Products Catalog Brochure

ProductWhat's New 2Fits My Color 3Company Profile 4-5Performance guarantee 6Warranty 7speed-loctM adapters 8-13speed-loctM adapter replacement Parts 13replaceable tips - Category 1 16-17seeding single-shoot 18-25seeding Multi-shoot 26-53 Replaceable Tips - Advantage Series 27 C-Shank 28-37 Edge-On 38-47Specifically Designed Openers 48-59seed Boots 60-63Fertilizer Knives 64-69tillage, sweeps, spikes and Chisels 70-77-accessories 78-79reference 80-103Assemblies 80-93Replacement Weld-on Tips 94Product Depth Comparison Chart 95Speed-LocTM Reference Guide 96-97Bolt Length Chart 98-100Bolt and Nut Part #'s / Torque Specs 101Dealer List 102-103Contact us 104-inside Back CoverO F C o N t e N t s043-PWV-0800 76043-PWV-1000 76043-PWV-1200 76043-PWV-1400 76043-PWV-1600 76043-PWV-1800 76047-ACC-1001 79047-ACC-1002 79047-ASY-1000 18047-ASY-1000P 33047-KNH-1000 18047-PWV-0400 76047-PWV-0900 76047-PWV-1000 76047-PWV-1100 76047-PWV-1200 76047-PWV-1300 76047-VRT-1040 22050-KNH-0812 19050-KNH-0820 67050-PWV-0600 76050-PWV-0800 76050-PWV-1000 76050-PWV-1200 76050-PWV-1400 76050-PWV-1600 76050-PWV-1800 76070-RCH-0451 77070-RCH-0452 77070-RSP-0200A 77070-RSP-0210A 77070-RSP-0220A 77100-DRV-1010 78100-DRV-1020 78100-HAM-4000 79100-TIP-7500 94100-WDG-0700 78200-ASY-7511P 35200-BNC-3100 16200-DRV-1012 78200-DRV-1013 78200-DRV-1030 78200-GFO-0308 73200-HOE-1700 25200-KNF-0810 24200-KNF-0811 24200-KNF-0813 24200-KNF-0863 34200-KNF-7510 20200-KNF-7511 20200-KNF-7512 20200-KNF-7520 66200-KNF-7521 66200-KNF-7524 66200-KNF-7525 66200-KNF-7530 66200-KNF-7531 66200-KNF-7542 22200-KNH-4000 25200-KNH-4010 19200-KNH-4020 66200-PWV-0400 72200-PWV-0405 73200-PWV-0428 73200-PWV-0528 73200-PWV-0500 72200-PWV-0508 72200-PWV-0700 72200-PWV-0708 72200-PWV-0738 72200-PWV-0900 72200-PWV-0908 72200-PWV-0928 72200-PWV-1000 72200-PWV-1008 72200-PWV-1100 72200-PWV-1108 72200-PWV-1200 72200-PWV-1208 72200-PWV-1300 72200-PWV-1308 72200-PWV-1400 72200-PWV-1408 72200-PWV-1608 72200-PWV-1808 72200-QAS-4711 78200-QAS-4712 78200-QCA-4700 10200-QCA-4710 10200-QCA-5000 10200-QCA-5010 11200-QCA-5020 11200-QCA-5030 11200-REL-1010 79200-SLC-1001 13200-SLC-1010 13200-SLC-1020 13200-SLC-1030 13200-SLC-1035 13200-SLC-1037 13200-SLC-1038 13200-SLC-1039 13200-SPK-0200 73200-SPK-0215 73PRODuCT PG # PRODuCT PG #410-PWV-0600 74410-PWV-0608 74410-PWV-0800 74410-PWV-0808 74410-PWV-1000 74410-PWV-1008 74410-PWV-1200 74410-PWV-1208 74410-PWV-1400 74410-PWV-1408 74410-PWV-1600 74410-PWV-1608 74410-PWV-1800 74410-PWV-1808 74410-QCA-5000 12410-QCA-5010 12410-QCA-5020 12410-QCA-5050 13410-SLC-1001 13410-SLC-1022 13410-SLC-1030 13410-SPK-0200 75410-SPN-0300 25410-SPN-0308 25410-TIP-0800 94410-TIP-0801 94410-VRT-1000 24599-KNH-7540 23 & 67600-BNC-5000 68600-HHA-0750 68600-KNH-7520 68600-KNH-7530 68600-KNH-7540 23 & 67600-KNH-7552 68600-KNH-7562 33600-TIP-7500 69600-TIP-7501 69600-TIP-7507 69610-ASY-4020 30610-ASY-4026 30610-TIP-4041 27612-ASY-0711 31612-ASY-0712 31612-ASY-0711L 32612-ASY-0712L 32612-ASY-0711P 31612-ASY-0712P 31612-ASY-0711LP 33612-ASY-0712LP 33612-TIP-0711 27612-TIP-0712 27620-ASY-5010 36620-ASY-5015 36620-ASY-5020 37620-ASY-5020M 37628-ASY-5010 46628-ASY-5015 46628-ASY-5020 47628-ASY-5020M 47675-ASY-1801GM 69675-ASY-1801GN 69680-ACC-0001 38680-ACC-0002 38680-ACC-0003 38680-ACC-1000 79680-ASY-1000 18680-ASY-1000P 43680-ASY-4020 40680-ASY-4026 40682-ASY-0711 41682-ASY-0712 41682-ASY-0711L 42682-ASY-0712L 42682-ASY-0711P 41682-ASY-0712P 41682-ASY-0711LP 42682-ASY-0712LP 42682-ASY-2063 44682-ASY-2064 44682-ASY-2063P 44682-ASY-2064P 44682-ASY-2063M 45682-ASY-2064M 45682-ASY-2063MP 45682-ASY-2064MP 45683-ASY-4020G 50683-ASY-4020L 50683-ASY-0711G 51683-ASY-0712G 51683-ASY-0711L 51683-ASY-0712L 51683-ASY-0711LP 51683-ASY-0712LP 51683-ASY-0711GP 51683-ASY-0712GP 51683-ASY-1000P 50683-KNH-1000 50684-ASY-4020G 56684-ASY-4020L 56684-ASY-0711G 57684-ASY-0712G 57684-ASY-0711L 57684-ASY-0712L 57684-ASY-0711LP 57684-ASY-0712LP 57684-ASY-0711GP 57684-ASY-0712GP 57684-ASY-1000P 56684-KNH-1000 56685-ASY-1801G 69685-ASY-1801GM 69685-ASY-1801GN 69685-ASY-1801L 69685-ASY-1801M 69685-ASY-1801N 69686-ASY-0711G 58686-ASY-0712G 58686-ASY-0711L 58686-ASY-0712L 58686-ASY-0711LP 58686-ASY-0712LP 58686-ASY-0711GP 58686-ASY-0712GP 58693-ASY-4020G 52693-ASY-4020L 52693-ASY-0711G 53693-ASY-0712G 53693-ASY-0711L 53693-ASY-0712L 53693-ASY-0711LP 53693-ASY-0712LP 53693-ASY-0711GP 53693-ASY-0712GP 53693-ASY-1000P 52693-KNH-1000 52694-ASY-4020G 54694-ASY-4020L 54694-ASY-0711G 55694-ASY-0712G 55694-ASY-0711L 55694-ASY-0712L 55694-ASY-0711LP 55694-ASY-0712LP 55694-ASY-0711GP 55694-ASY-0712GP 55694-ASY-1000P 54694-KNH-1000 54880-BSH-1130 79880-BSH-1150 79880-HCL-0001 79880-WDG-0300 78880-WDG-0301 79880-ASY-1000 79200-SPK-0230 73200-SPN-0200 25200-SPN-0208 25200-SPN-0300 25200-SPN-0308 25200-TAD-0530 79200-TIP-0800 16200-TIP-0801 16200-TIP-0817 94200-TIP-1011 16200-TIP-2011 16200-TIP-3000 17200-TIP-3001 17200-TIP-3011 17200-TIP-4011 17200-TIP-7501 94200-VRT-1040 24200-WDG-0206 78200-WDG-0506 78200-WDG-1006 78300-ATM-1000 61300-ATM-1006 61300-ATM-1010 61300-ATM-1020 61300-ATM-1031 61300-ATM-1035 61300-ATM-1036 61300-BNC-4414 61300-BSH-1200 79300-BSH-1205 79300-HLD-4700 60300-HLD-4710 60300-HLD-5000 60300-HLD-5010 60300-SDS-4755 66300-SQR-1500 66400-DRV-1000 79400-DRV-1010 79400-WDG-0300 78400-WDG-0700 78410-KNF-0800 24410-KNF-0801 24410-KNF-0824 67410-KNF-0825 67410-KNF-0830 67410-KNF-0831 67410-KNF-7551 67410-KNF-7553 67410-PWV-0400 74410-PWV-0418 75410-PWV-0518 75Speed-LocTMSeeding Single-ShootSeed BootsSeeding Multi-ShootFertilizer KnivesTillageAccessoriesReferencePRoDuCT PG # PRoDuCT PG # PRoDuCT PG # PRoDuCT PG # Quick Reference Guide2 BTTonce again our Research and Development department has been working hard to roll out some new products and great improvements on existing products. Morris Contour II - 693 SeriesSeed Hawk 686 Series6" Spread Boot Works well for Organic FarmingNew Holland P2060 Case 700 and Flexi-Coil 5500694 SeriesPages 52 - 53Pages 58 - 59Page 61Pages 54 - 55300-ATM-1006New This YearBRUCE & TROY ELIASONNew Holland 440 - 682-ASY-0711/12“I have used these side band openers for the last couple of years. The wear has been really good and should easily last another couple of years." GARY MARTENSFlexi-Coil 5000 - 612-ASY-0711/12“I am very impressed by the performance of my BTT openers. They are built with quality and durability in mind. Most of all these openers just work; and that is what I am looking for.”GARY ARNSTCase IH PHD800 - 684-ASY-0711G/12G“Last season we seeded canola, wheat and lentils and the hoe drill with these openers did a much better job than our disc drill in the same conditions.”AL GARNERBourgault 5710 - 200-KNF-7511“I have been using Bourgault Tillage Tools products for over 12 years. They have always been dependable, the openers last a really long time especially with the added carbide.” SCOTT CARSONBourgault 3320 - 682-ASY-0711L/12L“The placement and emergence has been great. The low draft makes a huge difference in wet conditions. I have no problem recommending BTT openers to anyone” DEVIN CRANFIELDMorris Contour - 683-ASY-4020G“We love the way these openers pull in the field and the finish is great even in very wet conditions. I wouldn’t go back to the factory openers.”At Bourgault Tillage Tools, we strive to build the highest quality openers and provide industry leading service while investing in Research and Development to always improve our products. We build openers for all makes and models of implements. Farmers all over the world rely on the quality our products bring them. We talked to farmers across Western Canada and the united States and they have shared their story about how BTT fits their colorFITS MY CoLoRBut don’t take it from us... Ask one of your neighbours.REG & DEB WALDENBERGERNew Holland P2070 - 684-ASY-0711G/12G“After we made the switch to the BTT openers we gained 4 Gals per acre in fuel savings. They (BTT)are determined to work with me to make the best possible openers for my machine.”3www.tillagetools.com4The Company Behind the Product,The Principles Behind the Company4 BTTW e manufacture a broad range of ground engaging tools for tillage, seeding and fertilizing. our products fit most North American manufactured tillage and air seeding machines, as well as some European and Australian made equipment. See the application chart at the back of this catalogue for a list of the broad range of equipment we fit. our line includes bolt-on products, as well as our patented Speed-LocTM quick change system. We understand the diversity of farming methods and we endeavor to build products to meet those needs. We believe that by listening to our customers and understanding their needs, we will continue to develop products that help our farming customers compete in this ever challenging agricultural economy. We respect and value the relationship we have with all whom we do business with including our Customers, Dealers, Distributors and Suppliers. We strive to provide products that are of excellent Value and high Quality, and back this by our “Performance Guarantee”. We endeavor to provide sales and service people that are helpful and knowledgeable and to provide “Gold Standard” service and support. We believe our employees are our most important asset. We encourage a work environment of mutual respect, regardless of one’s job or title. We believe in compensation systems that pay fair and competitive wages, while also rewarding extra efforts. our Productivity Bonus system in our production areas rewards steady and consistent effort, and helps to keep production costs down. our company wide Profit Share plan encourages all of our employees to work towards common goals. We encourage continued skills and personal development to help our people reach their goals, and in turn the company benefits from a higher skilled work force. Being a responsible corporate citizen is very important to us at Bourgault Tillage Tools. We believe that everyone has a responsibility to help build a world that is sustainable, and we endeavor to operate our business in that way. one example of this is our participation in the “green power” program offered by our electrical supplier. our plan is to continue increasing the purchase of cleaner source energy in order to help clean up our air and environment. We are also moving to cleaner production processes within our plant to ensure minimum pollution to the environment. In tune with our principles of sustainability, we support agricultural practices that will leave the land and the environment healthy and intact for future generations. As we expand globally, we are excited by the challenge to supply our tillage and seeding tools to agricultural markets around the world, and at the same time remain committed to maintaining a strong connection with our domestic and local markets. By understanding, “the company behind the product, and the principles behind the company” we hope that you will be comfortable in dealing with us now and into the future.SincerelyBoard of Directors & All Company AssociatesFP Bourgault Tillage Tools Ltd5www.tillagetools.comLeadershipthrough ExperienceLeadership is multifaceted, but at the heart of leadership, is Vision and Direction. At F.P. Bourgault Tillage Tools Ltd. we are fortunate to have a broad depth of leaders and talents on our Board of Directors and on our Management Team. We do our best to lead and manage our Company based on a Clear Vision, Mission, Core Values and Principles which we agree is the Direction we choose to travel, to create a brighter future, a healthier, happier and more prosperous future for our Farm Customers, our Dealers, our Distributors, our Suppliers and as well as for our Company Associates.More than 25 years ago, from our own expertise in tillage and seeding equipment and from our own farming and hands on field experience, we realized that any tillage or seeding unit was only as good as the tillage and seeding tool openers being used on that machine. In the early and mid 1980’s we recognized the serious problems and limitations with the exist-ing tillage and seeding tool openers. We realized that leadership and innovation was sore-ly lacking in the research and development of tillage and seeding tools. Beginning with the innovations of the parallel wing sweep and the quick change knife tips, for more than 25 years Bourgault Tillage Tools has been providing leadership and innova-tions in the tillage and seeding tools industry. Today, we continue to innovate, in order to provide you, our Farm Customer, with the most innovative and highest quality tillage and seeding tools, and we look forward to continue serving you into the future. Joseph L. BourgaultPresidentBourgault Tillage Tools GUARANTEEBourgault Tillage Tools guarantees the product you purchase will perform to its designed specification under normal conditions.I f the product does not perform its designed task within the first season of use, please inform us of the issue immediately and grant us the opportunity to visit your field to assess the situation. If we cannot recti fy the situation we wil l guarantee you a 100% refund. 1www.tillagetools.com6 BTTTrip Strength ConsiderationsAt Bourgault Tillage Tools we build products that last. our seed openers need to perform in some challenging conditions and we design our products with durability in mind. The end-user has the responsibility to make sure the machine is best suited to the operating conditions. Trip strength is an important consideration. When it comes to trips, heavier is not necessarily better Buying a seeding machine with heavier trips than required for proper penetration, may result in: • Broken or damaged seed openers • Broken or bent shanks • More rocks being pulled to the surface Proper trip strength will save you time and money. When determining the appropriate trip strength, some factors to consider are: soil type, amount of rock and type of seed opener used. Some people believe a heavy trip is a "one size fits all" scenario. This is simply not true. Take the time and make sure you get a machine with appropriate trip strength for your farming operation.Bourgault Tillage Tools reserves the right to limit warranty claims on trip strengths greater than 400 pounds.Warranty TermsWarranty is limited to the replacement of the failed part and does not cover any consequential damages. To obtain warranty, the part must be returned to the dealer. The dealer will complete the Warranty Claim Form.All products are warranted from the date of purchase as follows:1st year pro-rated to a maximum of 100% 2nd year pro-rated to a maximum of 70% 3rd year pro-rated to a maximum of 40%Carbide is warranted for loss only. Chipping of carbide is normal. If the brazing fails and the carbide falls off, return the part to the dealer.Bourgault Tillage Tools WARRANTY7www.tillagetools.com8www.tillagetools.comSpeed-LocTMWhy have so many farmers chosen the patented Speed-LocTM system? Because Speed-LocTM provides more benefits than any other systemConsistent depth control: The upper stop on the Speed-LocTM adapters ensures that your tillage or seeding tools are always running at the same depth. Whether you are direct seeding with an air drill or tilling the soil for seedbed preparation, consistent depth is critical for the uniform emergence of your crop. Peace of mind: When the tools are properly installed on the adapters you don’t have to worry about them falling off in the field. The spring-loaded locking pin ensures that the tools will stay securely in place in all conditions, and we back that up with a 100% guarantee. If you ever lose one of our Speed-LocTM products in the field we will replace it free of charge, no questions asked. Years of trouble-free operation: The Speed-LocTM adapters are designed with durability in mind. The cast adapters are heat treated for increased strength and wear resistance. The pins and bushings are manufactured from stainless steel which is heat treated. The locking mechanism will not rust or corrode. The spring which is a solid plug is housed inside the sealed bushing which prevents soil from seizing up the locking pin. 8 BTTSpeed-LocTM8www.tillagetools.comBelow is an example of both our 200 and 410 series Speed LocTM adapters. These examples are intended to demonstrate how the internal components of these adapters are assembled. If you have any questions about the replacement of these components, please see your local BTT dealer. For a list of replacement parts refer to page 13.Sample assembly of the Patented 200 Series Speed LocTM SystemSample assembly of the Patented 410 Series Speed LocTM System9www.tillagetools.comQuick Change Adapters200-QCA-4700All Bourgault & Ezee-on field cul-tivators, air seeders and air drills1-3/4" (45 mm) Center to Center47 degree1/2" (12 mm) hex head bolts 200-QCA-4710Field cultivators with 47 degree shanks, except Bourgault & Ezee-on1-3/4" (45 mm) Center to Center47 degreeoversize head plow bolts200-QCA-5000Bourgault & Morris Concept 2000 (Not recommended for primary tillage use only for seeding)2-1/4" (57 mm) Center to Center50 degree1/2" (12 mm) hex head bolts10 BTTFITSFITSFITSIf you are not sure which Speed-LocTM adapter to use on your tillage or seeding implement, check the Speed-LocTM application chart on pages 96 - 97 of this catalogue.Use 410 Adapters for heavy duty useSpeed-Loc™ REBATE Bring any 100 Series or Competitor's adapters in to your local dealer and receive a $7.00 cash rebate when you purchase a set of 200 Series adapters. For a limited time only. Check with your local dealer for details.200 Series Speed-LocTMSpeed-LocTMQuick Change Adapters11www.tillagetools.com200-QCA-5010Air drills with 50 degree shanks.(Not recommended for heavy deep tillage)FITSFITSFITS200-QCA-5020European built tillage and seeding implements63 mm - 80 mm Center to Center50 degreeM12-DIN608 10.9 plow bolts200-QCA-5030Horsch shanks57 mm Center to Center50 degreeM12-DIN608 10.9 plow bolts1www.tillagetools.comSpeed-LocTM2-1/4" (57 mm) Center to Center50 degree1/2" (12 mm) plow boltsThis adapter can also be used on a 43 degree shank with the addition of a 7 degree wedge (100-WDG-0700).Refer to our Speed-Loc Adapter chart on pages 96 - 97 Also for Bolt Lengths see pages 98 - 100or what bolts you need200 Series Speed-LocTM12 BTTOn a Bourgault 4-hole shank, the center hole of the adapter should be plugged in order to protect the spring ball from NH3 gases when used as a NH3 applicator. 410-QCA-50002-1/4" (57 mm) Center to Center50 degree1/2" (12 mm) hex head boltsIn rocky or abrasive conditions, the bottom nut may experience excessive wear or damage. This problem is alleviated by placing the bottom bolt in from the back of the shank and putting the nut in the front of the adapter.This adapter can be used on a 43 degree shank by adding a 7 degree plastic wedge, part number 400-WDG-0700.Special note for John Deere: Certain chisel plow models including the 685, 1810, 1820 & 2400 may need a 3 degree wedge to attain proper sweep pitch. See pages 78 - 79 for more information. Shanks with the open bottom bolt-hole require the 047-ACC-1002 to keep the bottom bolt in place.410-QCA-50101-3/4" - 3" (45 mm - 77 mm) Center to Center50 degree1/2" (12 mm) hex head bolts410-QCA-502045 mm Center to Center50 degreeM12-DIN608 10.9 plow boltsBourgault & Morris Magnum chisel plows. Morris Concept 2000 with the LH755 shank.All 50 degree chisel plows except the Bourgault & Morris units identified for use with the 410-QCA-5000 Lemken shanksFITSFITSFITSQuick Change Adapters410 Series Speed-LocTMSpeed-LocTM13www.tillagetools.comSpeed-Loc™ REBATE Bring any 400 Series or Competitor's adapter in to your local dealer and receive a $7.00 cash rebate when you purchase a set of 410 Series adapters. For a limited time only. Check with your local dealer for details.A complete package for the 410 series can be ordered including: bushing, spring ball, pin and dust seal. use this part number to order - 410-SLC-1050Note:410-QCA-505045 mm Center to Center50 degreeM12-DIN608 10.9 plow bolts200-SLC-1037Replacement spring ball for the 200-QCA-5020 & 410-QCA-5050 adapters.200-SLC-1038Replacement spring ball for 200-QCA-5020 adapter for special applications.200-SLC-1039Replacement spring ball for 200-QCA-5030 adapters.410-SLC-1001Replacement bushing for the 410-QCA-5000, 410-QCA-5010 & the 410-QCA-5020. Comes complete with dust seal.410-SLC-1022*Replacement locking pin for all the 410 series adapters. Go to 200-SLC-1020 if 410 Series Adapter is purchased after Nov 1/08.