Lely Tigo - S - Compact Loader Wagon Series Brochure

innovators in agriculturewww.lely.comFast and efficient harvesting due to exact chopping and maximum loading volumesLELY TIGOLoader wagons and silage transport wagons2Good crop throughput for optimal loading capacityThe pick-up and chopping rotor are positioned close to one another and their speeds matched. Consequently, the pick-up does not need a high rotation speed to bridge the distance towards the rotor, which favours crop take-up as well as durability.Minimum space ensures an optimal chopping actionThe space between the wide tines of the rotor and blades is smallest with Lely Tigo loader wagons. This minimal space ensures the best chopping action and optimum cut.Gentle handling, maximized filling3 LELY TIGOFast processing of huge amounts of silageEnsiling forage that is too moist may produce butyric acid. On the other hand, a crop that is too dry cannot be compacted. For clamps with inadequate compaction there is an increased risk of fungi and butyric acid; when clearing the clamp, air can penetrate more easily so that overheating may occur. Therefore, timing and capacity are very important to ensure quality clamped silage.Both the Tigo S loader wagons with swing arm intake and the models with a rotor feed system handle the crop exceptionally gently. The systems are fitted with the widest possible tines, which are positioned very closely together, so that an exceptionally large surface area is created. This ensures that the loader wagon is properly filled while maximizing its loading capacity, without impairing the forage quality due to ‘pulping’ by the rotor. Tigo loader wagons give you maximum harvesting results.A smooth drive line with a long life spanAll Lely Tigo loader wagons are directly driven from heavy-duty gears. The integration of the drive line into the chassis is a innovative concept; it contributes to a long life span as well as saving weight.Propelled with maximum forceThanks to a highly efficient chopping rotor with 25 mm wide tines and a total surface of over 1 m², the result: high-quality fodder suitable for livestock, and a wagon which is fully loaded to its maximum capacity.Camless pick-up for more efficient loadingThe efficiency of loader wagons is linked to their pick-up capacity. Therefore, all Lely Tigo loader wagons are equipped with a camless pick-up, fitted with five or seven tine bars to ensure maximum output, which is reliable and requires minimum maintenance.44Harvest results.A million cows are milked daily by Lely robotic milking systems but it’s not only the Astronaut that makes robotic milking such a success. It’s the knowledge and experience of our employees that help farmers to achieve the best results with their herds.That’s why we know – more than anybody else – that good quality roughage is the basis of your success. It ensures good animal health, maximum fodder intake and avoids additional cost for concentrates and additives… Your forage harvesting is the start for good and effi cient milk and meat production.What you feed is what you get LELY STORM55 LELY TIGO4Harvest results.A million cows are milked daily by Lely robotic milking systems but it’s not only the Astronaut that makes robotic milking such a success. It’s the knowledge and experience of our employees that help farmers to achieve the best results with their herds.That’s why we know – more than anybody else – that good quality roughage is the basis of your success. It ensures good animal health, maximum fodder intake and avoids additional cost for concentrates and additives… Your forage harvesting is the start for good and effi cient milk and meat production.What you feed is what you get6A strong drive for strong performanceThe drive unit of the Tigo R Profi and R Combi is powered by a low wear, maintenance free and enclosed oil immersed gearbox with extremely strong spur gears. The gear housing is integrated into the chassis, thus making it a structural component. This construction is of a higher quality than a cast iron gear housing or chain drive.7 LELY TIGOMaintenance free oil immersed gearboxThe more efficient the driveline, the more power you have at your disposal for collecting, chopping and loading. The basic prerequisite for this is high-performance drive technology: the drive unit is supported in an enclosed oil immersed gearbox which is maintenance free with low wear. The power is transmitted by strong spur gears featuring an extremely effective tolerance fit involute toothing from the shaft to the drive sprocket on the chopping rotor.Maximum functional safetyAll drive side bearing points are equipped with generously dimensioned self aligning roller bearings. Only Lely provides this feature, which ensures a long lifetime. Functional safety is top priority for Lely. Removing welded joints allows better dimensional accuracy, safe running and an extremely long lifetime. That is why all power transmitting parts are firmly bolted together.Strong drive elementsThe chopping rotor drive is also top quality. The high strength drive shaft is able to cope with a variety of loads. The bolted connection with the chopping rotor ensures maximum installation accuracy and precise running.CasingBearingsGearsChopping rotorShafts8Camless pick-up unit for more efficient loadingThe efficiency of a loader wagon is greatly dependent upon pick-up capacity. All Tigo models are equipped with a pick-up which no longer utilises cam track steering. The Tigo R Profi and R Combi models are unique in having seven tine bars. These features enable both model ranges to perform better, faster and more efficiently than other loader wagons.9 LELY TIGONumerous benefitsThe camless pick-up by Lely:• Five or seven tine bars mean good crop throughput.• Clean pick up due to the reinforced tines positioned close to each other (54 mm).• Tine loss protection.• Low-wear thanks to non-steered tines.• Smooth running due to lack of cam track steering.• Maintenance free as components need no lubrication.Good forage starts with clean loadingThe closely spaced (54 mm) tines of the 1,900 mm working width pick-up with seven rows of tines (Profi, Combi) and the 1,800 mm pick-up with five rows of tines (S and R models) ensure precise crop pick-up and efficient transfer to the feed unit.Good crop throughput for maximum loading capacityGood crop throughput results in a consistent intake load, which means that maximum capacity can be achieved with minimal power and wear. The pick-up and chopping rotor are positioned close together and run at virtually the same relatively low speed, thus providing excellent crop flow handling. Wear-resistant and maintenance freeSince the new camless pick-up does not have a cam track, the pick-up unit consists of fewer moving parts. This is more reliable, less sensitive to wear, quieter and maintenance free. Furthermore, the tines are reinforced and all components are hot dip galvanised to protect them even more effectively against the elements and corrosive sap from the crop. The result is clear to see; lower maintenance costs and a higher trade-in valuePick-up tracer roller (optional)Running in the centre of the tractor track, ensuring a reliable pick-up tracing under the most difficult soil conditions.Wind guard with short crop rollerThe height adjustable impact plate with the short crop roller provides even better pick up of crops (standard on all Tigo rotor models).Hydraulic pick-up release (optional)Ensures constant contact pressure to protect both the turf and the pick-up.Crop throughputThe pick-up and chopping rotor are positioned close to each other.Castor action pick-up guide wheels The castor action pick-up guide wheels, which are height adjustable, relieve the load on the pick-up when turning.Camless pick-upSeven rows of non-steered tines spaced just 54 mm apart ensure an extremely clean crop pick-up across a working width of 1.90 m.10An efficient chopping rotor makes all the differenceLely Tigo R Profi and R Combi wagons feature a highly efficient chopping rotor so that you, the customer, can obtain the maximum yield from your investment. Accordingly, seven spiral-shaped rows of tines prevent power peaks and ensure smooth running. The rotor conveys the crop smoothly, powerfully and extremely gently across a 1 m² surface into the wagon.11 LELY TIGOWide tines for maximum conveying performanceMaximum rotor thrust is decisive for achieving the required loading quantity when filling the wagon. Thanks to the large surface of over 1 m² and the 25 mm-wide tines, the Tigo Rotor can pack fodder optimally. The result is high-quality fodder suitable for livestock, and a wagon which is fully loaded to its maximum extent.Easily-replaceable tinesIt is possible to replace a tine segment on the rotor without removing the rotor. Every ring consists of three tine segments which are interlocked onto the rotor casing. Each ring can be replaced individually. Maximum performance, minimum powerThe power requirement for the chopping unit is low because there is minimal opportunity for the grass to get into the narrow gap between the knives and the rotor tines. When pushing material, the wide edges on the rotor tines have maximum contact with the crop, thus reducing losses to a minimum.Generously sized self-aligning roller bearingsThe rotor is fitted with generously sized self-aligning bearings at both ends.Replaceable tinesThe replacement of one tine segment on the rotor is possible without removing the rotor.Increased thrust at low powerThe rotor tines have a 25 mm wide flat edge, which results in enhanced thrust with a low power requirement.12High performance cutting unit for precise short