HCC Catalog- Brochure

Prices & sPecifications: Prices and specifications are subject to change without notice. All shipments are billed at the price prevailing at the time of shipment. All prices are F.O.B. Spencerville, Ohio. terms: A satisfactory credit reference must be furnished before shipment can be made. Initial orders will be shipped C.O.D., or credit card until a credit line is established. All dealers are required to have a blanket certificate of exemption form for general sales tax on file with us. Any checks returned because of insufficient funds will be charged $25 per occurrance. orders: Phone orders may be placed by calling 800-368-7773. Orders may be mailed to: S.I. Distributing Inc. 13540 Spencerville Road Spencerville, Ohio 45887 Orders may be faxed to: 877-398-8074 Orders may be emailed to: order@sidist.com For best service please fax or email orders to guarantee accuracy. shiPment: All orders will be shipped in the order they are received. Most orders are shipped the same day if they are received before 12:00 p.m. EST. Orders can be shipped UPS ground, UPS second day air, UPS next day air, or any other available means. Orders will be shipped UPS ground unless specified differently by the customer. Truck freight will be used when price competitive to UPS. Shipments to an address other than the billing address will be charged an additional $10.00 drop ship charge. An expedited order charge of $10.00 will be added to all orders received after 12:00 p.m. that request same day shipment by ground. shortages & damages: S.I. Distributing Inc. is not responsible for goods damaged or lost in transit. All claims of freight shortages and/or damages must be noted on the bill of lading or with the driver at the time of delivery. Failure to note any freight shortages and/or damages makes the consignee responsible for all shortages and/or damages to that shipment. S.I. Distributing Inc. will assist the consignee in filing freight shortage and/or damage claims when the consignee noted such at time of delivery. return Policy: Any merchandise being returned must have a Return Goods Authorization number (RGA#) printed clearly on the outside of the box. A Return Goods Authorization number can be obtained by calling S.I. Distributing Inc. Authorized returns must be returned freight prepaid and will be subject to a minimum restocking charge of 15%. A copy of the original sales invoice must be included with all returns. No exceptions. An additional charge will be made if the merchandise is received in less than saleable condition. All merchandise shipped to S.I. Distributing without prior authori- zation is subject to refusal and may be returned freight collect. Warranty returns must fully explain the nature of the defect and the Return Goods Authorization number must be present. s.i. distributing inc. would like to thank you for your business. Successful Innovations describes the type of prod- ucts that we offer. Our goal is to provide the best service and quality products for your dealership and your customers. This is our 2014 catalog, which we publish at the beginning of each year. If you would like additional copies of our catalog, or if we can be of any assistance, please feel free to call 800-368-7773 and ask for any member of our friendly staff. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 11 Martin Planting Attachments ........................................15-20 Mojo Wire .................................................................................... 37 Montezuma Toolboxes .....................................................77-79 Mur-Lok Fittings ........................................................................ 37 Needham Ag V8 Firming Wheel .......................................... 32 NH3 Disc Sealer ......................................................................... 32 One Wrench ................................................................................ 22 Parallel Linkage Rebuild Kits ................................................ 28 Planter Pivot Arm Kits ............................................................. 23 Planter Replacement Parts .................................................... 12 Plastic Wear Blocks ................................................................... 42 Postboxx Mailbox ..................................................................... 73 Precision Meter ............................................................................8 Precision Meter Parts .................................................................9 Quick Crank Trash Whipper Adjuster ................................. 21 Quick Finger ............................................................................... 42 Rasspe Knife Assemblies ........................................................ 70 Rasspe Guards ........................................................................... 71 Radura Disc Mower Blades .................................................... 51 SCH EasyCut II Cutting System ......................................52-53 SCH EasyCut II Kits ..............................................................54-60 SCH EasyCut II Parts ...........................................................62-63 SCH EasyCut II Knifeheads ...............................................64-66 SCH EasyCut II Knife Assemblies ......................................... 61 SCH Pro-Drive Kits .................................................................... 69 SCH Pro-Drive Knife Drive ...............................................67-68 SCH Pro-Flex Lifter................................................... 63 Schuck Cushion Hitches ...................................................74-75 Seed Level Indicator ................................................................ 22 Shield Ag Drill Discs ................................................................. 31 S.I. Belt Meter ............................................................................2-3 S.I. Belt Meter Kits ....................................................................4-7 S.I. Belt Meter Parts .....................................................................7 S.I. Distributing Show Schedule .......................................... 80 Spring Compression Spacers ............................................... 33 Sure Mark Marker Weights .................................................... 27 Sure Stop ..................................................................................... 44 Swift Hitch ................................................................ 74 Tractor Safety Lights ................................................................ 73 Trail-Jet Fertilizer Opener ...................................................... 30 Trash Guard ................................................................................ 27 V-Closing Wheel Bracket for Case IH and White Planters ................................................................... 23 VenHuizen AccuVac Kit .......................................................... 13 WaveVision Seed Tube ............................................................ 11 Table of ConTenTs Bold Type indicates New Products for 2014 Acra-Plant Blu-Jet Parts .......................................................... 40 Acra-Plant Conservation Ripper Points ............................ 41 Acra-Plant Fertilizer Knives ................................................... 40 Acra-Plant Notched Disc Openers ...................................... 39 Acra-Plant Quick Change Fertilizer Knives ...................... 41 Acra-Plant V-Slice Inserts ....................................................... 38 Acre Plus Seed Box Topper .................................................... 26 Air Design Drill Scrapers ........................................................ 26 Air Design Planter Scrapers .................................................. 26 Boule Cristal Strobe Light ...................................................... 72 Bullseye Seed Tube .................................................................. 10 Burvee Bubble-Up Auger ...................................................... 48 Calmar Auger Spout ................................................................ 49 Case-IH Replacement Cutting Parts ..................70-71 Cast-Iron Closing Wheels ....................................................... 25 CleanSweep ................................................................................ 14 Close-N-Till Cast Wheels ......................................................... 25 Closing Wheel Brackets .......................................................... 24 Depth-A-Matic ........................................................................... 21 Down Pressure Spring Package........................................... 28 Ergo Hitch.................................................................................... 76 Finger-Till Cast Wheels ............................................................ 25 Gauge Wheel Cover ................................................................. 27 HCC Flip Reel Kit........................................................................ 49 HCC Gateway Sieves & Chaffers .......................................... 45 HCC Orbit Trac II Reel Kit ........................................................ 46 HCC Paddle Tines ...................................................................... 43 HCC Complete Orbit Trac II Reel .......................................... 47 HCC Replacement Reel Tines ............................................... 44 HCC Smart Till Replacement Parts ...................................... 72 Insecticide Skirt ......................................................................... 30 John Deere Replacement Cutting Parts ............70-71 John Deere Seed Boots .......................................................... 33 John Deere Stabilizer Kit ........................................................ 69 Keeton Seed Firmers .........................................................34-36 Kinze Brush Meter Adapter ................................................... 22 Leatherman Tools ..................................................................... 73 Lockease Hitch Pin ................................................................... 76 M3 Monitor System ................................................................. 29 MagnoJet Spray Nozzles ......................................... 50 Planting Products ...............................................2-41 Harvesting Products ....................................... 42-71 Other Products ................................................. 72-79 S.I. Distributing Show Schedule ......................... 80 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.2 Features: • The S.I. Belt Meter allows the operator to seed with one setting at a determined rate of flow for most seed sizes • A regular even rate of seed flowing from the meter at all times • Seed damage at the meter is greatly reduced or eliminated • There is a positive setting by adjusting meter speed • The flow rate remains constant up to 10 mph • Plants soybeans, wheat and oats Information: Now you can plant the seed population per acre you choose without guessing. Accurate population control is possible even on large seed crops such as soybeans. The S.I. Belt Meter, when mounted on a grain drill, will singulate the seed and maintain accurate population control over a wide range of seed sizes (2,000 to 4,000 actual seeds per pound). The S.I. Belt Meter will plant a known number of seeds for every revolution of the drill shaft. Population rate changes are simply made by using a planter-type rate transmission (chart and sprockets provided) that changes the ratio between the ground drive wheel and the drill drive shaft. Changes in seed size do not affect the planting rate as most fluted type grain drill meters do. Seed flow is greatly improved over all other current designs of grain drill meters. A constant stream of seed flows out the S.I. Belt Meter at any operating speed. Accordingly, a more even flow of seed creates the opportunity for more even spacing in the seed trench. The S.I. Belt Meter is designed to primarily plant the following crops: Soybeans at 2,000 to 4,000 actual seeds per pound, wheat and oats. The S.I. Belt Meter is not designed (and does not work well) on crops planted at low rate or of a non-symmetrical shape such as milo/sorghum, corn, sunflower, cotton and edible beans. Any guess work in setting rate is eliminated. For most seed sizes, the meter will plant your seed at the rate you establish. The conversion pays for itself through seed savings and virtually eliminating seed damage. The S.I. Belt Meter adapts to most John Deere, Great Plains and Case-IH grain drills. The First Significant Technology Change In Grain Drill Meters In Decades Benefits: • You save money due to no over seeding • You make money due to no under seeding • Any variation in seeding rate is eliminated William Romans, the inventor of the S.I. Belt Meter, was awarded the 2005 Iowa Inventor of the Year for his innovative contributions for seed and chemical metering devices. Mr. Romans recognized the problem of measuring seed sowed by grain drills and developed the S.I. Belt Meter to replace the conventional fluted feed wheel. With ever increasing seed costs there is more of a necessity to only plant the population you desire and no more. In addition, the S.I. Belt Meter delivers the same number of seeds with each revolution so re-calibrating is not necessary when changing to a different seed size or variety. John Deere Transmission Great Plains Transmission Case-IH Transmission s.i. belT MeTer VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 3 Measured row-to-row variation in seeding rate produced by a grain drill equipped with a standard fluted-wheel feed system. Due to the row-to-row variation produced by a fluted-feed grain drill, Purdue researchers examined an alternative metering approach. A belt-type metering system that could be fitted to a conventional grain drill was shown to reduce row-to-row variation in grain drill seed delivery during calibration. (Individual belt units replaced each fluted-feed mechanism on a grain drill.) Field plots confirmed that the belt-type metering system produces a significant (37 percent) reduction in plant stand variation. Measured row-to-row variation in seeding rate produced by a grain drill equipped with a belt metering system. Disclaimer Mention of any specific trade names within this publication does not represent a product endorsement on the part of Purdue University or any of its employees. Authors Stephen E. Hawkins, assistant director, Purdue Ag Centers, Agricultural Research Programs, Purdue University Daniel R. Ess, associate professor, Department of Agricultural and Biological Engineering, Purdue University Call for Pricing and availability of Makes and Models not listed. Important: The S.I. Belt Meter is not designed nor will it work properly when planting soybeans that are larger than 2,000 actual seeds per pound. Soybeans must be properly graded so as to not contain soybeans that are larger than 2,000 actual seeds per pound. Larger beans such as tofu and edible beans generally will not work with the S.I. Belt Meter because of the size of the bean. All kits include: • S.I. Belt Meter for each opener • Transmission conversion kit(s) • New seed charts • Installation instructions • Extra belt meter, cutoff brush, cotter pin Illustration of the differences in construction between conventional fluted- wheel and belt-type metering systems. s.i. belT MeTer s.i. belT MeTer KiTs Each Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.4 John Deere Belt Meter Kits Product ID Description Make Model Width Spacing Meters Drives Lift Kit Price BMK12560455 Belt Meter Kit-JD455 25’ 6” John Deere 455 25’ 6” 49 2 0 $4,696.00 BMK12575455 Belt Meter Kit-JD455 25’ 7.5” John Deere 455 25’ 7.5” 40 2 0 $4,029.00 BMK12510455 Belt Meter Kit-JD455 25’ 10” John Deere 455 25’ 10” 30 2 0 $3,292.00 BMK12515455 Belt Meter Kit-JD455 25’ 15” John Deere 455 25’ 15” 20 2 0 $2,555.00 BMK13060455 Belt Meter Kit-JD455 30’ 6” John Deere 455 30’ 6” 60 3 0 $6,044.00 BMK13075455 Belt Meter Kit-JD455 30’ 7.5” John Deere 455 30’ 7.5” 48 3 0 $5,160.00 BMK13010455 Belt Meter Kit-JD455 30’ 10” John Deere 455 30’ 10” 36 3 0 $4,275.00 BMK13015455 Belt Meter Kit-JD455 30’ 15” John Deere 455 30’ 15” 24 3 0 $3,391.00 BMK13575455 Belt Meter Kit-JD455 35’ 7.5” John Deere 455 35’ 7.5” 56 3 0 $5,749.00 BMK13510455 Belt Meter Kit-JD455 35’ 10” John Deere 455 35’ 10” 42 3 0 $4,717.00 BMK11075750 Belt Meter Kit-JD750 10’ 7.5” John Deere 750 10’ 7.5” 16 1 0 $1,720.00 BMK11010750 Belt Meter Kit-JD750 10’ 10” John Deere 750 10’ 10” 12 1 0 $1,425.00 BMK11015750 Belt Meter Kit-JD750 10’ 15” John Deere 750 10’ 15” 8 1 0 $1,130.00 BMK11575750 Belt Meter Kit-JD750 15’ 7.5” John Deere 750 15’ 7.5” 24 1 0 $2,310.00 BMK11510750 Belt Meter Kit-JD750 15’ 10” John Deere 750 15’ 10” 18 1 0 $1,867.00 BMK11515750 Belt Meter Kit-JD750 15’ 15” John Deere 750 15’ 15” 12 1 0 $1,425.00 BMK12075750 Belt Meter Kit-JD750 20’ 7.5” John Deere 750 20’ 7.5” 32 2 0 $3,440.00 BMK12010750 Belt Meter Kit-JD750 20’ 10” John Deere 750 20’ 10” 24 2 0 $2,850.00 BMK12015750 Belt Meter Kit-JD750 20’ 15” John Deere 750 20’ 15” 16 2 0 $2,260.00 BMK13075750 Belt Meter Kit-JD750 30’ 7.5” John Deere 750 30’ 7.5” 48 2 0 $4,619.00 BMK13010750 Belt Meter Kit-JD750 30’ 10” John Deere 750 30’ 10” 36 2 0 $3,735.00 BMK13015750 Belt Meter Kit-JD750 30’ 15” John Deere 750 30’ 15” 24 2 0 $2,850.00 BMK115751520 Belt Meter Kit-JD1520 15’ 7.5” John Deere 1520 15’ 7.5” 24 1 0 $2,310.00 BMK120751520 Belt Meter Kit-JD1520 20’ 7.5” John Deere 1520 20’ 7.5” 32 2 0 $3,440.00 BMK120101520 Belt Meter Kit-JD1520 20’ 10” John Deere 1520 20’ 10” 24 2 0 $2,850.00 BMK115151530 Belt Meter Kit-JD1530 15’ 15” John Deere 1530 15’ 15” 12 1 0 $1,425.00 BMK120151530 Belt Meter Kit-JD1530 20’ 15” John Deere 1530 20’ 15” 16 1 0 $1,720.00 BMK110751560 Belt Meter Kit-JD1560 10’ 7.5” John Deere 1560 10’ 7.5” 16 1 0 $1,720.00 BMK110151560 Belt Meter Kit-JD1560 10’ 15” John Deere 1560 10’ 15” 8 1 0 $1,130.00 BMK115751560 Belt Meter Kit-JD1560 15’ 7.5” John Deere 1560 15’ 7.5” 24 1 0 $2,310.00 BMK115101560 Belt Meter Kit-JD1560 15’ 10” John Deere 1560 15’ 10” 18 1 0 $1,867.00 BMK115151560 Belt Meter Kit-JD1560 15’ 15” John Deere 1560 15’ 15” 12 1 0 $1,425.00 BMK120751560 Belt Meter Kit-JD1560 20’ 7.5” John Deere 1560 20’ 7.5” 32 2 0 $3,440.00 BMK120101560 Belt Meter Kit-JD1560 20’ 10” John Deere 1560 20’ 10” 24 2 0 $2,850.00 BMK120151560 Belt Meter Kit-JD1560 20’ 15” John Deere 1560 20’ 15” 16 2 0 $2,260.00 BMK130751560 Belt Meter Kit-JD1560 30’ 7.5” John Deere 1560 30’ 7.5” 48 2 0 $4,619.00 BMK130101560 Belt Meter Kit-JD1560 30’ 10” John Deere 1560 30’ 10” 36 2 0 $3,735.00 BMK130151560 Belt Meter Kit-JD1560 30’ 15” John Deere 1560 30’ 15” 24 2 0 $2,850.00 BMK110751590 Belt Meter Kit-JD1590 10’ 7.5” John Deere 1590 10’ 7.5” 16 1 0 $1,720.00 BMK110151590 Belt Meter Kit-JD1590 10’ 15” John Deere 1590 10’ 15” 8 1 0 $1,130.00 BMK115751590 Belt Meter Kit-JD1590 15’ 7.5” John Deere 1590 15’ 7.5” 24 1 0 $2,310.00 BMK115101590 Belt Meter Kit-JD1590 15’ 10” John Deere 1590 15’ 10” 18 1 0 $1,867.00 BMK115151590 Belt Meter Kit-JD1590 15’ 15” John Deere 1590 15’ 15” 12 1 0 $1,425.00 BMK120751590 Belt Meter Kit-JD1590 20’ 7.5” John Deere 1590 20’ 7.5” 32 2 0 $3,440.00 BMK120101590 Belt Meter Kit-JD1590 20’ 10” John Deere 1590 20’ 10” 24 2 0 $2,850.00 BMK120151590 Belt Meter Kit-JD1590 20’ 15” John Deere 1590 20’ 15” 16 2 0 $2,260.00 Continued on next page s.i. belT MeTer KiTs Each Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 55 John Deere Belt Meter Kits - Continued Product ID Description Make Model Width Spacing Meters Drives Lift Kit Price BMK130751590 Belt Meter Kit-JD1590 30’ 7.5” John Deere 1590 30’ 7.5” 48 2 0 $4,619.00 BMK130101590 Belt Meter Kit-JD1590 30’ 10” John Deere 1590 30’ 10” 36 2 0 $3,735.00 BMK130151590 Belt Meter Kit-JD1590 30’ 15” John Deere 1590 30’ 15” 24 2 0 $2,850.00 Great Plains Belt Meter Kits* Product ID Description Make Model Width Spacing Meters Drives Lift Kit Price BMK212601200 Belt Meter Kit-GP1200 12’ 6” Great Plains 1200 12’ 6” 24 1 0 $2,310.00 BMK212701200 Belt Meter Kit-GP1200 12’ 7” Great Plains 1200 12’ 7” 20 1 0 $2,015.00 BMK212751200 Belt Meter Kit-GP1200 12’ 7.5” Great Plains 1200 12’ 7.5” 19 1 0 $1,944.00 BMK212801200 Belt Meter Kit-GP1200 12’ 8” Great Plains 1200 12’ 8” 18 1 0 $1,867.00 BMK212101200 Belt Meter Kit-GP1200 12’ 10” Great Plains 1200 12’ 10” 14 1 0 $1,572.00 BMK212701205 Belt Meter Kit-GP1205 12’ 7” Great Plains 1205 12’ 7” 20 1 0 $2,015.00 BMK212701210 Belt Meter Kit-GP1210 12’ 7” Great Plains 1210 12’ 7” 20 1 1 $2,179.00 BMK212751210 Belt Meter Kit-GP1210 12’ 7.5” Great Plains 1210 12’ 7.5” 19 1 1 $2,108.00 BMK212801210 Belt Meter Kit-GP1210 12’ 8” Great Plains 1210 12’ 8” 18 1 1 $2,031.00 BMK212101210 Belt Meter Kit-GP1210 12’ 10” Great Plains 1210 12’ 10” 14 1 1 $1,736.00 BMK215601500 Belt Meter Kit-GP1500 15’ 6” Great Plains 1500 15’ 6” 30 1 0 $2,752.00 BMK215701500 Belt Meter Kit-GP1500 15’ 7” Great Plains 1500 15’ 7” 26 1 0 $2,457.00 BMK215751500 Belt Meter Kit-GP1500 15’ 7.5” Great Plains 1500 15’ 7.5” 24 1 0 $2,310.00 BMK215801500 Belt Meter Kit-GP1500 15’ 8” Great Plains 1500 15’ 8” 22 1 0 $2,162.00 BMK215101500 Belt Meter Kit-GP1500 15’ 10” Great Plains 1500 15’ 10” 18 1 0 $1,867.00 BMK215151500 Belt Meter Kit-GP1500 15’ 15” Great Plains 1500 15’ 15” 12 1 0 $1,425.00 BMK215161500 Belt Meter Kit-GP1500 15’ 16” Great Plains 1500 15’ 16” 12 1 0 $1,425.00 BMK215701510 Belt Meter Kit-GP1510 15’ 7” Great Plains 1510 15’ 7” 26 1 1 $2,621.00 BMK215751510 Belt Meter Kit-GP1510 15’ 7.5” Great Plains 1510 15’ 7.5” 24 1 1 $2,473.00 BMK215801510 Belt Meter Kit-GP1510 15’ 8” Great Plains 1510 15’ 8” 22 1 1 $2,326.00 BMK215101510 Belt Meter Kit-GP1510 15’ 10” Great Plains 1510 15’ 10” 18 1 1 $2,031.00 BMK220602000 Belt Meter Kit-GP2000 20’ 6” Great Plains 2000 20’ 6” 40 2 0 $4,029.00 BMK220702000 Belt Meter Kit-GP2000 20’ 7” Great Plains 2000 20’ 7” 34 2 0 $3,587.00 BMK220752000 Belt Meter Kit-GP2000 20’ 7.5” Great Plains 2000 20’ 7.5” 32 2 0 $3,440.00 BMK220802000 Belt Meter Kit-GP2000 20’ 8” Great Plains 2000 20’ 8” 30 2 0 $3,292.00 BMK220102000 Belt Meter Kit-GP2000 20’ 10” Great Plains 2000 20’ 10” 24 2 0 $2,850.00 BMK220142000 Belt Meter Kit-GP2000 20’ 14” Great Plains 2000 20’ 14” 17 2 0 $2,337.00 BMK220152000 Belt Meter Kit-GP2000 20’ 15” Great Plains 2000 20’ 15” 16 2 0 $2,260.00 BMK220702010 Belt Meter Kit-GP2010 20’ 7” Great Plains 2010 20’ 7” 34 2 1 $3,751.00 BMK220752010 Belt Meter Kit-GP2010 20’ 7.5” Great Plains 2010 20’ 7.5” 32 2 1 $3,604.00 BMK220802010 Belt Meter Kit-GP2010 20’ 8” Great Plains 2010 20’ 8” 30 2 1 $3,456.00 BMK220102010 Belt Meter Kit-GP2010 20’ 10” Great Plains 2010 20’ 10” 24 2 1 $3,014.00 BMK220152015 Belt Meter Kit-GP2015 20’ 15” Great Plains 2015 20’ 15” 16 2 0 $2,260.00 BMK224602400 Belt Meter Kit-GP2400 24’ 6” Great Plains 2400 24’ 6” 48 2 0 $4,619.00 BMK224702400 Belt Meter Kit-GP2400 24’ 7” Great Plains 2400 24’ 7” 40 2 0 $4,029.00 BMK224752400 Belt Meter Kit-GP2400 24’ 7.5” Great Plains 2400 24’ 7.5 38 2 0 $3,882.00 BMK224802400 Belt Meter Kit-GP2400 24’ 8” Great Plains 2400 24’ 8” 36 2 0 $3,735.00 BMK224102400 Belt Meter Kit-GP2400 24’ 10” Great Plains 2400 24’ 10” 28 2 0 $3,145.00 BMK224152400 Belt Meter Kit-GP2400 24’ 15” Great Plains 2400 24’ 15” 19 2 0 $2,484.00 Note: For Great Plains, need model number, serial number and if the drill has parallel linkage or markers. Continued on next page s.i. belT MeTer KiTs Each Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.6 s.i. belT MeTer KiTs Each Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin Great Plains Belt Meter Kits - Continued Product ID Description Make Model Width Spacing Meters Drives Lift Kit Price BMK224752410 Belt Meter Kit-GP2410 24’ 7.5” Great Plains 2410 24’ 7.5” 38 2 1 $4,046.00 BMK224802410 Belt Meter Kit-GP2410 24’ 8” Great Plains 2410 24’ 8” 36 2 1 $3,898.00 BMK224102410 Belt Meter Kit-GP2410 24’ 10” Great Plains 2410 24’ 10” 28 2 1 $3,309.00 BMK224152410 Belt Meter Kit-GP2410 24’ 15” Great Plains 2410 24’ 15” 19 2 1 $2,648.00 BMK230753010 Belt Meter Kit-GP3010 30’ 7.5” Great Plains 3010 30’ 7.5” 48 2 1 $4,783.00 BMK230803010 Belt Meter Kit-GP3010 30’ 8” Great Plains 3010 30’ 8” 44 2 1 $4,488.00 BMK230103010 Belt Meter Kit-GP3010 30’ 10” Great Plains 3010 30’ 10” 36 2 1 $3,898.00 BMK230153010 Belt Meter Kit-GP3010 30’ 15” Great Plains 3010 30’ 15” 24 2 1 $3,014.00 BMK224752SF24 Belt Meter Kit-GP2SF24 24’ 7.5” Great Plains 2SF24 24’ 7.5” 38 2 0 $3,882.00 BMK212603PD12 Belt Meter Kit-GP3PD12 12’ 6” Great Plains 3PD12 12’ 6” 24 1 0 $2,310.00 BMK212703PD12 Belt Meter Kit-GP3PD12 12’ 7” Great Plains 3PD12 12’ 7” 20 1 0 $2,015.00 BMK212753PD12 Belt Meter Kit-GP3PD12 12’ 7.5” Great Plains 3PD12 12’ 7.5” 19 1 0 $1,944.00 BMK212803PD12 Belt Meter Kit-GP3PD12 12’ 8” Great Plains 3PD12 12’ 8” 18 1 0 $1,867.00 BMK212103PD12 Belt Meter Kit-GP3PD12 12’ 10” Great Plains 3PD12 12’ 10” 14 1 0 $1,572.00 BMK214083PD14 Belt Meter Kit-GP3PD14 14’ 8” Great Plains 3PD14 14’ 8” 20 1 0 $2,015.00 BMK214083PD14-1 Belt Meter Kit-GP3PD14 14’ 8” W/MARKERS Great Plains 3PD14 14’ 8” 20 1 0 $2,015.00 BMK215603PD15 Belt Meter Kit-GP3PD15 15’ 6” Great Plains 3PD15 15’ 6” 30 1 0 $2,752.00 BMK215703PD15 Belt Meter Kit-GP3PD15 15’ 7” Great Plains 3PD15 15’ 7” 26 1 0 $2,457.00 BMK215703PD15-1 Belt Meter Kit-GP3PD15 15’ 7” W/MARKERS Great Plains 3PD15 15’ 7” 26 1 0 $2,457.00 BMK215753PD15 Belt Meter Kit-GP3PD15 15’ 7.5” Great Plains 3PD15 15’ 7.5” 24 1 0 $2,310.00 BMK215753PD15-1 Belt Meter Kit-GP3PD15 15’ 7.5” W/MARKERS Great Plains 3PD15 15’ 7.5” 24 1 0 $2,310.00 BMK215803PD15 Belt Meter Kit-GP3PD15 15’ 8” Great Plains 3PD15 15’ 8” 22 1 0 $2,162.00 BMK215803PD15-1 Belt Meter Kit-GP3PD15 15’ 8” W/MARKERS Great Plains 3PD15 15’ 8” 22 1 0 $2,162.00 BMK215103PD15 Belt Meter Kit-GP3PD15 15’ 10” Great Plains 3PD15 15’ 10” 18 1 0 $1,867.00 BMK215153PD15 Belt Meter Kit-GP3PD15 15’ 15” Great Plains 3PD15 15’ 15” 12 1 0 $1,425.00 BMK220753PD20 Belt Meter Kit-GP3PD20 20’ 7.5” Great Plains 3PD20 20’ 7.5” 32 2 0 $3,440.00 BMK220803PD20 Belt Meter Kit-GP3PD20 20’ 8” Great Plains 3PD20 20’ 8” 30 2 0 $3,292.00 BMK220803PD20-1 Belt Meter Kit-GP3PD20 20’ 8” W/MARKERS Great Plains 3PD20 20’ 8” 30 2 0 $3,292.00 BMK220103PD20-1 Belt Meter Kit-GP3PD20 20’ 10” W/MARKERS Great Plains 3PD20 20’ 10” 24 2 0 $2,850.00 BMK220153PD20 Belt Meter Kit-GP3PD20 20’ 15” Great Plains 3PD20 20’ 15” 16 2 0 $2,260.00 BMK230702SF30 Belt Meter Kit-GP2SF30 30’ 7” Great Plains SF30 30’ 7” 52 2 0 $4,914.00 BMK24580SS45 Belt Meter Kit-GPSS45 45’ 8” Great Plains SS45 45’ 8” 66 3 0 $6,044.00 BMK23075SS87 Belt Meter Kit-GPSS’87 30’ 7.5” Great Plains SS87 30’ 7.5” 48 2 0 $4,619.00 BMK23015SS87 Belt Meter Kit-GPSS’87 30’ 15” Great Plains SS87 30’ 15” 24 2 0 $2,850.00 Case-IH Belt Meter Kits Product ID Description Make Model Width Spacing Meters Drives Lift Kit Price BMK415705400 Belt Meter Kit-CIH5400 15’ 7” Case IH 5400 15’ 7” 26 1 0 $2,457.00 BMK415755400 Belt Meter Kit-CIH5400 15’ 7.5” Case IH 5400 15’ 7.5” 24 1 0 $2,310.00 BMK415805400 Belt Meter Kit-CIH5400 15’ 8” Case IH 5400 15’ 8” 22 1 0 $2,162.00 BMK415105400 Belt Meter Kit-CIH5400 15’ 10” Case IH 5400 15’ 10” 18 1 0 $1,867.00 BMK415155400 Belt Meter Kit-CIH5400 15’ 15” Case IH 5400 15’ 15” 12 1 0 $1,425.00 BMK420705400 Belt Meter Kit-CIH5400 20’ 7” Case IH 5400 20’ 7” 34 2 0 $3,587.00 BMK420755400 Belt Meter Kit-CIH5400 20’ 7.5” Case IH 5400 20’ 7.5” 32 2 0 $3,440.00 BMK420805400 Belt Meter Kit-CIH5400 20’ 8” Case IH 5400 20’ 8” 30 2 0 $3,292.00 BMK420105400 Belt Meter Kit-CIH5400 20’ 10” Case IH 5400 20’ 10” 24 1 0 $2,310.00 BMK420205400 Belt Meter Kit-CIH5400 20’ 20” Case IH 5400 20’ 20” 12 1 0 $1,425.00 BMK430705500 Belt Meter Kit-CIH5500 30’ 7” Case IH 5500 30’ 7” 52 2 0 $4,914.00 BMK430755500 Belt Meter Kit-CIH5500 30’ 7.5” Case IH 5500 30’ 7.5” 48 2 0 $4,619.00 BMK430105500 Belt Meter Kit-CIH5500 30’ 10” Case IH 5500 30’ 10” 36 2 0 $3,735.00 Continued on next page VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 77 Case-IH Belt Meter Kits - Continued Product ID Description Make Model Width Spacing Meters Drives Lift Kit Price BMK415155400-11 Belt Meter Kit-CIH5400 SS 15’ 15” Case IH 5400SS 15’ 15” 11 1 0 $1,354.00 BMK415155400-12 Belt Meter Kit-CIH5400 SS 15’ 15” Case IH 5400SS 15’ 15” 12 1 0 $1,425.00 BMK420155400-14 Belt Meter Kit-CIH5400 SS 20’ 15” Case IH 5400SS 20’ 15” 14 1 0 $1,572.00 BMK420155400-15 Belt Meter Kit-CIH5400 SS 20’ 15” Case IH 5400SS 20’ 15” 15 1 0 $1,649.00 BMK420155400-16 Belt Meter Kit-CIH5400 SS 20’ 15” Case IH 5400SS 20’ 15” 16 1 0 $1,720.00 BMK430155500 Belt Meter Kit-CIH5500 SS 30’ 15” Case IH 5500SS 30’ 15” 24 2 0 $2,850.00 s.i. belT MeTer KiTs s.i. belT MeTer ParTs Each Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin BMP008151 S.I. Belt Meter Parts Key Product ID Description Qty/Meter Price/Each BMP001000 Belt Meter, John Deere, complete $79.00 BMP001005 Retaining cap, John Deere (not shown; fits on top of meter 1 $7.20 BMP001500 Belt Meter, clear, with handle, for display purposes only, complete $79.00 BMP002000 Belt Meter, Great Plains, angled top, complete $79.00 BMP002005 Retaining cap, Great Plains, angled top (not shown; fits on top of meter 1 $7.20 BMP003000 Belt Meter, Great Plains, Case-IH, flat top, complete $79.00 BMP003005 Retaining cap, Great Plains, Case-IH, flat top (not shown; fits on top of meter 1 $7.20 1 BMP005000 Meter housing, John Deere, right hand 1 $11.85 2 BMP005001 Meter housing, John Deere, left hand 1 $11.85 BMP005002 Meter housing, Great Plains, Case-IH, flat top, left hand 1 $11.85 BMP005003 Meter housing, Great Plains, Case-IH, flat top, right hand 1 $11.85 BMP005004 Meter housing, Great Plains, angled top, left hand 1 $11.85 BMP005005 Meter housing, Great Plains, angled top, right hand 1 $11.85 3 BMP005008 Seed belt 2 $5.95 7 BMP005009 Brush, cutoff 1 $6.95 8 BMP005011 Brush, drop 1 $9.95 6 BMP005012 Drive sprocket 1 $18.75 5 BMP005013 Spool 1 $3.25 4 BMP005014 Lower idler 1 $3.25 10 BMP005015 Screw, Phillips head, #10-24 x 1/2 7 $0.12 11 BMP005016 Flange nut, #10-24 7 $0.25 BMP005018 Cap, plastic, for grass seed tube (not shown) 1 $0.60 9 BMP005022 Cotter pin, humped 1 $0.95 BMP006169 Soybean Screen, to check seed size (not shown) $17.50 S.I. Belt Meter Service Parts Product ID Description Qty/Meter Price/Each BMP008100 Meter disassembly, inspection, repair & reassembly (plus parts) $8.00 BMP008151 Meter fixture, makes disassembly & reassembly of your own meters easier $36.95 BMP001775 Graphite, 1-lb. bottle $5.75 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.8 At 5 mph on 30-inch rows, your meter is turning at 65 rpm. At that speed, precision matters. Springs, fingers, cams, backing plates, belts, housings, covers, brushes, bearings – everything must work together to get seed to the ground every 6.8 inches. In the Precision Meter, everything does work together. Every part is precisely designed, engineered and manufactured to work with every other part. So every 6.8 inches, it plants one seed. Compared to ordinary, less precise meters, this instantly produces more ears, 6+ bushels more, from every acre. At $6.00 per bushel, that’s $36.00 per acre. No wonder many top producers are upgrading to Precision Meters or ordering new planters without meters and adding Precision Meters. The Precision Meter contains the following parts: Precision Finger Set – The shape and design of the finger determines how well it can singulate and hold a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. PopMax Backing Plate – The special Kevlar® impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes. Adjustable Brush – For the first time, with just a set screw, you can change the aggressiveness of your meter. Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles. SkipStop – With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. SureFire Seed Belt – A seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/ double. The new SureFireTM cupped seed belt releases down the center every time for sure spacing and more ears. Please reference chart on pages 12-13 to identify correct seed tube applications. PreCision MeTer When everything works together, every seed ends up where it belongs, producing picket fence stands, maximum yields and an extra $36 per acre for you. Better Seed Spacing for More Harvestable Ears Precision Meters Product ID Description Price PPM343022 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, corn $180.00 PPM343072 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 6-fingers, corn $184.00 PPM343063 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, sweet corn $195.00 PPM343116 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 6-fingers, pumpkin $195.00 PPM343110 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, sunflower $240.00 PPM343025 Precision Meter, John Deere 7200, 7300, 1700 series, 12-fingers, corn $180.00 PPM343099 Precision Meter, John Deere 7200, 7300, 1700 series, 6-fingers, corn $184.00 PPM343101 Precision Meter, John Deere 7200, 7300, 1700 series, 12-fingers, sweet corn $195.00 PPM343030 Precision Meter, Kinze 3000 series, 12 fingers, corn $180.00 PPM343071 Precision Meter, Kinze 3000 series, 6-fingers, corn $184.00 PPM343105 Precision Meter, Kinze 3000 series, 12-fingers, sunflower $240.00 PPM343050 Precision Meter, Great Plains planters, 12-fingers, corn $180.00 PPM343051 Precision Meter, Great Plains planters, 6-fingers, corn $180.00 PPM343055 Precision Meter, Great Plains planters, 12-fingers, sunflower $240.00 Precision Meter & Universal Bullseye Seed Tube Kits Save $8.00 per row Product ID Description Price PPM345020 John Deere 7000, 7100; Kinze 2000 series (PPM343022 & PPM700150) $188.00 PPM345021 John Deere 7200, 7300, 1700 series (PPM343025 & PPM700160) $188.00 PPM345022 Kinze 3000 Series (PPM343030 & PPM700150) $188.00 Precision Meter & Wave Vision Seed Tube Kits Save $13.00 per row Product ID Description Price PPM345026 John Deere 7000, 7100; Kinze 2000 series (PPM343022 & PPM700250) $307.00 PPM345027 John Deere 7200, 7300, 1700 series (PPM343025 & PPM700200) $307.00 PPM345028 Kinze 3000 Series (PPM343030 & PPM700250) $307.00 Note: For planters with Keeton Seed Firmers the new WaveVision firmer tail is required. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 9 Precision Re-Power Kits Save $5.25 Per Row Product ID Description Price PPM345024 Precision Re-Power Kit, John Deere 7000, 7100; Kinze with PPM700150 Bullseye $122.00 PPM345025 Precision Re-Power Kit, John Deere 7200, 7300, 1700 series with PPM700160 Bullseye $122.00 Miscellaneous Service Parts Product ID Description Price PPM343062 Drive Wheel for seed belt $6.50 PPM343098 Cover for Precision Meter, John Deere 7000, Kinze 2000 $8.90 PPM343102 Ash Tray, finger holder $8.00 BMP001775 Graphite, 1-lb. bottle $5.75 PPM930004 Eflow, 80% graphite, 20% talc, 8-lb. container $24.95 Precision Finger Set The shape and design of the finger determines how well it can singulate and hold a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. Precision PopMax Backing Plate The special Kevlar® impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush. Precision Brushes For the first time, with just a set screw, you can change the aggressiveness of the Precision meter. Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles. Precision SkipStop Cover With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion. Precision SureFire Seed Belt A seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/double. The new SureFire™ cupped seed belt releases seed down the center every time for sure spacing and more ears. PreCision MeTer ParTs Precision Finger Set Adjustable Brush SkipStop Cover SureFire Seed Belt PopMax Backing Plate Please reference chart on pages 10-11 to identify correct seed tube applications. Meter Re-Power Plus Kit Includes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover, SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush. Product ID Description Price PPM343029 Precision Finger set, 12-finger, corn $35.00 PPM343053 Precision Finger set, 6-finger, narrow row corn $37.00 PPM343064 Precision Finger set, 12-finger, sweet corn $57.00 PPM343065 Precision Finger set, 6-finger, pumpkin $57.00 PPM343067 Precision Finger set, 12-finger, sunflower $135.00 PPM343104 Precision Finger set, 12-finger, popcorn $57.00 Product ID Description Price PPM342103 Precision PopMax Backing Plate with “A” insert & adjustable brush $38.00 PPM342111 Precision PopMax Backing Plate with “C” insert & brushless blank $38.00 PPM342110 Replacement “A” Insert, most field corn and larger popcorn $7.00 PPM342107 Replacement “B” Insert, flat field corn with heavy seed treatment and small to medium popcorn $7.00 PPM342108 Replacement “C” Insert, sunflower, sweet corn and edible beans $7.00 Product ID Description Price PPM343052 Precision Adjustable Brush $8.00 PPM343049 Pkg of 2, Precision Maroon Brush, Non-Adjustable, for Precision PopMax plate $5.50 PPM343060 T-Handle for Adjustable Brush $3.25 Product ID Description Price PPM343024 Precision SkipStop Cover, with cushion, all except Great Plains $23.00 PPM343014 Replacement SkipStop Cushion $16.50 PPM343073 Replacement SkipStop Cushion, Great Plains $17.00 Product ID Description Price PPM343066 Precision SureFire Seed Belt $12.00 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.10 Seed Tube Bounce or Ricochet Can Ruin the Best Meter Singulation. Every time a seed hits the seed tube wall it slows down. Slow seeds lead to erratic spacing, causing the familiar skip/ double pattern that leads to lost yields. It happens because ordinary seed tubes have catch points that interfere with the seed’s descent. So we eliminated them. In our new BullsEye seed tube, we moved the sensor out of the way - offset it just enough so that it won’t snag the seed. So there’s nothing in the way of a smooth, consistent ride down the tube. And we made that tube out of a special nylon that speeds the seed on its way. We also eliminated the biggest wear issue with seed tubes: the way openers wear away their tips. That not only shortens the tube’s life, it leads to spotty spacing because seeds scatter when they hit that worn spot. Tungsten carbide tips insure that the BullsEye will long outlast ordinary seed tubes. Your replacement costs will plummet. Redesigned Tip for Less Wear • Bullseye (left) • Conventional (right) Bullseye Advantages: • Reduces seed tube bounce • Reduces excessive wear bullseye seed Tube Offset Sensor to Reduce Seed Catchpoints Bullseye Seed Tubes Product ID Description Make Model Seed Tube Opening Notes Price Not Available Not Available Case-IH All PPM700150 Bullseye Seed Tube Great Plains Yield Pro Planters 2-1/4” x 1-3/4” $16.00 PPM700150 Bullseye Seed Tube John Deere 7000, 7100 series 2-1/4” x 1-3/4” $16.00 PPM700150 Bullseye Seed Tube 7200, 7300 series 2-1/4” x 1-3/4” $16.00 PPM700160 Bullseye Seed Tube 7200, 7300 series 3” x 2-1/4” Model year -2006 requires PPM700137 Model year 2007- requires PPM700167 $16.00 PPM700160 Bullseye Seed Tube 1700 series 3” x 2-1/4” $16.00 PPM700150 Bullseye Seed Tube Kinze 2000 series 2-1/4” x 1-3/4” $16.00 PPM700150 Bullseye Seed Tube 3000 series 2-1/4” x 1-3/4” $16.00 PPM700160 Bullseye Seed Tube 3000 series 3” x 2-1/4” Except EdgeVac or KPM III sensors $16.00 PPM700158 Bullseye Seed Tube Monosem All 2-1/4” x 1-3/4” $16.00 PPM700155 Bullseye Seed Tube White 5100 series Modification required $16.00 PPM700155 Bullseye Seed Tube 6000 series $16.00 PPM700155 Bullseye Seed Tube 8000 series $16.00 PPM700155 Bullseye Seed Tube 9000 series $16.00 Bullseye Seed Tubes accept 1/2” and 3/4” diameter sensors Seed Tube Mounting Accessories Product ID Description Price PPM700137 Pkg of 4, pin & clip for John Deere 7200, 1700 series model year -2006 For Bullseye seed tubes on planters with mounting holes in shank. Pin is 1/4” x 2-5/8” long. $5.00 PPM700167 Pkg of 4, spring pin for John Deere 7200, 1700 series model year 2007- For Bullseye seed tubes on planters without mounting holes in shank $10.00 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 11 WaVeVision seed Tube Not compatible with these monitors: AGCO GTA, KPM I, II or III, Kinze Vision, Monosem MPM, SM400SE and GTA. Better information in. Better information out. For measuring population, seed spacing, skips and doubles, you depend on the accuracy of your seed sensors. But optical sensors have four big problems: • Dust looks just like seeds • Doubles look like singles • Dust coats the eyes • They mount at the middle of the seed tube Because optical sensors use light beams, they are susceptible to all the things that can falsely break that beam. That’s why dust is such a prob- lem. Dust that blows up the seed tube looks like seed. So the optical sensor routinely over counts seeds, which undercuts your population. Of course there are times when you can tell dust is the issue – when you’re planting with the wind and your population spikes ten or twenty thou- sand seeds. But more harmful impact is the day-in day-out over reporting of seeds because of dust. And then there is the problem of dust coating the sensor eyes and failing all together. Optical sensors must be mounted at the middle of the seed tube in order to keep them out of the dust. But most of the seed-delaying seed tube bounce happens in the lower part of the tube. So you really don’t have a good idea of seed spacing with an optical sensor. And finally, optical sensors look at the surface of the seed – just the plane that breaks the beam. So, two seeds (a double) that move along the seed tube together will be reported as a single seed, again under reporting the actual population and accurate numbers. WaveVision eliminates these problems and provides good clean information to your monitor. High frequency radio waves, rather than light, engulf seeds so that you get a “three-dimensional” look at seeds. It sees mass, not shape. So doubles look like doubles. The radio waves also see through dust. And that means we can mount the seed sensor where it belongs, at the bottom of the seed tube. Optical sensors can’t distinguish dust and debris from seeds. WaveVision can, and gives you an accurate count. WaveVision Seed Tubes Product ID Description Price PPM700200 WaveVision Seed Tube, John Deere 7200, 7300, 1700 series $140.00 PPM700250 WaveVision Seed Tube, John Deere 7000, 7100; Kinze; Great Plains Yield Pro $140.00 PPM700255 WaveVision Seed Tube, White 5000, 6000, 8000, 9000 series $140.00 PPM700260 WaveVision Seed Tube, Monosem $140.00 PPM700266 WaveVision Power Module, for planters without 2020 SeedSense $125.00 Note: For planters without Precision Planting’s 2020 SeedSense a power module is required. see page 11 for seed Tube Mounting accessories Keeton Seed Firmer Tails Only for WaveVision Product ID Description Price KTN125011 WaveVision Firmer Tail, dry tail only, fits in Universal or Kinze bracket $34.50 KTN115013 WaveVision Firmer Tail, dual tube tail only, fits in Universal or Kinze bracket $34.50 KTN126010 WaveVision Firmer Tail, short low profile tail only, fits in Universal or Kinze bracket $34.50 KTN121006 WaveVision Firmer Tail, long low profile tail only, fits in Universal or Kinze bracket $34.50 Note: For planters with Keeton Seed Firmers a new WaveVision firmer tail is required. Keeton Seed Firmer Kits for WaveVision Product ID Description Price KTN125012 WaveVision Firmer, Universal bracket & dry tail $37.00 KTN115011 WaveVision Firmer, Universal bracket & dual tube tail $37.00 KTN126008 WaveVision Firmer, Universal bracket & short low profile tail $37.00 KTN121004 WaveVision Firmer, Universal bracket & long low profile tail $37.00 KTN125013 WaveVision Firmer, Kinze bracket & dry tail $37.00 KTN115012 WaveVision Firmer, Kinze bracket & dual tube tail $37.00 KTN126009 WaveVision Firmer, Kinze bracket & short low profile tail $37.00 KTN121005 WaveVision Firmer, Kinze bracket & long low profile tail $37.00 Note: For planters with Keeton Seed Firmers the new WaveVision firmer tail is required. 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.12 PlanTer rePlaCeMenT ParTs Planter Replacement Parts Product ID Description Photo Application OEM# Price PLT037474 Double Disc Opener Assembly 15” diameter x 3.5mm thick Includes blade, bearing, hub, dust cap John Deere MaxEmerge series row units Kinze, all White 6000 series AA20242, AA37474, AA55927 GA8324 852063 $29.95 PLT065248 Double Disc Opener Assembly 15” diameter x 3.5mm thick Includes blade, bearing, hub, dust cap John Deere XP series row units AA65248 $31.95 PLT061577 Seed Tube Guard Seed tube guide welded to guard All John Deere planters with curved seed tubes except XP series All Kinze planters with curved seed tube except 3000 series A61577, AA54755 $8.95 PLT080203 Seed Tube Guard Seed tube guide welded to guard John Deere XP series with curved seed tubes A80203 $8.95 PLT054179 Pivot Arm Two required per row John Deere 1700 series; MaxEmerge Plus and Pro units Gauge wheel arm mounts to planter with 16mm x 100mm bolt Gauge wheel mounts to arm with set screw A54179, A79647 $23.25 PLT079648 Pivot Arm Two required per row John Deere 1700 series; MaxEmerge XP and XP Pro units Gauge wheel arm mounts to planter with 16mm x 100mm bolt Gauge wheel mounts to arm with bolt A79648 $23.25 PLT154179 Self Aligning Bushing 16mm (5/8”) inside diameter John Deere late MaxEmerge 2; all MaxEmerge Plus, Pro, XP, XP Pro Used in PLT054179 and PLT079648 kits A57058 $9.95 PLT041968 Pivot Arm Two required per row John Deere 7200, 7300 and early 1760, 1780 MaxEmerge 2 units Gauge wheel arm mounts to planter on 1” diameter pin Gauge wheel mounts to arm with set screw AA41968 $23.25 PLT006614 Pivot Arm Two required per row Kinze 2000 series, 1993-1999 Gauge wheel arm mounts to planter on 1” diameter pin Gauge wheel mounts to arm with bolt GA6614 $21.95 PLT141968 Self Aligning Bushing 1” inside diameter John Deere 7200, 7300 and early 1760, 1780 MaxEmerge 2 units Kinze 2000 series, 1993-1999 Used in PLT006614 and PLT041968 kits A57057 $9.95 PLT035951 Bearing, Gauge Wheel For roll pin style gauge wheels John Deere MaxEmerge, MaxEmerge 2 prior to 1992 Kinze prior to 1993 Case 800, 900, 1200 series (to S/N CBJ0001610) White 5100, 5700 AA35951 128558C91 $8.95 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 13 The features are: • VenHuizen AccuVac 40-hole seed corn plate replaces the 30-cell seed corn disk • The vacuum meter turns slower since the AccuVac 40-hole seed plate makes fewer revolutions to plant the same number of seeds as the original 30-cell disk • Since the vacuum meter is turning slower, the planter can travel at a faster ground speed without increasing meter RPM’s when compared to the original meter • The VenHuizen AccuVac plate allows for better seed pickup on hillsides and in high humidity conditions • The modified adjustable “Seed Singulator Kit” virtually eliminates doubles, which significantly improves the desired planting population. The design of the seed singulator allows for one setting regardless of the seed size • Seed Guide funnels seed to center of seed tube to eliminate seed bounce which causes erratic seed spacing in the row VenHuizen aCCuVaC KiT The VenHuizen AccuVac kit is available for all John Deere vacuum meters including the dual seed inlet meter and Pro-Series meter. Kit includes: • A VenHuizen AccuVac 40-hole seed corn plate • The modified adjustable “Seed Singulator Kit” • Adjustment tool to properly set the singulator kit • New seed guide • Installation hardware and detailed instructions The VenHuizen AccuVac Kit for John Deere Improves The Desired Planting Population For Corn The VenHuizen AccuVac kit for John Deere can also plant most sizes of seed corn, even mixed sizes, without changing the plate and with minimal vacuum level changes on the planter. VenHuizen AccuVac Kits Product ID Description Price AVC020000 AccuVac Kit, all John Deere except Pro-Series $65.00 AVC020560 AccuVac Kit, John Deere Pro-Series $75.00 VenHuizen AccuVac Service Parts Product ID Description Price AVC020100 Singulator Kit, all John Deere except Pro-Series $35.00 AVC020660 Singulator Kit, Pro-Series $45.00 AVC021100 Package of 4, Seed Guide Kit $20.00 AVC021200 Package of 6, Seed Guide Kit $30.00 AVC030001 Replacement AccuVac Seed Plate $29.95 BMP001775 Graphite, 1-lb. bottle $5.75 PPM930004 Eflow, 80% graphite, 20% talc, 8-lb. container $24.95 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.14 CleansWeeP NOW, with CleanSweep™, you no longer have to hope, but you can manage your row cleaner performance, from the cab, on the go. Row Cleaners are a great planter attachment for handling excessive residue during planting. They remove the plant debris and cre- ate a uniform seedbed; However, too light of setting leaves residue in the row competing for moisture and nutrients. Too heavy of setting tills and moves soil creating trenches and potentially alter planting depth. Properly set row cleaners and floating row cleaners are ways growers could look to reduce these negative impacts, but conditions can vary greatly from field to field, day to day, even row to row. And, making these adjustments are time consuming. Thus, most growers set for the average and hope for good performance. CleanSweep is a dual air cylinder that lets you set and adjust your row cleaners’ down pressure from the cab. 1. Have heavy residue? Add more pressure to sweep away the debris. 2. Have light residue or soft ground? Lighten the pressure and keep the row cleaner floating across the top. The cylinders have a control box mounted in the cab. You set the pounds of pressure from your cab based on the condition you are in. Plus, the pressurized cylinder gives the row cleaner the ability to adjust or “float” across the small changes you encounter such as terrain or varying amounts of debris The CleanSweep system includes air cylinders, lines, air tank, compressor and controller. Available for these row cleaner models: • Martin C125 MTS, MTS-XP, MTS-81, MTS-IH; with or without Martin UMO • Martin C125 MTR, MTR-XP, MTR-81, MTR-IH; with or without Martin UMO • Martin WA1360 BD, BK, BW, BCIH, BDC; with or without Martin UMO • Yetter 2967-007, 2967-029, 2967-035 (short bracket), 2967-035, 2967- 042, 2967-043, 2967-115 Air Compressor & Tank Cab Controller CleanSweep System Planter Rows With Air Compressor Without Air Compressor 8 $2,480.00 $1,930.00 12 $3,120.00 $2,570.00 16 $3,760.00 $3,210.00 24 $5,040.00 $4,490.00 36 $6,960.00 $6,410.00 48 $8,880.00 $8,330.00 54 $9,840.00 $9,290.00 Basic system includes cab controller, air line kit, cylinders & mounting brackets. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 15 1. Row cleaners move residue and lightly till the row 2. Fertilizer opener places liquid fertilizer beside the row 3. Keetons firm the seed in the bottom of the seed trench 4. Spading closing wheels lift and fracture the sidewall 5. Drag chains level and lightly firm the row top MarTin PlanTing aTTaCHMenTs Martin Row Cleaners The Martin-Till Planting System WA1360 Floating Row Cleaner • Most compact floating row cleaner available. Only requires 19” of clearance from planter face plate, 22” when using with no-till coulter and 25” when using with Martin UMO-100 fertilizer opener • Optional rear lever adjustment available (no tools needed, no under planter work) • Optional dial depth adjustment • Wheels can be installed in the intersected, offset, or retracted operating positions Properly designed row cleaners provide a very desirable type of tillage. The row cleaner teeth continuously engage the soil to the shallow depth of 1” to 1-1/2”. This scarifying of the soil’s surface layer makes it easier for the seed openers to open a well-defined “V” but without furrowing out or causing slabbing or flaking. Eliminating furrows is the key to preventing erosion in the row on slopes and the ponding of water over the row in level areas. Martin Row Cleaners come in two basic types: Pin Adjust: Our pin adjust models are more aggressive row cleaners and are particularly useful when a furrow is needed to reach moisture. Pin Adjust models are available for all popular planters. Floating: The WA1360 floating row cleaners are designed to follow the contours of the soil surface, consistently moving residue away from the path of the gauge wheels. This allows the gauge wheels to run in the cleared zone to promote uniform depth control and facilitate quicker soil warning and rapid emergence. Floating models fit most planters and may be used ahead of most no-till coulters and certain fertilizer openers including the Martin UMO-100. All Martin Row Cleaners Feature the Following: • Heavy duty frame • 3/8” thick, heat treated, T-1 wheels • Stationary triple-lip seals • Heavy gauge dust caps • Double tapered bearings • Greaseable hubs A. Intersected Good for no-till conditions B. Offset Use in freshly worked soil or loose sandy conditions. Suitable for no-till. May be used behind certain forward mounted fertilizer openers C. Retracted Use this position if the overall length is too long. WA1360 Operating Positions Optional cam dial depth adjustment Martin WA1360 Floating Row Cleaners Product ID Vendor ID Description Price MRT001360 WA1360 Wrap around floating row cleaner, 13” wheels (mounting bracket not included) $360.50 Martin WA1360 Mounting Brackets Product ID Vendor ID Description Price MRT001361 MT1360KS John Deere 7000, 7100, Kinze, White 6000, 8000 series w/o no-till coulters $65.50 MRT001363* MT1360KU John Deere 7000, 7100, Kinze, White 6000, 8000 series with Martin UMO $75.50 MRT001362 MT1360DS John Deere 7200, 7300, 1700 without no-till coulters $65.50 MRT001368 MT1360DC John Deere 7200, 7300, 1700 with OEM unit mount, no-till coulter $65.50 MRT001365* MT1360DU John Deere 7200, 7300, 1700 with Martin UMO $73.50 MRT001376 MT1360DD John Deere 7200, 7300, 1700 with OEM double disc fertilizer openers $70.00 MRT001367 MT1360KC Kinze with OEM double arm, unit mount, no-till coulter $65.50 MRT001369 MT1360CIH Case-IH 800-1200 series without no-till coulters $88.50 MRT001371* MT1360CU Case-IH 1200, 1300 series with Martin UMO (requires MRT007106 listed below) $85.50 *Only one bracket is required to mount both Martin WA1360 row cleaner and Martin UMO-100 fertilizer opener. Martin WA1360 Accessories Product ID Vendor ID Description Price MRT003002 STW-04 Aluminum side treader wheel (2 required per row) 4-bolt $30.50 MRT003146 WW-04 Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each $21.00 MRT003154 CA-03D Cam adjustment kit, all JD; Kinze w/o no-till coulters; White 6000, 8000 series with UMO; Case-IH 1200 series with UMO, WA1360 row cleaners $61.00 MRT003155 CA-03K Cam adjustment kit, Kinze with OEM no-till coulters, WA1360 row cleaners $64.00 MRT003500 USB-70 Unit set back bracket, John Deere 7000, 7100, Kinze $78.50 MRT003510 USB-72 Unit set back bracket, John Deere 7200, 7300, 1700 Series $112.00 MRT007106 HDP-CIH01 Heavy duty lower parallel linkage set, Case-IH 1200, 1300 series $111.00 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.16 C125 Shown with optional side treader wheels (STW-04) MarTin PlanTing aTTaCHMenTs Martin Row Cleaners STW-04 Side treader wheels increase traction and flotation. Useful in loose soil or extremely heavy residue. Two required per row. DP-01 Adds up to 20 lbs of down pressure to row cleaner. For use when planting in severe soil conditions. CA-02 Allows adjustment in 1/4” increments. USB70 Unit set back kit. Moves planter unit back 6”. WW-04 Wheel weights add weight to row cleaner. Helpful when planting in heavy residue situations. CDP-01 Allows adjustment in 1/4” increments and adds up to 20 lbs of down pressure. C125MTR C125MTR-IH C125MTR-81 C125MTR-XP C125 Floating Row Cleaner • The C-125 was replaced by the WA1360; however it is still available for certain planter configurations such as with aftermarket no-till coulters. • Floats to follow ground contour • Threaded depth adjustment limits down travel while allowing the semi-mounted frame to follow the contour of the land • Moveable axles with the Martin Exclusive D-lock System allow several mounting positions (intersect, offset, retracted) • 13” diameter left- and right-toothed steel wheels with diamond shaped points (15” wheels may be used on certain planters) • Includes internal deflectors protected under U.S. Patent #5,507,351 Side Treader Wheels Our side treader wheels are a very good option, one most customers order, for the floating row cleaners because they help prevent unwanted trenching in softer parts of the field. Recent Farm Journal tests show a large yield increase when using this option. USB72 Unit set back kit. Moves planter unit back 6”. Martin C125 Floating Row Cleaners Product ID Vendor ID Description Price MRT012504 C125 Wrap around floating row cleaner, 13” wheels (mounting bracket not included) $360.50 MRT112504 C125-GPTL Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, LH Includes single wheel row cleaner, mounting bracket & side treader wheel $309.00 MRT212504 C125-GPTR Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, RH Includes single wheel row cleaner, mounting bracket & side treader wheel $309.00 Martin C125 Mounting Brackets Product ID Vendor ID Description Price MRT001400 C125MTR John Deere 7000, 7100, Kinze, White 6000 series, with no-till coulters, 24-3/4” long $65.50 MRT001401 C125MTS-XP John Deere 7200-1700, White 9000, without no-till coulters, 19-5/16” long $65.50 MRT001402 C125MTR-IH Case-IH 800, 900, 1200 series with no-till coulters, 28” long $70.00 MRT001409 C125MTR-81 White 8000 series with no-till coulters, 24-3/4” long $65.50 MRT001404 C125MTR-XP John Deere 7200-1700, White 9000 with no-till coulters; Great Plains 6030; 24-3/4” long $65.50 MRT001412 C125MTR-G1 Great Plains Yield-Pro Planter, 30” rows, use standard C125 row cleaner $65.50 Martin C125 Accessories Product ID Vendor ID Description Price MRT003000 STW-01 Aluminum side treader wheel (2 required per row) 3-bolt $30.50 MRT003001 STW-01K Aluminum side treader wheel (2 required per row) 6-bolt, for Kinze $35.00 MRT003002 STW-04 Aluminum side treader wheel (2 required per row) 4-bolt $30.50 MRT003143 CA-02 Cam adjustment kit, C125 floating row cleaners $42.25 MRT003145 DP-01 Down pressure kit, C125 floating row cleaners $42.25 MRT003146 WW-04 Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each $21.00 MRT003147 CDP-01 Cam adjustment & down pressure kit, C125 floating row cleaners $62.50 MRT003500 USB-70 Unit set back bracket, John Deere 7000, 7100, Kinze $78.50 MRT003510 USB-72 Unit set back bracket, John Deere 7200, 7300, 1700 Series $112.00 Martin Row Cleaner & Spader Wheel Replacement Parts Product ID Vendor ID Description Price MRT003900 TW3813-L3 Wheel, 13” 3-bolt, LH on row cleaner, RH on closing wheels $54.00 MRT003901 TW3813-R3 Wheel, 13” 3-bolt, RH on row cleaner, LH on closing wheels $54.00 MRT003905 TW3813-L4 Wheel, 13” 4-bolt, LH on row cleaner, RH on closing wheels $54.00 MRT003906 TW3813-R4 Wheel, 13” 4-bolt, RH on row cleaner, LH on closing wheels $54.00 MRT003909 TW3813-LK Wheel, 13” 6-bolt, LH on row cleaner, RH on closing wheels $59.00 MRT003910 TW3813-RK Wheel, 13” 6-bolt, RH on row cleaner, LH on closing wheels $59.00 MRT004158 TW3815-L3 Wheel, 15” 3-bolt, LH on row cleaner, RH on closing wheels $63.00 MRT004159 TW3815-R3 Wheel, 15” 3-bolt, RH on row cleaner, LH on closing wheels $63.00 MRT004177 TW3815-L4 Wheel, 15” 4-bolt, LH on row cleaner, RH on closing wheels $63.00 MRT004178 TW3815-R4 Wheel, 15” 4-bolt, RH on row cleaner, LH on closing wheels $63.00 MRT003908 HA13305-D Hub & Axle, 3-bolt, for Martin pin adjust row cleaners, WA1317, WA1330 $78.50 MRT003902 HA13270-D Hub & Axle, 3-bolt, for Martin floating row cleaners, C125 $78.50 MRT003907 HA44270-D Hub & Axle, 4-bolt, for Martin row cleaners, C125, WA1360, WA1332, WA1334, WA1532 $78.50 MRT003903 CHU024 Hub, 3-bolt, for Martin closing wheels with single bearing, 5/8” I.D. $42.25 MRT004167 CHU022 Hub, 3-bolt, for Martin closing wheels with two bearings, 17mm I.D. $42.25 MRT004190 CHU044-B2 Hub, 4-bolt, for Martin closing wheels with single bearing, 5/8” I.D. $61.00 MRT004175 CHU44-A Hub, 4-bolt, for Martin closing wheels with two bearings, 17mm I.D. $61.00 Note: 13” wheels should be replaced when 12” or less and 15” wheels when 13-3/4” or less VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 17 The Martin original style row cleaner clears the widest path of any tooth wheel row cleaner on the market. The 15” diameter, 3/8” thick, T-1 heat-treated wheels are made left and right in order to shed the residue better. The axles are located to the rear of the adjustable stem in order to insure a simultaneous stretching and cutting of the residue. The teeth on the cleaning wheels actually reach past the edge of the planter gauge wheel rubber. Martin Pin Adjust Row Cleaners WA1532 Martin Original Style Row Cleaner • Rigidly mounted directly to planter unit face plate • Easily adjustable in 1/4” increments with lift assist handle and spring • 3/8” thick, 15” diameter, toothed steel wheels with diamond shaped points - largest on the market • Includes internal deflectors protected under U.S. Patent #5,507,351 • Cast 4-bolt hub • Double tapered bearings • Triple lip seals WA1332 and WA1334 Row Cleaners • Rigidly mounted directly to planter unit face plate • Easily adjustable in 1/4” increments with lift assist handle and spring • Movable axles with the Martin Exclusive D-Lock System allow for several mounting positions (intersect, offset, retracted) • 13” diameter toothed steel wheels with diamond shaped points allow plenty of upward adjustment in loosely worked soils • Includes internal deflectors protected under U.S. Patent #5,507,351 WA1332 and WA1334 Operating Positions WA1532 WA1532 Dimensions A. Intersected For use in firm soil conditions and severe residue. B. Left or Right Offset For moderate residue and freshly tilled soil. C. Retracted Can be used behind certain frame mounted coulters. WA1332WA1334 WA1332 Row Cleaner 1-1/2” stem wheel as- sembly. For use with all pin adjust brackets that accept 1-1/2” stem. WA1334 Row Cleaner 2” stem wheel assem- bly. For use with MT892 bracket. A. B. C. MT772 MT892 MT512 MT610 MT810 MT385 MarTin PlanTing aTTaCHMenTs Martin Pin-Adjust Row Cleaners Product ID Vendor ID Description Price MRT001320 WA1320N Pin-adjust row cleaner, narrow row, 1-½” stem, 13” wheels $331.00 MRT001332 WA1332 Pin-adjust row cleaner, 1-½” stem, 13” wheels $333.00 MRT001334 WA1334 Pin-adjust row cleaner, 2” stem for Case-IH planters, 13” wheels $333.00 MRT001532 WA1532 Pin-adjust row cleaner, 1-½” stem, 15” wheels $351.00 Martin Pin-Adjust Mounting Brackets Product ID Vendor ID Description Price MRT002000 MT772 John Deere, Kinze, White EARLY 6000 series with REGULAR down pressure springs and White 9000, accepts 1-½” stem wheel assemblies $74.00 MRT000892 MT892 Case-IH 800, 900 series without heavy duty down pressure springs, accepts 2” stem wheel assemblies $60.00 MRT001250 MT1250 Case-IH 1200, 1300 series, accepts 2” stem wheel assemblies $60.00 MRT002200 MT512 White 5100 series, accepts 1-½” stem wheel assemblies $61.00 MRT000610 MT610 White EARLY 6000 series with HEAVY duty down pressure springs, accepts 1-½” stem wheel assemblies $75.00 MRT002100 MT810 White LATE 6000 series and all 8000 series, accepts 1-½” stem wheel assemblies $79.00 MRT002400 MT385 Deutz-Allis Quadra Disk, Landoll, accepts 1-½” stem wheel assemblies $61.00 MT1250 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.18 Reduced Inner Diameter Gauge Tires FEATURES OF UMO-100: • Sturdy compact design • Double tapered bearing hub • 5mm thick (0.197”) blade • Adjustable furrow control device • Can be set to place liquids 1”, 2”, or 3” from seed row • Can also be set to place liquids 3/4” above, even with or 3/4” below seed depth • Fit John Deere 7000-1700 series, all Kinze, White 6000 & 8000 series and Case-IH 1200 & 1300 series. • Patent #7,481,171 UMO-100 Fertilizer Opener The fertilizer opener mounts directly to the planting unit and is compact enough to be mounted within the WA1360 and C125 floating row cleaners. Because the opener mounts directly to the planter unit, the fertilizer is