Martatch - Loader Attachments Brochure

1-800-698-5510www.martatch.comLOADER ATTACHMENTSSKIDSTEER ATTACHMENTSSNOW BLADESCUSTOM MADE ATTACHMENTS TO fIT ANy LOADER OR SKID STEERPRODUCT INDEXATTACHMENTS PageBuckets 2-3Bale Spears 4Manure Forks 5Stone Forks 5Grapples 6-7Pallet Forks 8-9Logging Equipment 10-11 Lift Boom 11Rotary Cutter 11 Gardening 12Industrial 13 SNOWBLADESSnowblades 14-18 1-800-698-5510 1CUsTOm maDE aTTaChmENTs TO fIT aNy lOaDER OR skID sTEER.FEATURES• ¼” material used for body• hardened side cutting edge for longer wear life• ¾” x 6” hardened cutting edge• trailer hitch for front towing available• will custom fabricate to any size or specifications• skidsteer bucket shownskIDsTEER / lOaDER BUCkETMARTATCH buckets, and all other attachments, are built with the end user in mind. With our roots as farmers, we know the abuse, and wear and tear, that attachments need to go through to get the job done. Each attachment is reinforced and gussetted to make it strong and durable for years after purchase.Attachments are stocked for fast turn arounds but custom pieces are built constantly as well. Give us a call at 1-800-698-5510 for your needs today.BUCKETS1-800-698-5510www.martatch.com2PRODUCTFEATURES• Increases height of dump• piles manure higher in your storagehIgh DUmP BUCkETskIDsTEER / lOaDER BUCkETsFEATURES• ¼” material used for body• inside gussets for more strength• hardened side cutting edge for longer wear life• ¾” x 6” hardened cutting edge• trailer hitch for front towing available• will custom fabricate to any size or specifications• (loader bucket shown)lOaDER, hEavy DUTy, hIgh vOlUmE, BUCkETBUCKETS1-800-698-5510 3GUIDElOaDER BUCkET wITh TOP gUaRD FEATURES• ¼” material used for body• inside gussets for more strength• hardened side cutting edge for longer wear life• ¾” x 6” hardened cutting edge• top guard for bigger loads• trailer hitch for front towing available• will custom fabricate to any size or specificationsFEATURES• extreme duty teeth • hardened side wear plates• pointed side for better penetrationhEavy DUTy TOOTh BUCkETFEATURES• bucket floors are constructed with AR400 Steel• extra heavy duty construction for high capacity work loads• OPTIONAL: grill to prevent overflowTElEhaNDlER & whEEl lOaDER BUCkETStandardHigh VolumeHitchChain Hookis inside bucket to prevent chain snap-ping at operatorSkidsteerBucketStepsIce Scraper AttachmentThe ice scraper easily attaches and detaches with a single hitch pinFEATURES• standard 3-point hitch mounts • 46” wide frames (30” tine spacing)• available with any amount of tines to suit your needs• 32”, 39”, and 49” spear lengthsCOmPaCT UTIlITy BalE sPEaR3-POINT hITCh BalE sPEaRBALE SPEARSFEATURES• top safety frames are removable for higher stacking capabilites under truss and low buildings• safety frames easily remove without tools• available in 26” and 36” high• see through backplate for better visibility at truck level• 32”, 39”, and 49” spear lengths• 46” wide frames (30” tine spacing)• available with any amount of tines to suit your needssafETy fRamE BalE sPEaR1-800-698-5510www.martatch.com4PRODUCTlaRgE, hEavy DUTy, BalE sPEaRwith hydraulic Bale release PusherFEATURES• safety frames can be easily removed • light duty bale spears • economical pricing • 20-40 hp tractors and skid steers • light weight to maximize the lifting capacity of the machineFEATURES• designed to carry 3 or 4 large square bales• hydraulic pusher to release bales from tines• top frame can be removed for handling bales in low buildings• safety support to prevent bale fork from tipping when not in use. Folds up when not in use.• 25” tine spacing• 60” W x 54” H main frame dimensions• 60” W x 79” H total frame with extension• hydraulic hoses included• quick couplers sold separatelySafety Stand Vertical ExtensionNo Hydraulic OptionFEATURES• 36” Conus I cranked tines at 8” centers• 31” useable length• from 42” to 108” widths• available in skidsteer and loader profiles• optional: 32” cranked tines with 26” useable length• original kverneland tinesmaNURE fORkFEATURES• an economical choice with 2 tools in one attachment• pallet fork tines easily remove without tools• bale spear tines easily remove without tools• safety frames easily remove without tools• 48” bale spear tines• 42” and 48” pallet fork tines• pallet fork tines adjustable for width• standard class II forklift forksEasy removal of safety frames. No tools