*prior to Nov 1/08410-SLC-1030Replacement spring ball for the 410-QCA-5000, 410-QCA-5010 & the 410-QCA-5020.200-SLC-1001Replacement bush-ing for all 200 series adapters as well as the 410-QCA-5050. Comes complete with dust seal.200-SLC-1010Replacement dust seal for all 200 and 410 series Speed-LocTM adapters.200-SLC-1020Replacement locking pin for all 200 and 410* series adapt-ers.*after Nov 1/08 200-SLC-1030Replacement spring ball for the 200-QCA-4700 adapters.200-SLC-1035Replacement spring ball for the 200-QCA-4710, 200-QCA-5000, 200-QCA-5010 adapters.Speed-LocTM adapter replacement partsKverneland (CLD Grubber) shanksFITSour Speed-LocTM adapters fit more than 60 makes of Cultivators, Chisel Plows and Air Seeders. The chances are we have an adapter that is right for you. Refer to our Speed-LocTM adapter chart on pages 96 - 97. If you can't find your make and model contact us or visit an authorized BTT dealers. For a complete list of bolt lengths see pages 98 - 100or what bolts you needQuick Change Adapters410 Series Speed-LocTM14www.tillagetools.com1www.tillagetools.comBTT14Seeding Single-Shoot14www.tillagetools.comSeeding Single-Shoot Kniveswww.tillagetools.com 1516 BTTCategory 1 - All Category 1 tips on these pages also fit Flexi-Coil Stealth openers.Replacement TipsThis bolt and nut combination is used to secure Category 1 tips, Titan 1/2" tips and Advantage Series Tips. It is important not to over-tighten the bolt when installing the tips. The bolt has a strip of lock-tight applied to the threads so it needs only to be turned in by hand until the shoulder of the bolt makes contact with the nut. Over torquing with a power drill will result in difficulty when removing. Recommended to torque to 84 in/lbs or 7 ft/lbs200-BNC-3100200-BLT-3102200-NUT-3101200-TIP-0800 - 3/4" (19 mm)Chrome Tip200-TIP-0801 - 3/4" (19 mm)Carbide Tip200-TIP-1011- 1" (25 mm) 200-TIP-2011 - 2" (50 mm)Vertical tip with double carbide insertsSpread tip with carbide inserts on the underside of the wingsUnderside ViewSeeding Single-Shoot17www.tillagetools.comIn certain conditions corrosion may make removal of the replaceable tips difficult. We recommend an Anti-Seize product be applied to the tongue of the holder or the cavity of the tip prior to the tip being installed. This will ensure easy removal of tips when they are being changed.200-TIP-3000 - 3" (76 mm)Chrome spread tip200-TIP-3011 - 3" (76 mm)Spread tip with carbide inserts on the underside of the wings 200-TIP-4011 - 4" (101 mm)Spread tip with carbide inserts on the underside of the wings200-TIP-3001 - 3" (76 mm)Spread tip with hard-facing on the underside of the wingsUnderside ViewUnderside ViewUnderside View18Single-Shoot KnivesSeedingBTTSeed Delivery - The seed tube is placed in front of the shank. The seed is delivered through a slot in the rear of the opener. This design provides precise seed delivery and greatly reduces plugging in wet conditions. Tip - This opener fits any Category 1 replaceable tip (sold separately) listed on pages 16 - 17. This gives you the flexibility to go from 3/4” all the way to 4” all available with carbide. Special Instructions - The tube on this holder accept 1-1/4” (31mm) O.D. and 1-1/8” (28mm) O.D. airhose. An insert, 880-BSH-1130, is included for use with the 1-1/8” hose. *Fits - This opener is designed to fit the Bourgault 3310 & 3320 PHD drill, Morris Maxim and Concord Edge-On shanks. * Also available in liquid phosphorous, see page 43* It is recommended that the 680-ASY-1000 be installed using the top 2 notches when mounting on the Bourgault 3310 & 3320Also available in liquid phosphorous, see page 43.047-ASY-1000Seed Delivery - The seed tube is placed in front of the shank. The seed is delivered through a slot in the rear of the opener. This design provides precise seed delivery and significantly reduces plugging in wet conditions. Tip - This opener fits any Category 1 replaceable tip (sold separately) listed on pages 16 - 17. This gives you the flexibility to go from 3/4” all the way to 4” all available with carbide. Special Instructions - 1/2” Carriage bolts are required for installation. Depending on the thickness on your shank we carry a variety of lengths of grade 8 bolts: 2" (961-CRG-2005), 2 1/4" (961-CRG-2255) or 2 1/2" (961-CRG-2505). A 1/2" Stover lock nut (906-NPT-5005) should also be used.Focus strip (047-ACC-1001) is included and recommended for this openerAlso available in liquid phosphorous, see page 35.When installing on a Bourgault 8810 and 5710 with MRB's it is recommended that you install 047-KNH-1000 (part not shown) openers on the shanks immediately beside the MRBs. Ask your dealer for more information.*When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. See page 78 for more informationANGLE BOLT HOLE SPACINGFits 47 and 50 degree shanks 1-3/4" - 2-1/4" (45 - 57 mm)680-ASY-1000FITS: Edge-On ShankSeeding Single-Shoot19www.tillagetools.comSeed Delivery - The seed is delivered behind the shank through a square funnel. This funnel requires a Bourgault or Flexi-Coil square tube seed boot. Round seed boot tubes WILL NOT work with this knife. Tip - This opener fits any Category 1 replaceable tip (sold separately) listed on pages 16 - 17. This gives you the flexibility to go from 3/4” all the way to 4” all available with carbide. Special Instructions - Be sure to use the appropriate driver to protect the tip when installing this knife on the adapters. Please refer to the quick change accessories on pages 78 – 79. When using this knife with a Flexi-Coil square tube seed boot, the back of the funnel should be bent forward until it contacts the seed boot. This closes the gap between the seed boot and the funnel preventing dirt lumps and trash from falling inside the funnel and bridging at the bottom. A square seed boot (300-SQR-1500) is available for all curved bottom shanks. See page 62 for details.200-KNH-4010FITS: 200 series Speed-Loc™Seed Delivery - The seed is delivered behind the shank through a round tube. This seed tube accepts 1-1/4” (31mm) OD and 1-1/8” (28mm) OD hose and an insert, 880-BSH-1130, is included for use with the 1-1/8” hose. Tip - This opener fits any Category 1 replaceable tip (sold separately) listed on pages 16 - 17. This gives you the flexibility to go from 3/4” all the way to 4” all available with carbide.Special Instructions - The holder is designed to fit either a 47° or 50° shank. The slotted top hole makes the bolt hole spacing range from 1-3/4”(45mm) to 2-1/4” (57mm). 050-KNH-0812Choose from any of these replaceable tips. Listed on pages 16 - 17 ANGLE BOLT HOLE SPACINGFits 47 and 50 degree shanks 1-3/4" - 2-1/4" (45 - 57 mm)20Single-Shoot KnivesSeedingBTTSeed Delivery - The seed is delivered through a funnel that fits Bourgault and Flexi-Coil square tube seed boots. Round tubes will not work with this knife. Tip - This knife is available with 3/4" weld-on tips.- 200-KNF-7511 is carbide tipped- 200-KNF-7510 is not carbide tipped. Special Instructions - 100-DRV-1010 should be used to protect the tip when installing this knife. See page 94 for tip removal and welding instructions. When using this knife with a Flexi-Coil square tube seed boot, the back of the funnel should be bent forward until it contacts the seed boot. This closes the gap between the seed boot and the funnel preventing dirt lumps and trash from falling inside the funnel and bridging at the bottom.This opener is also available with liquid phosphorous. See Page 35 for product details. Seed Delivery - The seed is delivered through a funnel that fits Bourgault and Flexi-Coil square tube seed boots. Round tubes will not work with this knife. Tip - This opener is very similar to the 200-KNF-7511. It has the same old style funnel with a step in it directly behind the tip. This funnel is less susceptible to wear as the 200-KNF-7511. This knife was brought back due to popular demand in some areas. Special Instructions - 100-DRV-1010 should be used to protect the tip when installing this knife. See page 94 for tip removal and welding instructions. When using this knife with a Flexi-Coil square tube seed boot, the back of the funnel should be bent forward until it contacts the seed boot. This closes the gap between the seed boot and the funnel preventing dirt lumps and trash from falling inside the funnel and bridging at the bottom.This opener is not available with liquid phosphorous. 200-KNF-7511 & 200-KNF-7510FITS: 200 series Speed-Loc™FITS: 200 series Speed-Loc™200-KNF-7512Seeding Single-Shoot21www.tillagetools.comPacking ConsiderationsIt is recommended to use on-row packing to achieve good soil to seed contact for even germination. Generally, the packer wheel width should be equal to or greater than the width of the tip on the opener. The ideal result is to have an uniform depth of firm soil over the full seed row. The Replaceable TipOne of our most popular innovations is the Replaceable Tip. The tongue and groove configuration allows customers to change tips as they wear out, instead of the whole opener. You can also change tip sizes if conditions change in your operation. There are several things to keep in mind when changing or installing new tips: Seedbed WidthIdeal Packer WidthBefore installing new tip, clean off the tongue of the holder of any rust or debris with a wire brush. Always use an Anti-Seize product on the tongue of the holder prior to installing the tip. If a worn out tip is seized on the tongue, you can use a 3 pound hammer on one of the sides to break the side wall. Always wear safety glassesWhen installing new tips it is important to use a new bolt and nut combination. Over torquing will result in difficulty when removing. Torque to 84 in/lbs or 7ft/lbs.When installing knife on Speed-Loc adapter, always use the correct driver.22Single-Shoot KnivesBTTSeedingSeed Delivery – The seed is delivered through a round tube that accepts 1-1/4” (31 mm) OD and 1-1/8” (28 mm) air hose. An insert, 880-BSH-1130, is included for use with the 1-1/8” hose. Tip – These 1” (25 mm) vertical knives are our longest wearing openers. The high chrome cast tip has a double carbide insert that protects the bottom 2” (50 mm) of the tip. Because of the near vertical approach, this opener will pull harder than conventional knives, however, it will also throw less soil and pull out fewer rocks. Special Instructions - Driver 200-DRV-1030 should be used to protect the tip when installing the knife on the adapter. Seed Delivery – The seed tube for this knife accepts 1-1/4" (31 mm) OD and 1-1/8" (28 mm) OD air hose. An insert, 880-BSH-1130, is included for use with the 1-1/8" hose.Tip – These 1” (25 mm) vertical knives are our longest wearing openers. The high chrome cast tip has a double carbide insert that protects the bottom 2” (50 mm) of the tip. Because of the near vertical approach, this opener will pull harder than conventional knives, however, it will also throw less soil and pull out fewer rocks.Special Instructions - For fastener information refer to pages 98 - 101.047-VRT-1040200-VRT-1040FITS: 47 degree shankFITS: 200 Series Speed-LocTMSeed Delivery - The seed is delivered behind the shank through a round tube. The seed tube is spaced farther back to alleviate plugging in heavy gumbo soils. This seed tube accepts 1-1/4” (31mm) OD and 1-1/8” (28mm) OD hose and an insert, 880-BSH-1130, is included for use with the 1-1/8” hose.Tip - The chrome weld-on tip is designed to be used in non abrasive soils or heavy gumbo. Use Driver 100-DRV-1010 to protect the tip when installing on the adapter. See page 94 for tip removal and welding instructions. 200-KNF-7542FITS: 200 Series Speed-LocTMSeeding Single-Shoot23www.tillagetools.comSeed Delivery – Seed is delivered through a 1-1/4” (31 mm) OD or a 1-1/8” (28 mm) OD air hose. An insert, 880-BSH-1130 is included for use with the 1-1/8” air hose. Tip – This knife can be used with either 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold separately) found on page 69. Both of these tip are 3/4” (19 mm) wide. The tips are held on with a bolt and nut combination, part number 600-BNC-5000. Fits – The top hole is slotted to fit a 1-3/4” or a 2-1/2” (57 or 63 mm) bolt hole spacing. It can be used on a 43° shank with the addition of a 7° wedge, 400-WDG-0700. Seed Delivery – Seed is delivered through a 1-1/4” (31 mm) OD or a 1-1/8” (28 mm) OD air hose. An insert, 880-BSH-1130 is included for use with the 1-1/8” air hose. This opener works best with the Bourgault shank. Tip – This knife can be used with either 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold separately) found on page 69. Both of these tip are 3/4” (19 mm) wide. The tips are held on with a bolt and nut 600-BNC-5000. Fits – This cast bolt-on knife holder is designed to fit on a 47° shank with 1-3/4” (45 mm) bolt hole spacing. 600-KNH-7540FITS: 47 and 50 degree shanksFor replacement tip options see page 69For replacement tip options see page 69599-KNH-7540FITS: 47 and 50 degree shanks24Single-Shoot KnivesBTT Some Openers on this page can be used with the 300 Seed Boot System. Refer to pages 60 - 61 for options Seed Delivery - This opener is to be used in conjunction with the 300 series seed boot system using attachment 300-ATM-1035. Refer to pages 60 - 61.Tip - This knife uses a 3/4” weld-on tip with carbide (200-KNF-0811) or chrome tip (200-KNF-0810). For replacement tip (410-TIP-0800) see page 94.Special Instructions - Driver 400-DRV-1010 should be used to protect the tip when installing this knife on the adapter. 200-KNF-0811 & 200-KNF-0810FITS: 200 Series Speed-LocTM410-KNF-0801 & 410-KNF-0800Seed Delivery – This opener is to be used in conjunction with the 300 series seed boot system using attachment 300-ATM-1031. Refer to pages 60 - 61.Tip – This knife has a 3/4” (19 mm) carbide tip (200-KNF-0801), it can also be purchased with a chrome tip (200-KNF-0800). Replacement weld-on tips are available for this product (410-TIP-0800 & 410-TIP-0801) see page 94 for instructions. Special Instructions – Driver 400-DRV-1010 should be used to protect the tip when installing this knife on the adapter. FITS: 410 Series Speed-LocTM410-VRT-1000FITS: 410 Series Speed-LocTMSeed Delivery – This opener is to be used in conjunction with the 300 series seed boot system using attachment 300-ATM-1031. Refer to pages 60 - 61.Tip – These 1” (25 mm) vertical knives are our longest wearing openers. The high chrome cast tip has a double carbide insert that protects the bottom 2” (50 mm) of the tip. Because of the near vertical approach, this opener will pull harder than conventional knives, however, it will also throw less soil and pull out fewer rocks. Special Instructions - Driver 200-DRV-1030 should be used to protect the tip when installing the knife on the adapter. The opener is designed to be installed on a heavy duty chisel plow. Seed Delivery – This opener is to be used in conjunction with the 300 series seed boot system using attachment 300-ATM-1035. Refer to pages 60 - 61Tip – This knife has a 3/4" (19 mm) carbide tip welded on. A second piece of carbide is installed above the primary carbide on the opener to provide extra wear in highly abrasive soil. The tip has a 75° approach angle which means that it will not lift and pull many rocks to the surface. Special Instructions – Driver 200-DRV-1012 should be used to protect the tip when installing this knife on the adapter. 200-KNF-0813FITS: 200 Series Speed-LocTMSeedingSeeding Single-ShootSeed Delivery - A 1-1/2” to 1-3/4" seed spread can be expected behind this hoe opener. This is an economical seed opener for producers wanting to maintain a wider seed spread. This opener works best with 1" single tube seed boot. Opener Specifications - This hoe type opener is 1-3/4” (45 mm) wide. It has a long wearing high chrome tip that runs through the ground at a fairly vertical angle. The long wearing vertical tip promotes better soil flow along with less rock pulling. Special Instructions - Use 100-DRV-1020 when installing200-HOE-1700FITS: 200 Series Speed-LocTM25www.tillagetools.comSome Openers on this page can be used with the 300 Seed Boot System. Refer to pages 60 - 61 for options Seed Delivery – A 3” seed spread can be expected behind this spoon which allows for some nitrogen fertilizer to be placed with the seed. This is an economical seed opener for producers wanting to maintain a wider seed spread. This opener works best with more 1" to 1-1/4" single tube seed bootsOpener Specifications – This spoon opener is a 3” (76 mm) wide. The 410-SPN-0300 is made from 1/4” (6 mm) material and the 410-SPN-0308 is from 5/16” (8 mm) material. It is a very easy pulling opener and soil disturbance is moderately low if working speed is kept around 4 1/2 miles (7.52 km) per hour. Special Instructions – Use 400-DRV-1000 when installing410-SPN-0300 & 410-SPN-0308FITS: 410 Series Speed-LocTMQuick ChangeSeed Delivery – This opener is to be used in conjunction with the 300 series seed boot system using attachment 300-ATM-1035. Refer to page 61.Tip – This knife holder can be used with any of the Category 1 Replaceable Tips (tips sold separately) on pages 16 - 17. Special Instructions – Be sure to use the appropriate driver to protect the tip when installing knife on the adapters. The driver is dependent on the tip you choose, please refer to the accessories on pages 78 - 79. 200-KNH-4000FITS: 200 Series Speed-LocTMSeed Delivery - The 200-SPN-0200 gives you a 2" spread while the 200-SPN-0300 gives you 3". The larger spread allows for some nitrogen fertilizer to be placed with the seed. This is an economical seed opener for producers wanting to maintain a wider seed spread. This opener works best with 1" to 1-1/4" single tube seed boots. Opener Specifications - The 200-SPN-0200 & 200-SPN-0208 are 2-1/4” (57 mm) wide. While the 200-SPN-0300 & 200-SPN-0308 are 3” (76 mm) wide. The 200-SPN-0200 and 200-SPN-0300 is made from 1/4” (6 mm) material while the 200-SPN-0208 and 200-SPN-0308 is from 5/16” (8 mm) material. It is a very easy pulling opener and soil disturbance is moderately low if working speed is kept around 4 1/2 miles (7.52 km) per hour. 200-SPN-0200 & 200-SPN-0208 FITS: 200 Series Speed-LocTMor 200-SPN-0300 & 200-SPN-0308 26 BTT1www.tillagetools.comFind Your Shank TypeWith the development and increased use of multi-shoot knives for one pass seed & fertilizer placement the following question is often asked:“How much fertilizer can I place with the seed without causing germination problems or seedling damage?”The answer to this question is very complex.It is advisable to consider the PRECAUTIONS & RISK FACTORS* listed below when using any products between pages 30 to 59:1. FERTILIZER SOURCE – depending on the type of fertilizer used, damage can occur either through ammonia toxicity or salt effects or a combination of both as in the case with blended fertilizer.2. FERTILIZER RATES – typically, the risk of crop seedling injury increases with higher rates of fertilizer. 3. CROP TYPE – crops vary in their ability to tolerate seed-placed fertilizer, with cereals being able to withstand more than oilseeds and pulses falling somewhere in between.4. SEED QUALITY – with everything else equal, seed with poor vigor will suffer more damage from seed-placed fertilizer than seeds with high vigor. If seed vigor is questionable, have it tested. 5. SOIL MOISTURE – with soil at or near saturation point, the toxic effects of fertilizer are diluted so seeds can germinate & develop with few problems. If conditions are very dry, reduce the amount of fertilizer placed near the seed.6. SOIL TEXTURE – fine textured soils such as clay or clay loam tend to also reduce these toxic effects over coarse or sandy soils because of their ability to hold more water & absorb toxic free ammonia.7. ORGANIC MATTER – higher levels of organic matter (OM) in a soil also lessen the risk of damage. For example, reduced levels of OM on dry, eroded hilltops seedlings are more prone to injury.8. SEEDBED UTILIZATION – or SBU is the proportion of the seedbed used for seed & fertilizer placement. Ex: 2”openers on 10” row spacing have a SBU of 20%. As SBU increases, the crops tolerance to higher rates of seed-placed fertilizer increases.9. SEEDING DEPTH, PACKING & SPEED – these points are also factors to take into consideration as they may compromise seed & fertilizer placement as well as the overall quality of the seeding operation. 10. ADVERSE SEEDING CONDITIONS – excessively wet or dry soil at time of seeding can cause erratic seed placement, poor seed-to-soil contact and poor separation which will also affect the amounts of seed placed fertilizer you can apply.If any of the above conditions are less than ideal, it is advisable to reduce your fertilizer rate accordingly.