Model GF-Series - Rotary Hiller - Brochure

GF-series Rotary HillerRotary Hiller for 2-, 4- and 6-rows for large volume,clod-free and stable ridgesWe reserve the right of alterations. L04.0901.EN 04/09/2000462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 3Robust and high performance:the GF-series Rotary HillerAt its best – row after rowEfficient and consistent: These rotary hiller can handle the heaviest soil. With their additional ridge buildup, they ensure the quality until harvest time.Intelligent and precise: The tines crumble the soil intensively, left and right of the ridges. The loosenedsoil is used for the solid large-volume ridge buildup.Accurate and stable: The GF-series Rotary Hiller create even and high-volume ridges.The expectations of cultivators are veryhigh, as their intensive soil cultivationrequires consistency and reliability. At the same time, they are expected to work smoothly and cultivate large areas. The GF-series Rotary Hiller offer you these benefits. They intensivelycultivate the soil while destroying annoying clods. The soil thus becomesloose and can be used for ridge formingand makes up the basis for a harvestwith a higher yield. Furthermore, theserotary hiller can be converted to full width cultivators with a few manualactions prior to planting.GF-SER IES462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 4Powerful features to the last detailand for all performance levelsGF-SER IESHigher durability: In addition tothe standard support wheels (5),twin support wheels (6) or wide support wheels (7) provideeven more load capacity for allrotary hiller.Standard tines Trapeze with speed plate (option)Bulbous VA with speedplate (option)Bulbous VA (option) Bulbous (series)Low wear and tear on any soilBasic cultivating tines: are coated with additionalwear and tear protectionWidia cultivating tines:as hard as a diamond due to soldering under vacuum pressureSpecial cultivating tines:with resistant hard metal,specifically for stony soilsBSW1 25 763 4Perfect condition: The shapingboard, suspended from swingframes behind the covering bodyassembly, allows large-volumeridges. The necessary pressureis reached via spring-loadedpress stays. Different shapers orspeed plates achieve the desiredridge shapes and surfaces.Durable and strong: The powertransfer of the Grimme Rotary Hiller takes place via a durablespur gear drive (1).The option of the two-sided drive (2) is ideal forcontinuouslydifficult conditions.Stone tines (option)NEW462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 1Grimme Rotary Hiller as per your specifications: All machines are available for row widths of 75–90 cm or 30–36 inch. The illustrations show a 2-row hiller for75 cm (1) or 90 cm (2) widths.Rotary Hiller for 2-, 4- and 6-rows: the matching series for every typeGF 75 - 2 , GF 90 - 2 , GF 7 5 - 4 , GF 90 - 4 , GF 75 - 6 , GF 90 -6 , GF 75 -8Attractive shape and stable: The GF 75-4 forms exact ridgesas per your specifications. Whether you decide on the standard bulbous ridge shape (3)or the optional trapeze-formedridge shape (4).Safely through traffic: With highworking widths, the options forend-row kit (7) come in handy for safe road transport.1 23 45 6Stable operation: The two additional front wheels (5) giveyour 6-row hiller even more stability. The two-sided drive ofthe machine (6) runs in series7462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 5Successful options for difficult conditionsOPT IONExactly in the spot for higheryields: With the optional sliding control (1) the feed is always centered in the ridge, thus reducing the risk of green potatoes. Optional rear support wheels (2) improve the exact depth guidance of the cultivator.1 235Dämme harmonischverlängern44Comfortable row travel: Mechanically lowerable sprayingtrack clearing units (3) (option)level the ridges. Our tip for vegetable experts,who grow carrots in ridges: the hydraulically driven ridgepressure roller behind the cultivator (4) (option)Use the rotary hiller as a full field cultivator: With a few manual actions, the Grimme Rotary Hiller becomes suitable for classic soil cultivation (5).Optional duck foot shares (6) ensure planting into deeply loosened soil. This technique leads to great quality and yields.An optional clamp for full widthoperations (7) can be installedwith a few manual actions.67462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 6Grimme Landmaschinenfabrik GmbH & Co. KG · Hunteburger Straße 32 · D-49401 DammePhone +49 5491 666-0 · Fax +49 5491 666-298grimme@grimme.de · www.grimme.com Your Grimme Partner for advice and service: Use the rotary hiller as a full width rotary hiller: With a few manual actions, the Grimme Rotary Hiller becomes suitable for classic soilcultivation, also in combination with theGL 34 T, a 4-row planter.1,550 mm1,850 mm800 kg275 cm32 pieces16 piecesFrom 40 kW150 HP––320Upon requestUpon requestWorking widthTransportation widthWeightNumber of rowsRow spacingNumber of tines (50x12 mm)Tines for stony soils (option)(60x12 mm)Tractor performanceAngle gear with rigid neckReinforced gear for one-sided or two-sided drive (option)Change gearRotor speed of tractor1,000 r.p.m.540 r.p.m.750 r.p.m.GF75-23,050 mm3,300 mm1,400 kg475 cm64 pieces32 piecesFrom 70 kW 150 HP 230 HPOption300, 320, 332*Upon requestUpon requestGF75-44,505 mm–Approximately2,500 kg675 cm92 pieces46 piecesFrom 130 kW–300 HPSeries: bothsides–340––GF75-6––Approximately2,500 kg875 cm124 pieces62 piecesFrom 130 kW–300 HP–340––GF75-81,850 mm2,150 mm900 kg 290 cm44 pieces22 pieces50 kW150 HP––320Upon requestUpon requestGF90-23,650 mm3,900 mm1,600 kg 490 cm84 pieces42 piecesFrom 70 kW150 HP230 HPOption300, 320, 332*Upon requestUpon request––Approximately2,500 kg690 cm120 pieces60 piecesFrom 130 kW–300 HPSeries: bothsides–340––GF90-4GF90-6* Others as optionsWe reserve the right of alterations. L04.0901.EN 04/09/2000Technical data462-103-02-GF-Serie_engl_RZ_02 03.04.2009 14:51 Uhr Seite 2<< /ASCII85EncodePages false /AllowTransparency false /AutoPositionEPSFiles false /AutoRotatePages /None /Binding /Left /CalGrayProfile (Dot Gain 20%) /CalRGBProfile (sRGB IEC61966-2.1) /CalCMYKProfile (Euroscale Coated v2) /sRGBProfile (sRGB IEC61966-2.1) /CannotEmbedFontPolicy /Error /CompatibilityLevel 1.3 /CompressObjects /Off /CompressPages true /ConvertImagesToIndexed true /PassThroughJPEGImages true /CreateJDFFile false /CreateJobTicket false /DefaultRenderingIntent /Default /DetectBlends true /DetectCurves 0.0000 /ColorConversionStrategy /LeaveColorUnchanged /DoThumbnails false /EmbedAllFonts true /EmbedOpenType false /ParseICCProfilesInComments true /EmbedJobOptions true /DSCReportingLevel 0 /EmitDSCWarnings false /EndPage -1 /ImageMemory 1048576 /LockDistillerParams true /MaxSubsetPct 100 /Optimize true /OPM 1 /ParseDSCComments true /ParseDSCCommentsForDocInfo true /PreserveCopyPage true /PreserveDICMYKValues true /PreserveEPSInfo true /PreserveFlatness true /PreserveHalftoneInfo false /PreserveOPIComments false /PreserveOverprintSettings true /StartPage 1 /SubsetFonts true /TransferFunctionInfo /Apply /UCRandBGInfo /Remove /UsePrologue false /ColorSettingsFile (None) /AlwaysEmbed [ true ] /NeverEmbed [ true ] /AntiAliasColorImages false /CropColorImages true /ColorImageMinResolution 300 /ColorImageMinResolutionPolicy /OK /DownsampleColorImages true /ColorImageDownsampleType /Bicubic /ColorImageResolution 300 /ColorImageDepth -1 /ColorImageMinDownsampleDepth 1 /ColorImageDownsampleThreshold 1.50000 /EncodeColorImages true /ColorImageFilter /DCTEncode /AutoFilterColorImages false /ColorImageAutoFilterStrategy /JPEG /ColorACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /ColorImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /JPEG2000ColorACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /JPEG2000ColorImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /GrayImageDict << /QFactor 0.15 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >> /JPEG2000GrayACSImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /JPEG2000GrayImageDict << /TileWidth 256 /TileHeight 256 /Quality 30 >> /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict << /K -1 >> /AllowPSXObjects false /CheckCompliance [ /PDFX3:2002 ] /PDFX1aCheck false /PDFX3Check true /PDFXCompliantPDFOnly true /PDFXNoTrimBoxError false /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (ISO Coated v2 \\050ECI\\051) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False /Description << /CHS /CHT /DAN /ESP /FRA /ITA (Utilizzare queste impostazioni per creare documenti Adobe PDF che devono essere conformi o verificati in base a PDF/X-3:2002, uno standard ISO per lo scambio di contenuto grafico. Per ulteriori informazioni sulla creazione di documenti PDF compatibili con PDF/X-3, consultare la Guida dell'utente di Acrobat. I documenti PDF creati possono essere aperti con Acrobat e Adobe Reader 4.0 e versioni successive.) /JPN /KOR /NLD (Gebruik deze instellingen om Adobe PDF-documenten te maken die moeten worden gecontroleerd of moeten voldoen aan PDF/X-3:2002, een ISO-standaard voor het uitwisselen van grafische gegevens. Raadpleeg de gebruikershandleiding van Acrobat voor meer informatie over het maken van PDF-documenten die compatibel zijn met PDF/X-3. De gemaakte PDF-documenten kunnen worden geopend met Acrobat en Adobe Reader 4.0 en hoger.) /NOR /PTB /SUO /SVE /ENU (Use these settings to create Adobe PDF documents that are to be checked or must conform to PDF/X-3:2002, an ISO standard for graphic content exchange. For more information on creating PDF/X-3 compliant PDF documents, please refer to the Acrobat User Guide. Created PDF documents can be opened with Acrobat and Adobe Reader 4.0 and later.) /DEU >> /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ << /AsReaderSpreads false /CropImagesToFrames true /ErrorControl /WarnAndContinue /FlattenerIgnoreSpreadOverrides false /IncludeGuidesGrids false /IncludeNonPrinting false /IncludeSlug false /Namespace [ (Adobe) (InDesign) (4.0) ] /OmitPlacedBitmaps false /OmitPlacedEPS false /OmitPlacedPDF false /SimulateOverprint /Legacy >> << /AddBleedMarks false /AddColorBars false /AddCropMarks false /AddPageInfo false /AddRegMarks false /ConvertColors /NoConversion /DestinationProfileName () /DestinationProfileSelector /NA /Downsample16BitImages true /FlattenerPreset << /PresetSelector /HighResolution >> /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /UseDocumentProfile /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams<< /HWResolution [2400 2400] /PageSize [612.000 792.000]>> setpagedevice