neededForks, tines and safety frames are easily removed without tools. hEavy DUTy PallET fORk BalE sPEaR COmBOMANURE / STONE FORKS1-800-698-5510 5REgUlaR sTylE sTONE fORkFEATURES• 39” Conus II cranked tines at 4” centers• 32” useable length• available from 54” to 108” widths• see through back for better visibility• original kverneland tines• performs well in loose ground or pasture landFEATURES• 40” useable length tines at 3” centers• plasma cut for strength and durability• points are reinforced with cross bar• performs well in loose ground• available from 54” to 108”RETaINER sTylE sTONE fORkGUIDEFEATURES• handles it all: gravel, logs, garbage, large bales, manure, brush, cement - the list is endless• 2 hydraulic grabbers work independently to hold uneven loads• hardened cutting edge• an all purpose tool, to turn your skidsteer into a multi-purpose machine without changing bits• available from 48” to 96”FEATURES• opens to 72” - handy for large bails • able to grab and move almost anything you can think of• extra heavy duty construction with AR400 materal• Handles the most rugged jobsBUCkET gRaPPlETElEhaNDlER & whEEl lOaDER gRaPPlEFeatures• available from 60” to 108”• useful for stones and heavy debris etc.• can be fitted on any front end loader or skidsteer• 39” conus II cranked tines 34” useable length at 4” centers• original kverneland tinessTONE fORk gRaPPlEmaNURE / UTIlITy gRaPPlEFEATURES• available from 60” to 108”• useful for large bales, manure, debris, logs, stones etc.• can be fitted on any front end loader or skidsteer• 36” conus I cranked tines 31” useable length at 8” centersOptiOnal: 32” cranked tines, 26” useable at 8” centers• original kverneland tinesHandling odd materials throws a challenging curve ball every time. With Martatch’s grapple buckets and forks you won’t be stumped when the worst comes along. From inside the cab you can scoop, dig, and grab materials such as large rocks, branches, debris etc. and move them to a different location within minutes. Neglected cleanup jobs will disappear in front of you while you operate a grapple without ever getting out of your seatGRAPPLES1-800-698-5510www.martatch.com6PRODUCTGRAPPLESPallET fORk gRaPPlEFEATURES• excellent for logging and fence posts• available with adjustable forks 42” to 60” long• 7500 lbs. lifting capacity• hydraulic clamping arms clamp independently to clamp uneven loads• can be used for lifting skidsOptiOnal: fence unroller will adapt to the side of the grapple pallet forksDEBRIs gRaPPlE 37”DEBRIs gRaPPlE 27”ROOT RakE gRaPPlEFEATURES• shown is 37” tines• 69” to 106” widths• 5½” opening between tines• 48” grapple opening• heavy duty ¾” plasma cut material• available in single or double grapple• hoses included• 27” tines grapple availableFEATURES• 27” tines• 69” to 106” widths• 5½” opening between tines• 39” grapple opening• heavy duty ¾” plasma cut material• available in single or double grapple• hoses includedFEATURES• 48” to 80” widths• plasma cut ½” AR400 high tensile teeth• teeth spaced at 8” centers• available in 30” height, single grapple• available in 36” height, double grapple• hoses includedPallET fORk - sINglE aRm gRaPPlEFEATURES• excellent for laying landscape stones• 7500 lbs. lifting capacity• can be used for lifting skids1-800-698-5510 7GUIDEPALLET FORKSPallet forks can make handling your skidded materials much easier and safer. Martatch offers you different options when you need to buy a pallet fork. This way you can get the perfect match to your loader or skidsteer, and the application, for the best cost. Contact us for more information on our pallet forks. Don’t settle for lesshEavy DUTy PallET fORk / BalE sPEaR COmBO1-800-698-5510www.martatch.com8PRODUCTFEATURES• an economical choice with 2 tools in one attachment• pallet fork, bale spear tines and safety frames easily remove without tools• 48” bale spear tines• 42” and 48” pallet fork tines• pallet fork tines adjustable for width• standard class II forklift forksPALLET FORKShEavy DUTy fORkREgUlaR DUTy PallET fORklIghT DUTy PallET fORkFEATURES• 3700 lbs. capacity - 50” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of pallet insertion at truck level• anti-slip step• 1¼” thick x 4” wide forksFEATURES• 5500 lbs. capacity - 50” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of pallet insertion at truck level• anti-slip step• 1½” thick x 4” wide forksFEATURES• 7500 lbs. capacity - 