always precisely the same distance from the seed even when planting on the contour. The lateral spacing from the seed can be 1”, 2”, or 3”, and there are three vertical settings that allow fertilizer to be placed 3/4” above, even with, or 3/4” below seed depth. We like the way it consistently places the fertilizer in the ground without splattering on the planter. RID-01 Tire • Reduced inner diameter gauge tires • Allows seed trench to lift and fracture • Softer, more flexible compound better sheds wet soil • Fits existing John Deere, Kinze, and White rims • Two required per row Note: Reduced inner diameter gauge tires are NOT recommended for use in tilled soil conditions. Requires 13-1/2” of clearance from face plate of row unit. Apply nitrogen to side of seed furrow in a single pass. MarTin PlanTing aTTaCHMenTs Twisted Drag Chain DCK-01 drag chain kit • Crumbles, fills unclosed areas and levels soil above the seed slot • Heavy-duty, square-edged cross chain and brackets • Attaches to closing wheel brackets • Bolts to all John Deere Max-Emerge units • Fits Kinze and White units with bolt-on wheels • Kinze units with roll pin attached closing wheels will need holes drilled for mounting Product ID Vendor ID Description Price MRT003600 DCK-01 Drag chain kit $38.00 UMO-100 Martin Unit Mounted Fertilizer Opener Product ID Vendor ID Description Price MRT100100 UMO-100L Single disk unit mounted fertilizer opener, left $369.00 MRT200100 UMO-100R Single disk unit mounted fertilizer opener, right $369.00 Martin Unit Mounted Fertilizer Opener Brackets Product ID Vendor ID Description Price MRT000300 UMO-MTJ Bracket, John Deere 7200-1700, White 9000 series planters $34.00 MRT000301 UMO-MTA Bracket, John Deere 7000, 7100 and Kinze planters $34.00 MRT000302 UMO-MTW Bracket, White 8000 series planters $34.00 MRT000303 UMO-MTG Bracket, Great Plains Yield-Pro Planter, mounts on top of standard C125 bracket $34.00 Product ID Vendor ID Description Price MRT003730 RID-01 RID tire, John Deere except XP, Kinze, White planters; JD 50, 60 & 90 series drills (2 required per row) $24.95 MRT003731 N/A RID tire, John Deere XP row units (2 required per row) $34.95 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 19 Spading Closing Wheels Martin spading closing wheels move soil toward the seed at planting depth, while lifting and fracturing the surface layer to achieve compaction-free closing of the seed trench in wet, hard or sod conditions. With soil firmed around the seed from each side and the surface layer loosened, crops emerge sooner and planting can be done at the proper depth, even in wetter conditions, without fear of crushed soil above the seed preventing emergence. Pictures above illustrate the difference between the seed trench after the Martin Spading-Closing wheel set passes on the left, compared to the seed trench after the regular closing wheel set passes on the right. SPECIFIC ADVANTAGES • Speeds up warming of the row area • Closing wheel arm pressure can be greatly reduced • Seed trench is closed in the most severe conditions • Seed depth does not have to be raised to insure emergence • Soil above the seed is loose and slightly mounded allowing quicker emergence in a compaction-free environment • Sidewall compaction is greatly reduced MarTin PlanTing aTTaCHMenTs Available for John Deere, Kinze, White, Case-IH & Great Plains SCW1341 Closing Wheels • 3/8” thick, 13” diameter right and left toothed steel wheels with diamond shaped points • Cast hubs • Adaptor axles • For planters with roll-pin at- tached hubs: Deere 7000 & 7100 series, early Kinze series planters • Two 17mm I.D. bearings SCW1343 Closing Wheels • 3/8” thick, 13” diameter right and left toothed steel wheels with diamond shaped points • Cast hubs • For Deere 7200-7300 series planters • Two 17mm I.D. bearings SCW1344 Closing Wheels • 3/8” thick, 13” diameter right and left toothed steel wheels with diamond shaped points • Cast hubs • For planters with bolt-on hubs: Deere 1700 series, Kinze & White 6000 & 8000 series planters • Single 2-row 5/8” I.D. ball bearing Planter Spading Closing Wheels SCW1541 Closing Wheels • 3/8” thick, 15” diameter right or left toothed steel wheel with diamond shaped points • Cast hub • Adaptor axle • For planters with roll-pin at- tached hubs: Deere 7000 & 7100 series and early Kinze planters • Two 17mm I.D. bearings SCW1543 Closing Wheels • 3/8” thick, 15” diameter right or left toothed steel wheel with diamond shaped points • Cast hub • For Deere 7200 & 7300 series planters • Two 17mm I.D. bearings SCW1544 Closing Wheels • 3/8” thick, 15” diameter right or left toothed steel wheel with diamond shaped points • Cast hub • For planters with bolt-on hubs: Deere1700 series, Kinze and White 6000 & 8000 series planters • Single 2-row 5/8” I.D. ball bearing • Bolts to John Deere or Kinze closing wheel frame with bolt-on closing wheels. • Lowers the closing wheels so the frame runs level. • Designed for paired 13” spading closing wheels when used in loose soils DK-01 ITDSCW Martin Planter Spading Closing Wheels Product ID Vendor ID Description Price MRT001341 BSCW1341 13” double closing wheel set, John Deere and Kinze planters with roll pin attached closing wheels, water pump bearing $243.00 MRT001343 BSCW1343 13” double closing wheel set, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) and Great Plains 6030, 17mm bearing $230.00 MRT001344 BSCW1344 13” double closing wheel set, John Deere, Kinze, White, Great Plains planters with bolt-on closing wheels, 5/8” bearing $230.00 MRT101541 BSCW1541SL 15” single closing wheel, John Deere and Kinze planters with roll pin attached closing wheels, LH, water pump bearing $130.50 MRT201541 BSCW1541SR 15” single closing wheel, John Deere and Kinze planters with roll pin attached closing wheels, RH, water pump bearing $130.50 MRT101543 BSCW1543SL 15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) GP 6030, LH, 17mm bearing $124.00 MRT201543 BSCW1543SR 15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) GP 6030, RH, 17mm bearing $124.00 MRT101544 BSCW1544SL 15” single closing wheel, John Deere, Kinze, White, Great Plains planters with bolt-on closing wheels, LH, 5/8” bearing $124.00 MRT201544 BSCW1544SR 15” single closing wheel, John Deere, Kinze, White, Great Plains planters with bolt-on closing wheels, RH, 5/8” bearing $124.00 Martin Planter Spading Closing Wheels Options Product ID Vendor ID Description Price MRT004191 DK-01 Drop down kit. Bolts to John Deere or Kinze closing wheel frame with bolt-on 13” spading closing wheels. Lowers the closing wheels so the frame runs level. $21.00 MRT003149 ITDSCWSET Internal deflectors (scrapers) for spading closing wheels. Reduces buildup of mud and residue to insure fractured soil is placed evenly over seed trench. $27.00 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.20 Case-IH Planter White Planter Advantages: • Double 3/8” thick, 13” diameter, left & right toothed steel wheels with diamond shaped points • Cast hubs with single 2-row ball bearing • Left & right angled brackets • Does not change planter’s overall length • 9” diameter toothed steel wheels & ball bearing hubs • Replaces offset closing disk on Case IH planters • Also fit JD & Kinze shallow closing systems MarTin PlanTing aTTaCHMenTs Planter Spading Closing Wheels SCW514 & SCW614 Double Closing Wheel Sets. These closing wheels can be added to the White 5000 or 6000 series planters that have single closing tires. The Martin Spading-Closing Wheels enhance closing of the seed trench while the smooth wheel gently firms the surface. Moist soil is moved toward the seed at seeding depth even in wet, hard or sod conditions. In wet condi- tions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they rotate up out of the soil. Other benefits include: • Closing wheel arm pressure can be greatly reduced • Seed trench is closed in the most severe conditions • Seeding depth does not have to be raised to insure emergence • Soil above the seed is loose allowing quicker emergence in a compaction free environment • Sidewall compaction is eliminated SCW899 BSCW51 BSCW61 Martin Drill Spading Closing Wheels Product ID Vendor ID Description Price MRT175404 BSCW75B4L 13” single spiked closing wheel, John Deere 750, 1850 drill, LH $125.00 MRT275404 BSCW75B4R 13” single spiked closing wheel, John Deere 750, 1850 drill, RH $125.00 MRT075104 BSCW75B4D-20R 13” single 20 pt. dimple closing wheel, John Deere 750, 1850, RH $122.00 MRT075204 BSCW75B4D-20L 13” single 20 pt. dimple closing wheel, John Deere 750, 1850, LH $122.00 MRT115604 BSCW1564L 13” single spiked closing wheel, John Deere 1560-1890 drills, LH $86.00 MRT215604 BSCW1564R 13” single spiked closing wheel, John Deere 1560-1890 drills, RH $86.00 MRT315604 BSCW1564D-20 13” single 20 pt. dimple closing wheel, John Deere 1560-1890 drills $83.00 Martin Planter Spading Closing Wheels Product ID Vendor ID Description Price MRT005104 BSCW514 13” double closing wheel set, White 5100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame $268.00 MRT006104 BSCW614 13” double closing wheel set, White 6100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame $268.00 MRT089903 BSCW899 9” double closing wheel set, Case IH planters and John Deere & Kinze planters with shallow closing attachments, replaces OEM covering discs $120.00 SCW75B4 Spading-Closing Wheel SCW75B4D 20 Point Dimple-Closing Wheel SCW1564 Spading-Closing Wheel SCW1564D 20 Point Dimple-Closing Wheel VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 21 Advantages include: • It allows the depth gauge wheels to follow the ground terrain allowing the unit to travel smoothly in all field conditions • More equal compaction on either side of the disk enhances seed to soil contact and equal emergence • Consistent seed depth control • Longer seed disk life in rocky conditions • Life of depth gauge wheels is greatly extended in all rocky and no-till conditions • Less bearing failure on depth gauge wheels • Includes installation hardware The Depth-A-Matic can easily be installed on your planter in approximately ten minutes per row. Simply remove one depth control wheel, remove snap ring from pin, remove pin that holds depth stop and remove old depth stop. Then install the Depth-A-Matic in its place, with our replacement bolt and locknut. John Deere 7000 7100 John Deere 7200 7300 1700 Rocker dePTH-a-MaTiC QuiCK CranK TrasHWHiPPer adjusTer Provides the Opportunity to Raise Height of Residue Managers an Additional 3/4” For Factory Installed, Pin-Adjust, Yetter Residue Managers on John Deere Planters Will only work with Yetter model #2967-15 fixed row cleaners Depth-A-Matic Product ID Description Price DAM001000 Depth-A-Matic, John Deere 7000, 7100; Kinze (except Kinze 3000 series) and New Idea planters $32.95 DAM002000 Depth-A-Matic, John Deere 7200, 7300 and 1700 series (except John Deere XP row units) $41.95 Depth-A-Matic Replacement Parts DAM003100 Rocker, for Depth-A-Matic $13.95 DAM003200 Roll pin, for Depth-A-Matic $0.50 Quick Crank Trashwhipper Adjuster Product ID Description Price PLT130602 Quick Crank Trashwhipper Adjuster $99.00 PLT130601 Crank Handle $20.00 Features: • Converts fixed pin-adjust residue managers to screw-adjust • Height adjustments can be made in seconds while standing in front of the planter • Extremely quick – approximately 60 seconds to adjust 12 rows • Allows adjustments to be made easily in the field as conditions change • Installation requires no cutting or welding of original residue managers or on the planter • Provides the opportunity to raise height of residue managers an additional 3/4” • Powder coat painted PLT130601 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.22 Are you ready for planting? Where will you be when the planter runs out of seed? Eliminate the frustration of the uncertain. You can save time and steps during the busy planting season by installing the Seed Level Indicator on one or more of your planter seed boxes. It’s easy and will save you time. Product ID Description Price PLT100500 Seed Level Indicator $ 129.95 seed leVel indiCaTor one WrenCH Works in Seconds - One Hand, One Motion The unique design of the new One WrenchTM allows you to adjust the depth of the John Deere 750 & 1850 Grain Drills with only one hand in one quick motion. The design incorporates several pads that are used to depress the locking pin of the adjusting plate. Upon releasing the locking pin you can adjust the grain drill to the desired depth. Patent No. 7249391 Product ID Description Price DRL010001 One Wrench $59.95 Adjusts John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One Wrench Conversion kit includes: 1. Seed block for finger pick-up seed box 2. Metric bolt and nut 3. Detailed instructions for complete installation Conversion Kit to Adapt to Kinze Brush-Type Seed Meter to Fit a John Deere 7200, 7300 and 1700 Series Finger Pick-up Seed Box Kinze brusH MeTer adaPTer Product ID Description Price PLT000100 Adapter kit, to install Kinze brush meter on John Deere 7200, 7300 and 1700 series planter $9.95 Note: Will not work on Kinze Brush Meters manufactured after July 2010 because the shaft is now hardened and very difficult to modify. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 23 Original, Field Tested And Proven Quick-Adjusting Pivot Arm Replacement Kits With O-Ring Grease Seals PlanTer PiVoT arM KiTs All pivot arm kits include: • 2- Heavy duty cast pivot arms with o-ring grooves • 2- Counterbored, heat-treated bushings with a grease groove • 4- O-rings for pivot arms • 2- Key handle wrenches used for adjustment • 2- 7-gauge flat washers used for installation • 10- 14 gauge shim washers used for adjustment • Installation instructions Note: Bolts for planter re-installation not included. V-Closing WHeel ConVersion braCKeT White PlanterCase-IH Planter V-Closing Wheel Bracket, White 5000 & 6000 Series Planters Product ID Description Price PLT125001 Bracket kit, to convert planter to v-closing wheels Includes shim washers for spacing wheels to desired width Will only fit planters if H-bracket arm is straight and down pressure springs are on the inside. $39.95 V-Closing Wheel Bracket, Case-IH 800 & 900 Series Planters PLT125101 Bracket kit, to convert planter to v-closing wheels Includes shim washers for spacing wheels to desired width $79.95 Planters with Roll Pin Gauge Wheels Product ID Description Price PLT110120 Pivot Arm Kit, John Deere 7000, 7100, 7200, 7300; Kinze 2000 series prior to 1993 Pivot arm mounts to planter on 1” diameter pin $75.95 Planters with Bolt-On Gauge Wheels Product ID Description Price PLT110100 Pivot Arm Kit, John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000 series 1993-1999 Pivot arm mounts to planter on 1” diameter pin. $75.95 PLT110115 Pivot Arm Kit, John Deere 1700 series with self-aligning bushing. Pivot arm mounts to planter with 16mm x 100mm bolt. John Deere’s self-aligning bushing is not re-used. Kit includes new threaded spindle, bolt and lock washer. Note: For XP row units must purchase 5/8” bolts for gauge wheels. $85.95 Planters with Set Screw Gauge Wheels Product ID Description Price PLT110140 Pivot Arm Kit, John Deere 7200, 7300 (1992 and newer), 1700 series Pivot arm mounts to planter on 1” diameter pin. $75.95 PLT110146 Pivot Arm Kit, John Deere 1700 series with self-aligning bushing Pivot arm mounts to planter with 16mm x 100mm bolt. John Deere’s self-aligning bushing is not re-used. Kit includes new threaded spindle, bolt and lock washer. $85.95 Pivot Arm Replacement Parts Product ID Description Price PLT110200 Pivot arm only, threaded, each $29.95 PLT110210 Pivot arm only, roll pin, each $29.95 PLT110220 Pivot arm only, set screw, each $29.95 PLT110180 Bearing Kit, includes 2 gauge wheel bearings, 5/8” x 3” bolts and lock washers $17.95 PLT110250 Bearing, 40mm, for gauge wheels $7.95 PLT110251 Counterbored bushing, each $5.95 PLT110254 O-ring, (2 required per arm) each $0.40 PLT110256 Shim washer, 14-gauge, each $0.30 PLT110257 Key handle wrench, without washer, each $3.75 PLT110264 Flat washer, 7-gauge, 1/2” ID, each $0.95 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.24 Parts Include: · New and improved bracket allows opportunity to offset the V-Closing wheels · Hardened hex step bushings that are replaceable; saves wear and tear on the bracket · Hardened 1” eccentric bushings to correct misalignment · Heavy duty down pressure spring · Cast “T” handle for quick adjustment of down pressure · Bolt and locknut for handle Update Your John Deere And Kinze Planter For Quick And Easy Down Pressure Adjustment S.I. Distributing offers a service to rebuild existing John Deere V-Closing wheel brackets. The old worn-out ears are cut off and new hex style ears are welded on while in a jig to insure proper alignment. Includes hex step bushings and new eccentric bushings. Rebuild Your OEM Closing Wheel Bracket Rebuilt John Deere Cast Bracket Rebuilt John Deere 7200, 7300 Bracket Closing WHeel braCKeTs White 6000 Series Bracket Closing Wheel Bracket Replacement Parts Product ID Description Price PLT120550 Eccentric bushing, for 1/8” ears, each $2.39 PLT120650 Eccentric bushing, for 1/4” hardened ears, each $5.95 PLT120660 Eccentric bushing, for hex style ears, each $3.79 PLT120661 Hex step bushing, each $1.69 PLT120750 T-handle, painted green, each $8.95 PLT120753 T-handle, painted black, each $8.95 PLT120751 Spring, each $7.95 White 6000 Series Rebuild Kit Product ID Description Price PLT120618 Rebuild Kit, White 6000 Series. Kit includes new bolt-on arms, eccentric bushings, hex bushings and hardware. $25.00 Closing Wheel Bracket Rebuild Service Product ID Description Price PLT120610 Rebuild John Deere 7200, 7300 closing wheel bracket $29.95 PLT120630 Rebuild John Deere 1700 Series cast closing wheel bracket $29.95 PLT120640 Rebuild Kinze closing wheel bracket with bolt-on closing wheels $29.95 Closing wheel bracket is sent to S.I. Distributing where the old worn-out ears are cut off and new hex style ears are welded on while in a jig to insure proper alignment. Price includes new eccentric bushings, hex step bushings and repainting. Closing Wheel Bracket Kits Product ID Description Price PLT120700 Closing Wheel Bracket, John Deere 7000, 7100 with roll pin attached wheels $59.95 PLT120710 Closing Wheel Bracket, Kinze 1993 and earlier with roll pin attached wheels $59.95 PLT120720 Closing Wheel Bracket, Kinze 1994 and newer with bolt-on wheels $59.95 PLT120730 Closing Wheel Bracket, John Deere 7000, 7100 converted to bolt- on wheels. Includes hardware kit to bolt wheels on bracket. $59.95 PLT120740 Closing Wheel Bracket, John Deere 7200, 7300, 1700 converted to bolt-on wheels. Includes hardware kit to bolt wheels on bracket. $59.95 Note: Bolts to install bracket on planter and closing wheels are not included VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 25 The problem: Seed coverage is the biggest problem in no till planting. It is not unusual to see no-till corn laying in an open seed trench only to germinate if and when rain occurs to help put soil around the seed. Since there is no loose soil to speak of and the ground tends to be more moist in no-till, the seed trench doesn’t close behind the opener. Many researchers have suggested the double, angled-type of press wheels as the best all-around answer to the seed coverage problem. Cast Iron Angled Closing Wheels that squeeze the seed trench together are definitely superior to the standard type, especially in reduced tillage. The extra weight of the cast iron and the narrow rolling edge (obtainable only by a solid cast wheel) squeeze the seed trench together for good soil to seed contact. The solution: • Better plant emergence • More even plant population • Helps retain valuable moisture for faster germination • Can be used in conventional tillage with proper spring tension • Wheels are made to interchange easily with original press wheels on Max-Emerge, Kinze, New Idea and Yetter planters • The precision sealed bearing can be easily changed with removable snap ring • The wheel is made of rugged, thick, cast iron • Weigh 45 pounds per row • One year workmanship guarantee on unit Successful No Till Planting Depends On The Closing Of The Seed Trench Pushing the Seed Trench Together CasT-iron Closing WHeels Wheel Diameter: 13” Material: Ductile iron Advantages vs. regular cast wheels • Lighter weight • Less compaction • Fins will break up clods and fine up the topsoil • Better in dry, no-till conditions Close-n-Till CasT WHeels Comparison Weight of Closing Wheels (each) Rubber Wheel ......................................... 3.5 lbs. 13” Martin Spike Wheel .....................12.0 lbs. 15” Martin Spike Wheel .....................14.5 lbs. Finger-Till Wheel ..................................16.2 lbs. Close-N-Till Wheel ...............................17.3 lbs. Regular Cast Iron Wheel ....................23.0 lbs. • More aggressive • Reduces sidewall compaction • Lightly tills the soil • Faster seed emergence • 15” in diameter • Better in wet, no-till conditions finger-Till CasT WHeels 12” in Diameter Cast Iron Closing Wheels Product ID Description Price PLT110000 Cast iron closing wheel, John Deere 7000, 7100; Kinze 1993 & prior, each Water pump style bearing $60.00 PLT110010 Cast iron closing wheel, John Deere 7200, 7300, 1700 series, each Bearing ID = 16.95mm $60.00 PLT110020 Cast iron closing wheel, John Deere 1700 series, Kinze 1994 & newer, White 6000, 8000, 9000 series, each Bearing ID = 5/8” $60.00 Cast Iron Closing Wheel Replacement Parts Product ID Description Price PLT110001 Bearing, for John Deere 7000, 7100; Kinze 1993 & prior, each Water pump style bearing; one bearing per wheel $16.00 PLT110011 Bearing, outside, for John Deere 7200, 7300, 1700 series, each Bearing ID = 16.95mm; one outside & one inside bearing per wheel $7.50 PLT110022 Bearing, inside, for John Deere 7200, 7300, 1700 series, each Bearing ID = 16.95mm; one outside & one inside bearing per wheel $10.95 PLT110021 Bearing, for Kinze 1994 & newer, White 6000, 8000, 9000 series, each Bearing ID = 5/8”; two bearings per wheel $9.75 PLT110002 Snap ring, for John Deere 7000, 7100; Kinze 1993 & prior, each $1.00 Close-N-Till Cast Wheels Product ID Description Price PLT110030 Close-N-Till Wheel, 5/8” bearing, for John Deere 1700 series, Kinze 1994 & newer, White 6000, 8000, 9000 series planters that use 5/8” bolt to attach closing wheels. $73.00 PLT110040 Close-N-Till Wheel, 17mm bearing, for John Deere 7200, 7300, 1700 series planter with a 16.95 mm threaded spindle on closing wheel frame. $73.00 PLT110050 Close-N-Till Wheel, water pump bearing, for John Deere 7000, 7100 series, Kinze 1993 & prior planters where closing wheels are attached with roll pin. $73.00 Finger-Till Cast Wheels Product ID Description Price PLT110060 Close-N-Till Wheel, 5/8” bearing, for John Deere 1700 series, Kinze 1994 & newer, White 6000, 8000, 9000 series planters that use 5/8” bolt to attach closing wheels. $91.00 PLT110070 Close-N-Till Wheel, 17mm bearing, for John Deere 7200, 7300, 1700 series planter with a 16.95 mm threaded spindle on closing wheel frame. $91.00 PLT110080 Close-N-Till Wheel, water pump bearing, for John Deere 7000, 7100 series, Kinze 1993 & prior planters where closing wheels are attached with roll pin. $91.00 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.26 aCre Plus seed box ToPPer Save time, labor and money. The Air Design scraper will outlast and outwear standard cast scrapers and they can’t flip over and fall off. The scraper features a special tungsten carbide cutting edge. You’ll get superior performance and reduce tedious replacement time. Includes hardware for installation. • OEM color matched plastic construction • Plastic mold injection process insures better fit with one-piece snap-on design • No modification to original seed box, use existing seed box lid • Adds one bushel to seed box capacity - Plant more acres between fills • Fit John Deere 7200, 7300 (1995 and newer), & John Deere 1700 series poly boxes • Fit Kinze 3000 series poly boxes (2001 and newer) • Not recommended for fiberglass constructed boxes • Adds 7-1/4” to height of planter seed box The AIR DESIGN scrapers feature an extremely simple design with a special tungsten carbide edge. The tungsten carbide provides outstanding abrasion resistance along with toughness to give superior, long-lasting performance and reduces the need for replacement. air design PlanTer sCraPers air design drill sCraPers Kinze John Deere • Aggressive cleaning action • Enhances seed depth placement accuracy • Easy to install • No drilling or other hardware required Tungsten carbide edge will outlast OEM steel scrapers by a factor of 100 to 1. Tungsten carbide edge will outlast OEM steel scrapers by a factor of 100 to 1. Product ID Description Price PDM030000 Acre Plus, John Deere 7200, 7300 poly boxes (1995 & newer), 1700 series $29.95 PDM031000 Acre Plus, Kinze 3000 series poly boxes (2001 & newer) $29.95 Product ID Description Price ADC210601 Scraper kit, John Deere 1890, 1895, right disc $38.95 ADC210602 Scraper kit, John Deere 1890, 1895, left disc $38.95 ADC210750 Scraper kit, Krause, all $22.95 ADC210801 Scraper kit, Case-IH SDX, right disc $38.95 ADC210802 Scraper kit, Case-IH SDX, left disc $38.95 ADC210950 Scrapter kit, Great Plains 00HD opener $24.95 ADC700000 Scraper kit, Case-IH 620, 6200 $19.95 ADC700200 Scraper kit, Case-IH 5400, 5500, left leading disc $13.95 ADC700300 Scraper kit, Case-IH 5400, 5500, right leading disc $13.95 ADC800000 Scraper kit, John Deere 455, 730, 1060, 8300, 9350 $19.95 Product ID Description Price ADC210490 Scraper kit, outside, John Deere 7000, 7100, Kinze. 1-piece design. Includes 2 scraper/arm assemblies and 1 spring. No modifications or holes to drill. $34.95 ADC210500 Scraper kit, outside, John Deere 7000, 7100, Kinze. 2-piece design. Includes 2 scrapers, 2 arms and 1 spring. No modifications or holes to drill. $33.75 ADC210880 Scraper kit, outside, John Deere 7200, 7300, 1700-30, 1750-80. 1-piece design. Includes 2 scraper/arm assemblies and 1 spring. No modifications required. $34.95 ADC210510 Scraper kit, outside, John Deere 7200, 7300, 1700-30, 1750-80. 2-piece design. Includes 2 scrapers. Reuse original John Deere arms and spring. No modifications required. $22.95 ADC210530 Scraper kit, outside, White 6000, 8000 series. Includes 2 scrapers, 2 adapter plates and 2 shims. Reuse original White arms. $24.95 ADC210560 Scraper kit, outside, Case-IH 800, 900, 1200 series. Includes 2 scrapers. Reuse original Case-IH arms and rivets. $28.95 ADC210670 Scraper kit, inside, Case-IH 955, 1200, left leading disc $22.95 ADC210680 Scraper kit, inside, Case-IH 955, 1200, right leading disc $22.95 ADC210700 Scraper kit, inside, John Deere 7200, 7300, 1700 series; non-cast shank $31.95 ADC210740 Scraper kit, inside, John Deere 7200, 7300, 1700 series; cast shank $31.95 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 27 Marker Weight For No-Till SURE MARK is a 12-1/2 pound weight that simply bolts on the dish of your marker disk. The additional weight of SURE MARK will assist the disk to cut a much deeper furrow in No-Till planting. For extremely hard No-Till conditions, another weight can be added. When placing an order please measure the hub bolt pattern from center-to-center of each bolt and the distance that the hub extends beyond the marker blade. Longer bolts for installation are not included. Description Price Sure Mark Please specify make, model and hub bolt pattern when ordering. $29.95 sure MarK MarKer WeigHT • Prevents rocks from bending planter units and twisting depth control arms • Reduces bending and breaking of depth gauge wheels • Helps prevent plugging of rocks and residue between depth gauge wheel and planter drive wheel • Made of heavy gauge steel • Includes all mounting hardware Product ID Description Price PLT130500 Gauge wheel cover, each $12.95 For John Deere, Kinze and White Planters gauge WHeel CoVer • Keeps your planter V-Closing wheels free of old stalks, lumps of soil and other field debris • Improves planting results • Saves time and money on maintenance • For all John Deere, Kinze and White planters • Bolts easily between the closing wheels • Includes installation hardware TrasH guard Product ID Description Price PLT126000 Trash guard kit, John Deere, Kinze and White planters $9.95 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.28 This Package Equals or Exceeds Competitive Designs in Down Force in the Normal Working Range. • Variable settings • Maximum down pressure up to 700 lbs. • Will fit all Kinze and John Deere planters with steel (not cast) parallel linkage arms providing there is enough room on the inside of the arms • On John Deere 7200, 7300 row units, the holes in the parallel linkage arms will need to be enlarged. For John Deere 7000, 7100 and Kinze Planters Benefits include: • Replaces worn bushings in parallel linkage for John Deere 7000, 7100 and Kinze Planters • Oversized bushings last up to four times longer • Special designed bolts have a shoulder so the bushings don’t wear on the bolt threads • No need to replace parallel linkage because holes are enlarged to accept the new bushings • Insures a precise fit to eliminate movement between the bushing and the bolt doWn Pressure sPring PaCKage Parallel linKage rebuild KiTs • For John Deere 7000, 7100 and Kinze planters must drill out parallel linkage to 1-3/32”. • For John Deere 7200, 7300, 1700 series planters no drilling is required. Kit includes same size bushing as original. Kit includes: • 8 oversized bushings • 8 special shouldered grade 5 bolts • 8 grade 5 locknuts Each package includes: 4 - Detent pins 4 - Anchors 4 - Heavy duty down pressure springs Parallel Linkage Rebuild Kit Product ID Description Price PLT130100 Parallel linkage rebuild kit, per row $29.95 Note: Will not work with parallel linkage mounted attachments Down Pressure Spring Kit Product ID Description Price PLT141000 Down pressure spring kit, per row $79.00 PLT141001 Down pressure spring kit with plate, per row Note: The spring kit with plate is for planter row units that currently do not have a plate installed to hold the u-bolts square and keep the parallel linkage from twisting. $99.00 Down Pressure Spring Kit Components Product ID Description Price PLT141010 Detent pin, 4 per kit, each $3.89 PLT141011 Anchor, 4 per kit, each $9.75 PLT141012 Spring, 4 per kit, each $7.25 Parallel Linkage Rebuild Kit Components Product ID Description Price PLT130101 Bushing, 8 per kit, each $1.95 PLT130102 Bolt, 5/8” x 1-3/4”, 6 per kit, each $1.90 PLT130103 Bolt, 5/8” x 2-1/4”, 2 per kit, each $2.10 PLT130104 Nut, 5/8” lock, 8 per kit, each $0.40 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 29 Population Monitor for Planters and Grain Drills The M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. Using an Intel® microprocessor the M3 monitors speed, area, population, hopper levels, limit switch status, seed spacing, and row failure to keep the operator informed of the current status of the planter or drill. The M3 has two separate sets of setup parameters that may be entered and retained, eliminating the need to re-enter values when switching planters or drills. Every feature of the M3 has been designed to be as simple to operate as possible, thereby eliminating confusion and unnecessary down time in the field. Each Kits Includes: • M3 Monitor Console • Power Cable • Cab Harness • Planter or Grain Drill Harness • DICKEY-john® High- Rate Seed Sensors • New Seed Tubes for Planters • Seed Tube Adapters for Drills (if required) • Instruction Manual M3 MoniTor sysTeM M3 Monitor Drill Kits Product ID Description Price AGT30040102 M3 Kit, 4-row drill, rigid, 10-20’ $1,209.00 AGT30040202 M3 Kit, 4-row drill, folding, 20-25’ $1,375.00 AGT30040302 M3 Kit, 4-row drill, folding, 30’ $1,430.00 AGT30040402 M3 Kit, 4-row drill, tandem, 10-15’ $1,485.00 AGT30060102 M3 Kit, 6-row drill, rigid, 10-20’ $1,650.00 AGT30060302 M3 Kit, 6-row drill, 3-fold, 30’ $1,650.00 AGT30080102 M3 Kit, 8-row drill, rigid, 10-20’ $1,925.00 AGT30080302 M3 Kit, 8-row drill, front fold, 30’ $2,035.00 AGT30080402 M3 Kit, 8-row drill, tandem, 10-15’ $2,035.00 AGT30120102 M3 Kit, 12-row drill, rigid, 10-20’ $2,475.00 AGT30160202 M3 Kit, 16-row drill, folding, 20-25’ $3,135.00 AGT30160203 M3 Kit, 16-row drill, folding, 30’ $3,135.00 M3 Monitor Planter Kits Product ID Description Price AGT30045051 M3 Kit, 4-row planter, rigid, John Deere 7000, 7100, Kinze $1,375.00 AGT30045052 M3 Kit, 4-row planter, rigid, John Deere 7200, 7300, 1700 series $1,375.00 AGT30065051 M3 Kit, 6-row planter, rigid, John Deere 7000, 7100, Kinze $1,650.00 AGT30065052 M3 Kit, 6-row planter, rigid, John Deere 7200, 7300, 1700 series $1,650.00 AGT30085051 M3 Kit, 8-row planter, rigid, John Deere 7000, 7100, Kinze $1,925.00 AGT30085052 M3 Kit, 8-row planter, rigid, John Deere 7200, 7300, 1700 series $1,925.00 AGT30085251 M3 Kit, 8-row planter, rear fold, John Deere 7000, 7100, Kinze $2,035.00 AGT30085252 M3 Kit, 8-row planter, rear fold, John Deere 7200, 7300, 1700 series $2,035.00 AGT30085351 M3 Kit, 8-row planter, front fold, John Deere 7000, 7100, Kinze $2,035.00 AGT30085352 M3 Kit, 8-row planter, front fold, John Deere 7200, 7300, 1700 series $2,035.00 AGT30125051 M3 Kit, 12-row planter, rigid, John Deere 7000, 7100, Kinze $2,475.00 AGT30125052 M3 Kit, 12-row planter, rigid, John Deere 7200, 7300, 1700 series $2,475.00 AGT30125251 M3 Kit, 12-row planter, rear fold, John Deere 7000, 7100, Kinze $2,585.00 AGT30125252 M3 Kit, 12-row planter, rear fold, John Deere 7200, 7300, 1700 series $2,585.00 AGT30125351 M3 Kit, 12-row planter, front fold, John Deere 7000, 7100, Kinze $2,585.00 AGT30125352 M3 Kit, 12-row planter, front fold, John Deere 7200, 7300, 1700 series $2,585.00 AGT30165051 M3 Kit, 16-row planter, rigid, John Deere 7000, 7100, Kinze $3,025.00 AGT30165052 M3 Kit, 16-row planter, rigid, John Deere 7200, 7300, 1700 series $3,025.00 AGT30165251 M3 Kit, 16-row planter, rear fold, John Deere 7000, 7100, Kinze $3,135.00 AGT30165252 M3 Kit, 16-row planter, rear fold, John Deere 7200, 7300, 1700 series $3,135.00 AGT30165351 M3 Kit, 16-row planter, front fold, John Deere 7000, 7100, Kinze $3,135.00 AGT30165352 M3 Kit, 16-row planter, front fold, John Deere 7200, 7300, 1700 series $3,135.00 M3 Monitor Accessories Product ID Description Price AGT10003389 Sensor, drill, Dickey-john, high-rate $101.95 AGT10003795 Power cable, M3 monitor, 18’ $28.00 AGT10005800 Cab cable, M3 monitor, Computer-Trak pinout, 12’ $85.00 AGT10006552 Adapter kit, John Deere drill seed tubes $20.00 AGT10006518 Limit switch kit (disables acre counter when implement is raised) $90.00 AGT10006525 Gear tooth sensor kit, for RPM or ground speed sensing $120.00 AGT10009000 Cab cable, M3 monitor, DICKEY-john pinout, 12’ $85.00 AGT1050300001 M3 console, includes DICKEY-john cab cable $925.00 AGT1050300002 M3 console, includes Computer-Trak cab cable $925.00 MTS901425 Astro 5 GPS Speed Sensor, 5Hz update rate $467.00 MTS901413 Astro II GPS Speed Sensor, 1Hz update rate $347.00 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.30 • Frees up the front of the planter for other attachments • Allows for split applications of two different types of fertilizer • No sideways movement of residue • High pressure assures excellent placement of fertilizer • Mounts directly on the planter unit – no extra tool bars required • Low maintenance and low draft • 13” double-beveled coulter blade • Applies fertilizer approximately 3” to either side of the row • Trail-Jet requires a constant pressure pump; not a squeeze pump Available For: John Deere Series 7000-7300 1700 Kinze Series 2000 3000 Case-IH Series 800 900 1200 White Series 6000 8000 Applies Liquid Fertilizer Behind the Planter • Designed to keep insecticide in place during windy planting conditions • Soft flexible material will not affect flow pattern of insecticide • Uses existing hardware to mount to bander • Available for Kinze, John Deere, and models using insecticide bander as shown in picture Product ID Description Price PDM050000 Insecticide skirt $5.50 Trail-jeT ferTilizer oPener inseCTiCide sKirT Trail-Jet Fertilizer Opener Product ID Description Price TJT001000 Trail-Jet, Monosem units $259.00 TJT001200 Trail-Jet, Case-IH 1200 series; Will not fit 1220 $249.00 TJT003000 Trail-Jet, Kinze 3000 series $249.00 TJT006000 Trail-Jet, White 6000 series $249.00 TJT007000 Trail-Jet, John Deere 7000, 7100 series, Kinze 2000 series $235.00 TJT007200 Trail-Jet, John Deere 7200, 7300, 1700 series with MaxEmerge 2 row units $235.00 TJT007500 Trail-Jet, John Deere 1700 series with MaxEmerge Plus row units $249.00 TJT007600 Trail-Jet, John Deere 1700 series with MaxEmerge XP row units $251.00 TJT007700 Trail-Jet, John Deere 1700 series with Pro-Series XP row units $251.00 TJT008000 Trail-Jet, Case-IH 800, 900 series $269.00 TJT008100 Trail-Jet, White 8000 series $249.00 Note: Price is per row and does not include pump or hoses. Nozzles are sold separately. Trail-Jet Nozzles Product ID Description Price TJT830002 Stainless steel nozzle, 5 gallons per acre $15.50 TJT830003 Stainless steel nozzle, 10 gallons per acre $15.50 TJT830004 Stainless steel nozzle, 15 gallons per acre $15.50 TJT830005 Stainless steel nozzle, 20 gallons per acre $15.50 TJT830006 Stainless steel nozzle, 25 gallons per acre $15.50 TJT830008 Stainless steel nozzle, 30 gallons per acre $15.50 TJT830010 Stainless steel nozzle, 40 gallons per acre $15.50 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 31 sHield ag drill disCs These Extreme Conditions Discs are more than 17% thicker to last longer in dry and abrasive conditions, and they are more than 36% stronger to resist breakage in the toughest ground. These drill discs are made from high quality chrome-boron steel for toughness and improved ability to penetrate, scour and self-clean. Extreme Conditions Drill Discs • Extreme conditions discs are made of earth-metal, chrome-boron steel • Built for toughness; improved ability to penetrate, scour and self-clean • Available as blade only, single disc assembly and boxed sets of two disc assemblies • 205 series bearing with triple-lip seals on both sides • 3.5mm blades are 17% thicker than 3.0mm OEM blades • Last longer in dry and abrasive conditions • 36% stronger to resist breakage in the toughest ground APL135050 APL135052 APL150050 APL135000 APL180000 ShieldAg Drill Discs Product ID Description OEM ID Diam. Bearing Thick. Dust Cover Shims Smooth Notched Qty. Price APL135050 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 107-130S 107-133S 107-135S 107-138S 13.5” 205, 5/8” 3.5mm x 1 $38.00 APL135051 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 13.5” 205, 5/8” 3.5mm 2 6 x 2 $75.00 APL135052 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 13.5” 205, 5/8” 3.5mm x 1 $42.00 APL135053 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 13.5” 205, 5/8” 3.5mm 2 6 x 2 $83.00 APL150050 Drill disc assembly, Great Plains HD, 15 & 25 series drills Yield Pro planters 404-072S 404-121S 15” 205, 5/8” 4mm x 1 $46.00 APL150051 Drill disc assembly, Great Plains HD, 15 & 25 series drills Yield Pro planters 15” 205, 5/8” 4mm 2 6 x 2 $91.00 APL135000 Drill disc blade, John Deere 450, 455, 515 520, 1520, 8100, 8200, 8250, 8300, 8350, 8500, 8550, 9400, 9450 conventional drills; 730, 770, 780, 1060 air seeders N164594 N283805 13.5” none 3.5mm x 1 $18.00 APL180000 Drill disc blade, John Deere 750, 1560, 1590, 1690, 1850, 1860, 1890, 1895, 1990 Note: This is a double beveled blade that improves penetration. N214190 N283804 18” none 5mm x 1 $44.00 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.32 Firming Wheels Compared Wheel Information Tire Design Profile Maximum Width (Inches) Durometer (compound hardness) Wheel Design Characteristics Ability to Flex Within Seed Slot John Deere Part Number AN281359 0.982 82 Rubber tire with 2 steel wheel halves No John Deere Part Number AN282296 0.831 80 Rubber tire with 2 plastic wheel halves No Needham Ag V8 Firming Wheel 0.596 95 Flexible rubber wheel design with tapered shape to match seed slot Yes Product ID Description Price DRL400001 Needham AG V8 firming wheel,John Deere drill $39.95 needHaM ag V8 firMing WHeel Needham Ag Technologies, LLC Designed a New and Improved Seed Firming Wheel Called V8. Features: • John Deere’s single disc opener creates a seed slot that is almost vertical on the disc side with an angled sidewall on the opposite boot side • John Deere’s firming wheel is too wide to fit down into the angled seed slot, especially in no- till conditions • Needham Ag V8 firming wheel is designed to closely match the profile of the seed slot • Needham Ag V8 firming wheel pushes the seed into the bottom of the seed slot for uniform access to soil moisture • Needham Ag V8 firming wheel promotes more even seed emergence, even in low soil moisture conditions • Needham Ag V8 firming wheel incorporates a 5203 bearing for longer service life • Needham Ag V8 firming wheel includes mounting bolt, lock nut, spacer and installation instructions • Fit John Deere 750, 752, 1560, 1590, 1850, 1860, 1890 and rear 2 gangs on 1895 www.needhamag.com • Start applying anhydrous and 28% fertilizer when crop is smaller. • Drive faster without covering corn. • Moves ground where knife ran for better sealing. • Prevents loss of anhydrous and 28% fertilizer. • Prevents the possibility of open slots in dry conditions. • Purchasing without discs and using your planter’s worn seed discs makes it economical. • Independent arms reduce clogging and dragging of residue. • Powder coat painted frames. • No springs; simple and low maintenance. • Only needs greased every 200-300 acres and before storing for the season. nH3 disC sealers Needham Ag V8 wheel installed on John Deere drill John Deere 1” firming wheel is too wide to fit down within the seed slot Needham Ag V8 wheel is down within the seed slot NH3 Disc Sealers Product ID Description Price GRB100000 Disc Sealer, straight shank, 2” wide $199.00 GRB200000 Disc Sealer, straight shank, 1” wide $199.00 GRB300000 Disc Sealer, coiled shank $199.00 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 33 Individual row unit down pressure is available on the Case SDX series and this feature is particularly useful when setting up their no-till drills. Often the amount of down pressure required to pen- etrate the soil is higher behind tractor and mid-cart wheel tracks, so additional force can be added to these individual units using the pin hole configuration illustrated in the left photo. In the past, operators of John Deere single disc seeders have not had the luxury of this adjustment and frequently the amount of down pressure in wheel tracks is not high enough to ensure consistent soil engagement. If down pressure is elevated to achieve penetration within the wheel tracks, then units not within previous wheel tracks usually have excessive down pressure. This is a concern because it commonly results in sidewall compaction. Needham Ag Technologies, LLC is proud to offer the new Spring Compression Spacers for John Deere single disc seeders. They are easily installed within the compression spring hous- ing by loosening the tension on the bolt and installing the spacer. Depend- ing on the width of the seeder, the size of the tires on the cart and tractor and the row spacing, 4-8 of these spacers may be required for a John Deere drill or seeder. Each spacer provides around 70 lb of additional down force. Product ID Product Description Price DRL400100 John Deere 750, 1850 $26.25 DRL400200 John Deere 1560, 1590, 1860, 1890, 1895 $26.25 sPring CoMPression sPaCers For John Deere Single Disc Seeders joHn deere seed booTs DRL280446 DRL280447 DRL282788 DRL282789 DRL283432 DRL283433 John Deere Drill Seed Boots Product ID Product Description Price DRL280446 Seed Boot, John Deere 750, 1850, right hand $26.75 DRL280447 Seed Boot, John Deere 750, 1850, left hand $26.75 DRL282788 Seed Boot, John Deere 1560, 1565, 1860, top right hand $15.50 DRL282789 Seed Boot, John Deere 1560, 1565, 1860, top left hand $15.50 DRL283432 Seed Boot, John Deere 1560, 1565, 1860, bottom right hand $15.00 DRL283433 Seed Boot, John Deere 1560, 1565, 1860, bottom left hand $15.00 DRL283730 Seed Boot, John Deere 1560, 1590, 1890, 1-piece right hand For drills that have been converted to the 1-piece seed boot $33.00 DRL283731 Seed Boot, John Deere 1560, 1590, 1890, 1-piece left hand For drills that have been converted to the 1-piece seed boot $33.00 DRL283730 DRL283731 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.34 KeeTon seed firMers Keeton Seed Firmer Planter Application Guide Make Models Installation Options Notes Tail Options Product ID Price Case-IH 400, 500 800, 900 5400, 5500 Seed Boot Mount Mounts to seed boot. Also fits 5400 and 5500 Soybean Special drills Will NOT fit seed boot #82443285 Short low profile tail (liquid not available) KTN101004 $30.50 Great Plains Yield-Pro Seed Tube Mount Mounts to seed tube. Standard dry tail KTN101000 $31.50 Standard liquid tail KTN101001 $32.50 John Deere 7000 7100 7200 7300 1700 Series 1530 Drill 1535 Drill Universal Bracket Fits Wave Vision Bracket mounts to seed disk opener shafts and around row unit shank. Standard dry tail KTN125012 $37.00 Standard liquid tail KTN115011 $37.00 Short low profile tail KTN126008 $37.00 Long low profile tail KTN121004 $37.00 Kinze (Gold) Bracket Fits Wave Vision Mounts inside row unit between scrapers. Will NOT work with spring loaded disk scrapers. Will NOT fit 7200, 7300 or 1700. Standard dry tail KTN125013 $37.00 Standard liquid tail KTN115012 $37.00 Short low profile tail KTN126009 $37.00 Long low profile tail KTN121005 $37.00 Seed Tube Mount Mounts to seed tube. Also fits 1530, 1535 drills. Standard dry tail KTN101000 $31.50 Standard liquid tail KTN101001 $32.50 Kinze 2000 Series 3000 Series Universal Bracket Fits Wave Vision Bracket mounts to seed disk opener shafts and around row unit shank. Will NOT fit EdgeVac planters Will NOT fit 2013 mechanical meter planters Standard dry tail KTN125012 $37.00 Standard liquid tail KTN115011 $37.00 Short low profile tail KTN126008 $37.00 Long low profile tail KTN121004 $37.00 Kinze (Gold) Bracket Fits Wave Vision Mounts inside row unit between scrapers. Will not work with spring loaded disk scrapers. EdgeVac and 2013 mechanical meter planters requires drilling 2 holes. Standard dry tail KTN125013 $37.00 Standard liquid tail KTN115012 $37.00 Short low profile tail KTN126009 $37.00 Long low profile tail KTN121005 $37.00 Seed Tube Mount Mounts to seed tube. Will NOT fit EdgeVac Will NOT fit 2013 mechanical meter planters Standard dry tail KTN101000 $31.50 Standard liquid tail KTN101001 $32.50 Monosem All Seed Tube Mount Mounts to seed tube. Standard dry tail KTN101000 $31.50 Standard liquid tail KTN101001 $32.50 White 5000 Series 6000 Series 8000 Series 9000 Series Universal Bracket Fits Wave Vision Bracket mounts to seed disk opener shafts. Bracket modification is required. Will NOT fit 5000 and 9000 series. Standard dry tail KTN125012 $37.00 Standard liquid tail KTN115011 $37.00 Short low profile tail KTN126008 $37.00 Long low profile tail KTN121004 $37.00 Seed Tube Mount Mounts to seed tube. Standard dry tail KTN101000 $31.50 Standard liquid tail KTN101001 $32.50 Case-IH Seed Boot Mount Seed Tube Mount Universal Bracket Mount Kinze (Gold) Bracket Mount VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 3535 Uneven seed germination and uneven plant emergence sap yields. Plants coming up even a little late can’t compete with their neighbors for resources and at pollination they’re vulnerable to heat stress and insects. Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence, and tests show, an average increase of six bushels per acre. KeeTon seed firMers • Set seeds to the bottom of the seed trench • Hit the depth you set on your planter • Ensures uniform seed-to-soil contact • Ensures uniform seed germination • Ensures uniform plant emergence • Research proves an average six bushel increase in corn yield Firmer contact leads to uniform emergence leads to 1,000 more ears per acre. Keeton Planter Replacement Tails Standard Dry Tail Standard Liquid Tail Short Low Profile Tail Long Low Profile Tail Standard tail with no liquid application tube. Use in non-sticky soils in all tillage environments. Works with WaveVision seed tube and all Keeton brackets. Standard tail with dual liquid application over the seed and split to the side walls of the seed trench. Use in non-sticky soils in all tillage environments. Works with WaveVision seed tube and all Keeton brackets. Low profile tail with splitter for liquid application. Use in sticky soil types and/or minimum tillage environments. Do not use low profile tail in sandy soil types. Works with WaveVision seed tube and all Keeton brackets. Low profile tail with liquid over the seed only (dry application recommended). Does not include a splitter. Use in sticky soil types and/or minimum tillage environments. Do not use low profile tail in sandy soil types. Works with WaveVision seed tube and all Keeton brackets. Product ID Price Product ID Price Product ID Price Product ID Price KTN125011 $34.50 KTN115013 $34.50 KTN126010 $34.50 KTN121006 $34.50 Keeton Planter Replacement Parts Product ID Description Price KTN125011 Replacement Firmer, dry tail only, fits in Universal or Kinze bracket $34.50 KTN115013 Replacement Firmer, dual tube tail only, fits in Universal or Kinze bracket $34.50 KTN126010 Replacement Firmer, short low profile tail only, fits in Universal or Kinze bracket $34.50 KTN121006 Replacement Firmer, long low profile tail only, fits in Universal or Kinze bracket $34.50 KTN111501 Bracket, Kinze Gold, with hardware $7.50 KTN131500 Bracket, Universal, with hardware $7.50 KTN150057 Pkg of 4, Bracket Kit for John Deere planters with Totally Tubular installed $28.00 KTN900000 Tubing, blue, 1/4” diameter, per foot $0.25 KTN900001 Hose clamp, for seed tube mount firmers $0.70 KTN900002 Tie strap, black $0.12 KTN900003 Tie strap, white $0.12 KTN900004 Splitter insert $0.55 KTN900017 Tubing, clear, 3/8” diameter x 2” long splice $0.10 KTN900024 Tubing, red, 1/4” diameter, per foot $0.25 HDW210245 Screw, 1/4-10 x 1-1/4, hex head slotted; for seed tube mount Keetons $0.35 HDW210253 Screw, 1/4-20 x 1-3/4, hex head slotted; for bracket mount Keetons $0.35 HDW210246 Screw, 1/4-10 x 1-3/4, hex head slotted; for seed tube mount Keetons with Mojo Wire $1.63 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.36 KeeTon seed firMers Get the money-making advantages of Keeton Seed Firmers for your drill, too. New field trials show that Firmers make you money in three ways: • Reduced seed costs. Improved germination means you get better stands with fewer seeds. On average, tests show a 9.4% increase in soybean germination. That translates to typical seed savings of about $2 per acre. • Increased soybean yields. Field tests show an average yield increase of over 7%. • Lower equipment and labor costs. Apply liquids as you plant with Keeton’s integrated liquid applicator tubes. Seed savings alone will pay for the Keeton Seed Firmers during the first year. Then you’ll profit year after year from the additional yield. Keeton Seed Firmers make a dramatic difference on shallow planted seeds like soybeans. Firming seeds into moisture and improving seed-to-soil contact improves germination. So you can reduce seeding rates of expensive seeds while maintaining productive stands. • Mounting brackets and instructions are included. • Drill firmers are only available with liquid tails. • For non-liquid use simply remove the tube from the tail. Standard Liquid Drill Tail Keeton Drill Replacement Parts Product ID Product Description Price KTN210054 Tail, drill, standard liquid $27.50 KTN210025 Tail, Sunflower drill, modified dry tail $30.50 KTN210055 Tail, drill, narrow liquid (Recommended for Great Plains Yield Pro planters.) $27.50 KTN900000 Tubing, blue, 1/4” diameter, per foot $0.25 KTN900017 Tubing, clear, 3/8” diameter x 2” long splice $0.10 Keeton Seed Firmer Drill Application Guide Make Models Installation Options Notes Tail Options Product ID Price Crustbuster 3700, 3800 3400 w/o parallel arms Metal Bracket Mounts on scraper bracket. Will not fit 3400 All-Plant or 3400 Min-Till openers. Standard liquid tail KTN210002 $30.50 Crustbuster 3400 Series 4000 Series Metal Bracket Mounts to scraper support rod. Fits All-Plant & Min-Till openers. Standard liquid tail KTN210004 $30.50 Case-IH 5100 5400 Metal Bracket Mounts to scraper housing. Standard liquid tail KTN210006 $29.50 Great Plains Fluted Metering Wheel Drills: 00, 05, 06, 07, 10 Series; 20 Series (-2003) Metal Bracket Mounts to scraper bracket. Standard liquid tail KTN210008 $29.50 Great Plains Precision Drills (singulating & volumetric metering wheel): 10, 20 Series Metal Bracket Mounts to scraper bracket. Standard liquid tail KTN210010 $29.50 Great Plains 15, 25 Series Planter Style Row Units and HD10 Series Row Units Metal Bracket Mounts to scraper bracket. Standard liquid tail KTN210027 $29.50 Great Plains All 00HD Series Row Units Metal Bracket Mounts to scraper bracket. Standard liquid tail KTN210028 $29.50 John Deere 1560, 1860 1590, 1890 1690, 1990 Metal Bracket Mounts to back of t-handle slotted bracket. Standard liquid tail KTN210012 $35.50 Metal Bracket John Deere 450, 455 1520 Metal Bracket Mounts to seed disk scraper. Standard liquid tail KTN210014 $29.50 John Deere 750, 1850 Metal Bracket Mounts to seed disk scraper. Standard liquid tail KTN210016 $35.50 Krause Most Metal Bracket Mounts to fertilizer opener. Will not fit 5200 and 5400. Standard liquid tail KTN210018 $30.50 Marliss Most Metal Bracket Mounts to seed disk opener. Will not fit 2038. Standard liquid tail KTN210020 $30.50 Tye All Metal Bracket Mounts to seed disk scraper. Standard liquid tail KTN210023 $30.50 Sunflower 9411, 9412, 9421 Metal Bracket Mounts to back of disk opener casting. Modified dry tail KTN210024 $30.50 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 3737 Mojo Wire Mojo Wires fit most planter Keetons. Will not fit low profile tails or drill Keetons. Mur-lok® Fitting Installation Instructions features include: • Leak Resistant Dual EPDM O-Rings • Chemical Resistant Polypropylene • NSF Standard 58 Certified • 150 psi @ 70ºF • 60 psi @ 140ºF • For Use with Plastic or Soft Metal Tubing Mur-loK fiTTings Why the Mojo Wire? • 3x to 5x pressure of standard Keeton • Ensures fast, uniform germination • Large payback potential, especially in resilient no-till soils • Quick fix for limp, aging Keeton firmers In North America, most seeders were never really engineered to plant no-till. For instance, the original press wheels on all planters (and so-called “no-till” drills) were designed for the loose, dry conditions found in tilled seedbeds—they were intended to pack the soil from the surface all the way down to the seed, which was easily done in loose tilled soil. Substantial packing was desirable to help the seed draw moisture from beneath, since the soil near the surface had dried with tillage. In no-till, this concept is terribly flawed. No-till soils are resilient (structured) and don’t readily fall back into the furrow. Plus, an enormous amount of pressure must be applied at the surface to do any seed firming at all down in the bottom of the furrow. In no- till, to get even 5 lbs of pressure at seed depth might require 50 to 150 lbs. applied to the press wheel at the surface, and even then it might not be enough and certainly won’t be consistent at seed depth. You are severely packing the sidewalls and soil over the seed (thru which it must push) in attempting to do something down at the bottom of the furrow. Why not just apply a precise amount of pressure exactly where it’s needed—at the bottom of the furrow? In the early ’90s, this is exactly what the introduction of the Keeton seed firmer was supposed to do. However, the Keetons applied only a few ounces to (at most) ~ 1.5 lbs of pressure on the business end of the Keeton. In many cases, that wasn’t enough force. The situation is made worse by the fact that the nylon material used to mold the Keetons loses its integrity (springiness) after awhile (apparently due to absorbing moisture, ‘cold flowing,’ and UV degradation). To remedy the situation, Exapta introduced the Mojo Wire stiffener in 2006, which supplies up to 5 times the pressure to the standard Keeton. In our testing and our customers’ experience, we’ve simply been amazed at how much better the germination consistency was—both in terms of higher percentages of seeds emerging, and in uniformity of timing of emergence. Another noticeable improvement was in the self-cleaning action of the Keeton against the furrow sidewalls. Adding the Mojo Wire has improved this self- cleaning action, at least in low-disturbance no-till. NOTE: One drawback to increasing the pressure on the Keeton is that the tail wears more quickly. If you put lots of acres on your planter in a season, expect to completely wear out a set of Keetons with the Mojo Wire installed. Mojo Wire Kits Product ID Product Description Price KTN400100 Mojo Wire, for Keeton seed tube mount $23.00 KTN400200 Mojo Wire, for standard Keeton bracket mount $20.00 KTN400211 Mojo Wire, for Wave Vision Keeton bracket mount $20.00 KTN400600 Mojo Wire, for Keeton drill firmer $8.00 Mojo Wire Replacement Parts Product ID Product Description Price KTN400900 Plastic mounting block for tubing $5.50 KTN400901 Hose clamp $1.25 KTN400902 Wire for KTN400100 $4.50 KTN400903 Steel mounting block for KTN400100 $5.50 KTN400904 Wire for KTN400200 $7.00 KTN400905 Wire for KTN400211 $7.00 HDW210246 Screw, 1/4-10 x 1-3/4, hex head slotted for KTN400100 $1.63 1. MAKE A CLEAN TUBE CUT Cut the tube squarely and if using plastic tubing, ensure that the cut has not made the tube out of round. Also ensure that the tube has a smooth outside diameter without any burrs or score marks prior to inserting it into the fitting. 2. INSERT TUBE INTO FITTING Push the tubing through the collet and dual o-rings until it bottoms out against the tube stop. The collet holds the tube in place and the dual o-rings provide a leak resistant seal. 3. TEST AND INSPECT Push and pull the tubing toward and away from the fitting to ensure that it has been installed properly. Test & inspect for any leaks. Product ID Product Description Price KTN500000 Mur-Lok union, 1/4” to 1/4” $1.95 KTN500001 Mur-Lok union, 3/8” to 1/4” $2.66 KTN500002 Mur-Lok union, 3/8” to 3/8” $2.64 KTN500003 Mur-Lok union, 1/2” to 3/8” $3.58 KTN500004 Mur-Lok union, 1/2” to 1/2” $3.04 KTN500005 Mur-Lok union, 5/16” to 1/4” $2.20 KTN500006 Mur-Lok union, 5/16” to 5/16” $2.14 KTN500100 Mur-Lok divider, 1/4” to 1/4” $3.07 KTN500101 Mur-Lok divider, 3/8” to 3/8” $3.54 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.38 Made of Chrome-Alloy For Longer Life. The Acra-Plant® insert creates a uniform V-Slice below the sidewall compaction of discs. The formed V-Shape contacts seed firmly on both sides . . . soil springs back . . . catching and squeezes seed . . . locking it in place within the row as metered. The Acra-Plant® insert enhances the planting performance of your planter. The V-slice creates a uniform firm & moist seedbed. It allows even spacing and uniform depth of each seed in the row. Faster and more even germination of seed. Faster and more uniform emergence of plants. Even competition between plants in row. Increased yield potential from each plant and better overall yeilds. aCra-PlanT V-sliCe inserTs Acra-Plant specializes in No-Till & Min-Till planting and drilling equipment, fertilizer application tools, and chisel plow tools. The current awareness and emphasis on No- Till and Min-Till agricultural practices emphasizes our full line of Acra-Plant Precision Planting/Seeding Solutions. The Six Most Important Characteristics of A Proper Crop Stand: 1. Fast germination 2. Uniform and fast emergence 3. Early root development 4. Uniform plant spacing in the row 5. Proper plant population 6. Correct leaf position note: not recommended for use in rocky conditions. Acra-Plant Replacement V-Slice Inserts Product ID Description Price APL410000 V-Slice insert, for APL100040 tandem blade opener (long piece) $51.95 APL410100 V-Slice insert, for APL009040, APL100040 tandem blade opener (short piece) $44.95 APL410601 V-Slice insert, for APL009840 $48.95 APL410602 V-Slice insert, for APL034550 $48.95 Acra-Plant V-Slice Inserts Product ID Description Price APL001685 V-Slice insert, White 6000-8000 series $25.95 APL001785 V-Slice insert, Kinze 2000 series, John Deere 7000-7300, 1700 series $27.95 APL001885 V-Slice insert, Kinze 3000 series, includes special socket-head cap screws with Loctite $39.95 APL001985 V-Slice insert, John Deere, XP row unit series $42.95 APL001772 Tube extension bracket, required when a straight, instead of curved, seed tube is used $7.95 Acra-Plant V-Slice Openers Product ID Description Price APL009040 V-9 opener, IHC 400-500 series with offset discs $177.95 APL009840 V-98 opener, Case-IH 800, 900, 1200 series $138.95 APL034550 V-51 opener, White 5100, 5700 series $145.95 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 3939 Convert your standard planter to a No-Till machine without increasing row unit down-pressure and without the high cost of residue management systems or coulters No-Till Now with Acra-Plant Notched Disc Openers Acra-Plant® Notched Disc Openers • Strong disc design is 50% thicker chrome-moly alloy that sheds wet soil better and keeps discs clear • Stronger, heavy duty bearing and flange design • Modified gothic arch bearing structure extends wear and runs straight and true • Molded rubber hubcap stays in place • Acra-Plant notched discs and inserts turn your present planter into the ultimate narrow profile no-till system insert • 11 & 15 notch discs aggressively slice through the toughest residue • Package requires the Acra-Plant V-slice insert Special Features of Acra-Plant No-Till/Min-Till Planter Notched Disc Opener Kit 1. The two disc blades in the set each have a different number of notches, 15 notches on one blade and 11 notches on the other. This assures that the blades will self-turn instead of skidding over old crop residue, and the blade notches overlap as they work together to actually CUT the trash ahead of the V-slice opener system. This feature converts the planter openers to a true NO-TILL operation that is equally suited for Minimum Till and Conservation Tillage plans. 2. The disc blades themselves are up to 50% thicker than the smooth OEM blades that they replace. Combine that with the Chrome-Boron-Moly alloy, and you get a strength and durability unmatched by other replacement blades. Cutting through heavy residue and trash acre after acre requires tough, durable, and thick opener blades. Acra-Plant answers the call to duty with these blades. 3. Note that the opener discs feature a flat ground edge, rather than the cheaper alternative of hollow grinding the edge. Flat grinding a true bevel allows the blades to self sharpen as they wear, rather than immediately going dull. 4. The bearings used in Acra-Plant opener discs are of the true Gothic Arch design. Gothic Arch 4-race bearings cost more, but they allow the bearings to transmit radial load, axial thrust & overturning moments to a much greater extent than the cheaper twin-race ball bearings. 