SI Distributing Inc Catalog- Brochure

Prices & sPecifications: Prices andspecifications are subject to change without notice. All shipments are billed at the price prevailing at the time of shipment. All prices are F.O.B. Spencerville, Ohio.terms: A satisfactory credit reference must be furnished before shipment can be made. Initial orders will be shipped C.O.D., or credit card until a credit line is established. All dealers are required to have a blanket certificate of exemption form for general sales tax on file with us. Any checks returned because of insufficient funds will be charged $25 per occurrance.orders: Phone orders may be placed by calling 800-368-7773.Orders may be mailed to: S.I. Distributing Inc. 13540 Spencerville Road Spencerville, Ohio 45887Orders may be faxed to: 877-398-8074Orders may be emailed to: order@sidist.comFor best service please fax or email orders to guarantee accuracy.shiPment: All orders will be shipped in the order they are received. Most orders are shipped the same day if they are received before 12:00 p.m. EST. Orders can be shipped UPS ground, UPS second day air, UPS next day air, or any other available means. Orders will be shipped UPS ground unless specified differently by the customer. Truck freight will be used when price competitive to UPS. Shipments to an address other than the billing address will be charged an additional $10.00 drop ship charge. An expedited order charge of $10.00 will be added to all orders received after 12:00 p.m. that request same day shipment by ground.shortages & damages: S.I. Distributing Inc. is not responsible for goods damaged or lost in transit. All claims of freight shortages and/or damages must be noted on the bill of lading or with the driver at the time of delivery. Failure to note any freight shortages and/or damages makes the consignee responsible for all shortages and/or damages to that shipment. S.I. Distributing Inc. will assist the consignee in filing freight shortage and/or damage claims when the consignee noted such at time of delivery.return Policy: Any merchandise being returned must have a Return Goods Authorization number (RGA#) printed clearly on the outside of the box. A Return Goods Authorization number can be obtained by calling S.I. Distributing Inc. Authorized returns must be returned freight prepaid and will be subject to a minimum restocking charge of 15%. A copy of the original sales invoice must be included with all returns. No exceptions. An additional charge will be made if the merchandise is received in less than saleable condition. All merchandise shipped to S.I. Distributing without prior authori-zation is subject to refusal and may be returned freight collect. Warranty returns must fully explain the nature of the defect and the Return Goods Authorization number must be present.s.i. distributing inc. would like to thank you for your business.Successful Innovations describes the type of prod-ucts that we offer. Our goal is to provide the best service and quality products for your dealership and your customers. This is our 2014 catalog, which we publish at the beginning of each year. If you would like additional copies of our catalog, or if we can be of any assistance, please feel free to call 800-368-7773 and ask for any member of our friendly staff.VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 11Martin Planting Attachments ........................................15-20Mojo Wire .................................................................................... 37Montezuma Toolboxes .....................................................77-79Mur-Lok Fittings ........................................................................ 37Needham Ag V8 Firming Wheel .......................................... 32NH3 Disc Sealer ......................................................................... 32One Wrench ................................................................................ 22Parallel Linkage Rebuild Kits ................................................ 28Planter Pivot Arm Kits ............................................................. 23Planter Replacement Parts .................................................... 12Plastic Wear Blocks ................................................................... 42Postboxx Mailbox ..................................................................... 73Precision Meter ............................................................................8Precision Meter Parts .................................................................9Quick Crank Trash Whipper Adjuster ................................. 21Quick Finger ............................................................................... 42Rasspe Knife Assemblies ........................................................ 70Rasspe Guards ........................................................................... 71Radura Disc Mower Blades .................................................... 51SCH EasyCut II Cutting System ......................................52-53SCH EasyCut II Kits ..............................................................54-60SCH EasyCut II Parts ...........................................................62-63SCH EasyCut II Knifeheads ...............................................64-66SCH EasyCut II Knife Assemblies ......................................... 61SCH Pro-Drive Kits .................................................................... 69SCH Pro-Drive Knife Drive ...............................................67-68SCH Pro-Flex Lifter................................................... 63Schuck Cushion Hitches ...................................................74-75Seed Level Indicator ................................................................ 22Shield Ag Drill Discs ................................................................. 31S.I. Belt Meter ............................................................................2-3S.I. Belt Meter Kits ....................................................................4-7S.I. Belt Meter Parts .....................................................................7S.I. Distributing Show Schedule .......................................... 80Spring Compression Spacers ............................................... 33Sure Mark Marker Weights .................................................... 27Sure Stop ..................................................................................... 44Swift Hitch ................................................................ 74Tractor Safety Lights ................................................................ 73Trail-Jet Fertilizer Opener ...................................................... 30Trash Guard ................................................................................ 27V-Closing Wheel Bracket for Case IHand White Planters ................................................................... 23VenHuizen AccuVac Kit .......................................................... 13WaveVision Seed Tube ............................................................ 11Table of ConTenTsBold Type indicates New Products for 2014Acra-Plant Blu-Jet Parts .......................................................... 40Acra-Plant Conservation Ripper Points ............................ 41Acra-Plant Fertilizer Knives ................................................... 40Acra-Plant Notched Disc Openers ...................................... 39Acra-Plant Quick Change Fertilizer Knives ...................... 41Acra-Plant V-Slice Inserts ....................................................... 38Acre Plus Seed Box Topper .................................................... 26Air Design Drill Scrapers ........................................................ 26Air Design Planter Scrapers .................................................. 26Boule Cristal Strobe Light ...................................................... 72Bullseye Seed Tube .................................................................. 10Burvee Bubble-Up Auger ...................................................... 48Calmar Auger Spout ................................................................ 49Case-IH Replacement Cutting Parts ..................70-71Cast-Iron Closing Wheels ....................................................... 25CleanSweep ................................................................................ 14Close-N-Till Cast Wheels ......................................................... 