Finishing Mower- Brochure

A Range of 3-Rotor Finishing Mowers suitable forparks, golf courses, playing fields, leisure areas andgeneral amenity applications. Overlapping rotorsensure 100% cutting over the full width to produce ahigh quality professional finish.Front or Rear Mounting category 1 linkage.Conversion from rear to front mounting is simple - justunbolt and swing the gearbox around, then reverse thelinkage frame.Fully Enclosed Rear deflects cut material and anysolid objects downwards to minimise the risk tobystanders.Pivoting Top Link Bracket with slotted pin mountingallows the machine to follow ground contours toproduce an even finish.Rotor Spindles are mounted in shielded re-greasablebearings for long life and easy maintenance.Height Controlis by means offully pivotingcastor wheelsfitted with solidrubber tyres.Adjustment ofcutting heightbetween 25 and100 mm (1”-4”)is provided bymovable spacersFinishing MowersFinishing MowersFinishing MowersBLACKWATER, TRURO, CORNWALL TR4 8HQTel 01872 560592 Fax 01872 561166E-mail sales@teagle.co.uk Web www.teagle.co.ukModel 120 150 180Min. Tractor Size 7.5 kW (10hp) 11kW (15hp) 15kW (20hp)Cutting Width 1.2m (3’11”) 1.5m (4’11”) 1.8m (5’11”)Overall Width 1.3m (4’3”) 1.6m (5’3”) 1.9m (6’3”)Cutting Height 25-100mm 25-100mm 25-100mmNo.of Rotors 3 3 3Rotor Overlap 11mm 19mm 24mmCutting Speed 74m/sec 92m/sec 110m/secWeight 183 kg (403 lb) 205 kg (451 lb) 258 kg (568 lb)SpecificationsThe company’s policy is one of continuous improvement and development,therefore specifications are subject to change without notice.A Mulching Kit isavailable on all modelsto produce extrachopping and evenspreading. The kitcomprises additionalspecial mulchingblades and housingenclosures to retainthe grass until it isfinely choppedCentral Lubrication fitted as standard on all models for quick andeffective maintenanceAnti - Scalping Roller fitted as standard to reduce the risk of turfdamage when cutting tightly on uneven surfaces.Aerodynamically Designed Blades made from hardened andtempered spring steel, give good lift and effective cutting.Rotor Drive is through easily tensioned B - Section vee belts. Slots areprovided so that tension can easily by checked without removal of theguards. A gearbox jacking screw enables tension to be applied easily.3 Cutting Widths - 180, 150 & 120 cm