5. The alloy casting V-slice opener that actually produces the uniform seed trench is made of 25% chrome for longer life and durability. aCra-PlanT noTCHed disC oPeners Acra-Plant Notched Disc Openers John Deere 7000-7300, 1700 Series, Kinze and White 6000-8000 Series Product ID Description Price APL101711 Acra-Plant notched disc opener, 15”-11 notch $93.95 APL101715 Acra-Plant notched disc opener, 15”-15 notch $93.95 APL001760 Bearing & flange repair kit, notched disc openers $49.95 Note: A firming point must be installed when using notched disc openers. Case-IH 400, 500, 800, 900, 1200 Series and White 5100, 5700 Series Product ID Description Price APL109811 Acra-Plant notched disc opener, 14”-11 notch $93.95 APL109815 Acra-Plant notched disc opener, 14”-15 notch $93.95 APL001760 Bearing & flange repair kit, notched disc openers $49.95 Note: A firming point must be installed when using notched disc openers. Acra-Plant Notched Marker Discs Product ID Description Price APL430000 Acra-Plant 13” notched marker disc for John Deere 7000-7300, 1700 series, Kinze and Case-IH 800, 900 series (additional mounting bracket is required). Note: For John Deere prior to 1974, must purchase AA27924 from a John Deere dealer. $111.95 APL430001 Marker bracket, Case-IH with folding markers and round shaft $39.95 APL430002 Marker bracket, Case-IH with non-folding markers and flat plate $44.95 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.40 Made Of Chrome-Alloy For Longer Life CAUTION: S.I. Distributing Inc. warrants these products to be free of defects in material and workmanship. Liability under warranty shall extend to replacement or credit of product found to be defective on examination by S.I. Distributing Inc. This warranty does not extend to misuse or damage by accident or negligence. Chrome castings are not guaranteed for use in rocky, stony or frozen ground. S.I. Distributing Inc. will not honor any claim for warranty on chrome castings that have been altered or welded on in any way. S.I. Distributing Inc. will not recognize any claims for consequential or incidental damages. APL700041 APL700042 APL700044 APL801300 APL801400 APL801600 aCra-PlanT ferTilizer KniVes aCra-PlanT blu-jeT ParTs • Acra-Plant replaceable point fertilizer knives outlast “throwaway” knives 3–5 times - reducing downtime and saving money in the long run • Chrome Carbide Points scour quickly to a high polish, slipping through the soil and pulling easier than “throwaway” knives — you’ll save more fertilizer with the unique self-sealing design • Acra-Tuff Chrome Carbide alloy point continues to perform like new throughout its life with no degradation of performance after just a few hundred acres • Acra knives are designed for minimum surface disturbance — perfect for your No-Till cropping plan • With a choice of three Acra-Tuff Chrome Carbide replacement points and many NH3 and liquid tube options, you can tailor your fertilizer rig to match your conditions and switch very easily if your crop rotation or nutrient plan changes APL700010 • Quick-Change • Side Mount Gas/liquid expel point is low, forward, and protected by the Chrome Carbide point to minimize freeze-up, plugging and tube wear, even in dual application Three styles of Chrome Carbide replacement points available to match your ground conditions Change worn inserts in seconds with spring pin High-strength steel shank is punched to accept most side-mount applicators 3/8? and 1/2? NH3 or liquid tubes available in just about any combination APL700043 APL701600 Product ID Description Price APL801300 V-crown ripper “Spring” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Narrow point is 2” wide and 14” long for deep tillage. $124.95 APL801400 V-crown ripper “Fall” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Wider point is 2-7/8” wide and 15-1/2” long for deeper tillage and more shattering action. $157.95 APL801600 Shin guard, Blu-Jet Sub-Tiller II with 1-1/2” shank. $157.95 Acra-Plant Fertilizer Knives Product ID Description Price APL700010 Shank with NH3 tube (.408 OD). Universal hole and slot to fit most applicators. Remove spirol pin for quick point replacement. Dead air space insulates point to prevent freeze-ups. $45.95 APL700041 Fertilizer point, standard wing. The most widely used and effective in a wide variety of soil types. Includes 3/8” x 1-3/8” spiral pin $28.95 APL700042 Fertilizer point, super wing. Ideal for use in sandy soils that need to be loosened or fractured to allow maximum penetration of fertilizer. Includes 3/8” x 1-3/8” spiral pin $36.95 APL700142 Strip till point, has a flat wedge point on bottom like a strip till knife $34.95 APL700043 Fertilizer point, heavy duty super wing. Ideal for use in sandy soils that need to be loosened or fractured to allow maximum penetration of fertilizer. Includes 3/8” x 1-3/8” spiral pin $33.95 APL700044 Fertilizer point, super wing with closer. Designed for sandy or clay soils that are both tough to open and tough to close. Incorporates a “Super Wing” as well as “Closing Wing” to seal the fertilizer at the desired location. Includes 3/8” x 1-3/8” spiral pin $47.95 APL701600 ST-16 heavy duty strip till point. Designed for 8-12” deep application and subsoil shattering on strip till rigs. Protected liquid tube for delivery of anhydrous or liquid. $76.95 Acra-Plant Fertilizer Tubes Product ID Description Price APL700020 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled $10.70 APL700021 Replacement tube, 3/8” liquid (.408” outside diameter) open end $10.15 APL700022 Replacement tube, 1/2” liquid (.569” outside diameter) open end $12.60 APL700023 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled, with clip rings for 1/2” plastic hose for dual applications. $24.60 APL700025 Replacement tube, 1/2” anhydrous (.569” outside diameter) crimped and drilled $13.35 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 41 Features & Benefits: • Relieves soil compaction zone for yield improvement • Improves soil tilth to increase nutrient availability and root uptake • Produces a subsoil profile that assures improved root penetration • Assures moisture retention in the driest conditions • Provides fracture and lift with little surface disruption or “slabbing” • Allows flexibility in running depth • Scours up, pulls easy and flows soil around the shank to reduce wear • Provides long wear life in the widest variety of soil conditions CRP points are available with wings and without wings for inner row and spring fieldwork. The unique design allows for the use of solid 25% chrome carbide in all the wear surfaces with mounting boots designed specifically for the most popular makes and models of disc rippers and subsoilers. 7” 10”2-1/2” aCra-PlanT ConserVaTion riPPer PoinTs Conservation Points are now available in 2-1/2” (no wing), 7” winged, & 10” winged for just about any application The CRP line of points is the newest evolution of Subsoiler & Ripper points designed by combining Acra-Plant technology with the years of experience ShieldAg has in supplying long- lasting high-performance Chrome Carbide Ripper Points. aCra-PlanT QuiCK-CHange ferTilizer KniVes For Chisel Plow Applicators Features & Benefits • Long-lasting Alloy replaceable points outwear ?throwaway? chisel knives 3–5 times • Continues to perform like new throughout its life, no degradation of performance after just a few hundred acres • Convert from fertilizer placement to standard chisel in just a few minutes by replacing the APL708041 fertilizer point with the APL705141 chisel plow point • Tube options available for nearly any NH3 or liquid application Please call with make and model of ripper for pricing. Acra-Plant Chisel Plow Applicators Key Product ID Description Price 1 APL708041 Chisel plow fertilizer point. Includes APL500657, 1/2” x 1-1/4” spiral pin $21.95 2 APL705141 Chisel plow tillage point. Reversible. Includes APL500657, 1/2” x 1-1/4” spiral pin. $27.95 3 APL705011 Chisel plow shank $26.95 4 APL708003 Adjusting wedge to change shank angle $9.25 5 APL705029 Tube mounting kit $13.95 6 APL705020 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled $10.90 6 APL705021 Replacement tube, 3/8” liquid (.408” outside diameter) open end $10.60 6 APL705022 Replacement tube, 1/2” liquid (.569” outside diameter) open end $13.00 6 APL705023 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled, with clip rings for 1/2” plastic hose for dual applications. $26.65 6 APL705024 Replacement tube, 1/2” anhydrous (.569” outside diameter) crimped and drilled $13.75 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.42 • Quick repair • Saves time and money • Easy installation, no tools required • Cost effective vs. OEM replacements • Patented Long Lasting Self-Lubricating Plastic Chain Tightner and/or Wear Block with 9/16” Hole • Decreases wood block replacement • Reduces chain wear and friction • Saves labor, money and downtime • Increases chain life and keeps chain tight • Lasts 4 To 5 times longer than wood blocks • Replaces any idler on chain driven equipment The Plastic Wear Block has characteristics that are very high in lubrication which reduces chain wear. After several years of continuous testing, this type of plastic has shown an outstanding capability to replace chain sprocket idlers on all types of machinery. As well as being used on the earlier models of Gleaner combines, there has been excellent success with them on the more recent models, where idler bearing pulleys and sprockets were being used. This Plastic Wear Block can definitely reduce your operating costs since the Plastic Wear Block is priced considerably lower than the current idler bearing. Product ID Description Price PDM020000 Quick Finger, 10-Pack $15.50 Note: Will only properly fit Level II pipe reels with 6” tine spacing. Quick Finger will fit ML reels with 4.5” tine spacing but it will be 3/8” shorter than the original tine. Quick Finger Installation Repaired Reel Finger in a Snap + = Product ID Description Price CBM500000 Plastic wear block $6.95 Broken Reel Finger The Quick Finger will Fit the Following Pipe Reels: AGCO 300, 400, 500, 700, 800 series heads Case-IH 1010, 1020, 2020, series heads Caterpillar 1998 and later John Deere 900, 600 series heads Massey Ferguson 9700, 9750, 9800, 9850 series heads New Holland 971, 973, 71C, 73C, 72C, 74C series heads QuiCK finger PlasTiC Wear bloCKs VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 43 The Paddle is a proven tine replacement system that offers true high performance at harvest time. When crop conditions make harvesting difficult and inefficient, the Paddle is the cost-effective alternative to standard tines. The Paddle’s six-inch width lift and feeds crop that standard tines miss. The Paddle provides full crop contact, even with short crop, and delivers positive and even feeding into the header. The Paddle helps reduce or eliminate the need for an expensive air reel. The Paddle is available for wood bat, tear-drop, and tube-type reels. HCC’s patented tine mounting system makes installation fast and easy. Paddles are packaged ten to a box and include mounting hardware with complete installation instructions. The “Paddle” offers several advantages over standard tines including: • Increased Harvest • Improved Feeding • Cleaner Cutterbar • Faster Harvesting The “Paddle” is packaged ten to a box and includes “Paddles”, screws and complete installation instructions. Original Tine Spacing Reel Width 18’ 20’ 25’ 30’ 36’ 4.5” 40 40 50 60 N/A 6.0” 30 40 40 50 60 Reel Tine Identification (1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit into the notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989. (2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2.5” (64 mm) above the edge. The Love Reel was not manufactured by HCC Inc. (3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart. The tines have a round nub that fits into a round hole in the tube. Supplied from 1989-1999. (4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes spaced 6.0” (152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube. Standard since 1999/2000. (5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” (114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine. HCC Paddle Tines Maximized Pickup High Performance Tines for Short or Sparse Crops The Paddle is designed to provide a complete sweep of the header with each rotation. By limiting the number of Paddles used, you save installation time & money. HCC Paddle Tines Product ID Description Price HCC783950 Paddle Tines, 10-pack, Polytine reel (1) $52.50 HCC783845 Paddle Tines, 10-pack, ML reel (3) $52.50 HCC783846 Paddle Tines, 10-pack, Level II reel (4) $52.50 HCC783949 Paddle Tines, 10-pack, wood bat reel (5) $55.70 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.44 HCC OEM Replacement Reel Tines Product ID Description Price HCC782018 Polytine reel tine, 10-pack, with screws (1) $22.94 HCC782123 Polytine reel tine, 500-pack, with screws (1) $779.10 HCC782094 Love reel tine, 10-pack, with screws (2) $28.98 HCC782124 Love reel tine, 275-pack, with screws (2) $673.58 HCC782226 ML reel tine, full bat, 10-pack, with screws (3) $28.98 HCC782551 ML reel tine, full bat, 180-pack, with screws (3) $441.00 HCC224017 ML reel tine, right hand bat, one (3) $3.13 HCC782223 ML reel tine, right hand bat, 6-pack, with screws (3) $17.06 HCC224018 ML reel tine, left hand bat, one (3) $3.13 HCC782224 ML reel tine, left hand bat, 6-pack, with screws (3) $17.06 HCC224019 ML reel tine, no bat, one (3) $3.71 HCC782225 ML reel tine, no bat, 6-pack, with screws (3) $20.79 HCC rePlaCeMenT reel Tines Reel Tine Identification (1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit into the notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989. (2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2.5” (64 mm) above the edge. The Love Reel was not manufactured by HCC Inc. (3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart. The tines have a round nub that fits into a round hole in the tube. Supplied from 1989-1999. (4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes spaced 6.0” (152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube. Standard since 1999/2000. (5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” (114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine. Product ID Description Price HCC783707 Level II reel tine, full bat, 10-pack, with screws (4) $35.70 HCC783597 Level II reel tine, full bat, 130-pack, with screws (4) $405.30 HCC224048 Level II reel tine, left hand bat, one (4) $3.52 HCC783708 Level II reel tine, left hand bat, 10-pack, with screws (4) $32.55 HCC224049 Level II reel tine, right hand bat, one (4) $3.52 HCC783709 Level II reel tine, right hand bat, 10- pack, with screws (4) $32.55 HCC224050 Level II reel tine, no bat, one (4) $3.52 HCC783710 Level II reel tine, no bat, 10-pack, with screws (4) $32.55 HCC480056 Wood bat steel tine, one (5) $2.40 HCC480057 Clip, for wood bat steel tine, one (5) $0.28 THe sure sToP APPLICATIONS: • Trailer Placement under Bins • Trailer Placement over Pit Screws • Alignment with Transport Augers • Alignment on Truck Scales • Permanent Mount or Portable with Optional Tri-Pod (not included) FEATURES: • 90 Decibel Alarm & LED Light Signals Your Exact Stopping Position • Operates on 110V, 8-Foot Cord Included • Weather Resistant • Proven Technology for 10+ Years • Accurate up to 13 Feet • Includes 4 Pieces of Reflective Tape Product ID Description Price WPS100000 Sure Stop $595.00 WPS200000 Reflective Tape, 8” piece $1.50 Tri-Pod Not Included VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 45 Tested and Refined Over Several Harvest Seasons by High-Hour Combine Users The Gateway, HCC’s NEW sieve and chaffer system, is significantly lighter than standard sieves and chaffers found on current combines. The patented design utilizes aluminum and plastic construction for lower frame weight. That reduces wear and tear on cleaning shoe bushings and bearings, extends their life, and reduces combine downtime. Unlike conventional all-steel sieves and chaffers that are difficult or impossible to repair, the modular construction of Gateway Sieves & Chaffers permits easy and cost-effective repair. The added lubricity of the plastic slats also prevents crop build up on the slats, especially when harvesting in near-freezing conditions. Side-by-side field comparisons demonstrate that Gateway Sieves & Chaffers clean grain as well or better than current systems. Gateway Sieves excel in cleaning lighter crops (like alfalfa seed) and heavy crops (like high yield / high moisture corn). Gateway Sieves & Chaffers are manufactured by HCC, Inc., the same company that makes virtually all of the original equipment sieves and chaffers. As a result, fit and function is guaranteed to meet or exceed original equipment standards. Gateway™ works with manual or remote adjustment systems. Handle makes it easy to adjust slats. Modular construction permits easy and cost-effective repair. Two slat design options for a variety of crops. The “LT” (top 45mm) and “ST” (bottom 33mm) are available. Gateway™ Sieves & Chaffers offer a number of advantages over standard steel sieves and chaffers including: • Greater slat lubricity for improved crop flow • Improved grain cleaning • Reduces combine down time • Less chaff build-up • Rust proof, resists freezing • Repairable with reduced wear and tear • Lightweight - up to 50% lighter Made By HCC gaTeWay sieVes & CHaffers Why spacing options? Narrow Spacing (33mm): Used for small grains: wheat, alfalfa, and cereal grains; 33ST top 33ST bottom. Wide Spacing (45mm): Used for large crops: corn and soybeans; provides faster operation through high-yielding crop; 45LT top 33ST bottom. Slat connectors are durable and provide reliable adjustment consistency. All components are replaceable for quick and economic repair. Slats are infinitely adjustable to match your specific crop needs. Slat opening is uniform and repeatable. The number of adjustment controls will match most units. Currently available for most combines. Please check our website www.sidist.com or call for current pricing on specific makes and models. 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.46 HCC orbiT TraC ii reel KiT True High Performance The revolutionary, patent-pending design of the Orbit Trac II is tailored to today’s high-performance headers and brings the reel tines right up to the auger before exiting the crop. The old-fashioned reel is replaced with a double-track system. The unique shape of the Orbit Trac II allows the reel tines to break their circular path and swing directly past the auger. Crop flow is positive. Build-up and slugging is reduced. Eliminating the Reel - Auger Gap Go with the flow. The Orbit Trac II™ allows you to harvest more crop in less time: • Continuous crop flow – less slugging • Positively places crop into the auger • Adjusts reel path to specific header depth and auger size • Longer sweep – more control of crop entry to header • Six years of field-testing • Retrofits all HCC ML and Level II reels built since 1990 • Lower Half of Track is Now Made of Steel The Orbit Trac II is a proven solution that has been field tested by large operators and custom cutters for six years. The Orbit Trac II has been designed as a retrofit for all HCC tube-type reels. Installation is easy and can be accomplished on the farm in a few hours. Product ID Product Description Price AGCO 400-8000 Series HCC031371 AGCO, 400, 500, 800, 8000 series, 25-35’ $2,669.01 HCC031372 AGCO, 400, 500, 800, 8000 series, 22’ & shorter $1,401.35 AGCO 8200 HCC031373 AGCO, 8200 series, 25-35’ $2,669.01 HCC031396 AGCO, 8200 series, 20’ & shorter $1,401.35 Case-IH 1010 & 1020 (Verify single eccentric or double eccentric reel.) HCC031382 Case-IH, 1994 & prior, 22’ & longer 1010 headers (-JJC0200000) & 1020 headers (-JJC0215000) $2,669.01 HCC031383 Case-IH, 1994 & prior, 20’ & shorter 1010 headers (-JJC0200000) & 1020 headers (-JJC0215000) $1,401.35 HCC031380 Case-IH, 1995-1997, 22’ & longer 1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000) $2,669.01 HCC031381 Case-IH, 1995-1997, 20’ & shorter 1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000) $1,401.35 HCC031369 Case-IH, 1998 & newer, 22’ & longer 1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-) $2,669.01 HCC031370 Case-IH, 1998 & newer, 20’ & shorter 1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-) $1,401.35 Case-IH 2010 & 2020 HCC031376 Case-IH, 2010, 2020, 22-35’ $2,669.01 HCC031377 Case-IH, 2010, 2020, 20’ & shorter $1,401.35 Case-IH 3020 HCC031532 Case-IH, 3020, 25-35’ $2,669.01 HCC031533 Case-IH, 3020, 20’ $1,401.35 Honey Bee HCC031385 Honey Bee, double eccentric $2,669.01 John Deere 600 Series (Will not fit Flex Draper) HCC031374 John Deere, 600 series, 25’ & longer $2,669.01 HCC031375 John Deere, 600 series, 22’ & shorter $1,401.35 John Deere 900 Series HCC031367 John Deere, 900 series, (serial # 645301-) 25’ & longer $2,669.01 HCC031368 John Deere, 900 series, (serial # 645301-) 22’ & shorter $1,401.35 Massey Ferguson HCC031388 Massey Ferguson, draper, double eccentric $2,669.01 HCC031384 Massey Ferguson, 1859, single eccentric $1,401.35 HCC031373 Massey Ferguson, 8200 series, 25-35’ $2,669.01 HCC031396 Massey Ferguson, 8200 series, 20’ & shorter $1,401.35 New Holland HCC031378 New Holland, 970-973, 25’ & longer $2,669.01 HCC031379 New Holland, 970-973, 22’ & shorter $1,401.35 HCC031376 New Holland 72C, 74C, 22-35’ $2,669.01 HCC031377 New Holland 72C, 74C, 20’ & shorter $1,401.35 HCC031400 New Holland 73C, 22’ & longer $2,669.01 HCC031401 New Holland 73C, 20’ & shorter $1,401.35 HCC031532 New Holland 740CF, 22’ & longer $2,669.01 HCC031533 New Holland 740CF, 20’ & shorter $1,401.35 Orbit Trac II Update Kits HCC031410 Orbit Trac II Update Kit, Double Eccentric (Steel track for bottom half of Orbit Reel) $491.21 HCC031411 Orbit Trac II Update Kit, Single Eccentric, LH (Steel track for bottom half of Orbit Reel) $245.60 HCC031412 Orbit Trac II Update Kit, Single Eccentric, RH (Steel track for bottom half of Orbit Reel) $245.60 Note: The Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 47 For Combines and Swathers - Smoother crop flow, Less downtime & superior component strength HCC Reels are constructed from resilient, durable materials such as 14 gauge HSLA tubing for bat tubes, and patented, tough polymer tines giving the reels greater strength at lower weight. Center tubes on 15 to 30 foot reels are 8-inches in diameter and 10-inches on reels larger than 30 feet. Integral hex drive pins increase pin shear strength by 75%, while heavy, welded 8mm crank arms increase bat tube lateral and torsional strength. HCC Reels feature an innovative tine layout, staggering tines to reduce weight and bat wrapping while creating a more efficient tine path. With fewer parts, stronger components, 35 – 40% greater visibility, and lighter weight, HCC Reels improve performance and reduce downtime. • Lower Weight • Stronger Construction • Increased Visibility • More Effective Crop Movement HCC CoMPleTe orbiT TraC ii reel Made By Advance Engineering has allowed a stronger reel with fewer parts. Steel tine reel option also available. Lighter weight reels require less horsepower and lower drive loads. Product ID Product Description Pkg. Price Total Price AGCO 400-8000 Series 25’ HCC031392 Orbit II attaching package, AGCO, 25’ & 30’ $4,081.61 $6,132.54 HCC030561 Reel bundle, Level II, AGCO, CIH, 25’ $2,050.93 30’ HCC031392 Orbit II attaching package, AGCO, 25’ & 30’ $4,081.61 $6,455.62 HCC030581 Reel bundle, Level II, AGCO, CIH, 30’ $2,374.01 AGCO 8200 25’ HCC031397 Orbit II attaching package, AGCO 8200, 25’ & 30’ $3,976.23 $6,027.16 HCC030561 Reel bundle, Level II, AGCO, CIH, 25’ $2,050.93 30’ HCC031397 Orbit II attaching package, AGCO 8200, 25’ & 30’ $3,976.23 $6,350.24 HCC030581 Reel bundle, Level II, AGCO, CIH, 30’ $2,374.01 35’ HCC031395 Orbit II attaching package, AGCO 8200, 35’ $4,978.56 $8,224.61 HCC032082 Reel bundle, Level II, AGCO 8200, 35’ $3,246.05 Case-IH 1020 (1) 25’ HCC031387 Orbit II attaching package, CIH 1020, 25’ & 30’ $4,260.51 $6,311.44 HCC030561 Reel bundle, Level II, AGCO, CIH, 25’ $2,050.93 30’ HCC031387 Orbit II attaching package, CIH 1020, 25’ & 30’ $4,260.51 $6,634.52 HCC030581 Reel bundle, Level II, AGCO, CIH, 30’ $2,374.01 Case-IH 2020 25’ HCC031393 Orbit II attaching package, CIH 2020, 25’ & 30’ $4,297.27 $6,306.53 HCC030560 Reel bundle, Level II, CIH 2020, 25’ $2,009.26 30’ HCC031393 Orbit II attaching package, CIH 2020, 25’ & 30’ $4,297.27 $6,532.45 HCC030580 Reel bundle, Level II, CIH, JD, NH, 30’ $2,235.18 35’ HCC031398 Orbit II attaching package, CIH 2020, 35’ $5,039.83 $8,472.01 HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18 Case-IH 3020 25’ HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79 $6,354.82 HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.03 30’ HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79 $6,838.20 HCC030582 Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’ $2,390.41 35’ HCC031535 Orbit II attaching package, CIH 3020, NH 740CF, 35’ $5,424.31 $8,856.49 HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18 John Deere 600 Series (Will not fit Flex Draper) 25’ HCC031389 Orbit II attaching package, JD 600, 25’ & 30’ $4,099.99 $6,007.02 HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.03 30’ HCC031389 Orbit II attaching package, JD 600, 25’ & 30’ $4,099.99 $6,490.40 HCC030582 Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’ $2,390.41 35’ HCC031402 Orbit II attaching package, JD 600, 35’ $5,150.72 $8,582.90 HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18 John Deere 900 Series 25’ HCC031390 Orbit II attaching package, JD 900, 25’ & 30’ $4,185.76 $6,092.79 HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.03 30’ HCC031390 Orbit II attaching package, JD 900, 25’ & 30’ $4,185.76 $6,420.94 HCC030580 Reel bundle, Level II, CIH, JD, NH, 30’ $2,235.18 New Holland 740CF 25’ HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79 $6,354.82 HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.03 30’ HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79 $6,838.20 HCC030582 Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’ $2,390.41 35’ HCC031535 Orbit II attaching package, CIH 3020, NH 740CF, 35’ $5,424.31 $8,856.49 HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18 (1) For Case-IH headers 1998 and newer with serial number #JJC0315001 & CBJ023003 and up. Please call for complete Reel replacement options for other combines and swathers not listed above. Note: The Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990. 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.48 Completely Fill Your Grain Bin Extension The Bubble-Up Auger is a good companion product for any make of combine hopper extensions. It will take the load and strain off of the combine’s hopper fill system. The Bubble-Up Auger enables the user to put the “PEAK OF THE HEAP” where it’s wanted and provides more complete filling of the combine’s hopper extension. The Bubble-Up Auger uses 8” diameter by 46” tall open flight auger that utilizes “Super Edge” helicoid for longer wear and a heavy duty hydraulic motor for years of trouble free power. The Bubble-Up Auger quickly folds down into the combine’s hopper for storage. The Bubble-Up Auger requires approximately 10 GPM of oil at 1,500 PSI to operate. It will run approximately 300 RPM. Because it runs 100% full in operation, it can handle large quantities of grain per hour, posing no problems with either 8 or 12 row corn heads. The Bubble-Up Auger includes everything needed to install it in the combine hopper, except hoses, which are best measured and made up after installation of the Bubble-Up Auger is completed. Normally, the Bubble-Up Auger connects directly into the reel drive outlets for corn head work or in series with the reel drive motor for flex head work. When operated in this fashion, the Bubble-Up Auger will run full speed for corn; but markedly slower when doing flex head work. This happens because when the operator sets the speed of the reel for his harvest conditions, the Bubble-Up Auger will receive less oil, resulting in a slower speed. Generally, because the bushels of crop that need to be handled is less with flex head work, having the Bubble-Up Auger run slower is usually not a problem, but something to be aware of. Under normal conditions it is NOT necessary to purchase the optional hydraulic kit since the Bubble-Up Auger connects directly into the reel drive outlets. The only exception is when harvesting rice it is recommended to purchase the hydraulic kit. If it is desired that the Bubble-Up Auger run at full speed in all harvest applications, then it needs to be plumbed directly into the combine’s reel drive circuit. Various kits are available that include all the fittings and valves required. • Reduces grain damage • Reduces wear & load on combine bin fill system • Utilizes “super edge” helicoid for longer wear • Large trouble free orbit motor for high torque • Mounting brackets attach quickly & easily • Installs in less than one hour • Quickly folds down lower than the cab • Includes a one year warranty burVee bubble-uP auger The Bubble-Up Auger Fits All Popular Makes - Regardless of Their Bin Fill System. Mounting Brackets Attach Quickly Reduces Grain Damage Relieves Wear & Load Pivot Plate Mount for Ease of Adjustment Quickly Folds Lower Than Your Cab THE ORI GIN AL Burvee Bubble-Up Auger Product ID Description Price BRV500100 Bubble-Up Auger $895.00 Optional Hydraulic Kits Product ID Description Price BRV500200 Hydraulic kit for John Deere 20 series $150.00 BRV500300 Hydraulic kit for John Deere 9000 series $200.00 BRV500400 Hydraulic kit for IH/Case-IH, before mid-1995 (1400, 1600) $150.00 BRV500500 Hydraulic kit for Case-IH, mid 1995-2000 $200.00 BRV500600 Hydraulic kit for Case-IH, 2001-current $200.00 BRV500700 Hydraulic kit for New Holland, TR96, TR97, TR98 $200.00 BRV500900 Hydraulic kit for other makes (specify make, model and year) $200.00 Allows Bubble-Up Auger to operate at full speed when harvesting small grain. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 49 HCC fliP reel KiT The Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in canola and other tall, stringy crops. Installation is easy and can be done on equipment you already own. Designed as a retro-fit for all HCC tube-type reels built since 1990. ML 4-1/2” tine spacing or Level II 6” tine spacings are designed to work with the Flip Reel Kit. You can install it yourself in just a few hours using the Installation Instruction Manual. Eliminate Crop Wrapping Around Bat Tubes CalMar auger sPouT Universal Flow Control. Control the Flow With a Calmar Auger Spout, you can efficiently and safely direct the flow of grains and oilseeds to all areas of your truck box or grain cart without splash, spillage, and wind loss • Eliminates crop wrapping around bat tubes • Designed to fit HCC tube type reels built since 1990 Flip Reel Standard Reel OEM on left & Calmar Auger Spout on right. • Easy Installation • Serves as an Extension to your auger for easier unloading • Grain flow is concentrated but not restricted • Built in pressure release • Fits 12” - 17” augers Product ID Vendor ID Description Price CIL014000 FC-1 Calmar Auger Spout, Standard Only fits bottom discharge augers 14” and under. Will not work on end discharge augers. Includes extra extensions to be used at the user’s discretion. Most economical model, but does not feature pressure release safety door. $338.00 CIL014010 FC4-U08 Calmar Auger Spout, Deluxe, 14” Fits bottom discharge and end discharge augers 14” and under. Features a pressure release safety door which will open should the bottom of the Auger Spout becomes plugged or blocked. Includes extra extensions to be used at the users discretion. Note: Not recommended for 2009 and newer Case- IH and New Holland combine models; use FC4-U09 $549.00 CIL017000 FC4-U09 Calmar Auger Spout, Deluxe, 14-17” Fits bottom discharge and end discharge augers from 14” to 17”. Features a pressure release safety door which will open should the bottom of the Auger Spout becomes plugged or blocked. Includes extra extensions to be used at the user’s discretion. $799.00 HCC Flip Reel Kit Product ID Product Description Price AGCO HCC031515 AGCO, 400, 500, 800, 8000 series, double eccentric $1,880.34 HCC031520 AGCO, 400, 500, 800, 8000 series, single eccentric $1,021.49 HCC031510 AGCO, 8200, 9250 series, double eccentric $2,044.09 HCC031521 AGCO, 8200, 9250 series, single eccentric $1,102.81 HCC031511 AGCO, 5100, 5200 draper, double eccentric $1,931.58 HCC031522 AGCO 5100, 5200 draper, single eccentric $1,047.11 Case-IH HCC031516 Case-IH, 1010, 1020, 3020, double eccentric $1,900.39 HCC031520 Case-IH, 1010, 1020, 3020 single eccentric $1,021.49 HCC031517 Case-IH, 2010, 2020, double eccentric $1,900.39 HCC031523 Case-IH, 2010, 2020, single eccentric $1,040.42 Honey Bee HCC031357 Honey Bee, clamp mounted, double eccentric $2,071.94 HCC031513 Honey Bee, bracket mounted, double eccentric $2,091.99 John Deere HCC031518 John Deere, 600 flex series, 900 draper, double eccentric $1,988.39 HCC031524 John Deere, 600 flex series, single eccentric $1,071.61 HCC031519 John Deere, 900 series, double eccentric $2,443.99 HCC031525 John Deere, 900 series, single eccentric $1,278.81 HCC031365 John Deere, flex draper; 625FD, 630FD, 635FD, double eccentric $2,029.20 HCC031351 John Deere, flex draper; 640FD, double eccentric $2,021.15 New Holland HCC031515 New Holland, 971, 973, double eccentric $1,880.34 HCC031520 New Holland, 971, 973, single eccentric $1,021.49 HCC031517 New Holland 72C, 74C, double eccentric $1,900.39 HCC031523 New Holland 72C, 74C, single eccentric $1,040.42 HCC031515 New Holland 73C, double eccentric $1,880.34 HCC031520 New Holland 73C, single eccentric $1,021.49 HCC031516 New Holland 740 CF, double eccentric $1,900.39 HCC031520 New Holland 740 CF, single eccentric $1,021.49 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.50 MagnojeT sPray nozzles • Ceramic spray nozzles at affordable prices. • Highest quality 99% alumina ceramic. • Ceramic nozzles last 5-15 times longer. • All MagnoJet nozzles are pre-orificed. This reduces internal pressure, produces larger droplets and can reduce drift by 50%. • Full line of standard and air inducted spray nozzles; flat fan, twin outlet, super turbo, flood deflector. • All MagnoJet nozzles meet International Standards and use Standard Color Codes. New Product THE ADVANTAGES OF CERAMICS FOR AGRICULTURAL SPRAYING A large percentage of farmers are using GPS guidance systems on their tractors, sprayers and combines. These systems can place seeds, herbicides, insecticides and fertilizer accurately to within fractions of an inch. And yet expensive sprayers are still being equipped with spray nozzles that only last from 200 to 500 acres before they should be replaced with new nozzles. Why not look at spray nozzle capabilities in the same way, only without anywhere near the investment? Simply put, if you can spray 100 acres with stainless steel, then you should be able to spray 500 acres with HD plastic and you should be able to spray 1,600 acres or more with ceramic Just the down time to change the spray nozzles makes MagnoJet ceramic nozzles a great bargain. CERAMIC SPRAY NOzzLES CAN SAVE CHEMICALS Chemical costs have gone through the roof, so you must do a good job of applying your chemicals. Spraying expensive farm fungicides and insecticides with inferior spray nozzles, makes no business sense and will produce poor results and poor results can be devastating to your yields. You are using the best chemicals and yet not utilizing the best spray nozzles for the job. ALL MAGNOJET CERAMIC NOzzLES ARE PRE- ORIFICED Pre-orificed nozzles are better because this reduces the pressure inside the nozzle which produces larger droplets that can reduce drift by 50 percent. It also reduces the wear on the spray nozzle tip. reduces drift – longer lasting save Time not Changing nozzles as often easy removal of Pre-orifice for Cleaning BETTER SPRAY PATTERNS As spray nozzles wear their spray patterns and droplet sizes change and diminish the effectiveness of the spray. High quality MagnoJet ceramic spray nozzles can last 5 to 15 times longer than plastic or stainless nozzles. MagnoJet Spray Nozzles Product ID Vendor ID Color Price Product ID Vendor ID Color Price Lowered Drift Flat Fan 80° Standard Super Turbo Flat Fan 135° Standard MNJ220110 BD-01 Orange $4.18 MNJ400310 ST-01 Orange $5.88 MNJ220115 BD-015 Green $4.18 MNJ400315 ST-015 Green $5.88 MNJ220120 BD-02 Yellow $4.18 MNJ400320 ST-02 Yellow $5.88 MNJ220130 BD-03 Blue $4.18 MNJ400325 ST-025 Lilac $5.88 MNJ220140 BD-04 Red $4.18 MNJ400330 ST-03 Blue $5.88 MNJ220150 BD-05 Brown $4.18 MNJ400340 ST-04 Red $5.88 Also available in 110° nozzles MNJ400350 ST-05 Brown $5.88 Anti-Drift Flat Fan 80° Air Inducted MNJ400360 ST-06 Gray $5.88 MNJ211810 AD-IA-01 Orange $10.32 Super Turbo Flat Fan 140° Air Inducted MNJ211815 AD-IA-015 Green $10.32 MNJ411310 ST-IA-01 Orange $10.32 MNJ211820 AD-IA-02 Yellow $10.32 MNJ411315 ST-IA-015 Green $10.32 MNJ211825 AD-IA-025 Lilac $10.32 MNJ411320 ST-IA-02 Yellow $10.32 MNJ211830 AD-IA-03 Blue $10.32 MNJ411325 ST-IA-025 Lilac $10.32 MNJ211840 AD-IA-04 Red $10.32 MNJ411330 ST-IA-03 Blue $10.32 MNJ211850 AD-IA-05 Brown $10.32 MNJ411340 ST-IA-04 Red $10.32 MNJ211860 AD-IA-06 Gray $10.32 Deflector/Flood 130° Standard Anti-Drift Flat Fan 110° Standard MNJ500305 MDC-0.5 Orange $4.92 MNJ200110 AD-01 Orange $4.18 MNJ500307 MDC-0.75 Green $4.92 MNJ200115 AD-015 Green $4.18 MNJ500310 MDC-1.0 Yellow $4.92 MNJ200120 AD-02 Yellow $4.18 MNJ500315 MDC-1.5 Blue $4.92 MNJ200130 AD-03 Blue $4.18 MNJ500320 MDC-2.0 Red $4.92 MNJ200140 AD-04 Red $4.18 MNJ500325 MDC-2.5 Brown $4.92 MNJ200150 AD-05 Brown $4.18 MNJ500330 MDC-3.0 Gray $4.92 Anti-Drift Flat Fan 110° Air Inducted MNJ500340 MDC-4.0 White $4.92 MNJ211110 AD-IA-01 Orange $10.32 MNJ500350 MDC-5.0 Light Blue $4.92 MNJ211115 AD-IA-015 Green $10.32 MNJ500375 MDC-7.5 Light Green $4.92 MNJ211120 AD-IA-02 Yellow $10.32 Deflector/Flood 150° Air Inducted MNJ211125 AD-IA-025 Lilac $10.32 MNJ511305 TM-IA-0.5 Orange $11.64 MNJ211130 AD-IA-03 Blue $10.32 MNJ511307 TM-IA-0.75 Green $11.64 MNJ211140 AD-IA-04 Red $10.32 MNJ511310 TM-IA-1.0 Yellow $11.64 MNJ211150 AD-IA-05 Brown $10.32 MNJ511315 TM-IA-1.5 Blue $11.64 MNJ211160 AD-IA-06 Gray $10.32 MNJ511320 TM-IA-2.0 Red $11.64 Twin Outlet Flat Fan 110° Standard MNJ511325 TM-IA-2.5 Brown $11.64 MNJ300110 AD-01.D Orange $7.27 MNJ511330 TM-IA-3.0 Gray $11.64 MNJ300115 AD-015.D Green $7.27 MNJ511340 TM-IA-4.0 White $11.64 MNJ300120 AD-02.D Yellow $7.27 MNJ511350 TM-IA-5.0 Light Blue $11.64 MNJ300125 AD-025.D Lilac $7.27 MNJ511375 TM-IA-7.5 Light Green $11.64 MNJ300130 AD-03.D Blue $7.27 MagnoJet Quick Coupling Caps MNJ300140 AD-04.D Red $7.27 MNJ000110 M-223 White; AD $0.98 MNJ300150 AD-05.D Brown $7.27 MNJ000111 M-224 Green; AD-IA, AD-IA/D, ST- IA, TM-IA $1.48MNJ300160 AD-06.D Gray $7.27 MNJ300180 AD-08.D White $7.27 Twin Outlet Flat Fan 110° Air Inducted MNJ000112 M-231 Yellow; AD-D, ST, MDC $0.98MNJ311110 AD-IA/D-01 Orange $11.64 MNJ311115 AD-IA/D-015 Green $11.64 MagnoJet Filters MNJ311120 AD-IA/D-02 Yellow $11.64 MNJ000100 M-142 Red; 50 Mesh $0.81 MNJ311125 AD-IA/D-025 Lilac $11.64 MNJ000101 M-143 Blue; 80 Mesh $0.81 MNJ311130 AD-IA/D-03 Blue $11.64 MNJ000102 M-144 Green; 100 Mesh $0.81 MNJ311140 AD-IA/D-04 Red $11.64 MagnoJet Rubber Seals MNJ311150 AD-IA/D-05 Brown $11.64 MNJ000103 M-217 For all caps $0.26 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 51 radura disC MoWer blades Rolled Edges for Greater Strength and Durability with Less Chipping and Breakage than other Brands with Ground Edges. Advantages of RADURA® quality blades • Highest wear life due to special edge making process • Maximum safety due to rigorous quality control and testing • Tens of millions used by OEM and aftermarket customers • Excellent corrosive protection The trademark RADURA® is world famous for disc mower blades with a long service life and a clean cut. A special cold rolling process of the cutting edges on the RADURA® blade results in a more durable cutting edge and maintains a sharp edge longer than blades with ground edges. RADURA® blades are used by the leading disc mower manufacturers and are the first choice in the replacement market worldwide. Radura Disc Mower Blades Product ID Application Width Length Hole Size Price RSP041864 Claas, Deutz-Fahr, Fella, Krone Flat 1.575 3.780 0.748 $1.03 RSP041870 Deutz-Fahr LH 1.575 3.780 0.748 $1.18 RSP041874 Deutz-Fahr LH 1.575 3.543 0.748 $1.08 RSP041879 Greenland, John Deere, Kuhn, Massey Ferguson, New Holland, PZ Zweegers LH 1.575 3.425 0.640 $1.20 RSP041882 Greenland, John Deere, Kuhn, Massey Ferguson, New Holland, PZ Zweegers RH 1.575 3.425 0.640 $1.20 RSP041887 Deutz-Fahr SM55 Flat 1.575 3.780 $1.40 RSP041895 Galfre, Maragon Flat 1.811 4.252 0.827 $1.78 RSP041896 Galfre, Maragon Flat 1.811 4.252 0.827 $1.78 RSP041899 PZ Zweegers Dome 1.811 4.134 0.827 $1.38 RSP041926 Gehl, John Deere, Kuhn, New Holland, Sitrex LH 1.772 3.740 0.640 $1.63 RSP041928 Gehl, John Deere, Kuhn, New Holland, Sitrex RH 1.772 3.740 0.640 $1.63 RSP041973 Krone LH 1.890 4.409 0.748 $1.95 RSP041974 Krone RH 1.890 4.409 0.748 $1.95 RSP041986 Case-IH, New Holland LH 1.969 4.331 0.896 $2.08 RSP041987 Case-IH, New Holland RH 1.969 4.331 0.896 $2.08 RSP042006 Vicon LH 1.890 4.213 0.725 $2.05 RSP042007 Vicon RH 1.890 4.213 0.725 $2.05 RSP042010 Case-IH, Challenger, Gehl, Hesston, Massey Ferguson, New Idea RH 1.850 4.213 0.728 $2.05 RSP042011 Case-IH, Challenger, Gehl, Hesston, Massey Ferguson, New Idea LH 1.850 4.213 0.728 $2.05 RSP042014 Claas DISCO 210/250/260/290/300/340/3000/3050/8500 RH 1.890 4.527 0.748 $1.75 RSP042015 Claas DISCO 210/250/260/290/300/340/3000/3050/8500 LH 1.890 4.527 0.748 $1.75 RSP042018 Fella LH 1.890 4.173 0.748 $1.95 RSP042019 Fella RH 1.890 4.173 0.748 $1.95 RSP042022 Case-IH, Challenger, Gehl, Hesston, John Deere, Kuhn, Massey Ferguson, New Holland, New Idea LH 1.772 4.213 0.717 $1.95 RSP042026 Case-IH, Challenger, Gehl, Hesston, John Deere, Kuhn, Massey Ferguson, New Holland, New Idea RH 1.772 4.213 0.717 $1.95 RSP042030 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea RH 1.850 4.213 0.728 $2.05 RSP042031 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea LH 1.850 4.213 0.728 $2.05 RSP042034 Gehl, John Deere, Kuhn, New Holland LH 1.772 4.843 0.717 $2.03 RSP042037 Gehl, John Deere, Kuhn, New Holland RH 1.772 4.843 0.717 $2.03 RSP042049 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea RH 1.890 4.252 0.718 $2.05 RSP042050 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea LH 1.890 4.252 0.718 $2.05 RSP042051 Krone LH 1.969 3.780 0.748 $1.78 RSP042052 Krone RH 1.969 3.780 0.748 $1.78 RSP042055 Case-IH, New Holland RH 1.969 4.331 0.896 $2.08 RSP042056 Case-IH, New Holland LH 1.969 4.331 0.896 $2.08 RSP042057 AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson, New Idea RH 1.969 4.724 0.906 $1.90 RSP042059 AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson, New Idea LH 1.969 4.724 0.906 $1.90 RSP042064 Bush Hog, Case-IH, Fella, Gehl, Greenland, Lely, Massey Ferguson, New Idea, Vicon LH 1.890 4.724 0.728 $1.93 RSP042066 Bush Hog, Case-IH, Fella, Gehl, Greenland, Lely, Massey Ferguson, New Idea, Vicon RH 1.890 4.724 0.728 $1.93 RSP052697 Bush Hog, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea RH 1.969 4.724 0.896 $2.10 RSP052698 Bush Hog, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea LH 1.969 4.724 0.896 $2.10 Please specify make and model so correct blade(s) can be selected. 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.52 High Quality, Effective and Efficient The ProCut Section The greatest damage to knife sections and guards is caused by bent sections. With ProCut sections, this is eliminated because the entire knife section is heat-treated, not just the cutting edge as with conventional made sections. Therefore the section does not bend. This considerably lengthens the life of the knife and reduces damage to the guards. All ProCut sections are secured with special serrated bolts. The shoulder of the bolt wedges itself in the section and the knifeback. Self-locking nuts ensure a secure and durable splice. The cutouts in the center of the section help clean out residue buildup and also reduce the weight of the knife. The sections are not chrome plated. They are zinc plated and have a self-sharpening effect. Chromed sections have a surface that is much harder than the guards and wear the guards faster and do not stay sharp as long. Also, chrome plating is a very hazardous process and an environmental concern. The Sectional Knife All SCH cutter bars are manufactured as sectional knives. Now you can transport a sickle bar of any length in a car, pickup or ship it by overnight carrier. The spliced knife assemblies can be packaged in easy to handle nine foot or less lengths to virtually eliminate delays in delivery, damage in transport or injury in handling. Dealers can make up any length of knife from a minimal amount of segments. The special knife joint allows the sectional knife to perform in the same way as a one-piece knife and is as strong or stronger than the original knifeback. The Double Guard The guard is made out of high quality spring steel with an extremely hard and wear resistant surface. Because the bottom and top of the guard are bolted to the cutterbar, the guards hardly ever bend and never have the top lip break off, a common problem of standard guards. This extraordinary high stability has made the use of croplifters much more reliable, even under extreme working conditions. Beveled guard cutting edges hold the crop more firmly, and do not pull it into the cutting gap; this considerably improves the discharge of the cut crop. The cutting forces and therefore the power expended is reduced substantially. The depth of hardening on the cutting edge of the guard is increased by about 30% because of the beveled edge. As a result, the guards last longer. The SCH EasyCut II guard gets more crop through the cutting system. The cutting edge was lengthened by 7% and the cutaway was enlarged for better flow. In addition, the blunt guard eliminates spearing of residue, especially in no-till conditions. The Cutting System The combination of the SCH EasyCut II guard and cutterbar knife create a cutting system which can be used for cutting almost everything in the world of forestry and agriculture. Even onions or hedges present no problem to the SCH EasyCut II system. The design of the EasyCut II guard also eliminates hold down clamps, shims and all of the adjusting that goes with them. Unlike other cutting systems, there’s no upward pressure on the knife. With the section alternately cutting against the top and bottom of the guards, the cutting edges stay close together. Because the knife remains balanced, you get top cutting performance from start to finish. And with our system always in balance, it keeps cutting under more severe conditions, it’s easier to drive, and we have less breakage. sCH easyCuT ii CuTTing sysTeM sCH easyCut ii cutting systems can be retrofitted on almost all types of combine harvesters, swathers, mower conditioners and sickle bar mowers. blunt guard causes less spearing of trash optimized cutting edge square hole flatter + wider ridge VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 53 Replaces the standard wear plates on machines equipped with the SCH EasyCut II cutting system. Typically, a wear plate supports the knife. With today’s wider platforms and demand for better cutting performance this leads to more wear on the knifeback and wear plates. The SCH Bridge Rollers reduces the friction on the knifeback and allows the knife to run more smoothly for superior cutting performance. The Bridge Rollers are made with a hardened roller, sealed bearings and a cap to keep the dirt out. With reduced knife resistance there is less load on the wobble box. Replace existing wear plates on current SCH cutting systems or a new conversion kit can be ordered with Bridge Rollers. When replacing worn wear plates a new knifeback is required to maintain proper tolerances. Please refer to next page for kit prices. SCH Roller Guide System: • Less knifeback wear • Less friction • Less knifeback breakage • Easier knife installation • Less power required to drive the knife • Less platform vibration sCH roller guide sysTeM Top Bridge Roller Bottom Bridge Roller sCH easyCuT ii CuTTing sysTeM sCH Wear PlaTe sysTeM A standard SCH EasyCut conversion kit includes wear plates that are hardened for longer life. The wear plate supports the knife back from behind ensuring a linear knife movement. In addition, the back edge of the knife section overlaps the knife back and rides on top of the wear plate keeping the cutting system in bal- ance. With these features it creates a tight fit in the double guard and eliminates the need for hold downs and the adjusting that goes with them. The SCH wear plate system is a big improvement over the stan- dard cutting system and provides superior performance even in the most difficult cutting conditions. The SCH wear plate system is an economical option and is recommended when cutting high moisture crops such as alfalfa or when harvesting in the dirt and mud such as in edible beans. Wear plates come in different thicknesses based upon the make and model of the machine that the SCH EasyCut kit is being installed on. In addition, there are different lengths to match the guards they are used with and to work around bolts or other obstacles on the header’s backbone. The wear plates can be replaced later with the SCH roller guide system but a new knife assembly is highly recommended at that time. SCH Wear Plate System: • Linear knife movement • Balanced cutting system • No hold downs or adjustments • Economically priced 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.54 Kit price includes all parts to convert to the SCH EasyCut II SYSTEM, including one pre-assembled knife with knifehead, (less bearing) all guards, and hardware, plus ten extra replacement sections with hardware and two guards. Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Also includes 10mm socket and 10mm wrench for section bolts. Note: The ideal cutter bar speed is 540 RPM for optimum cutting performance. For Most Combines, Windrowers, Mower Conditioners & Mowers sCH easyCuT ii KiTs • EasyCut II blunt guard eliminates spearing of residue • EasyCut II guard gets more crop through the cutting system • SCH knife system never needs adjustment • SCH guards bolt to top and bottom of platform • SCH guards are fully heat treated • SCH guards have two beveled cutting edges • SCH sections are fully heat treated • SCH sections will not bend • Optional SCH rollers improve performance • Optional SCH rollers reduce friction & vibration Price Adjustments to SCH EasyCut Kits All double drive kits Add $232.00 All Hiniker bars Add $141.00 All Massey Ferguson/Claas combine models Add $141.00 All Massey Ferguson 8450 & 8460 models Add $141.00 White combines with wobble box & Hart Carter floating cutter bar Deduct $78.00 Massey Ferguson combines with wobble box & Hart Carter floating cutter bar Deduct $78.00 Pitman arm style drives, Love and Hart Carter (combines only) Deduct $78.00 SCP083690: Optional 540 RPM, 11-1/2” pulley for Case-IH oil bath header. $82.62 SCH EasyCut Sickle Bar Mower Kit Prices Width SCH Kit with Wear Plates SCH Kit with Rollers 5 $313.00 $360.00 6 $387.00 $445.00 7 $447.00 $509.00 8 $509.00 $579.00 9 $569.00 $651.00 10 $631.00 $724.00 Kit price includes pre-assembled knife, without knifehead, all guards and hardware. Must re-use original equipment manufacturer (OEM) knifehead. No extra replacement parts are included. Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. SCH EasyCut Kit Prices Width SCH Kit w/ Wear Plates SCH Kit w/ Rollers SCH Roller Guide Kit* Width SCH Kit w/ Wear Plates SCH Kit w/ Rollers SCH Roller Guide Kit* 7 $686.00 $748.00 $92.00 19 $1,354.00 $1,514.00 $233.00 8 $735.00 $803.00 $95.00 20 $1,403.00 $1,574.00 $233.00 9 $784.00 $864.00 $110.00 21 $1,446.00 $1,623.00 $251.00 10 $832.00 $920.00 $129.00 22 $1,494.00 $1,685.00 $269.00 11 $882.00 $975.00 $129.00 22.5 $1,538.00 $1,734.00 $269.00 12 $936.00 $1,041.00 $148.00 24 $1,587.00 $1,795.00 $283.00 13 $986.00 $1,097.00 $159.00 25 $1,630.00 $1,844.00 $300.00 14 $1,049.00 $1,170.00 $171.00 27 $1,716.00 $1,955.00 $318.00 15 $1,116.00 $1,244.00 $184.00 30 $1,832.00 $2,089.00 $362.00 16 $1,170.00 $1,305.00 $196.00 35 $2,028.00 $2,329.00 $422.00 16.5 $1,201.00 $1,342.00 $196.00 36 $2,077.00 $2,383.00 $435.00 17 $1,231.00 $1,378.00 $203.00 39 $2,252.00 $2,635.00 $473.00 17.5 $1,263.00 $1,410.00 $208.00 40 $2,310.00 $2,690.00 $485.00 18 $1,293.00 $1,446.00 $208.00 42 $2,406.00 $2,802.00 $506.00 18.5 $1,323.00 $1,483.00 $220.00 45 $2,527.00 $2,827.00 $529.00 *Installing a roller guide kit on an existing SCH EasyCut cutting system requires a new knifeback. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 5555 The SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your machine is not listed, this does not mean that we do not fit that machine. Please call for assistance. sCH easyCuT ii KiTs Mfg. Type Model Description Lefthand Knifehead Guards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mm AGCO Platform, Draper 9250 OEM x x OEM AGCO Platform, Flex 300 Series, Early Style SCP011195 x x AGCO Platform, Flex 500, 800, 8000, 300 Series, 3/4” knifehead SCP011222 x x AGCO Platform, Flex 500, 800, 8000, 300 Series, 7/8” knifehead SCP013997 x x AGCO Platform, Flex 8200 OEM x x AGCO Platform, Flex Hart Carter, Pitman Drive (1pc head) OEM x x AGCO Platform, Flex Hart Carter, Pitman Drive (2pc head) OEM x x AGCO Platform, Flex Hart Carter, Series 2 SCP11252 x x AGCO Platform, Rigid 300 Series, Rigid SCP011195 x x Case-IH Mower #9, 7/16” BB OEM x x Case-IH Mower #9, 1/2” BB OEM x x Case-IH Mower #31 OEM x x Case-IH Mower 1100, 100 OEM x x Case-IH Mower 1200 OEM x x Case-IH Mower 1300 OEM x x Case-IH Mower Cond. 990 SCP011259 x x Case-IH Mower Cond. 1190 SCP011185 x x Case-IH Mower Cond. 1490, 1590 SCP011186 x x Case-IH Mower Cond. 8330 SCP015474 x x Case-IH Mower Cond. SC414 SCP015474 x x Case-IH Platform, Draper 2062 SCP081373 x x Case-IH Platform, Draper 2152 SCP081379 x x SCP081380 Case-IH Platform, Draper 2162 SCP081379 x x SCP081380 Case-IH Platform, Draper 4000 SCP011185 x x Case-IH Platform, Flex 503 OEM x x Case-IH Platform, Flex 810 (4-1/2” COFS) SCP011252 x x Case-IH Platform, Flex 810 (5” COFS) SCP011227 x x Case-IH Platform, Flex 810 Hiniker SCP011227 x x Case-IH Platform, Flex 810 Pitman Drive OEM x x Case-IH Platform, Flex 820 SCP011226 x x Case-IH Platform, Flex 1020 SCP014266 x x Case-IH Platform, Flex 2020, early style SCP083792 x x SCP083793 Case-IH Platform, Flex 2020, S/N all “HAJ” & up to CBJ021301 SCP011213 x x SCP011214 Case-IH Platform, Flex 2020, S/N CBJ021301 and after SCP083815 x x SCP083816 Case-IH Platform, Flex 3020 SCP002401 x x Case-IH Platform, Rigid 403 Hiniker OEM x x Case-IH Platform, Rigid 1010 SCP014266 x x Case-IH Windrower 201 OEM x x Case-IH Windrower 230 SCP011185 x x Case-IH Windrower 275 OEM x x Case-IH Windrower 375 OEM x x Case-IH Windrower 721 OEM x x Case-IH Windrower 725 OEM x x Case-IH Windrower 1275 SCP011229 x x Case-IH Windrower 5000, 7/16” BB SCP011185 x x Case-IH Windrower 5000, 1/2” BB SCP011185 x x Case-IH Windrower 6000 SCP015428 x x Case-IH Windrower 8220 SCP015474 x x Case-IH Windrower 8340 SCP015474 x x Case-IH Windrower 8360, 7/16” BB SCP015474 x x Case-IH Windrower 8370, 8830, 3/8” BB SCP015474 x x Case-IH Windrower 8370, 8830, 7/16” BB SCP015474 x x 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.56 sCH easyCuT ii KiTs Mfg. Type Model Description Lefthand Knifehead Guards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mm Case-IH Windrower 8380 SCP083616 x x SCP083617 Case-IH Windrower 8820 SCP015474 x x SCP015475 Case-IH Windrower 8840, 8870 SCP083616 x x SCP083617 Case-IH Windrower HDX162 SCP083614 x x SCP083615 Caterpillar Platform, Flex Caterpillar SCP011126 x x Caterpillar Platform, Flex Caterpillar SCP011126 x x Caterpillar Platform, Flex Caterpillar, 5/16” BB SCP011126 x x Claas Windrower S450 SCP011125 x x Ford Mower 501 OEM x x Ford Mower 505 OEM x x Ford Mower 515 OEM x x Ford Mower 642 OEM x x Frontier Mower 1477 OEM x x Gehl Mower Cond. 1070 SCP083618 x x Gehl Mower Cond. 1090 SCP083618 x x Gehl Mower Cond. 1216 Hydra Swing SCP013667 x x Gehl Mower Cond. 2130 SCP014534 x x Gehl Mower Cond. 2160, 1/4” BB SCP014534 x x Gehl Mower Cond. 2160, 7/16” BB SCP014534 x x Gehl Mower Cond. 2170 SCP011280 x x Gehl Mower Cond. 2270 SCP011280 x x Gehl Mower Cond. 2650 SCP011229 x x Gehl Mower Cond. 2850 SCP011229 x x Gehl Mower Cond. HK108 OEM x x Gehl Windrower 2230 SCP011229 x x Gehl Windrower 2240 SCP011280 x x Hesston Mower Cond. 1010 SCP011258 x x Hesston Mower Cond. 1070, 1071, 3/8” BB SCP014534 x x Hesston Mower Cond. 1085, 1090, 1091, 1095 SCP014534 x x Hesston Mower Cond. 1110 SCP014534 x x Hesston Mower Cond. 1120 SCP015474 x x Hesston Mower Cond. 1150 SCP014534 x x Hesston Mower Cond. 1160, 8200, 1/4” BB SCP015474 x x Hesston Mower Cond. 1160, 8200, 3/8” BB SCP015474 x x Hesston Mower Cond. 1160, 8200, 7/16” BB SCP015474 x x Hesston Mower Cond. 1170 SCP083616 x x SCP083617 Hesston Mower Cond. 1260, 7/16” BB SCP011229 x x Hesston Mower Cond. 1265 Hydra Swing SCP011229 x x Hesston Mower Cond. 1275 SCP083616 x x SCP083617 Hesston Mower Cond. 1660, 1/4” BB SCP083616 x x Hesston Mower Cond. PT 10 SCP011258 x x Hesston Windrower 320 SCP011229 x x Hesston Windrower 420 SCP011229 x x Hesston Windrower 500, 1/2” BB SCP014534 x x Hesston Windrower 520, 7/16” BB SCP014534 x x Hesston Windrower 600 SCP011258 x x Hesston Windrower 1014 Hydra Swing SCP011229 x x Hesston Windrower 2262, 1/2” BB SCP014534 x x SCP014535 Hesston Windrower 5200 SCP081363 x x Hesston Windrower 6400, 6600, 5/16” BB SCP011229 x x Hesston Windrower 6400, 6600, 3/8” BB SCP011229 x x Hesston Windrower 6400, 6600, 7/16” BB SCP011229 x x Hesston Windrower 6450, 6465 SCP014534 x x SCP014535 Hesston Windrower 6455 SCP014534 x x SCP014535 Hesston Windrower 6550 SCP014534 x x SCP014535 Hesston Windrower 6600, 6610, 3/8” BB SCP011229 x x Hesston Windrower 6600, 7/16” BB SCP011229 x x VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 5757 sCH easyCuT ii KiTs Mfg. Type Model Description Lefthand Knifehead Guards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mm Hesston Windrower 6655, 6665 SCP014534 x x SCP014535 Hesston Windrower 8100 SCP015474 x x SCP015475 Hesston Windrower 8400, 3/8” BB SCP083616 x x SCP083617 Hesston Windrower 8400, 7/16” BB SCP083616 x x SCP083617 Hesston Windrower 8450, 3/8” BB SCP083616 x x SCP083617 Hesston Windrower 8450, 8840, 8870, 7/16” BB SCP083616 x x Hesston Windrower 9300 SCP013667 x x SCP013668 Honey Bee Platform, Draper Draper SCP014226 x x Honey Bee Platform, Draper Draper, 8mm wear plates SCP014226 x * Honey Bee Platform, Flex 3/16” BB, 8mm wear plates SCP014226 x * SCP014227 Honey Bee Platform, Flex 1/4” BB SCP014226 x x SCP014227 Honey Bee Platform, Flex Series 3 OEM x x John Deere Mower #5, 3/8” BB OEM x x John Deere Mower #5, 7/16” BB OEM x x John Deere Mower #8, #38, #39 OEM x x John Deere Mower #8W OEM x x John Deere Mower #9 OEM x x John Deere Mower #10 OEM x x John Deere Mower #11 OEM x x John Deere Mower #37 OEM x x John Deere Mower 50 (Bushing Knifehead) SCP083662 x x John Deere Mower 250, 350, 450 (Bearing Knifehead) SCP083663 x x John Deere Mower 250, 350, 450 (Bushing Knifehead) SCP083662 x x John Deere Mower 3700 SCP083663 x x John Deere Mower Cond. 485 (Ball Joint Knifehead) SCP011220 x x John Deere Mower Cond. 710 SCP011220 x x John Deere Mower Cond. 720 (Ball Joint Knifehead) SCP011220 x x John Deere Mower Cond. 720, 820, 7/16” BB SCP015427 x x John Deere Mower Cond. 720, 820, 1/2” BB SCP015427 x x John Deere Mower Cond. 820, 1/2” BB (Ball Joint Knifehead) SCP011220 x x John Deere Mower Cond. 1207 (Ball Joint Knifehead) SCP011220 x x John Deere Mower Cond. 1207 (Bearing Knifehead) SCP015427 x x John Deere Mower Cond. 1207 (Bushing Knifehead) SCP011196 x x John Deere Mower Cond. 1209 (Ball Joint Knifehead) SCP011220 x x John Deere Mower Cond. 1209 (Bearing Knifehead) SCP015427 x x John Deere Mower Cond. 1209 (Bushing Knifehead) SCP011196 x x John Deere Mower Cond. 1219 (Ball Joint Knifehead) SCP011220 x x John Deere Mower Cond. 1219 (Bearing Knifehead) SCP015427 x x John Deere Mower Cond. 1219 (Bushing Knifehead) SCP011196 x x John Deere Mower Cond. 1380, 1424 (K10) SCP011196 x x John Deere Mower Cond. 1380, 1424 (K42) SCP015427 x x John Deere Mower Cond. 1600 (Bearing Knifehead) SCP015427 x x SCP081378 John Deere Platform, Draper 78 SCP011220 x x John Deere Platform, Draper 160 SCP015427 x x John Deere Platform, Draper 130, 3/8” BB SCP011196 x x John Deere Platform, Draper 130, 7/16” BB SCP011196 x x John Deere Platform, Auger 220, 230 (Ball Joint Knifehead) SCP011220 x x John Deere Platform, Auger 230, 240 (Needle Bearing) SCP015427 x x John Deere Platform, Draper 930, 936 SCP081352 x x John Deere Platform, Flex 200 Series SCP011207 x x John Deere Platform, Flex 600 Series HydraFlex SCP015421 x x John Deere Platform, Flex 900 Series SCP011207 x x John Deere Platform, Flex Hart Carter, Pitman Drive OEM x x John Deere Platform, Rigid 55 SCP011207 x x John Deere Platform, Rigid 55, Hart Carter, Pitman Drive OEM x x John Deere Platform, Rigid 200 Series SCP011207 x x John Deere Platform, Rigid 900 Series SCP011207 x x 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.58 sCH easyCuT ii KiTs Mfg. Type Model Description Lefthand Knifehead Guards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mm John Deere Windrower 300 (Bushing Knifehead) SCP011196 x x SCP011197 John Deere Windrower 300, 1380,1424 (Bearing Knifehead) SCP015427 x x SCP081378 John Deere Windrower 580, 1/4” BB OEM x x John Deere Windrower 580, 5/16” BB OEM x x John Deere Windrower 800, 2250, 2270, 3/8” BB SCP011220 x x John Deere Windrower 800, 7/16” BB SCP011220 x x John Deere Windrower 800, 1/2” BB SCP011220 x x John Deere Windrower 830 SCP011220 x x John Deere Windrower 880 SCP011220 x x John Deere Windrower 890 SCP015427 x x John Deere Windrower 2250 SCP011220 x x John Deere Windrower 2270 SCP011220 x x John Deere Windrower 2280 SCP011196 x x John Deere Windrower 2320, 2420 SCP015427 x x John Deere Windrower 2360 SCP015428 x x John Deere Windrower 2420, 1/2” BB SCP015427 x x Kosch Mower 4840 OEM x x Love Platform, Flex Love Bar OEM x x Massey Ferguson Mower #41 OEM x x Massey Ferguson Mower #42 OEM x x Massey Ferguson Mower 410 OEM x x Massey Ferguson Mower Cond. 81 OEM x x Massey Ferguson Mower Cond. 725 SCP011263 x x Massey Ferguson Mower Cond. 925 SCP011263 x x Massey Ferguson Platform, Auger 1880 OEM x x Massey Ferguson Platform, Draper 220 OEM x x Massey Ferguson Platform, Draper 655, 675, 775, 785 SCP011188 x x Massey Ferguson Platform, Draper 885 SCP015428 x x Massey Ferguson Platform, Draper 9250 OEM x x OEM Massey Ferguson Platform, Flex 1859, 9100 Series OEM x x Massey Ferguson Platform, Flex 8200 OEM x x Massey Ferguson Platform, Flex 9224 Rotary SCP011255 x x Massey Ferguson Platform, Flex 9850 (AGCO Manufactured) SCP013997 x x Massey Ferguson Windrower 35 OEM x x Massey Ferguson Windrower 200 OEM x x Massey Ferguson Windrower 775 SCP011220 x x Massey Ferguson Windrower 785 SCP011188 x x Massey Ferguson Windrower 3850 SCP011222 x x M/F-Claas Windrower 36, 44 OEM x x M/F-Claas Platform, Flex 8450, 8460 SCP011125 x x M/F-White Platform, Flex 8560, 9520, 1/4” BB SCP011255 x x M/F-White Platform, Flex 8560, 9520, 3/8” BB SCP011255 x x M/F-White Platform, Flex 8920 SCP011255 x x M/F-White Platform, Flex 9300 SCP011255 x x M/F-White Platform, Flex 9330 SCP011255 x x M/F-Claas Platform, Rigid 8460 SCP011125 x x MacDon Mower Cond. 4000 SCP083669 x x MacDon Platform, Auger 920 SCP015428 x x SCP081351 MacDon Platform, Draper 942 SCP015428 x x SCP081351 MacDon Platform, Draper 972 SCP013667 x x SCP013668 MacDon Platform, Draper 974 SCP081373 x x MacDon Platform, Draper FD70 SCP081379 x x SCP081380 MacDon Platform, Draper FD75 SCP081379 x x SCP081380 MacDon Platform, Draper D60 SCP081379 x x SCP081380 MacDon Platform, Flex 973 SCP015428 x x MacDon Windrower 910 SCP015428 x x MacDon Windrower 920 SCP015428 x x SCP081351 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 5959 sCH easyCuT ii KiTs Mfg. Type Model Description Lefthand Knifehead Guards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mm MacDon Windrower 960 SCP015428 x x MacDon Windrower 3000 OEM x x MacDon Windrower 5000, 5020 SCP013667 x x MacDon Windrower 5010 SCP013667 x x MacDon Windrower 7000 SCP015428 x x Mccormick Mower Mower, 7/16” BB OEM x x New Holland Mower 405 OEM x x New Holland Mower 450, 455, 1/4” BB OEM x x New Holland Mower 450, 455, 3/8” BB OEM x x New Holland Mower 450, 455, 7/16” BB OEM x x New Holland Mower 451, 456, 1/4” BB OEM x x New Holland Mower 451, 456, 3/8” BB OEM x x New Holland Mower 451, 456, 7/16” BB OEM x x New Holland Mower 451, 456, 1/2” BB OEM x x New Holland Mower Cond. 467 SCP011219 x x New Holland Mower Cond. 469 SCP011219 x x New