choppingThe pivoting 40 knife cutting unit of the Lely Tigo R Profi and R Combi chops crops short, thus producing optimum fodder. The small gap of only 3 mm ensures accurate chopping. Every knife is protected by the Trimatic knife protection system. The chopping length can be quickly changed by simply preselecting different knives. Should there be a blockage in the system, the entire chopping unit can be easily lowered hydraulically from the tractor cab.13 LELY TIGOMaximum chopping powerExcellent chopping results mean improved fermentation and pick up of fodder. The knives are positioned only 37 mm apart with the 25 mm wide rotor tines between them, resulting in a cutting gap of only 3 mm. The narrow cutting gap ensures smooth and excellent chopping.Easily varied chop lengthOn the Tigo R Profi and R Combi models, the minimum chop length is just 37 mm The chop length is easily varied as not all crops are the same and not all livestock farmers have the same requirements. The full set of knives is actually split into two groups so the selection can easily be made between non-chopping, chopping to 74 mm or chopping to 37 mm.Reliable due to good knife protectionEach knife is individually safe guarded by the Trimatic knife protection system. Should a foreign object enter the unit, the rotor presses it against the knife. The release spring flexes, immediately reducing the force on the knife and thus saving the rotor and the knives from damage. Once the obstacle has passed, the knife returns to its operating position again.Optimum ease of maintenance The new chopping unit can be pivoted completely out of the wagon for maintenance purposes. The cutting unit can be unlocked and pivoted out to the side without the need for tools. Knives can be replaced quickly and easily without the use of tools.Adjustable chop lengthsThe chopping unit is divided into two groups, making it easy to switch from 37 mm chopping, 74 mm chopping or non-chopping.Knife protectionA Trimatic knife protection system protectsthe knives and the rotor against damage.Toolless knife replacementThe long, robust knives, serrated on one side, ensure optimum chopping results and can be replaced without tools.37 mm25 mm14A reliable chassis for all situations Increasing loading volumes and high driving speeds: the demands on a loader wagon chassis are always extreme. High quality suspension tandem or tridem chassis with trailed or forced steering – Lely provides the appropriate chassis for each application, as safety is the top priority. The parabolic or hydro-pneumatic suspension chassis ensure optimum ground adaptation and safe driving characteristics. www.lely.comwww.lely.comwww.lely.comwww.lely.com15 LELY TIGOParabolic suspension tandem chassis for optimum driving comfortThe Lely Tigo S Profi and R models have to hold the road well in any situation. Therefore, a parabolic suspension tandem assembly has been chosen. Thanks to this assembly, the Tigo can manage high speeds on the road and at the same time has excellent ground contour following qualities in the field. The equalising linkage with its large pendulum range ensures optimum ground alignment in the field and in silos, and also ensures that the load is distributed proportionally among the two axles. The heavy duty leaf springs provide optimum driving comfort.Bogie tandemThe Lely Tigo R Profi, R Combi and T models are all equipped with a 20-tonne bogie tandem axle unit with rear steering axles. They can also be fitted with a forced steering system. The large suspension travel provides even load distribution and excellent ground adaptation. The large volume tyres (maximum size: 800/45-R26.5) provide a huge supporting surface which is gentle on the ground.Tandem unit with hydro-pneumatic suspension supportThe tandem axle unit with hydraulic compensation provides high rolling stability. Intelligent hydraulics ensure optimum ground adaptation. When fitted with an automatic level control, the full suspension path is always available, independent of the loading state. The automatic level compensation ensures that the vehicle always stands parallel to the slope. The cross switching of the suspension cylinders ensures the rolling stability of the vehicle, thus permitting higher speeds when turning. This chassis is available for the Lely Tigo R Profi, R Combi and T models.Tridem unit with hydro-pneumatic suspension supportOn the Tridem chassis, high loads are uniformly distributed, thus ensuring very gentle treatment of the ground. The hydro-pneumatic suspension support with automatic level control offers greatest driving comfort. The front and rear axle are directed by forced steering. Because of the low trailing attachment with ball head coupling, the vehicle can be trailed at an admissible total weight of 30 tonnes. This chassis is available for the Lely Tigo R Profi and R Combi models.Parabolic tandem suspension.Bogie tandem suspension.Hydro-pneumatic tridem suspension.With automatic level adjustmentDue to the automatic level adjustment, the loader wagon is always parallel to the slope. Irrespective of the degree of loading, the loader wagon adjusts consistently to optimal chassis height, so that the full pendulum stretch and spring stretch are maintained at all times. Without automatic level adjustmentDepending upon the degree of loading, the loader wagon will incline backwards on slopes. In bends, the wagon will incline to the side at high speeds. Due to filling the wagon and the resulting spring loading, a considerable pendulum stretch as well as spring stretch go to waste.Hydro-pneumatic tandem suspension.16Function displayThanks to the clear and neatly arranged LED indicators, the operator can see exactly which functions have been activated.Loading menuAutomatic loading systemChopping unitDeflecting drawbarPick-up General settings Hydropneumatic suspensionWork lights Unloading menu Speed of floor chain Floor chain directionLateral conveyor beltTop limiting coverFeed rollersTail gate Automatic unloading system Counters Load counterHour counterLoad status indicatorISOBUS – maximum ease of operationThe loader wagon with an ISOBUS onboard computer can optionally be controlled with the control unit or the tractor terminal. The arrangement with the loader wagon functions on the tractor joy stick provides maximum operating comfort. The ISOBUS control provides the driver with additional functions such as:• Speed dependent locking of the steering axle.• Level control with hydro-pneumatic suspension.• Weighing system (optional).• Integrated diagnosis system.Automatic blocking of trailing steering axleAt speeds of over 20 km/h or when driving backwards, the steering axle is locked automatically.Weighing unit (option)This gives a display of unladen weight, total weight and the weight of the load.17 LELY TIGO3 LELY HIBISCUSYou work with our machines in the great outdoors, an environment that is greatly infl uenced by the soil, weather and other external factors. New challenges are presented to machines every day. If you run into a problem it is essential that any breakdowns resulting from damaged parts are limited to an absolute minimum. It is for this reason that our dealers are geared up to respond rapidly, so that your activities can be resumed as soon as possible. They hold stocks of the most essential parts and have the expertise needed to get the machine in question performing optimally again. Furthermore, they can rely on the back-up of the Lely organisation seven days a week. So opting for Lely entails more than just choosing a machine. We ensure that your forage harvesting goes smoothly.Our experience can’t be bought – that’s why you get it for free1819 LELY TIGOLely TigoLely Tigo SLely Tigo RLely Tigo S Profi20Lely Tigo SThe Tigo S is a compact loader wagon series with a controlled feed unit, Lely provides the correct model for any operation with three (classic models) or five swing arms. The high performance chopping unit can be fitted with up to 33 knives, which are easy to replace. The low loader models with low centres of gravity and wide tracks appeal to users due to their safe operation on slopes and their low empty weight.Lely Tigo R The Tigo R models are loader wagons for medium to large agricultural businesses, which produce their own silage. They are robust and provide increased capacity. These wagons are fitted with a 31 knife 800 mm chopping rotor and a five tine bar camless pick-up. The configuration of these wagons is simple but it boasts high capacity and ease of operation.Lely Tigo S ProfiThe new Tigo S Profi series has been developed especially for the modern, high performance agricultural business. The camless pendulum pick-up with five rows of tines ensures clean pick-up of crops. The feed unit is powered by a heavy duty gear drive and has five stable feed forks to transfer the crop smoothly and extremely gently into the wagon. The Tigo S Profi series is available in four wagon types from 40 to 70 m³ and two discharge wagon models.TECHNICAL SPECIFICATIONSTIGO S 25 ST Classic 35 S(T) Classic 35 S(T) 40 S(T) 50 S(T)Volume (DIN 11471) (m3) 17 22 22 24.50 29Capacity (med. compaction)* (m3) 25 34 34 37 48Max. permissible weight (kg) 5,800/6,200 5,800/6,200 6,200 8,000/11,000 8,000/11,000Number of swing arms 3 3 5 5 5Minimum chop length (mm) 38 38 38 38 38Working width of pick-up (DIN) (m) 1.80 1.80 1.80 1.80 1.80TECHNICAL SPECIFICATIONSTIGO R 40 R(D) 50 R(D) 60 R(D)Volume (DIN 11471) (m3) 26 (25.70/28.70*) 30 (28.70/31.70*) 35 (33.80/36.80*)Capacity (med. compaction)* (m3) 40 45 60Max. permissible weight (kg) 11,000/14,000/16,000 11,000/14,000/16,000 11,000/14,000/16,000Feed unit Rotor Rotor RotorMinimum