage to the tiller.MaiNteNaNce1. periodically check and maintain proper gear oil level.2. every 8 hours, (1) grease “out-board hub”, (2) ptO shaft universal joints, (3) ptO shaft safety shield and (4) ptO telescoping surface.NOTE: Use only a grade Type II tube grease. Do not grease the slip clutch assembly.3. before each use check to make sure all safety shields are installed and working properly.4. Check tiller tines for cracks and breaks before every use.5. periodically check all nuts and bolts to insure they are tight and secure.6. periodically loosen torque spring bolts and allow slip clutch to slip for approximately two (2) revolutions. loosen the bolts until the springs lose contact with the flange yoke. this ensures that the slip clutch is not in a “locked” position.7. make sure that the clutch slips.8. to retighten the slip clutch, tighten the torque spring bolts until the nut makes contact with the flange yoke and further tighten one and a half turns (1 1/2). this is a good starting point, further adjustments may need to be made based on soil conditions.NOTE: Do not over or under tighten slip clutch assembly or damage may occur.WaRNiNG17paRtsItem NumberPart Number Description1 p-p1806 big bracket2 p-p1804 right lift arm3 p-p1849 left lift arm4 p-p1805 4’ round steel4 p-p1905 5’ round steel4 p-p2005 6’ round steel5 p-p1820 Front Guard plate6 p-p1823/1833 spacer (1,2)7 p-p1811/1812 tine package (right & left) w/ bolts7 p-p1811/1812 4’ Complete tine package (36 pieces)7 p-p1811/1812 5’ Complete tine package (42 pieces)7 p-p1811/1812 6’ Complete tine package (54 pieces)8 p-p1813/1814/1815 tine bolt package (72 pieces)8 p-p1813/1814/1815 tine bolt package (84 pieces)8 p-p1813/1814/1815 tine bolt package (108 pieces)paRtsItem NumberPart Number Description9 p-p1810-1 right Guard plate10 p-p1831-1 left Guard plate11 p-p1826/1827 Chain & shackle Kit12 H-C0100 top Gearbox assembly (rti50)13 H-C0200 side Gearbox assembly (rts50)14 p-p1331 lift pins Cat i15 p-p1855 4’ rotor assembly15 p-p1955 5’ rotor assembly15 p-p2055 6’ rotor assembly16 p-p1808 4’ back plate assembly16 p-p1908 5’ back plate assembly16 p-p2008 6’ back plate assembly17 p-p1800-1 4’ Frame assembly17 p-p1900-1 5’ Frame assembly17 p-p2000-1 6’ Frame assembly18 H-C0300 Outboard Hub assembly (rtd50)19 4-30Qdtl 4# ptO shaft w/Clutch plates20 p-p1870 manual tube2014181210171115131916563897124Rotary tiller parts list18paRtspto driveline parts listItem Number Part Number Description1 p-417012 inner bell shield2 C-l-0-423 inner shield Cap3 C-l-0-424 inner tube bearing4 p-p43301 inner plastic shield tube5 p-p43302 Outer plastic shield tube6 C-l-0-418 Outer tub bearing7 C-l-0-416 Outer shield Cap8 p-p41703 Outer shield9 s-4302 Cross assembly-ring10 C-l-0-427 Cross11 s-306 Zerk Fitting12 C-s40112 inner yoke13 C-s43303 inner tube14 C-s43304 Outer tube15 C-s40111 Outer yoke16 p-p41701 yoke assembly (tractor end)17 C-l-0-43 roll pin/ spring18 Gr-1-140 spl slip Clutch19 s-4306 Chain20 C-l-04-427 Cross Kits2512131415161718222120 201923 248 7 6 5 4 3 2 19101119out-board Hub parts listItem Number Part Number Description1 H-C0311 brg saddle2 H-C0312 Cap3 H-C0253 ring4 H-C0254 Flange5 H-C0321 shaft6 H-C0341 Gasket7 H-C0341 Gasket8 s-307 screw9 s-304 Washer10 s-126 ball bearing11 s-506 nozzle12 s-212 seal13 s-311 screw14 s-312 Washer1210 11541672 3 89paRts20side Gearbox parts listItem Number Part Number Description1 H-C0211 House2 H-C0212 input brg saddle3 H-C0251 spacer i4 H-C0245 sealed Cap5 H-C0221 Gear shaft-input6 H-C0241 Gasket-input7 H-C0242 Gasket-input8 H-C0253 ring9 H-C0222 pinion10 H-C0224 Gear-Output11 H-C0254 Flange12 H-C0223 shaft-Output13 H-C0213 Output brg saddle14 H-C0252 spacer ii15 H-C0243 Gasket-Output16 H-C0244 Gasket Output17 H-C0246 seal18 H-C0214 Cap19 s-212 seal-OutputItem Number Part Number Description20 s-126 bearing21 s-410 retaining ring22 s-301 screw23 s-302 Washer24 s-307 screw25 s-306 Washer26 s-127 bearing27 s-213 seal-input28 s-411 retaining ring29 s-124 bearing30 s-412 retaining ring31 s-406 retaining ring32 s-308 screw33 s-309 Washer34 s-310 screw (inner Hex.)35 s-311 Washer36 s-502 plug pressure relief37 s-503 pipe plug-sq. Head3635111716151413109876543213332 31 30 29 28 27 2625 2324 22 21 20 1918123734paRts21paRtsItem Number Part Number Description1 H-C0122 shaft-Output2 s-122 Key3 H-C0123 Gear-Output4 H-C0111 Housing5 H-C0112 Cap-input6 H-C0121 Cear shaft-input7 s-201 seal8 s-403 retaining ring9 s-305 screw10 s-306 Washer11 H-C0141/42 Gasket12 H-C0151 spacertop Gearbox parts listItem Number Part Number Description13 s-123 bearing14 s-124 bearing15 s-406 retaining ring16 s-209 seal17 H-C0143 Gasket (rectangle)18 H-C0113 Cap19 s-302 Washer20 s-301 screw21 s-504 pipe plug-inner 6f22 H-503 pipe plug-sq. Head23 H-502 pipe pressure relief123456789101112131415161718192021222322Notes23Notest122109