** It is our company’s policy not to recommend or endorse specific “safe” rates of fertilizer for multi-shoot openers due to the wide variance in the PRECAUTIONS & RISK FACTORS listed above. Most of our knives are tested at independent research facilities to verify only the placement of seed and fertilizer. We suggest that producers consult their local agronomist to establish acceptable fertilizer rates for their unique seeding conditions. Look For Your Fertilizer TypeFor easy reference, each fertilizer-type has a color associated with it. The color/fertilizer association is as follows:Page 48Seeding / Multi-Shoot OpenersLook For Your Fertilizer TypeFor easy reference, each fertilizer-type has a color associated with it. The color/fertilizer association is as follows:27www.tillagetools.comTheOpen bottom design reduces plugging and allows seed to be delivered into a paired row.Unique sloped design reduces soil throw and draft.Carbide on the nose provides excellent penetration and wear resistance. Carbide on the nose provides excellent penetration and wear resistance.Carbide on the wing increases the wear resistance while providing a cutting edge.Carbide underneath the tip pro-vides additional wear resistance and provides a firm seed bed.Replaceable tip cast from high chrome.Unique wing angle reduces soil throw and draft. Replaceable tip cast from high chrome.Paired Row610-TIP-4041Side Band612-TIP-0711(left) 612-TIP-0712(right)Our Advantage Series is a complete line of proven low disturbance direct seeding openers. By providing lower draft, less seedbed fracturing, and a smoother field finish, farmers have come to trust the Advantage Series. The "Advantage" of these openers is in the tip. Below is a description of how these tips can provide you with an Advantage. C-SHANKPages 30-3728 BTTSeeding / Multi-Shoot OpenersAll of the above multi-shoot knives are bolt-on only. For available Speed-LocTM (Knock-on) Knives please refer to page 34 & 35HOW TO FIND YOUR OPENERINSTALLATION NOTES FOR C-SHANKSSide Band612-ASY- 0711/0712612-ASY- 0711L/0712L 600-ASY-7562Page 31 Page 30 Page 30 Page 36 Page 36 Page 37Also available with Maxquip tubePage 32 Page 33610-ASY-4020 610-ASY-4026 620-ASY-5015 620-ASY-5010 620-ASY-5020Paired Row Paired RowSingle RowC-SHANKHorizontal Seed/Fertilizer SeparationHorizontal and Vertical SeparationAvailable with 1/4 OD" liquid P tubeAvailable with 1/4" OD liquid P tubeFor 047, 610 & 612 Series openers in this section:• For 1" shanks use 1/2" x 2" Grade 8 Carriage Bolt, 961-CRG-2005 • For 1 1/4" shanks use 1/2" x 2 1/4" Grade 8 Carriage Bolt, 961-CRG-2255 • When installing on a 50° shanks other than Bourgault or Ezee-On use wedge 880-WDG-0300 or 880-WDG-0301. See page 78 for more information • When using these wedges different bolt lengths are required. • For 1" shank use 1/2" x 2 1/4" Gr.8 Bolt, 961-CRG-2255 • For 1 1/4" shank use 1/2" x 2 1/2" Gr.8 Bolt, 961-CRG-2505 • 1/2" Stover Lock Nuts, 906-NPT-5005• Torque shank bolts to 80 - 100 ft/lbsFor 600 & 620 Series openers in this section• Use 1/2" Hex Head bolts• Torque shank bolts to 80 - 100 ft/lbs29www.tillagetools.comPAIRED ROWPAIRED ROWC-ShankMulti-Shoot OpenersPlease Refer to the Assemblies Section (page 80)610-ASY-4020Double-Shoot GranularSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide. Tube Sizes: Both fertilizer and seed are delivered through 1 1/4" (31mm) OD tubes. A bushing (880-BSH-1130) is provided to accept 1 1/8" (28mm) hoses. Special Instructions: - Shank trip initial tension of 230 lbs or greater is required. - On-row packing is recommended; minimum packer width should be 3-1/2" rubber. 3 - 1/2" steel packer not recommended.Special Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. See page 78 for more informationPrecautions and Risk FactorRefer to page 26 for more information on precautions and risk factors. 610-ASY-4026Double-Shoot LiquidSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide. Tube Sizes: The seed is delivered through a 1 1/4" (31mm) OD tubes. A bushing (880-BSH-1130) is provided to accept 1 1/8" (28mm) hoses. The liquid tube has a 1/4" (6mm) OD. Special Instructions: - Shank trip initial tension of 230 lbs or greater is required. - On-row packing is recommended; minimum packer width should be 3-1/2" rubber. 3-1/2" steel packer not recommended.Special Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. See page 78 for more informationPrecautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. Rear View 30 BTTFor Fasteners:. Refer to page 29. Seeding / Multi-Shoot OpenersSIDE BANDSIDE BANDC-Shank47 & 50 degreeFITSThe Advantage Series of Double-Shoot openers are designed to allow for single-pass seeding while maintaining a low-draft.ULTRA-LOW DRAFT • SMOOTH FIELD FINISHPlease Refer to the Assemblies Section (pages 81)Double-Shoot GranularSeed & Fertilizer Placement: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing. Tip: The replaceable 3/4" Side Band tip is protected with a 3/4" carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). See Special Instructions below for more information on installation.Tube Size: The seed and fertilizer tube have a 1-1/4" OD. A bushing (880-BSH-1130) is provided so a 1 1/8" (28mm) hoses can also be used.Special Instructions: When ordering be sure to specify half left wings (612-ASY-0711) and half right wings (612-ASY-0712) It is very important to install these openers with the wings directed to the center of the machine. Special Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. See page 78 for more information.Precautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors.1 1/2"3/4"SEEDFERTILIZER612-ASY-0711 (left)612-ASY-0712 (right) shown above612-ASY-0712P (right) shown above612-ASY-0711P (left)Triple-Shoot Granular with Liquid PhosphorusNote: All information from the opener directly above applies to this product as well. This opener was developed for producers that want the option of adding liquid phosphorus to the seed row. A 1/4" (6mm) stainless steel tube is welded to the back of the seed tube of the 612-ASY-0711 & 612-ASY-0712 openers. Special Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. See page 78 for more informationPrecautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. Rear View Liquid Phos31www.tillagetools.comPrecautions and Risk Factors. Refer to page 26. 32 BTTC-ShankMulti-Shoot Openers612-ASY-0712L (right) shown above 612-ASY-0711L (left) andDouble-Shoot LiquidSeed & Fertilizer Placement: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The replaceable 3/4" Side Band tip is protected with a 3/4" carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). See Special Instructions below for more information on installation.Tube Size: The fertilizer is delivered through a 1/4" (6 mm) tube. The seed tube is 1-1/4" also a bushing (880-BSH-1130) is provided so a 1 1/8" (28mm) hoses can also be used. The liquid tube can be removed to switch to a granular system.Special Instructions: It is very important to install these openers with the wings pointing into the center of the machine. When ordering be sure to specify half left wings (612-ASY-0711L) and half right wings (612-ASY-0712L). Special Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301.(See page 78 for more information)1 1/2"3/4"SEEDFERTILIZERSIDE BANDFor Fasteners. Refer to page 29. ASSEMBLY DRAWINGSAre you looking for specific parts or need to know how these openers are assembled?The assembly drawings in the back of this catalog are a great resource. All of our mutli-shoot openers are featured in the assembly section. Located on Pages 80 - 93. 81www.tillagetools.com Reference675-ASY-1801GM & 675-ASY-1801GN Item# Part# 675-ASY-1801GM 675-ASY-1801GN 1 047-HLD-1000 n n 2 612-CAP-1000 n n 3 612-TUB-1010 n n 4 200-BNC-3100 n n 5 200-TIP-0801 n n 6 047-ACC-1001 n n 7 675-TUB-5025 n 8 675-TUB-1285 n 9 880-BSH-1130 n n 10 908-NNI-2504 n n 11 942-HRG-2004 n n 12 880-HCL-8117 n nRequires a hose clamp (880-HCL-8117)GRANULAR GRANULAR2453911 1018 7 12 612-ASY-0711 • 612-ASY-0712Bolt-On Side-BandDouble & Triple Shoot Knife Item# Part# 1 612-HLD-0711 n n n n 2 612-HLD-0712 n n n n 3 612-CAP-1000 n n n n n n n n 4 942-HRG-2004 n n n n n n n n 5 200-BNC-3100 n n n n n n n n 6 612-TIP-0711 n n n n 7 612-TIP-0712 n n n n 8 908-NNI-2504 n n n n n n n n 9 880-BSH-1130 n n n n n n n n 10 047-TUB-2540 n n n n 11 612-TUB-6061 n n n n 12 880-HCL-1828 n n n n n n n n 13 880-CPL-2500 n n n n 14 880-HCL-0001 n n n n (not shown)612-ASY-0711 (left)612-ASY-0711P (left)612-ASY-0712 (right)612-ASY-0712P (right)612-ASY-0712L (right)612-ASY-0712LP (right)612-ASY-0711L (left)612-ASY-0711LP (left)45Second bushing is required for Granular assembly1 or 27 or 6981310 9143126** Requires a hose clamp (880-HCL-1828)or (Not Shown)NOTES* The optional focus strip (047-ACC-1001) is reccomended but not included for openers 675-ASY-1801GM & 675-ASY-1801GN.(not shown)112 - 880-BSH-1130 are included with the granular openers2 - 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.76Single-Shoot Front Delivery, Advantage Series and Titan OpenersC-Shank Assemblies* Identifies optional components not included in the assembly. Please order separately.BTT610-ASY-4020344195106728Advantage Series'C' Shank Granular Fertilizer Item# Part# 1 610-HLD-2000 2 610-TIP-4041 3 610-TUB-1001 4 880-BSH-1130 5 047-CAP-1000 6 942-HRG-0754 7 906-NPT-2505 8 200-BNC-3100 9 908-NNI-2504 10 942-HRG-2004GRANULAR610-ASY-4026Advantage Series 'C' Shank Liquid Fertilizer28451091376Item# Part# 1 610-HLD-2000 2 610-TIP-4041 3 610-TUB-2526 4 880-BSH-1130 5 047-CAP-1000 6 942-HRG-0754 7 906-NPT-2505 8 200-BNC-3100 9 908-NNI-2504 10 942-HRG-2004Seeding / Multi-Shoot OpenersSIDE BANDSIDE BANDC-Shank47 & 50 degreeFITS612-ASY-0712LP (right) shown above612-ASY-0711LP (left)Triple-Shoot Liquid Fertilizer with Liquid PhosphorusNote: All information from the 612-ASY-0711L and 612-ASY-0712L applies to this product as well.This opener was developed for producers that want the option to add liquid phosphorus to the seed row. A 1/4" (6mm) stainless steel tube is welded to the back of the seed tube of the 612-ASY-0711L & 612-ASY-0712L openers. Special Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. (See page 78 for more information)Precautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. Rear View Liquid PhosDouble-Shoot LiquidSeed & Fertilizer Placement: Fertilizer is placed behind the wing and slightly above the seed row, the seed is placed directly behind the knife in the middle of the row. Tip: This knife opener is designed to be used in conjunction with tip 600-TIP-7507. Fastener 600-BNC-5000 is used to attach this tip to the holder. The tip has a carbide insert on the nose and a solid carbide wing on the side. Tip sold separately see page 69.Tube Size: The fertilizer is delivered through a 1/4" (6 mm) tube. The seed tube is 1-1/4" a bushing (880-BSH-1130) is also provided so a 1 1/8" (28 mm) hoses can also be used.Special Instructions: The opener should be used with a pressurized system. The top hole is slotted to fit 1-3/4" to 2-1/2" (44 - 63 mm) bolt hole spacing. It can be used on a 43 degree shank with the addition of 7 degree wedge 400-WDG-0700.Precautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. 600-KNH-7562SEEDFERTILIZER1/2" 3/4"3/4"Precautions and Risk Factors. Refer to page 26. 33www.tillagetools.com34 BTTSIDE BANDC-ShankMulti-Shoot OpenersDouble-Shoot LiquidSeed & Fertilizer Placement: The liquid fertilizer is delivered to the side and above the seed row. See seed placement graph for a more detailed description of placement. Tip: This weld-on 3/4" tip is protected with carbide on the nose and has a solid carbide wing.Tube Size: The fertilizer is delivered through a 1/4" (6 mm) tube. The seed funnel on this knife fits the Bourgault and Flexi-Coil square tube seed boot.Special Instructions: This knife is designed to be used with a pressurized liquid systems. A hoses clamp 960-HCL-2563 must be used to secure the liquid line to the stainless steel tube. The clamp also prevents liquid fertilizer from running down the tube which can cause mud to build up resulting in funnel plugging. Driver 100-DRV-1010 should be used to prevent damage to the tip when installing this knife on the adapter. Replacement weld-on tip 200-TIP-0817 is available. See page 94 for instructions on how to remove the worn tips and weld on the new ones. 200-KNF-0863SEEDFERTILIZER1/2" 3/4"3/4"Speed-LocTM880-ORF-0001This orifice is used to concentrate and direct the flow of liquid fertilizer.Seeding / Multi-Shoot OpenersLIQUID PHOSPHORUSC-Shank47 & 50 Degree or 200 Series Speed-LocTM AdaptersFITSDouble-Shoot Liquid PhosphorusSeed & Fertilizer Placement: The liquid phosphorus is delivered with the seed down the center of the row. Tip: This weld-on 3/4" tip is protected with a carbide tip. Replacement weld-on tips are available for this knife. See Special Instructions below for part #'s.Tube Size: The fertilizer is delivered through a 1/4" (6 mm) tube. The seed funnel on this knife fits the Bourgault and Flexi-Coil square tube seed boot.Special Instructions: Driver 100-DRV-1010 should be used to prevent damage to the tip when installing this knife on the adapter. The replacement weld-on chrome tip 100-TIP-7500 and carbide tip 200-TIP-7501 are available. See page 94 for instructions on how to remove the worn tips and weld on the new ones. 200-ASY-7511PThe liquid phosphorus tube is added to our 200-KNF-7511 knife.35www.tillagetools.comLIQUID PHOSPHORUS Double-Shoot Liquid PhosphorusSeed & Fertilizer Placement: Liquid phosphorus is delivered through a 1/4" (6 mm) stainless steel tube with seed. Tip: This knife can be used with any Category 1 Replaceable Tips found on pages 16 - 17 (Tips sold separately). 200-BNC-3100 should be used to install the Category 1 tips. Tube Size: The fertilizer is delivered through a 1/4" (6 mm) tube. The seed tube is 1-1/4", a bushing (880-BSH-1130) is also provided so 1 1/8" (28 mm) hoses can also be used.Special Instructions: The top hole is slotted to fit 1-3/4" to 2-1/2" (44 - 63 mm) bolt hole spacing. This opener comes with the recommended focus strip (047-ACC-0001) which concentrates the flow seed in the trench. Mounting Instructions: When installing on a 50° curved bottom shank use wedge 880-WDG-0300 or 880-WDG-0301. (See page 78 for more information)047-ASY-1000P• The Titan's Paired-Row design places seed and fertilizer (Granular or NH3 - NH3 with attachment) in separate rows in a single-pass. Separation is both vertical and horizontal. Fertilizer is placed in a narrow band below and between the paired seed rows.• Narrow 1/2" wide fertilizer knife results in lower disturbance and more precise fertilizer placement than other paired-row designs, resulting in complete fertilizer/seed separation in most conditions.• The modular design allows only the worn part to be replaced. Carbide is used on all main wear surfaces to prolong the life of your investment. For replacement parts see assembly pages 82 & 83Equipment Requirements• Seeding system must be set up to Double-Shoot seed and fertilizer in separate distribution• Shank trip initial tension of 450 lbs. or greater is required• On-row packing is recommended; minimum packer width should be 3-1/2"• The seed and granular tubes for these knives accept 1-1/8" - 1-1/4" hosesC-ShankMulti-Shoot OpenersPlease Refer to the Assemblies Section (pages 82 & 83)Rear View Paired Row Granular Single Row GranularFITS C-Shank 47 & 50 degree FITS C-Shank 47 & 50 degree GRANULAR GRANULAR620-ASY-5010 620-ASY-501536 BTTSeeding / Multi-Shoot OpenersTHE TITAN is designed to allow for vertical and horizontal separation of seed and fertilizer.Seed/Fertilizer Placement The Titan Series is unique in that it gives you the flexibility to choose your fertilizer depth. The tip can be adjusted to deliver fertilizer either as deep as 1 1/2" or, for less separation, 3/4". The choice is up to you. The diagram shown is typical of what has been observed in actual field trials with the Titan paired-row. Because soil and operating conditions can vary, exact placement may not be achieved in all situations.Third Party TestingIn the spring of 2005, PAMI was contracted to evaluate the Titan’s performance against a popular competitor’s paired-row opener. Separate plots of wheat and Canola were seeded with various applications of urea fertilizer ranging from 0 to 120 lbs per acre on 10" shank spacing. Following crop emergence, plant counts were done and recorded. The following conclusion was written:Based on limited field testing with canola and wheat it can be concluded that the agronomic performance of the Bourgault Tillage Tools prototype paired-row opener is equal to and slightly superior to the "competitor’s" paired-row opener.1-1/2"C-Shank47 & 50 degreeFITSPaired Row NH3 Paired Row - NH3 MaX-QuipFITS C-Shank 47 & 50 degree FITS C-Shank 47 & 50 degree 620-ASY-5020M620-ASY-502037www.tillagetools.comEDGE-ONPages 40-4738 BTTImportant Edge-On Accessories680-ACC-0001Spacer plate is required for the Concord when installing any Edge-On product.Sold separately. 680-ACC-0002 680-ACC-0003Spacer plate is required when installing the 680-ASY-4020 on the Bourgault 3310 & 3320. Sold separately. Spacer plate is required when installing the 680-ASY-4026 on the Bourgault 3310 & 3320. Sold separately. Seeding / Multi-Shoot OpenersHOW TO FIND YOUR OPENER39www.tillagetools.comINSTALLATION NOTES FOR EDGE-ON SHANKSNote: (fasteners, adapters and the spacer plate are ordered as separate items)Use the following for a Bourgault 3310 & 3320 Edge-On shank: • 3/8" x 2 1/4" Grade 8 Carriage Bolts, 960-CRG-3755 • 3/8" Stover Lock Nut, 906-NPT-3755 • For the 680-ASY-4020 use spacer plate 680-ACC-0003 • For the 680-ASY-4026 use the 680-ACC-0002 • Our Advantage Series openers are not designed to fit the Bourgault 3320 XTC Air Drill. Use the following for the Morris Maxim: • 3/8" x 2 1/4" Grade 8 Carriage Bolts,960-CRG-3755 • 3/8" Stover Lock Nut, 906-NPT-3755Use the following for a Concord: • Spacer Plate, 680-ACC-0001 • 1/2" x 2" Grade 8 Hex bolt, 946-HRG-2005 • 1/2" Stover Lock Nut, 906-NPT-5005Note: Bourgault 3310 & 3320 OwnersWhen Installing any Edge-On Paired Row opener on the Bourgault 3310 & 3320 always use the top and bottom notches of the shank, as shown beside. Page 46 Page 46 Page 47Also available with Maxquip tube628-ASY-5015 628-ASY-5010 628-ASY-5020Paired RowSingle RowEDGE-ONAvailable with 1/4 OD" liquid P tubeAvailable with 1/4" OD liquid P tubeAvailable with 1/4" OD liquid P tubeAvailable with 1/4" OD liquid P tubeHorizontal Seed/Fertilizer SeparationHorizontal and Vertical SeparationSide Band Paired Row682-ASY- 2063/2064682-ASY- 0711/0712682-ASY- 0711L/0712L682-ASY- 2063M/2064M 680-ASY-4020 680-ASY-4026Page 41 Page 42 Page 44 Page 45 Page 40 Page 40Multi-Shoot Openers - Advantage SeriesEDGE-ONGRANULAR680-ASY-4020680-ASY-4026Double-Shoot GranularSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide. Tube Size: Both fertilizer and seed are delivered through 1 1/4" (31mm) OD tubes. A bushing (880-BSH-1130) is provided to accept 1 1/8" (28mm) hoses.Special Instructions: - Shank trip initial tension of 230 lbs or greater is required. - On-row packing is recommended; minimum packer width should be 3-1/2" rubber. 3 - 1/2" steel packer not recommended. - When installing on the Bourgault 3310 & 3320 shank always use the top and bottom notches of the shank for any of our Paired Row openers. - 680-ACC-0003 is required when installing on the Bourgualt 3310 & 3320. Precautions and Risk FactorsRefer to page 26 for more information Double-Shoot LiquidSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide. Tube Size: The seed is delivered through a 1 1/4" (31mm) OD tube. A bushing (880-BSH-1130) is provided to accept 1 1/8" (28mm) hoses. The liquid tube is 1/4" (6mm) OD.Special Instructions: - Shank trip initial tension of 230 lbs or greater is required. - On-row packing is recommended; minimum packer width should be 3-1/2" rubber. 3-1/2" steel packer not recommended. - When installing on the Bourgault 3310 & 3320 shank use the top and bottom notches of the shank. When mounting in the bottom notches 680-ACC-0002 is required when installing on this drill as well.Precautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. Rear View PAIRED ROWPAIRED ROW40 BTT Please Refer to the Assemblies Section (page 84)For Fasteners. Refer to page 39. Seeding / Multi-Shoot OpenersThe Advantage Series of Double-Shoot openers are designed to allow for single-pass seeding while maintaining a low-draft.Edge-On ShankBourgault PHD (except XTC), Concord, Morris FITSGRANULAR682-ASY-0711 (Left) 682-ASY-0712 (Right) shown above682-ASY-0711P (Left) 682-ASY-0712P (Right) shown aboveTriple-Shoot Granular With Liquid PhosphorusNote: All information from the opener directly above applies to this product as well. This opener was developed for producers that want the option of adding liquid phosphorus to the seed row. A 1/4" (6mm) stainless steel tube is welded to the back of the seed tube on the 682-ASY-0711 & 682-ASY-0712 openers.Precautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. GRANULAR LIQUID PHOSDouble-Shoot GranularSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing. Tip: The 3/4" replaceable Side Band tip is protected with a 3/4" carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). See Special Instructions below for installation information.Tube Size: Both fertilizer and seed are delivered through 1 1/4" (31mm) tubes. A bushing (880-BSH-1130) is provided to accept 1 1/8" (28mm) hoses.Special Instructions:- It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (682-ASY-0711) and half right wings (682-ASY-0712)- When installing on the Bourgault 3310 & 3320 shank use the top two notches of the shank. 