25Closing Wheel Brackets .......................................................... 24Depth-A-Matic ........................................................................... 21Down Pressure Spring Package........................................... 28Ergo Hitch.................................................................................... 76Finger-Till Cast Wheels ............................................................ 25Gauge Wheel Cover ................................................................. 27HCC Flip Reel Kit........................................................................ 49HCC Gateway Sieves & Chaffers .......................................... 45HCC Orbit Trac II Reel Kit ........................................................ 46HCC Paddle Tines ...................................................................... 43HCC Complete Orbit Trac II Reel .......................................... 47HCC Replacement Reel Tines ............................................... 44HCC Smart Till Replacement Parts ...................................... 72Insecticide Skirt ......................................................................... 30John Deere Replacement Cutting Parts ............70-71John Deere Seed Boots .......................................................... 33John Deere Stabilizer Kit ........................................................ 69Keeton Seed Firmers .........................................................34-36Kinze Brush Meter Adapter ................................................... 22Leatherman Tools ..................................................................... 73Lockease Hitch Pin ................................................................... 76M3 Monitor System ................................................................. 29MagnoJet Spray Nozzles ......................................... 50Planting Products ...............................................2-41Harvesting Products ....................................... 42-71Other Products ................................................. 72-79S.I. Distributing Show Schedule ......................... 80800.368.7773CALL TOLL-FREE TO ORDER TODAY.2Features:• The S.I. Belt Meter allows the operator to seed with one setting at a determined rate of flow for most seed sizes• A regular even rate of seed flowing from the meter at all times• Seed damage at the meter is greatly reduced or eliminated• There is a positive setting by adjusting meter speed• The flow rate remains constant up to 10 mph• Plants soybeans, wheat and oatsInformation:Now you can plant the seed population per acre you choose without guessing. Accurate population control is possible even on large seed crops such as soybeans. The S.I. Belt Meter, when mounted on a grain drill, will singulate the seed and maintain accurate population control over a wide range of seed sizes (2,000 to 4,000 actual seeds per pound).The S.I. Belt Meter will plant a known number of seeds for every revolution of the drill shaft. Population rate changes are simply made by using a planter-type rate transmission (chart and sprockets provided) that changes the ratio between the ground drive wheel and the drill drive shaft. Changes in seed size do not affect the planting rate as most fluted type grain drill meters do.Seed flow is greatly improved over all other current designs of grain drill meters. A constant stream of seed flows out the S.I. Belt Meter at any operating speed. Accordingly, a more even flow of seed creates the opportunity for more even spacing in the seed trench.The S.I. Belt Meter is designed to primarily plant the following crops: Soybeans at 2,000 to 4,000 actual seeds per pound, wheat and oats. The S.I. Belt Meter is not designed (and does not work well) on crops planted at low rate or of a non-symmetrical shape such as milo/sorghum, corn, sunflower, cotton and edible beans.Any guess work in setting rate is eliminated. For most seed sizes, the meter will plant your seed at the rate you establish.The conversion pays for itself through seed savings and virtually eliminating seed damage.The S.I. Belt Meter adapts to most John Deere, Great Plains and Case-IH grain drills.The First Significant Technology Change In Grain Drill Meters In DecadesBenefits:• You save money due to no over seeding• You make money due to no under seeding• Any variation in seeding rate is eliminatedWilliam Romans, the inventor of the S.I. Belt Meter, was awarded the 2005 Iowa Inventor of the Year for his innovative contributions for seed and chemical metering devices. Mr. Romans recognized the problem of measuring seed sowed by grain drills and developed the S.I. Belt Meter to replace the conventional fluted feed wheel. With ever increasing seed costs there is more of a necessity to only plant the population you desire and no more. In addition, the S.I. Belt Meter delivers the same number of seeds with each revolution so re-calibrating is not necessary when changing to a different seed size or variety.John Deere TransmissionGreat Plains TransmissionCase-IH Transmissions.i. belT MeTerVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 3Measured row-to-row variation in seeding rate produced by a grain drill equipped with a standard fluted-wheel feed system. Due to the row-to-row variationproduced by a fluted-feed grain drill, Purdue researchers examined analternative metering approach. A belt-type metering system that could be fitted to a conventional grain drill was shown to reduce row-to-row variation in grain drill seed delivery during calibration. (Individual belt units replaced eachfluted-feed mechanism on a grain drill.) Field plots confirmed that the belt-type metering system produces a significant (37 percent) reduction in plant stand variation.Measured row-to-row variation in seeding rate produced by a grain drillequipped with a belt metering system.DisclaimerMention of any specific trade names within this publication does not represent a productendorsement on the part of Purdue University or any of its employees.AuthorsStephen E. Hawkins, assistant director, Purdue Ag Centers, Agricultural Research Programs, Purdue University Daniel R. Ess, associate professor, Department of Agricultural and Biological Engineering, Purdue UniversityCall for Pricing and availability of Makes and Models not listed.Important: The S.I. Belt Meter is not designed nor will it work properly when planting soybeans that are larger than 2,000 actual seeds per pound. Soybeans must be properly graded so as to not contain soybeans that are larger than 2,000 actual seeds per pound.Larger beans such as tofu and edible beans generally will not work with the S.I. Belt Meter because of the size of the bean.All kits include: • S.I. Belt Meter for each opener• Transmission conversion kit(s)• New seed charts• Installation instructions• Extra belt meter, cutoff brush, cotter pinIllustration of the differences in construction between conventional fluted-wheel and belt-type metering systems.s.i. belT MeTers.i. belT MeTer KiTsEach Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin800.368.7773CALL TOLL-FREE TO ORDER TODAY.4John Deere Belt Meter KitsProduct ID Description Make Model Width Spacing Meters Drives Lift Kit PriceBMK12560455 Belt Meter Kit-JD455 25’ 6” John Deere 455 25’ 6” 49 2 0 $4,696.00BMK12575455 Belt Meter Kit-JD455 25’ 7.5” John Deere 455 25’ 7.5” 40 2 0 $4,029.00BMK12510455 Belt Meter Kit-JD455 25’ 10” John Deere 455 25’ 10” 30 2 0 $3,292.00BMK12515455 Belt Meter Kit-JD455 25’ 15” John Deere 455 25’ 15” 20 2 0 $2,555.00BMK13060455 Belt Meter Kit-JD455 30’ 6” John Deere 455 30’ 6” 60 3 0 $6,044.00BMK13075455 Belt Meter Kit-JD455 30’ 7.5” John Deere 455 30’ 7.5” 48 3 0 $5,160.00BMK13010455 Belt Meter Kit-JD455 30’ 10” John Deere 455 30’ 10” 36 3 0 $4,275.00BMK13015455 Belt Meter Kit-JD455 30’ 15” John Deere 455 30’ 15” 24 3 0 $3,391.00BMK13575455 Belt Meter Kit-JD455 35’ 7.5” John Deere 455 35’ 7.5” 56 3 0 $5,749.00BMK13510455 Belt Meter Kit-JD455 35’ 10” John Deere 455 35’ 10” 42 3 0 $4,717.00BMK11075750 Belt Meter Kit-JD750 10’ 7.5” John Deere 750 10’ 7.5” 16 1 0 $1,720.00BMK11010750 Belt Meter Kit-JD750 10’ 10” John Deere 750 10’ 10” 12 1 0 $1,425.00BMK11015750 Belt Meter Kit-JD750 10’ 15” John Deere 750 10’ 15” 8 1 0 $1,130.00BMK11575750 Belt Meter Kit-JD750 15’ 7.5” John Deere 750 15’ 7.5” 24 1 0 $2,310.00BMK11510750 Belt Meter Kit-JD750 15’ 10” John Deere 750 15’ 10” 18 1 0 $1,867.00BMK11515750 Belt Meter Kit-JD750 15’ 15” John Deere 750 15’ 15” 12 1 0 $1,425.00BMK12075750 Belt Meter Kit-JD750 20’ 7.5” John