chop length (mm) 45 45 45Working width of pick-up (DIN) (m) 1.80 1.80 1.80TECHNICAL SPECIFICATIONSTIGO S PROFI 40 S(D) 50 S(D) 60 S 70 SVolume (DIN 11471) (m3) 26 (25.7/28.7**) 30 (28.7/31.7**) 35 39Capacity (med. compaction)* (m3) 40 50 60 70Max. permissible weight (kg) 11,000/14,000 11,000/14,000 11,000/14,000 11,000/14,000Number of swing arms 5 5 5 5Minimum chop length (mm) 38 38 38 38Working width of pick-up (DIN) (m) 1.80 1.80 1.80 1.80Lely TigoLely Tigo R ProfiLely Tigo TLely Tigo R Combi21 LELY TIGOLely Tigo R ProfiThe Tigo R Profi models are used by agricultural contracting companies. The unique camless pick-up features seven tine bars; the high performance rotor is 800 mm in diameter and has seven spiral-shaped tines on each bar. 40 chopping knives cut crops to 37 mm. These loader wagons boast substantial capacity, and the automatic loading system ensures that they will be filled to their maximum.Lely Tigo R CombiThe R Combi models, in addition to their use as loader wagons, make excellent silage transport wagons too. This machine can be quickly and easily converted from a loader wagon into a silage transport wagon. The heavy-duty chassis, combined with the sturdy superstructure, make these wagons capable of withstanding the loads imposed by heavy silage.Lely Tigo TThe Lely Tigo T models have been specifically designed to transport massive silage volumes. The tandem axle ensures that you can drive safely even when the wagon is heavily loaded. The straight, profiled superstructure with its stanchions positioned close to one another ensures maximum stability of the wagon.* Depending on crop conditions / ** Without discharge rollers / D = With discharge rollersTECHNICAL SPECIFICATIONSTIGO R COMBI 60 R 60 RD 70 R 70 RDVolume (DIN 11471) (m3) 36.50 34.80/36.50** 41.50 39.50/41.50**Capacity (med. compaction)* (m3) 58 58 68 68Max. permissible weight (kg) 20,000/23,000 20,000/23,000 23,000/30,000 23,000/30,000Feed unit Rotor Rotor Rotor RotorMinimum chop length (mm) 37 37 37 37Working width of pick-up (DIN) (m) 1.90 1.90 1.90 1.90TECHNICAL SPECIFICATIONSTIGO R PROFI 45 R(D) 50 R(D) 60 R(D) 70 R(D)Volume (DIN 11471) (m3) 30 (28.7/31.7**) 30 (28.7/31.7**) 35 (33.8/36.8**) 39 (38.8/41.8**)Capacity (med. compaction)* (m3) 45 50 58 68Max. permissible weight (kg) 16,000 20,000/23,000 20,000/23,000 20,000/23,000Feed unit Rotor Rotor Rotor RotorMinimum chop length (mm) 37 37 37 37Working width of pick-up (DIN) (m) 1.90 1.90 1.90 1.90TECHNICAL SPECIFICATIONSTIGO T 60 T 70 TVolume (DIN 11471) (m3) 38 42Unladen weight (approx.) (kg) 5,700 6,400Max. permissible weight (kg) 20,000/23,000 20,000/23,000Standard tyres 550/60-22.5 550/60-22.522Lely Tigo S The Tigo S range has a model suitable for all farms. This is due to there being a choice of four different sizes, single or tandem axles and foldable or rigid extension sides. The Tigo ST models have been especially developed for mountainous regions. Their ability to operate in such circumstances is due to the combination of wide track width and a low centre of gravity.23 LELY TIGOOptimum crop treatmentThe swing arm feed unit of the Tigo S ensures optimal crop treatment. The kidney-shaped cam track steers the feed forks through the loading area, smoothly and crop-friendly. The double tines mounted on the feed forks remain in contact with the crop in an ideal angle until they are retracted again. The result: maximum filling of the wagon with carefull treated crop.Unique gear driveThe feed unit is powered by a heavy duty gear drive. Its ability to absorb high loads ensures consistent and smooth running of the wagon. Each feed fork is mounted on two individual roller bearings. From the Lely Tigo 40 S model onwards all bearings have central lubrication as standard.Perfect cutting qualityAll Tigo S models can be fitted with a maximum of 33 knives arranged in two rows giving chop lengths down to 38 mm. The chop length can be adjusted via a lever which selects the required number of knives (0/5/17/21/33). The knife shape ensures an even cutting action. Each knife is protected against foreign objects and can be exchanged without the need for special tools. A blockage can be easily removed by pivoting the chopping unit (hydraulic actuation optional). For sharpening the chopping unit can be easily lowered and for more major maintenance jobs, the unit can be placed on special service wheels.24Optional: electromagnetic comfort controlAll functions can be controlled via an exceptionally user-friendly control box in the tractor cab (suitable for load sensing).Spool valve control as standardThe main functions of the Tigo S are actuated by means of a hydraulic valve control.The only loader wagon with a camless pick-upThe new 1.80 m camless pick-up benefits from galvanizing ensuring protection from corrosive crop residues. The benefit of a camless pick-up is the vast reduction in moving parts meaning that the pick-up is maintenance free. The unit consists of five rows of spring tines which are positioned 54 mm apart to ensure unrivalled raking action giving even, gentle crop flow. The ability of the unit to float combined with its pneumatic pick-up wheels ensures precise ground contour following.Ergonomic controls for relaxed and safe operationThe main functions of the Tigo S are hydraulically controlled via spool valves which may be either cable or electromagnetic actuated.• Floor chain (standard).• Pick-up (standard).• Tail gate (standard).• Deflecting draw bar (option).• Superstructure (option).Heavy duty floor chains for quick unloadingThe floor chains, with their infinite speed control, operate almost without any noise. Two 10 mm chains, with a breaking strength of 12.5 tonnes each, and robust carriers ensure that the wagon is unloaded quickly and safely.Ground contour following for Tigo S modelsThe floating pick-up design gives precise ground following.Camless pick-upFive rows of non-steered tines spaced just 54 mm apart ensure an extremely clean crop pick-up across a working width of 1.80 m.25 LELY TIGOLely Tigo 35 SThis high performance machine has a 5-swing arm feed unit and foldable roughage superstructure.Lely Tigo 35 ST ClassicThe single axle Tigo 35 ST Classic has a 3-swing arm feed unit. This is the ideal machine for small to medium-sized businesses – in particular for green fodder/zero grazing.Lely Tigo 40 SThis product will hold 24.5 DIN m3. The enclosed all-steel superstructure (optional) ensures excellent stability when used for silage.Lely Tigo 40 STThe newly developed low loader models are well balanced due to their wide track width, thus allowing users to work safely, even on steep slopes.26Hydraulic hitch drawbarFor maintaining a level machine on uneven ground. Floor clearance up to 70 cm.Hydraulic roughage superstructureCan be folded directly from the tractor cab.Top limiting coverSecure retention even of short cut crops due to the top limiting cover.Castor action pick-up guide wheelsFor optimum control when turning: the castor action pick-up guide wheels relieve the strain on the pick-up.Wind guard with short crop rollerFor optimum fodder flow, even when operating at higher speeds.Electromagnetic controlDirect switching of all functions from the tractor cab via a control box (load sensing possible). Standard on S Profi models.‘Wagon full’ alarmA sensor on the tailgate reports ‘Wagon full’ via an alarm on the electrical control box. Standard on S Profi models.Hydraulic chopping unitThe hydraulically lowered chopping unit ensures quick removal of fodder accumulation.Special equipment – the S and S Profi models can be selected with different optionsLely Tigo 50 STThe newly developed low loader models are well balanced due to their wide track width, thus allowing users to work safely, even on steep slopes.Lely Tigo 50 SThe largest in the Tigo S class with 29 DIN m3. Its loading volume and robust technology make this a particularly high output harvesting machine. It can be delivered either with a roughage superstructure or an all-steel superstructure.27 LELY TIGOLely Tigo ST The Tigo ST has been specially designed for use on the steepest slopes. To cope with the special demands of alpine farmers the Tigo ST was designed. T stands for ‘Tieflader’ and refers to the especially low centre of gravity of this particular type of loader wagon.Wide track width – low centre of gravityThanks to their low centre of gravity and 2,120 mm track width, the Tigo ST models are the ideal loader wagons to operate on steep slopes. Depending upon the model, the loading floor height is approximately 25 to 40 cm lower than a standard model, this ensures sufficient stability when working on extremely steep slopes.28Lely Tigo S ProfiThe Lely Tigo S Profi has a load unit that handles green fodder, hay and silage extremely gently while the compact frame construction with a vertical superstructure allows for an enormous load volume and is designed for a permitted total weight of up to 14 tonnes. The discharge wagon models are ideally suited both for use in the silo and in operation with the side discharge conveyor for daily feeding of green grass. The wide selection of tyres and running gear enables the Tigo S Profi to fulfil all the demands of large and medium sized professional agricultural enterprises. 