1 1/2"3/4"Rear View Liquid PhosSIDE BANDSIDE BAND41www.tillagetools.com*May require adapter found in the Edge-on section on page 38, or refer to page 39 for more detailsPrecautions and Risk Factors. Refer to page 26. Multi-Shoot Openers - Advantage SeriesEDGE-ONSIDE BANDSIDE BANDDouble-Shoot LiquidSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The replaceable 3/4" Side Band tip is protected with a 3/4" carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). See Special Instructions below for installation information.Tube Size: The fertilizer is delivered through a 1/4" (6 mm) tube. The seed tube is 1-1/4" also a bushing (880-BSH-1130) is provided so a 1 1/8" (28mm) hoses can also be used. The liquid tube can be removed to switch to a granular system.Special Instructions: It is very important to install these openers with the wings pointing into the center of the machine. When ordering be sure to specify half left wings (682-ASY-0711L) and half right wings (682-ASY-0712L). When installing on the Bourgault 3310 & 3320 shank use the top two notches of the shank.1 1/2"3/4"SEEDFERTILIZER682-ASY-0712L (right) shown above682-ASY-0711L (left)Triple-Shoot Liquid Fertilizer With Liquid PhosphorusNote: All information from the opener directly above applies to this product as well.This opener was developed for producers that want the option to add liquid Phosphorus to the seed row. A 1/4" (6mm) stainless steel tube is welded to the back of the seed tube of the 682-ASY-0711L & 682-ASY-0712L openers. Precautions and Risk FactorsRefer to page 26 for more information on precautions and risk factors. Special Instructions: This opener has a removable liquid insert.Rear View Liquid Phos682-ASY-0712LP (right) shown above682-ASY-0711LP (left)42 BTTFor Fasteners. Refer to page 39. Seeding / Multi-Shoot OpenersEdge-On ShankBourgault PHD, Concord, MorrisFITSLIQUID PHOSPHORUSDouble-Shoot Liquid PhosphorusSeed & Fertilizer Placement: Liquid Phosphorus is delivered through a 1/4" (6 mm) stainless steel tube with the seed. Tip: This knife can be used with any Category 1 Replaceable Tips (tips sold separately) found on pages 16 - 17. 200-BNC-3100 should be used to install the Category 1 tips. Tube Size: The Fertilizer is delivered through a 1/4" (6 mm) tube. The seed tube is 1-1/4" a bushing (880-BSH-1130) is also provided so a 1 1/8" (28 mm) hoses can also be used.Special Instructions: This opener is designed to fit the Bourgault 3310 & 3320 (install on top two notches of the shank). This opener also fits the Morris and Concord Edge-On shanks. The Concord requires the 680-ACC-0001 spacer plate. 680-ASY-1000P43www.tillagetools.comPrecautions and Risk Factors. Refer to page 26. ASSEMBLY DRAWINGSAre you looking for specific parts or need to know how the openers are assembled?We have put together a extensive list of drawings and assembly tables to help you find what you are looking for. For instance, if you need to order individual parts you can refer to these drawings and order them through your local BTT dealer. Before placing an order of new openers always check the Assembly Drawings to make sure you have everything you need. Edge-On Assemblies located on pages 84 - 88. 84 * Identifies optional components not included in the assembly. Please order separately.BTT680-ASY-4026Advantage SeriesEdge-On Shank Liquid Fertilizer18 *479*365*NoTe 680-ACC-0001 is an optional spacer plate that is required for the Concord.680-ACC-0002 is a spacer that is required for a Bourgault 3310. & 3320 Optional components are not included in the assembly.2Edge-On AssembliesSingle-Shoot Front Delivery, Advantage Series and Titan Openers680-ASY-4020 Item# Part# 1 680-HLD-2000 2 610-TIP-4041 3 610-TUB-1001 4 880-BSH-1130 5 942-HRG-0754 6 906-NPT-2505 7 200-BNC-3100 8* 680-ACC-0001 9* 680-ACC-0003 Item# Part# 1 680-HLD-2000 2 610-TIP-4041 3 610-TUB-2526 4 880-BSH-1130 5 942-HRG-0754 6 906-NPT-2505 7 200-BNC-3100 8* 680-ACC-0001 9* 680-ACC-0002Advantage SeriesEdge-On Shank Granular Fertilizer78 *419*2436 5*NoTe: 680-ACC-0001 is an optional spacer plate that is required for the Concord. Not included in the assembly680-ACC-0003 is an optional spacer plate that is required for a Bourgault 3310 & 3320. Not included in assembly.GRANULARMulti-Shoot Openers - Advantage SeriesEDGE-ONSIDE BAND with welded tipSIDE BAND with welded tip682-ASY-2064 (right) shown above682-ASY-2063 (left)Double-Shoot LiquidSeed & Fertilizer Placement: Seed is placed down the center of the knife while the fertilizer is placed behind wing and to the side band. The wing of this knife protrudes out further than our other liquid knives and will provide increased separation of seed and fertilizer.Tip: The 3/4" welded tip has a primary carbide insert on the nose and a secondary insert to prevent the cast tip from wearing above the primary carbide. The wing on the side of the tip is also protected with carbide. This knife is manufactured with both left and right side wings. Please See Special Instructions below for more information on installation.Tube Size: The Seed is delivered through 1 1/4" (31mm) OD tubes. A bushing (880-BSH-1130) is provided to accept 1 1/8" (28mm) hoses. The liquid fertilizer is delivered through a 1/4" (6mm) OD tube. Special Instructions: It is very important to install these openers with the wings pointing into the center of the machine. When ordering be sure to specify half left wings (682-ASY-2063) and half right wings (682-ASY-2064) When installing on the Bourgault 3310 & 3320 Edge-On Shank always install on the top two notches of the shank. 682-ASY-2064P (right) shown above682-ASY-2063P (left)Triple-Shoot Liquid Fertilizer with Liquid PhosphorusThis opener was developed for producers that want the option to add liquid Phosphorus to the seed row. A 1/4" (6mm) stainless steel tube is welded to the back of the seed tube of the above opener.Precautions and Risk Factors Refer to page 26 for more information on precautions and risk factors. . 44 BTT Please Refer to the Assemblies Section (page 86)For Fasteners. Refer to page 39. Seeding / Multi-Shoot OpenersEdge-On ShankBourgault PHD, Concord, Morris FITSSIDE BAND with welded tip682-ASY-2064M (right) shown above682-ASY-2063M (left)Double-Shoot NH3 MaX-QuipThe 682-ASY-2063 and 682-ASY-2064 side band openers are outfitted with a Maxquip tube that is inserted into the 1/4" (6mm) OD stainless steel liquid tube.Precautions and Risk Factors Refer to page 26 for more information on precautions and risk factors. Rear View SIDE BAND with welded tip682-ASY-2064MP (right) shown above682-ASY-2063MP (left)Triple-Shoot NH3 MaX-Quip with Liquid PhosphorusFor added fertilizer applications, the 682-ASY-2063M and 682-ASY-2064M openers are fitted with a 1/4" (6mm) OD stainless steel tube that applies liquid Phosphorus down the center of the seed row.Precautions and Risk Factors Refer to page 26 for more information on precautions and risk factors. 45www.tillagetools.com*May require adapter found in the Edge-on section on page 38, or refer to page 39 for more detailsPrecautions and Risk Factors. Refer to page 26. Multi-Shoot Openers - Titan SeriesEDGE-ONGRANULAR628-ASY-5010 628-ASY-5015GRANULARPaired Row Granular Single Row Granular46 BTT Please Refer to the Assemblies Section (page 88)• The Titan's Paired-Row design places seed and fertilizer (Granular or NH3 - NH3 with attachment) in separate rows in a single-pass. Separation is both vertical and horizontal. Fertilizer is placed in a narrow band below and between the paired seed rows.• Narrow 1/2" wide fertilizer knife results in lower disturbance and more precise fertilizer placement than other paired-row designs, resulting in complete fertilizer/seed separation in most conditions• The modular design allows only the worn part to be replaced. Carbide is used on all main wear surfaces to prolong the life of your investment. For replacement parts see assembly page 88.Equipment Requirements• Seeding system must be set up to Double-Shoot seed and fertilizer in separate distribution• Shank trip initial tension of 450 lbs. or greater is required• On-row packing is recommended; minimum packer width should be 3-1/2"• The seed and granular tubes for these knives accept 1-1/8" - 1-1/4" hoses• Note: The Titan Series opener is not recommended with the Bourgault 3310 or 3320 Air Drill. Seeding / Multi-Shoot OpenersEdge-On ShankMorris & Concord FITS628-ASY-5020Paired Row NH347Paired Row NH3 MaX-Quip628-ASY-5020Mwww.tillagetools.comMay require adapter found in the Edge-on section on page 38, or refer to page 39 for more detailsNote: Titan Series openers are recommended on the Bourgault PHD Air Drills. Seed/Fertilizer Placement The Titan Series is unique in that it gives you the flexibility to choose your fertilizer depth. The tip can be adjusted to deliver fertilizer either as deep as 1 1/2" or, for less separation, 3/4". The choice is up to you. The diagram shown is typical of what has been observed in actual field trials with the Titan paired-row. Because soil and operating conditions can vary, exact placement may not be achieved in all situations.Third Party TestingIn the spring of 2005, PAMI was contracted to evaluate the Titan’s performance against a popular competitor’s paired-row opener. Separate plots of wheat and Canola were seeded with various applications of urea fertilizer ranging from 0 to 120 lbs per acre on 10? shank spacing. Following crop emergence, plant counts were done and recorded. The following conclusion was written:Based on limited field testing with canola and wheat it can be concluded that the agronomic performance of the Bourgault Tillage Tools prototype paired-row opener is equal to and slightly superior to the (competitor’s) paired-row opener.Rear View As the direct seeding industry evolves, unique shank styles are being developed by Air Drill Manufacturers. Bourgault Tillage Tools is dedicated to building openers that fit these new shanks. You can now be assured the quality you have come to trust in BTT openers will be available on your choice of Air Drills, no matter the color. 48 BTT· Ultra-Low Draft· No Seedbed Fracturing· Less Soil Disturbance· Carbide on Tip and Wings· Replaceable Tip· Virtually No Plugging· Smoother Field Finish· Even Germination· Seed & Fertilizer Separation1www.tillagetools.com"We made the switch to the side band openers two years ago and haven't looked back. We have been really impressed with the service that we received from BTT. They are determined to work with me and make the best possible opener for my machine." Reg and Deb Waldenberger - Hodgeville, SKSeeding / Multi-Shoot Openers49www.tillagetools.com"We made the decision to go with BTT openers on our Morris Contour after we heard how well their Advantage Series openers performed. We love the way these openers pull in the field and the finish is great, even in very wet conditions. I wouldn't go back to the factory openers." Devin Cranfield - Limerick, SKPlease Refer to the Assemblies Section (page 90)Double-Shoot GranularSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed and granular fertilizer are delivered through a 1 1/4” (31mm) OD tubes. When using 1 1/2" (38mm) hose to deliver fertilizer you will need to use 880-BSH-1150(sold separately). See page 79 for details. Double-Shoot LiquidSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed is delivered through a 1 1/4” (31mm) OD tubes. The 1/4" (6mm) Liquid insert is added to deliver liquid fertilizer. Morris Contour IPAIRED ROWPAIRED ROWSINGLE SHOOT683-KNH-1000 683-ASY-1000PTip: For single shooting, choose between a wide variety of tips (sold separately) see pages 16 - 17 for options ranging from 3/4" to 4". Tube Size: The seed tube accepts 1 1/4” (31 mm) OD. A 1/4”(6mm) tube can be added to deliver liquid Phosphorus. This product number is 683-ASY-1000P.683-ASY-4020G683-ASY-4020L50 BTTSeeding / Multi-Shoot OpenersSIDE BANDSIDE BANDINSTALLATIONDouble-Shoot GranularSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (683-ASY-0711) and half right wings (683-ASY-0712).Double-Shoot LiquidSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. The 1/4" liquid tube can be added to switch to a liquid system.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (683-ASY-0711) and half right wings (693-ASY-0712).683-ASY-0711G (Left) Shown Above 683-ASY-0712G (Right)683-ASY-0711L (Left) Shown Above 683-ASY-0712L (Right)Liquid Phosphorus openers available part #'s:683-ASY-0711GP , 683-ASY-0712GP51www.tillagetools.comLiquid Phosphorus openers available part #'s:683-ASY-0711LP , 683-ASY-0712LPUse the following fasteners: 1/2" x 2" Grade 8 Hex Bolt, 946-HRG-2005 1/2" Stover Lock Nut, 906-NPT-5005Remember when installing Side Band openers always install wings directed towards the center of the machine. The following instructions are intended to help with installation: For a full breakdown of Assemblies see page 9052 BTTDouble-Shoot GranularSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed and granular fertilizer are delivered through a 1 1/4” (31mm) OD tubes. Liquid insert can be added to deliver liquid fertilizer.When using 1 1/2" (38mm) hose to deliver fertilizer you will need to use 880-BSH-1150(sold separately). See page 79 for details. Double-Shoot LiquidSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed is delivered through a 1 1/4” (31mm) OD tubes. The 1/4" (6mm) Liquid insert is added to deliver liquid fertilizer. Morris Contour IIPAIRED ROWPAIRED ROWSINGLE SHOOT693-KNH-1000 693-ASY-1000PTip: For single shooting, choose between a wide variety of tips (sold separately) see pages 16 - 17 for options ranging from 3/4" to 4". Tube Size: The seed tube accepts 1 1/4” (31mm) OD. A 1/4”(6mm) tube can be added to d liver liquid Phosphorus. This product number is 693-ASY-1000P.693-ASY-4020G693-ASY-4020LPlease Refer to the Assemblies Section (page 91)Seeding / Multi-Shoot Openers53www.tillagetools.comSIDE BANDSIDE BANDINSTALLATIONDouble-Shoot GranularSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. Liquid insert can be added to deliver liquid fertilizer.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (693-ASY-0711) and half right wings (693-ASY-0712).Double-Shoot LiquidSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. The 1/4" liquid tube can be added to switch to a liquid system.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (693-ASY-0711) and half right wings (693-ASY-0712).693-ASY-0711G (Left) Shown Above 693-ASY-0712G (Right)693-ASY-0711L (Left) Shown Above 693-ASY-0712L (Right)Liquid Phosphorus openers available part #'s:693-ASY-0711GP , 693-ASY-0712GPLiquid Phosphorus openers available part #'s:693-ASY-0711LP , 693-ASY-0712LPUse the following fasteners: 1/2" x 2" Grade 8 Hex Bolt, 946-HRG-2005 1/2" Stover Lock Nut, 906-NPT-5005Remember when installing Side Band openers always install wings directed toward the center of the machine. The following instructions are intended to help with installation: For a full breakdown of Assemblies see page 91Case IH 700, New Holland P2060 and Flexi-Coil PH550054 BTT Please Refer to the Assemblies Section (page 92)Double-Shoot GranularSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed and granular fertilizer are delivered through a 1 1/4” (31mm) OD tubes. Liquid insert can be added to deliver liquid fertilizer. Double-Shoot LiquidSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed is delivered through a 1 1/4” (31mm) OD tubes. The 1/4" (6mm) Liquid insert is added to deliver liquid fertilizer. PAIRED ROWPAIRED ROWSINGLE SHOOT694-KNH-1000 694-ASY-1000PTip: For single shooting, choose between a wide variety of tips (sold separately) see pages 16 - 17 for options ranging from 3/4" to 4". Tube Size: The seed tube accepts 1 1/4” (31 mm) OD. A 1/4”(6mm) tube can be added to deliver liquid Phosphorus. This product number is 694-ASY-1000P.694-ASY-4020G694-ASY-4020LSeeding / Multi-Shoot Openers55www.tillagetools.comPlease Refer to the Assemblies Section (page 92)SIDE BANDSIDE BANDINSTALLATIONDouble-Shoot GranularSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. Liquid insert can be added to deliver liquid fertilizer.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (694-ASY-0711) and half right wings (694-ASY-0712).Double-Shoot LiquidSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. The 1/4" liquid tube can be added to switch to a liquid system.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (694-ASY-0711) and half right wings (694-ASY-0712).694-ASY-0711G (Left) Shown Above 694-ASY-0712G (Right)694-ASY-0711L (Left) Shown Above 694-ASY-0712L (Right)Liquid Phosphorus openers available part #'s:694-ASY-0711GP , 694-ASY-0712GPLiquid Phosphorus openers available part #'s:694-ASY-0711LP , 694-ASY-0712LPUse the following fasteners: 1/2" x 2" Grade 8 Hex Bolt, 946-HRG-2005 1/2" Stover Lock Nut, 906-NPT-5005Remember when installing Side Band openers always install wings directed towards the center of the machine. The following instructions are intended to help with installation: For a full breakdown of Assemblies see page 9256 BTTCase IH 800, New Holland P2070 and Flexi-Coil PH5700 (Australia)Double-Shoot GranularSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed and granular fertilizer are delivered through a 1 1/4” (31mm) OD tubes. The 1/4" (6mm) Liquid insert can be added to deliver liquid fertilizer. Double-Shoot LiquidSeed & Fertilizer: The seed is delivered in two distinct rows while the fertilizer is placed in the center. Both seed and fertilizer are placed on the same level. The unique tip design leaves the seed bed unfractured with ultra-low draft and smoother field finish. Tip: Comes with a 4" Advantage Series replaceable tip (610-TIP-4041). The nose and underside are protected with carbide.Tube Size: The seed is delivered through a 1 1/4” (31mm) OD tubes. The 1/4" (6mm) Liquid insert is added to deliver liquid fertilizer. PAIRED ROWPAIRED ROWSINGLE SHOOT684-KNH-1000 684-ASY-1000PTip: For single shooting, choose between a wide variety of tips (sold separately) see pages 16 - 17 for options ranging from 3/4" to 4". Tube Size: The seed tube accepts 1 1/4” (31 mm) OD and hos-es. A 1/4”(6mm) tube can be added to deliver liquid Phospho-rus. This product number is 684-ASY-1000P.684-ASY-4020G684-ASY-4020LPlease Refer to the Assemblies Section (page 93)Seeding / Multi-Shoot Openers57www.tillagetools.comSIDE BANDSIDE BANDINSTALLATIONDouble-Shoot GranularSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (684-ASY-0711) and half right wings (684-ASY-0712).Double-Shoot LiquidSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes. The 1/4" liquid tube can be added to switch to a liquid system.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (684-ASY-0711) and half right wings (684-ASY-0712).684-ASY-0711G (Left) Shown Above 684-ASY-0712G (Right)684-ASY-0711L (Left) Shown Above 684-ASY-0712L (Right)Liquid Phosphorus openers available part #'s:684-ASY-0711GP , 684-ASY-0712GPLiquid Phosphorus openers available part #'s:684-ASY-0711LP , 684-ASY-0712LPUse the following fasteners: 1/2" x 2" Grade 8 Hex Bolt, 946-HRG-2005 1/2" Stover Lock Nut, 906-NPT-5005Remember when installing Side Band openers always install wings directed towards the center of the machine. The following instructions are intended to help with installation: For a full breakdown of Assemblies see page 9358 BTTSeed HawkSIDE BANDSIDE BANDDouble-Shoot GranularSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Both fertilizer and seed are delivered through a 1 1/4” (31mm) OD tubes.