IMS E - Truck Mounted Single Chamber Spreader Brochure

Recording and eva-luation of service data.Interactive communicationtechnology for all componentsin the surface condition management, based on state-of-the-art web technologyGPSGSMSMSMSWith the IMS series a com-pletely new generation ofspreaders has been introduced:from the hopper’s low centre ofgravity and high torsive strength,the pre-prepared fixing pointsfor all Boschung demounting systems to the intelligentOptiWet® distribution system –the IMS series represents aninnovative, automised andmobile spreading technology.The future ofspreading technologySWIS®SWIS®BORRMA-web®Complex functions, easily control-lable – a target which has been con-sequently achieved by Vpad andIMS. Due to its ergonomic designand acoustic feedback of set valuesit is almost possible to work witheyes shut with the Vpad and opera-tor stress is greatly reduced.Equipped with the latest processortechnology, the Vpad makes perfectoperation of all units easy and takesover every communicative task inthe surface condition management.frequency-overlaidauger controlfrequency-overlaidbelt controlE BThermographic methodto detect road surfacetemperature. Automaticadjustment of spreadingmedia dosing accordingto temperature mea-sured. Possibility to trans-fer the recorded data into BORRMA-web to supportGFS online.SDMStrassen-Dienst-ManagementMarcel Boschung Ltd.Route des Muëses 2 l CH-1753 Matran l SwitzerlandTel. +41 26 497 85 85 I Fax +41 26 497 85 90info@boschung.com I www.boschung.comYour dealerOther products by BoschungS3Compact sweeperL3WasherGFSStationary ice early warning system S950Mounted sweeper FASTStationary thawing agent spray system BORRMA-webData collection and managementIMSSpreadersMFSnow plows B4Compact snow cutter/blower B6Snow cutter/blower Technical modifications reserved.l248 en b BO 09/12Recording and eva-luation of service data.Interactive communicationtechnology for all componentsin the surface condition management, based on state-of-the-art web technologyGPSGSMSMSMSWith the IMS series a com-pletely new generation ofspreaders has been introduced:from the hopper’s low centre ofgravity and high torsive strength,the pre-prepared fixing pointsfor all Boschung demounting systems to the intelligentOptiWet® distribution system –the IMS series represents aninnovative, automised andmobile spreading technology.The future ofspreading technologySWIS®SWIS®BORRMA-web®Complex functions, easily control-lable – a target which has been con-sequently achieved by Vpad andIMS. Due to its ergonomic designand acoustic feedback of set valuesit is almost possible to work witheyes shut with the Vpad and opera-tor stress is greatly reduced.Equipped with the latest processortechnology, the Vpad makes perfectoperation of all units easy and takesover every communicative task inthe surface condition management.frequency-overlaidauger controlfrequency-overlaidbelt controlE BThermographic methodto detect road surfacetemperature. Automaticadjustment of spreadingmedia dosing accordingto temperature mea-sured. Possibility to trans-fer the recorded data into BORRMA-web to supportGFS online.SDMStrassen-Dienst-ManagementMarcel Boschung Ltd.Route des Muëses 2 l CH-1753 Matran l SwitzerlandTel. +41 26 497 85 85 I Fax +41 26 497 85 90info@boschung.com I www.boschung.comYour dealerOther products by BoschungS3Compact sweeperL3WasherGFSStationary ice early warning system S950Mounted sweeper FASTStationary thawing agent spray system BORRMA-webData collection and managementIMSSpreadersMFSnow plows B4Compact snow cutter/blower B6Snow cutter/blower Technical modifications reserved.l248 en b BO 09/12Recording and eva-luation of service data.Interactive communicationtechnology for all componentsin the surface condition management, based on state-of-the-art web technologyGPSGSMSMSMSWith the IMS series a com-pletely new generation ofspreaders has been introduced:from the hopper’s low centre ofgravity and high torsive strength,the pre-prepared fixing pointsfor all Boschung demounting systems to the intelligentOptiWet® distribution system –the IMS series represents aninnovative, automised andmobile spreading technology.The future ofspreading technologySWIS®SWIS®BORRMA-web®Complex functions, easily control-lable – a target which has been con-sequently achieved by Vpad andIMS. Due to its ergonomic designand acoustic feedback of set valuesit is almost possible to work witheyes shut with the Vpad and opera-tor stress is greatly reduced.Equipped with the latest processortechnology, the Vpad makes perfectoperation of all units easy and takesover every communicative task inthe surface condition management.frequency-overlaidauger controlfrequency-overlaidbelt controlE BThermographic