29 LELY TIGOOptimum crop treatmentThe heart of the Tigo S Profi is the cam track steered load unit. Five robust feed forks ensure even and fast intake. The kidney-shaped cam track steers the rakes smoothly and gently into the load unit. The twin tines of the rakes maintain contact with the crop at an ideal angle until they are retracted shortly before the crop enters the loading wagon. The gentle action of the loading and cutting process results in high quality forage.Unique gear driveThe feed unit is powered by a heavy duty gear drive. Its ability to absorb high loads ensures consistent and smooth running of the wagon. Each feed fork is mounted on two individual roller bearings. A central lubrication of all bearings is standard.The only swing arm loader wagon with a camless pick-upThe 1.80 m camless pick-up benefits from galvanizing ensuring protection from corrosive crop residues. The benefit of a camless pick-up is the vast reduction in moving parts meaning that the pick-up is maintenance free. The unit consists of five rows of spring tines which are positioned 54 mm apart to ensure unrivalled raking action giving even, gentle crop flow. The ability of the unit to float combined with its pneumatic pick-up wheels ensures precise ground contour following.Ground contour following for Tigo S Profi modelsThe floating pick-up design gives precise ground following.Camless pick-upFive rows of non-steered tines spaced just 54 mm apart ensure an extremely clean crop pick-up across a working width of 1.80 m.30S ProfiSD ProfiElectromagnetic controlThe Tigo S Profi silage wagons are standardly equipped with hydraulic systems capable of load sensing. All functions can be operated simply and safely from the tractor cab using the modern control box.• Floor chain (standard).• Pick-up (standard).• Tail gate (standard).• Deflecting draw bar (option).• Chopping unit (option).• Superstructure (option).Perfect cutting qualityAll Tigo S Profi models can be fitted with a maximum of 33 knives arranged in two rows giving chop lengths down to 38 mm. The chop length can be adjusted via a lever which selects the required number of knives (0/5/17/21/33). The knife shape ensures an even cutting action. Each knife is protected against foreign objects and can be exchanged without the need for special tools. A blockage can be easily removed by pivoting the chopping unit (hydraulic actuation optional). For sharpening the chopping unit can be easily lowered and for more major maintenance jobs, the unit can be placed on special service wheels.Heavy duty floor for rapid dischargeThe hydraulic floor chain runs smoothly. It consists of two 10 mm chains with a breaking strength of 12.5 tonnes each, and robust carriers, which ensure that the wagon is unloaded quickly and safely. For extreme conditions 4-chain strands with offset carriers can be supplied as an option in lieu.31 LELY TIGOAutomatic stop-loadA pressure switch in the hydraulic circuit of the tailgate (S Profi models) or a sensor on the lower discharge roller (SD Profi models) monitors the loading pressure and automatically switches off the floor chain to prevent overloading of the wagon. At the same time the driver hears an acoustic signal (buzzer in the control box) reporting that loading is complete.Heavy duty floor for rapid dischargeThe hydraulic floor chain runs smoothly. It consists of two 10 mm chains with a breaking strength of 12.5 tonnes each, and robust carriers, which ensure that the wagon is unloaded quickly and safely. For extreme conditions 4-chain strands with offset carriers can be supplied as an option in lieu.Comfortable and stable running gearThe robust tandem axle unit offers maximum comfort and stability. The wagon may be equipped if required with a 14-tonne running gear which can be fitted with 710/35 R 22.5 tyres in order to minimise turf damage. All vehicles can be equipped with a two terminal compressed air system (four-wheel braking system) with ALB (automatic load-dependent brakes).Lely Tigo SD Profi with perfect dischargeTigo SD Profi automatic loading wagons are standardly equipped with two discharge rollers (optionally three). The discharge system distributes the forage evenly across the silo. All SD models contain a floor chain with forward/reverse operation. The chain speed can be steplessly adjusted at the control box. A double wide angle PTO shaft is standard. Foldable superstructureThe Tigo S Profi is available with a hydraulically foldable roughage superstructure. An ideal option for low clearances.Large load volume Tigo 60 & 70 S ProfiThe 60 S Profi (60 m³ at medium compaction) and 70 S Profi (70 m³ at medium compaction) models have been specially developed for farms that require large loading capacities for stalk material and have long distances to drive. They therefore achieve a high degree of economy and efficiency. Discharge conveyorThe Tigo SD Profi can also be fitted with an optional hydraulically driven side discharge conveyor. This can be switched over to discharge to left or right and the belt width of 700 mm always ensures optimum transfer to the feeding area or fans. The side discharge conveyor can be simply swung under the wagon bridge for use in the silo.32Lely Tigo R The entry level models of rotary loader wagons in the Tigo series are derived from the larger Tigo R Profi wagons. By adopting selected main features of these giants, a series of wagons has been created which offer higher capacity for progressive livestock farmers. The unique Tigo rotor ensures efficient chopping and loading. The camless pick-up is extremely low maintenance. Increased loading volumes make these machines exceptionally economical.33 LELY TIGOOptimum forage intake with five bar pick-upThe camless pick-up on the Tigo R wagons has a working width of 1.80 m and has five non-steered tine bars with tines spaced 54 mm apart. This maintenance free pick-up consistently delivers clean work due to the fine-tuning of the pick-up rotational speed to that of the chopping rotor.Chopping qualityThe Tigo R chopping unit can be operated in two groups and can be fitted with 31 knives. This results in a minimum chopping length of 45 mm. The wide edges on the rotor tines together with these knives provide a highly precise chopping action. The knives are individually protected with the Trimatic knife protection system.Unique in its class: gear-driven rotorThe chopping rotor of the Tigo R model is driven by extra heavy duty gears, which enables fluctuating loads to be handled with optimal efficiency. The direct driven rotor of the Tigo R stand out due to their smooth running and unapparelled durability.Camless pick-upThe 1.80 m pick-up consists of five rows of spring tines which are spaced 54 mm apart, giving unrivalled crop handling ability.Rotor driveThe main drive of the Tigo R is via heavy duty spur gears.34RRDHeavy duty floor for rapid dischargeThe hydraulic floor chain runs smoothly. It consists of two 10 mm chains with a breaking strength of 12.5 tonnes each, and robust carriers, which ensure that the wagon is unloaded quickly and safely. For extreme conditions 4-chain strands with offset carriers can be supplied as an option in lieu.Comfortable and stable running gearThe robust tandem axle unit offers maximum comfort and stability. The wagon may be equipped if required with a 16-tonne running gear which can be fitted with 710/35 R22.5 tyres in order to minimise turf damage. All vehicles can be equipped with a two terminal compressed air system (four-wheel braking system) with ALB (automatic load-dependent brakes).Automatic loading system (optional equipment)The automatic loading system ensures optimum loading of the wagon so that each journey made is to maximum efficiency. The chopping rotor thrusts the crop upwards until a sensor in the roof is activated. Next, the floor shifts the load by a small amount at a time towards the back of the wagon until a second sensor at the tailgate detects that the maximum load has been taken on board and reports ‘Wagon full’. At the same time, the driver will receive an acoustic signal from their operator unit.SuperstructureThe Tigo R is available with a hydraulically foldable roughage superstructure. An ideal option for low clearances.Electromagnetic controlThe standard electro-hydraulic control on the Tigo R loader wagon enables all functions to be operated easily direct from the tractor cab.Option: ISOBUS control for RD modelsLoader wagons featuring the optional ISOBUS control can be operated by means of the standard control or through the tractor terminal. Due to the interface with the loader wagon, all functions can be controlled by the joystick in the tractor cab, which means optimal ease of control.35 LELY TIGOLely Tigo RD – perfect dischargingEvery Tigo R loader wagon is available as an RD model with two or three discharge rollers. This discharge system spreads the forage evenly across the silo. All RD models have a floor forward feed and reversing feed function and are equipped with a double wide-angle PTO shaft.If required the Tigo RD can also be fitted with a hydraulically driven side discharge conveyor (optional equipment). This can be switched over to discharge to left or right and the belt width of 700 mm always ensures optimum transfer to the feeding area or fans.36Lely Tigo R ProfiLarge livestock farmers and contractors must be able to rely on high capacity and reliability if large quantities of forage are to be harvested. The Lely Tigo R Profi range of loader wagons was developed with this in mind. Speed and efficiency characterise these R Profi models in which unequalled chopping quality provides the best forage.37 LELY TIGOOptimum intake with 7-row pick-upThe camless pick-up on the Tigo R Profi models have seven tine bars with tines spaced 54 mm apart. This maintenance free pick-up consistently delivers clean work due to the fine tuning of the pick-up rotational speed relative to that of the chopping rotor.Perfect chopping qualityThe Tigo R Profi chopping unit can be operated in two groups and is fitted with 40 knives. This results in a minimum chopping length of 37 mm. The 25-mm wide edges on the rotor tines and the resulting narrow chopping gap provide a highly precise chopping action. The knives are individually protected with the Trimatic knife protection system.Maintenance-free drive with oil bathThe rotor is directly driven via an oil immersed drive. Direct drive means optimum transmission of power from the tractor to the loader wagon. A cam-type clutch protects the drive line against overloads. This maintenance free drive ensures many years of service at minimal cost.Robust steel structureThe body is equipped with ropes on top to restrict the load bay and to prevent spillage. The straight sides contribute towards a rapid unloading action and prevent bridging.Pivotable chopping unitThe knives are easily accessible as the chopping unit can be pivoted to the side.38Lely Tigo RD – perfect dischargingEvery Tigo R Profi loader wagon is available as an RD model with two or three discharge rollers. This discharge system spreads the forage evenly across the silo. The RD wagon can also be equipped with a hydraulically driven side discharge conveyor (optional) allowing forage to be discharged to the left or right-hand side of the machine. 