Holland Mower Cond. 472, 477, 478 SCP011192 x x New Holland Mower Cond. 474 SCP011191 x x New Holland Mower Cond. 488, 479 SCP011192 x x New Holland Mower Cond. 489, 3/8” BB SCP011191 x x New Holland Mower Cond. 489, 7/16” BB SCP011191 x x New Holland Mower Cond. 490 SCP011219 x x New Holland Mower Cond. 492, 3/8” BB SCP011191 x x New Holland Mower Cond. 492, 7/16” BB SCP011191 x x New Holland Mower Cond. 495, 1495 SCP011224 x x New Holland Mower Cond. 880 OEM x x New Holland Mower Cond. 1496 OEM x x OEM New Holland Platform, Flex 73C SCP011213 x x SCP011214 New Holland Platform, Flex 74C, S/N all HAJ & up to PNL018301 SCP011213 x x SCP011214 New Holland Platform, Flex 74C, S/N PNL018301 and after SCP083815 x x SCP083816 New Holland Platform, Flex 740CF SCP002401 x x New Holland Platform, Flex 94C, 8mm Plates SCP014226 x New Holland Platform, Flex 972 SCP011213 x x SCP011214 New Holland Platform, Flex 973 SCP011213 x x New Holland Platform, Flex 9750 Rotary SCP011255 x x New Holland Platform, Rigid 971 SCP011213 x x New Holland Windrower 114 SCP083678 x x SCP083679 New Holland Windrower 116, 1116 SCP011276 x x SCP011277 New Holland Windrower 499, 1469, 1499 OEM x x OEM New Holland Windrower 905 OEM x x New Holland Windrower 910, 3/8” BB SCP011276 x x SCP011277 New Holland Windrower 910, 7/16” BB SCP011276 x x New Holland Windrower 912 SCP011276 x x SCP011277 New Holland Windrower 1100 SCP011276 x x New Holland Windrower 1112 SCP011276 x x SCP011277 New Holland Windrower 1114 SCP011276 x x SCP011277 New Holland Windrower 1118 SCP011276 x x SCP011277 New Holland Windrower 1465, 3/8” BB SCP011191 x x New Holland Windrower 1475, 3/8” BB SCP083614 x x New Holland Windrower 1475, 2450, 2550, 2300 SCP083614 x x SCP083615 New Holland Windrower 2216 SCP083614 x x SCP083615 New Holland Windrower 2326 SCP083614 x x SCP083615 New Idea Mower #40 OEM x x New Idea Mower 251, 254 OEM x x New Idea Mower 252 OEM x x New Idea Mower 522, 3/8” BB OEM x x New Idea Mower 522, 7/16” BB OEM x x 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.60 sCH easyCuT ii KiTs These SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your machine is not listed, this does not mean that we do not fit that machine. Please call for assistance. Mfg. Type Model Description Lefthand Knifehead Guards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mm New Idea Mower 522, 1/2” BB OEM x x New Idea Mower Cond. 290 OEM x x New Idea Mower Cond. 299 OEM x x New Idea Mower Cond. 509 SCP011186 x x New Idea Mower Cond. 5107 OEM x x New Idea Mower Cond. 5109 OEM x x New Idea Mower Cond. 5112 SCP011186 x x New Idea Mower Cond. 5114 SCP011186 x x New Idea Platform, Flex 711 SCP011282 x x New Idea Platform, Flex 713, 813 Uni Harvester OEM x x New Idea Platform, Flex 715 Uni Harvester OEM x x New Idea Platform, Flex 716S SCP011282 x x New Idea Platform, Flex 815 SCP011282 x x Oliver Mower 82 OEM x x Oliver Platform, Flex 525 OEM x x Oliver Platform, Flex 7600 OEM x x Owatonna Mower 20, Pitman Drive OEM x x Owatonna Mower Cond. 200 SCP011280 x x Owatonna Windrower 235 SCP011280 x x Owatonna Windrower 260, 270, 280 SCP011280 x x Owatonna Windrower 265, 275, 285 SCP011280 x x Owatonna Windrower 280 SCP015428 x x Owatonna Windrower 280, 7/8”-18 Threaded Knifehead SCP011281 x x Renn Windrower 2000 SCP011220 x x Rowse Mower 3/8” BB OEM x x Rowse Mower 7/16” BB OEM x x Versatile Windrower #10 SCP011193 x x Versatile Windrower 400, 3” C.O.F.S. SCP011217 x x Versatile Windrower 400, 3/1/2” C.O.F.S. SCP011193 x x Versatile Windrower 2800 OEM x x Versatile Windrower 4018 OEM x x Versatile Windrower 4022 OEM x x Versatile Windrower 4025 OEM x x OEM Versatile Windrower 4030 SCP083677 x x SCP083680 Versatile Windrower 4400 SCP011217 x x Vicon Windrower 722 SCP011188 x x White Platform, Flex Kwik Cut OEM x x White Windrower 6200 SCP011188 x x VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 61 sCH easyCuT ii Knife asseMblies (1) (2) (3) (4) Coarse Section 7 Serrations/Inch Fine Section 10 Serrations/Inch • (1) & (3) Original knife assembly has the knife sections installed the same way as the original knife assembly. • (2) & (4) Replacement knife assembly has the knife sections installed the opposite way as the original knife assembly. • If unsure how the knife assembly starts, order the knife with a half section because the half section can be easily removed. • Some knife assemblies may need cut to length to match original knife. • Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. SCH Sections Product ID Description Price SCP110978 Section, SCH, Coarse, Box of 25 (standard on all SCH kits) $39.92 SCP080502 Section, SCH, Coarse, 10-Pack (includes 10 sections & hardware) $21.61 SCP110961 Section, SCH, Fine, Box of 25 (wheat or grass only applications) $39.92 SCP080504 Section, SCH, Fine, 10-Pack (includes 10 sections & hardware) $21.61 SCP080503 Hardware, SCH Bolt & Nut 50-Pack (hardware for 25 SCH sections) $14.31 SCP013935 Half Section, SCH, Single $2.22 Coarse sections (7 serrations per inch) are recommended for soybeans and alfalfa. Fine sections (10 serrations per inch) are recommended for wheat and grasses. SCH Knife Assembly Pieces Product ID Description Length Where Used Price SCB081602 Knife Assembly, #1 Bar 102.25” Left hand end, 32 sections + 1/2 section, original $132.35 SCB081603 Knife Assembly, #1R Bar 99.25” Left hand end, 31 sections + 1/2 section, replacement $128.22 SCB081604 Knife Assembly, #2 Bar 100.25” Left hand end, 32 sections, original $132.35 SCB081605 Knife Assembly, #2R Bar 97.25” Left hand end, 31 sections, replacement $128.22 SCB081606 Knife Assembly, #3 Bar 89.75” Middle piece, 27 sections $111.68 SCB081607 Knife Assembly, #4 Bar 106.25” Right hand end, 28 sections $115.81 SCB081608 Knife Assembly, #5 Bar 82.25” Right hand end, 22 sections $90.99 SCB081609 Knife Assembly, #6 Bar 58.25” Right hand end, 14 sections $57.91 SCB081610 Knife Assembly, #7 Bar 34.25” Right hand end, 8 sections $33.08 SCB081611 Knife Assembly, #8 Bar 22.25” Right hand end, 4 sections $16.53 Where used is in reference to left hand single-drive platforms. SCH Knifeback Product ID Description Length Where Used Price SCP012022 Knifeback, #1 Bar 102.25” Left hand end, drilled for 1/2 section, original $49.37 SCP012031 Knifeback, #1R Bar 99.25” Left hand end, drilled for 1/2 section, replacement $48.48 SCP012023 Knifeback, #2 Bar 100.25” Left hand end, drilled for full section, original $49.37 SCP012032 Knifeback, #2R Bar 97.25” Left hand end, drilled for full section, replacement $48.48 SCP012024 Knifeback, #3 Bar 89.75” Middle piece $46.47 SCP012025 Knifeback, #4 Bar 106.25” Right hand end $52.27 SCP012026 Knifeback, #5 Bar 82.25” Right hand end $40.65 SCP012027 Knifeback, #6 Bar 58.25” Right hand end $34.86 SCP012030 Knifeback, #7 Bar 34.25” Right hand end $16.82 SCP012028 Knifeback, #8 Bar 22.25” Right hand end $11.60 Where used is in reference to left hand single-drive platforms. SCH Knife Assemblies Starting With A HALF Section SCH Knife Assemblies Starting With A FULL Section Knife Assembly Length Number of Sections Original Knife Assembly Product ID (1) Replacement Knife Assembly Product ID (2) Price Knife Assembly Length Number of Sections Original Knife Assembly Product ID (3) Replacement Knife Assembly Product ID (4) Price 7’ 1/2 + 30 SCB210300 SCB210301 $123.95 7’ 30 SCB220300 SCB220301 $123.95 8’ 1/2 + 34 SCB210340 SCB210341 $140.47 8’ 34 SCB220340 SCB220341 $140.47 9’ 1/2 + 38 SCB210380 SCB210381 $157.00 9’ 38 SCB220380 SCB220381 $157.00 10’ 1/2 + 42 SCB210420 SCB210421 $173.53 10’ 42 SCB220420 SCB220421 $173.53 11’ 1/2 + 46 SCB210460 SCB210461 $190.06 11’ 46 SCB220460 SCB220461 $190.06 12’ 1/2 + 50 SCB210500 SCB210501 $206.58 12’ 50 SCB220500 SCB220501 $206.58 13’ 1/2 + 54 SCB210540 SCB210541 $223.10 13’ 54 SCB220540 SCB220541 $223.10 15’ 1/2 + 62 SCB210620 SCB210621 $256.15 15’ 62 SCB220620 SCB220621 $256.15 16’ 1/2 + 66 SCB210660 SCB210661 $272.69 16’ 66 SCB220660 SCB220661 $272.69 17’ 1/2 + 70 SCB210700 SCB210701 $289.21 17’ 70 SCB220700 SCB220701 $289.21 18’ 1/2 + 74 SCB210740 SCB210741 $305.73 18’ 74 SCB220740 SCB220741 $305.73 20’ 1/2 + 82 SCB210820 SCB210821 $338.78 20’ 82 SCB220820 SCB220821 $338.78 22’ 1/2 + 90 SCB210900 SCB210901 $371.84 22’ 90 SCB220900 SCB220901 $371.84 24’ 1/2 + 98 SCB210980 SCB210981 $404.89 24’ 98 SCB220980 SCB220981 $404.89 25’ 1/2 + 102 SCB211020 SCB211021 $421.41 25’ 102 SCB221020 SCB221021 $421.41 27’ 1/2 + 110 SCB211100 SCB211101 $454.47 27’ 110 SCB221100 SCB221101 $454.47 30’ 1/2 + 122 SCB211220 SCB211221 $504.04 30’ 122 SCB221220 SCB221221 $504.04 35’ 1/2 + 142 SCB211420 SCB211421 $586.67 35’ 142 SCB221420 SCB221421 $586.67 36’ 1/2 + 146 SCB211460 SCB211461 $603.20 36’ 146 SCB221460 SCB221461 $603.20 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.62 sCH easyCuT ii ParTs • Improved Positioning • Improved Wear Resistance • Simplified Mounting Knife Connector Kits Wear Plates All SCH Guards Are Color Coded & Numbered Guard Size Paint Color Number Identification 12mm Gloss black Stamped with 5-digit product ID or a “2” on the bottom 14mm Burnt orange Stamped with 5-digit product ID or a “4” on the bottom 17mm Light gray Stamped with 5-digit product ID or a “7” on the bottom SCH Knife Connector Kits & Knifeback Product ID Description Price SCP083607 Connector bar with 1 extra bolt & insert $17.14 SCP080000 Connector bar with 3 extra sections, 1 extra bolt & insert $21.69 SCH Wear Plates Product ID Description Price SCP017011 Wear plate, 4mm, 2-hole, (brown) $3.24 SCP017012 Wear plate, 5mm, 2-hole, (blue) $3.89 SCP017013 Wear plate, 6mm, 2-hole, (black) $4.52 SCP017014 Wear plate, 4mm, 3-hole, (brown) $3.69 SCP017015 Wear plate, 5mm, 3-hole, (blue) $4.19 SCP017016 Wear plate, 6mm, 3-hole, (black) $4.70 SCP010741 Wear plate, 4mm, 4-hole, (brown) $4.07 SCP010742 Wear plate, 5mm, 4-hole, (blue) $4.52 SCP010743 Wear plate, 6mm, 4-hole, (black) $5.03 SCP010753 Wear plate, 5mm, 4-hole, double sided, (blue) $5.79 SCP010754 Wear plate, 6mm, 4-hole, double sided, (black) $6.30 Note: Number stamped on top of wear plate indicates thickness in millimeters. Color also indicates thickness. See above. SCH EasyCut II 2-Point Standard Guard Product ID Description Price SCP016538 12mm 2-point standard guard $19.30 SCP016539 14mm 2-point standard guard $19.30 SCP016540 17mm 2-point standard guard $19.30 SCH EasyCut II 2-Point Open Top Guard Product ID Description Price SCP016517 12mm 2-point open top guard $32.04 SCP016518 14mm 2-point open top guard $32.04 SCP016470 17mm 2-point open top guard $32.04 SCH EasyCut II 2-Point Head Guard Product ID Description Price SCP017573 17mm 2-point head guard, for Case-IH 1020* $35.10 *For most other models an open top guard can be used instead of a head guard. SCH EasyCut II 3-Point Standard Guard Product ID Description Price SCP016541 12mm 3-point standard guard $36.35 SCP016542 14mm 3-point standard guard $36.35 SCP016543 17mm 3-point standard guard $36.35 SCH Spacer Plates SCP015810 SCH spacer plate, 4mm, 2-hole (used with bridge roller) $2.36 SCP015811 SCH spacer plate, 4mm, 3-hole (used with bridge roller) $3.50 SCP015813 SCH spacer plate, 5mm, 2-hole (used with bridge roller) $2.36 SCP015814 SCH spacer plate, 5mm, 3-hole (used with bridge roller) $3.50 SCP015816 SCH spacer plate, 6mm, 2-hole (used with bridge roller) $2.36 SCP015817 SCH spacer plate, 6mm, 3-hole (used with bridge roller) $3.50 SCP083789 SCH spacer plate, 8mm, 2-hole (used with bridge roller) $2.90 SCP083790 SCH spacer plate, 8mm, 3-hole (used with bridge roller) $5.09 SCH Croplifters Product ID Description Price SCP114927 SCH ASX-100 croplifter; guards that are 5.7 - 6.0” long; SCH EasyCut I only $21.64 SCP016445 SCH ASK-100 croplifter; guards that are 5.7 - 6.0” long; SCH EasyCut I & II $26.64 SCP016588 SCH ASK-121 croplifter; guards that are 5.75 - 6.125” long $26.64 SCP016587 SCH ASK-120 croplifter; guards that are 6.1 - 6.4” long $26.64 SCP016589 SCH ASK-127 croplifter; guards that are 6.5 - 6.7” long $26.64 SCP010142 SCH AS-100/2 croplifter; JD 600 series rigid & draper, 900 series draper with 4” OEM long guards; H213405, H229539 $26.64 SCP013549 SCH AS-100/5 croplifter; JD 200, 900 series auger platforms with OEM guards, H113571, H145791, H153719, H171031 $26.64 SCP010658 SCH spool fastener, required to install croplifters $1.60 Note: Croplifters for other guards not listed above may be available. Call with measurement from tip of guard point to the center of the guard bolt hole for correct fit. SCH Bridge Rollers Product ID Description Price SCP015768 SCH bridge roller, bottom. Introduced in 2007; bolts on top of guard and edge of roller rides on bottom of the section $13.98 SCP016330 SCH bridge roller, top. Introduced in 2010; bolts on top of guard and edge of roller rides on top of section. $13.98 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 63 SCH Guard Hardware Product ID Description Price Product ID Description Price HDW210118 HHCS, 3/8”-16 x 1-1/4” $0.17 HDW210221 HHCS, 10-1.5mm x 40mm $0.20 HDW210117 HHCS, 3/8”-16 x 1-1/2” $0.18 HDW210222 HHCS, 10-1.5mm x 45mm $0.28 HDW210119 HHCS, 3/8”-16 x 1-3/4” $0.20 HDW210223 HHCS, 10-1.5mm x 50mm $0.36 HDW210120 HHCS, 3/8”-16 x 2” $0.22 HDW210225 HHCS, 10-1.5mm x 60mm $0.48 HDW210122 HHCS, 3/8”-16 x 2-1/4” $0.26 HDW210224 HHCS, 10-1.5mm x 70mm $0.60 HDW210121 HHCS, 3/8”-16 x 2-1/2” $0.30 HDW220002 Carriage bolt, 10-1.5mm x 40mm $0.40 HDW210124 HHCS, 3/8”-16 x 3” $0.32 HDW220015 Carriage bolt, 10-1.5mm x 45mm $0.45 HDW210159 Nut, serrated flange, 3/8”-16 $0.06 HDW220016 Carriage bolt, 10-1.5mm x 50mm $0.50 HDW210184 Washer, USS flat, 3/8” $0.03 HDW220027 Carriage bolt, 10-1.5mm x 55mm $0.60 HDW210183 Washer, SAE flat, 3/8” $0.02 HDW220003 Nut, flange, 10-1.5mm $0.10 sCH easyCuT ii ParTs 16mm Nut Machined Washer Guard Tip Ball Splice Kit Knifehead Center Guard Overlap Strap Knife Hardware SCH Inserts Product ID Description Price SCP010937 Insert, for splice kit $0.70 SCP010941 Insert, for knifehead $0.64 SCH Skid Plates SCH Knife Hardware Product ID Description Price SCP010931 Bolt, 6mm x 16mm, for section $0.29 SCP010067 Bolt, 6mm x 18mm, for knifehead & splice $0.26 SCP083610 Bolt, 6mm x 20mm, for knifehead $0.30 SCP010071 Bolt, 6mm x 25mm, for knifehead $0.35 SCP010072 Bolt, 6mm x 28mm, for knifehead $0.38 SCP013961 Nut, flange, 6mm $0.15 SCP083611 Screw, 1/4” x 1” flat head, for H/C 2 piece head $0.33 SCP083612 Nut, 1/4”-20 center lock, for H/C 2 piece head $0.11 SCH Miscellaneous Parts Product ID Description Price SCP010050 Nut, 16mm for ball joint knifeheads $2.61 SCP010660 Washer, for ball joint knifeheads $1.91 SCP083613 Bottom strap for H/C 2-piece head $45.14 SCP010630 Guard tip ball $1.21 SCH Skid Plates Product ID Description Price SCP082817 Skid Plate, fits model year 2006 and after, MacDon 973, 974, FD60, FD70, D60; Case-IH 2052, 2062, 2152, 2162; Required when installing SCH EasyCut on these headers. $12.75 sCH Pro flex lifter Schumacher pulse crop lifters combine simple design with durability for your easy pulse crop harvest: • Compact design and easy mounting • Guarantees tight fit on all types of guards (long slot) • Length and angle of lifter finger is fully adjustable to allow for optimal work- ing conditions • White color of lifter finger provides maximum visibility in all crop conditions • High quality material ensures extended durability of the lifter finger • Specially designed for down edible beans, lentils, peas and other short crops With the specially designed slot, the PRO FLEX lifter can fit perfectly on most types of guards. That’s why the SCH pulse lifter guarantees a tight fit. Product ID Description Price SCP017646 SCH Pro Flex Lifter, with spacer 52.23 SCP017937 Replacement Finger 8.90 SCP080178 Package of 25, hardware kit * 19.50 SCP080179 Package of 25, hardware kit * 16.00 SCP080181 Package of 25, hardware kit * 23.25 * Hardware kit is required for installation. Determined by make and model of guard. PRO FLEX lifter will fit Schumacher guards as well as most forged guards SCH Double Drive Parts Product ID Description Price SCP010045 Bolt, countersunk, 6mm x 16mm $0.22 SCP010071 Bolt, 6mm x 25mm, for knifehead $0.35 SCP016519 12mm 2-point open top center guard $32.04 SCP016520 14mm 2-point open top center guard $32.04 SCP016469 17mm 2-point open top center guard $32.04 SCP013666 Overlap strap, 2 sections $22.56 SCP013665 Overlap strap, 3 sections $23.84 SCP013961 Nut, flange, 6mm $0.15 SCP016222 Section, countersunk, fine $2.87 SCP016223 Section, countersunk, coarse $2.87 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.64 sCH easyCuT ii KnifeHeads SCH Hardware Kits for Knifeheads Product ID Description Price SCP083601 Parts package, for knifeheads with top strap $4.14 SCP083784 Parts package, for knifeheads without top strap $4.14 AGCO Product ID Description Price SCP081363 AGCO, 5100 draper, LH $146.82 SCP013997 AGCO, 300 series flex, late model, LH 400 series rigid, LH 500, 800, 8000 series flex; 7/8” tie rod style, LH Note: Replaces OEM knifeheads with adjustable register $107.32 SCP011222 AGCO, 300 series flex, late model, LH 400 series rigid, LH 500, 800, 8000 series flex; 3/4” tie rod style, LH Note: Replaces OEM knifeheads with adjustable register $107.32 SCP011195 AGCO, 300 series flex, early model bushing style, 300 & 700 rigid, LH $117.20 SCP011252 AGCO, Hart Carter Series 2 floating cutter bar, LH $117.20 SCP011279 AGCO, Hiniker floating cutter bar, LH $146.82 SCP011266 AGCO, crank arm style, rigid, LH $117.20 Case-IH Product ID Description Price SCP002401 Case-IH, 3020, LH $253.98 SCP002896 Case-IH, 3020, double drive, RH $253.98 SCP081379 Case-IH, 2162, flex draper, LH $94.98 SCP081380 Case-IH, 2162, flex draper, double drive, RH $94.98 SCP013667 Case-IH, 2152, rigid draper, LH $102.39 SCP013668 Case-IH, 2152, rigid draper, double drive, RH $102.39 SCP081373 Case-IH, 2062, flex draper, LH $94.98 SCP081381 Case-IH, 2062, flex draper, double drive, RH $94.98 SCP083815 Case-IH, 2020, S/N CBJ021301 and after, LH $94.98 SCP083816 Case-IH, 2020, S/N CBJ021301 and after, double drive, RH $94.98 SCP011213 Case-IH, 2020, S/N all “HAJ” & up to CBJ021301, LH $94.98 SCP011214 Case-IH, 2020, S/N all “HAJ” & up to CBJ021301, double drive, RH $94.98 SCP083792 Case-IH, 2020, double drive early style, LH $94.98 SCP083793 Case-IH, 2020, double drive early style, double drive, RH $94.98 Case-IH - Continued Product ID Description Price SCP014266 Case-IH, 1010, 1020, LH $146.82 SCP011226 Case-IH, 820, LH $117.20 SCP011227 Case-IH, 810, 5-1/4” from center of knifehead bearing to center of first full section, LH $117.20 SCP011252 Case-IH, 810, 4-1/4” from center of knifehead bearing to center of first full section, LH $117.20 SCP011185 Case-IH, 230, 1190, 4000, 5000, LH $146.82 SCP011259 Case-IH, 990, LH $117.20 SCP011186 Case-IH, 1490, 1590, LH $146.82 SCP015474 Case-IH, 8220, 8330, 8340, 8360, 8370, 8820, 8830, SC414, LH $94.98 SCP015475 Case-IH, 8220, 8330, 8340, 8360, 8370, 8820, 8830, SC414, double drive, RH $94.98 Claas Product ID Description Price SCP016326 Claas, 8450, 8460, 20’ and more, bearing not included, LH $192.70 SCP015949 Claas, bearing for SCP016326 knifehead $139.75 SCP011125 Claas 642, 8450, 8460, S450, 15’ and less, bearing not included, LH $132.01 SCP011127 Claas, bearing for SCP011125 knifehead $120.42 SCP011252 Claas, Hart Carter Series 2 floating cutter bar, LH $117.20 Gehl Product ID Description Price SCP083618 Gehl, 1070, 1090, LH $94.98 SCP011229 Gehl, 2230, 2650, 2850, LH $102.39 Hesston Product ID Description Price SCP013668 Hesston, 9300, lap double drive, RH $102.39 SCP081363 Hesston, 5200 draper, LH $146.82 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 65 sCH easyCuT ii KnifeHeads SCH Hardware Kits for Knifeheads Product ID Description Price SCP083601 Parts package, for knifeheads with top strap $4.14 SCP083784 Parts package, for knifeheads without top strap $4.14 Hesston - Continued Product ID Description Price SCP014534 Hesston, 500, 520, 1070, 1071, 1085, 1090, 1091, 1095, 1110, 1150, 6450, 6455, 6465, 6550, 6655, 6665, LH $94.98 SCP014535 Hesston, 1014+2, 6450, 6455, 6550, 6655, 6665, double drive, RH $94.98 SCP083616 Hesston, 1170, 1275, 1160, 8400, 8450, 8840, 8870 LH $94.98 SCP083617 Hesston, 1170, 1275, 8400, 8450, 8840, 8870, double drive, RH $94.98 SCP011229 Hesston, 320, 420, 1014, 1260, 1265, 6400, 6600, 6610, LH $102.39 SCP011258 Hesston, 600, 1010, PT-7, PT-10, LH $94.98 SCP015474 Hesston, 1120, 1160, 8100, 8200, 8400, LH $94.98 SCP015475 Hesston, 1120, 1160, 8100, 8200, 8400, double drive, RH $94.98 Honey Bee Product ID Description Price SCP014226 Honey Bee, model year 2002-current, LH $146.82 SCP014227 Honey Bee, model year 2002-current, double drive, RH $146.82 John Deere Product ID Description Price SCP081352 John Deere, 900 series draper, LH $146.82 SCP015421 John Deere, 600 series flex, LH $146.82 SCP011207 John Deere, 200 & 900 series flex & rigid, LH $146.82 SCP011121 John Deere, crank arm style, rigid, bearing not included, LH $94.98 SCP011122 John Deere, bearing for SCP011121 knifehead $151.23 SCP011196 John Deere, 130, 300, 1207, 1209, 1219, 1380, 1424, bushing style (serial #285000-), LH $102.39 SCP011197 John Deere, 300 double drives, bushing style (serial #285000-), double drive, RH $102.39 SCP015427 John Deere, 130, 160, 230, 300, 710, 720, 820, 890, 895, 1207, 1209, 1219, 1380, 1424, 1600, 2280, 2320, 2420, needle bearing style, LH $94.98 SCP081378 John Deere, 300, 890, 895, 1600 double drives, needle bearing style, double drive, RH $94.98 John Deere - Continued Product ID Description Price SCP011220 John Deere, 78, 220, 230, 485, 710, 800, 830, 880, 1207, 1209, 2250, 2270, ball joint style (serial # -285000), LH $146.82 SCP083663 John Deere, 250, 350, 450, 3700, LH $94.98 SCP015428 John Deere 2360, LH $94.98 Lexion Product ID Description Price SCP002413 Lexion, F535, F540, LH $253.98 SCP002412 Lexion, F535, F540, double drive, RH $253.98 MacDon Product ID Description Price SCP081379 MacDon, FD70, FD75, LH $94.98 SCP081380 MacDon, FD70, FD75, double drive, RH $94.98 SCP081373 MacDon, 974, LH $94.98 SCP081381 MacDon, 974, double drive, RH $94.98 SCP013667 MacDon, 972, 5000, 5010, 5020, D60, LH $102.39 SCP013668 MacDon, 972, D60, double drive, RH $102.39 SCP015428 MacDon, 910, 920 lap double drive, 942, 960, 973, 7000, LH $94.98 SCP081351 MacDon, 920 lap double drive, 942 double drive, RH $94.98 SCP015427 MacDon, 920, LH $94.98 SCP081378 MacDon, 920, double drive, RH $94.98 Massey-Ferguson Product ID Description Price SCP011255 Massey-Ferguson, 8560, 8920, 9300, 9520, 9750, Rotary, LH $132.01 SCP016326 Massey-Ferguson, 8450, 8460, 20’ and more, bearing not included, LH $192.70 SCP015949 Massey-Ferguson, bearing for SCP016326 knifehead $139.75 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.66 SCH Hardware Kits for Knifeheads Product ID Description Price SCP083601 Parts package, for knifeheads with top strap $4.14 SCP083784 Parts package, for knifeheads without top strap $4.14 sCH easyCuT ii KnifeHeads Massey-Ferguson Product ID Description Price SCP011125 Massey-Ferguson, 642, 8450, 8460, S450, 15’ and less, bearing not included, LH $132.01 SCP011127 Massey-Ferguson, bearing for SCP011125 knifehead $120.42 SCP011211 Massey-Ferguson, Hart Carter & Hiniker floating cutter bar, knifehead bushing at 0-degree angle, LH Note: For replacement only. New kits will reuse the OEM knifehead. $146.82 SCP011212 Massey-Ferguson, Hart Carter & Hiniker floating cutter bar, knifehead bushing at 5-degree angle, LH Note: For replacement only. New kits will reuse the OEM knifehead. $146.82 SCP011263 Massey-Ferguson, 725, 925, LH $117.20 SCP011188 Massey-Ferguson, 655, 675, 775, 785, LH $86.34 SCP081363 Massey-Ferguson, 220 windrower, LH $146.82 New Holland Product ID Description Price SCP002401 New Holland, 740CF, LH $253.98 SCP002896 New Holland, 740CF, double drive, RH $253.98 SCP011213 New Holland, 73C; 74C S/N all “HAJ” & up to PNL018301; 970, 971, 972, 973, LH $94.98 SCP011214 New Holland, 73C; 74C S/N all “HAJ” & up to PNL018301; 970, 971, 972, 973, double drive, RH $94.98 SCP083815 New Holland, 74C S/N PNL018301 and after, double drives, LH $94.98 SCP083816 New Holland, 74C S/N PNL018301 and after, double drive, RH $94.98 SCP011191 New Holland, 474, 489, 492, 1465, LH $94.98 SCP011192 New Holland, 472, 477, 478, 479, 488, LH $94.98 SCP083678 New Holland, 114 windrower, LH $111.03 SCP083679 New Holland, 114 windrower, double drive, RH $111.03 SCP011276 New Holland, 116, 910, 912, 1100, 1112, 1114, 1116, 1118, LH $86.34 New Holland - Continued Product ID Description Price SCP011277 New Holland, 116, 910, 912, 1112, 1114, 1116, 1118, double drive, RH $86.34 SCP011219 New Holland, 461, 467, 469, 490, LH $94.98 SCP011224 New Holland, 495, 1495, LH $94.98 SCP083614 New Holland, 1475, 2216, 2300, 2326, 2450, 2550, LH $94.98 SCP083615 New Holland, 1475, 2216, 2300, 2326, 2450, 2550, double drive, RH $94.98 Owatonna Product ID Description Price SCP011280 Owatonna, 200, 206, 217, 235, 260, 265, 270, 275, 285, 7/8-18 threads per inch, LH $102.39 SCP011281 Owatonna, 260, 280, 7/8-14 threads per inch, LH $102.39 Versatile Product ID Description Price SCP083677 Versatile, 4030, LH $94.98 SCP083680 Versatile, 4030, double drive, RH $94.98 SCP011193 Versatile, 10, 400, 3-1/2” from center of knifehead bearing to center of first full section, LH $86.34 SCP011217 Versatile, 400, 4400, 3” from center of knifehead bearing to center of first full section, LH $86.34 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 67 Comparison of SCH Pro-Drive to conventional cutterbar knife drives Almost all conventional cutterbar knife drives in combine harvesters have a knife stroke of between 3” and 3-1/3”. When a crop that is difficult to cut loads the cutting knife, the knife rarely travels the full length of the stroke. A considerable amount of the stroke is lost in deflecting gear housings, gear brackets, ball and socket joints and installed wobble boxes. Drives have been tested in which the stroke has fallen to 2-1/2” under load. The knocking and shaking this produces in the cutterbar is known to almost every expert in the field. It gives the impression that dull sections are being used. The SCH Pro-Drive high performance cutterbar knife drive eliminates all these problems. Built using planetary gears, these drives produce an absolutely linear knife movement when compared with wobble boxes or other oscillating and pendulum drives. The gears are in exact alignment with the knife. This means there is no need for reversing or oscillating levers, which causes the loss of stroke in other drives. The full length of the stroke generated by the planetary gears is transmitted to the knife. The SCH Pro-Drive high performance knife drives can be driven either horizontally or vertically. Advantages of SCH Pro-Drive to conventional cutterbar knife drives The SCH Pro-Drive high performance knife drive in conjunction with the uniquely simple SCH cutterbar system achieve cutting performances that had never been considered possible in the past, particularly in the case of self-propelled harvesters. The Pro-Drive planetary gear system is in rotation at all times. Therefore, there are no dead spots as in wobble or crank drives where arms and levers have to come to a full stop twice per revolution to change direction. These advantages mean that a change to a SCH Pro-Drive knife drive and cutterbar system will pay for itself in just a short time. Changing knives with the SCH Pro-Drive The engineers have devised a brilliant method of attaching the knifehead to the drive that is a major advancement. Designed as a trapezoidal claw, the connection is easy and accurate. No bolts to line up, no bearings to adjust or shim, no fear that dirt might get into bearings, bushings, etc. Makes changing knives even in the field a breeze. Overstroke in the SCH Pro-Drive. The special construction of the planetary drive results in a precisely defined knife stroke. With a stroke of 85mm or 3-1/3” there is an overstroke of 4.4mm or 1/6” to either side. • Higher ground travel cutting speeds • Improved material flow with less reel work • Low maintenance • Minimal wear and easy service • Less plugging with “reverse gear” not used as often • Longer harvesting days, crops can be cut when there is dew on the ground • Very easy knife change, remove two bolts for easy in-the-field changes • Grease lubricated, eliminates the possibility of oil loss due to seal failure The problem most knife drives have, is the loss of stroke length and force. This is addressed with the SCH ProDrive. sCH Pro-driVe Knife driVe 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.68 sCH Pro-driVe Knife driVe Vertical Pro-Drive John Deere Flex Mounting Bracket Pro-Drive Knifeheads Case-IH Flex Mounting Bracket Bearing Block Assembly SCH Pro-Drive Product ID Description Price SCP014869 SCH Pro-Drive 85V, vertical, 85mm (3.3”) stroke $1,625.00 SCP012457 SCH Pro-Drive 130V, vertical, 130mm (5.1”) stroke $1,825.00 SCP012466 SCH Pro-Drive 85H, horizontal, 85mm (3.3”) stroke $1,625.00 SCP012472 SCH Pro-Drive 130H, horizontal, 130mm (5.1”) stroke $1,625.00 SCP014714 SCH Pro-Drive 89V, vertical, 89mm (3.5”) stroke Replaces John Deere #DE19785 on 620F, 622F, 625F, 630F and 635F flex platforms & 622R, 625R and 630R rigid platforms. Note: Does not include pulley and knifehead bearing block assembly. $1,725.00 SCP014697 SCH Pro-Drive 89V, vertical, 89mm (3.5”) stroke Replaces John Deere #DE19786 on 925D, 930D, 936D draper platforms. Note: Does not include pulley and knifehead bearing block assembly. $1,725.00 SCP014811 SCH Pro-Drive 85V, vertical, 85mm (3.3”) stroke Replaces drive on AGCO & Massey-Ferguson 7200, 8200. Note: Does not include pulley and knifehead bearing block assembly. $1,725.00 Warranty: SCH Pro-Drives have a 1 year warranty on parts and labor from date in service. SCH Pulleys for Vertical Pro-Drive Product ID Description Price SCP012775 Pulley, 6-bolt, 180mm $152.55 SCP083744 Pulley, 6-bolt, 190mm $152.55 SCP012780 Pulley, 6-bolt, 200mm $152.55 SCP012782 Pulley, 6-bolt, 210mm $152.55 SCP012785 Pulley, 6-bolt, 220mm $152.55 SCP012788 Pulley, 6-bolt, 230mm $152.55 SCP012802 Pulley, 6-bolt, 240mm $152.55 SCP012579 Hub, required if replacing keyed pulley with 6-bolt pulley $45.26 SCH Adapters for Horizontal Pro-Drive Product ID Description Price SCP012573 Adapter, for 25.4mm (1”) shaft $68.01 SCP012563 Adapter, for 31.7mm (1-1/4”) shaft $68.01 SCP012564 Adapter, for 32.0mm shaft $68.01 SCH Knifeheads for Pro-Drive With SCH Cutter Bar Product ID Description Price SCP083748 Knifehead, Massey-White 9750 $146.82 SCP011339 Knifehead, John Deere flex and rigid $146.82 SCP011340 Knifehead, Case-IH flex and rigid $146.82 SCP011341 Knifehead, AGCO flex and rigid $146.82 SCH Knifeheads for Pro-Drive With OEM Cutter Bar Product ID Description Price SCP011236 Clamp, used to manufacture custom knifehead $45.14 SCP081353 Clamp, AGCO 300-800 series, 3/4” $60.38 SCP081354 Clamp, AGCO 300-800 series, 7/8” $60.38 SCP083629 Knifehead, Claas $146.82 SCP081355 Knifehead, Case-IH 3” system $146.82 SCP081357 Knifehead, John Deere flex and rigid $146.82 SCH Pro-Drive Miscellaneous Parts Product ID Description Price SCP010099 Bolt, 10mm x 35mm allen head $0.50 SCP010258 Bearing, for knifehead $95.29 SCP012543 Nylon ring, for Pro-Drive knifehead $8.84 SCP012766 Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; greaseable $151.23 SCP014739 Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; sealed bearing $151.23 SCP014742 Bearing block assembly, AGCO/MF 7200, 8200, 9250 (#71416424), JD Early 900D (#DE19373) $229.50 SCP014230 Bearing block assembly, JD 600F, 600R, JD Late 900D (#DE19294) $189.00 SCP082702 U-bracket, for John Deere flex mount $125.00 SCP082705 U-bracket, for AGCO flex mount $125.00 SCP083625 Mounting plate, used to manufacture custom bracket $68.01 SCP083626 Clevis, 16mm, for John Deere late 900 series $29.56 SCP083627 Clevis, 12mm, for John Deere early 900 series $29.56 SCP083628 Clevis, 1/2”, for John Deere 200 series $29.56 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 69 joHn deere sTabilizer KiT sCH Pro-driVe KiTs All SCH Pro-Drive Conversion Kits Include: • 1-SCH