Log Max - 7000C - Harvesting Head Brochure

6000BHEADS ABOVE THE COMPETITIONwww.logmax.com6000B1 2 30 5 10 15 20 25 30 35 40 45 inTJ-2011-05-001 - Specifications may vary depending on equipment selected .We reserve the right to make changes in product specifications without prior notice.Feed roller optionsSteel, V-Steel, EucalyptusOptional equipmentAccumulation Kit, Auto Chain Tensioner,Eucalyptus equipment, Fixed protection plate,Field repair kit, Color marking, Hose Holder, Hydraulic upper knife, Rotator control, Find end sensor, Snow coverHARD-WEARING DESIGNBASED ON DECADES OF IMPROVEMENTSLog Max AB - Stationsvägen 12 - 770 13 Grangärde - Sweden / Tel: +46 240 59 11 00 Fax: +46 240 59 11 10 - www.logmax.com*This value is measured according to EN ISO 3744:2009 with an accuracy of ±2 dB (A) under publication EA-4/16:2003. The value is measured when the saw cuts with maximum speed without any load.Most productive range 1. Min delimbing diameter2. Max cutting diameter, std3. Max cutting diameter, optDIMENSIONS METRIC IMPERIALHeight 1 682 mm 66.2’’ Weight (incl. feed rollers and damped protection plate) 1 299 kg 2,864 lbsSound effect* 110 dB 110 dBFEEDINGTwo hydraulically driven rollers mounted on radial piston motors 857cc or 934 cc. 52.3 cu.in or 56.7 cu.inFeed force std/opt 26,9 kN/29,3 kN 6,047/6,857 lbfFeed speed std/opt 4,2/3,9 m/sec 13.8/12.8 fpsMaximum roller opening 625 mm 24.6’’CUTTING / DELIMBINGBar lenght / Maximum cut capacity up to 82 cm / cut up to 72 cm up to 32.3’’ / cut up to 28.3’’ Maximum full coverage delimbing diameter 500 mm 19.7’’ Minimum hydraulics requirements for acceptable performance 200 l/min 52.8 gpmCONTROL SYSTEM MAXI / DASA4 / MOTOMIT / TM300 / Log Mate 402 / CabsWin21-25 t. 18-22 t. 170-210 kNmLog Max 6000 is a light-weight head suitable for final felling. Combining low weight with high power it is especially designed for large wheeled carriers.Log Max 6000B is built on well-proven hydraulics with a maximum hydraulic pressure of 260 bar (3 771 psi) and max flow of 280 l/min (74 gpm).The feed rollers always work perpendicular to the tree which has for benefit to minimize friction losses and roller penetration. This geometry also ensures accurate length measuring for high quality timber.