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (686-ASY-0711G) and half right wings (686-ASY-0712G).Double-Shoot LiquidSeed & Fertilizer: The seed is placed directly behind the tip in the middle of the row. Fertilizer is placed in a band to the side and behind the wing.Tip: The 3/4” replaceable Side Band tip is protected with a carbide insert. The wing is also protected with carbide. Tips come in either left hand (612-TIP-0711) or right hand (612-TIP-0712). Tube Size: Seed is delivered through a 1 1/4” (31mm) OD tube. A 1/4" liquid tube is added to adapt to a liquid fertilizer system.Special Instructions: It is very important to install these openers with the wings pointing in to the center of the machine. When ordering be sure to specify half left wings (686-ASY-0711L) and half right wings (686-ASY-0712L).686-ASY-0711G (Left) Shown 686-ASY-0712G (Right)686-ASY-0711L (Left) Shown 686-ASY-0712L (Right)Any of our Seed Hawk openers can also come with a 1/4" Liquid Phosphorus line option. If you have any questions about Liquid Phosphorus system, please see your local dealer. The following product numbers correspond with the product numbers above please order accord-ingly: 686-ASY-0711GP and 686-ASY-0712GP - Granular Side Band with Liquid Phos tube686-ASY-0711LP , 686-ASY-0712LP - Liquid Side Band with Liquid Phos tubePlease Refer to the Assemblies Section (page 89)Seeding / Multi-Shoot Openers59www.tillagetools.comWHY SHOULD YOU MAKE THE SWITCH?INSTALLATIONUse the following fasteners: 1/2" x 2" Grade 8 Hex Bolt, 946-HRG-2005 1/2" Stover Lock Nut, 906-NPT-5005Remember when installing Side Band openers always install wings directed towards the center of the machine. The following instructions are intended to help with installation: For a full breakdown of Assembly see page 89There are producers that feel the two-shank system doesn’t work best for their conditions. Stubble plugging, excessive soil fracturing and poor field finish are some of the comments that we have heard. Our specifically designed openers allow producers to remove the rear shank completely and deliver both seed and fertilizer down the same opener. Now you can have all the benefits of the Seed Hawk machine with the quality that comes with Bourgault Tillage Tools Advantage Series Openers and the ability to get the job done with half as many shanks. In order to properly install the 686 opener on your Seed Hawk shank you must first remove the rear fertilizer shank. Our opener is then installed on the front shank. Seed Boots60The quick change seed boot system consists of two parts: the seed boot holder which bolts on to the back of the shank and the seed boot attachment which fits into the holder and is secured with a bolt and nut (300-BNC-4414). There are six different interchangeable attachments to choose from each giving a different seed spread pattern. This system allows you to match your seed spread to the width of opener you are using; it is perfect for producers who want to switch back and forth from a wide seed spread behind a sweep to a narrow seed band behind a knife. For knives that fit this system see pages 24 - 25.There are four different holders available to fit different types of shanks. Each of these holders can be used with any of the attachments. These holders are designed to accept 1-1/8" (28 mm) O.D. air hose. For 1-1/4" (31 mm) O.D. air hose a bushing 300-BSH-1200 must be used. A self-tapping screw 911-SCR-1051 should be used to hold the air hose or the bushing into the seed boot holder. A 3/8" (9 mm) screw 911-SCR-1038 is also available to secure the air hose into the top of the bushing.300-HLD-4700This holder has 1-3/4" (45 mm) bolt hole spacing. The bolt hole section is designed flat to fit the Bourgault and Ezee-On 47 degree shanks.300-HLD-4710This holder has 1-3/4" (45 mm) bolt hole spacing. The bolt hole section is curved to fit all 47 degree shanks, except the Bourgault and Ezee-On.300-HLD-5000This holder has 2-1/4" (57 mm) bolt hole spacing. The bolt hole section is flat and has two sets of holes. The top set of holes should be used in almost all cases when mounting this holder to the shank. It fits on the Bourgault chisel plow shanks as well as the LH 755 shank used on the Morris Magnum III and the Morris Concept 2000.300-HLD-5010This holder has 2-1/4" (57 mm) bolt hole spacing. The bolt hole section is curved in order to fit any chisel plow shank other than the Bourgault and the Morris LH 755 shank.BTT Refer to pages 22 - 25 for knives that work with this system61www.tillagetools.comThis knife attachment will place the seed in a very narrow band. It is designed to be used behind the 200-VRT-1000, 410-VRT-1000, 410-KNF-0800 and the 410-KNF-0801.300-ATM-1031Seed Boot attachmentsThis spreader attachment will distribute the seed evenly in a 3 to 4 inch (76 mm to 100 mm) band. Seed spread may vary depending on sweep size, soil type and fan speed.300-ATM-1000The splitter attachment will place the seed into two distinct rows approximately 6 inches (150 mm) apart. Seed spread may vary depending on sweep size, soil type and fan speed.300-ATM-1010 300-ATM-1020The straight attachment will spread the seed approximately 2-1/2 inches (63 mm). It works well with the quick change spoons, spikes or any size of sweep.300-ATM-1006The spreader attachment will distribute the seed evenly in a 6 inch (152 mm) row. Seed spread may vary depending on sweep size, soil type and fan speed. Works well for Organic operations.300-ATM-1035This knife attachment will place the seed in a very narrow band. It is designed to be used behind the 200-KNF-0810, 200-KNF-0811, 200-KNF-0813 and 200-KNH-4000.*Available in North America by special order only.300-ATM-1036*This knife attachment will place the seed in a band.There is hardfacing on the side and the slot is wider than the 300-ATM-1035. It is designed to be used behind the 200-KNF-0815.300-BNC-4414This is the bolt and nut that secures the quick change seed boot attachments into the holders..300-BLT-4414600-NUT-3754Quick ChangeSeed BootsSeed Boots62300-SDS-4755This Double-Shoot Paired-Row Granular seed boot is designed to maintain seed/fertilizer separation. The fertilizer drops straight down which minimizes "bounce" while the seed is propelled forward and out which minimizes the possibility of seed/fertilizer contact.This product can be used on any C-shank. It has a slotted top hole that allows the boot to fit 1 3/4" to 2 1/4" (45 mm to 57 mm) bolt spacing. This seed boot is designed to use behind sweeps (minimum 7"). It accepts 1 1/4" (31mm) O.D. hose.300-SQR-1500The square tube seed boot has a slotted top hole to fit 1-3/4" to 2-1/4" (45 to 57 mm) bolt spacing. It can be used on any C-shank except the Bourgault 47 degree. This seed boot was designed to be used with any of the funnel knives. It accepts 1-1/4" (32 mm) O.D. air hose.Seed BootsBTTseedfertilizerseedSeed BootsBolts are installed through the front of the adapterThe top nut is placed between the shank and the Seed BootThe bottom bolt is placed in the rear of the Seed Boot, fastening the Seed Boot to the shankSpecial Instructions:Refer to pages 98 - 100 for specific bolt length instructions. Lengths may vary depending on the thickness of shank. Torque bolts to 100 ft/lbs, refer to page 101 for torque values. 63www.tillagetools.com64www.tillagetools.com1www.tillagetools.com64 BTT64www.tillagetools.comFertilizer Knives65www.tillagetools.comFertilizer KnivesFertilizer Knives66 BTTFITS: 200 Series Speed-LocTM This NH3 knife holder can be equipped with any of the Category 1 Replaceable Tips (tips sold separately) found on pages 16 - 17. The tips are held on with bolt and nut 200-BNC-3100. The NH3 tube is 1/2" (12 mm) O.D. and is designed to work with cold-flow anhydrous kits. The appropriate driver should be used to protect the tip when installing this opener on the quick change adapter.200-KNH-4020 pictured with 200-TIP-0801 (tip sold separately).Not Recommended in rocky areas or highly abrasive soils200-KNH-4020FITS: 200 Series Speed-LocTM 200-KNF-7521 and 200-KNF-7520The 200-KNF-7521 has a 3/4" welded tip knife with a carbide insert for prolonged wear life. The carbide also keeps the tip sharp for good penetration, even in hard compacted soils. The NH3 tube is 1/2" (12 mm) O.D. and is designed to work with cold-flow anhydrous kits. This knife can be purchased with a regular chrome tip (200-KNF-7520). Replacement weld-on tips are available: chrome tip 100-TIP-7500 and carbide tip 200-TIP-7501. See page 94 for information on replacement tips and welding instructions. A driver (100-DRV-1010) should be used to prevent damage to the tip when installing this knife on the adapter. This product is also available with a 3/8 inch (9 mm) O.D. tube for use with hot gas anhydrous kits. Part numbers for these knives are 200-KNF-7530 (chrome tip) and 200-KNF-7531 (carbide tip).FITS: 200 Series Speed-LocTM 200-KNF-7525 and 200-KNF-7524The 200-KNF-7525 has a 3/4" welded carbide tip. The tube on this knife is longer and extends back further than the tube on the 200-KNF-7521. The extended tube allows this knife to be used on air seeders or air drills that have seed boots on the back of the shanks. The tube is 1/2" (12 mm) O.D. and is designed to work with cold-flow anhydrous kits. This knife can be purchased with a regular chrome tip (200-KNF-7524). Replacement weld-on tips are available: chrome tip 100-TIP-7500 and carbide tip 200-TIP-7501. See page 94 for information on replacement tips and welding instructions. A driver (100-DRV-1010) should be used to prevent damage to the tip when installing these knives on the adapter.FITS: 47 and 50 degree Bolt Hole Sp. - 1-3/4" - 2-1/4" (44-57 mm) 050-KNH-0820This cast bolt-on knife holder is designed to fit on either a 47 degree or a 50 degree shank. With a slotted top hole the bolt hole spacing ranges from 1-3/4" (45 mm) to 2-1/4" (57 mm). This opener can be used with any of the Category 1 Replaceable Tips (tips sold separately) on pages 16 - 17. The tips are held on with bolt and nut 200-BNC-3100. The 1/2" (12 mm) O.D. NH3 tube is designed to work with cold-flow anhydrous kits.050-KNH-0820 pictured with 200-TIP-0801 (tip sold separately)Not Recommended in rocky areas or highly abrasive soils.Fertilizer Knives67www.tillagetools.comFertilizer KnivesAll NH3 knives can be converted to MaxQuip upon request.410-KNF-7551This knife has a 3/4" (19 mm) carbide tip, a 1/2" (12 mm) O.D. NH3 tube as well as a larger tube for granular fertilizer. Part 410-TIP-0801 is the replacement tip. See page 94 for tip removal and welding instructions. Driver 400-DRV-1010 should be used to protect the tip when installing this knife on the adapter. It is designed to work with cold-flow anhydrous kits. It bands NH3 and dry fertilizer in the same row. The fertilizer tube for this knife accepts 1-1/4" (31 mm) O.D. and 1-1/8" (28 mm) O.D. air hose.This product is also available with a 3/8 inch (9 mm) O.D. tube for use with hot gas anhydrous kits. The part number of this option is 410-KNF-7553 Not recommended for seeding.FITS: 47 and 50 degree600-KNH-7540599-KNH-7540FITS: 410 Series Speed-LocTM410-KNF-0825 and 410-KNF-0824The 410-KNF-0825 has a 3/4" (19 mm) carbide tip. The NH3 tube is 1/2" (12 mm) O.D. and is designed to work with cold-flow anhydrous kits. This knife can be purchased with a regular chrome tip (410-KNF-0824).Replacement weld-on tips are available: chrome tip 410-TIP-0800 and carbide tip 410-TIP-0801. See page 94 for tip removal and welding instructions. A driver (400-DRV-1010) should be used to prevent damage to the tip when installing this knife on the adapter. This product is also available with a 3/8 inch (9 mm) O.D. tube for use with hot gas anhydrous kits. Part numbers for these knives are 410-KNF-0830 (chrome tip) and 410-KNF-0831 (carbide tip).FITS: 410 Series Speed-LocTMFertilizer is delivered through a 1-1/4” (31 mm) OD or a 1-1/8” (28 mm) OD air hose. An insert, 880-BSH-1130 is included for use with the 1-1/8” air hose. This knife can be used with either 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold separately) found on page 69. Both of these tip are 3/4” (19 mm) wide. The tips are held on with a bolt and nut combination, part number 600-BNC-5000. The top hole is slotted to fit a 1-3/4” or a 2-1/2” (57 or 63 mm) bolt hole spacing. It can be used on a 43° shank with the addition of a 7° wedge, 400-WDG-0700. Fertilizer is delivered through a 1-1/4” (31 mm) OD or a 1-1/8” (28 mm) OD air hose. An insert, 880-BSH-1130 is included for use with the 1-1/8” air hose. This opener works best with the Bourgault shank. This knife can be used with either 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip (tips sold separately) found on page 69. Both of these tip are 3/4” (19 mm) wide. The tips are held on with a bolt and nut 600-BNC-5000. This cast bolt-on knife holder is designed to fit on a 47° shank with 1-3/4” (45 mm) bolt hole spacing. FITS: 47 and 50 degreeFertilizer Knives68 BTT47* and 50 degree Bolt Hole Sp. - 1-3/4" - 2-1/2" (44-63 mm)47* and 50 degree Bolt Hole Sp. - 1-3/4" - 2-1/2" (44-63 mm)47 and 50 degree Bolt Hole Sp. - 1-3/4" - 2-1/2" (44-63 mm)This bolt-on NH3 knife holder can be equipped with either the 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip. These 3/4" (19 mm) tips are held on to the holder with a bolt and nut (600-BNC-5000). The NH3 tube is 1/2" (12 mm) O.D. and is designed to work with cold-flow anhydrous kits. *A 7 degree wedge must be used when installing this knife on a 43 degree shank.This bolt-on NH3 knife holder can be equipped with either the 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip. These 3/4" (19 mm) tips are held on to the holder with a bolt and nut (600-BNC-5000). The NH3 tube is 3/8" (9 mm) O.D. and is designed to work with hot gas anhydrous kits. *A 7 degree wedge must be used when installing this knife on a 43 degree shank.This bolt-on NH3 knife holder can be equipped with either the 600-TIP-7500 chrome tip or the 600-TIP-7501 carbide tip. These 3/4" (19 mm) tips are held on to the holder with a bolt and nut (600-BNC-5000). This knife has a 1/2" (12 mm) O.D. NH3 tube as well as a larger tube for granular fertilizer. It is designed to band NH3 and dry fertilizer in the same row.The fertilizer tube for this knife accepts 1-1/4" (31 mm) O.D. and 1-1/8" (28 mm) O.D. air hose. A 7 degree wedge must be used when installing this knife on a 43 degree shank.Not recommended for seeding.600-BNC-5000This bolt and nut is used to hold the 600 series tips onto the 599 and 600 series knife holders. It is recommended that this bolt and nut be changed when replacing tips in order to maintain the locking ability of the nut.600-BLT-5004600-NUT-3754600-HHA-0750Keep your NH3 hose behind the shank with this stainless steel hose holder. This hose holder can be mounted on any C-shank and is completely height adjustable.600-KNH-7552600-KNH-7530600-KNH-7520Fertilizer Knives69www.tillagetools.comAll NH3 knives can be converted to MaxQuip upon request.This 3/4" (19 mm) chrome tip fits all the 599 and 600 series knife holders except the 600-KNH-7561 and 600-KNH-7562. It is secured to the holder with a bolt and nut (600-BNC-5000).This 3/4" (19 mm) carbide tip fits all the 599 and 600 series knife holders except the 600-KNH-7561 and 600-KNH-7562. It is secured to the holder with a bolt and nut (600-BNC-5000).Mid Row Shank FertilizerFits: Bourgault 3310 & 3320 PHDThis system is designed to work on the Bourgault 3310 & 3320 Mid-Row Shank. The 6 knives all use the same base holder, 680-HLD-1000 and 3/4" tip, 200-TIP-0801. The knife is then fitted with a tube to deliver any one of the following fertilizers: granular, liquid, NH3 or NH3 Maxquip. 685-ASY-1801GM and 685-ASY-1801GN give you the flexibility to switch between products or place both products down at the same time. For proper penetration these openers need to be installed on the top two holes of the shank. These openers can be equipped with any of the Category 1 Replaceable Tips (tips sold separately) found on pages 16 - 17.600-TIP-7501This 3/4" (19mm) carbide tip fits 600-KNH-7562. It's carbide protected wart allows for vertical and horizontal separation while double-shooting liquid. 600-TIP-7507 675-ASY-1801GM & 675-ASY-1801GN600-TIP-7500The granular tube accepts 1-1/4” (31 mm) OD and 1-1/8” (28 mm) OD tube and an insert, 880-BSH-1130, is included for use with the 1-1/8” hose. The opener can be used with any Category 1 Replaceable Tip (tips sold separately), listed on pages 16 - 17.For Wedge instructions see Accessories page 78.70www.tillagetools.com1www.tillagetools.com70 BTTWhat’s in a sweep?Most sweeps on the market today are made with very comparable material. If the material used doesn't set the sweep apart then what makes the difference in the life and quality of a sweep? Precise Heat Treatment All Bourgault Tillage Tools sweeps are formed from Boron Steel and are heat treated in a closely monitored process that ensures a consistent and uniform microstructure and hardness. A recent metallurgical test confirmed that our sweeps have a fully tempered Martensitic Microstructure. This means our sweeps have been heat treated to obtain the maximum combination of wear resistance and durability. Long Lasting Design Our Parallel Wing design means the sweep will maintain its original width throughout the sweep’s entire wear life. The superior Crown Design ensures the nose stays sharp as the sweep wears. This is important for good penetration in tough conditions.Consistent Quality BTT has always been dedicated to providing top quality in all of the products it manufacturers. Our rigorous Quality Assurance procedures ensure every sweep you purchase is held to the highest standards and will always fit or your money back. Innovative Speed Loc The patented Speed-LocTM system is one of the most innovative products on the market. With the upper stop and pin design you can rest assured your sweeps will stay at a consistent depth and stay on the shank. The narrow stem on these sweeps throws less soil and leaves a smoother field finish than conventional bolt-on sweeps. Our “quick change” sweeps save you time and money in the field 70www.tillagetools.comTillage Sweeps, Spikes & ChiselsTillage71www.tillagetools.comSweeps and SpikesTillage72 BTTAvailable in North America by special order only.200 Series Sweeps*Size Thickness Product #4"(100mm) 1/4"(6mm) 200-PWV-04005"(140mm) 1/4"(6mm) 200-PWV-05005"(140mm) 5/16"(8mm) 200-PWV-05087"(180mm) 1/4"(6mm) 200-PWV-07007"(180mm) 5/16"(8mm) 200-PWV-07089"(230mm) 1/4"(6mm) 200-PWV-09009"(230mm) 5/16"(8mm) 200-PWV-090810"(254mm) 1/4"(6mm) 200-PWV-100010"(254mm) 5/16"(8mm) 200-PWV-100811"(280mm) 1/4"(6mm) 200-PWV-110011"(280mm) 5/16"(8mm) 200-PWV-110812"(305mm) 1/4"(6mm) 200-PWV-120012"(305mm) 5/16"(8mm) 200-PWV-120813"(330mm) 1/4"(6mm) 200-PWV-130013"(330mm) 5/16"(8mm) 200-PWV-130814"(355mm) 1/4"(6mm) 200-PWV-140014"(355mm) 5/16"(8mm) 200-PWV-140816"(406mm) 5/16"(8mm) 200-PWV-1608*18"(457mm) 5/16"(8mm) 200-PWV-1808*This sweep is only available in 5/16" (8 mm) thickness and was developed for Western Europe. It is not recommended for most North American field conditions.4"7"10"12"14"5"9"11"13"16"200 Series Sweeps and Spikes 7373www.tillagetools.comAvailable in North America by special order only.200-PWV-04051/4" (6 mm) thick x 4" (100 mm) wideThis sweep is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases the life expectancy. The nose on this sweep runs 1/2" (12 mm) lower than the other 200 series sweeps. This increased pitch improves penetration in hard or compacted ground.200-PWV-0428*5/16" (8 mm) thick x 4" (100 mm) wideThis sweep is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases its life expectancy. 200-PWV-0738*5/16" (8 mm) thick x 4" (100 mm) wide4" wide extended wear pad.200-PWV-0928*5/16" (8 mm) thick x 9" (230 mm) wideWear pad extends up the entire stem.200 Series Spikes200-GFO-0308This “Goosefoot” tillage tool is 5/16" (8 mm) thick and 2-1/2" (63 mm) wide. It is designed specifically for vibrating S-tine cultivators.200-SPK-0200Quick change spike - 5/8" (15 mm) thick 2-1/4" (57 mm) wide and 6" (150 mm) long. It has a hardened wear pad (52-56 HRC) for extra life. This tool is ideal for primary tillage or banding fertilizer.200-SPK-0230Quick change spike - 5/8" (15 mm) thick, 2" (50 mm) wide and 4" (102 mm) long. It has a hardened wear pad (52-56 HRC) for extra life.This tool is made specifically for slurry injection.Sweeps with a Hardened Wear Pad200-PWV-0528*5/16" (8 mm) thick x 5" (127 mm) wideThis sweep is designed mainly for fall tillage or deep working. It has a hardened wear pad (52-56 HRC) which increases its life expectancy. 200-SPK-0215This quick change spike is 5/8" (15 mm) thick, 2-1/4" (57 mm) wide and 6" (150 mm) long. It has a hardened wear pad (52-56 HRC) that extends to the top of the stem to prevent wear in abrasive soil or when working at greater depths.Available in North America by special order only.