methodto detect road surfacetemperature. Automaticadjustment of spreadingmedia dosing accordingto temperature mea-sured. Possibility to trans-fer the recorded data into BORRMA-web to supportGFS online.SDMStrassen-Dienst-ManagementMarcel Boschung Ltd.Route des Muëses 2 l CH-1753 Matran l SwitzerlandTel. +41 26 497 85 85 I Fax +41 26 497 85 90info@boschung.com I www.boschung.comYour dealerOther products by BoschungS3Compact sweeperL3WasherGFSStationary ice early warning system S950Mounted sweeper FASTStationary thawing agent spray system BORRMA-webData collection and managementIMSSpreadersMFSnow plows B4Compact snow cutter/blower B6Snow cutter/blower Technical modifications reserved.l248 en b BO 09/12Frequency controlled spiral auger? Intermediate ridges for salt mass flow relaxation ? Agitator fingers cut salt cluster ? Constant feeding flow due to frequency overlaid augerrotation? Secured salt feeding at all hopper filling stages? Continuous agent flow as well with smallest amountsNo plugging or clustering in spreading systemPlastic – an idealmaterial for bestspreading media flow? no adhesion and crusting of salt? special abrasion-proof material– suitable for sharp grit? highly elastic even at lowest temperaturesThanks state-of-the-art transmissionsystems such as GSM, GRPS, radioor WLAN, actual recorded valuesand service data can be exchangedbetween the Vpad and BORRMA-web or SDM.The add-on, Vpad joystick, snowplough control unit can be either fitted to the left or to the right12.0 m10 g/m2 30 %7:48-6,5°C -3,0°C8.0 m10 g/m2 30 %7:45-6,5°C -3,0°C1.5 m2.5 mVVVSIM2.0 m6.0 mVVVSIM6.0 m6.0 mVVVSIM4.0 m10 g/m2 30 %7:43-6,5°C -3,0°CSpreading pattern controlon displayData managementAutomised spreading due to the innovative OptiWet® technologyFS-Adaptive®Continuous development of proven FS 30 technologycares by use of variable brine addition dependent of saltmass flow for an optimal humidification of salt grain.Automatic spreading width stabilisationASBS®Uniform spreading width – independently of changingspeeds or density. Automatic distributor head adjustmentASN®Uniform spreading pattern – independently of changingspeeds or density. Nothing is left to chance with theIMS series’ new spreading mediadistribution system. Every phase ofspreading material flow has beenobserved and analysed, thus permit-ting perfect optimisation. TheOptiWet® technology and the useof modern materials facilitate therealisation of automised spreadingprocesses and result in optimalspread patterns at all speeds, obser-vation and manual readjustment isno longer necessary.Due to its modular design, theVpad stands for high flexibility –with or without snowploughcontrol unit attached – Displayavailable with graphic or lineardesign, with or without voiceinput and output. Control panelas a single compact unit or sepa-rate as keyboard and display.Always corresponding to servicerequirements.“8 m spread width,liquid pump on“60 km/h40 km/h20 km/hPerfect spreading pattern at any speedwith OptiWet®without OptiWet®SFThe control unit with amazing skillsSpinnerdisc speedrev/minSpinnerdisc speedrev/minSpinnerdisc speedrev/min? For centralized feeding withdefined impact position at spinner disc as presupposi-tion for an optimal lateral distribution? Even cone for a soft flow ofagent to spinner bladesupwards curved spinner ? Disc towards the outside forfocussing of spreading agent ? Two different blade lengths for an even distribution of spreading agentSpinner discMouth piece? Focussing of salt/brine mixture by opposing flow direction ? Constant feeding towards falling tube independent of distribution head positionElbow tubeFrequency controlled spiral auger? Intermediate ridges for salt mass flow relaxation ? Agitator fingers cut salt cluster ? Constant feeding flow due to frequency overlaid augerrotation? Secured salt feeding at all hopper filling stages? Continuous agent flow as well with smallest amountsNo plugging or clustering in spreading systemPlastic – an idealmaterial for bestspreading media flow? no adhesion and crusting of salt? special abrasion-proof material– suitable for sharp grit? highly elastic even at lowest temperaturesThanks state-of-the-art transmissionsystems such as GSM, GRPS, radioor WLAN, actual recorded valuesand service data can be exchangedbetween the Vpad and BORRMA-web or SDM.The add-on, Vpad joystick, snowplough control unit can be either fitted to the left or to the right12.0 m10 g/m2 30 %7:48-6,5°C -3,0°C8.0 m10 g/m2 30 %7:45-6,5°C -3,0°C1.5 m2.5 mVVVSIM2.0 m6.0 mVVVSIM6.0 m6.0 mVVVSIM4.0 m10 g/m2 30 %7:43-6,5°C -3,0°CSpreading pattern controlon displayData managementAutomised spreading due to the innovative OptiWet® technologyFS-Adaptive®Continuous development of proven