Deere 750 20’ 7.5” 32 2 0 $3,440.00BMK12010750 Belt Meter Kit-JD750 20’ 10” John Deere 750 20’ 10” 24 2 0 $2,850.00BMK12015750 Belt Meter Kit-JD750 20’ 15” John Deere 750 20’ 15” 16 2 0 $2,260.00BMK13075750 Belt Meter Kit-JD750 30’ 7.5” John Deere 750 30’ 7.5” 48 2 0 $4,619.00BMK13010750 Belt Meter Kit-JD750 30’ 10” John Deere 750 30’ 10” 36 2 0 $3,735.00BMK13015750 Belt Meter Kit-JD750 30’ 15” John Deere 750 30’ 15” 24 2 0 $2,850.00BMK115751520 Belt Meter Kit-JD1520 15’ 7.5” John Deere 1520 15’ 7.5” 24 1 0 $2,310.00BMK120751520 Belt Meter Kit-JD1520 20’ 7.5” John Deere 1520 20’ 7.5” 32 2 0 $3,440.00BMK120101520 Belt Meter Kit-JD1520 20’ 10” John Deere 1520 20’ 10” 24 2 0 $2,850.00BMK115151530 Belt Meter Kit-JD1530 15’ 15” John Deere 1530 15’ 15” 12 1 0 $1,425.00BMK120151530 Belt Meter Kit-JD1530 20’ 15” John Deere 1530 20’ 15” 16 1 0 $1,720.00BMK110751560 Belt Meter Kit-JD1560 10’ 7.5” John Deere 1560 10’ 7.5” 16 1 0 $1,720.00BMK110151560 Belt Meter Kit-JD1560 10’ 15” John Deere 1560 10’ 15” 8 1 0 $1,130.00BMK115751560 Belt Meter Kit-JD1560 15’ 7.5” John Deere 1560 15’ 7.5” 24 1 0 $2,310.00BMK115101560 Belt Meter Kit-JD1560 15’ 10” John Deere 1560 15’ 10” 18 1 0 $1,867.00BMK115151560 Belt Meter Kit-JD1560 15’ 15” John Deere 1560 15’ 15” 12 1 0 $1,425.00BMK120751560 Belt Meter Kit-JD1560 20’ 7.5” John Deere 1560 20’ 7.5” 32 2 0 $3,440.00BMK120101560 Belt Meter Kit-JD1560 20’ 10” John Deere 1560 20’ 10” 24 2 0 $2,850.00BMK120151560 Belt Meter Kit-JD1560 20’ 15” John Deere 1560 20’ 15” 16 2 0 $2,260.00BMK130751560 Belt Meter Kit-JD1560 30’ 7.5” John Deere 1560 30’ 7.5” 48 2 0 $4,619.00BMK130101560 Belt Meter Kit-JD1560 30’ 10” John Deere 1560 30’ 10” 36 2 0 $3,735.00BMK130151560 Belt Meter Kit-JD1560 30’ 15” John Deere 1560 30’ 15” 24 2 0 $2,850.00BMK110751590 Belt Meter Kit-JD1590 10’ 7.5” John Deere 1590 10’ 7.5” 16 1 0 $1,720.00BMK110151590 Belt Meter Kit-JD1590 10’ 15” John Deere 1590 10’ 15” 8 1 0 $1,130.00BMK115751590 Belt Meter Kit-JD1590 15’ 7.5” John Deere 1590 15’ 7.5” 24 1 0 $2,310.00BMK115101590 Belt Meter Kit-JD1590 15’ 10” John Deere 1590 15’ 10” 18 1 0 $1,867.00BMK115151590 Belt Meter Kit-JD1590 15’ 15” John Deere 1590 15’ 15” 12 1 0 $1,425.00BMK120751590 Belt Meter Kit-JD1590 20’ 7.5” John Deere 1590 20’ 7.5” 32 2 0 $3,440.00BMK120101590 Belt Meter Kit-JD1590 20’ 10” John Deere 1590 20’ 10” 24 2 0 $2,850.00BMK120151590 Belt Meter Kit-JD1590 20’ 15” John Deere 1590 20’ 15” 16 2 0 $2,260.00Continued on next pages.i. belT MeTer KiTsEach Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter PinVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 55John Deere Belt Meter Kits - ContinuedProduct ID Description Make Model Width Spacing Meters Drives Lift Kit PriceBMK130751590 Belt Meter Kit-JD1590 30’ 7.5” John Deere 1590 30’ 7.5” 48 2 0 $4,619.00BMK130101590 Belt Meter Kit-JD1590 30’ 10” John Deere 1590 30’ 10” 36 2 0 $3,735.00BMK130151590 Belt Meter Kit-JD1590 30’ 15” John Deere 1590 30’ 15” 24 2 0 $2,850.00Great Plains Belt Meter Kits*Product ID Description Make Model Width Spacing Meters Drives Lift Kit PriceBMK212601200 Belt Meter Kit-GP1200 12’ 6” Great Plains 1200 12’ 6” 24 1 0 $2,310.00BMK212701200 Belt Meter Kit-GP1200 12’ 7” Great Plains 1200 12’ 7” 20 1 0 $2,015.00BMK212751200 Belt Meter Kit-GP1200 12’ 7.5” Great Plains 1200 12’ 7.5” 19 1 0 $1,944.00BMK212801200 Belt Meter Kit-GP1200 12’ 8” Great Plains 1200 12’ 8” 18 1 0 $1,867.00BMK212101200 Belt Meter Kit-GP1200 12’ 10” Great Plains 1200 12’ 10” 14 1 0 $1,572.00BMK212701205 Belt Meter Kit-GP1205 12’ 7” Great Plains 1205 12’ 7” 20 1 0 $2,015.00BMK212701210 Belt Meter Kit-GP1210 12’ 7” Great Plains 1210 12’ 7” 20 1 1 $2,179.00BMK212751210 Belt Meter Kit-GP1210 12’ 7.5” Great Plains 1210 12’ 7.5” 19 1 1 $2,108.00BMK212801210 Belt Meter Kit-GP1210 12’ 8” Great Plains 1210 12’ 8” 18 1 1 $2,031.00BMK212101210 Belt Meter Kit-GP1210 12’ 10” Great Plains 1210 12’ 10” 14 1 1 $1,736.00BMK215601500 Belt Meter Kit-GP1500 15’ 6” Great Plains 1500 15’ 6” 30 1 0 $2,752.00BMK215701500 Belt Meter Kit-GP1500 15’ 7” Great Plains 1500 15’ 7” 26 1 0 $2,457.00BMK215751500 Belt Meter Kit-GP1500 15’ 7.5” Great Plains 1500 15’ 7.5” 24 1 0 $2,310.00BMK215801500 Belt Meter Kit-GP1500 15’ 8” Great Plains 1500 15’ 8” 22 1 0 $2,162.00BMK215101500 Belt Meter Kit-GP1500 15’ 10” Great Plains 1500 15’ 10” 18 1 0 $1,867.00BMK215151500 Belt Meter Kit-GP1500 15’ 15” Great Plains 1500 15’ 15” 12 1 0 $1,425.00BMK215161500 Belt Meter Kit-GP1500 15’ 16” Great Plains 1500 15’ 16” 12 1 0 $1,425.00BMK215701510 Belt Meter Kit-GP1510 15’ 7” Great Plains 1510 15’ 7” 26 1 1 $2,621.00BMK215751510 Belt Meter Kit-GP1510 15’ 7.5” Great Plains 1510 15’ 7.5” 24 1 1 $2,473.00BMK215801510 Belt Meter Kit-GP1510 15’ 8” Great Plains 1510 15’ 8” 22 1 1 $2,326.00BMK215101510 Belt Meter Kit-GP1510 15’ 10” Great Plains 1510 15’ 10” 18 1 1 $2,031.00BMK220602000 Belt Meter Kit-GP2000 20’ 6” Great Plains 2000 20’ 6” 40 2 0 $4,029.00BMK220702000 Belt Meter Kit-GP2000 20’ 7” Great Plains 2000 20’ 7” 34 2 0 $3,587.00BMK220752000 Belt Meter Kit-GP2000 20’ 7.5” Great Plains 2000 20’ 7.5” 32 2 0 $3,440.00BMK220802000 Belt Meter Kit-GP2000 20’ 8” Great Plains 2000 20’ 8” 30 2 0 $3,292.00BMK220102000 Belt Meter Kit-GP2000 20’ 10” Great Plains 2000 20’ 10” 24 2 0 $2,850.00BMK220142000 Belt Meter Kit-GP2000 20’ 14” Great Plains 2000 20’ 14” 17 2 0 $2,337.00BMK220152000 Belt Meter Kit-GP2000 20’ 15” Great Plains 2000 20’ 15” 16 2 0 $2,260.00BMK220702010 Belt Meter Kit-GP2010 20’ 7” Great Plains 2010 20’ 7” 34 2 1 $3,751.00BMK220752010 Belt Meter Kit-GP2010 20’ 7.5” Great Plains 2010 20’ 7.5” 32 2 1 $3,604.00BMK220802010 Belt Meter Kit-GP2010 20’ 8” Great Plains 2010 20’ 8” 30 2 1 $3,456.00BMK220102010 Belt Meter Kit-GP2010 20’ 10” Great Plains 2010 20’ 10” 24 2 1 $3,014.00BMK220152015 Belt Meter Kit-GP2015 20’ 15” Great Plains 2015 20’ 15” 16 2 0 $2,260.00BMK224602400 Belt Meter Kit-GP2400 24’ 6” Great Plains 2400 24’ 6” 48 2 0 $4,619.00BMK224702400 Belt Meter Kit-GP2400 24’ 7” Great Plains 2400 24’ 7” 40 2 0 $4,029.00BMK224752400 Belt Meter Kit-GP2400 24’ 7.5” Great Plains 2400 24’ 7.5 38 2 0 $3,882.00BMK224802400 Belt Meter Kit-GP2400 24’ 8” Great Plains 2400 24’ 8” 36 2 0 $3,735.00BMK224102400 Belt Meter Kit-GP2400 24’ 10” Great Plains 2400 24’ 10” 28 2 0 $3,145.00BMK224152400 Belt Meter Kit-GP2400 24’ 15” Great Plains 2400 24’ 15” 19 2 0 $2,484.00Note: For Great Plains, need model number, serial number and if the drill has parallel linkage or markers. Continued on next pages.i. belT MeTer KiTsEach Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter Pin800.368.7773CALL TOLL-FREE TO ORDER TODAY.6s.i. belT MeTer KiTsEach Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter PinGreat Plains Belt Meter Kits - ContinuedProduct ID Description Make Model Width Spacing Meters Drives Lift Kit PriceBMK224752410 Belt Meter Kit-GP2410 24’ 7.5” Great Plains 2410 24’ 7.5” 38 2 1 $4,046.00BMK224802410 Belt Meter Kit-GP2410 24’ 8” Great Plains 2410 24’ 8” 36 2 1 $3,898.00BMK224102410 Belt Meter Kit-GP2410 24’ 10” Great Plains 2410 24’ 10” 28 2 1 $3,309.00BMK224152410 Belt Meter Kit-GP2410 24’ 15” Great Plains 2410 24’ 15” 19 2 1 $2,648.00BMK230753010 Belt Meter Kit-GP3010 30’ 7.5” Great Plains 3010 30’ 7.5” 48 2 1 $4,783.00BMK230803010 Belt Meter Kit-GP3010 30’ 8” Great Plains 3010 30’ 8” 44 2 1 $4,488.00BMK230103010 Belt Meter Kit-GP3010 30’ 10” Great Plains 3010 30’ 10” 36 2 1 $3,898.00BMK230153010 Belt Meter Kit-GP3010 30’ 15” Great Plains 3010 30’ 15” 24 2 1 $3,014.00BMK224752SF24 Belt Meter Kit-GP2SF24 24’ 7.5” Great Plains 2SF24 24’ 7.5” 38 2 0 $3,882.00BMK212603PD12 Belt Meter Kit-GP3PD12 12’ 6” Great Plains 3PD12 12’ 6” 24 1 0 $2,310.00BMK212703PD12 Belt Meter Kit-GP3PD12 12’ 7” Great Plains 3PD12 12’ 7” 20 1 0 $2,015.00BMK212753PD12 Belt Meter Kit-GP3PD12 12’ 7.5” Great Plains 3PD12 12’ 7.5” 19 1 0 $1,944.00BMK212803PD12 Belt Meter Kit-GP3PD12 12’ 8” Great Plains 3PD12 12’ 8” 18 1 0 $1,867.00BMK212103PD12 Belt Meter Kit-GP3PD12 12’ 10” Great Plains 3PD12 12’ 10” 14 1 0 $1,572.00BMK214083PD14 Belt Meter Kit-GP3PD14 14’ 8” Great Plains 3PD14 14’ 8” 20 1 0 $2,015.00BMK214083PD14-1 Belt Meter Kit-GP3PD14 14’ 8” W/MARKERS Great Plains 3PD14 14’ 8” 20 1 0 $2,015.00BMK215603PD15 Belt Meter Kit-GP3PD15 15’ 6” Great Plains 3PD15 15’ 6” 30 1 0 $2,752.00BMK215703PD15 Belt Meter Kit-GP3PD15 15’ 7” Great Plains 3PD15 15’ 7” 26 1 0 $2,457.00BMK215703PD15-1 Belt Meter Kit-GP3PD15 15’ 7” W/MARKERS Great Plains 3PD15 15’ 7” 26 1 0 $2,457.00BMK215753PD15 Belt Meter Kit-GP3PD15 15’ 7.5” Great Plains 3PD15 15’ 7.5” 24 1 0 $2,310.00BMK215753PD15-1 Belt