700 mm belt width for optimum transfer to the feeding area or fans. All RD models have a floor forward feed and reversing feed function and are equipped with a double wide-angle PTO shaft as standard.Heavy-duty floor for rapid discharge Four high grade annealed chains, 10 mm in diameter with an overall breaking strength of 50 tonnes, and offset carriers ensure reliable loading and discharge action. A 2-stage hydraulic motor with a rapid motion option is a standard feature on all Lely Tigo R Profi models.High Performance ChassisThese loader wagons are equipped as standard with a tandem bogie axle unit and a rear steering axle. The enormous suspension travel ensures even load distribution as well as optimum ground contour flotation. Forced steering is available as an option. These Loader wagons can be fitted with tyres up to 800/45 R26.5.Automatic loading systemThe automatic loading system ensures optimum loading of the wagon so that each journey made is to maximum efficiency. The chopping rotor thrusts the crop upwards until a sensor in the roof is activated. The floor then shifts the load by a small amount at a time towards the rear where a second sensor at the tailgate detects that the maximum load has been taken on board and reports ‘Wagon full’. At the same time, the driver will receive an acoustic and optical signal from their operator unit.39 LELY TIGO40Lely Tigo R CombiIn order to make even better use of the high capacity of loader wagons, the Lely Tigo R Profi models have been developed as ‘dual purpose wagons’ – the R Combi. These models make excellent silage transport wagons too. Thanks to this flexibility, there is no longer any need for investment in an extra silage trailer. The steel superstructure, which has no tubular bows or tension ropes, is perfectly capable of withstanding the loads imposed by heavy silage. Using the hydraulically foldable bulkhead and the feed channel cover, the Tigo R Combi can be turned from a loader wagon into a silage transport wagon within minutes. 41 LELY TIGOOil immersed rotor driveThe rotor is directly driven via an oil immersed drive. Direct drive means optimum transmission of power from the tractor to the loader wagon. A cam-type clutch protects the drive line against overloads. This maintenance free drive ensures many years of service at minimal cost.Heavy-duty floor for rapid dischargeFour high-grade annealed chains, 10 mm in diameter with an overall breaking strength of 50 tonnes, and offset carriers ensure reliable loading and discharge action. A 2-stage hydraulic motor with a rapid motion option is a standard feature on all Lely Tigo R Combi models.Lely Tigo RD – perfect dischargeEvery Tigo R Combi is available as an RD model with three discharge rollers. Three powerful and enclosed discharge rollers spread out both maize and grass silage precisely and ensure that crops are distributed evenly. All RD models contain an automatic discharge system and are fitted with a double wide-angle PTO shaft.High-performance chassisAll Tigo 60 R Combi machines are equipped with a bogie tandem axle unit. The Tigo 70 R Combi models always contain a hydro-pneumatic chassis with automatic levelling. A hydro-pneumatic tridem axle unit controlled by forced steering can also be selected as an option with this series, which provides a permissible total weight of up to 30 tonnes. Load distribution and generously-dimensioned tyres ensure that the machine is gentle on the ground whilst providing maximum driving comfort.ISOBUS – maximum ease of operationAll Tigo R Combi wagons are equipped with the newly developed ISOBUS control system. Using the ISOBUS onboard computer, the wagon can either be operated by the control unit included in delivery or from the tractor terminal. The ISOBUS control provides the driver with additional functions such as:• Speed dependent locking of the steering axle.• Level control with hydro-pneumatic suspension.• Weighing system (optional).• Integrated diagnosis system.42100% loader wagonWorking with a loader wagon is the quickest way to harvest your crops. The Lely Tigo R Combi can finely chop grass and has a large loading capacity.Optimum intake with 7-row pick-upThe camless pick-up on the Tigo R Combi models has seven tine bars with tines spaced 54 mm apart. This maintenance free pick-up consistently delivers clean work due to the fine tuning of the pick-up rotational speed relative to that of the chopping rotor.High-performance chopping unitThe Tigo R Combi chopping unit can be operated in two groups and is fitted with 40 knives. This results in a minimum chopping length of 37 mm. The 25-mm wide edges on the rotor tines and the resulting narrow chopping gap provide a highly precise chopping action. The knives are individually protected with the Trimatic knife protection system.Automatic loading systemThe automatic loading system ensures optimum loading of the wagon so that each journey made is maximised. The chopping rotor thrusts the crop upwards until a sensor in the roof is activated. The floor then shifts the load by a small amount at a time towards the rear where a second sensor at the tailgate detects that the maximum load has been taken on board and reports ‘Wagon full’. At the same time, the driver will receive an acoustic signal from their operator unit.43 LELY TIGONewly develope tailgateThe newly developed tailgate is tightly sealed, safe-guarded against overloading and is fitted with a stable and secure closing system. The wagon is opened and closed electro-hydraulically.Robust superstructureThe heavy duty all steel superstructure has no tubular bows and tension ropes. Even the pre-compaction wall required for loader wagon operation does not have to be removed. By hydraulically folding down the front wall and covering the feed channel, the R Combi can be converted from a loader wagon into a silage transport wagon within minutes.Fold-down bulkheadOn the Tigo R Combi, the top section of the bulkhead can be tipped forward hydraulically using the push button control monitor in the tractor. This makes it easier for the forage harvester to load the wagon at the front when starting in a field. In addition, the operator has a good view of the load bay. Blanking off the intake ductThe cover plate on the Lely Tigo R Combi can be quickly and easily installed and removed without the use of tools. The sizeable access hatch in the side wall of the wagon ensures that the intake duct is easily accessible.100% silage transport wagonThe Lely Tigo R Combi can be converted from a loader wagon into a silage transport wagon within minutes.44Lely Tigo T The use of modern and powerful transport vehicles is extremely important for harvesting efficiency. An important link in the chain is having the correct vehicle for transporting chopped material. With their new Tigo T series, Lely presents a top class silage transport wagon which impresses with its enormous effective load capacity and its ease of operation.45 LELY TIGOFoldable bulkheadIn order to fill the load bay from the front, the Lely Tigo T allows you to fold the upper part of the bulkhead forwards hydraulically. You can operate this function from the tractor cab.Comfortable accessWagons with discharge rollers have a generously dimensioned access door. For maintenance and cleaning work, you can easily access the load bay via the foldable access ladder.Easy operationThe Lely Tigo is operated via the tractor hydraulics. However, an electro-hydraulic control option is available on request, through which all hydraulic functions can be easily controlled.Drawbar suspensionThe Lely Tigo T can be fitted with an optional hydraulic drawbar suspension for maximum driving comfort. This also serves as a hydraulic parking support for safe coupling and uncoupling of the loader wagon.High-performance floor drive and powerful discharge rollersWith its hydraulically operated floor and the spur gear with triple speed reduction, the Lely Tigo T is also capable of shifting the heaviest of loadings safely and reliably. As an option, it can be equipped with a 2-stage hydraulic motor for quick discharge. The Lely Tigo T can also be fitted with two or three powerful discharge rollers, which loosen up the silage and spread it evenly onto the silo.Safety unloadingCompared to tipping trailers, unloading on slopes or uneven ground is safer and more controlled with a silage transport wagon.46Technical specificationsS = Standard / O =Option / X = Not available on