Rambler - Sprayer Handbook - Operating Instructions Manual

The RAMBLER sprayer has been factory tested prior to packing and only requires the handles and the spray boom assembly to be fitted. Fit the handlebars into position using the nuts, bolts and washers from the fixing bag. The boom assembly can be fitted to the main frame in two positions. The upper position should be suitable for most purposes. Take the boom assembly and attach it to the main frame by using the clamps. The boom is marked showing its centre position, and this should be carefully aligned into the centre of the fixing clamp. BEFORE tightening the clamp the machine should be lifted into its normal working position and the boom nozzles checked to ensure they are parallel to the ground. Adjust the boom position and rotation as necessary, re-check, then tighten the clamp fixings. Attach the inlet wing nut to the boom inlet housing. The machine is now ready for testing.