Meter Kit-GP3PD15 15’ 7.5” W/MARKERS Great Plains 3PD15 15’ 7.5” 24 1 0 $2,310.00BMK215803PD15 Belt Meter Kit-GP3PD15 15’ 8” Great Plains 3PD15 15’ 8” 22 1 0 $2,162.00BMK215803PD15-1 Belt Meter Kit-GP3PD15 15’ 8” W/MARKERS Great Plains 3PD15 15’ 8” 22 1 0 $2,162.00BMK215103PD15 Belt Meter Kit-GP3PD15 15’ 10” Great Plains 3PD15 15’ 10” 18 1 0 $1,867.00BMK215153PD15 Belt Meter Kit-GP3PD15 15’ 15” Great Plains 3PD15 15’ 15” 12 1 0 $1,425.00BMK220753PD20 Belt Meter Kit-GP3PD20 20’ 7.5” Great Plains 3PD20 20’ 7.5” 32 2 0 $3,440.00BMK220803PD20 Belt Meter Kit-GP3PD20 20’ 8” Great Plains 3PD20 20’ 8” 30 2 0 $3,292.00BMK220803PD20-1 Belt Meter Kit-GP3PD20 20’ 8” W/MARKERS Great Plains 3PD20 20’ 8” 30 2 0 $3,292.00BMK220103PD20-1 Belt Meter Kit-GP3PD20 20’ 10” W/MARKERS Great Plains 3PD20 20’ 10” 24 2 0 $2,850.00BMK220153PD20 Belt Meter Kit-GP3PD20 20’ 15” Great Plains 3PD20 20’ 15” 16 2 0 $2,260.00BMK230702SF30 Belt Meter Kit-GP2SF30 30’ 7” Great Plains SF30 30’ 7” 52 2 0 $4,914.00BMK24580SS45 Belt Meter Kit-GPSS45 45’ 8” Great Plains SS45 45’ 8” 66 3 0 $6,044.00BMK23075SS87 Belt Meter Kit-GPSS’87 30’ 7.5” Great Plains SS87 30’ 7.5” 48 2 0 $4,619.00BMK23015SS87 Belt Meter Kit-GPSS’87 30’ 15” Great Plains SS87 30’ 15” 24 2 0 $2,850.00Case-IH Belt Meter KitsProduct ID Description Make Model Width Spacing Meters Drives Lift Kit PriceBMK415705400 Belt Meter Kit-CIH5400 15’ 7” Case IH 5400 15’ 7” 26 1 0 $2,457.00BMK415755400 Belt Meter Kit-CIH5400 15’ 7.5” Case IH 5400 15’ 7.5” 24 1 0 $2,310.00BMK415805400 Belt Meter Kit-CIH5400 15’ 8” Case IH 5400 15’ 8” 22 1 0 $2,162.00BMK415105400 Belt Meter Kit-CIH5400 15’ 10” Case IH 5400 15’ 10” 18 1 0 $1,867.00BMK415155400 Belt Meter Kit-CIH5400 15’ 15” Case IH 5400 15’ 15” 12 1 0 $1,425.00BMK420705400 Belt Meter Kit-CIH5400 20’ 7” Case IH 5400 20’ 7” 34 2 0 $3,587.00BMK420755400 Belt Meter Kit-CIH5400 20’ 7.5” Case IH 5400 20’ 7.5” 32 2 0 $3,440.00BMK420805400 Belt Meter Kit-CIH5400 20’ 8” Case IH 5400 20’ 8” 30 2 0 $3,292.00BMK420105400 Belt Meter Kit-CIH5400 20’ 10” Case IH 5400 20’ 10” 24 1 0 $2,310.00BMK420205400 Belt Meter Kit-CIH5400 20’ 20” Case IH 5400 20’ 20” 12 1 0 $1,425.00BMK430705500 Belt Meter Kit-CIH5500 30’ 7” Case IH 5500 30’ 7” 52 2 0 $4,914.00BMK430755500 Belt Meter Kit-CIH5500 30’ 7.5” Case IH 5500 30’ 7.5” 48 2 0 $4,619.00BMK430105500 Belt Meter Kit-CIH5500 30’ 10” Case IH 5500 30’ 10” 36 2 0 $3,735.00Continued on next pageVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 77Case-IH Belt Meter Kits - ContinuedProduct ID Description Make Model Width Spacing Meters Drives Lift Kit PriceBMK415155400-11 Belt Meter Kit-CIH5400 SS 15’ 15” Case IH 5400SS 15’ 15” 11 1 0 $1,354.00BMK415155400-12 Belt Meter Kit-CIH5400 SS 15’ 15” Case IH 5400SS 15’ 15” 12 1 0 $1,425.00BMK420155400-14 Belt Meter Kit-CIH5400 SS 20’ 15” Case IH 5400SS 20’ 15” 14 1 0 $1,572.00BMK420155400-15 Belt Meter Kit-CIH5400 SS 20’ 15” Case IH 5400SS 20’ 15” 15 1 0 $1,649.00BMK420155400-16 Belt Meter Kit-CIH5400 SS 20’ 15” Case IH 5400SS 20’ 15” 16 1 0 $1,720.00BMK430155500 Belt Meter Kit-CIH5500 SS 30’ 15” Case IH 5500SS 30’ 15” 24 2 0 $2,850.00s.i. belT MeTer KiTss.i. belT MeTer ParTsEach Kit Includes An Extra Belt Meter, Cutoff Brush & Cotter PinBMP008151S.I. Belt Meter PartsKey Product ID Description Qty/Meter Price/EachBMP001000 Belt Meter, John Deere, complete $79.00BMP001005 Retaining cap, John Deere (not shown; fits on top of meter 1 $7.20BMP001500 Belt Meter, clear, with handle, for display purposes only, complete $79.00BMP002000 Belt Meter, Great Plains, angled top, complete $79.00BMP002005 Retaining cap, Great Plains, angled top (not shown; fits on top of meter 1 $7.20BMP003000 Belt Meter, Great Plains, Case-IH, flat top, complete $79.00BMP003005 Retaining cap, Great Plains, Case-IH, flat top (not shown; fits on top of meter 1 $7.201 BMP005000 Meter housing, John Deere, right hand 1 $11.852 BMP005001 Meter housing, John Deere, left hand 1 $11.85BMP005002 Meter housing, Great Plains, Case-IH, flat top, left hand 1 $11.85BMP005003 Meter housing, Great Plains, Case-IH, flat top, right hand 1 $11.85BMP005004 Meter housing, Great Plains, angled top, left hand 1 $11.85BMP005005 Meter housing, Great Plains, angled top, right hand 1 $11.853 BMP005008 Seed belt 2 $5.957 BMP005009 Brush, cutoff 1 $6.958 BMP005011 Brush, drop 1 $9.956 BMP005012 Drive sprocket 1 $18.755 BMP005013 Spool 1 $3.254 BMP005014 Lower idler 1 $3.2510 BMP005015 Screw, Phillips head, #10-24 x 1/2 7 $0.1211 BMP005016 Flange nut, #10-24 7 $0.25BMP005018 Cap, plastic, for grass seed tube (not shown) 1 $0.609 BMP005022 Cotter pin, humped 1 $0.95BMP006169 Soybean Screen, to check seed size (not shown) $17.50S.I. Belt Meter Service PartsProduct ID Description Qty/Meter Price/EachBMP008100 Meter disassembly, inspection, repair & reassembly (plus parts) $8.00BMP008151 Meter fixture, makes disassembly & reassembly of your own meters easier $36.95BMP001775 Graphite, 1-lb. bottle $5.75800.368.7773CALL TOLL-FREE TO ORDER TODAY.8At 5 mph on 30-inch rows, your meter is turning at 65 rpm. At that speed, precision matters. Springs, fingers, cams, backing plates, belts, housings, covers, brushes, bearings – everything must work together to get seed to the ground every 6.8 inches.In the Precision Meter, everything does work together. Every part is precisely designed, engineered and manufactured to work with every other part. So every 6.8 inches, it plants one seed. Compared to ordinary, less precise meters, this instantly produces more ears, 6+ bushels more, from every acre.At $6.00 per bushel, that’s $36.00 per acre. No wonder many top producers are upgrading to Precision Meters or ordering new planters without meters and adding Precision Meters.The Precision Meter contains the following parts: Precision Finger Set – The shape and design of the finger determines how well it can singulate and hold a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt. PopMax Backing Plate – The special Kevlar® impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes. Adjustable Brush – For the first time, with just a set screw, you can change the aggressiveness of your meter. Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles. SkipStop – With its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube.SureFire Seed Belt – A seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/ double. The new SureFireTM cupped seed belt releases down the center every time for sure spacing and more ears.Please reference chart on pages 12-13 to identifycorrect seed tube applications.PreCision MeTerWhen everything works together, every seed ends up where it belongs, producing picket fence stands, maximum yields and an extra $36 per acre for you.Better Seed Spacing for More Harvestable EarsPrecision MetersProduct ID Description PricePPM343022 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, corn $180.00PPM343072 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 6-fingers, corn $184.00PPM343063 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, sweet corn $195.00PPM343116 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 6-fingers, pumpkin $195.00PPM343110 Precision Meter, John Deere 7000, 7100; Kinze 2000 series, 12-fingers, sunflower $240.00PPM343025 Precision Meter, John Deere 7200, 7300, 1700 series, 12-fingers, corn $180.00PPM343099 Precision Meter, John Deere 7200, 7300, 1700 series, 6-fingers, corn $184.00PPM343101 Precision Meter, John Deere 7200, 7300, 1700 series, 12-fingers, sweet corn $195.00PPM343030 Precision Meter, Kinze 3000 series, 12 fingers, corn $180.00PPM343071 Precision Meter, Kinze 3000 series, 6-fingers, corn $184.00PPM343105 Precision Meter, Kinze 3000 series, 12-fingers, sunflower $240.00PPM343050 Precision Meter, Great Plains planters, 12-fingers, corn $180.00PPM343051 Precision Meter, Great Plains planters, 6-fingers, corn $180.00PPM343055 Precision Meter, Great Plains planters, 12-fingers, sunflower $240.00Precision Meter & Universal Bullseye Seed Tube Kits Save $8.00 per rowProduct ID Description PricePPM345020 John Deere 7000, 7100; Kinze 2000 series (PPM343022 & PPM700150) $188.00PPM345021 John Deere 7200, 7300, 1700 series (PPM343025 & PPM700160) $188.00PPM345022 Kinze 3000 Series (PPM343030 & PPM700150) $188.00Precision Meter & Wave Vision Seed Tube Kits Save $13.00 per rowProduct ID Description PricePPM345026 John Deere 7000, 7100; Kinze 2000 series (PPM343022 & PPM700250) $307.00PPM345027 John Deere 7200, 7300, 1700 series (PPM343025 & PPM700200) $307.00PPM345028 Kinze 3000 Series (PPM343030 & PPM700250) $307.00Note: For planters