this machineTIGO Volume (DIN) (m³)Capacity (medium compaction)* (m³)Max. permissible weight (kg)Feed unitNumber of swing armsNumber of tine rows rotorMax. number of knivesMinimum chop length (mm)Working width pick-up (DIN) (m)Number of tine bars pick upTine spacing on pick-up (mm)Ground clearance pick-up (m)Empty weight (approx.) (kg)Max. weight on draw bar (kg)Width (m)Length (m)Height** (m)Transport height folded (Hydro)** (m)Loading deck height** (m)Loading area width (m)Loading area length (m)Track width (m)Standard tyresMax. speed (km/h)PTO speed (rpm)Number of discharge rollersCross conveyor beltDrive load deck by tractor hydraulicsElectro hydraulic comfort controlISOBUS ControlAutomatic load-dependent air brakesHydraulic brakesLoad sensing-ready2-stage hydraulic floor drive2-stage automatic loading systemTop limiting coverLoading area coverWeighing system14 Ton tandem, twist beam suspended16 Ton tandem, twist beam suspended20 Ton bogie tandem 22.5"23 Ton bogie tandem 26.5"23 Ton tandem with hydraulic alignment 26.5"23 Ton tandem hydro-pneumatically suspension 26.5"30 Ton hydro-pneumatic tridemTrailed steering tandemForced steering tandemHydraulically lowered chopping unit35 S Classic 22 34 5,800 Swing arms 3 - 33 38 1.80 5 54 0.40 - 0.70 2,100 1,000 2.40 8.05 3.25 2.25 1.10 1.65 4.85 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O35 S 22 34 6,200 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 2,380 1,000 2.40 8.05 3.25 2.25 1.10 1.65 4.85 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O40 S 24.5 37 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,100 1,000 2.40 8.65 3.4 2.45 1.10 1.65 5.45 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O50 S 29 47 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,420 1,000 2.40 8.65 3.4 2.45 1.10 1.65 6.15 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O25 ST Classic 26 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,200 1,500 2.45 8.05 3.55 2.85 1.21 2.16 5.35 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O35 ST Classic 30 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,170 1,500 2.45 8.70 3.55 2.85 1.21 2.16 6.00 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O35 ST 35 60 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,380 1,500 2.45 9.55 3.65 2.90 1.21 2.16 6.85 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O40 ST 39 70 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,980 1,500 2.45 10.40 3.65 2.90 1.21 2.16 7.70 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O50 ST 29 47 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,270 1,000 2.40 8.65 3.00 2.00 1.00 1.65 6.15 2.12 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O40 S Profi 26 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,200 1,500 2.45 8.05 3.55 3.00 1.21 2.16 5.35 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O50 S Profi 30 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,170 1,500 2.45 8.70 3.55 3.00 1.21 2.16 6.00 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O60 S Profi 35 60 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,380 1,500 2.45 9.55 3.65 3.00 1.21 2.16 6.85 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O70 S Profi 39 70 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,980 1,500 2.45 10.40 3.65 3.00 1.21 2.16 7.70 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O40 SD Profi 25.7/28.7*** 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,700 1,500 2.50 8.75 3.65 3.00 1.21 2.16 5.35 1.80 500/50-17 10 PR 40 540 2/3 O S S X S O O O X O X X O X X X X X X O X O50 SD Profi 28.7/31.7*** 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,630 1,500 2.50 9.40 3.65 3.00 1.21 2.16 6.00 1.80 500/50-17 10 PR 40 540 2/3 O S S X S O O O X O X X O X X X X X X O X O40 R 26 40 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 4,400 2,000/3,000 2.45 8.05 3.55 3.00 1.21 2.16 5.35 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S50 R 30 50 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,370 2,000/3,000 2.45 8.70 3.55 3.00 1.21 2.16 6.00 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S60 R 35 60 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,580 2,000/3,000 2.45 10.45 3.55 3.00 1.21 2.16 6.85 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S40 RD 25.7/28.7*** 40 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 4,900 2,000/3,000 2.50 8.75 3.65 3.00 1.21 2.16 5.35 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S50 RD 28.7/31.7*** 50 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,830 2,000/3,000 2.50 9.40 3.65 3.00 1.21 2.16 6.00 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S60 RD 33.8/36.8*** 60 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,950 2,000/3,000 2.50 11.10 3.65 3.00 1.21 2.16 6.85 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S45 R Profi 30 45 16,000 Rotor - 7 40 37 1.9 7 54 0.40 - 0.70 5,480 1,500 2.45 8.7 3.75 - 1.4 2.16 6 1.95 500/55-20 40 1,000 X X S X S S O S O S X X X X S X X X X X O O S50 R Profi 30 50 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,150 2,000/3,000 2.45 8.70 3.85 - 1.50 2.16 6.00 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O X S O S60 R Profi 35 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,800 2,000/3,000 2.45 9.55 3.85 - 1.50 2.16 6.85 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O X S O S70 R Profi 39 68 20,000/23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,400 2,000/3,000 2.45 10.40 3.85 - 1.50 2.16 7.70 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O O S O S45 RD Profi 28.8/31.8*** 45 16,000 Rotor - 7 40 37 1.9 7 54 0.40 - 0.70 5,940 1,500 2.45 9.4 3.75 - 1.4 2.16 6 1.95 500/55-20 40 1,000 2/3 O S X S S O S O S X X X X S X X X X X O O S50 RD Profi 28.8/31.8*** 50 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,310 2,000/3,000 2.50 9.40 3.85 - 1.50 2.16 6.00 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O X S O S50 RD Profi 33.8/36.8*** 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,950 2,000/3,000 2.50 10.25 3.85 - 1.50 2.16 6.85 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O X S O S50 RD Profi 38.8/41.8*** 68 20,000/23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,560 2,000/3,000 2.50 11.10 3.85 - 1.50 2.16 7.70 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O O S O S60 R Combi 36.5 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,500 2,000/3,000 2.45 9.60 3.95 - 1.50 2.16 7.00 1.95/2.15 710/45-22.5 40 1,000 X X S X S S O S S S X O O X X S O O O X S O S70 R Combi 41.5 68 23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 8,200 2,000/3,000 2.45 10.45 3.95 - 1.65 2.16 7.85 2.15 710/50 R26.5 40 1,000 X X S X S S O S S S X O O X X X X O S O S O S60 RD Combi 34.8/36.5*** 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,650 2,000/3,000 2.50 9.60 3.95 - 1.50 2.16 7.00 1.95/2.15 710/45-22.5 40 1,000 3 X S X S S O S S S X O O X X S O O O X S O S70 RD Combi 39.5/41.5*** 68 23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 8,400 2,000/3,000 2.50 10.45 3.95 - 1.65 2.16 7.85 2.15 710/50 R26.5 40 1,000 3 X S X S S O S S S X O O X X X X O S O S O S60 T 38 60 20,000/23,000 - - - - - - - - - 5,700 2,000/3,000 2.50 9.20 3.95 - 1.50 2.16 7.00 1.95/2.15 550/60-22.5 40 1,000 2/3 X S O X S O O O X X O X X X S O X X X S O X70 T 42 70 20,000/23,000 - - - - - - - - - 6,400 2,000/3,000 2.50 10.05 3.95 - 1.50 2.16 7.85 1.95/2.15 550/60-22.5 40 1,000 2/3 X S O X S O O O X X O X X X S O X X X S O X47 LELY TIGO47S = Standard / O =Option / X = Not available on this machine * Depending on crop conditions / ** With standard tyres / *** Without discharge rollers fittedTIGO Volume (DIN) (m³)Capacity (medium compaction)* (m³)Max. permissible weight (kg)Feed unitNumber of swing armsNumber of tine rows rotorMax. number of knivesMinimum chop length (mm)Working width pick-up (DIN) (m)Number of tine bars pick upTine spacing on pick-up (mm)Ground clearance pick-up (m)Empty weight (approx.) (kg)Max. weight on draw bar (kg)Width (m)Length (m)Height** (m)Transport height folded (Hydro)** (m)Loading deck height** (m)Loading area width (m)Loading area length (m)Track width (m)Standard tyresMax. speed (km/h)PTO speed (rpm)Number of discharge rollersCross conveyor beltDrive load deck by tractor hydraulicsElectro hydraulic comfort controlISOBUS ControlAutomatic load-dependent air brakesHydraulic brakesLoad sensing-ready2-stage hydraulic floor drive2-stage automatic loading systemTop limiting coverLoading area coverWeighing system14 Ton tandem, twist beam suspended16 Ton tandem, twist beam suspended20 Ton bogie tandem 22.5"23 Ton bogie tandem 26.5"23 Ton tandem with hydraulic alignment 26.5"23 Ton tandem hydro-pneumatically suspension 26.5"30 Ton hydro-pneumatic tridemTrailed steering tandemForced steering tandemHydraulically lowered chopping unit35 S Classic 22 34 5,800 Swing arms 3 - 33 38 1.80 5 54 0.40 - 0.70 2,100 1,000 2.40 8.05 3.25 2.25 1.10 1.65 4.85 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O35 S 22 34 6,200 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 2,380 1,000 2.40 8.05 3.25 2.25 1.10 1.65 4.85 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O40 S 24.5 37 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,100 1,000 2.40 8.65 3.4 2.45 1.10 1.65 5.45 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O50 S 29 47 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,420 1,000 2.40 8.65 3.4 2.45 1.10 1.65 6.15 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O25 ST Classic 26 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,200 1,500 2.45 8.05 3.55 2.85 1.21 2.16 5.35 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O35 ST Classic 30 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,170 