Multi Storey Tents Brochure

Veldeman Structure Solutions Industrieterrein Vostert 1220 3960 Bree (Belgium)Tel.: +32 (0)89 47 31 31 Fax: +32 (0)89 47 37 77 E-mail: info@veldemangroup.be Website: www.veldemangroup.be11,3mAlu 10mprof. 15,8 x 10cmAlu 15mprof. 24 x 10cmAlu 20mprof. 24 x 10cmAlu 25mprof. 27 x 10cmAlu 30mprof. 27 x 10cm10,49m9,69m8,88m8,05m6,38m3,50mAlu 10mprof. 15,8 x 10cmAlu 15mprof. 24 x 10cmAlu 20mprof. 24 x 10cmAlu 25mprof. 27 x 10cm3m2,79m3,50m6,61m9,40m11,07m11,89m12,70m13,51m5m 5m 5m5m5m5m5mConstructionThe lower storey(s) are made from a steel construction on base-plates. The standard anchoring is realised with stakes. The top storey is made from a self-supporting anodised aluminium structure supported on steel galvanised base-plates. All parts are connected with pins for quick and easy installation. The stability is ensured using wind bracing. The structure is subject to the most important international building standards (e.g. the British “Building Codes”, the Germany “Prüfbuch” standard, the French “Extrait du registre de sécurité”, etc.).Roof and gable fabricsRoof and gable fabrics are made from PVC-coated polyester fabric (white translucent, white non-translucent or colour). Roof and gable fabrics are slid into the keder tracks of the roof beams and stretched with tension tubes and ratchets or fabric tensioners. Flame retardant according to the French standard M2, German standard DIN 4102 B1 and British Standard BS 5438. The fabric is UV-stabilised and treated against deterioration due to rot and mildew.SidewallsThe sidewall fabrics are made from PVC coated polyester fabric (white translucent, white non-translucent or colour). Flame retardant according to the French standard M2, German standard DIN 4102 B1 and British Standard BS 5438. The fabric is UV-stabilised and treated against deterioration due to rot and mildew. One sidewall of 5 m is made up of two sections of 2,5 m connected with a zip. The sidewall slides into the leg with a keder in the keder tracks. The side fabric is attached to the connection bar or ground beam at the bottom with straps and at the top the sidewall is slid into the side purlin with keder sections. This prevents the fabric from flapping in strong winds.Technical specificationsStandard width 10-30 m 10-25 mStandard length UnlimitedSide height 6,38 m 9,4 m Bay distance 5 mWIDTHLENGTHGround planCross section drawing