46” frame• tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks• see through back plate for ease of pallet insertion at truck level• anti-slip step• 1¾” thick x 4” wide forksFEATURES• standard 3-point hitch mounts • tines adjustable for width• 36” , 42”, and 48” fork lengths• standard class II forklift forks3-POINT hITCh PallET fORkPallet Fork extensionsavailable from 54” to 96”PallET fORk EXTENsIONs1-800-698-5510 9GUIDElOg gRaPPlEFEATURES• 40 - 80 hp and 80 - 100 hp models available• grabs up to 30” logs• chain swivel• clamps on the main frame to keep grapple from swinging when driving over rough terrrain• extra heavy duty construction• front jaws to grab hanging trees to back drag• grabs logs on one end for easy piling (shown above)OptiOnal:• hydraulic winch with 165’ 3/8” cable• 8000 lb. pulling capacity at 25 gal/min and 2700 lb. pressure• 15 metres/min line speed• free spoolingLOGGING EqUIPMENThyDRaUlIC wINChFEATURES• will handle any job from logging to dead stock removal• hydraulic 8000 lbs. free spooling winch.• 165’ by 3/8” logging cable at 15 metres/min line speed• 25 gal/min/2700 lbs. hydraulic pressure• self anchoring plate• brush removal blade1-800-698-5510www.martatch.com10PRODUCTmaRTaTCh PRODUCTs aRE BUIlT TO lasTLOGGING EqUIPMENTROTaRy CUTTERlIfT BOOmFEATURES• adjustable boom length• pintle hook on end• adjustable from 48” to 78”• extended capacity 1500 lbs.1-800-698-5510 11FEATURES• available in 60”, 72” and 84” for 30 to 100 hp• high flow not needed• lateral float & side shift• adjustable side slides• hardened cutting blades• hydraulic motor 30 hp @ 20 gal/min with 40 hp gearbox• can be fitted on any front end loader or skidsteer• easily adjusts without tools for cutting along ditches, fences etc.• safety chain guardOptiOnal: available with front casterGUIDEflaIl mOwER• available in 60”- 96” widths • high flow not needed • vertical float • hydraulic motor 30 hp - approx. 17–25 gallons / minute • adjustable side sliderslOaDER mOUNT sPRayERFEATURES• Front mount or 3 pt hitch• 10’ fold away booms• Hand gun sprayer• 15 - 60 gallon tanks available• Fold away booms up to 30’ availablefERTIlIzER sPREaDERhyDRaUlIC aRm ROTaRy CUTTERROTOTIllERFEATURES• spreads fertilizer, salt, sand and seed• front mount or 3 pt hitch mount• hydraulic or PTO driven• available from 100 L to 500 L capacityFEATURES• designed for mowing on uneven terrain along roadsides and laneways, etc.• available from 54” - 66” wide• front castor is standard to ensure even travel on uneven terrainFEATURES• front mount or 3 pt hitch• hydraulic or PTO driven• 40” to 90” wide availableLANDSCAPING1-800-698-5510www.martatch.com12PRODUCTTRaIlER hITCh aDaPTERROTaTINg hyDRaUlIC BROOmhyDRaUlIC aNglE BROOmFEATURES• excellent for snow cleanup, sweeping feed alley ways, outside yards• does an excellent job without creating dust• hydraulic adjustable angleFEATURES• trailer hitch adapter for front end skid steer or loader• move ball hitch trailers easily with your front end loader or skid steer• 4 way variable size ball or hook hitchFEATURES• Angles both ways (manually with pin)• Sweeps forward or reverse into bucket• Dump swept-up debris by tripping bucket manually• After dumping, bucket will latch into place when sitting on floor• Uses hydraulic motor to spin broom3 PT hITCh aDaPTERFEATURES• Hookup to any 3 pt hitch equipment with skidsteer or tractorLANDSCAPING1-800-698-5510 13GUIDESnow removal with large tractors and blades is a growing market due to large parking lots needing to be cleared with minimal delay to businesses. Increase your efficiency and control with a Martatch hydraulic end wing blade, or one of our heavy duty snow pushers. Whatever the application, Martatch can suit you up with the best of both worlds. FEATURES:• spring trip cutting edge • lateral float• cross-over relief valve protection• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear lifeAVAILABLE IN:• 24” high - 60” - 96” wide - 30-50 hp• 30” high - 72” - 108” wide - 30-80 hp• 34” high - 108” - 168” wide c/w double cylinder - 60-120 hp• 42” high - 144” - 192” wide c/w double cylinder - 90-200 hp extra heavy duty constructionhEavy DUTy hyDRaUlIC aNglE sNOw BlaDEsSNOw BLADES1-800-698-5510www.martatch.com14PRODUCTFEATURES:• spring trip mouldboard • lateral float• cross-over relief valve protection• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear life AVAILABLE IN:• 20” high mouldboard• from 