Domries - Model SC - 3- Point Field Cultivator - Manual

The following pages and illustrations are printed to help supply you with the knowledge to betteroperate and service your new DOMRIES equipment.Any piece of equipment needs, and must have a certain amount of service and maintenance to keep it intop running condition. We have attempted to cover all the adjustments required to fit most conditions;however, there may be times special care must be taken to fit a condition.Study this operator's manual carefully and become acquainted with all the adjustments and operatingprocedures before attempting to operate your new equipment. Remember, it is a machine and hasbeen designed and tested to do an efficient job in most operating conditions and will perform in relationto the service it receives.If special attention is required for some conditions, ask your DOMRIES dealer; his Parts and ServiceOrganization will be glad to help and answer any question on operation and service of your newmachine.This symbol is used to call your attention to safety precautions that should be followed by the operatorto avoid accidents. When you see this symbol- Heed Its Warning.It is the responsibility of the user to read the Operator's Manual and understand the safe and correctoperating procedures as pertains to the operation of the product, and to lubricate and maintain theproduct according to the maintenance schedule in the Operator's Manual.The user is responsible for inspecting his machine and for having parts repaired or replaced whencontinued use of the product would cause damage or excessive wear to other parts. It is the user'sresponsibility to deliver his machine to a DOMRIES dealer, for service or replacement of defective partswhich are covered by the standard warranty. When requesting warranty service, you present your copyof delivery record.ATTENTION BECOME ALBERTYOUR SAFETY IS INVOLVEDThis symbol is used to call your attention to safetyprecautions. That should be followed by the operator toavoid accidents. When you see this - Heed Its Warning.Many hours of lost time and much suffering is caused by the failure to practicesimple safety rules.1. READ this manual carefully to acquaint your - self with the Disk Harrow. Opening unfamiliarequipment can cause accidents.2. LOWER IMPLEMENT if possible, when adjusting maintenance work; otherwise BLOCKS ITSECURELY at a workable height.3. When Implement and tractor are parked always lower disk to the ground and place a FLAG OROTHER WAARMING DEVICE on each corner as someone could run or bump into the implement.4. Implement should be DETACHED ONLY in an area where Children DO NOT PLAY.5. DO NOT wear loose fitting clothing that could catch on various parts.6. Machinery should be OPERATED ONLY by those who are RESPONSIBLE AND DEEGATED to do so.7. ONLY ONE PERSON - the operator - should be permitted on the tractor when implement is inoperation, he should be thoroughly familiar with tractor and implement.8. MAKE CERTAIN that everyone is in clear before starting tractor and implement combination.9. BEFORE WORKING under the any hydraulically controlled unit ISSURE it is SECURELY BLOCKED.10. The RATE OF SPEED on hillsides or curves should be regulated so there is no danger of tipping.11. DO Not drive too close to the edge of a ditch or creek.12. REDUCE SPEED when transporting unit to avoid bouncing and momentary loss of steer ability.13. MAKE CERTAIN tractor is equipped with sufficient front end weight to counter-balance the plowweight and maintain stability of front of tractor.14. DO NOT attempt to operate tractor and implement unless you are in the diver seat.15. ALWAYS place transmission in PARK or NEUTRAL, LOCK BRAKES,STOP ENGINE AND REMOVESTART KEY before dismounting from the tractor.16. NEVER stand between tractor and disc when hitching.17. PROVIDE a first aid kit. Treat all scratches, cuts, etc. with proper antiseptic immediately.18. If DECALS become damaged or come off, they should be replaced immediately.19. REMEMBER that safe operation is no accident.1. Use the SLOW MOVING vehicle emblem in daytime and approved warning lights atnight, or during other periods of poor visibility, to prevent highway accidents.4. Due to the width of the implement, US EXTRA CAUTION on highways, far lanes andwhen approaching gates.Phone (559) 673-9143Fax (559) 673-4110~ARRANTYDomries warrant's all products of it's manufacture to be free of defects in material and workmanship under normal usage and maintenancefor the period of one year from the date of delivery to the original purchaser.RETURN GOODSDomries shall have