with Keeton Seed Firmers the new WaveVision firmer tail is required. VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 9Precision Re-Power Kits Save $5.25 Per RowProduct ID Description PricePPM345024 Precision Re-Power Kit, John Deere 7000, 7100; Kinze with PPM700150 Bullseye $122.00PPM345025 Precision Re-Power Kit, John Deere 7200, 7300, 1700 series with PPM700160 Bullseye $122.00Miscellaneous Service PartsProduct ID Description PricePPM343062 Drive Wheel for seed belt $6.50PPM343098 Cover for Precision Meter, John Deere 7000, Kinze 2000 $8.90PPM343102 Ash Tray, finger holder $8.00BMP001775 Graphite, 1-lb. bottle $5.75PPM930004 Eflow, 80% graphite, 20% talc, 8-lb. container $24.95Precision Finger SetThe shape and design of the finger determines how well it can singulate and hold a single seed – round or flat. The Precision Finger Set’s unique finger shape locks both flat and round seeds under the flag for secure delivery to the seed belt.Precision PopMax Backing Plate The special Kevlar® impregnated poly backing plate presents a flatter more consistent platform for the Precision Finger Set. Its exclusive metal wear strip delivers far longer life than metal plates. Interchangeable inserts let you make adjustments for varying seed sizes and shapes. Includes adjustable brush.Precision BrushesFor the first time, with just a set screw, you can change the aggressiveness of the Precision meter. Set the brush toward the outside of the finger for large seeds so they don’t dislodge. Set the brush further inside the finger for small seeds so it can aggressively remove doubles.Precision SkipStop CoverWith its patented cushioning system, the SkipStop cover eliminates seed ricochets, which produce skips that you see in other finger pick-up meters. When seeds hit the cushion, they drop directly onto the seed belt for delivery to the seed tube. Includes cushion. Precision SureFire Seed BeltA seed released down the center of the tube can catch up with one bouncing around because it was released off to the side. That leaves two seeds in one spot and none in the next, a virtual skip/double. The new SureFire™ cupped seed belt releases seed down the center every time for sure spacing and more ears.PreCision MeTer ParTsPrecision Finger SetAdjustable BrushSkipStop CoverSureFire Seed BeltPopMaxBacking PlatePlease reference chart on pages 10-11 to identify correct seed tube applications.Meter Re-Power Plus KitIncludes: Precision Finger Set, Population Max Backing Plate with Adjustable Brush, Skipstop Cover, SureFire Seed Belt, Bullseye Seed Tube and T-Handle for Adjustable Brush.Product ID Description PricePPM343029 Precision Finger set, 12-finger, corn $35.00PPM343053 Precision Finger set, 6-finger, narrow row corn $37.00PPM343064 Precision Finger set, 12-finger, sweet corn $57.00PPM343065 Precision Finger set, 6-finger, pumpkin $57.00PPM343067 Precision Finger set, 12-finger, sunflower $135.00PPM343104 Precision Finger set, 12-finger, popcorn $57.00Product ID Description PricePPM342103 Precision PopMax Backing Plate with “A” insert & adjustable brush $38.00PPM342111 Precision PopMax Backing Plate with “C” insert & brushless blank $38.00PPM342110 Replacement “A” Insert, most field corn and larger popcorn $7.00PPM342107 Replacement “B” Insert, flat field corn with heavy seed treatment and small to medium popcorn $7.00PPM342108 Replacement “C” Insert, sunflower, sweet corn and edible beans $7.00Product ID Description PricePPM343052 Precision Adjustable Brush $8.00PPM343049 Pkg of 2, Precision Maroon Brush, Non-Adjustable, for Precision PopMax plate $5.50PPM343060 T-Handle for Adjustable Brush $3.25Product ID Description PricePPM343024 Precision SkipStop Cover, with cushion, all except Great Plains $23.00PPM343014 Replacement SkipStop Cushion $16.50PPM343073 Replacement SkipStop Cushion, Great Plains $17.00Product ID Description PricePPM343066 Precision SureFire Seed Belt $12.00800.368.7773CALL TOLL-FREE TO ORDER TODAY.10Seed Tube Bounce or Ricochet Can Ruin the Best Meter Singulation.Every time a seed hits the seed tube wall it slows down. Slow seeds lead to erratic spacing, causing the familiar skip/double pattern that leads to lost yields.It happens because ordinary seed tubes have catch points that interfere with the seed’s descent. So we eliminated them. In our new BullsEye seed tube, we moved the sensor out of the way - offset it just enough so that it won’t snag the seed. So there’s nothing in the way of a smooth, consistent ride down the tube. And we made that tube out of a special nylon that speeds the seed on its way.We also eliminated the biggest wear issue with seed tubes: the way openers wear away their tips. That not only shortens the tube’s life, it leads to spotty spacing because seeds scatter when they hit that worn spot. Tungsten carbide tips insure that the BullsEye will long outlast ordinary seed tubes. Your replacement costs will plummet.Redesigned Tip for Less Wear• Bullseye (left)• Conventional (right)Bullseye Advantages:• Reduces seed tube bounce• Reduces excessive wearbullseye seed TubeOffset Sensor to ReduceSeed CatchpointsBullseye Seed TubesProduct ID Description Make Model Seed Tube Opening Notes PriceNot Available Not Available Case-IH All PPM700150 Bullseye Seed Tube Great Plains Yield Pro Planters 2-1/4” x 1-3/4” $16.00PPM700150 Bullseye Seed TubeJohn Deere7000, 7100 series 2-1/4” x 1-3/4” $16.00PPM700150 Bullseye Seed Tube 7200, 7300 series 2-1/4” x 1-3/4” $16.00PPM700160 Bullseye Seed Tube 7200, 7300 series 3” x 2-1/4” Model year -2006 requires PPM700137 Model year 2007- requires PPM700167$16.00PPM700160 Bullseye Seed Tube 1700 series 3” x 2-1/4” $16.00PPM700150 Bullseye Seed TubeKinze2000 series 2-1/4” x 1-3/4” $16.00PPM700150 Bullseye Seed Tube 3000 series 2-1/4” x 1-3/4” $16.00PPM700160 Bullseye Seed Tube 3000 series 3” x 2-1/4” Except EdgeVac or KPM III sensors $16.00PPM700158 Bullseye Seed Tube Monosem All 2-1/4” x 1-3/4” $16.00PPM700155 Bullseye Seed TubeWhite5100 series Modification required $16.00PPM700155 Bullseye Seed Tube 6000 series $16.00PPM700155 Bullseye Seed Tube 8000 series $16.00PPM700155 Bullseye Seed Tube 9000 series $16.00Bullseye Seed Tubes accept 1/2” and 3/4” diameter sensorsSeed Tube Mounting AccessoriesProduct ID Description PricePPM700137Pkg of 4, pin & clip for John Deere 7200, 1700 series model year -2006 For Bullseye seed tubes on planters with mounting holes in shank. Pin is 1/4” x 2-5/8” long.$5.00PPM700167 Pkg of 4, spring pin for John Deere 7200, 1700 series model year 2007- For Bullseye seed tubes on planters without mounting holes in shank $10.00VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 11WaVeVision seed TubeNot compatible with these monitors: AGCO GTA, KPM I, II or III, Kinze Vision, Monosem MPM, SM400SE and GTA.Better information in. Better information out.For measuring population, seed spacing, skips and doubles, you depend on the accuracy of your seed sensors. But optical sensors have four big problems:• Dust looks just like seeds• Doubles look like singles• Dust coats the eyes• They mount at the middle of the seed tubeBecause optical sensors use light beams, they are susceptible to all the things that can falsely break that beam. That’s why dust is such a prob-lem. Dust that blows up the seed tube looks like seed. So the optical sensor routinely over counts seeds, which undercuts your population. Of course there are times when you can tell dust is the issue – when you’re planting with the wind and your population spikes ten or twenty thou-sand seeds. But more harmful impact is the day-in day-out over reporting of seeds because of dust.And then there is the problem of dust coating the sensor eyes and failing all together. Optical sensors must be mounted at the middle of the seed tube in order to keep them out of the dust. But most of the seed-delaying seed tube bounce happens in the lower part of the tube. So you really don’t have a good idea of seed spacing with an optical sensor.And finally, optical sensors look at the surface of the seed – just the plane that breaks the beam. So, two seeds (a double) that move along the seed tube together will be reported as a single seed, again under reporting the actual population and accurate numbers.WaveVision eliminates these problems and provides good clean information to your monitor. High frequency radio waves, rather than light, engulf seeds so that you get a “three-dimensional” look at seeds. It sees mass, not shape. So doubles look like doubles. The radio waves also see through dust. And that means we can mount the seed