Hiniker - HD Series - Mid-Mounted Booms Sprayer Brochure

Boom Spray Height 20" Minimum/68" MaximumTransport Height 12' 6¹/2"Transport Width 11' 3" (Tires Are Widest Point)Underframe Clearance 44"Total Weight 9100 lbs. (Empty)Tongue Weight 2550 lbs. (Full Tanks - Boom In Working Position)80/90 Ft Mid-Mounted Booms1000/1300 GALLON HD SERIES SPRAYERS• 5-Section, 80 or 90 foot fully hydraulicmid-mounted rear fold booms• Self-leveling suspension with hydraulic accumulators• Heavy duty trailer with welded tubular 2" x 8"frame and 4" x 8" hitch• High flotation 380/90R 46 or 14.9R 46radial tiresTrailer Frame 2" x 8" x ³/8" - Hitch Frame 4" x 8" x ³/8" Design Rated at 300+ H.P.Tank 1000 or 1300 Gallon Poly - 16" Hinged Lid - 5" Deep SumpCross Axle Reinforced 4" x 6" x ¹/2"Wheel Centers 120"Spindles 3¹/8" High Strength Steel, GussetedHubs 10 Bolt - 12,000 lb. CapacityRims 12"/10 BoltHitch Combination Pintle/Clevis - 76,000 lb. CapacityTire Options 380/90R 46 Radial 152A8 Rating or 14.9R 46 - 8?Rinse/Flush System 100 Gallon With Dual 360° Rinse BallsAgitation System Full Length Stainless Steel Sparger TubeQuick Fill Rear Mounted 2" Bottom Fill (Also Serves As Tank Drain)Pump Ace 150F-Hyd-304 Hydraulic - 160 Gpm Maximum FlowBoom Control Valves High Volume Plumbing with 300 psi KZ #CV-M Motorized Ball Valves (4) on 80 ft. and (5) on 90 ft.Booms 5-Section, 80 or 90 ft. Fully Hydraulic Rear Fold, Complete With All Cylinders And Hoses. 11¹/2 ft. Shock Absorber Cushioned Outer Breakaways.Boom Suspension Spring Loaded, Self-leveling Linkage Plus Accumulator CushioningBoom Lift Dual Vertical Slide With Hydraulic Accumulator Cushioning and 48" LiftBoom Hydraulic Controls Fasse Brand “Max Stack” With In-Cab Console. Performs All Boom Functions (Raise/Lower/Tilt/Fold) Using One Tractor Remote Outlet.Compatible with Open/Closed Center Hydraulic Systems.Spring Cushioned Boom Touch-Down Wheels w/Auto Wing Lift Feature.Spray Boom Plumbing Non-drip, ³/4" Triple Nozzles On 20" Centers With Caps And Gaskets.(Less Spray Tips) Stainless Steel Mounting Hardware.Quality Spray Equipment Since 1947CENTURY SPRAYERSA PRODUCT OF HINIKER COMPANY58766 240 St. • PO Box 3407 • Mankato, MN 56002-3407Phone (507) 625-6621 • Fax (507) 625-5883www.hiniker.comTRAILER SPECIFICATIONS—STANDARD EQUIPMENTBOOM SPECIFICATIONS—STANDARD FEATURESSee The Complete Line of Century Sprayers Including 125-1000 Gallon Models atwww.hiniker.comPatent applied for.A quality sprayer deserves a quality control system and the optional Hiniker 8605 delivers.• Dual auto rates • Stainless steel flowmeters • Wheel or radar adaptable speed sensing• Rapid response stepper valve rate adjustment Get reliable, accurate application rates at the touch of a button.86058605RATE CONTROLLER8605Non-drip, triple nozzles on 20" spacing are provided as standard equipment. Tip selection isaccomplished with just a twist. Boom clamps arestainless steel. An adjustable auxiliary spray nozzle is located behind each Trailer Tire.All boom functions are hydraulically controlledfrom the in-cab console. Boom lift, lower, wing tiltand fold functions require only one tractor remote.Hydraulic accumulators are provided on main and wing lift cylinders to provide shock cushioningand are combined with spring centered, self-levelinglinkage to assure a smooth boom ride.Eleven-foot outer wing is protected by a self-returning,shock absorber dampened breakaway system.Ace Hyd 150F-304 hydraulic pump provides reliable, high-volume flow with ample capacity foragitation requirements.Boom on/off functions are controlled by 300 psimotorized ball valves for long life and high flowcapacity. (4) on 80 ft. or (5) on 90 ft.100-gallon clean water tank feeds dual 360-degreein-tank rinse balls to provide quick and easy in-field rinsing of both tank and boom plumbing.Century’s optional foam marker provides 14-gallon capacity, dual drop bells and in-cabcontrol console.Conveniently located control manifold provideseasy access control of agitation, bypass and rinsefunctions. Flanged fittings are used where possible.Positioning booms midway between the tractor wheels and trailer tires results in amuch smoother ride compared to rear mounted booms. Century offers 1,000 or1,300 gallon tanks with 80 or 90 foot booms. A better design yields better results:• Significantly reduces vertical shock to boom components compared to rearmounted units which often cantilever booms 3 to 4 feet behind trailer axles.• Higher field speeds are possible, increasing productivity and makingmaximum use of favorable spraying conditions.• Greatly improves visibility of spray nozzles and boom ends.• Allows shorter wheelbase design for better tracking on hillsides and contours.• Rear fold design provides plenty of boom to tractor cab clearance during short turns.• Allows rear positioning of fill components: no need to fold booms when filling: simply back up to nurse vehicle to fill and “spray away”.Positioning booms in a mid-mount position (midway between the tractor wheels and trailer wheels) results in a much smoother ride compared to rear mounted booms which are often positioned 3-4 feet behind the trailer axle.Spring cushioned boom “Touch-down”wheels are equipped with switches which automatically activate wing lift hydraulics to help prevent wings from being damaged due to ground contact and to help maintain a minimum Tip-To-Target distance.Visual and audible alarms are activated to alertoperator when height adjustment has been made.Mid-Mount Features and OptionsThe Mid-Mount AdvantageMid-Mount Versatility & ConvenienceRemember the bounce in the back?Better Design–Better Results