*2-1/2" (63 mm) 2-1/4" (57 mm) 2-1/4" (57 mm) 2" (50 mm)4" (100 mm) 4" (100 mm) 5" (127 mm) 4" (100 mm) 9" (230 mm)TillageTillage74 BTTSweeps and Spikes410 Series SweepsSize Thickness Product #4"(100mm) 1/4"(6mm) 410-PWV-04006"(150mm) 1/4"(6mm) 410-PWV-06006"(150mm) 5/16"(8mm) 410-PWV-06088"(200mm) 1/4"(6mm) 410-PWV-08008"(200mm) 5/16"(8mm) 410-PWV-080810"(254mm) 1/4"(6mm) 410-PWV-100010"(254mm) 5/16"(8mm) 410-PWV-100812"(305mm) 1/4"(6mm) 410-PWV-120012"(305mm) 5/16"(8mm) 410-PWV-120814"(355mm) 1/4"(6mm) 410-PWV-140014"(355mm) 5/16"(8mm) 410-PWV-140816"(406mm) 1/4"(6mm) 410-PWV-160016"(406mm) 5/16"(8mm) 410-PWV-160818"(457mm) 1/4"(6mm) 410-PWV-180018"(457mm) 5/16"(8mm) 410-PWV-18084"8"12"16"6"10"14"18"75www.tillagetools.comTillage410 Series Sweeps and Spikes Speed-Loc™ REBATE Bring any 100 Series or Competitor's adapters in to your local dealer and receive a $7.00 cash rebate when you purchase a set of 200 Series adapters. For a limited time only. Check with your local dealer for details.Our Speed-LocTM adapters fit more than 60 makes of Cultivators, Chisel Plows and Air Seeders. The chances are we have an adapter that is right for you. Refer to our Speed-LocTM adapter chart on pages 96 - 97. If you can't find your make and model contact us or visit an authorized BTT dealers. For a complete list of bolt lengths see pages 98 - 100Sweeps with Hardened Wear Pad410-PWV-04185/16" (8 mm) thick x 4" (100 mm) wide. This sweep has a 3/8" hardened wear pad (52-56 HRC) for longer life. This sweep runs at 13 degree pitch, which is steeper than the regular 410 sweep. 4" (100 mm) 5" (140 mm)410-PWV-0518(not pictured) 5/16" (8 mm) thick x 5" (140 mm) wide. with 3" wear pad. Sweep runs at 3 deg. same as a standard sweep. 410-SPK-0200410 Series SpikeThis heavy duty quick change spike is 2 inches (50 mm) wide, 5/8 inch (15 mm) thick and 9 inches (230 mm) long. It has a hardened wear pad (52-56 HRC) for long life. This tool works well for primary tillage or for banding fertilizer.2" (50 mm)76TillageBTTSweeps and SpikesBolt-On SweepsOur bolt-on sweeps fit all makes and models of tillage equipment.The Extended Stem Advantage.The stem or neck on our bolt-on sweeps is longer than that of our competitors. This extended stem allows us to punch the bolt holes higher than on any other brand of sweeps. This reduces stem breaking and also results in less wear on the shank and less wear and stone damage to the bottom bolt. Less wear on the shank extends the useful life of the sweep and less stone damage on the bottom bolt means fewer problems when changing shovels. The extended stem feature saves customers time and money.For heavy duty chisel plows with 43 degree shanks and 2-1/4" to 2-1/2" (57 mm - 64 mm) hole centers.043-PWV-0800 1/4" (6 mm) thick x 8" (200 mm) wide.043-PWV-1000 1/4" (6 mm) thick x 10" (254 mm) wide.043-PWV-1200 1/4" (6 mm) thick x 12" (305 mm) wide.043-PWV-1400 1/4" (6 mm) thick x 14" (355 mm) wide.043-PWV-1600 1/4" (6 mm) thick x 16" (420 mm) wide.043-PWV-1800 1/4" (6 mm) thick x 18" (460 mm) wide.043 Series bolt-on sweeps047 Series bolt-on sweepsFor field cultivators with 47 degree shanks and 1-3/4" (45 mm) hole centers.047-PWV-0400 1/4" (6 mm) thick x 4" (100 mm) wide.047-PWV-0900 1/4" (6 mm) thick x 9" (230 mm) wide.047-PWV-1000 1/4" (6 mm) thick x 10" (254 mm) wide.047-PWV-1100 1/4" (6 mm) thick x 11" (280 mm) wide.047-PWV-1200 1/4" (6 mm) thick x 12" (305 mm) wide.047-PWV-1300 1/4" (6 mm) thick x 13" (330 mm) wide.For heavy duty chisel plows with 50 degree shanks and 2-1/4" (57 mm) hole centers.050-PWV-0600 1/4" (6 mm) thick x 6" (150 mm) wide.050-PWV-0800 1/4" (6 mm) thick x 8" (200 mm) wide.050-PWV-1000 1/4" (6 mm) thick x 10" (254 mm) wide.050-PWV-1200 1/4" (6 mm) thick x 12" (305 mm) wide.050 Series bolt-on sweeps050-PWV-1400 1/4" (6 mm) thick x 14" (355 mm) wide.050-PWV-1600 1/4" (6 mm) thick x 16" (420 mm) wide.050-PWV-1800 1/4" (6 mm) thick x 18" (460 mm) wide.77www.tillagetools.com070-RSP-0200AThis reversible spike is 2" (50 mm) wide, 5/8" (16 mm) thick and 14" (355 mm) long. It has 1-3/4" to 2-1/2" (45 to 57 mm) bolt hole spacing. This spike is shorter than our other two reversible spikes and is designed for light to medium duty field cultivators or for chisel plows where ground clearance in transport is a concern.TillageBolt-On Sweeps and Spikes 070-RSP-0210AThis reversible spike is 2" (50 mm) wide, 5/8" (16 mm) thick and 17" (431 mm) long. It has 2-1/4" (57 mm) bolt hole spacing. This spike is flat through the bolt hole section, it is designed specifically to fit the Bourgault chisel plow as well as the Morris LH 755 shank.070-RSP-0220AThis reversible spike is 2" (50 mm) wide, 5/8" (16 mm) thick and 16-1/2" (419 mm) long. It has 2-1/4" to 2-1/2" (57 to 63 mm) bolt hole spacing. This spike is curved at the bolt hole section and can be used on any chisel plow shank except the Bourgault and Morris LH 755 shank.070-RCH-0451This reversible chisel is 5/16" (8 mm) thick and 4" (100 mm) wide. It has 1-3/4" (45 mm) bolt hole spacing to fit light and medium duty field cultivators. This tool is used mostly for primary tillage in the fall or early spring.070-RCH-0452This reversible chisel is 5/16" (8 mm) thick and 4" (100 mm) wide. It has 2-1/4" to 2-1/2" (57 to 63 mm) bolt hole spacing. This tool is used mostly for primary tillage in the fall or early spring.200-DRV-1030This driver should be used when installing the following openers: 200-KNF-0505, 200-VRT-1000, 200-VRT-1011, 200-VRT-1016, 200-VRT-1061 & 410-VRT-1000. It should also be used when installing knives with the following tips: 200-TIP-0503, 200-TIP-0507, 200-TIP-0523, 200-TIP-0524, 200-TIP-0531 & 200-TIP-1011.AccessoriesQuick Change AccessoriesAdditional Accessories100-WDG-0700This 7 degree urethane wedge is designed to correct the pitch of the 100-QCA-5010 and the 200-QCA-5010 adapters on 43 degree shanks.200-WDG-0206This 2 degree urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.200-WDG-0506This 5 degree urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.200-WDG-1000 200-WDG-1006This 10 degree urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.This 10 degree urethane wedge has 45 mm to 80 mm bolt hole spacing. It is used to obtain proper sweep pitch on certain shanks.400-WDG-0300This 3 degree urethane wedge is designed to correct the pitch of the 410-QCA-5010 adapter on a 47 degree chisel plow shank. It may also be required on the John Deere 685, 1810, 1820, and 2400 chisel plows in order to achieve proper sweep pitch.400-WDG-0700This 7 degree urethane wedge is designed to correct the pitch of the 410-QCA-5010 adapter when installing on a 43 degree shank. It should also be used with the 600 series knives when installing on a 43 degree shank.100-DRV-1010This driver should be used for installing the following knives: 200-KNF-0861, 200-KNF-0863, 200-KNF-7510, 200-KNF-7511, 200-KNF-7518, 200-KNF-7542, 200-KNF-7520, 200-KNF-7521, 200-KNF-7524, 200-KNF-7525, 200-KNF-7530 & 200-KNF-7531.100-DRV-1020This driver is used when installing the 200-HOE-1700 onto the adapter.200-DRV-1013This driver should be used when installing knives with the following tips: 200-TIP-2011, 200-TIP-0300, 200-TIP-3001, 200-TIP-3011 & 200-TIP-4011. It should also be used when installing the 200-KNF-0501, 200-KNF-0571, 200-KNF-0575.200-BNC-3100Stainless Steel square nut and bolt. Used to secure any quick change tip. This combination is made up of 200-BLT-3102 and 200-NUT-3101.200-DRV-1012This driver should be used for installing the 200-KNF-0813.880-WDG-0301This cast wedge adapter is designed for our 047, 610 & 612 seeding openers on all 50° curved bottom shanks except John Deere.200-QAS-4711This sub-plate is to be used in conjunction with the 200-QCA-4710 adapter on the Kongskilde VFM shank.200-QAS-4712This sub-plate is used in conjunction with the 200-QCA-4710 adapter on an S-tine. S-tines with a single hole can now use the Speed-LocTM system.78 BTT880-WDG-0300This cast wedge adapter is designed for our 047, 610 & 612 seeding openers on a John Deere 1810 & 1820 with 50° curved bottom shanks. In most cases Urethane Wedges should be installed with thick side up. Ask your Dealer for more information400-DRV-1000This driver can be used when installing any of the quick change sweeps and spoons.400-DRV-1010This driver should be used when installing the following knives: 200-KNF-0810, 200-KNF-0811, 410-KNF-0800, 410-KNF-0801. It should also be used for installing knives with the following tips: 200-TIP-0800 & 200-TIP-0801. 100-HAM-4000This 4 LB (1.8 kg) hammer is ideal for installing all quick change products.200-REL-1010 047-ACC-1001The Speed-Release tool must be used to remove 200 and 410 series sweeps and openers off the Speed-LocTM adapters.Helps direct the flow of seed in a focused row behind the opener. Use with 047-ASY-1000 or 675 series openers.300-BSH-1200This bushing adapts from a 1-1/8" (28 mm) O.D. air hose up to a 1-1/4" (31 mm) O.D. airhose.300-BSH-1205This bushing adapts from 1-1/8" (28 mm) O.D. air hose to 1-1/8" (28 mm) I.D. air hose.880-BSH-1130This bushing adapts from 1-1/4 inch (28 mm) down to 1-1/8 inch. (56mm) O.D. air hose up to a 1-1/4" (31 mm) O.D. airhose.880-HCL-0001This clip eliminates hose movement, as the sharp corners imbed into the granular pipe.680-ACC-1000Helps direct the flow of seed in a focused row behind the opener. Use with 680-ASY-1000 openers prior to 2012.79www.tillagetools.com880-ORF-0001880-CPL-2500This orifice is used to concentrate and direct the flow of liquid fertilizer on the 200-VRT-1061 & 200-KNF-0863.This coupler is used to attach an 1 1/4" OD Liquid Phosphorous tube. Included with all new Liquid Phosphorous openers. Accessories880-BSH-1150This bushing adapts from 1-1/4 inch (31 mm) O.D. air hose up to a 1-1/2" (31 mm) O.D. airhose.For Edge-On Accessories see page 38In most cases Urethane Wedges should be installed with thick side up. Ask your Dealer for more information047-ACC-1002Allows you to adapt to any shank with a open bottom hole. Keeps the bottom bolt in place on the John Deere 1820, 1830 & 2400.880-ASY-1000Adapt a .085 mm MaxQuip system with our NH3 (1/2") fertilizer openers. This kit gives you everything you need to adapt to existing line.80Single-Shoot Front Delivery, Advantage Series and Titan OpenersC-Shank Assemblies* Identifies components that are not included in the assembly. Please order separately.BTT610-ASY-4020344195106728Advantage Series'C' Shank Granular Fertilizer Item# Part# 1 610-HLD-2000 2 610-TIP-4041 3 610-TUB-1001 4 880-BSH-1130 5 047-CAP-1000 6 942-HRG-0754 7 906-NPT-2505 8 200-BNC-3100 9 908-NNI-2504 10 942-HRG-2004GRANULAR610-ASY-4026Advantage Series 'C' Shank Liquid Fertilizer28451091376Item# Part# 1 610-HLD-2000 2 610-TIP-4041 3 610-TUB-2526 4 880-BSH-1130 5 047-CAP-1000 6 942-HRG-0754 7 906-NPT-2505 8 200-BNC-3100 9 908-NNI-2504 10 942-HRG-200481www.tillagetools.com Reference675-ASY-1801GM & 675-ASY-1801GN Item# Part# 675-ASY-1801GM 675-ASY-1801GN 1 047-HLD-1000 n n 2 612-CAP-1000 n n 3 612-TUB-1010 n n 4 200-BNC-3100 n n 5 200-TIP-0801 n n 6 047-ACC-1001 n n 7 675-TUB-5025 n 8 675-TUB-1285 n 9 880-BSH-1130 n n 10 908-NNI-2504 n n 11 942-HRG-2004 n n 12 880-HCL-8117 n nRequires a hose clamp (880-HCL-8117)GRANULAR GRANULAR2453911 1018 7 12 612-ASY-0711 • 612-ASY-0712Bolt-On Side-BandDouble & Triple Shoot Knife Item# Part# 1 612-HLD-0711 n n n n 2 612-HLD-0712 n n n n 3 612-CAP-1002 n n n n n n n n 4 942-HRG-2004 n n n n n n n n 5 200-BNC-3100 n n n n n n n n 6 612-TIP-0711 n n n n 7 612-TIP-0712 n n n n 8 908-NNI-2504 n n n n n n n n 9 880-BSH-1130 n n n n n n n n 10 047-TUB-2540 n n n n 11 612-TUB-6061 n n n n 12 880-HCL-1828 n n n n n n n n 13 880-CPL-2500 n n n n 14 880-HCL-0001 n n n n (not shown)612-ASY-0711 (left)612-ASY-0711P (left)612-ASY-0712 (right)612-ASY-0712P (right)612-ASY-0712L (right)612-ASY-0712LP (right)612-ASY-0711L (left)612-ASY-0711LP (left)45Second bushing is required for Granular assembly1 or 27 or 6981310 9143126** Requires a hose clamp (880-HCL-1828)or (Not Shown)NOTES* The optional focus strip (047-ACC-1001) is reccomended but not included for openers 675-ASY-1801GM & 675-ASY-1801GN.(not shown)11Two 880-BSH-1130 are included with the granular openersTwo 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.82 * Identifies components are not included in the assembly. Please order separately.BTT Item# Part# 1 620-HLD-5000 2 620-TIP-0510 3 628-SBT-2000 4 200-BNC-3100 5 620-BLT-3100 6 906-NPT-3135 123Titan SeriesDouble-Shoot Knife Granular FertilizerGRANULARSingle-Shoot Front Delivery, Advantage Series and Titan OpenersC-Shank Assemblies047-ASY-1000 • 047-ASY-1000PLIQUID PHOSFront Delivery Bolt-On Knife Item# Part# 1 047-HLD-1000 n n 2 880-BSH-1130 n n 3 047-CAP-1000 n 4 047-TUB-2540 n 5 908-NNI-2504 n n 6 942-HRG-2004 n n 7 047-ACC-1001 n n 8 047-CAP-1001 n 9 880-CPL-2500 n047-ASY-1000047-ASY-1000P5 2793 8or64 1654620-ASY-501583www.tillagetools.com Reference620-ASY-5020 • 620-ASY-5010TitanDouble-Shoot Knife620-ASY-5010620-ASY-5020620-ASY-5020M Item# Part# 1 620-HLD-5000 n n n 2 620-TIP-0510 n n n 3 620-SSH-1000 n n n 4 200-BNC-3100 n n n 5 906-NPT-3135 n n n 6 620-BLT-3100 n n n 7 620-ACC-0001 n n 8 620-TUB-1021 n 9 695-TUB-1225 n A 880-HCL-5610 n n B 695-HCL-1220 nNOTES A & B: The hose clamp and "O" clamp are not shown in the diagram, but they are required to secure the tubes in place and they are included.620-ASY-5010620-ASY-5020 8620-ASY-5020M65371429GRANULAR84 * Identifies components that are not included in the assembly. Please order separately.BTT680-ASY-4026Advantage SeriesEdge-On Shank Liquid Fertilizer18 *479*365*NOTE 680-ACC-0001 is a spacer plate that is required for the Concord only. Not included in the assembly680-ACC-0002 is a spacer that is required for a Bourgault 3310. & 3320 only. Not included in the assembly.2Edge-On AssembliesSingle-Shoot Front Delivery, Advantage Series and Titan Openers680-ASY-4020 Item# Part# 1 680-HLD-2000 2 610-TIP-4041 3 610-TUB-1001 4 880-BSH-1130 5 942-HRG-0754 6 906-NPT-2505 7 200-BNC-3100 8* 680-ACC-0001 9* 680-ACC-0003 Item# Part# 1 680-HLD-2000 2 610-TIP-4041 3 610-TUB-2526 4 880-BSH-1130 5 942-HRG-0754 6 906-NPT-2505 7 200-BNC-3100 8* 680-ACC-0001 9* 680-ACC-0002Advantage SeriesEdge-On Shank Granular Fertilizer78 *419*2436 5*NOTE: 680-ACC-0001 is a spacer plate that is required for the Concord only. Not included in the assembly.680-ACC-0003 is a spacer plate that is required for a Bourgault 3310 & 3320 only. Not included in assembly.GRANULAR85www.tillagetools.com Reference682-ASY-0711 • 682-ASY-0712Edge-On Side-BandDouble & Triple Shoot Knife812**76 or 51 , 2 , 3 , 4 ,or910 Requires a hose clamp (880-HCL-8117)11*Component required for the Concord only. Not included in the assembly.Item# Part# 1 682-HLD-0711 n n 2 682-HLD-0711P n n 3 682-HLD-0712 n n 4 682-HLD-0712P n n 5 612-TIP-0711 n n n n 6 612-TIP-0712 n n n n 7 200-BNC-3100 n n n n n n n n 8 880-BSH-1130 n n n n n n n n 9 680-ACC-0001 n n n n n n n n 10 682-TUB-6061 n n n n 11 880-HCL-8117 n n n n 12 880-CPL-2500 n n n n682-ASY-0711 (left)682-ASY-0711P (left)682-ASY-0711L (left)682-ASY-0711LP (left)682-ASY-0712 (right)682-ASY-0712P (right)682-ASY-0712L (right)682-ASY-0712LP (right)(not shown)86Single-Shoot Front Delivery, Advantage Series and Titan Openers* Identifies components that are not included in the assembly. Please order separately.BTT680-ASY-1000 • 680-ASY-1000PEdge-On Single Shootwith Liquid Phos680-ASY-1000680-ASY-1000P Item# Part# 1 680-HLD-1000 n 2 680-HLD-1000P n 3 880-BSH-1130 n n 4* 680-ACC-0001 n n 5 880-CLP-2500 n32315680-ASY-1000 680-ASY-1000P44**Edge-On AssembliesLIQUID PHOSNOTES* 680- ACC-0001 required for the Concord only. Not included in the assembly.682-ASY-2063 • 682-ASY-2064111091 , 2 , 3 , 4 ,or5 , 6 , 7 , 8NOTES*680-ACC-0001 is a component required for the Concord only. Not included in the assembly.Side-Band KnifeLiquid Edge-On682-ASY-2063 (left)682-ASY-2063M (left)682-ASY-2063P (left)682-ASY-2063MP (left)682-ASY-2064 (right)682-ASY-2064M (right)682-ASY-2064P (right)682-ASY-2064MP (right) Item# Part# 1 682-KNF-2063 n 2 682-KNF-2063M n 3 682-KNF-2063MP n 4 682-KNF-2063P n 5 682-KNF-2064 n 6 682-KNF-2064M n 7 682-KNF-2064MP n 8 682-KNF-2064P n 9 880-BSH-1130 n n n n n n n n 10 682-DEF-1000 n n n n n n n n 11* 680-ACC-0001 n n n n n n n n 12 880-CPL-2500 n n n n 13 695-HCL-1220 n n n n12 Requires a "O" clamp (695-HCL-1220)13(not shown)87www.tillagetools.com Reference685-ASY-18013310 & 3320 Mid Row Shank19108111685-ASY-1801G685-ASY-1801M685-ASY-1801L685-ASY-1801NNOTES* Optional component to help hold Granular hose in place.Use the 680-ACC-0001 when installing on Concord drills - not shown & not included in assembly. *116432685-ASY-1801GN(not shown)685-ASY-1801GM685-ASY-1801GN685-ASY-1801M685-ASY-1801L685-ASY-1801N685-ASY-1801G5685-ASY-1801GM2 Item# Part# 1 680-HLD-1000 n n n n 2 685-HLD-1010 n n 3 695-SLV-1220 n n 4 685-TUB-1280 n n 5 685-TUB-5025 n n n 6 685-TUB-2565 n 7 880-HCL-8117 n n n n n n 8 880-BSH-1150 n n n 9 200-BNC-3100 n n n n n n 10 200-TIP-0801 n n n n n n 11* 880-HCL-0001 n n n* Identifies components that are not included in the assembly. Please order separately.88 BTT628-ASY-5015 Item# Part# 1 628-HLD-5000 2 628-TIP-0510 3 628-TIP-0512 4 628-SBT-2000 5 200-BNC-3100 6 906-NPT-3135 7 620-BLT-3100 8 628-BSH-10003310 Double-Shoot KnifeAustralian628-ASY-5010 - 628-ASY-5020Edge-On Titanwith NH3 Item# Part# 1 628-HLD-5000 n n n 2 628-TIP-0510 n n n 3 620-SSH-1000 n n n 4 200-BNC-3100 n n n 5 906-NPT-3135 n n n 6 620-BLT-3100 n n n 7 628-BSH-1000 n n n 8 628-TUB-1021 n 9 695-TUB-1226 n 10 620-ACC-0001 n n 11 695-SLV-1220 n A 880-HCL-5610 n n B 695-HCL-1220 n628-ASY-5010628-ASY-5020628-ASY-5020MNOTES A & B The hose clamp and "O" clamp are not shown in the diagram, but they are required to secure the tubes in place and they are included.285104111123943667587ororSingle-Shoot Front Delivery, Advantage Series and Titan OpenersEdge-On Assemblies(not shown)686-ASY-0711 • 686-ASY-0712Requires Hose Clamp 880-HCL-1828Seed Hawk89www.tillagetools.com24186539107ororReferenceSide-BandBuilt for the Seed Hawkl Item# Part# 1 686-HLD-0711 n n n n 2 686-HLD-0712 n n n n 3 612-TIP-0711 n n n n 4 612-TIP-0712 n n n n 5 200-BNC-3100 n n n n n n n n 6 047-TUB-2540 n n n n 7 612-TUB-6061 n n n n 8 880-CPL-2500 n n n n 9 880-HCL-1828 n n n n n n n n 10 880-HCL-0001 n n n n n n n n686-ASY-0711L (left)686-ASY-0711GP (left)686-ASY-0711LP (left)686-ASY-0712GP (right)686-ASY-0712L (right)686-ASY-0712LP(right)686-ASY-0712G (right)686-ASY-0711G (left)(not shown)Two 880-HCL-0001 are included with the granular openers. They are intended to provide additional security to installed hoses.90AssembliesMorris Contour I* Identifies components that are not included in the assembly. Please order separately.BTT 683-ASY-0711 • 683-ASY-0712 Item# Part# 683-ASY-4020G 683-ASY-4020L 1 683-HLD-2000 n n 2 610-TIP-4041 n n 3 200-BNC-3100 n n 4 683-TUB-6061 n 5 880-HCL-8117 n4312Requires Hose Clamp 880-HCL-8117Requires Hose Clamp 880-HCL-1828582 1495107 63oror683-ASY-4020Side-BandBuilt for the Morris Contour DrillPaired RowBuilt for the Morris Contour Drill GRANULAR(not shown) Item# Part# 1 683-HLD-0711 n n n n 2 683-HLD-0712 n n n n 3 612-TIP-0711 n n n n 4 612-TIP-0712 n n n n 5 200-BNC-3100 n n n n n n n n 6 047-TUB-2540 n n n n 7 612-TUB-6061 n n n n 8 880-HCL-1828 n n n n n n n n 9 880-CPL-2500 n n n n 10 880-HCL-0001 n n n n (not shown)683-ASY-0711 (left)683-ASY-0711P (left)683-ASY-0712 (right)683-ASY-0712P (right)683-ASY-0712L (right)683-ASY-0712LP (right)683-ASY-0711L (left)683-ASY-0711LP (left)Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.#1091www.tillagetools.comAssembliesMorris Contour IIReference693-ASY-0711 • 693-ASY-0712 Item# Part# 684-ASY-4020G 684-ASY-4020L 1 684-HLD-2000 n n 2 610-TIP-4041 n n 3 200-BNC-3100 n n 4 684-TUB-6061 n 5 880-HCL-8117 nRequires Hose Clamp 880-HCL-18284312Requires Hose Clamp 880-HCL-811751 249510763ororor693-ASY-4020Side-BandBuilt for the Morris Contour II Drill Paired RowGRANULARBuilt for the Morris Contour II Drill(not shown) Item# Part# 1 693-HLD-0711 n n n n 2 693-HLD-0712 n n n n 3 612-TIP-0711 n n n n 4 612-TIP-0712 n n n n 5 200-BNC-3100 n n n n n n n n 6 047-TUB-2540 n n n n 7 612-TUB-6061 n n n n 8 880-HCL-1828 n n n n n n n n 9 880-CPL-2500 n n n n 10 880-HCL-0001 n n n n (not shown)693-ASY-0711G (left)693-ASY-0711GP (left)693-ASY-0712G (right)693-ASY-0712GP (right)693-ASY-0712L (right)693-ASY-0712LP (right)693-ASY-0711L (left)693-ASY-0711LP (left)Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.#108* Identifies components that are not included in the assembly. Please order separately. 