sensor where it belongs, at the bottom of the seed tube.Optical sensors can’t distinguish dust and debris from seeds. WaveVision can, and gives you an accurate count.WaveVision Seed TubesProduct ID Description PricePPM700200 WaveVision Seed Tube, John Deere 7200, 7300, 1700 series $140.00PPM700250 WaveVision Seed Tube, John Deere 7000, 7100; Kinze; Great Plains Yield Pro $140.00PPM700255 WaveVision Seed Tube, White 5000, 6000, 8000, 9000 series $140.00PPM700260 WaveVision Seed Tube, Monosem $140.00PPM700266 WaveVision Power Module, for planters without 2020 SeedSense $125.00Note: For planters without Precision Planting’s 2020 SeedSense a power module is required. see page 11 for seed Tube Mounting accessoriesKeeton Seed Firmer Tails Only for WaveVisionProduct ID Description PriceKTN125011 WaveVision Firmer Tail, dry tail only, fits in Universal or Kinze bracket $34.50KTN115013 WaveVision Firmer Tail, dual tube tail only, fits in Universal or Kinze bracket $34.50KTN126010 WaveVision Firmer Tail, short low profile tail only, fits in Universal or Kinze bracket $34.50KTN121006 WaveVision Firmer Tail, long low profile tail only, fits in Universal or Kinze bracket $34.50Note: For planters with Keeton Seed Firmers a new WaveVision firmer tail is required. Keeton Seed Firmer Kits for WaveVisionProduct ID Description PriceKTN125012 WaveVision Firmer, Universal bracket & dry tail $37.00KTN115011 WaveVision Firmer, Universal bracket & dual tube tail $37.00KTN126008 WaveVision Firmer, Universal bracket & short low profile tail $37.00KTN121004 WaveVision Firmer, Universal bracket & long low profile tail $37.00KTN125013 WaveVision Firmer, Kinze bracket & dry tail $37.00KTN115012 WaveVision Firmer, Kinze bracket & dual tube tail $37.00KTN126009 WaveVision Firmer, Kinze bracket & short low profile tail $37.00KTN121005 WaveVision Firmer, Kinze bracket & long low profile tail $37.00Note: For planters with Keeton Seed Firmers the new WaveVision firmer tail is required. 800.368.7773CALL TOLL-FREE TO ORDER TODAY.12PlanTer rePlaCeMenT ParTsPlanter Replacement PartsProduct ID Description Photo Application OEM# PricePLT037474Double Disc Opener Assembly 15” diameter x 3.5mm thick Includes blade, bearing, hub, dust capJohn Deere MaxEmerge series row units Kinze, all White 6000 seriesAA20242, AA37474, AA55927 GA8324 852063$29.95PLT065248Double Disc Opener Assembly 15” diameter x 3.5mm thick Includes blade, bearing, hub, dust capJohn Deere XP series row units AA65248 $31.95PLT061577 Seed Tube Guard Seed tube guide welded to guardAll John Deere planters with curved seed tubes except XP series All Kinze planters with curved seed tube except 3000 seriesA61577, AA54755 $8.95PLT080203 Seed Tube Guard Seed tube guide welded to guard John Deere XP series with curved seed tubes A80203 $8.95PLT054179 Pivot Arm Two required per rowJohn Deere 1700 series; MaxEmerge Plus and Pro units Gauge wheel arm mounts to planter with 16mm x 100mm bolt Gauge wheel mounts to arm with set screwA54179, A79647 $23.25PLT079648 Pivot Arm Two required per rowJohn Deere 1700 series; MaxEmerge XP and XP Pro units Gauge wheel arm mounts to planter with 16mm x 100mm bolt Gauge wheel mounts to arm with boltA79648 $23.25PLT154179 Self Aligning Bushing 16mm (5/8”) inside diameterJohn Deere late MaxEmerge 2; all MaxEmerge Plus, Pro, XP, XP Pro Used in PLT054179 and PLT079648 kitsA57058 $9.95PLT041968 Pivot Arm Two required per rowJohn Deere 7200, 7300 and early 1760, 1780 MaxEmerge 2 units Gauge wheel arm mounts to planter on 1” diameter pin Gauge wheel mounts to arm with set screwAA41968 $23.25PLT006614 Pivot Arm Two required per rowKinze 2000 series, 1993-1999 Gauge wheel arm mounts to planter on 1” diameter pin Gauge wheel mounts to arm with boltGA6614 $21.95PLT141968 Self Aligning Bushing 1” inside diameterJohn Deere 7200, 7300 and early 1760, 1780 MaxEmerge 2 units Kinze 2000 series, 1993-1999 Used in PLT006614 and PLT041968 kitsA57057 $9.95PLT035951 Bearing, Gauge Wheel For roll pin style gauge wheelsJohn Deere MaxEmerge, MaxEmerge 2 prior to 1992 Kinze prior to 1993 Case 800, 900, 1200 series (to S/N CBJ0001610) White 5100, 5700AA35951 128558C91 $8.95VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 13The features are:• VenHuizen AccuVac 40-hole seed corn plate replaces the 30-cell seed corn disk• The vacuum meter turns slower since the AccuVac 40-hole seed plate makes fewer revolutions to plant the same number of seeds as the original 30-cell disk• Since the vacuum meter is turning slower, the planter can travel at a faster ground speed without increasing meter RPM’s when compared to the original meter• The VenHuizen AccuVac plate allows for better seed pickup on hillsides and in high humidity conditions• The modified adjustable “Seed Singulator Kit” virtually eliminates doubles, which significantly improves the desired planting population. The design of the seed singulator allows for one setting regardless of the seed size• Seed Guide funnels seed to center of seed tube to eliminate seed bounce which causes erratic seed spacing in the rowVenHuizen aCCuVaC KiTThe VenHuizen AccuVac kit is available for all John Deere vacuum meters including the dual seed inlet meter and Pro-Series meter.Kit includes:• A VenHuizen AccuVac 40-hole seed corn plate• The modified adjustable “Seed Singulator Kit”• Adjustment tool to properly set the singulator kit• New seed guide• Installation hardware and detailed instructionsThe VenHuizen AccuVac Kit for John Deere ImprovesThe Desired Planting Population For CornThe VenHuizen AccuVac kit for John Deere can also plant most sizes of seed corn, even mixed sizes, without changing the plate and with minimal vacuum level changes on the planter.VenHuizen AccuVac KitsProduct ID Description PriceAVC020000 AccuVac Kit, all John Deere except Pro-Series $65.00AVC020560 AccuVac Kit, John Deere Pro-Series $75.00VenHuizen AccuVac Service PartsProduct ID Description PriceAVC020100 Singulator Kit, all John Deere except Pro-Series $35.00AVC020660 Singulator Kit, Pro-Series $45.00AVC021100 Package of 4, Seed Guide Kit $20.00AVC021200 Package of 6, Seed Guide Kit $30.00AVC030001 Replacement AccuVac Seed Plate $29.95BMP001775 Graphite, 1-lb. bottle $5.75PPM930004 Eflow, 80% graphite, 20% talc, 8-lb. container $24.95800.368.7773CALL TOLL-FREE TO ORDER TODAY.14CleansWeePNOW, with CleanSweep™, you no longer have to hope, but you can manage your row cleaner performance, from the cab, on the go.Row Cleaners are a great planter attachment for handling excessive residue during planting. They remove the plant debris and cre-ate a uniform seedbed; However, too light of setting leaves residue in the row competing for moisture and nutrients. Too heavy of setting tills and moves soil creating trenches and potentially alter planting depth.Properly set row cleaners and floating row cleaners are ways growers could look to reduce these negative impacts, but conditions can vary greatly from field to field, day to day, even row to row. And, making these adjustments are time consuming. Thus, most growers set for the average and hope for good performance.CleanSweep is a dual air cylinder that lets you set and adjust your row cleaners’ down pressure from the cab.1. Have heavy residue? Add more pressure to sweep away the debris.2. Have light residue or soft ground? Lighten the pressure and keep the row cleaner floating across the top.The cylinders have a control box mounted in the cab. You set the pounds of pressure from your cab based on the condition you are in. Plus, the pressurized cylinder gives the row cleaner the ability to adjust or “float” across the small changes you encounter such as terrain or varying amounts of debrisThe CleanSweep system includes air cylinders, lines, air tank, compressor and controller. Available for these row cleaner models:• Martin C125 MTS, MTS-XP, MTS-81, MTS-IH; with or without Martin UMO• Martin C125 MTR, MTR-XP, MTR-81, MTR-IH; with or without Martin UMO• Martin WA1360 BD, BK, BW, BCIH, BDC; with or without Martin UMO• Yetter 2967-007, 2967-029, 2967-035 (short bracket), 2967-035, 2967-042, 2967-043, 2967-115Air Compressor & TankCab ControllerCleanSweep SystemPlanter Rows With Air Compressor Without Air Compressor8 $2,480.00 $1,930.0012 $3,120.00 $2,570.0016 $3,760.00 $3,210.0024 $5,040.00 $4,490.0036 $6,960.00 $6,410.0048 $8,880.00 $8,330.0054 $9,840.00 $9,290.00Basic system includes cab controller, air line kit, cylinders & mounting brackets.VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 151. Row cleaners move residue and lightly till the