FS 30 technologycares by use of variable brine addition dependent of saltmass flow for an optimal humidification of salt grain.Automatic spreading width stabilisationASBS®Uniform spreading width – independently of changingspeeds or density. Automatic distributor head adjustmentASN®Uniform spreading pattern – independently of changingspeeds or density. Nothing is left to chance with theIMS series’ new spreading mediadistribution system. Every phase ofspreading material flow has beenobserved and analysed, thus permit-ting perfect optimisation. TheOptiWet® technology and the useof modern materials facilitate therealisation of automised spreadingprocesses and result in optimalspread patterns at all speeds, obser-vation and manual readjustment isno longer necessary.Due to its modular design, theVpad stands for high flexibility –with or without snowploughcontrol unit attached – Displayavailable with graphic or lineardesign, with or without voiceinput and output. Control panelas a single compact unit or sepa-rate as keyboard and display.Always corresponding to servicerequirements.“8 m spread width,liquid pump on“60 km/h40 km/h20 km/hPerfect spreading pattern at any speedwith OptiWet®without OptiWet®SFThe control unit with amazing skillsSpinnerdisc speedrev/minSpinnerdisc speedrev/minSpinnerdisc speedrev/min? For centralized feeding withdefined impact position at spinner disc as presupposi-tion for an optimal lateral distribution? Even cone for a soft flow ofagent to spinner bladesupwards curved spinner ? Disc towards the outside forfocussing of spreading agent ? Two different blade lengths for an even distribution of spreading agentSpinner discMouth piece? Focussing of salt/brine mixture by opposing flow direction ? Constant feeding towards falling tube independent of distribution head positionElbow tubeFrequency controlled spiral auger? Intermediate ridges for salt mass flow relaxation ? Agitator fingers cut salt cluster ? Constant feeding flow due to frequency overlaid augerrotation? Secured salt feeding at all hopper filling stages? Continuous agent flow as well with smallest amountsNo plugging or clustering in spreading systemPlastic – an idealmaterial for bestspreading media flow? no adhesion and crusting of salt? special abrasion-proof material– suitable for sharp grit? highly elastic even at lowest temperaturesThanks state-of-the-art transmissionsystems such as GSM, GRPS, radioor WLAN, actual recorded valuesand service data can be exchangedbetween the Vpad and BORRMA-web or SDM.The add-on, Vpad joystick, snowplough control unit can be either fitted to the left or to the right12.0 m10 g/m2 30 %7:48-6,5°C -3,0°C8.0 m10 g/m2 30 %7:45-6,5°C -3,0°C1.5 m2.5 mVVVSIM2.0 m6.0 mVVVSIM6.0 m6.0 mVVVSIM4.0 m10 g/m2 30 %7:43-6,5°C -3,0°CSpreading pattern controlon displayData managementAutomised spreading due to the innovative OptiWet® technologyFS-Adaptive®Continuous development of proven FS 30 technologycares by use of variable brine addition dependent of saltmass flow for an optimal humidification of salt grain.Automatic spreading width stabilisationASBS®Uniform spreading width – independently of changingspeeds or density. Automatic distributor head adjustmentASN®Uniform spreading pattern – independently of changingspeeds or density. Nothing is left to chance with theIMS series’ new spreading mediadistribution system. Every phase ofspreading material flow has beenobserved and analysed, thus permit-ting perfect optimisation. TheOptiWet® technology and the useof modern materials facilitate therealisation of automised spreadingprocesses and result in optimalspread patterns at all speeds, obser-vation and manual readjustment isno longer necessary.Due to its modular design, theVpad stands for high flexibility –with or without snowploughcontrol unit attached – Displayavailable with graphic or lineardesign, with or without voiceinput and output. Control panelas a single compact unit or sepa-rate as keyboard and display.Always corresponding to servicerequirements.“8 m spread width,liquid pump on“60 km/h40 km/h20 km/hPerfect spreading pattern at any speedwith OptiWet®without OptiWet®SFThe control unit with amazing skillsSpinnerdisc speedrev/minSpinnerdisc speedrev/minSpinnerdisc speedrev/min? For centralized feeding withdefined impact position at spinner disc as presupposi-tion for an optimal lateral distribution? Even cone for a soft flow ofagent to spinner bladesupwards curved spinner ? Disc towards the outside forfocussing of spreading agent ? Two different blade lengths for an even distribution of spreading agentSpinner discMouth piece? Focussing of salt/brine mixture by opposing flow direction ? Constant feeding towards falling tube independent of distribution head