694-ASY-0711 • 694-ASY-0712 Item# Part# 694-ASY-4020G 694-ASY-4020L 1 694-HLD-2000 n n 2 610-TIP-4041 n n 3 200-BNC-3100 n n 4 683-TUB-6061 n 5 880-HCL-8117 n43 12Requires Hose Clamp 880-HCL-81175694-ASY-4020AssembliesCase IH 700, New Holland P2060 and Flexi-Coil PH550092 BTTSide-BandBuilt for the Case IH 700, New Holland P2060 and Flexi-Coil PH5500Paired RowBuilt for the Case IH 700, New Holland P2060 and Flexi-Coil PH5500 GRANULAR(not shown) Item# Part# 1 694-HLD-0711 n n n n 2 694-HLD-0712 n n n n 3 612-TIP-0711 n n n n 4 612-TIP-0712 n n n n 5 200-BNC-3100 n n n n n n n n 6 047-TUB-2540 n n n n 7 612-TUB-6061 n n n n 8 880-HCL-1828 n n n n n n n n 9 880-CPL-2500 n n n n 10 880-HCL-0001 n n n n (not shown)(not shown)694-ASY-0711G (left)694-ASY-0711GP (left)694-ASY-0712G (right)694-ASY-0712GP (right)694-ASY-0712L (right)694-ASY-0712LP (right)694-ASY-0711L (left)694-ASY-0711LP (left)Requires Hose Clamp 880-HCL-1828 82 1495763oror#10Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.93AssembliesCase IH 800, New Holland P2070 and Flexi-Coil PH5700Reference684-ASY-0711 • 684-ASY-0712 Item# Part# 684-ASY-4020G 684-ASY-4020L 1 684-HLD-2000 n n 2 610-TIP-4041 n n 3 200-BNC-3100 n n 4 684-TUB-6061 n 5 880-HCL-8117 n4312Requires Hose Clamp 880-HCL-8117 5684-ASY-402093www.tillagetools.comSide-BandBuilt for the Case IH 800, New Holland P2070, and Flexi-Coil PH5700 Paired RowGRANULARBuilt for the Case IH 800,New Holland P2070 and Flexi-Coil 5700(not shown) Item# Part# 1 684-HLD-0711 n n n n 2 684-HLD-0712 n n n n 3 612-TIP-0711 n n n n 4 612-TIP-0712 n n n n 5 200-BNC-3100 n n n n n n n n 6 047-TUB-2540 n n n n 7 612-TUB-6061 n n n n 8 880-HCL-1828 n n n n n n n n 9 880-CPL-2500 n n n n 10 880-HCL-0001 n n n n (not shown)(not shown)684-ASY-0711G (left)684-ASY-0711GP (left)684-ASY-0712G (right)684-ASY-0712GP (right)684-ASY-0712L (right)684-ASY-0712LP (right)684-ASY-0711L (left)684-ASY-0711LP (left)Requires Hose Clamp 880-HCL-1828 82 1495763oror#10Two 880-HCL-0001 are only included with the granular openers. They are intended to provide additional security to installed hoses.94 BTTStep 1:Remove worn tip by using a plasma cutter, torch or air arc gouger to cut the weld taking care not to cut into the holder. Grind the remainder of the weld off the knife holder.Step 2:Tack weld the new tips onto the holders. Take care to align the tips at the correct angle.(chrome) These are the replacement weld on tips for any of the knives with a 200-KNF-75-- part number.100-TIP-7500(carbide) These are the replacement weld on tips for any of the knives with a 200-KNF-75-- part number.200-TIP-7501(chrome) These are the replacement weld on tips for any of the following knives: 200-KNF-0810, 200-KNF-0811, 410-KNF-0800, 410-KNF-0801, 410-KNF-0824, 410-KNF-0825, 410-KNF-0830, 410-KNF-0831410-TIP-0800 (carbide) These are the replacement weld on tips for any of the following knives: 200-KNF-0810, 200-KNF-0811, 410-KNF-0800, 410-KNF-0801, 410-KNF-0824, 410-KNF-0825, 410-KNF-0830, 410-KNF-0831410-TIP-0801 This is the replacement weld on tip for the 200-KNF-0863 liquid double-shoot knife.200-TIP-0817Replacement Weld-On TipsWeldingStep 3:Preheat the tips to 300 - 400 F. Confirm this temperature using a heat crayon or 1/16 inch 50/50 solder will also melt at this temperature. Set it up so you have a couple of knives preheating while you are welding one.Step 4:Weld the tips using 7018 rod or equivalent mig wire. As soon as you are finished welding each knife place it in a steel container and cover with fiberglass insulation so they cool gradually to shop temperature.Welding instructions for high chrome tipsProduct depth comparisonAll product depths are compared to a 200 series sweep0.001.002.003.004.005.006.007.000.001.002.003.004.005.006.007.00050-KNH-0500 w/ 200-TIP-0523050-KNH-0510 & 0512 w/ 200-TIP-0503050-KNH-0810 w/ 200-TIP-0800050-KNH-0810 w/ 200-TIP-1011050-KNH-0812 w/ 200-TIP-0800050-KNH-0812 w/ 200-TIP-1011410-KNF-0800 & 410-KNF-0801410-KNF-0824 & 410-KNF-0825410-KNF-0830 & 410-KNF-0831410-KNH-0500 w/ 200-TIP-0523410-KNH-4000 w/ 200-TIP-0801410-KNH-4024 w/ 200-TIP-0801410-PWV-0400410-PWV-0406410-PWV-0600 & 410-PWV-0608410-PWV-0800 & 410-PWV-0808410-PWV-1000 & 410-PWV-1008410-PWV-1200 & 410-PWV-1208410-PWV-1400 & 410-PWV-1408410-PWV-1600 & 410-PWV-1608410-PWV-1800 & 410-PWV-1808410-SPK-0200410-SPN-0300 & 410-SPN-0308600-KNH-7510 w/ 600-TIP-7501600-KNH-7520 w/ 600-TIP-7501600-KNH-7530 w/ 600-TIP-7501600-KNH-7540 w/ 600-TIP-7501600-KNH-7550 w/ 600-TIP-7501600-KNH-7561 w/ 600-TIP-7501600-KNH-7562 w/ 600-TIP-7501410 series047-KNH-1000 050-KNH-0810 & 0812 w/ 200-TIP-0800050-KNH-0810 & 0812 w/ 200-TIP-0801050-KNH-0810 & 0812 w/ 200-TIP-3000050-KNH-0810 & 0812 w/ 200-TIP-3001050-KNH-0810 & 0812 w/ 200-TIP-3011050-KNH-0810 & 0812 w/ 200-TIP-1011200-HOE-1700200-KNF-0800 & 0801200-KNF-0803200-KNF-0863 & 0861200-KNF-7511, 7510, 7518, 7542200-KNF-7520, 7521, 7524, 7525, 7530, 7531200-KNH-0500 w/ 200-TIP-0523200-KNH-0510 w/ 200-TIP-0503200-KNH-0510 w/ 200-TIP-0507200-KNH-4010 w/ 200-TIP-0800200-KNH-4010 w/ 200-TIP-0801200-KNH-4010 w/ 200-TIP-3000200-KNH-4010 w/ 200-TIP-3001200-KNH-4010 w/ 200-TIP-3011200-KNH-4010 w/ 200-TIP-1011200-PWV-0405200-PWV-0400 to 200-PWV-1200200-PWV-1300 & 200-PWV-1400200-PWV-0508 to 200-PWV-1208200-PWV-0518200-PWV-1308 & 200-PWV-1408200-SPN-0200, 0208, 0300, 0308200-SPK-0200 & 0215200-VRT-1011, 1000, 1016, 1040200-VRT-1061599-KNH-7512 & 7540 w/ 600-TIP-7500 & 7501www.tillagetools.com 95 Reference200 seriesdepth in inchesdepth in inches200 SERIES (Cultivator) 410 SERIES (Chisel Plow)SHANK DEGBOLT SIZEHOLE CENTER200-QCA-4700200-QCA-4710200-QCA-5000200-QCA-5010100-WDG-0700410-QCA-5000410-QCA-5010400-WDG-0300400-WDG-0700SHANK DEGBOLT SIZEHOLE CENTER200-QCA-4700200-QCA-4710200-QCA-5000200-QCA-5010100-WDG-0700410-QCA-5000410-QCA-5010400-WDG-0300400-WDG-0700200 SERIES (Cultivator) 410 SERIES (Chisel Plow)ADAPTER REQUIRED ADAPTER REQUIREDMAKE & MODEL MAKE & MODELApplication Chart for North America and AustraliaAFM180, 200, 250, 880 43° 7/16 1-3/4 • • * (For knife openers only) 150, 2300, 310, 300 50° 1/2 2-1/4 • • 350 Scarichisel 50° 1/2 2-1/4 • •ANDERSONField Cultivators 47° 3/8 1-3/4 • Chisel Plows 50° 1/2 2-1/4 • •BOURGAULTField Cultivators Including 6200/6800/8800/8810/8910 47° 1/2 1-3/4 • 5710, 5810 Air Drill 47° 1/2 1-3/4 •Chisel Plows Including 9200, 9400 & 9800 50° 1/2 2-1/4 200-QCA-5000 • 3310 & 3320 Edge-On (no adapter for this application)BRADYField Cultivators 43° 3/8 1-5/8 (no adapter available for this application) Chisel Plows 50° 7/16 2-1/4 • •BRILLIONHFCT Mo 47 7/16 1-5/8 •BUSH HOGField Cultivators 47° 3/8 1-3/4 • Chisel Plows 50° 7/16 2-1/4 • •CASE FC, FCW, FCM 47° 3/8 1-3/4 • 10, 50, 55, 645, 4700, 4900 & 5000, 645 43° 1/2 2-1/4 • • • • CASE IH 45, 4300, 4500, 4600, 4700, 4800 & 4900 47° 7/16 1-3/4 • Vibrashank 47° 7/16 1-3/4 • Vibrachisel 5600 & 5700 43° 1/2 2-1/4 • • • • 5800, 5850 & 5900 50° 1/2 2-1/4 • • PTX 300, PTX 600 50° 1/2 2-1/4 • • ATX Air Drill with edge - on 84 degree shank (no adapter available for this application) ATX 400, 700 Air Hoe Drill 350 lb or 550 lb trip 50° 1/2 2-1/4 • Concord C-shanks 50° 1/2 2-1/4 • • Edge-on shanks (no adapter available for this application)CCIL 202, 179, 279 & 379 47° 3/8 1-3/4 • 203, 204, 205 47° 1/2 2-1/2 • • • • 806, 807 & 808 43° 1/2 2-1/2 • • • • Chisel Plow (thick shank) 50° 7/16 2-1/4 • •CNH (DMI) Field Cultivators 47° 7/16 1-3/4 • DEGELMANField Cultivators 47° 7/16 1-3/4 • 500 50° 7/16 2-1/4 • • 3000-2 50° 1/2 2-1/4 • •DEMSTERChisel Plows 54° 7/16 2-1/4 (no adapter available for this application) EDWARDSChisel Plows 50° 7/16 2-1/4 • • FORWARDBourgault Tyne 280, 2700, 2800, 8800 47° 1/2 1-3/4 • Fusion Delta 47° 1/2 1-3/4 • 3000 & 400 Series C/P 50° 1/2 2-1/4 • •96 BTTEZEE-ONField Cultivators including 3500, 3550, & 5550 47° 1/2 1-3/4 • Model 6000 with field cult. shank option 47° 1/2 1-3/4 • Model 6000 with chisel plow shank option 50° 1/2 2-1/4 • • All chisel plows including Model 7450 50° 1/2 2-1/4 • •FLEXI-COIL200, 400 & 800 47° 7/16 1-3/4 • 300, 340 & 600 50° 1/2 2-1/4 • • 820 & ST820 with 350 lb & 550 lb trips 47° 1/2 1-3/4 • 820 & ST820 with 550 lb & 650 lb trips 50° 1/2 2-1/4 • • 5000 & 7500 (depending on shank option) 47° 1/2 1-3/4 • 5000 & 7500 (depending on shank option) 50° 1/2 2-1/4 • • Edge-On (no adapter for this application) 5000HD and 5500 Air Hoe Drill 350 lb or 550 lb trip 50 1/2 2-1/4 • FRIGGSTADField Cultivators 47° 7/16 1-3/4 • Chisel Plows (older models) 50° 7/16 2-1/4 • • Chisel Plows 50° 1/2 2-1/4 • •GASON5100 Series 46° 7/16 1-3/4 • Scaritill & EH Scaritill 47° 1/2 both • 7100 Ecotill 50° 1/2 2-1/4 • •GESSNERHR 1200 50° 1/2 2-1/4 • •GLENCOEPC, MPC & PCMW 47° 3/8 1-3/4 • Chisel Plows 47° 7/16 2-1/4 • • • High Clearance 50° 7/16 2-1/4 • •GRAHAMChisel Plows 50° 1/2 2-1/4 • • 400, 500, 1600 & 2600 54° 7/16 2-1/4 (no adapter available for this application)GREAT PLAINS8000, 7000 47 7/16 1-3/4 •GYRAL IMPLEMENTSPenetrator T23, T25 43° 1/2 both • • • • Ag Boss T30 43° 7/16 both • • • •GYSLERChisel Plows 47° 7/16 2-1/4 • • •HESSTONField Cultivators 47° 1/2 1-3/4 • Chisel Plows 50° 1/2 2-1/4 • •HINIKERField Cultivators 47° 7/16 1-3/4 • Chisel Plows 50° 1/2 2-1/4 • •HORWOOD BAGSHAW350 Scaribar Edge-On 47° 1/2 1-3/4 • HORWARDChisel Plows** 50° 9/16 2-1/4 • •INTERNATIONAL45, 46 & 47 47° 7/16 1-3/4 • 10, 50, 55, 75, 509 & 645 43° 1/2 2-1/4 • • • • Speed-LocTM adapter chart200 SERIES (Cultivator) 410 SERIES (Chisel Plow)200 SERIES (Cultivator) 410 SERIES (Chisel Plow)ADAPTER REQUIRED ADAPTER REQUIREDMAKE & MODEL MAKE & MODELNOTE *Sweeps will not work with this combination, knives only **Bolt sizes will require adapting NOBLEXR20 50° 7/16 2-1/4 • • 8000 & 4000 Multi-Tool 50° 1/2 2-1/4 • • QUINSTARField Finisher 47° 7/16 1-3/4 • Fallow Master III 50° 1/2 2-1/4 • •RYAN (RFM)1000 Series 47° 7/16 1-3/4 •SALFORDFeild Cultivator 47° 7/16 1-3/4 • SCHULTE1000 Series 50° 7/16 2-1/4 • •SMALEMultivator 47° 7/16 1-3/4 • Chisel Plows 50° 1/2 2-1/4 • •SUMMERSSuperchisel 50° 1/2 2-1/4 • •SUNFLOWERChisel Plows 50° 1/2 2-1/4 • • 5000, 6000,7000 47 7/16 1-3/4 •TAYLORField Cultivators 47° 3/8 1-3/4 •UNVERFERTHPerfecta II Field Cultivators 47 7/16 1-3/4 •VICTORYChisel Plows 50° 1/2 2-1/4 • •WIL-RICHField Cultivators 47° 7/16 1-3/4 • Chisel Plows (1993 & older) 43° 7/16 2-1/4 • • • • Chisel Plows (1994 & newer) 50° 1/2 2-1/4 • • YEOMANS Graham HoemesUS Chisel Plows 50° 1/2 2-1/4 • •97www.tillagetools.comSHANK DEGBOLT SIZEHOLE CENTER200-QCA-4700200-QCA-4710200-QCA-5000200-QCA-5010100-WDG-0700410-QCA-5000410-QCA-5010400-WDG-0300400-WDG-0700SHANK DEGBOLT SIZEHOLE CENTER200-QCA-4700200-QCA-4710200-QCA-5000200-QCA-5010100-WDG-0700410-QCA-5000410-QCA-5010400-WDG-0300400-WDG-0700ReferenceJANKEUniv Direct Drill 50° 1/2 2-1/4 • • U/D Drill (hyd) Early 50° 1/2 2-1/4 • •JEOFFROY450 47° 3/8 1-3/4 •JOHN DEERE1000, 1010 & 1050 43° 3/8 1-5/8 (no adapter available for this application) 726, 2210 & 2200 47° 3/8 1-3/4 • 940, 960 & 985 47° 7/16 1-3/4 • 730 47° 1/2 1-3/4 • 735, 737, 610, 680, 685, 1600, 1610 & 1650 50° 1/2 2-1/4 • • 1810, 1820, 1830, 1835 with 350 lb trips 47° 1/2 1-3/4 • 1810, 1820, 1830, 1835 with 500 lb trips 50° 1/2 2-1/4 • • • 2400 & 2410 50° 1/2 2-1/4 • • •JOHN SHEARERUniversal Cultivator 47° 7/16 1-3/4 • Chisel Plows 50° 1/2 2-1/4 • •KONGSKILDEC-shank 47° 1/2 1-3/4 • S-tine 47° 7/16 1-5/8 •KRAUSE600, 900, 3100 & 4200 47° 7/16 1-3/4 • 4000 50° 1/2 2-1/4 • • 5630, 5635 47 1/2 1-3/4 •LEONCP77 43° 7/16 2-1/4 • • • • All other Leon Chisel Plows 50° 1/2 2-1/4 • • Field Cultivators 47° 7/16 1-3/4 •MASSEY FERGUSON160 47° 3/8 1-3/4 • 259 47° 7/16 1-3/4 • 124, 125, 126, 128 & 133 54° 7/16 2-1/4 (no adapter available for this application) MF 7300 Chisel Plow 50° 1/2 2-1/4 • •MORRISL225, L233, L240 & L320 47° 3/8 1-3/4 • Challenger II, 9000 & 9100 47° 1/2 1-3/4 • Maxim & Maxim II 47° 1/2 1-3/4 • Maxim III 47° 1/2 1-3/4 • Concept 2000 with 400 lb trip 47° 1/2 1-3/4 • Concept 2000 with 550 lb trip 47° 1/2 1-3/4 • Concept 2000 with LH 755 lb trip 50° 1/2 2-1/4 • • 220, 4, 5, 6 & 7 43° 7/16 2-1/4 • • • • Magnum I 43° 1/2 2-1/4 • • • • 912, 8900 9000 & Mag. II 50° 1/2 2-1/4 • • Magnum III with LH 755 lb trip 50° 1/2 2-1/4 • • Edge-On (Contour Drill) (no adapter available for this application)NEW HOLLANDSD 440A & SD550A Air hoe drill (depending on shank option)47° 1/2 1-3/4 • SD 440A & SD550A Air hoe drill (depending on shank option)50° 1/2 2-1/4 • • ST 540 Chisel plow 50° 1/2 2-1/4 • • ST 250 47° 1/2 1-3/4 • ST 830 with 350 lb trip 47° 1/2 1-3/4 • ST 830 with 550 lb trip (depending on shank option) 47° 1/2 1-3/4 • ST 830 with 550 lb trip (depending on shank option) 50° 1/2 2-1/4 • • ST 830 with 650 lb trip 50° 1/2 2-1/4 • • P2050 & P2060 Air Hoe Drill 350 lb or 550 lb trip 50 1/2 2-1/4 •98 BTT047 series Bolt-on sweeps on light & medium duty cultivatorsAPPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES1" Bourgault shank without seed boot 1/2" x 2" 1/2" x 2" Plowbolts, no lockwasher, regular nut1" Bourgault shank with Bourgault round tube seed boot 1/2" x 2" 1/2" x 2" Plowbolts, no lockwasher, regular nut1" Bourgault shank with Bourgault square tube seed boot 1/2" x 2" 1/2" x 2-1/4" Plowbolts, no lockwasher, regular nut7/8" Bourgault shank without seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plowbolts, no lockwasher, regular nut7/8" Bourgault shank with Bourgault round tube seed boot 1/2" x 1-3/4" 1/2" x 2" Plowbolts, no lockwasher, regular nut7/8" Bourgault shank with Bourgault square tube seed boot 1/2" x 1-3/4" 1/2" x 2-1/4" Plowbolts, no lockwasher, regular nut3/4" Bourgault shank without seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plowbolts, no lockwasher, regular nut3/4" Bourgault shank with Bourgault round tube seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plowbolts, no lockwasher, regular nut3/4" Bourgault shank with Bourgault square tube seed boot 1/2" x 1-3/4" 1/2" x 2" Plowbolts, no lockwasher, regular nut3/4" Degelman shank without seed boot 7/16" x 1-3/4" 7/16" x 1-3/4" Plowbolts, no lockwasher, regular nut7/8" Flexi-Coil shank without seed boot 7/16" x 1-3/4" 7/16" x 1-3/4" Plowbolts, no lockwasher, regular nut1/2" Morris Challenger shank without seed boot 3/8" x 1-1/2" 3/8" x 1-1/2" Plowbolts, no lockwasher, regular nut5/8" Morris Challenger shank without seed boot 3/8" x 1-1/2" 3/8" x 1-1/2" Plowbolts, no lockwasher, regular nut5/8" John Deere shank without seed boot 7/16" x 1-1/2" 7/16" x 1-1/2" Plowbolts, no lockwasher, regular nut9/16" CIL shank without seed boot 3/8" x 1-1/2" 3/8" x 1-1/2" Plowbolts, no lockwasher, regular nut1/2" Case IH shank without seed boot 7/16" x 1-1/2" 7/16" x 1-1/2" Plowbolts, no lockwasher, regular nutNOTES: 1) All Bourgault sweeps come with 1/2? holes. Shanks with 3/8? & 7/16? holes require special oversize (O/S) head plowbolts. 2) When bolting a seed boot: - usually it is the bottom bolt which bolts the seed boot to the shank, the top bolt should remain the same length as listed above. - if the seed boot cross-section at the point the bolt goes through is 1/8? thick or less, use the same bolt length as above without the lock washer. - if the seed boot cross-section at the point the bolt goes through is greater than 1/8?, increase bolt length by adding the measured cross-section of the seed boot at the point the bolt goes through to to the above lengths.043 & 050 series Bolt-on sweeps on heavy duty chisel plowsAPPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES1" Bourgault shank without seed boot 1/2" X 2" 1/2" X 2" Plowbolts, no lockwasher, regular nut1" Bourgault shank with Bourgault splitter seed boot #6505-42 1/2" X 2" 1/2" X 2-1/4" Plowbolts, no lockwasher, regular nut1-1/4" Bourgault shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plowbolts, no lockwasher, regular nut1-1/4" Bourgault shank with Bourg. splitter seed boot #6505-42 1/2" X 2-1/4" 1/2" X 2-1/2" Plowbolts, no lockwasher, regular nut1" John Deere shank without seed boot 1/2" X 2" 1/2" X 1-3/4" Plowbolts, no lockwasher, regular nut3/4" Degelman shank (50 degree) without seed boot 1/2" X 1-3/4" 1/2" X 1-3/4" Plowbolts, no lockwasher, regular nut1-1/4" Flexi-Coil shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plowbolts, no lockwasher, regular nut1" Morris shank (43 degree) without seed boot 1/2" X 2" 1/2" X 2" Plowbolts, no lockwasher, regular nut7/8" Shulte shank without seed boot 1/2" X 2" 1/2" X 2" Plowbolts, no lockwasher, regular nut1-1/4" CIL shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plowbolts, no lockwasher, regular nut1-1/4" IH shank without seed boot 1/2" X 2-1/4" 1/2" X 2-1/4" Plowbolts, no lockwasher, regular nut3/4" Case IH Vibra shank without seed boot 1/2" x 1-3/4" 1/2" x 1-3/4" Plowbolts, no lockwasher, regular nutNOTES: 1) All Bourgault sweeps come with 1/2? holes. Shanks with 3/8? & 7/16? holes require special oversize (O/S) head plowbolts. 2) When bolting a seed boot: - usually it is the bottom bolt which bolts the seed boot to the shank, the top bolt should remain the same length as listed above. - if the seed boot cross-section at the point the bolt goes through is 1/8? thick or less, use the same bolt length as above without the lock-washer. - if the seed boot cross-section at the point the bolt goes through is greater than 1/8?, increase bolt length by adding the measured cross-section of the seed boot at the point the bolt goes through to to the above lengths.General note: Not every shank has been listed in the bolt length charts. We have tried to list a variety of different shanks with varying thicknesses. To find the appropriate bolt length for a make or model that is not listed in the chart simply find a shank in the chart that is the same thickness and the bolt length should be the same.Bolt length chartBottom BoltBottom BoltTop BoltTop Bolt99www.tillagetools.com Reference200 series QC adapter — part #200-QCA-4700APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES1" Bourgault shank without seed boot 1/2" x 2-1/4" no lockwasher 1/2" x 2-1/4" no lockwasher Hex-Head bolts1" Bourgault shank with round tube Bourgault seed boot 1/2" x 2" no lockwasher 1/2" x 2-1/4" no lockwasher Hex-Head bolts, Grade 8 req'd1" Bourgault shank with square tube Bourgault seed boot 1/2" x 2" no lockwasher 1/2" x 2-1/2" no lockwasher Hex-Head bolts, Grade 8 req'd7/8" Bourgault shank without seed boot 1/2" x 2" no lockwasher 1/2" x 2" no lockwasher Hex-Head bolts7/8" Bourgault shank with round tube Bourgault seed boot 1/2" x 2" no lockwasher 1/2" x 2-1/4" no lockwasher Hex-Head bolts, Grade 8 req'd7/8" Bourgault shank with square tube Bourgault seed boot 1/2" x 2" no lockwasher 1/2" x 2-1/4" no lockwasher Hex-Head bolts, Grade 8 req'd3/4" Bourgault shank without seed boot 1/2" x 2" no lockwasher 1/2" x 2" no lockwasher Hex-Head bolts3/4" Bourgault shank with round tube Bourgault seed boot 1/2" x 1-3/4" no lockwasher 1/2" x 2" c/w with lockwasher Hex-Head bolts3/4" Bourgault shank with square tube Bourgault seed boot 1/2" x 1-3/4" no lockwasher 1/2" x 2-1/4" with lockwasher Hex-Head bolts3/4" Ezee-On shank without seed boot 7/16" x 1-3/4" 7/16" x 1-3/4" Hex-Head bolts See note # 3 below7/8" Ezee-On shank without seed boot 7/16" x 2" 7/16" x 2" Hex-Head bolts See note # 3 belowNOTES: 1) Above bolt lengths are determined using Prevailing Torque Side Lock nuts-Grade C. This special locknut is necessary to keep the adapter tight. It is very important to use it, especially in stony or hard ground conditions. 2) Grade 8 bolts are required with the Bourgault 7/8" & 1" shanks where seed boots are involved. If not used, bolt loosening may occur. 3) Shanks with 7/16" holes require the special oversize head hex-bolt.200 series QC adapter — part #200-QCA-4710APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES3/4" & 7/8" Flexi-Coil shank without seed boot 7/16" x 2-1/4" no lockwasher 7/16" x 2-1/4" no lockwasher Plowbolt, see note # 2 below7/8" Flexi-Coil shank with # 5649 seed boot 7/16" x 3-7/8" no lockwasher 7/16" x 2-1/2" no lockwasher Plowbolt, see note # 2 below1/2" Morris Challenger shank without seed boot 3/8" x 1-3/4" no lockwasher 3/8" x 1-3/4" no lockwasher Plowbolt, see note # 2 below5/8" Morris Challenger shank without seed boot 3/8" x 2" no lockwasher 3/8" x 2" no lockwasher Plowbolt, see note # 2 below7/8" Morris shank without seed boot 7/16" x 2-1/4" no lockwasher 7/16" x 2-1/4" no lockwasher Plowbolt, see note # 2 below9/16" CIL shank without seed boot 3/8" x 2" no lockwasher 3/8" x 2" no lockwasher Plowbolt, see note # 2 below5/8" John Deere shank without seed boot 7/16" x 2" no lockwasher 7/16" x 2" no lockwasher Plowbolt, see note # 2 below3/4" Degelman shank 7/16" x 2-1/4" no lockwasher 7/16" x 2-1/4" no lockwasher Plowbolt, see note # 2 below9/16" Willrich shank without seed boot 1/2" x 2" no lockwasher 1/2" x 2" no lockwasher Plowbolt200 series QC adapter — part #200-QCA-5010APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES1" shank without seed boot or wedge 1/2 x 2-1/2" with lockwasher 1/2 x 2-1/2" with lockwasher Plowbolt1-1/4" shank without seed boot or wedge 1/2 x 2-3/4" with lockwasher 1/2 x 2-3/4" with lockwasher PlowboltNOTES: 1) Above bolt lengths are determined using Prevailing Torque Side Lock nuts-Grade C. This special lock nut is necessary to keep the adapter tight. 