row2. Fertilizer opener places liquid fertilizer beside the row3. Keetons firm the seed in the bottom of the seed trench4. Spading closing wheels lift and fracture the sidewall5. Drag chains level and lightly firm the row topMarTin PlanTingaTTaCHMenTsMartin Row CleanersThe Martin-Till Planting SystemWA1360 Floating Row Cleaner• Most compact floating row cleaner available. Only requires 19” of clearance from planter face plate, 22” when using with no-till coulter and 25” when using with Martin UMO-100 fertilizer opener• Optional rear lever adjustment available (no tools needed, no under planter work)• Optional dial depth adjustment• Wheels can be installed in the intersected, offset, or retracted operating positionsProperly designed row cleaners provide a very desirable type of tillage. The row cleaner teeth continuously engage the soil to the shallow depth of 1” to 1-1/2”. This scarifying of the soil’s surface layer makes it easier for the seed openers to open a well-defined “V” but without furrowing out or causing slabbing or flaking. Eliminating furrows is the key to preventing erosion in the row on slopes and the ponding of water over the row in level areas.Martin Row Cleaners come in two basic types: Pin Adjust: Our pin adjust models are more aggressive row cleaners and are particularly useful when a furrow is needed to reach moisture. Pin Adjust models are available for all popular planters.Floating: The WA1360 floating row cleaners are designed to follow the contours of the soil surface, consistently moving residue away from the path of the gauge wheels. This allows the gauge wheels to run in the cleared zone to promote uniform depth control and facilitate quicker soil warning and rapid emergence. Floating models fit most planters and may be used ahead of most no-till coulters and certain fertilizer openers including the Martin UMO-100.All Martin Row Cleaners Feature the Following:• Heavy duty frame• 3/8” thick, heat treated, T-1 wheels• Stationary triple-lip seals• Heavy gauge dust caps• Double tapered bearings• Greaseable hubsA. IntersectedGood for no-till conditionsB. OffsetUse in freshly worked soil or loose sandy conditions. Suitable for no-till. May be used behind certain forward mounted fertilizer openersC. RetractedUse this position if the overall length is too long.WA1360Operating PositionsOptionalcam dial depth adjustmentMartin WA1360 Floating Row CleanersProduct ID Vendor ID Description PriceMRT001360 WA1360 Wrap around floating row cleaner, 13” wheels (mounting bracket not included) $360.50Martin WA1360 Mounting BracketsProduct ID Vendor ID Description PriceMRT001361 MT1360KS John Deere 7000, 7100, Kinze, White 6000, 8000 series w/o no-till coulters $65.50MRT001363* MT1360KU John Deere 7000, 7100, Kinze, White 6000, 8000 series with Martin UMO $75.50MRT001362 MT1360DS John Deere 7200, 7300, 1700 without no-till coulters $65.50MRT001368 MT1360DC John Deere 7200, 7300, 1700 with OEM unit mount, no-till coulter $65.50MRT001365* MT1360DU John Deere 7200, 7300, 1700 with Martin UMO $73.50MRT001376 MT1360DD John Deere 7200, 7300, 1700 with OEM double disc fertilizer openers $70.00MRT001367 MT1360KC Kinze with OEM double arm, unit mount, no-till coulter $65.50MRT001369 MT1360CIH Case-IH 800-1200 series without no-till coulters $88.50MRT001371* MT1360CU Case-IH 1200, 1300 series with Martin UMO (requires MRT007106 listed below) $85.50*Only one bracket is required to mount both Martin WA1360 row cleaner and Martin UMO-100 fertilizer opener.Martin WA1360 AccessoriesProduct ID Vendor ID Description PriceMRT003002 STW-04 Aluminum side treader wheel (2 required per row) 4-bolt $30.50MRT003146 WW-04 Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each $21.00MRT003154 CA-03D Cam adjustment kit, all JD; Kinze w/o no-till coulters; White 6000, 8000 series with UMO; Case-IH 1200 series with UMO, WA1360 row cleaners $61.00MRT003155 CA-03K Cam adjustment kit, Kinze with OEM no-till coulters, WA1360 row cleaners $64.00MRT003500 USB-70 Unit set back bracket, John Deere 7000, 7100, Kinze $78.50MRT003510 USB-72 Unit set back bracket, John Deere 7200, 7300, 1700 Series $112.00MRT007106 HDP-CIH01 Heavy duty lower parallel linkage set, Case-IH 1200, 1300 series $111.00800.368.7773CALL TOLL-FREE TO ORDER TODAY.16C125Shown with optional side treader wheels (STW-04)MarTin PlanTingaTTaCHMenTsMartin Row CleanersSTW-04Side treader wheels increase traction and flotation. Useful in loose soil or extremely heavy residue. Two required per row.DP-01Adds up to 20 lbs of down pressure to row cleaner. For use when planting in severe soil conditions.CA-02Allows adjustmentin 1/4” increments.USB70Unit set back kit.Moves planter unit back 6”.WW-04Wheel weights add weight to row cleaner. Helpful when planting in heavy residuesituations.CDP-01Allows adjustment in 1/4” increments and adds up to 20 lbs of down pressure.C125MTR C125MTR-IHC125MTR-81 C125MTR-XPC125 Floating Row Cleaner• The C-125 was replaced by the WA1360; however it is still available for certain planter configurations such as with aftermarket no-till coulters.• Floats to follow ground contour• Threaded depth adjustment limits down travel while allowing the semi-mounted frame to follow the contour of the land• Moveable axles with the Martin Exclusive D-lock System allow several mounting positions (intersect, offset, retracted)• 13” diameter left- and right-toothed steel wheels with diamond shaped points (15” wheels may be used on certain planters)• Includes internal deflectors protected under U.S. Patent #5,507,351Side Treader WheelsOur side treader wheels are a very good option, one most customers order, for the floating row cleaners because they help prevent unwanted trenching in softer parts of the field. Recent Farm Journal tests show a large yield increase when using this option.USB72Unit set back kit.Moves planter unit back 6”.Martin C125 Floating Row CleanersProduct ID Vendor ID Description PriceMRT012504 C125 Wrap around floating row cleaner, 13” wheels (mounting bracket not included) $360.50MRT112504 C125-GPTL Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, LH Includes single wheel row cleaner, mounting bracket & side treader wheel $309.00MRT212504 C125-GPTR Wrap around floating row cleaner, 13” single wheel, Great Plains Twin Row, RH Includes single wheel row cleaner, mounting bracket & side treader wheel $309.00Martin C125 Mounting BracketsProduct ID Vendor ID Description PriceMRT001400 C125MTR John Deere 7000, 7100, Kinze, White 6000 series, with no-till coulters, 24-3/4” long $65.50MRT001401 C125MTS-XP John Deere 7200-1700, White 9000, without no-till coulters, 19-5/16” long $65.50MRT001402 C125MTR-IH Case-IH 800, 900, 1200 series with no-till coulters, 28” long $70.00MRT001409 C125MTR-81 White 8000 series with no-till coulters, 24-3/4” long $65.50MRT001404 C125MTR-XP John Deere 7200-1700, White 9000 with no-till coulters; Great Plains 6030; 24-3/4” long $65.50MRT001412 C125MTR-G1 Great Plains Yield-Pro Planter, 30” rows, use standard C125 row cleaner $65.50Martin C125 AccessoriesProduct ID Vendor ID Description PriceMRT003000 STW-01 Aluminum side treader wheel (2 required per row) 3-bolt $30.50MRT003001 STW-01K Aluminum side treader wheel (2 required per row) 6-bolt, for Kinze $35.00MRT003002 STW-04 Aluminum side treader wheel (2 required per row) 4-bolt $30.50MRT003143 CA-02 Cam adjustment kit, C125 floating row cleaners $42.25MRT003145 DP-01 Down pressure kit, C125 floating row cleaners $42.25MRT003146 WW-04 Wheel weight, for row cleaner wheel, 4-bolt, 4 lbs. each $21.00MRT003147 CDP-01 Cam adjustment & down pressure kit, C125 floating row cleaners $62.50MRT003500 USB-70 Unit set back bracket, John Deere 7000, 7100, Kinze $78.50MRT003510 USB-72 Unit set back bracket, John Deere 7200, 7300, 1700 Series $112.00Martin Row Cleaner & Spader Wheel Replacement PartsProduct ID Vendor ID Description PriceMRT003900 TW3813-L3 Wheel, 13” 3-bolt, LH on row cleaner, RH on closing wheels $54.00MRT003901 TW3813-R3 Wheel, 13” 3-bolt, RH on row cleaner, LH on closing wheels $54.00MRT003905 TW3813-L4 Wheel, 13” 4-bolt, LH on row cleaner, RH on closing wheels $54.00MRT003906 TW3813-R4 Wheel, 13” 4-bolt, RH on row cleaner, LH on closing wheels $54.00MRT003909 TW3813-LK Wheel, 13” 6-bolt, LH on row cleaner, RH on closing wheels $59.00MRT003910 TW3813-RK Wheel, 13” 6-bolt, RH on row cleaner, LH on closing wheels $59.00MRT004158 TW3815-L3 Wheel, 15” 3-bolt, LH on row cleaner, RH on closing wheels $63.00MRT004159 TW3815-R3 Wheel, 15” 3-bolt, RH on row cleaner, LH on closing wheels $63.00MRT004177 