the option of requiring the prepaid return of any parts claimed defective, however, No parts shall be returned withoutDomries warranty form with good authorized number. Goods shall be returned to such location as shall be designed by Domries.Domries will at it's option, either repair or replace, F.O.B. Domries factory. Such parts as appear to to Domries upon inspection, to havebeen defective in materials and/or workmanship. Wearing parts that are determined to be defective are subject to an adjustment based uponuseful life.REPAIRSAny field or repairs must have the authorized repair number from Domries before any work is done. Claim for warranty must be made witha Domries warranty form and repair number.Domries will not accept any charged other than its direct Dealer shop labor costs and part required to remedy such parts and/orworkmanship at its Dealer place of business. The WARRANTY specifically excludes any charges for delivery, transportation, and/orshipping cost.If the dealer is requested by the customer to travel or haul the machine to his shop or repair shop for the purpose of preforming a warrantyobligation or free inspection, it would be for the customers convenience, and the cost of such a trip is to be paid by the customer. Anyarrangement whereby the Dealer agrees to absorb all or a part of the cost is to be made between the Dealer and the Customer. To beconsidered a courtesy to the Customer by their Dealer.LIMITED WARRANTYOutside purchase equipment and accessories (not of Domries manufacture) are warranted only to the extent of the original manufacture'swarranty to Domries.Item limited - Hydraulic cylinders and hose - Bearings - Disc Blades - Wheels - Tires - Tubes - Seals.No Warranty shall be paid by Domries before the part or parts and labor have been paid to Domries by the manufacturer. Domries shallthen compensate the dealer or customer.(1) New product that has been subjected to operation in excess in recommended capacities, misused, negligence, lack of maintenance oraccident or have been altered or repaired in any manner not authorized by Domries.(2) Sharp turns while machine is ground void warranty, with the exception of a drag disc.Domries shall in no event be responsible for any delay or any other consequential or indirect damage in connection with fulfilling anyobligation under this WARRANTY.Domries reserves the right to make change at any time in designs, materials and/or specifications of it's product without becoming liable orobligated in any way to make similar changes in previously manufactured products.This WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES COVERING DOMRIES PRODUCTS and no other Warranties expressedor implied are made or authorized by Domries Enterprises, Inc.This WARRANTY BECAME EFFECTIVE with shipments made on or after August 1st 1998MAIN FRAMEREF# PART # DESCRIPTION WT/LB.1 SCP-1 MAIN FRAME - 6' N/ASCP-2 MAIN FRAME-7' NlASCP-3 MAIN FRAME - 8' N/ASCP-4 MAIN FRAME -10' N/ASCP-5 MAIN FRAME -12' N/ASCP-48 MAIN FRAME - 14' N/A2 SCP-20-6 A - FRAME (6') N/ASCP-20 A - FRAME (7' TO 12') N/ASCP-20-14 A - FRAME (14') N/A3 CS58134-5 BOLT - 5/8" NC. X 1 3/4" LG. GR-5 N/A4 LW58 LOCK WASHER - 5/8" N/A5 N58 NUT - 5/8" N/A6 SCP-21-6 BRACE - A FRAME (6') N/ASCP-21 BRACE - A FRAME (7' TO 8') N/ASCP-21-10,12 BRACE - A FRAME (10' TO 12') NlASCP-21-14 BRACE A - FRAME (14') NlA7 BLD29 PIN - LIFT STEP, CAT I & II NlA8 BLD33 KLICK PIN - 7/16" DIA. NlASHANK ASSEMBLY (SCP-29-KIT)REF# PART # DESCRIPTION WT/LS.1 SCP-30 SPRING STEEL SHANK ONLY 1/2" X 1 3/4" W/ ROLLED EYE N/A2 SCP-32 POINT - STANDARD N/ASCP-32H POINT - HARDFACED (OPTlONAL) NlA3 PB716134-5 PLOW BOLT -7/16" NC. X 1 3/4" LG. GR-5 N/A4 LW716 LOCK WASHER - 7/16" N/A5 N716 NUT - 7/16" N/A6 SCP-35 HOUSING - SPRING CUP, REAR N/A7 CS12112-5 BOLT - 1/2" NC. X 1 1/2" LG. GR-5 N/A8 LW12 LOCK WASHER -1/2" N/A9 N12 NUT -1/2" N/A10 CS38234-5 BOLT - 3/8" NC. X 2 3/4" LG. GR-5 N/A11 LW38 LOCK WASHER - 3/8" N/A12 N38 NUT - 3/8" N/A13 SCP-31 BUSHING - SHANK N/A14 CS12314-8 BOLT - 1/2" NC. X 3 1/4" LG. GR-8 N/A15 SCP-34 HOUSING - SHANK NlA16 CS124-8 BOLT - 1/2' NC. X 4" LG. GR-8 NlA17 SCP40 STUD PLATE - CLAMP N/A18 SCP-36 CUP - SPRING - UPPER N/A19 SCP-37 SPRING N/A20 SCP-38 BOLT - SPRING RETAINER (1/2" X 13" LG.) N/A21 SCP-44 NUT - TUBE N/A22 LN12 LOCK NUT - 1/2" N/AJ~l ·19EXTENSIONSREF# PART # DESCRIPTION WT/LB.1 SCP-24 EXT. FRAME - RH, 1 FT. N/ASCP-25 EXT. FRAME - LH, 1 FT. N/ASCP-26 EXT. FRAME - RH, 1 1/2 FT. N/ASCP-27 EXT. FRAME - LH, 1 1/2 FT. N/A2 CB12112-5 CARRIAGE BOLT -1/2" NC. X 1 1/2" LG. GR-5 N/A3 LW12 LOCK WASHER - 1/2" N/A4 N12 NUT - 1/2" N/A