Pro-Drive, vertical, 85mm (3.3”) stroke • 1-mounting bracket for SCH Pro-Drive • 1-drive pulley for SCH Pro-Drive • 1-extra nylon ring for knifehead • 1-knifehead Size of the Bolt in the Clevis Warranty: SCH Pro-Drives have a 1 year warranty on parts and labor from date in service. Recommended for John Deere 25’ - 30’ Flex Heads to Reduce Vibration John Deere Stabilizer Kit Product ID Description Price SCP082802 Stabilizer kit, for John Deere 900 series flex heads $210.00 Stabilizer Replacement Parts Product ID Description Price SCP082706 Tie rod assembly $115.00 SCP082707 Bracket, anchor $17.00 SCP082708 Bracket, angle $118.00 SCP082709 “H” bracket $25.00 Case-IH 1010, 1020 Series Headers With SCH Cutter Bar SCH Cutter Bar Price Description With CIH Cutter Bar CIH Cutter Bar Price SCK100130 $2,150.00 Flex, 1020, greaseable wobble box, S/N JJC0215000 and lower SCK100140 $2,150.00 SCK100131 $2,150.00 Fex, 1020, oil bath wobble box, S/N JJC0215001 - JJC0323604 SCK100141 $2,150.00 SCK100132 $2,150.00 Flex 1020, oil bath wobble box, S/N JJC0323605 and up; CBJ023001 and up SCK100142 $2,150.00 SCK100133 $2,100.00 Rigid, 1010 SCK100143 $2,100.00 Note: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will be added to the above kit price and credited back if a runner is returned in useable condition. AGCO 300-8000 Series Headers With SCH Cutter Bar SCH Cutter Bar Price Description With AGCO Cutter Bar AGCO Cutter Bar Price SCK100150 $2,150.00 Flex, 300-8000 Series SCK100155 $2,100.00 Note: Please specify the tie rod bolt size (3/4” or 7/8”) with AGCO cutter bar. Massey-White 9750 Series Headers With SCH Cutter Bar SCH Cutter Bar Price Description With M/F Cutter Bar M/F Cutter Bar Price SCK100160 $2,150.00 Flex, 9750 series SCK100162 $2,100.00 Note: Knifehead for Massey-White cutting system is not available. A knifehead clamp is provided that must be welded to original knifehead strap. John Deere 200-900 Series Headers With SCH Cutter Bar SCH Cutter Bar Price Description With JD Cutter Bar JD Cutter Bar Price SCK100100 $2,150.00 Flex, 4420, 6620 & 7720 through 1985 with 1/2” clevis* Flex, 9000 Series with 1/2” clevis* SCK100110 $2,150.00 SCK100101 $2,150.00 Flex, 6620 & 7720 after 1985 with 1/2” clevis* Flex, 8820 with 1/2” clevis* SCK100111 $2,150.00 SCK100102 $2,150.00 Flex, 4420, 6620 & 7720 through 1985 with 12mm clevis* Flex, 9000 Series with 12mm clevis* SCK100112 $2,150.00 SCK100103 $2,150.00 Flex, 6620 & 7720 after 1985 with 12mm clevis* Flex 8820 with 12mm clevis* SCK100113 $2,150.00 SCK100104 $2,150.00 Flex, 4420, 6620 & 7720 through 1985 with 16mm clevis* Flex, 9000 Series with 16mm clevis* SCK100114 $2,150.00 SCK100105 $2,150.00 Flex, 6620 & 7720 after 1985 with 16mm clevis* Flex, 8820 with 16mm clevis* SCK100115 $2,150.00 SCK100106 $2,100.00 Rigid, 4420, 6620 & 7720 through 1985 Rigid, 9000 Series SCK100116 $2,100.00 SCK100107 $2,100.00 Rigid, 6620 & 7720 after 1985 Rigid, 8820 SCK100117 $2,100.00 *The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.70 rassPe Knife asseMbiles • UPS Shippable • Hardware is included • OEM quality parts • Available with Coarse or Fine Sections Rasspe OEM Replacement Sectional Knife Assemblies John Deere 200 & 900 Series with 3” Knife Sections Product ID Description Price RSP052094 Knifehead, John Deere 200 & 900 series, replaces AH121075, KXE10217 $59.95 RSP080019 Knife Assembly, John Deere 218, 918, w/ knifehead, 11-SPI sections $293.80 RSP080020 Knife Assembly, John Deere 220, 920, w/ knifehead, 11-SPI sections $316.08 RSP080021 Knife Assembly, John Deere 222, 922, w/ knifehead, 11-SPI sections $336.55 RSP080022 Knife Assembly, John Deere 224, 924, w/ knifehead, 11-SPI sections $356.97 RSP080023 Knife Assembly, John Deere 225, 925, w/ knifehead, 11-SPI sections $385.43 RSP080024 Knife Assembly, John Deere 230, 930, w/ knifehead, 11-SPI sections $434.80 RSP080040 Connector Kit, John Deere 200 & 900 series, 11-SPI sections $22.50 RSP080044 Knife Assembly, John Deere 218, 918, w/ knifehead, 7-SPI sections $293.80 RSP080045 Knife Assembly, John Deere 220, 920, w/ knifehead, 7-SPI sections $316.08 RSP080046 Knife Assembly, John Deere 222, 922, w/ knifehead, 7-SPI sections $336.55 RSP080047 Knife Assembly, John Deere 224, 924, w/ knifehead, 7-SPI sections $356.97 RSP080048 Knife Assembly, John Deere 225, 925, w/ knifehead, 7-SPI sections $385.43 RSP080049 Knife Assembly, John Deere 230, 930, w/ knifehead, 7-SPI sections $434.80 RSP080057 Connector Kit, John Deere 200 & 900 series, 7-SPI sections $22.50 Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (11-SPI) is recommended for wheat & grasses. Rasspe OEM Replacement Sectional Knife Assemblies John Deere 600 Series with 4” Knife Sections Product ID Description Price RSP002559 Knifehead, John Deere 600 series, replaces AH220051 $82.50 RSP080059 Knife Assembly, John Deere 620, w/o knifehead, 14-SPI sections $368.55 RSP080060 Knife Assembly, John Deere 625, w/o knifehead, 14-SPI sections $467.75 RSP080061 Knife Assembly, John Deere 630, w/o knifehead, 14-SPI sections $581.17 RSP080062 Knife Assembly, John Deere 635, w/o knifehead, 14-SPI sections $666.17 RSP080076 Connector Kit, John Deere 600 series, 14-SPI sections $32.50 RSP080084 Knife Assembly, John Deere 620, w/o knifehead, 7-SPI sections $368.55 RSP080085 Knife Assembly, John Deere 625, w/o knifehead, 7-SPI sections $467.75 RSP080086 Knife Assembly, John Deere 630, w/o knifehead, 7-SPI sections $581.17 RSP080087 Knife Assembly, John Deere 635, w/o knifehead, 7-SPI sections $666.17 RSP080094 Connector Kit, John Deere 600 series, 7-SPI sections $32.50 Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (14-SPI) is recommended for wheat & grasses. Rasspe OEM Replacement Sectional Knife Assemblies Case-IH 1010 & 1020 Series Product ID Description Price RSP051520 Knifehead, Case-IH 1010 & 1020 series $93.18 RSP080159 Knife Assembly, Case-IH 1010 & 1020 series, 17.5’ $328.00 RSP080160 Knife Assembly, Case-IH 1010 & 1020 series, 20’ $359.47 RSP080161 Knife Assembly, Case-IH 1010 & 1020 series, 22.5’ $395.83 RSP080162 Knife Assembly, Case-IH 1010 & 1020 series, 25’ $400.63 RSP080163 Knife Assembly, Case-IH 1010 & 1020 series, 30’ $473.67 RSP080174 Connect Kit, Case-IH 1010 & 1020 series, 9-SPI sections $22.50 Rasspe AGCO OEM Replacement Sections Product ID OEM Part Number Description Price SCP011003 71135135, 71348175 Box of 25, AGCO coarse section, 7 serrations per inch $34.95 SCP011001 71135135, 71348175 Box of 25, AGCO fine section, 10 serrations per inch $34.95 Rasspe Case-IH OEM Replacement Sections Product ID OEM Part Number Description Price RSP080140 112074A1 Box of 25, Case-IH section, 9 serrations per inch $29.25 Rasspe John Deere OEM 3” Replacement Sections Product ID OEM Part Number Description Price RSP010992 H160251, H168316, H207930 Box of 25, John Deere 3” coarse section, 7 serrations per inch. John Deere, 200, 900 series with 3” cutting system $29.25 RSP080017 H136807, H207929 Box of 25, John Deere 3” fine section, 14 serrations per inch. John Deere, 200, 900 series with 3” cutting system $29.25 Rasspe John Deere OEM 4” Replacement Sections Product ID OEM Part Number Description Price RSP080010 H163131 Box of 25, John Deere 4” coarse section, 7 serrations per inch John Deere, 900 draper, 600 draper, 600 flex & rigid, 600 flex draper with 4” cutting system $56.25 RSP080011 H153329 Box of 25, John Deere 4” fine section, 14 serrations per inch John Deere, 900 draper, 600 draper, 600 flex & rigid, 600 flex draper with 4” cutting system $56.25 Rasspe New Holland OEM Replacement Sections Product ID OEM Part Number Description Price SCP011007 848091 Box of 25, New Holland coarse section, 7 serrations per inch $34.95 SCP011005 848091 Box of 25, New Holland fne section, 10 serrations per inch $34.95 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 71 Rasspe AGCO OEM Replacement Guards Product ID OEM # Description Price RSP122500 71341601, 71116504 71386962 Guard, 2-point, double hardened AGCO early model non-floating, all AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250 $8.55 Rasspe Case-IH OEM Replacement Guards Product ID OEM # Description Price RSP127000 613838R2 187350A1 Guard, 2-point with trash bar, double hardened Case-IH 820, 1010, 1020 $11.75 RSP129901 1307299C2 334305A1 Guard, 2-point without trash bar, double hardened Case-IH 1010, 1020; 2010, 2020 SN #CBJ020001 & up $11.45 RSP121501 86615982 700707147 Guard, 2-point with trash bar, 4-1/4” long, double hardened Case-IH 2010, 2020 prior to SN #CBJ020000 & all SN #HAJ $11.75 RSP121000 1326787C3, 483500R3 187346A1 Guard, 2-point head guard with trash bar, double hardened Case-IH 820, 1010, 1020; 3 used on drive end $10.00 Rasspe John Deere OEM Replacement Guards Product ID OEM # Description Price RSP124001 H113571, H145791 H153719, H171031 Guard, 2-point, 3” cutting system, double hardened John Deere 200, 900 series rigid & flex headers $12.60 RSP134000 H25603, H171032 H153855 Guard, 3-point, 3” cutting systems John Deere 200, 900 series rigid & flex headers $15.75 RSP133981 H213398 H229537 Guard, 3-point, long-short-long, 4” standard blunt point, double hardened John Deere, 600 series flex & flex draper $14.35 RSP135071 H213507 H229538 Guard, 3-point, short-long-short, 4” standard blunt point, double hardened John Deere 600 series flex & flex draper $14.35 RSP187021 H218702 Guard, 3-point, long-short-long, 4” no-till blunt point, double hardened John Deere 600 series flex headers; for no-till, guard doesn’t have a cross bar $12.25 RSP187011 H218701 Guard, 3-point, short-long-short, 4” no-till blunt point, double hardened John Deere 600 series flex headers; for no-till, guard doesn’t have a cross bar $12.25 RSP134051 H213405 H229539 Guard, 3-point, long-short-long, 4” long point, double hardened John Deere, 600 series rigid & draper; 900 series draper $13.30 RSP135081 H213508 H229540 Guard, 3-point, short-long-short, 4” long point, double hardened John Deere, 600 series rigid & draper; 900 series draper $13.30 RSP187030 H218703 Guard, 3-point, long-long-long, non-clog, 4” John Deere, 600 series rigid, flex and draper; 900 series draper Used in conditions where crop gets tangled; guard doesn’t have a cross bar $12.60 rassPe guards 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.72 YOUR SMART-TILL PARTS SERVICE CENTER We are now stocking replacement tines, bearings and other wear items for the HCC Smart-Till residue management tool. boule CrisTal sTrobe ligHT A High Quality, Unbreakable, Flexible & Rotating Strobe Light for Agricultural Equipment • Single voltage power supply • Flexible rubber base • Vibration proof and watertight • Unbreakable polycarbonate dome • Fast, clamp mounting • Worm gear drive • Metallized steel reflector with balance counterweight and stepped device for manual rotation • Radio interference filter Bracket F Bracket B Bracket R Unbreakable & flexible rotating beacon Product ID Description Price LGT010000 Boule Cristal light, bracket sold separately $79.95 LGT020000 Mounting bracket, “B” style $9.95 LGT020010 Mounting bracket, “F” style $9.95 LGT020020 Mounting bracket, “R” style $9.95 LGT029000 Halogen bulb $9.95 HCC Smart-Till Replacement Parts Product ID Description Notes Price HCC202925 Bolt for Tine 2 required per tine $3.12 HCC212500 Lock Nut for Tine 2 required per tine $1.07 HCC226334 Heavy Duty Spindle & Hub Assembly $197.57 HCC231250 Tine, Left Hand Carriage Casting Mark: LF/RR $24.95 HCC231251 Tine, Right Hand Carriage Casting Mark: RF/LR $24.95 HCC243750 Pillow Block Bearing $69.65 HCC553001 Roller Thrust Plate $4.88 HCC553237 C-Flex, 1” x 3”, 3-Hole For 2010 and newer models; beginning with serial number 310xxx $96.75 HCC553238 Rock Guard $51.68 HCC553239 Retainer for Rock Guard $16.76 HCC853092 C-Flex, 1” x 3”, 4-Hole For 2009 and earlier models; serial number prior to 310xxx $119.12 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 73 100% Stainless Steel Multi-Purpose Tools with 25 Year Guarantee The stainless steel Leatherman Tool stands alone above the crowd of multi- purpose tools on the market today. It is designed for the individual with an eye for quality, ingenuity and elegance. The Leatherman Tool is more than a well-designed cutlery item. It is the most practical, useful and compact multi-purpose tool yet created. Whether you are buying for yourself or as a gift for a farmer, fisherman, camper, hunter, hiker or other outdoors enthusiast, you can make no finer, more appropriate choice than the Leatherman Tool. Wave Micra Fuse Charge XTi Surge leaTHerMan Tools TraCTor safeTy ligHTs • Designed to comply with Ohio’s lighting law • Breakaway extensions prevents damage to light bar and or tractor • Can be easily folded in for field operation and in close quarters • Adjustable width extensions that extend from 9-1/2’ up to 14’ • Adjustable width universal mounting brackets that fit most tractors with minimal modifications • Powder coat paint finish • Draws only 4.7 AMPS Universal Mounting Brackets Included Product ID Description Price LGT090000 Tractor safety light bar $357.00 Super Tool 300 THe PosTboxx Unique Design and Function - No Holes to Dig The Postboxx is the only patented and certified mailbox that is free standing using Sand or Gravel. Simply fill the pedestal with the desired ballast and you have an elegant mailbox that is safe and durable. Are You Tired of Having Your Mailbox Smashed? The Postboxx may possibly be the last mailbox you’ll ever buy. Made from high quality, sturdy, heavy impact polyethylene, this mailbox is able to withstand the toughest abuse. Sick of Looking at a Dingy, Unappealing Mailbox? The Postboxx is made to complement the beauty and charm of your home and comes in a variety of colors that never needs repainted. The Postboxx is made to withstand the elements and cleans easily, just wipe it or hose it off. Product ID Description Price PBX010000 Postboxx mailbox, black $89.99 PBX020000 Postboxx mailbox, estate brown $89.99 PBX030000 Postboxx mailbox, hunter green $89.99 PBX040000 Postboxx mailbox, stone gray $89.99 PBX050000 Postboxx mailbox, brick red $89.99 PBX060000 Postboxx mailbox, white $89.99 Leatherman Tools Product ID Description Price Notes LTH64010101 Micra Tool $20.00 Pocket size. LTH830024 Fuse with nylon sheath $40.00 Mid size. LTH831102 Super Tool 300 with leather sheath $75.00 Large tool. LTH830009 Charge Xti with leather sheath $80.00 Discontinued. Price reduced LTH830038 Wave with nylon sheath $90.00 Large tool. LTH830159 Surge with nylon sheath $100.00 Largest tool. 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.74 sCHuCK CusHion HiTCHes Model 750 Model 750 RT Model RTR Model 320 Model 340 Model 720 The Custom Hitch Advantage Save time and effort on every hook-up, and that means saving money for you. It eliminates the frustrating job of backing into an exact position for hookup. The telescoping, swivel cushion tongue extends out a full (7) seven inches beyond the “Tow” position and swivels 60o laterally (or 12” left to right) for fast, easy hook-ups. Model 740 Schuck 300 Series Hitches 750 lbs tongue weight, 20,000 lbs. pulling capacity For 1 or 2 axle trailers up to 10,000 lbs. Product ID Description Price SHU103100 Model 310 cushion hitch. Weld on (not shown) $189.00 SHU103200 Model 320 cushion hitch. Bolt on for 8-12” bolt pattern For factory bumpers with a flat mounting surface and all Schuck bumpers $208.00 SHU103400 Model 340 cushion hitch. For 2” receiver tube, includes pin and clip Note: Hitch can be turned over for a 4” tongue height difference $208.00 Schuck 700 Series Hitches 1,000 lbs tongue weight, 40,000 lbs. pulling capacity Requires 12” from center of bumper mounting holes to spare tire Product ID Description Price SHU107100 Model 710 cushion hitch. Weld on (not shown) $251.00 SHU107200 Model 720 cushion hitch. Bolt on for 8-12” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers $296.00 SHU107402 Model 740 cushion hitch. For 2” receiver tube, includes pin and clip Note: There is a 2-1/2” drop from center of receiver tube to top of tongue. $296.00 SHU107500 Model 750 cushion hitch with pullout swivel. Bolt on for 10-1/2” to 12” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers $498.00 SHU107505 Model 750RT cushion hitch with pullout swivel. For 2” receiver tube, includes pin and clip Note: There is a 5-1/2” drop from center of receiver tube to top of tongue. Tongue height should be 16-18” off the ground. Measure from center of receiver tube to ground and subtract the 5-1/2” drop. $498.00 SHU107507 Model 750RTR cushion hitch with pullout swivel. For 2” receiver tube, includes pin and clip Note: There is a 3-1/2” drop from center of receiver tube to top of tongue. Tongue height should be 16-18” off the ground. Measure from center of receiver tube to ground and subtract the 3-1/2” drop. $498.00 sWifT HiTCH PORTABLE WIRELESS BACK-UP CAMERA Swift Hitch Product ID Description Price TPL100000 Swift Hitch, SH02 259.00 New ProductQuickly hitch up any trailer, camper or snow plow with Swift Hitch: • Hi-Resolution Color Display • Camera with Magnetic Base • Water Resistant • Transmission Distance of 300 Feet • Night Vision Viewing Range of 15 Feet • Battery Run Time of 10 hours VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 75 Model 750 A A Urethane Tips “Compress” to Absorb Minor Shocks B Urethane Cushions “Compress” to Absorb Major Shocks B The Model 1000 Bumper is specifically designed for all pickup trucks. The 50,000 P.S.I. yield strength tubing makes this the strongest commercial bumper available. The bumper also requires a model specific mounting bracket, stone shield and a hitch to complete. Custom installation such as drilling holes or welding braces to frame may be required in some cases. Available in black only. sCHuCK CusHion HiTCHes sCHuCK buMPer Model 850 2” Receiver Tube Cushion & Bearing Replacement Kits Schuck Bumper Product ID Description Price SHU001000 Model 1000 heavy duty bumper Must order mounting brackets, stone shield and hitch to complete $389.00 Schuck 800 Series Hitches - For 2 Ton Trucks 2,000 lbs tongue weight, 50,000 lbs. pulling capacity Product ID Description Price SHU108100 Model 810 cushion hitch. Weld on (not shown) $320.00 SHU108200 Model 820 cushion hitch. Bolt on for 8-12” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers $399.00 SHU108400 Model 840 cushion hitch. For 2” receiver tube, includes pin and clip $399.00 SHU108500 Model 850 cushion hitch with pullout swivel Bolt on for 12-15” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers Requires 13-1/2” from center of bumper mounting holes to spare tire $690.00 Schuck Receiver Tube Product ID Description Price SHU100003 2” Receiver tube. For 8-12” bolt pattern, includes chain hooks and stiffening brackets $143.00 Schuck Parts & Accessories Product ID Description Price SHU900300 300 Series replacement kit; 2 cushions, 3 bearings $47.00 SHU900700 700 Series replacement kit; 4 cushions, 5 bearings $89.00 SHU900800 800 Series replacement kit; 6 cushions, 7 bearings $117.00 SHU900002 Cushion, 300, 700 series $14.00 SHU900003 Bearing, 300, 700 series $7.00 SHU900004 Cushion, 800 series $14.00 SHU900005 Bearing, 800 series $7.00 SHU900011 Replacement tongue, 300 series $48.00 SHU900012 Replacement tongue, 700 series $63.00 SHU900013 Replacement tongue, 800 series, one hole $103.00 SHU900010 Replacement tongue, 800 series, two holes $113.00 SHU900001 Stone shield, for Schuck bumper $58.00 SHU900014 Stiffening brackets; 20” long $30.45 Mounting brackets, for Schuck bumper; specify make, model and year $112.00 Swivel Tongue for quick, easy hook-ups 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.76 ergo HiTCH EgroTech, LLC is excited to announce the release of Ergo-Hitch, the self-align- ing, automatically locking hitch that will change the way you think about towing. If you think you’ve seen similar hitches in the past…THINK AGAIN You’ve never seen anything like the Ergo-Hitch. Originally and specifically designed for SAFETY when hooking grain and hay wagons to your tractor or truck, the Ergo-Hitch will become the most versatile hitch system on the market. Simply back up to your wagon or trailer and “Click” you’re hooked. Pull the release lever and “Click” you’re unhooked, no pins or clips to mess with. The Ergo-Hitch is automatically locked in the open position until your next hook up. Again, no pins or clips to mess with. Use the Ergo-Hitch alone or with the “Big Mouth” vertical alignment ramps and the “Tongue Tender” wagon tongue lift attachment for maximum versatility and safety. Use with the “Drawbar Adapter” to connect your Ergo-Hitch to any tractor drawbar. Also, available is the specially engineered “Ergo Ball” for all Class I-IV ball hitch towing needs. Ergo-Hitch weighs less than 30 lbs. and is only 2” thick offering a sleek look as well as protection for the internal mechanics. Decep- tively strong for its size, the Ergo-Hitch is rated at 40,000 lbs. of pulling capacity and 2,000 lbs. of tongue weight. Self-Aligning and Automatically Locking Hitch with True Multi-Purpose Capabilities. • Heavy duty hinged handle helps prevent damage and injury from disengaged pins • Large metal collar prevents handle damage and fallout • Spring-loaded locking pin on top eliminates loss of hair pin from field trash • Large handle provides more leverage for easy removal • Heavy duty powder coating resists corrosion and increases visibility • Certified 1045 cold drawn steel and heat treatment provides greater strength & wear The Safe and Easy Solution Product ID Description Price LEP010001 Lockease hitch pin, 3/4” x 6” $21.75 LEP010002 Lockease hitch pin, 7/8” x 6” $23.25 LEP010003 Lockease hitch pin, 1” x 6” $25.50 LEP010004 Lockease hitch pin, 1-1/8” x 7” $30.25 LEP010005 Lockease hitch pin, 1-1/4” x 7” $32.00 LEP010006 Lockease hitch pin, 1-1/2” x 8” $39.00 LEP010008 Lockease hitch pin, 3/4” x 4-1/2” $19.50 LEP010009 Lockease hitch pin, 7/8” x 4-1/2” $22.25 LEP010010 Lockease hitch pin, 5/8” x 4-1/2” $18.50 LEP080005 Lockease repair kit, includes thumb latch, spring & roll pin $6.50 loCKease HiTCH Pin Ergo Hitch Product ID Description Price ERH125000 Ergo Hitch, 2” Cushion Shank. For use with pins up to 1-1/4”. $299.00 ERH610000 Ergo Big Mouth, 7/8” Pin. Adds 4” of vertical alignment for easy hook up. $25.00 ERH620000 Ergo Big Mouth, 1-1/4” Pin. Adds 4” of vertical alignment for easy hook up. $25.00 ERH710000 Ergo Tongue Tender. Adjustable spring tension keeps tongue at correct height. $85.00 ERH810000 Ergo Drawbar Adapter. Connects Ergo Hitch to any drawbar. $65.00 ERH515000 Ergo Double Ball, 2” and 2-5/16” $105.00 VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 7777 MonTezuMa Toolboxes Montezuma Roller Cabinet & Top Chest Toolboxes Tool storage so advanced you will feel as though you are working in the future. Montezuma created this cutting edge tool storage system by combining the flexibility of a drawer toolbox with the efficiency and organization of their patented tool organization. This tool storage system will make you faster, more efficient, and keep you organized all the while placing your most used tools at your fingertips and giving you instant tool inventory at a glance. This tool storage system organizes the more difficult to organize sockets and combination end wrenches allowing the drawers to be used for the general tool storage. With its unique tool organization it utilizes more of its capacity for tools and occupies less of your valuable shop or garage space. Montezuma’s quality now comes in roller cabinets and top chest toolboxes that are easily transported within your shop. They are equipped with full extension ball bearing drawer slides and a resilient powder coat paint finish. Montezuma roller cabinets and top chests have brushed aluminum drawer pulls and corner trim and coded lock and keys. The top chests include gas springs for easy opening. Montezuma 72” Elite 17-Drawer Roller Cabinet Toolbox 72” wide x 30” deep x 46-1/4” high. Weighs 1,000 lbs. Product ID Vendor ID Description Price CPL721700 BK7217MZ 72” Elite 17-drawer roller cabinet toolbox, black $4,150.00 CPL721703 BU7217MZ 72” Elite 17-drawer roller cabinet toolbox, blue $4,150.00 Montezuma 72” 13-Drawer Top Chest Toolbox 71-1/2” wide x 29-1/2” deep x 23-1/8” high. Weighs 505 lbs. Product ID Vendor ID Description Price CPL721300 BK7213CH 72” 13-drawer top chest toolbox, black $2,250.00 CPL721303 BU7213CH 72” 13-drawer top chest toolbox, blue $2,250.00 Montezuma 56” Top Chest & Roller Cabinet Toolbox Product ID Vendor ID Description Price CPL560700 BK5607CH 56” 7-drawer top chest toolbox, black $795.00 CPL561100 BK5611TC 56” 11-drawer roller cabinet toolbox, black $1,195.00 Montezuma 41” Top Chest & Roller Cabinet Toolbox Product ID Vendor ID Description Price CPL410800 BK4108CH 41” 8-drawer top chest toolbox, black $545.00 CPL411100 BK4111TC 41” 11-drawer roller cabinet toolbox, black $830.00 Montezuma 36” Top Chest & Roller Cabinet Toolbox Product ID Vendor ID Description Price CPL360800 BK3608CH 36” 8-drawer top chest, black $510.00 CPL360610 BK3606TC 36” 6-drawer roller cabinet, black $740.00 Montezuma 26” Top Chest & Roller Cabinet Toolbox Product ID Vendor ID Description Price CPL260400 BK2604CH 26” 4-drawer top chest, black $375.00 CPL260600 BK2606TC 26” 6-drawer roller cabinet, black $595.00 Note: The 36” and 26” roller cabinets can also be used with the portable toolboxes on pages 78-79. 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.78 MonTezuMa Toolboxes Montezuma Portable Steel Toolbox 36” wide x 17-3/8” deep x 21-1/2” high. Weighs 91 lbs. Product ID Vendor ID Description Price CPL364500 XL450B Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, black $495.00 CPL364501 XL450R Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, red $495.00 Montezuma Portable Steel Toolbox 30” wide x 19” deep x 20-1/8” high. Weighs 89 lbs. Product ID Vendor ID Description Price CPL003100 LA400B Portable steel toolbox, 30” x 19” x 20-1/8”, black $475.00 CPL003101 LA400R Portable steel toolbox, 30” x 19” x 20-1/8”, red $475.00 CPL003102 LA400W Portable steel toolbox, 30” x 19” x 20-1/8”, white $475.00 Montezuma Portable Aluminum Toolbox 30” wide x 15” deep x 18-1/8” high. Weighs 51 lbs. Product ID Vendor ID Description Price CPL002203 ME300AL Portable aluminum toolbox, 30” x 15” x 18-1/8”, brite $450.00 CPL002204 ME300ALB Portable aluminum toolbox, 30” x 15” x 18-1/8”, black $450.00 CPL002205 ME300ALR Portable aluminum toolbox, 30” x 15” x 18-1/8”, red $450.00 CPL002206 ME300ALW Portable aluminum toolbox, 30” x 15” x 18-1/8”, white $450.00 Limited 5-Year Warranty All Montezuma toolboxes have a  Limited 5-Year Warranty  to the original user against defects in workmanship and material under normal use. This Limited 5-Year Warranty does not apply to products that have been misused, abused, damaged by accident or otherwise, subjected to abnormal use, used in any type of over the road use, or modified by anyone other than Montezuma Mfg., Inc.  During the applicable duration of the warranty, at its option  Montezuma Mfg., Inc.  will repair or replace its products which fail to give satisfactory performance due to defective workmanship or materials, or provide a refund by repaying or crediting with an amount equal to the purchase price of such products. Note: The 36” and 26” portable toolboxes can also be used with the roller cabinets on page 77. FEATURES: • 16 gauge steel or .100” thick tread aluminum construction • Welded seams, no spot welding • Holds metric and/or S.A.E. tools • Lid secures tools in position when closed • Gas spring raises lid when unlatched for easy tool access • Weather stripping creates a tight seal against dust and moisture • Chrome plated side handles on both sides of chest • Locking latch secures tools from unauthorized use • Lock cylinder has double-cut keys for easier locking and unlocking • Powder coated with a tough, scratch resistance, textured, powder paint • Full width wrap around aluminum drawer pull • Premium drawer liner • Tool inventory at a glance VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICING www.sidist.com 7979 Montezuma Portable Steel Toolbox 30” wide x 15” deep x 18-1/8” high. Weighs 65 lbs. Product ID Vendor ID Description Price CPL002200 ME300B Portable steel toolbox, 30” x 15” x 18-1/8”, black $375.00 CPL002201 ME300R Portable steel toolbox, 30” x 15” x 18-1/8”, red $375.00 CPL002202 ME300W Portable steel toolbox, 30” x 15” x 18-1/8”, white $375.00 Montezuma Portable Steel Toolbox 26” wide x 17-3/8” deep x 21-1/2” high. Weighs 73 lbs. Product ID Vendor ID Description Price CPL263500 IM350B Portable steel toolbox, 26” x 17-3/8” x 21-1/2”, black $495.00 CPL263501 IM350R Portable steel toolbox, 26” x 17-3/8” x 21-1/2”, red $495.00 Montezuma Portable Aluminum Toolbox 26” wide x 17-3/8” deep x 18-1/8” high. Weighs 53 lbs. Product ID Vendor ID Description Price CPL262503 SE250AL Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, brite $495.00 CPL262504 SE250ALB Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, black $525.00 CPL262505 SE250ALR Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, red $525.00 Montezuma Portable Steel Toolbox 26” wide x 17-3/8” deep x 18-1/8” high. Weighs 64 lbs. Product ID Vendor ID Description Price CPL262500 SE250B Portable steel toolbox, 26” x 17-3/8” x 18-1/8”, black $435.00 CPL262501 SE250R Portable steel toolbox, 26” x 17-3/8” x 18-1/8”, red $435.00 Montezuma Portable Steel Toolbox 22-1/2” wide x 13” deep x 14-1/8” high. Weighs 43 lbs. Product ID Vendor ID Description Price CPL001200 SM200B Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, black $295.00 CPL001201 SM200R Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, red $295.00 CPL001202 SM200W Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, white $295.00 Note: The 36” and 26” portable toolboxes can also be used with the roller cabinets on page 77. MonTezuMa Toolboxes 800.368.7773 CALL TOLL-FREE TO ORDER TODAY.80 sHoW sCHedule January 7-9, 2014 Keystone Farm Show York, Pennsylvania Booth 420-422 January 14-16, 2014 Fort Wayne Farm Show Fort Wayne, Indiana Booth 760-766 January 19-21, 2014 Quad Cities Farm Equipment Show Rock Island, Illinois Booth 701-703 January 24-26, 2014 Power Show Ohio Columbus, Ohio Booth 012, Bricker Building January 28-30, 2014 Iowa Power Farming Show Des Moines, Iowa Booth 1241 January 29-30, 2014 Midwest Ag Expo-Illinois Gordyville USA, Gifford, Illinois Booth 225 February 5-7, 2014 Southern Farm Show Raleigh, North Carolina Booth 3305 February 12-15, 2014 National Farm & Machinery Show Louisville, Kentucky Booth 8004, Pavilion February 28 – March 1, 2014 Mid-South Farm & Gin Supply Memphis, Tennessee Booth 919-921 March 4-6, 2014 Hawkeye Farm Show Cedar Falls, Iowa Booth 408-412 March 12-13, 2014 Triumph of Ag Expo Omaha, Nebraska Booth 631-633 March 25-27, 2014 WPS Farm Show Oshkosh, Wisconsin Booth D6538-D6541 April 3-5, 2014 Southern Plains Farm Show Oklahoma City, Oklahoma Booth AB515 July 10-12, 2014 WKMA 3i Show Dodge City, Kansas Lot I-62, I-64, I-66 July 18-20, 2014 Four State Farm Show Pittsburg, Kansas Lot 425-426 July 22-24, 2014 Michigan Ag Expo East Lansing, Michigan Lot 521 August 5-7, 2014 Farm Fest Redwood Falls, Minnesota Lot 214 August 5-7, 2014 Empire Farm Days Seneca Falls, New York Lot 709, West Time Saver Ave. August 12-14, 2014 Wisconsin Farm Technology Days Barron County, Wisconsin Lot 648 August 12-14, 2014 Ag Progress Rock Springs, Pennsylvania West 2nd Street August 19-21, 2014 Dakotafest Mitchell, South Dakota Lot 532 August 26-28, 2014 Farm Progress Show Boone, IA Lot 857 September 6-14, 2014 Clay County Fair Spencer, Iowa 7th Avenue & 2nd Street September 9-11, 2014 Big Iron Farm Show & Expo West Fargo, North Dakota Booth A32-A34, Ag Building September 9-11, 2014 Husker Harvest Days Grand Island, Nebraska Lot 354 September 16-18, 2014 Farm Science Review Columbus, Ohio Lot 581 December 2-4, 2014 Greater Peoria Farm Show Peoria, Illinois Booth H0827-H0831 December 9-11, 2014 Nebraska Power Farming Show Lincoln, Nebraska Booth 1430 December 16-18, 2014 Indiana-Illinois Farm Equip. Show Indianapolis, Indiana Booth 203, 204, 204A 13540 Spencerville Road Spencerville, Ohio 800-368-7773 www.sidist.com