2) Shanks with 3/8" & 7/16" holes require special oversize head plowbolts. 3) When bolting a seed boot: - usually it is the bottom bolt which bolts the seed boot to the shank, the top bolt should remain the same length as listed above. - if the seed boot cross-section at the point the bolt goes through is 1/8" thick or less, use the same bolt length as above without the lockwasher. - if the seed boot cross-section at the point the bolt goes through is greater than 1/8", increase bolt length by adding the measured cross-section of the seed boot at the point the bolt goes through to the above lengths.Bottom BoltBottom BoltBottom BoltTop BoltTop BoltTop Bolt100 BTT410 series QC adapter — part #410-QCA-5000APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES1" Bourgault shank without seed boot 1/2" x 2-1/2" 1/2" x 2-1/2” Hex-Head1" Bourgault shank with Bourgault splitter seed boot # 6505-42 1/2" x 2-1/2" 1/2" x 2-3/4" Hex-Head1-1/4" Bourgault shank without seed boot 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-Head1-1/4" Bourgault shank with Bourg. splitter seed boot # 6505-42 1/2" x 2-3/4" 1/2" x 3" Hex-Head410 series QC adapter — part #410-QCA-5010APPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTES1" shank without seed boot or wedge 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-Head1-1/4" shank without seed boot or wedge 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-HeadNOTES: 1) Above bolt lengths are determined using Prevailing Torque Side Lock nuts-Grade C. This special lock nut is necessary to keep the adapter tight. 2) When bolting a seed boot. - usually it is the bot-tom bolt which bolts the seed boot to the shank, the top bolt should remain the same length as listed above. - if the seed boot cross-section at the point the bolt goes through is 1/8" thick or less, use the same bolt length as above without the lockwasher. - if the seed boot cross-section at the point the bolt goes through is greater than 1/8", increase bolt length by adding the measured cross-section of the seed boot at the point the bolt goes through to the above lengths. 3) When bolting an adapter using a wedge: - a wedge will only be used when using the 410-QCA-5010 adapter on 43 & 47 degree Chisel Plows. Measure the cross-section of the wedge at both bolt holes & add this amount to the above numbers. Remember that the measured cross-section will be different at each hole in the wedge.600 series quick tip knivesAPPLICATION TOP HOLE BOTTOM HOLE SPECIAL NOTESFor 47 & 50 degree applications — no wedge needed.1-1/4" Bourgault shank 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-Head bolt, reg. nut & lock.1" Bourgault shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-Head bolt, reg. nut & lock.7/8" Bourgault shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-Head bolt, reg. nut & lock.3/4" Bourgault shank 1/2" x 2-1/4" 1/2" x 2-1/4" Hex-Head bolt, reg. nut & lock.1-1/4" Flexi-Coil shank 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-Head bolt, reg. nut & lock.1-1/4" Morris shank 1/2" x 2-3/4" 1/2" x 2-3/4" Hex-Head bolt, reg. nut & lock. See note # 1 below1" John Deere shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-Head bolt, reg. nut & lock.7/8" Shulte shank 1/2" x 2-1/2" 1/2" x 2-1/2" Hex-Head bolt, reg. nut & lock.3/4" Degelman shank 1/2" x 2-1/4" 1/2" x 2-1/4" Hex-Head bolt, reg. nut & lock.For 43 degree applications — wedge part #400-WDG-0700 is required.1" Morris shank - for NH3 knives 1/2" x 3" no lockwasher 1/2" x 2-3/4" no lockwasher Hex-Head, regular nut.1" Morris shank - for Gran. knives 1/2" x 3" no lockwasher 1/2" x 2-3/4" no lockwasher Hex-Head, regular nut.1-1/4" CIL shank - 2-1/2" hole c-c 1/2" x 3-1/4" c/w no lockwasher 1/2" x 2-3/4" no lockwasher Hex-Head, regular nut.1-1/4" IH shank 1/2" x 3-1/4" 1/2" x 3" Hex-Head bolt, reg. nut & lock. See note # 2 below3/4 Case IH vibra chisel shank 1/2" x 2-3/4" 1/2" x 2-1/2" Hex-Head bolt, reg. nut & lock.NOTES: 1) Some material may have to be ground off the bottom of the 1-1/4" Morris shank (front face) to get the knife holder to seat down tight against the shank. 2) The 1-1/4" IH shank will fit the NH3 knives, but not the Granular knife. 3) All knives come with holes to accommodate 1/2" bolts. If cultivator shanks have 7/16" holes, substitute 7/16" bolts for 1/2" and use a flat washer on the bolt head. Bolt length chartCommon Torque Value ChartBolt and Nut Part #'sUSS/SAE GRADE 8BOLT DIAMETERWRENCH SIZETORQUE DRY FT.LBS.LUBRICATED FT. LBS.1/4 7/16 12 95/16 1/2 24 183/8 9/16 45 357/16 5/8 70 501/2 3/4 110 809/16 13/16 150 1105/8 15/16 210 1603/4 1-1/8 380 2807/8 1-5/16 600 4501 1-1/2 910 680All highlighted values are common bolt sizes used for BTT products.This chart lists some of the more common bolt sizes and their calculated torque values. To ensure proper installation and the integrity of the bolts it is recommended that you follow t h e s e va l u e s . We h ave highlighted some of the more common sizes that our products will use. 101www.tillagetools.com ReferenceFastener InformationDESCRIPTION SIZE PART NUMBERLock Washer 1/2" 902-LWS-5000Nut - Grade 5 3/8" 904-NRG-3754Nut - Grade 5 7/16" 904-NRG-4374Nut - Grade 5 1/2" 904-NRG-5004Lock Nut - Stover 1/4" 906-NPT-2505Lock Nut - Stover 3/8" 906-NPT-3755Lock Nut - Stover 7/16" 906-NPT-4375Lock Nut - Stover 1/2" 906-NPT-5005Lock Nut - Nylon Insert 1/4" 908-NNI-2504Screw - Pan Head 3/8" 911-SCR-1038Screw - Self Drill 1/2" 911-SCR-1051Plow Bolt - O/S Hd Low Shld 3/8" x 1 1/2" 922-POL-1504Plow Bolt - O/S Hd Low Shld 3/8" x 1 3/4" 922-POL-1754Plow Bolt - O/S Hd Low Shld 3/8" x 2" 922-POL-2004Plow Bolt - O/S Hd 3/8" x 2 1/4" 922-POR-2254Plow Bolt - O/S Hd Low Shld 7/16" x 1 1/2" 924-POL-1504Plow Bolt - O/S Hd Low Shld 7/16" x 1 3/4" 924-POL-1754Plow Bolt - O/S Hd 7/16" x 2" 924-POR-2004Plow Bolt - O/S Hd 7/16" x 2 1/4" 924-POR-2254Plow Bolt - O/S Hd 7/16"x 2 1/2" 924-POR-2504Plow Bolt - O/S Hd 7/16" x 2 3/4" 924-POR-2754Plow Bolt - O/S Hd 7/16" x 3" 924-POR-3004Plow Bolt - O/S Hd 7/16" x 3 7/8" 924-POR-3874DESCRIPTION SIZE PART NUMBERPlow Bolt 1/2" x 1 3/4" 926-PRG-1754Plow Bolt 1/2" x 2" 926-PRG-2004Plow Bolt 1/2" x 2 1/4" 926-PRG-2254Plow Bolt 1/2" x 2 1/2" 926-PRG-2504Plow Bolt 1/2" x 2 3/4" 926-PRG-2754Plow Bolt 1/2" x 3" 926-PRG-3004Plow Bolt 1/2" x 3 1/2" 926-PRG-3504Hex Bolt - O/S Hd Shld Blt 7/16" x 1 3/4" 933-HOS-1754Hex Bolt - O/S Hd Shld Blt 7/16" x 2" 933-HOS-2004Hex Bolt 1/4" x 3/4" 942-HRG-0754Hex Bolt 1/4" x 2" 942-HRG-2004Hex Bolt 1/2" x 1 3/4" 946-HRG-1754Hex Bolt - Grade 8 1/2" x 2" 946-HRG-2005Hex Bolt - Grade 8 1/2" x 2 1/4" 946-HRG-2255Hex Bolt - Grade 8 1/2" x 2 1/2" 946-HRG-2505Hex Bolt 1/2" x 2 3/4" 946-HRG-2754Hex Bolt 1/2" x 3" 946-HRG-3004Hex Bolt 1/2" x 3 1/4" 946-HRG-3524Hex Bolt 1/2" x 3 1/2" 946-HRG-3504Carriage Bolt - Grade 8 3/8" x 2 1/4" 960-CRG-3755Carriage Bolt - Grade 8 1/2" x 2" 961-CRG-2005Carriage Bolt - Grade 8 1/2" x 2 1/4" 961-CRG-2255Carriage Bolt - Grade 8 1/2" x 2 1/2" 961-CRG-2505Legend: O/S Hd - Oversized HeadLow Shld - Low ShoulderShld Blt - Shoulder Bolt102 BTTDealers NORTH AMERICAN DEALERSAlbertaBALZAC, ABROCKY MOUNTAIN EQUIPMENT (403) 513-7000BARRHEAD, ABMARTIN DEERLINE (780) 674-2213BEAVERLODGE, ABFOSTER'S AGRI-WORLD (780) 354-3622BOW ISLAND, ABROCKY MOUNTAIN EQUIPMENT (403) 545-6844BROOKS, ABBROOKS FARM CENTRE (403) 362-8222CAMROSE, ABSELMAC SALES LTD (780) 672-2452CORONATION, ABFUTURE AG INC (403) 578-3747DRUMHELLER, ABROCKY MOUNTAIN EQUIPMENT (403) 823-2626FALHER, ABHOULDER AUTOMOTIVE LTD (780) 837-4691GRANDE PRAIRIE, ABDOUGLAS LAKE EQUIPMENT (780) 532-5344GRANDE PRAIRIE, ABNEUFELD PETROLEUM & PROPANE LTD (780) 814-6111GRIMSHAW, ABHOULDER AUTOMOTIVE LTD (780) 332-4691HIGH PRAIRIE, ABMARTIN DEERLINE (780) 526-4431HIGH RIVER, ABROCKY MOUNTAIN EQUIPMENT (403) 652-7944LA CRETE, ABPRAIRIE COAST EQUIPMENT (780) 928-3337LETHBRIDGE, ABROCKY MOUNTAIN EQUIPMENT (403) 327-3154MEDICINE HAT, ABROCKY MOUNTAIN EQUIPMENT (403) 528-3838MILK RIVER ABROCKY MOUNTAIN EQUIPMENT (403) 647-3828OLDS, ABFUTURE AG INC (403) 556-6711OYEN, ABROCKY MOUNTAIN EQUIPMENT (403) 664-3730PICTURE BUTTE, ABROCKY MOUNTAIN EQUIPMENT (403) 732-5658PONOKA, ABTOWN & COUNTRY SUPPLIES (780) 783-5555RED DEER, ABFUTURE AG INC (403) 343-6101RIMBEY, ABFUTURE AG (403) 843-2205ROCKYFORD, ABK. PEDERSEN EQUIPMENT LTD (403) 533-3757SEDALIA, ABSEDALIA CONSUMERS CO-OP (403) 326-2152SPIRIT RIVER, ABDAVE ROSS EQUIPMENT (780) 864-3731ST. PAUL, ABTRI-AG IMPLEMENTS (780) 645-4465STETTLER, ABFUTURE AG INC (403) 742-3740STONY PLAIN, ABSELMAC SALES LTD (780) 963-2251TABER, ABROCKY MOUNTAIN EQUIPMENT (403) 223-2333THORSBY, ABTHORSBY FARM CENTRE (780) 789-3989TROCHU, ABAGRO-TROCHU (403) 442-3982VEGREVILLE, ABROCKY MOUNTAIN EQUIPMENT (866) 632-6677VERMILION, ABIRELAND FARM EQUIPMENT LTD (780) 853-6344VULCAN, ABARMAN EQUIPMENT SALES INC (403) 485-6968WAINWRIGHT, ABTRI-AG IMPLEMENTS (780) 842-4408WASKATENAU, ABWASKATENAU MOTORS (780) 358-2287WESTLOCK, ABMARTIN DEERLINE (780) 349-3391WESTLOCK, ABROCKY MOUNTAIN EQUIPMENT (780) 349-3720British ColumbiaDAWSON CREEK, BCDOUGLAS LAKE EQUIPMENT (250) 782-5281ROLLA, BCROLLA AGRICULTURE SERVICES (250) 759-4770 ManitobaALTONA, MBGREENVALLEY EQUIPMENT INC (204) 324-6456ARBORG, MBSHACHTAY SALES & SERVICE (204) 376-5233BOISSEVAIN, MBROCKY MOUNTAIN EQUIPMENT (204) 534-2463BRANDON, MBROCKY MOUNTAIN EQUIPMENT (204) 725-2273CARMAN, MBGREENLAND EQUIPMENT LTD (204) 745-2054DAUPHIN, MBREIT-SYD FARM EQUIPMENT (204) 638-6443ELIE, MBCHABOT IMPLEMENTS CO LTD (204) 353-2392KILLARNEY, MBGREENVALLEY EQUIPMENT INC (204) 523-7571KILLARNEY, MBROCKY MOUNTAIN EQUIPMENT (204) 523-4644MANITOU, MBA.R.K. NEW-TECH LTD (204) 242-2424MORDEN, MBGREENVALLEY EQUIPMENT INC (204) 325-7742NEEPAWA, MBMAzERGROUP - NEEPAWA (204) 476-2364NEEPAWA, MBCHABOT IMPLEMENTS CO LTD (204) 476-3333PORTAGE LA PRAIRIE, MBCHABOT IMPLEMENTS CO LTD (204) 857-9397ROSENORT, MBROSENORT MOTORS (1979) LTD (204) 746-8441RUSSELL, MBMURRAY'S FARM SUPPLIES (204) 773-2644SHOAL LAKE, MBMURRAY'S FARM SUPPLIES (204) 759-2626STEINBACH, MBSOUTHEASTERN FARM EQUIP. LTD (204) 326-9834STEINBACH, MBCHABOT IMPLEMENTS LTD. (204) 326-6417SWAN RIVER, MBMAzERGROUP - SWAN RIVER (204) 734-9362TREHERNE, MBGREENVALLEY EQUIPMENT INC (204) 723-2546WINNIPEG, MBLEO'S SALES & SERVICE LTD (204) 694-4978SaskatchewanARCHERWILL, SKARCHERWILL CO-OP (306) 323-2112ASSINIBOIA, SKE. BOURASSA & SONS LTD (306) 642-3826AVONLEA, SKNELSON MOTORS & EQUIP. (1976) (306) 868-2022BALCARRES, SKMAPLE FARM EQUIPMENT (306) 334-2492CARROT RIVER, SKCARROT RIVER IMPLEMENTS (306) 768-2715CHAMBERLAIN, SKSCHROEDER BROS. IMPL. LTD (306) 638-6305CHOICELAND, SKPINELAND CO-OP (306) 428-2175DAVIDSON, SKYOUNGS EQUIPMENT (306) 567-3074DINSMORE, SKT.J. SERVICE LTD (306) 846-2152ELROSE, SKWESTERN SALES INC (306) 378-2575ESTEVAN, SKNELSON MOTORS & EQUIP. (1976) (306) 634-6422ESTEVAN, SKREDHEAD EQUIPMENT LTD (306) 634-4788FOAM LAKE, SKMAPLE FARM EQUIPMENT (306) 272-3345FRONTIER, SKPIONEER CO-OPERATIVE (306) 296-2233GRAVELBOURG, SKL&L AUTO & AG SUPPLIES (306) 648-3622HOOSIER, SKHOOSIER CO-OP (306) 838-4405HUMBOLDT, SKHERGOTT FARM EQUIPMENT LTD (306) 682-2591KAMSACK, SKNYKOLAISHEN FARM EQUIP. LTD (306) 542-2411KINDERSLEY, SKKRAMER LTD (306) 463-3797KINISTINO, SKAG WORLD EQUIPMENT (306) 864-2200KINISTINO, SKFARM WORLD EQUIPMENT LTD (306) 864-3667LEADER, SKJAY DEE AGTECH (306) 628-3899LLOYDMINSTER, SKMOODY'S EQUIPMENT (306) 825-6141MEADOW LAKE, SKLAzAR EQUIPMENT LTD (306) 236-5222MOOSE JAW, SKYOUNG'S EQUIPMENT (306) 694-1800MOOSOMIN, SKROCKY MOUNTAIN EQUIPMENT (306) 435-3866NAICAM, SKCROPPER MOTORS (306) 874-2011NEILBURG, SKNEILBURG CO-OP AGRO (306) 823-4841NORTH BATTLEFORD, SKKRAMER LTD (306) 445-6151OUTLOOK, SKWESTERN SALES INC (306) 867-8601OUTLOOK, SKJOHN BOB FARM EQUIPMENT LTD (306) 867-9544PARADISE HILL, SKNOVLAN BROTHERS (306) 344-2029PERDUE, SKMOODY'S EQUIPMENT (306) 237-4272PONTEIX, SKTHIBAULT'S AUTO PARTS PLUS (306) 625-3355PORCUPINE PLAIN, SKPARKLAND CO-OP (306) 278-2191PREECEVILLE, SKMAPLE FARM EQUIPMENT (306) 547-2007PRINCE ALBERT, SKFARM WORLD EQUIPMENT LTD (306) 922-2525RADVILLE, SKE. BOURASSA & SONS LTD (306) 869-2277RAYMORE, SKYOUNGS EQUIPMENT (306) 746-2288REDVERS, SKNELSON MOTORS & EQUIP. (1976) (306) 452-3418REGINA, SKYOUNG'S EQUIPMENT (306) 565-2405ROSETOWN, SKWESTERN SALES INC (306) 882-4291SASKATOON, SKMOODY'S EQUIPMENT (306) 934-4686SHAUNAVON, SKSHAUNAVON IND. (1980) LTD (306) 297-2630SPIRITWOOD, SKMARTODAM MOTORS (1983) LTD (306) 883-2045ST. BRIEUX, SKCOQUET & BOURGAULT IMPLTS (306) 275-2050SWIFT CURRENT, SKREDHEAD EQUIPMENT LTD (306) 773-2951TISDALE, SKJOHN BOB FARM EQUIPMENT LTD (306) 873-4588UNITY, SKMOODY'S EQUIPMENT (306) 228-2686WADENA, SKWHEATBELT SALES LTD (306) 338-2588WATROUS, SKA & S EQUIP. WATROUS (1978) LTD (306) 946-3387WEYBURN, SKYOUNG'S EQUIPMENT (306) 842-2629WINDTHORST, SKYOUNG'S EQUIPMENT (306) 224-2110WYNYARD, SKMAPLE FARM EQUIPMENT (306) 554-2536YORKTON, SKMAPLE FARM EQUIPMENT (306) 783-9459ColoradoYUMA, COMV EQUIPMENT (970) 848-5482WRAY, CO MV EQUIPMENT (970) 332-4143IdahoBOISE, IDWESTERN STATES EQUIPMENT CO (208) 888-2287IDAHO FALLS, IDWESTERN STATES EQUIPMENT CO (208) 552-3400POCATELLO, IDWESTERN STATES EQUIPMENT CO (208) 232-2640TWIN FALLS, IDWESTERN STATES EQUIPMENT CO (208) 734-7330IllinoisTAYLORVILLE, ILKUHNS EQUIPMENT COMPANY (217) 824-8146KansasGRAINFIELD, KSSHAW MOTOR CO. INC (785) 673-4228TOPEKA, KSINTERSTATE FARM PRODUCTS (785) 233-0869KALVESTA, KSKALVESTA IMPLEMENTS CO (620) 855-3567MinnesotaADA, MNTITAN MACHINERY INC (218) 784-2321ADAMS, MNFARM TECH (GPS SERVICES) (507) 582-1477CROOKSTON, MNCROOKSTON IMPLEMENTS CO (218) 281-3683EAST GRAND FORKS, MNAG PRO TECH (218) 779-1993FRANKLIN, MNFRANKLIN VALLEY SALES (507) 829-8909HILLS, MNDAVE'S REPAIR (507) 962-3631ROSEAU, MNTITAN MACHINERY INC (218) 463-1781THIEF RIVER FALLS, MNNELSON EQUIPMENT INC (218) 681-1997THIEF RIVER FALLS, MNTITAN MACHINERY (218) 681-1423MissouriMEXICO, MOSYDENSTRICKER IMPLEMENT CO (573) 581-5900 TIPTON, MOSYDENSTRICKER IMPLEMENT CO (660) 433-5596MontanaBILLINGS, MTTORGERSON'S LLC (406) 252-8614 BLACK EAGLE, MTFRIELING'S AG EQUIP (406) 453-2924CHINOOK, MTRAINBOW IRRIGATION (406) 357-2211CIRCLE, MTFARM EQUIPMENT SALES (406) 485-2145CONRAD, MTFRONTLINE AG (406) 278-5531CULBERTSON MTFARM EQUIPMENT SALES INC (406) 787-6201CUT BANK, MTFRONTLINE AG (406) 873-5505ETHRIDGE, MTTORGERSON'S LLC (406) 339-2222GLASGOW, MTFARM EQUIPMENT SALES INC (406) 228-2496GREAT FALLS, MTHOVEN EQUIPMENT COMPANY (406) 727-7153GREAT FALLS, MTTORGERSON'S LLC 406-453-1453HAVRE, MTTILLEMAN MOTOR CO (406) 265-7865HAVRE, MTTORGERSON'S LLC (406) 265-5887LEWISTON, MTTORGERSON'S LLC 406-538-8795PLENTYWOOD, MTFARM EQUIPMENT SALES INC (406) 765-1531SIDNEY, MTSUNRISE EQUIPMENT CO (406) 488-3112North DakotaBEACH, NDWEST PLAINS INC (701) 872-4154BOWMAN, NDWEST PLAINS INC (701) 523-3296CALVIN, NDFARMER'S UNION OIL COMPANY (701) 697-5208CARRINGTON, NDERICKSON IMPLEMENT INC (701) 652-2821CASSELTON, NDTITAN MACHINERY INC (701) 347-4671DEVIL'S LAKE, NDHIGH PLAINS EQUIPMENT (701) 662-7522DEVIL'S LAKE, NDLEADING EDGE EQUIPMENT (701) 662-4948 DICKINSON, NDDAKOTA FARM EQUIPMENT INC (701) 225-8123DICKINSON, NDWEST PLAINS INC (701) 483-8741HETTINGER, NDWEST PLAINS INC (701) 567-4505103www.tillagetools.com ReferenceWUDINNAPRINGLES AG+ CROUCH RURAL T: 08 8680 2236VictoriaBIRCHIPO'CONNOR & SONS T: 03 5492 2311DELCOMBEWESTAG T: 03 5335 8609HORSHAMO'CONNOR & SONS T: 03 5382 1727MILDURAHAEUSLER FARM SUPPLIES T: 03 5055 0600SEA LAKEHAEUSLER FARM SUPPLIES T: 03 5070 3400SHEPPARTONO'CONNOR & SONS T: 03 5821 4555SWAN HILLSUNRISE AG T: 03 5032-0099WARRACKNABEALO'CONNOR & SONS T: 03 5398 1877Western AustraliaALBANYRATTEN & SLATER T: 08 9842 8529BOYUP BROOKGREENLINE AG T: 08 9765 1305New South WalesCOLEAMBALLYHUTCHEON A & G T: 02 6954 4280CONDOBOLINHUTCHEON AND PEARCE T: 02 6895-2666COONAMBLECHESTERFIELD AUSTRALIA T: 02 6822 5111COROWAO'CONNER & SONS T: 02 6033 1666COWRAHUTCHEON & PEARCE T: 02 6341 4800DUBBOCHESTERFIELD AUSTRALIA T: 02 6885 3300FORBESMCCLINTOCK & CO T: 02 6852 1200GRENFELLMCCLINTOCK & CO T: 02 6343 1422GRIFFITHA & G MACHINERY T: 02 6964 3422LAKE CARGELLIGOA & G MACHINERY T: 02 6898 1305MOREESUSTAIN AG T: 02 6752 1622NARRANDERAHUTCHEON A & G T: 02 6959 1522PARKESHUTCHEON & PEARCE T: 02 6862-1666TEMORAHUTCHEON AND PEARCE T: 02 6977 1100WAGGA WAGGAHUTCHEON AND PEARCE T: 02 6933 7900WARRENCHESTERFIELD AUSTRALIA T: 02 6847 3522 WELLINGTONCHESTERFIELD AUSTRALIA T: 02 6845 1666WYALONGWYALONG MACHINERY & ENGINEERING T: 02 6972-4555South AustraliaBORDERTOWNO'CONNOR & SONS T: 08 8752 1311CEDUNACEDUNA MACHINERY T: 08 8625 2999CLAREWSB DISTRIBUTORS T: 08 8842 2177CLEVEPRINGLES AG+ CROUCH RURAL T: 08 8628 2150CRYSTAL BROOKPRINGLES AG+ CROUCH RURAL T: 08 8636 2257CUMMINSPRINGLES AG+ CROUCH RURAL T: 08 8676 2105JAMESTOWNWSB DISTRIBUTORS T: 08 8664 0101KADINAMEASEDAY'S SERVICES T: 08 8828-0200KIMBAPRINGLES AG+ CROUCH RURAL T: 08 8627 2071LYNDOCHLYNDOCH MOTORS T: 08 8524 4140MAITLANDEGLINTON BROS T: 08 8832 2277MURRAY BRIDGERAMSEY BROS. T: 08 8531 2244PARINGAHOODS AGRIMOTIVE T: 08 8595 5388PINNAROOPARK MOTORS T: 08 8577 8141CARNAMAHWALTONS T: 08 9951 1130CUNDERDINAG IMPLEMENTS T: 08 9635 1364DALWALLINUJOLLY & SONS T: 08 9661 1105ESPERANCEPH KERR & CO T: 08 9071 3711GERALDTONWALTONS T: 08 9921 5044GNOWANGERUPRATTEN SLATER T: 08 9827 1207GUILDFORDGREENLINE AG T: 08 9478 5099LAKE GRACEGREENLINE AG T: 08 9865 1100MERREDINAG IMPLEMENTS T: 08 9041 4100MOORAWALTONS T: 08 9651-1363MUKINBUDINAG IMPLEMENTS T: 08 9047 1109NAREMBEENAG IMPLEMENTS T: 08 9064 7214NARROGINGREENLINE AG T: 08 9881 4250NORTHAMAG IMPLEMENTS T: 08 9622 5855PINGELLYGREENLINE AG T: 08 9887 1395SOUTHERN CROSSAG IMPLEMENTS T: 08 9049 1104WAGINGREENLINE AG T: 08 9861-0000WONGAN HILLSJOLLY & SONS T: 08 9671 1311WYALKATCHEMJOLLY & SONS T: 08 9681-1477EUROPEAN DISTRIBUTORS:Industriehof GmbHIm Winkel 5 D-30900 Wedemark Germany Ph: +49 (0) 5130-6072-0website: www.industriehof.comMartin Lishman Ltd. Unit 2B, Roman Bank, Bourne, Lincs PE10 9LQ UK Ph: +44 (0) 1778 426600 website: www.martinlishman.comAUSTRALIAN DISTRIBUTORBourgault Industries16 Eliot Road Armadale, WA 6112 Australia Ph: (08) 9399 9700Parkes Distribution Centre 17 Matthews Street Parkes, NSW 2670 Australia Ph: (02) 6863 5177HOOPLE, NDBUTLER MACHINERY CO (701) 894-6363JAMESTOWN, NDTITAN MACHINERY INC (701) 252-8200KULM, NDTITAN MACHINERY INC (701) 647-2442LANGDON, NDSIMPLOT SOILBUILDERS (701) 256-2815LISBON, NDBERUBES INC (701) 683-4195MAKOTI, NDRENSCH GARAGE INC (701) 726-5698MANDAN, NDNORTHERN PLAINS EQUIPMENT (701) 663-9864MINOT, NDFARMER’S UNION OIL COMPANY (ENERBASE) (701) 852-2501MOHALL, NDGREEN AG SERVICES (701) 756-6050ROLETTE, NDFARMER'S UNION OIL COMPANY (701) 246-3493SAWYER, NDHAUSER'S FARM SUPPLY (701) 624-5310STANLEY, NDSTANLEY EQUIPMENT INC (701) 628-2950VALLEY CITY, NDA P EQUIPMENT (701) 845-2143WAHPETON, NDTITAN MACHINERY INC (701) 642-8424WASHBURN, NDR D O EQUIPMENT (701) 462-3284WILLISTON, NDBOLDT FARM SUPPLY (701) 774-3739WILLISTON, NDFRONTIER EQUIPMENT (701) 774-0957NebraskaKIMBALL, NEBRIGHTON EQUIPMENT (308) 235-3683SCOTT BLUFF, NEFRANK IMPLEMENT CO (308) 632-4440 OklahomaENID, OKENID NEW HOLLAND (580) 234-2668OregonPENDLETON, ORWESTERN STATES EQUIPMENT CO (541) 276-5812AUSTRALIAN DEALERS:South DakotaONIDA, SDLAMB'S CHEVROLET & IMPLEMENT (605) 258-2661REDFIELD, SDTITAN MACHINERY INC (605) 472-0810TexasWINTERS, TXMILTON'S HARDWARE & AUTO SUPPLY (325) 754-4578WashingtonPASCO, WAWESTERN STATES EQUIPMENT CO (509) 547-9541ROSALIA, WAJERRY'S FARM SUPPLY (509) 523-3276SPOKANE, WASPRAY CENTER ELECTRONICS INC (509) 838-2209SPOKANE, WAWESTERN STATES EQUIPMENT CO (509) 535-1744WyomingCHEYENNE, WYWYOMING EQUIPMENT (307) 638-8669Contact UsPhone: 1-800-878-7714 • Fax: 1-306-275-4720info@tillagetools.com • www.tillagetools.comP.O. Box 310, 200 5th Ave South St. Brieux, SK. Canada S0K 3V0Connect with Us104 BTTYour Contacts for Sales, Service and Product DevelopmentCornelius ChomenchukAssistant Sales Manager/ Manitoba Territory ManagerPenny ulledalSales CoordinatorPatrick YeagerManaging Director of Sales & Marketinglarry MortensonSaskatchewan Territory ManagerKelly stevensonSales Representativeroger schiermanAlberta Territory Managerlen HorvathService and Warranty Managerdean BigelowNew Product Development Managertim BodvarsonMarketing ManagerF. P. Bourgault tillage tools ltd. (Btt) P.O. BOx 310 - 200 5th Ave SOuth St. Brieux, Sk. CAnAdA S0k 3v0PH: 1 800 878 7714 • Fax: (306) 275 4720 www.tillagetools.comBTT is a registered trademark of F.P. Bourgault Tillage Tools Ltd.Printed in Canada. 10.12