positionElbow tubeFrequency controlled spiral auger? Intermediate ridges for salt mass flow relaxation ? Agitator fingers cut salt cluster ? Constant feeding flow due to frequency overlaid augerrotation? Secured salt feeding at all hopper filling stages? Continuous agent flow as well with smallest amountsNo plugging or clustering in spreading systemPlastic – an idealmaterial for bestspreading media flow? no adhesion and crusting of salt? special abrasion-proof material– suitable for sharp grit? highly elastic even at lowest temperaturesThanks state-of-the-art transmissionsystems such as GSM, GRPS, radioor WLAN, actual recorded valuesand service data can be exchangedbetween the Vpad and BORRMA-web or SDM.The add-on, Vpad joystick, snowplough control unit can be either fitted to the left or to the right12.0 m10 g/m2 30 %7:48-6,5°C -3,0°C8.0 m10 g/m2 30 %7:45-6,5°C -3,0°C1.5 m2.5 mVVVSIM2.0 m6.0 mVVVSIM6.0 m6.0 mVVVSIM4.0 m10 g/m2 30 %7:43-6,5°C -3,0°CSpreading pattern controlon displayData managementAutomised spreading due to the innovative OptiWet® technologyFS-Adaptive®Continuous development of proven FS 30 technologycares by use of variable brine addition dependent of saltmass flow for an optimal humidification of salt grain.Automatic spreading width stabilisationASBS®Uniform spreading width – independently of changingspeeds or density. Automatic distributor head adjustmentASN®Uniform spreading pattern – independently of changingspeeds or density. Nothing is left to chance with theIMS series’ new spreading mediadistribution system. Every phase ofspreading material flow has beenobserved and analysed, thus permit-ting perfect optimisation. TheOptiWet® technology and the useof modern materials facilitate therealisation of automised spreadingprocesses and result in optimalspread patterns at all speeds, obser-vation and manual readjustment isno longer necessary.Due to its modular design, theVpad stands for high flexibility –with or without snowploughcontrol unit attached – Displayavailable with graphic or lineardesign, with or without voiceinput and output. Control panelas a single compact unit or sepa-rate as keyboard and display.Always corresponding to servicerequirements.“8 m spread width,liquid pump on“60 km/h40 km/h20 km/hPerfect spreading pattern at any speedwith OptiWet®without OptiWet®SFThe control unit with amazing skillsSpinnerdisc speedrev/minSpinnerdisc speedrev/minSpinnerdisc speedrev/min? For centralized feeding withdefined impact position at spinner disc as presupposi-tion for an optimal lateral distribution? Even cone for a soft flow ofagent to spinner bladesupwards curved spinner ? Disc towards the outside forfocussing of spreading agent ? Two different blade lengths for an even distribution of spreading agentSpinner discMouth piece? Focussing of salt/brine mixture by opposing flow direction ? Constant feeding towards falling tube independent of distribution head positionElbow tubeRecording and eva-luation of service data.Interactive communicationtechnology for all componentsin the surface condition management, based on state-of-the-art web technologyGPSGSMSMSMSWith the IMS series a com-pletely new generation ofspreaders has been introduced:from the hopper’s low centre ofgravity and high torsive strength,the pre-prepared fixing pointsfor all Boschung demounting systems to the intelligentOptiWet® distribution system –the IMS series represents aninnovative, automised andmobile spreading technology.The future ofspreading technologySWIS®SWIS®BORRMA-web®Complex functions, easily control-lable – a target which has been con-sequently achieved by Vpad andIMS. Due to its ergonomic designand acoustic feedback of set valuesit is almost possible to work witheyes shut with the Vpad and opera-tor stress is greatly reduced.Equipped with the latest processortechnology, the Vpad makes perfectoperation of all units easy and takesover every communicative task inthe surface condition management.frequency-overlaidauger controlfrequency-overlaidbelt controlE BThermographic methodto detect road surfacetemperature. Automaticadjustment of spreadingmedia dosing accordingto temperature mea-sured. Possibility to trans-fer the recorded data into BORRMA-web to supportGFS online.SDMStrassen-Dienst-ManagementMarcel Boschung Ltd.Route des Muëses 2 l CH-1753 Matran l SwitzerlandTel. +41 26 497 85 85 I Fax +41 26 497 85 90info@boschung.com I www.boschung.comYour dealerOther products by BoschungS3Compact sweeperL3WasherGFSStationary ice early warning system S950Mounted sweeper FASTStationary thawing agent spray system BORRMA-webData collection and managementIMSSpreadersMFSnow plows B4Compact snow cutter/blower B6Snow cutter/blower Technical modifications reserved.l248 en b BO 09/12