LAFORGE - PR4-PR5 - Front Hitches Brochure

LAFORGE quality for allFront HitcHesFront PtosPhoto : hDI Front hItchwIth oPtIonal accessorIes www.fronthitch.comST3-ST3.8 ST3 on McCormick MC 120ST4-ST5Standard Equipment• Parallel foldable arms with locked or floating mode• Cat 3 automatic hooks• Tow hook• Top link with storage position• Parallel hydraulic hook up with isolating valveST4 on Massey Ferguson 6480LAFORGE front hitches are fully integrated to the tractor models they are designed for. Ground clearance and manoeuverability are retained.The hitches are compatible with standard or suspended front axle / front loaders* / big pack weights* / LAFORGE front PTOs. *Depending on the modelTechnical Data ST3 ST3.8 ST4-PR4 ST5-PR5Category 3N 3N 3N 3NLift capacity 3000 Kg (6600 lb)3800 Kg (8350 lb)4000 Kg (8800 lb)5000 Kg (11000 lb)Lift range 670 mm (26,5’’)760 mm(30’’)750 mm(29,5’)750 mm(29,5’’)LAFORGE offers front hitches with advanced features and higher lift capacity.Ground clearance and manoeuverability are fully retained. LAFORGE FRonT HiTcHeSFor transport, most common applicationsand centered load implementsLAFORGE offers basic, economic front hitches, compatible with front loaders*. Ground clearance and manoeuverability are fully retained. Standard Equipment• Folding arms• Cat 3 automatic hooks• Tow hook• Top link with storage positionLAFORGE FRonT HiTcHeS For all common applications,even with offset load implementsPR4-PR5PR4 on Claas Arion Standard Equipment• Parallel foldable arms with locked or floating mode• Cat 3 automatic hooks• Tow hook• Top link with storage position• Parallel hydraulic hook up with isolating valveHDI LAFORGE front hitches are fully integrated to the tractor models they are designed for. Ground clearance and manoeuverability are retained.The hitches are compatible with standard or suspended front axle / front loaders* / big pack weights* / LAFORGE front PTOs. LAFORGE offers reinforced front hitches for more demanding applications and offset loads. Ground clearance and manoeuverability are fully retained. The heavy - duty HDI front hitch includes a sturdy one - piece lower link design that enables it to withstand pushing loads, generated by implements such as rippers, dozer blades, plows...Technical Data HDiCategory 3NLift capacity 6000 Kg (13200lb)Lift range 710 mm (28’’)Standard Equipment• Cat 3 automatic hooks• Cat 3 top link with storage position• Parallel hydraulic hook up with isolating valve• Underaxle frame (except SuperSteer)LAFORGE FRonT HiTcHFor intensive applicationssuch as ripper or dozer bladeHDI on New Holland T7060 SuperSteerThe LAFORGE front hitches are fully compatible with the exclusive and patented LAFORGE electronic control and dynamic contour following system DynaconTouR®. Gold Medal SIMA 2005.This system dynamically corrects the front hitch position by measuring the length of the upper link.Without any adjustment, DynaconTouR® provides real time field contour following and allows for the full benefit of programmed sequences, thus simplifying headland operations.It may also be installed on factory front hitches of other brands, to enhance their performance and efficiency. DynaconTouR® SySTem on Claas XERIONCounter Clockwise rotation seen from the frontLAFORGE offers a range of autonomous front Power Take-Offwith electro-hydraulic multi-disc, modulated wet clutch.Clockwise rotation seen from the front Why choose a LAFORGE front PTO¦ Optimized integration on the tractor.¦ Easy to install. ¦ Built according to international standards. ¦ Drive-line assembly is customized for each tractor model. Benefits of the Electro-hydraulic System:¦ Long lasting¦ Autonomous hydraulic circuit, with integrated pump¦ Multi-disc wet clutch for smooth modulated engagement ¦ In cab On/Off switch with LEDOutput rating Nominal speed Shaft typeISO rotation 90 HP 540 RPM 6 splinesISO rotation 180 HP 1000 RPM 21 splinesTechnical characteristics of the LAFORGE front PTOs¦ Driven from engine crankshaft.¦ Speed indicating LED incorporated in On/Off Switch.¦ Oil cooler standard on ISO PTO, optional on counter-ISO.Output rating Nominal speed Shaft typeCounter ISO rotation 170 HP 1000 RPM 6 splinesLAFORGE, the best way to use the other half of you tractorCheck maximum axle load and tire pressure (in relation with travel speed) with tractor and tire manufacturers.LAFORGE’s responsability is limited to our product. Specification and design subject to change without notice. 02/13LAFORGE sarl Ph: 33 323 798 585Pôle d’Activités Fax: 33 323 798 17502190 GUIGNICOURT commercial@laforge.fr(France) www.laforge.frLAFORGE SYSTEM Inc Ph: (925) 827 2010 - 1 800 422 56364425 C Treat Blvd, Suite 230 Fax: (925) 689 7198CONCORD - CA 94521 lars@fronthitch.comUSA www.fronthitch.com