1,500 2.45 8.70 3.55 2.85 1.21 2.16 6.00 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O35 ST 35 60 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,380 1,500 2.45 9.55 3.65 2.90 1.21 2.16 6.85 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O40 ST 39 70 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,980 1,500 2.45 10.40 3.65 2.90 1.21 2.16 7.70 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O50 ST 29 47 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,270 1,000 2.40 8.65 3.00 2.00 1.00 1.65 6.15 2.12 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O40 S Profi 26 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,200 1,500 2.45 8.05 3.55 3.00 1.21 2.16 5.35 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O50 S Profi 30 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,170 1,500 2.45 8.70 3.55 3.00 1.21 2.16 6.00 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O60 S Profi 35 60 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,380 1,500 2.45 9.55 3.65 3.00 1.21 2.16 6.85 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O70 S Profi 39 70 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,980 1,500 2.45 10.40 3.65 3.00 1.21 2.16 7.70 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O40 SD Profi 25.7/28.7*** 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,700 1,500 2.50 8.75 3.65 3.00 1.21 2.16 5.35 1.80 500/50-17 10 PR 40 540 2/3 O S S X S O O O X O X X O X X X X X X O X O50 SD Profi 28.7/31.7*** 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,630 1,500 2.50 9.40 3.65 3.00 1.21 2.16 6.00 1.80 500/50-17 10 PR 40 540 2/3 O S S X S O O O X O X X O X X X X X X O X O40 R 26 40 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 4,400 2,000/3,000 2.45 8.05 3.55 3.00 1.21 2.16 5.35 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S50 R 30 50 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,370 2,000/3,000 2.45 8.70 3.55 3.00 1.21 2.16 6.00 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S60 R 35 60 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,580 2,000/3,000 2.45 10.45 3.55 3.00 1.21 2.16 6.85 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S40 RD 25.7/28.7*** 40 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 4,900 2,000/3,000 2.50 8.75 3.65 3.00 1.21 2.16 5.35 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S50 RD 28.7/31.7*** 50 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,830 2,000/3,000 2.50 9.40 3.65 3.00 1.21 2.16 6.00 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S60 RD 33.8/36.8*** 60 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,950 2,000/3,000 2.50 11.10 3.65 3.00 1.21 2.16 6.85 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S45 R Profi 30 45 16,000 Rotor - 7 40 37 1.9 7 54 0.40 - 0.70 5,480 1,500 2.45 8.7 3.75 - 1.4 2.16 6 1.95 500/55-20 40 1,000 X X S X S S O S O S X X X X S X X X X X O O S50 R Profi 30 50 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,150 2,000/3,000 2.45 8.70 3.85 - 1.50 2.16 6.00 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O X S O S60 R Profi 35 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,800 2,000/3,000 2.45 9.55 3.85 - 1.50 2.16 6.85 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O X S O S70 R Profi 39 68 20,000/23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,400 2,000/3,000 2.45 10.40 3.85 - 1.50 2.16 7.70 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O O S O S45 RD Profi 28.8/31.8*** 45 16,000 Rotor - 7 40 37 1.9 7 54 0.40 - 0.70 5,940 1,500 2.45 9.4 3.75 - 1.4 2.16 6 1.95 500/55-20 40 1,000 2/3 O S X S S O S O S X X X X S X X X X X O O S50 RD Profi 28.8/31.8*** 50 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,310 2,000/3,000 2.50 9.40 3.85 - 1.50 2.16 6.00 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O X S O S50 RD Profi 33.8/36.8*** 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,950 2,000/3,000 2.50 10.25 3.85 - 1.50 2.16 6.85 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O X S O S50 RD Profi 38.8/41.8*** 68 20,000/23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,560 2,000/3,000 2.50 11.10 3.85 - 1.50 2.16 7.70 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O O S O S60 R Combi 36.5 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,500 2,000/3,000 2.45 9.60 3.95 - 1.50 2.16 7.00 1.95/2.15 710/45-22.5 40 1,000 X X S X S S O S S S X O O X X S O O O X S O S70 R Combi 41.5 68 23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 8,200 2,000/3,000 2.45 10.45 3.95 - 1.65 2.16 7.85 2.15 710/50 R26.5 40 1,000 X X S X S S O S S S X O O X X X X O S O S O S60 RD Combi 34.8/36.5*** 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,650 2,000/3,000 2.50 9.60 3.95 - 1.50 2.16 7.00 1.95/2.15 710/45-22.5 40 1,000 3 X S X S S O S S S X O O X X S O O O X S O S70 RD Combi 39.5/41.5*** 68 23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 8,400 2,000/3,000 2.50 10.45 3.95 - 1.65 2.16 7.85 2.15 710/50 R26.5 40 1,000 3 X S X S S O S S S X O O X X X X O S O S O S60 T 38 60 20,000/23,000 - - - - - - - - - 5,700 2,000/3,000 2.50 9.20 3.95 - 1.50 2.16 7.00 1.95/2.15 550/60-22.5 40 1,000 2/3 X S O X S O O O X X O X X X S O X X X S O X70 T 42 70 20,000/23,000 - - - - - - - - - 6,400 2,000/3,000 2.50 10.05 3.95 - 1.50 2.16 7.85 1.95/2.15 550/60-22.5 40 1,000 2/3 X S O X S O O O X X O X X X S O X X X S O X47 LELY TIGO4847TIGO Volume (DIN) (m³)Capacity (medium compaction)* (m³)Max. permissible weight (kg)Feed unitNumber of swing armsNumber of tine rows rotorMax. number of knivesMinimum chop length (mm)Working width pick-up (DIN) (m)Number of tine bars pick upTine spacing on pick-up (mm)Ground clearance pick-up (m)Empty weight (approx.) (kg)Max. weight on draw bar (kg)Width (m)Length (m)Height** (m)Transport height folded (Hydro)** (m)Loading deck height** (m)Loading area width (m)Loading area length (m)Track width (m)Standard tyresMax. speed (km/h)PTO speed (rpm)Number of discharge rollersCross conveyor beltDrive load deck by tractor hydraulicsElectro hydraulic comfort controlISOBUS ControlAutomatic load-dependent air brakesHydraulic brakesLoad sensing-ready2-stage hydraulic floor drive2-stage automatic loading systemTop limiting coverLoading area coverWeighing system14 Ton tandem, twist beam suspended16 Ton tandem, twist beam suspended20 Ton bogie tandem 22.5"23 Ton bogie tandem 26.5"23 Ton tandem with hydraulic alignment 26.5"23 Ton tandem hydro-pneumatically suspension 26.5"30 Ton hydro-pneumatic tridemTrailed steering tandemForced steering tandemHydraulically lowered chopping unit35 S Classic 22 34 5,800 Swing arms 3 - 33 38 1.80 5 54 0.40 - 0.70 2,100 1,000 2.40 8.05 3.25 2.25 1.10 1.65 4.85 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O35 S 22 34 6,200 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 2,380 1,000 2.40 8.05 3.25 2.25 1.10 1.65 4.85 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O40 S 24.5 37 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,100 1,000 2.40 8.65 3.4 2.45 1.10 1.65 5.45 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O50 S 29 47 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,420 1,000 2.40 8.65 3.4 2.45 1.10 1.65 6.15 1.65/1.80 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O25 ST Classic 26 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,200 1,500 2.45 8.05 3.55 2.85 1.21 2.16 5.35 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O35 ST Classic 30 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,170 1,500 2.45 8.70 3.55 2.85 1.21 2.16 6.00 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O35 ST 35 60 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,380 1,500 2.45 9.55 3.65 2.90 1.21 2.16 6.85 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O40 ST 39 70 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,980 1,500 2.45 10.40 3.65 2.90 1.21 2.16 7.70 2.12 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O50 ST 29 47 8,000/11,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 3,270 1,000 2.40 8.65 3.00 2.00 1.00 1.65 6.15 2.12 15.0/55-17 10 PR 40 540 X X S O X O O O X X O X X X X X X X X X X X O40 S Profi 26 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,200 1,500 2.45 8.05 3.55 3.00 1.21 2.16 5.35 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O50 S Profi 30 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,170 1,500 2.45 8.70 3.55 3.00 1.21 2.16 6.00 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O60 S Profi 35 60 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,380 1,500 2.45 9.55 3.65 3.00 1.21 2.16 6.85 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O70 S Profi 39 70 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,980 1,500 2.45 10.40 3.65 3.00 1.21 2.16 7.70 1.80 500/50-17 10 PR 40 540 X X S S X S O O O X O X X O X X X X X X O X O40 SD Profi 25.7/28.7*** 40 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 4,700 1,500 2.50 8.75 3.65 3.00 1.21 2.16 5.35 1.80 500/50-17 10 PR 40 540 2/3 O S S X S O O O X O X X O X X X X X X O X O50 SD Profi 28.7/31.7*** 50 11,000/14,000 Swing arms 5 - 33 38 1.80 5 54 0.40 - 0.70 5,630 1,500 2.50 9.40 3.65 3.00 1.21 2.16 6.00 1.80 500/50-17 10 PR 40 540 2/3 O S S X S O O O X O X X O X X X X X X O X O40 R 26 40 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 4,400 2,000/3,000 2.45 8.05 3.55 3.00 1.21 2.16 5.35 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S50 R 30 50 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,370 2,000/3,000 2.45 8.70 3.55 3.00 1.21 2.16 6.00 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S60 R 35 60 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,580 2,000/3,000 2.45 10.45 3.55 3.00 1.21 2.16 6.85 1.80/1.95 