HEIZOHACK - HM 4-300 EM and HM 6-300 EM - Wood Chip Machines Brochure

HM 4/6-300 HM 6-300 VM HM 5/6/8-400 HM 8/10-500 K & HM 14-800 K HM 10-500 KT & 14-800 KT HM 4/6-300 EM & 5/6/8-400 EM HM 14-800 KL Woodchippers Energy in balance with nature Pages 2 / 3 Pages 4 / 5 Pages 6 / 7 Pages 8 / 9 Pages 10 / 11 Pages 12 / 13 Pages 14 / 15 HM 4- 300 HM 6- 300Trunk diameter up to 30 cm The HEIZOHACK feed control HE 002 controls the feed motion of the wood to be made into chips irrespective of the drive performance. The integrated operating hours counter stores the daily and total numbers of hours. Auto reverse is available for the stress control to clear the drum. All manually loaded wood chipping machines with a chassis are products, which meet the requirements of the Equipment and Product Safety Act and bear the „Tested Safety“ mark. All these machines have only been authorised for manual loading and are equipped with a safety cable which runs round the in-feed table. High per form ance man ually load ed m obile woo d ch ippe r 2 High per form ance man ually load ed m obile woo d ch ippe r The manually fed wood chippers for mobile and flexible operation on the spot. The chipper is transported on a trailing axle or the three point hitch of the tractor. With the HEIZOHACK wood chipping machines, wood waste, such as slats, beams, logs, blocks and branches and whole tree trunks with a diameter of up to 30 cm (300 series) and up to 40 cm (400 series) can be shredded with little energy required. A steel conveyor belt and a pressure roller with welded tongs ensure powerful and reliable feeding of the chipping material. HM 4-300 HM 6-300 Feed Height: 300 mm Feed Width: 330 mm 500 mm Transport Height: 2422 mm Transport Width: 2265 mm Working Height: 850 mm Working Width: 2965 mm Ejection Height: 3419 mm Support Load: 490 kg 620 kg Total Length: 3213 mm 3382 mm Weight: about 1850 kg about 2250 kg Flywheel mass: 130 kg Feed in: Conveyor belt 600 mm long In-feed table 900 mm long Pressure roller with steel teeth Ø 380 mm Sieve: Standard mesh 35 / 40 mm Chip Drum Ø: 450 mm with quick change blades Drive: Power take-off shaft, max. 750 rpm Flywheel Ø: 1120 mm, 60 mm thick Ejection: Manually foldabale and rotatable, supported by pneumatic shock damper Controls: automatic load-dependent RPM control of the feed with two daily hours counters and an overall oper- ating hours counter; belt and roller speeds infinitely adjustable Chassis: Chassis 25 km/h unbraked and trailing axle Chassis 25 km/h with cable brake and trailing axle Tyres 10/75-15.3 Dimensions and weights incl. chassis Wood Chippers 3 HM 6- 300 VM With a feed height of up to 30 cm, cut wood and tree trunks can be worked on on the spot to high quality wood chips. The chipper mounted on a high speed trailer chas- sis makes it possible to get to the site quickly. The ability to rotate the chipper in the direction of the wood to be chipped using the heavy duty ball bearing ring between the chipper and the chassis. Mob ile w ood chip pers for man ual f eedi ng fo r flex ible oper ation s on the spot Trunk diameter up to 30 cm 4 Mob ile w ood chip pers for man ual f eedi ng fo r flex ible oper ation s on the spot The HM 6-300 reliably draws in logs with a diameter of up to 30 cm via a hydraulically driven feed with conveyor belt and pressure roller. The outstanding performance and the tandem chassis, on which up to 80 km/h can be driven, speaks for this series. The machine is for manual feeding only and equipped with a safety cable. HM 6-300 VM Feed Height: 300 mm Feed Width: 500 mm Transport Height: 2782 mm Transport Width: 2110 mm Working Height: 960 mm Ejection Height: 3681 mm Support Load: 100 kg Total Length: 4520 mm Weight: about 3500 kg Flywheel mass: 130 kg Feed in: Conveyor belt 600 mm long In-feed table 900 mm long Pressure roller with steel teeth Ø 380 mm Sieve: Standard mesh 35 / 40 mm Chipping Drum Ø: 450 mm with quick change blades Flywheel Ø: 1120 mm, 60 mm thick Ejection: Manually foldable and rotatable, pneumatic shock damper supports Ejection flap adjustment and electric tower rotation (infinite) Controls: automatic load-dependent RPM con- trol of the feed with two daily and an overall operating hours counters; belt and roller speeds infinitely adjustable Drive: Air-cooled four stroke diesel engine with direct injection Type Hatz 4L41C, 51 kW / 70 HP, max. 3000 rpm Chassis: ALKO tandem chassis 80 km/h, inertia braked Traction shaft adjustable for height, tyres 225/70 R 14 Dimensions and weights incl. chassis Wood Chippers 5 HM 5- 400 HM 6- 400 HM 8- 400 Stur dy m obile woo d ch ippe r for m anua l fee ding Trunk diameter up to 40 cm 6 A large impeller blower with integrated flywheel ensures good ejection of the chips and a powerful and even throughput of the chip drum. In order to ensure safe operations for manual feed- ing, these machines are equipped with a stable control lever above the feed table. Linked to a steel cable round the front edge of the feed table, the feed into the machine can be stopped with safety. By means of interchangeable sieves, available in different mesh sizes, uniform wood chips are gen- erated. HM 5-400 HM 6-400 HM 8-400 Feed Height: 400 mm Feed Width: 420 mm 500 mm 670 mm Transport Height: 2588 mm Transport Width: 2265 mm Ejection Height: 3502 mm Working Height: 790 mm Working Width: 3105 mm Support Load: 820 kg 910 kg 970 kg Total Length: 3343 mm 3427 mm 3596 mm Weight: about 2950 kg about 3150 kg about 3300 kg Flywheel mass: 300 kg 300 kg 470 kg Feed in: Conveyor belt 600 mm long In-feed table 900 mm long Pressure roller with steel teeth Ø 450 mm Sieve: Standard mesh 35 / 40 mm Chipping Drum Ø: 495 mm with quick change blades Drive: Power take-off shaft, max. 750 rpm Flywheel Ø: 1370 mm, 60 / 90 mm dick Ejection: Manually foldable and rotatable, supported by pneumatic shock damper Controls: automatic load-dependent RPM control of the feed with two daily and an overall operating hours counters; belt and roller speeds infinitely adjustable Chassis: Chassis 25 km/h unbraked and trailing axle Chassis 25 km/h with cable brake and trailing axle Tyres 400/60 - 15.5 Chassis 40 km/h with spring loaded air brake 3,5 t and trailing axle Dimensions and weights incl. chassis Wood Chippers 7 HM 5- 400 EM HM 6- 400 EM HM 8- 400 EM HM 6- 300 EM HM 4- 300 EM Efficient wood chipper with electromotor for stationary use HM 4-300 EM HM 6-300 EM Feed Height: 300 mm Feed Width: 330 mm 500 mm Transport Height: 2422 mm Transport Width: 2265 mm Ejection Height: 3310 mm Working Width: 2965 mm Total Length: 3700 mm Weight (without electromotor) 2100 kg 2320 kg Flywheel mass: 130 kg Feed in: Conveyor belt 600 mm long In-feed table 900 mm long Pressure roller with steel teeth Ø 380 mm Sieve: Standard mesh 35 / 40 mm Chipping Drum Ø: 450 mm with quick change blades RPM: max. 750 rpm Auxiliary Engines: Electromotor 45 kW / 1500 rpm V-belt drive, control cabinet with star-delta switching Weight with frame 625 kg Electromotor 55 kW / 1500 rpm V-belt drive, control cabinet with star-delta switching Weight with frame 680 kg Electromotor 75 kW / 1500 rpm V-belt drive, control cabinet with star-delta switching Weight with frame 810 kg Flywheel Ø: 1120 mm, 60 mm thick Ejection: Manually foldable and rotatable; supported by pneumatic shock damper Controls: Automatically load-dependent feed regulation; Two daily counters and one overall operating hours counter; Belt speed infinitely adjustable; Control cabinet with star-delta switching; connection on site in accordance with DIN-VDE* *German Commission for Electrical, Electronic and Information Technologies Trunk diameter up to 40 cm 8 Efficient wood chipper with electromotor for stationary use Wood Chippers HM 5-400 EM HM 6-400 EM HM 8-400 EM Feed Height: 400 mm Feed Width: 420 mm 500 mm 670 mm Transport Height: 2422 mm Transport Width: 2265 mm Ejection Height: 3310 mm Working Width: 2965 mm Total Length: 3700 mm Weight (without electromotor) 2950 kg 3170 kg 3550 kg Flywheel mass: 300 kg 300 kg 470 kg Feed in: Conveyor belt 600 mm long In-feed table 900 mm long Pressure roller with steel teeth Ø 380 mm Sieve: Standard mesh 35 / 40 mm Chipping Drum Ø: 495 mm with quick change blades RPM: max. 750 rpm Auxiliary Engines: Electromotor 45 kW / 1500 rpm V-belt drive, control cabinet with star-delta switching Weight with frame 625 kg Electromotor 55 kW / 1500 rpm V-belt drive, control cabinet with star-delta switching Weight with frame 680 kg Electromotor 75 kW / 1500 rpm V-belt drive, control cabinet with star-delta switching Weight with frame 810 kg Flywheel Ø: 1370 mm, 60 / 90 mm thick Ejection: Manually foldable and rotatable; supported by pneumatic shock damper Controls: Automatically load-dependent feed regulation; Two daily counters and one overall operating hours counter; Belt speed infinitely adjustable; Control cabinet with star-delta switching; connection on site in accordance with DIN-VDE* *German Commission for Electrical, Electronic and Information Technologies 9 HM 8- 500 K HM 10 -50 0 K HM 14 -80 0 K For private contractors and for the professional gen- eration of wood chips, the K series fulfils all wishes. A variety of additional options for the machine con- figuration are available for applications in daily use. Pow erfu l ent ry-le vel m odel for w ood chip pro duce rs The feed speed can be infinitely adjusted for all machines by means of a distributor fitted in the hydrau- lic control unit. The upstream hydraulically driven table feed roller helps to draw longer logs into the feed. By means of the standard adapter fit- ting for quick change blades, the blades can be exchanged in a very short period of time. Trunk diameter up to 50 cm End pieces: HM 8-500 up to 70 cm HM 10-500 up to 80 cm HM 14-800 up to 80 cm 10 The powerful professional machines are equipped as standard with remote controlled functions, such as turret rotation, raising and lowering, infi- nitely variable feed control via servo-hydraulics, electronic rpm and machine controls. The hydraulic block is fitted segment style in a clear and robust steel housing. Each valve is elec- trically activated and can, in addition, be operated by a hand lever (emergency operation). The hydraulic oil is cooled by an oil cooler with an electrically driven fan. Via a 10 groove V-belt reduction gearing, trans- mission is generated which enables varying shaft rpm’s to be transmitted powerfully. Pow erfu l ent ry-le vel m odel for w ood chip pro duce rs HM 8-500 K HM 10-500 K HM 14-800 K Feed Height: 800 mm Feed Width: 708 mm 877 mm 1215 mm Transport Height: 2900 mm Transport Width: 1)2700 mm / 2)2624 mm Working Height: 1200 mm Working Width: 4140 mm Ejection Height: 4410 mm 4980 mm Support Load: 2000 kg 2100 kg 2420 kg Total Length: 4610 mm 4780 mm 5120 mm Weight: ca. 6900 kg ca. 7400 kg ca. 8320 kg Flywheel mass: 1000 kg Feed in: Conveyor belt 900 mm long Feed table 1500 mm long Pressure roller with steel teeth Ø 800 mm In-feed table: Hydraulically foldable; including front end roller; optionally with conveyor belt Sieve: Standard mesh 45 / 60 mm with stop bars Chipping drum Ø: 495 mm with quick change blades Drive: Via universal shaft and V-belt transmission RPM: max. 1000 rpm Flywheel Ø: 1370 mm, 150 mm thick Ejection: Hydraulically foldable; height adjustable and rotatable (ejection height 3.35 m up to 4.25 m or 4.79 m with an HM14-800 K, Depending on chassis and tyres); hydraulic ejection flap adjustment Controls: Automatic load-dependent feed control; Rotation direction and speed of the conveyor belt and pressure roller infinitely variable, irrespective of one another and reversible; two day and one overall operating hours counters; Remote control with control panel for all functions Cassis: Chassis 25 km/h or 40 km/h trailing axle and spring-loaded air brake 1)Tyres 500/45 R22.5 2)Tyres 400/55 R22.5 2)Tyres 385/55 R22.5 Dimensions and weights incl. chassis Wood Chippers 11 HM 10 -50 0 K T HM 14 -80 0 K T Trunk diameter up to 50 cm Optionally we deliver the T60 remote