54” to 72” widths• made to fit any loader• for 20 - 35 hp. range• available with undercarriage mountThe true name of Martatch’s compact tractor snowblades is - convenience. Now you don’t have to spend your whole morning shoveling your driveway only to have it snow again later that day. With a Martatch snow blade on the front of your compact, you can have your’s, and the neighbour’s driveway clean before your coffee is done. Look no furtherSNOw BLADES1-800-698-5510 15PURE CONVENIENCEhyDRaUlIC aNglE COmPaCT sNOw BlaDEsGUIDEMartatch Snow-pushers are strictly designed for the contractor / farmer that needs the best solution for a bare-bones price. Snow-pushers are built with loader attachments specifically to your request or with a bucket attachment. You can convert your loader tractor or wheel loader to a snow removal machine in minutes for a low cost. Most buckets will simply slide into the sleeves at the back of the snow pushers while chains securely hold the pusher onto your bucket. This is definitely your best bet for a simple conversion where versatility is important.FEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral floatAVAILABLE IN:• 30” high - 96” wide - 30-50 hp• 34” high - 120” wide - 40-90 hp• 38” high - 168” wide - 80-120 hp• made to fit any loader or bucketREgUlaR DUTy sNOw PUshERsSNOw PUShERS1-800-698-5510www.martatch.com16PRODUCTFEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral floatAVAILABLE IN:• 42” high - 144” - 192” wide - 110-150 hp• 48” high - 144” - 192” wide - 150-200 hp• extra heavy duty construction designed for 150-200 hp wheel loaders• made to fit any loader or bucketCONvERT yOUR lOaDER TRaCTOR OR whEEl lOaDER TO a sNOw REmOval maChINE IN mINUTEsSNOw PUShERShEavy DUTy sNOw PUshERs1-800-698-5510 17GUIDESNOw BLADESsUPER hEavy DUTy sNOw-PUshERs1-800-698-5510www.martatch.com18The Martatch SNOW BRUTE snow pusher is a beefed up version of the Heavy Duty Snow Pusher for 150 - 200 HP machines. Built with heavier material and more strength, this is one serious contender in the snow pusher market. One seriously heavy duty snow pusher for serious snow pushers.FEATURES:• AR 400 material - replaceable skid shoes• adjustable skid shoes• spring trip cutting edgeOptiOnal: spring trip end plates• lateral floatAVAILABLE IN:• 42” high - 144” - 192” wide - 110-150 hp• 48” high - 144” - 192” wide - 150-200 hp• extra heavy duty construction designed for 150-200 hp wheel loaders• made to fit any loader or bucketPRODUCTSNOw BLADESFEATURES:• blade wings hydraulically extend from 0-180 degrees• spring trip cutting edge • lateral float• cross-over relief valve protection on all 4 cylinders• hydraulic angle 30 degrees both ways• adjustable skid shoes• reversible cutting edge for longer wear life• round pipe bullnose edge on wings to protect tiresAVAILABLE IN:• 30” high - 72” - 105” wide - 55-85 hp• 34” high - 96” - 168” wide - 80-155 hp• wings are 30” deep• extended wings add a maximum of 60” to main mouldboard widthhyDRaUlIC END wINg sNOw BlaDEs1-800-698-5510 19Martatch Hydraulic End Wing Snowblades give you a significant edge over any other conventional blade. From the cab you can windrow the snow, then with the touch of a button you can setup your blade as a box blade to push it to the far end of the lot. Even tight corners aren’t an issue with this capable blade. Just swing the wings back and back-dragging becomes easy and efficient. When hard-to-get-at spots are all over your lot, don’t settle for anything less. whEN haRD-TO-gET-aT sPOTs aRE all OvER yOUR lOT, DON’T sETTlE fOR aNyThINg lEssGUIDE1-800-698-551020TAKE A BITE OUT OF OLD MAN wINTER NEW STYLE SNOW PUSHER WITH BACK DRAGAVAILABLE IN:30” high, 120” wide (30-50 hp) 34” high, 144” wide (40-90 hp)38” high, 168” wide (70-120 hp) FEATURES:• Available with Steel or Rubber cutting edge for back drag• A must have for putlling snow away from doors, buildings or loading docks• Spring trip cutting edge • AR400 Adjustable shoes1-800-698-5510Custom made attaChments to fit any loader or skid steer.Buckets - Page 3 Angle Broom - Page 13Bale Spears - Page 4Hydraulic Winch - Page 11Stone Forks - Page 6Snow Blade - Page 14Snow Pusher - Page 16Palette Forks - Page 94350 Hessen Strasse, RR #3,Wellesley, ON N0B 2T0 CanadaPhone: 519-699-4668 Fax: 519-699-54161-800-698-5510Email: sales@martatch.com Website: www.martatch.comLOADER ATTACHMENTSSKIDSTEER ATTACHMENTSSNOW BLADESAvailable At: