Hiniker - AR-2000 - High-Performance Shredders Brochure

HigH CapaCity Flail SHredderS For Fast & Effective Corn & Cotton Residue Shredding. ar-2000 SerieS WE RESERVE THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE. THE ONLY WARRANTY APPLICABLE IS OUR STANDARD WRITTEN WARRANTY. WE MAKE NO OTHER WARRANTY, EXPRESSED OR IMPLIED. High Performance shredder designed for thorough shredding of tougher residue from today’s BT crops for unmatched productivity and durability. Proven design provides unrestricted material flow for fast and effective corn and cotton residue shredding. Available in 15 and 20 ft. widths with three knife options, the Hiniker 1700 Series provides outstanding performance and maximum value. 1700 SerieS Industry first 1/4" abrasion resistant steel hood offers more than twice the life of standard hoods. Available in 15, 18, 20, 25 and 30 ft. widths. HINIKER COMPANY 58766 240 St. • P.O. Box 3407 Mankato, MN 56002-3407 Phone (507) 625-6621 FAX (507) 625-5883 www.hiniker.com 02/13 Wear-Tuff® is a trademark of Lund Coating Technologies, Inc. Standard features and options, subject to change without notice by Hiniker Company. SpeCiFiCationS 1700 AR-2000 Working Width 15 FT. 20 FT. 15 FT. 18 FT. 20 FT. 25 FT. 30 FT. Rows/Spacing Six 30" Eight 30" Six 30" Six 36" Eight 30" Ten 30" Twelve 30" Knives (72) 3" Cup, 72 pr. Dual Side-Slicer, Or Combination Cup/Side-Slicer (96) 3" Cup, 96 pr. Dual Side-Slicer, Or Combination Cup/Side-Slicer 72 pr. 5/16" Wear-Tuff Hard-Surfaced Side-Slicer 72 pr. 5/16" Wear-Tuff Hard-Surfaced Side-Slicer 96 pr. 5/16" Wear-Tuff Hard-Surfaced Side-Slicer 128 pr. 5/16" Wear-Tuff Hard-Surfaced Side-Slicer 160 pr. 5/16" Wear-Tuff Hard-Surfaced Side-Slicer Rotor Speed 1700 RPM 1700 RPM 2000 RPM 2000 RPM 2000 RPM 2000 RPM 2000 RPM Knife Tip Speed 10762 FPM 10762 FPM 12714 FPM 12714 FPM 12714 FPM 12714 FPM 12714 FPM Hood Thickness 1/4" 1/4" 1/4" Abrasion- Resistant AR200 Steel 1/4" Abrasion- Resistant AR200 Steel 1/4" Abrasion- Resistant AR200 Steel 1/4" Abrasion- Resistant AR200 Steel 1/4" Abrasion- Resistant AR200 Steel Rotor Drive Belts (4) “C” Premium (6) “C” Premium (2) 4-Groove Banded (2) 4-Groove Banded (2) 4-Groove Banded (2) 5-Groove Banded (2) 6-Groove Banded Rotor Bearings 2" Bore Piloted 2" Bore Piloted 23/16" Piloted 23/16" Piloted 23/16" Piloted 2 3/16" & 27/16" Piloted 23/16" & 27/16" Piloted Wheels (field operation) Four 15 x 5 KB Four 15 x 5 KB Four 15 x 5 KB Four 15 x 8 KB Four 15 x 8 KB Four 15 x 8 KB Six 15 x 8 KB Recommended Tire Size 7.60 x 15 6-ply Rib 7.60 x 15 6-ply Rib 7.60 x 15 6-ply Rib 9.5L x 15 8-Ply Rib 9.5L x 15 8-Ply Rib 9.5L x 15 8-Ply Rib 9.5L x 15 8-Ply Rib (standard) Hitch Type Pull-Type or 3-Pt. Pull-Type or 3-Pt. Pull-Type or 3-Pt. Pull-Type or 3-Pt. Pull-Type or 3-Pt. Pull-Type or 3-Pt. Pull-Type Only PTO: Pull-Type Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch Category 5 Plus Constant Velocity 13/8" or 13/4" w/Overrunning Clutch PTO: 3-Point Category 5 13/8" or 13/4" w/Overrunning Clutch Category 5 13/8" or 13/4" w/Overrunning Clutch Category 5 13/8" or 13/4" w/Overrunning Clutch Category 5 13/8" or 13/4" w/Overrunning Clutch Category 5 13/8" or 13/4" w/Overrunning Clutch Category 5 13/8" or 13/4" w/Overrunning Clutch N/A Hydraulic Cylinders & Hoses (field operation) One 3 x 8 (optional) Two 2½ x 8 (optional) One 3 x 8 (optional) Two 2½ x 8 (optional) Two 2½ x 8 (optional) Two 2½ x 8 (optional) Two 3 x 8 (standard) Safety Lighting (optional) (optional) (optional) (optional) (optional) (optional) Standard Skid Plate Kit (optional) (optional) (optional) (optional) (optional) (optional) (optional) Center Grass Divider (optional) (optional) (optional) (optional) (optional) (optional) (optional) End Transport N/A (optional) N/A (optional) (optional) (optional) Standard - Includes Tires and Cylinders High-vacuum 3 inch cup knives ensure complete shredding, even in ridged fields. Or, choose power-saving reversible dual side-slicer knives where maximum suction isn’t required. The 1700 is also available in a special ridge-till configuration which places cup knives between the rows, and side slicers over the row. 235 Hp rated Superior™ gearboxes are standard on all machines. All units have a standard overrunning clutch to protect shredder and tractor. Category 5 plus constant velocity (C.V.) p.t.o.’s are standard on all trailing units. This eliminates driveline knocking and the need to disengage P.T.O. on short turns. An overrunning clutch is included to protect tractor P.T.O. during shutdown. Matched “C” section belts provide extra power transfer reserve and minimum slippage. 8 inch diameter spring loaded backwrap idler extends belt life and is easily adjusted with just a screwdriver. all rotor and drive shaft bearings are 2 inch diameter self-aligning. Bearings are shielded and precision piloted for long term stability and life. dual side-slicer knives 1700 HIGH PERFORMANCE ar-2000 ABRASION RESISTANT High Speed 2000 RPM dynamically balanced 10" diameter rotors thoroughly shred tough BT residue at increased ground speeds 235 horse- power rated gearbox Banded drive belts with easy adjust feature 1/4" AR200 abrasion resistant steel hood offers more than twice the life of standard hoods Choice of pull-type or 3-point mounted hitches Three knife options: 3" cup, reversible side-slicer, or combination cup and side-slicer High-speed 1700 RPM rotor for thorough high-volume shredding Matched “C” section belts with easy adjust feature High performance 235 horsepower rated gearbox long life, 5/16" x 21/2" hard-surfaced reversible side slicer knives are standard equipment. Direct mounting eliminates “D-rings” for fewer wearing parts. 235 Hp rated Superior™ gearboxes are standard on all machines. All units have a standard overrunning clutch to protect shredder and tractor. Category 5 plus constant velocity (C.V.) p.t.o.’s are standard on all trailing units. This eliminates driveline knocking and the need to disengage P.T.O. on short turns. An overrunning clutch is included to protect tractor P.T.O. during shutdown. Multiple groove, banded belts deliver maximum horsepower without slippage. Spring loaded backwrap idler is easily adjusted with just a screwdriver. rotor bearings are 23/16" and 27/16" in diameter, self-aligning and precision-piloted for stability and long life. Recutter bar provides extra cutting action Pull type or 3 pt mounted hitches Steel front flipper shields help protect from flying debris Full length 5" x 7" front frame tube Steel front flipper shields help protect from flying debris Full length 5" x 7" front frame tube provides superior strength and rigidity 5/16" Wear-Tuff® hard-surfaced knives, direct mounted to eliminate D-rings 3 inch cup knives An optional hydraulic end transport system allows for safe, convenient movement between locations.