Model RG13 Series II - Handlebar Stump Cutters Brochure

SPECIFICATIONSRG13-II RG13 RG25HDGENERAL US Metric US Metric US MetricWeight 262 lb 119 kg 420 lb 191 kg 583 lb 264 kgLength 79.75” 202.6 cm 66”-90” 168 cm - 229 cm74”-98” 187.8 cm - 248.8 cmHeight 50” 127 cm 32-59” 81 cm - 150 cm34”-58” 81 cm - 150 cmWidth 25” 63.5 cm 31” 79 cm 29” 74 cmFrame Construction 7 gauge steel 7 gauge steel 7 gauge steelTires 4.10-6 4.8 x 8 6 x 12 tractor lugOperator Control Console Mounted on handlebar Mounted on handlebar Mounted on handlebarOptions Optional hour meterSelf-Propelled System N/A N/A Hydrostatic, forward/reverse/neural variable speed differentialENGINEModel 13 hp Honda GX390 9.75 kW 13 hp Honda GX390 9.75 kW 25 hp Kohler Command CH25 18.6 kWMain Bearings 2 2 2Number of Cylinders 1 1 V-TwinStarting Recoil Electric ElectricMaximum No Load RPM 3600 3600 3600Gross HP at Maximum No Load RPM 13 hp 13 hp 25 hp 18.6 kWMaximum Rated Torque 20.5 ft-lb @2500 RPM 20.5 ft-lb @2500 RPM 32 ft-lb @2500 RPMCooling Medium Air Air AirOil Filter Spin-on type Spin-on type Sping-on typeFuel Tank Capacity 1.72 gal 6.5 L 1.72 gal 6.5 L 3 gal 11 LCUTTING WHEELWheel Diameter 11” 28 cm 14” 35.5 cm 14” 35.5 cmWheel Thickness 3/8” 1 cm 3/8” 1 cm 3/8” 1 cmCutting Wheel Bearings 1” pillow block type 1 3/16” pillow block type 1 3/16” pillow block typeDrive Belt: 2-section banded V-belt 4-section banded V-belt (2) Notched V-beltCutting Teeth Rayco Super tooth™ forged, one-piece, with tungsten carbide tips.Rayco Super tooth™ forged, one-piece, with tungsten carbide tips.Rayco Super tooth™ forged, one-piece, with tungsten carbide tips.Cutter Teeth Quantity 8 12 12Belt & Chain Guard Steel, fully enclosedSteel, fully enclosedSteel, fully enclosedChip Retaining Curtains Fabric impregnated rubber Fabric impregnated rubber Fabric impregnated rubberCutter Wheel Engagement Centrifugal Clutch Direct drive Electromagnetic ClutchCUTTING RANGE WITHOUT REPOSITION-INGBelow Ground Level 13” 33 cm 18” 45.7 cm 22” 55.8 cmAbove Ground Level 22” 56 cm 20” 50.8 cm 24” 60.9 cmMini Work-Force Spec Sheet 09-01-13 l RAYCO Manufacturing, Inc., Wooster, OH 44691 l Made and Printed in the USA l Copyright © 2013RAYCO Manufacturing Inc. retains the right to make changes in design and specifications; engineering; add or remove features; add improvements; or discontinue manufacturing at any time without notice or obligation.MINI WORK-FORCE STUMP CUTTERS1