500/50-17 10 PR 40 1,000 X X S S X S O O O O X X X O O X X X X X O O S40 RD 25.7/28.7*** 40 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 4,900 2,000/3,000 2.50 8.75 3.65 3.00 1.21 2.16 5.35 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S50 RD 28.7/31.7*** 50 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,830 2,000/3,000 2.50 9.40 3.65 3.00 1.21 2.16 6.00 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S60 RD 33.8/36.8*** 60 11,000/14,000/16,000 Rotor - 5 31 45 1.80 5 54 0.40 - 0.70 5,950 2,000/3,000 2.50 11.10 3.65 3.00 1.21 2.16 6.85 1.80/1.95 500/50-17 10 PR 40 1,000 2/3 O S S O S O O O O X X X O O X X X X X O O S45 R Profi 30 45 16,000 Rotor - 7 40 37 1.9 7 54 0.40 - 0.70 5,480 1,500 2.45 8.7 3.75 - 1.4 2.16 6 1.95 500/55-20 40 1,000 X X S X S S O S O S X X X X S X X X X X O O S50 R Profi 30 50 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,150 2,000/3,000 2.45 8.70 3.85 - 1.50 2.16 6.00 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O X S O S60 R Profi 35 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,800 2,000/3,000 2.45 9.55 3.85 - 1.50 2.16 6.85 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O X S O S70 R Profi 39 68 20,000/23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,400 2,000/3,000 2.45 10.40 3.85 - 1.50 2.16 7.70 1.95/2.15 550/60-22.5 40 1,000 X X S X S S O S O S X X O X X S O O O O S O S45 RD Profi 28.8/31.8*** 45 16,000 Rotor - 7 40 37 1.9 7 54 0.40 - 0.70 5,940 1,500 2.45 9.4 3.75 - 1.4 2.16 6 1.95 500/55-20 40 1,000 2/3 O S X S S O S O S X X X X S X X X X X O O S50 RD Profi 28.8/31.8*** 50 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,310 2,000/3,000 2.50 9.40 3.85 - 1.50 2.16 6.00 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O X S O S50 RD Profi 33.8/36.8*** 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 6,950 2,000/3,000 2.50 10.25 3.85 - 1.50 2.16 6.85 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O X S O S50 RD Profi 38.8/41.8*** 68 20,000/23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,560 2,000/3,000 2.50 11.10 3.85 - 1.50 2.16 7.70 1.95/2.15 550/60-22.5 40 1,000 2/3 O S X S S O S O S X X O X X S O O O O S O S60 R Combi 36.5 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,500 2,000/3,000 2.45 9.60 3.95 - 1.50 2.16 7.00 1.95/2.15 710/45-22.5 40 1,000 X X S X S S O S S S X O O X X S O O O X S O S70 R Combi 41.5 68 23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 8,200 2,000/3,000 2.45 10.45 3.95 - 1.65 2.16 7.85 2.15 710/50 R26.5 40 1,000 X X S X S S O S S S X O O X X X X O S O S O S60 RD Combi 34.8/36.5*** 58 20,000/23,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 7,650 2,000/3,000 2.50 9.60 3.95 - 1.50 2.16 7.00 1.95/2.15 710/45-22.5 40 1,000 3 X S X S S O S S S X O O X X S O O O X S O S70 RD Combi 39.5/41.5*** 68 23,000/30,000 Rotor - 7 40 37 1.90 7 54 0.40 - 0.70 8,400 2,000/3,000 2.50 10.45 3.95 - 1.65 2.16 7.85 2.15 710/50 R26.5 40 1,000 3 X S X S S O S S S X O O X X X X O S O S O S60 T 38 60 20,000/23,000 - - - - - - - - - 5,700 2,000/3,000 2.50 9.20 3.95 - 1.50 2.16 7.00 1.95/2.15 550/60-22.5 40 1,000 2/3 X S O X S O O O X X O X X X S O X X X S O X70 T 42 70 20,000/23,000 - - - - - - - - - 6,400 2,000/3,000 2.50 10.05 3.95 - 1.50 2.16 7.85 1.95/2.15 550/60-22.5 40 1,000 2/3 X S O X S O O O X X O X X X S O X X X S O X49 LELY TIGOAW AS Multi-Service Flotation + 558 Twin 404/I-328 Flotation Pro Cargo X BIBS = Standard / O =Option / X = Not available on this machine Lely reserves the right to select the tyre manufacturer.TyresLELY TIGO Air pressureLoad capacity 25 km/h (40 km/h)Tyre diameterTyre width in operation (mm)Wheel rim sizeWheel studsTread pattern11.5/80-15.3 Imp 10 PR 4.60 2,410 (1,930) 845 305 9.00 x 15.3 6 AW15.0/55-17 Imp 10 PR 3.60 2,600 (2,080) 850 411 13.00 x 17 6 AW/AS19.0/45-17 Imp 10 PR 2.90 2,950 (2,360) 860 505 16.00 x 17 6 AW/AS500/50-17 Imp 10 PR 2.75 3,375 (2,825) 940 525 16.00 x 17 6 AW505/50-17 MPT 12 PR 5.00 4,000 (3,450) 933 502 16.00 x 17 6 Multi-Service500/55-20 12 PR 3.25 3,875 (3,875) 1,060 500 16.00 x 20 8 Flotation +500/45-22.5 16 PR 3.60 3,750 1,015 500 16.00 x 22.5 8 558550/60-22.5 2.60 4,810 1,230 550 16.00 x 22.5 10 Twin 404560/45 R22.5 4.00 4,740/4,080 1,085 545 16.00 x 22.5 8 Flotation PRO600/55-22.5 2.60 6,100 (5,125) 1,240 625 20.00 x 22.5 10 Flotation +620/40 R22.5 3.20 4,980 (4,280) 1,080 610 20.00 x 22.5 8 Flotation PRO650/50 R22.5 3.20 6,500 (5,600) 1,250 645 20.00 x 22.5 10 Flotation PRO710/35 R22.5 4.00 5,620 1,069 720 24.00 x 22.5 8 County King710/45-22.5 2.25 5,660 (5,660) 1,240 730 24.00 x 22.5 10 Flotation +710/40 R22.5 3.20 6,300 (5,440) 1,170 705 24.00 x 22.5 10 Flotation PRO710/50 R26.5 1.80 6,900 (5,800) 1,370 700 24.00 x 26.5 10 Flotation PRO800/45 R26.5 4.00 10,600 (9,100) 1,340 800 28.00 x 26.5 10 Flotation PRO560/60 R22.5 161D TL 4.00 6,980 (6,290) 1,251 570 16.00 x 22.5 10 Cargo X BIB600/50 R22.5 159D TL 4.00 6,610 (6,950) 1,181 616 20.00 x 22.5 10 Cargo X BIB710/45 R22.5 165D TL 4.00 7,780 (7,000) 1,210 728 24.00 x 22.5 10 Cargo X BIBLELY TIGO ST ClassicST S S(D)ProfiR(D)50 R(D) Profi60 R(D) Profi70 R(D) Profi60 R(D) Combi70 R Combi70 RD Combi60 T 70 T 11.5/80-15.3 Imp 10 PR S X X – – – – – – – – – –15.0/55-17 Imp 10 PR O S S – – – – – – – – – –19.0/45-17 Imp 10 PR O O O – – – – – – – – – –500/50-17 Imp 10 PR X X O S S – – – – – – – –505/50-17 MPT 12 PR X X O O O – – – – – – – –500/55-20 12 PR – – – O O – – – – – – – –500/45-22.5 16 PR – – – O O – – – – – – – –550/60-22.5 – – – – X S S S S X X S X560/45 R22.5 – – – O O X X X X X X X X600/55-22.5 – – – – X O O O X X X O O620/40 R22.5 – – – O O X X X X X X X X650/50 R22.5 – – – – – O O O X X X O O710/35 R22.5 – – – O O X X X X X X X X710/45-22.5 – – – – – O O O O X O O O710/40 R22.5 – – – – – O O O O X X O O710/50 R26.5 – – – – – X X O O S S O S800/45 R26.5 – – – – – X X O O O O O O560/60 R22.5 161D TL – – – – – O O O X X X O O600/50 R22.5 159D TL – – – – – O O O X X X O O710/45 R22.5 165D TL – – – – – O O O O X X O OLive Life Lelywww.lely.comLely, Astronaut, Astri, Atlantis, Attis, AWS, C4C, Calm, Caltive, Commodus, Compedes, Cosmix, Discovery, F4C, Fertiliner, Gravitor, Grazeway, Hibiscus, Hubble, Juno, L4C, Lely Center, Lelywash, Lotus, Luna, Nautilus, Orbiter, Quaress, Qwes, SAE, Shuttle, Splendimo, Storm, T4C, Tigo, Viseo, Vector, Voyager, Walkway and Welger are registered trademarks of the Lely Group. The right of exclusive use belongs to the companies of the Lely Group. All rights reserved. The information given in this publication is provided for information purposes only and does not constitute an offer for sale. Certain products may not be available in individual countries and products supplied may differ from those illustrated. No part of this publication may be copied or published by means of printing, photocopying, microfi lm or any other process whatsoever without prior permission in writing by Lely Holding S.à r.l. Although the contents of this publication have been compiled with the greatest possible care, Lely cannot accept liability for any damage that might arise from errors or omissions in this publication.Lely has a long and deep history of recognizing the needs of modern farmers. Our products are developed with the cow as starting point. We strive to let her excel and as such, we supply products to farmers and contractors ranging from forage harvesting, to feeding, housing, caring, milking and energy sourcing. In addition we boast specifi c knowledge and experience in facilitating farmers to get the best out of their equipment. As such our in-depth knowledge of the complete farm cycle – from grass to glass – is unrivalled in the agricultural business.We are committed to a sustainable, pro? table and enjoyable future in farming.Passionate about farmingYour Lely distributorLely really cares for the environment.49Cargo X BIBLHQ.B05013.EN.ALive Life Lelywww.lely.comLely, Astronaut, Astri, Atlantis, Attis, AWS, C4C, Calm, Caltive, Commodus, Compedes, Cosmix, Discovery, F4C, Fertiliner, Gravitor, Grazeway, Hibiscus, Hubble, Juno, L4C, Lely Center, Lelywash, Lotus, Luna, Nautilus, Orbiter, Quaress, Qwes, SAE, Shuttle, Splendimo, Storm, T4C, Tigo, Viseo, Vector, Voyager, Walkway and Welger are registered trademarks of the Lely Group. The right of exclusive use belongs to the companies of the Lely Group. All rights reserved. The information given in this publication is provided for information purposes only and does not constitute an offer for sale. Certain products may not be available in individual countries and products supplied may differ from those illustrated. No part of this publication may be copied or published by means of printing, photocopying, microfi lm or any other process whatsoever without prior permission in writing by Lely Holding S.à r.l. Although the contents of this publication have been compiled with the greatest possible care, Lely cannot accept liability for any damage that might arise from errors or omissions in this publication.Lely has a long and deep history of recognizing the needs of modern farmers. Our products are developed with the cow as starting point. We strive to let her excel and as such, we supply products to farmers and contractors ranging from forage harvesting, to feeding, housing, caring, milking and energy sourcing. In addition we boast specifi c knowledge and experience in facilitating farmers to get the best out of their equipment. As such our in-depth knowledge of the complete farm cycle – from grass to glass – is unrivalled in the agricultural business.We are committed to a sustainable, pro? table and enjoyable future in farming.Passionate about farmingYour Lely distributorLely really cares for the environment.