control for the functions rotate, raise and lower the ejection turret and raise and lower the feed flap for all crane-loaded wood chippers. The pro fess iona l wo od chip per for e cono mic woo d ch ippin g pr oduc tion End pieces: HM 10-500 up to 80 cm HM 14-800 up to 80 cm 12 Wood Chippers The pro fess iona l wo od chip per for e cono mic woo d ch ippin g pr oduc tion HM 10-500 KTL HM 14-800 KTL Feed Height: 800 mm Feed Width: 877 mm 1215 mm Transport Height: 3650 mm Transport Width: 1)2980 mm / 2)2700 mm Working Height: 1620 mm Working Width: 4300 mm Ejection Height: 5800 mm Support Load: 1400 kg 1500 kg Total Length: 5800 mm Weight: about 11500 kg about 12500 kg Flywheel mass: 1000 kg Feed in: Conveyor belt 900 mm long Feed table 1500 mm long Pressure roller with steel teeth Ø 800 mm In-feed table: Hydraulically foldable; including front end roller; optionally with conveyor belt Sieve: Standard mesh 45 / 60 mm with stop bars Chipping Drum Ø: 495 mm with quick change blades Drive: Via universal shaft and V-belt transmission RPM: max. permissible 1000 rpm Flywheel Ø: 1370 mm, 150 mm thick Ejection: Hydraulically foldable, height adjustable and rotatable (ejection height 3.35 m up to 5.14 m or 4.79 m, depending on chas- sis and tyres); hydraulic ejection flap adjustment Controls: Automatic load-dependent feed control; Rotation direction and speed of the conveyor belt and pressure roller infinitely variable, irrespective of one another and reversible; two day and one overall operating hours counters; Remote control with control panel for all functions Chassis: Tandem chassis 40/60 km/h (without ABS) or 80 km/h (with ABS) and dual air brake system 1)Tyres 560/45 R22.5 2)Tyres 385/55 R22.5 2)Tyres 400/55 R22.5 Dimensions and weights incl. chassis 13 HM 14 -80 0 K L Set up on an up to 440 horsepower, four-wheel drive Mercedes Actros, our most powerful wood chipper is quickly on the spot. The drive is provided by the truck engine (auxiliary drive). Efficient and economic chipping of high-quality chip material is guaranteed in comfort and style. Trunk diameter up to 50 cm End pieces: HM 14-800 up to 80 cm 14 All wood chipper functions and the loading crane can be operated safely and comfortably from the lorry cab. By means of a camera mounted at the ejection point, the machine operator always has the chip material and the container levels in view. Powerful truck wood chipper for the professional chipper HM 14-800 KL Feed Height: 800 mm Feed Width: 1215 mm Transport Height: 3950 mm Transport Width: 2530 mm Working Height: 1800 mm Working Width: 3800 mm (without crane) Ejection Height: 5440 mm Total Length: 7800 mm Weight: about 23500 kg Flywheel mass: 1000 kg Feed in: Conveyor belt 900 mm long Feed in table 1500 mm long Pressure roller with steel teeth Ø 800 mm In-feed table: Hydraulically foldable; including front end roller; optionally with conveyor belt Sieve: Standard mesh 45 / 60 mm with stop bars Chipping Drum Ø: 495 mm with quick change blades Drive: High speed auxiliary drive via the truck engine (PTO) RPM: 1300 - 1600 rpm Drive Performance: 323 kW / 440 HP Flywheel Ø: 1370 mm, 150 mm thick Ejection: Hydraulically foldable; Adjustable for height and rotatable; Hydraulic ejection flap adjustment Controls: Automatic load-dependent feed control; Rotation direction and speed of the conveyor belt and pressure roller infinitely variable, irrespective of one another and reversible; two day and one overall operating hours counters; Remote control with control panel for all functions Chassis: Mercedes- Benz ACTROS 3344 AK 6X6 Track width 1800 mm Tyres Rear Axle 315/80 R22.5 Tyres Front Axle 385/65 R22.5 Dimensions and weights incl. chassis Wood Chippers 15 Our partner: Factory Maicha Factory Heidenheim How to find us... Technical changes reserved Heizomat Gerätebau- Energiesysteme GmbH Maicha 21 91710 Gunzenhausen Germany Tel. +49 (0 ) 98 36 97 97 -0 Fax +49 (0 ) 98 36 97 97 -97 info@heizomat.de • www.heizomat.de 88-004-010-002.005 • 05/2013 Woodchippers