TW3815-L4 Wheel, 15” 4-bolt, LH on row cleaner, RH on closing wheels $63.00MRT004178 TW3815-R4 Wheel, 15” 4-bolt, RH on row cleaner, LH on closing wheels $63.00MRT003908 HA13305-D Hub & Axle, 3-bolt, for Martin pin adjust row cleaners, WA1317, WA1330 $78.50MRT003902 HA13270-D Hub & Axle, 3-bolt, for Martin floating row cleaners, C125 $78.50MRT003907 HA44270-D Hub & Axle, 4-bolt, for Martin row cleaners, C125, WA1360, WA1332, WA1334, WA1532 $78.50MRT003903 CHU024 Hub, 3-bolt, for Martin closing wheels with single bearing, 5/8” I.D. $42.25MRT004167 CHU022 Hub, 3-bolt, for Martin closing wheels with two bearings, 17mm I.D. $42.25MRT004190 CHU044-B2 Hub, 4-bolt, for Martin closing wheels with single bearing, 5/8” I.D. $61.00MRT004175 CHU44-A Hub, 4-bolt, for Martin closing wheels with two bearings, 17mm I.D. $61.00Note: 13” wheels should be replaced when 12” or less and 15” wheels when 13-3/4” or lessVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 17The Martin original style row cleaner clears the widest path of any tooth wheel row cleaner on the market. The 15” diameter, 3/8” thick, T-1 heat-treated wheels are made left and right in order to shed the residue better. The axles are located to the rear of the adjustable stem in order to insure a simultaneous stretching and cutting of the residue. The teeth on the cleaning wheels actually reach past the edge of the planter gauge wheel rubber. Martin Pin Adjust Row CleanersWA1532 Martin Original Style Row Cleaner• Rigidly mounted directly to planter unit face plate• Easily adjustable in 1/4” increments with lift assist handle and spring• 3/8” thick, 15” diameter, toothed steel wheels with diamond shaped points - largest on the market• Includes internal deflectors protected under U.S. Patent #5,507,351• Cast 4-bolt hub• Double tapered bearings• Triple lip sealsWA1332 and WA1334 Row Cleaners• Rigidly mounted directly to planter unit face plate• Easily adjustable in 1/4” increments with lift assist handle and spring• Movable axles with the Martin Exclusive D-Lock System allow for several mounting positions (intersect, offset, retracted)• 13” diameter toothed steel wheels with diamond shaped points allow plenty of upward adjustment in loosely worked soils• Includes internal deflectors protected under U.S. Patent #5,507,351WA1332 and WA1334 Operating PositionsWA1532WA1532 DimensionsA. IntersectedFor use in firm soil conditions and severe residue.B. Left or Right OffsetFor moderate residue and freshly tilled soil.C. RetractedCan be used behind certain frame mounted coulters.WA1332WA1334WA1332 Row Cleaner1-1/2” stem wheel as-sembly. For use with all pin adjust brackets that accept 1-1/2” stem.WA1334 Row Cleaner2” stem wheel assem-bly. For use with MT892 bracket.A. B. C.MT772 MT892 MT512 MT610 MT810 MT385MarTin PlanTingaTTaCHMenTsMartin Pin-Adjust Row CleanersProduct ID Vendor ID Description PriceMRT001320 WA1320N Pin-adjust row cleaner, narrow row, 1-½” stem, 13” wheels $331.00MRT001332 WA1332 Pin-adjust row cleaner, 1-½” stem, 13” wheels $333.00MRT001334 WA1334 Pin-adjust row cleaner, 2” stem for Case-IH planters, 13” wheels $333.00MRT001532 WA1532 Pin-adjust row cleaner, 1-½” stem, 15” wheels $351.00Martin Pin-Adjust Mounting BracketsProduct ID Vendor ID Description PriceMRT002000 MT772 John Deere, Kinze, White EARLY 6000 series with REGULAR down pressure springs and White 9000, accepts 1-½” stem wheel assemblies $74.00MRT000892 MT892 Case-IH 800, 900 series without heavy duty down pressure springs, accepts 2” stem wheel assemblies $60.00MRT001250 MT1250 Case-IH 1200, 1300 series, accepts 2” stem wheel assemblies $60.00MRT002200 MT512 White 5100 series, accepts 1-½” stem wheel assemblies $61.00MRT000610 MT610 White EARLY 6000 series with HEAVY duty down pressure springs, accepts 1-½” stem wheel assemblies $75.00MRT002100 MT810 White LATE 6000 series and all 8000 series, accepts 1-½” stem wheel assemblies $79.00MRT002400 MT385 Deutz-Allis Quadra Disk, Landoll, accepts 1-½” stem wheel assemblies $61.00MT1250800.368.7773CALL TOLL-FREE TO ORDER TODAY.18Reduced Inner Diameter Gauge TiresFEATURES OF UMO-100:• Sturdy compact design• Double tapered bearing hub• 5mm thick (0.197”) blade• Adjustable furrow control device• Can be set to place liquids 1”, 2”, or 3” from seed row• Can also be set to place liquids 3/4” above, even with or 3/4” below seed depth• Fit John Deere 7000-1700 series, all Kinze, White 6000 & 8000 series and Case-IH 1200 & 1300 series.• Patent #7,481,171UMO-100 Fertilizer OpenerThe fertilizer opener mounts directly to the planting unit and is compact enough to be mounted within the WA1360 and C125 floating row cleaners. Because the opener mounts directly to the planter unit, the fertilizer is always precisely the same distance from the seed even when planting on the contour. The lateral spacing from the seed can be 1”, 2”, or 3”, and there are three vertical settings that allow fertilizer to be placed 3/4” above, even with, or 3/4” below seed depth. We like the way it consistently places the fertilizer in the ground without splattering on the planter.RID-01 Tire• Reduced inner diameter gauge tires• Allows seed trench to lift and fracture• Softer, more flexible compound better sheds wet soil• Fits existing John Deere, Kinze, and White rims• Two required per rowNote: Reduced inner diameter gauge tires are NOT recommended for use in tilled soil conditions.Requires 13-1/2” of clearance from face plate of row unit.Apply nitrogen to side of seed furrow in a single pass.MarTin PlanTingaTTaCHMenTsTwisted Drag ChainDCK-01 drag chain kit• Crumbles, fills unclosed areas and levels soil above the seed slot• Heavy-duty, square-edged cross chain and brackets• Attaches to closing wheel brackets • Bolts to all John Deere Max-Emerge units• Fits Kinze and White units with bolt-on wheels• Kinze units with roll pin attached closing wheels will need holes drilled for mountingProduct ID Vendor ID Description PriceMRT003600 DCK-01 Drag chain kit $38.00UMO-100 Martin Unit Mounted Fertilizer OpenerProduct ID Vendor ID Description PriceMRT100100 UMO-100L Single disk unit mounted fertilizer opener, left $369.00MRT200100 UMO-100R Single disk unit mounted fertilizer opener, right $369.00Martin Unit Mounted Fertilizer Opener BracketsProduct ID Vendor ID Description PriceMRT000300 UMO-MTJ Bracket, John Deere 7200-1700, White 9000 series planters $34.00MRT000301 UMO-MTA Bracket, John Deere 7000, 7100 and Kinze planters $34.00MRT000302 UMO-MTW Bracket, White 8000 series planters $34.00MRT000303 UMO-MTG Bracket, Great Plains Yield-Pro Planter, mounts on top of standard C125 bracket $34.00Product ID Vendor ID Description PriceMRT003730 RID-01 RID tire, John Deere except XP, Kinze, White planters; JD 50, 60 & 90 series drills (2 required per row) $24.95MRT003731 N/A RID tire, John Deere XP row units (2 required per row) $34.95VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 19Spading Closing WheelsMartin spading closing wheels move soil toward the seed at planting depth, while lifting and fracturing the surface layer to achieve compaction-free closing of the seed trench in wet, hard or sod conditions. With soil firmed around the seed from each side and the surface layer loosened, crops emerge sooner and planting can be done at the proper depth, even in wetter conditions, without fear of crushed soil above the seed preventing emergence.Pictures above illustrate the difference between the seed trench after the Martin Spading-Closing wheel set passes on the left, compared to the seed trench after the regular closing wheel set passes on the right.SPECIFIC ADVANTAGES• Speeds up warming of the row area• Closing wheel arm pressure can be greatly reduced• Seed trench is closed in the most severe conditions• Seed depth does not have to be raised to insure emergence• Soil above the seed is loose and slightly mounded allowing quicker emergence in a compaction-free environment• Sidewall compaction is greatly reducedMarTin PlanTingaTTaCHMenTsAvailable for John Deere, Kinze, White, Case-IH & Great PlainsSCW1341 Closing Wheels• 3/8” thick, 13” diameter right and left toothed steel wheels with diamond shaped points• Cast hubs• Adaptor axles• For planters with roll-pin at-tached hubs: Deere 7000 & 7100 series, early Kinze series planters• Two 17mm I.D. bearingsSCW1343 Closing Wheels• 3/8” thick, 13” diameter right and left toothed steel wheels with diamond shaped points• Cast hubs• For Deere 7200-7300 series planters• Two 17mm I.D. bearingsSCW1344 Closing Wheels• 3/8” thick, 13” diameter right and left toothed steel wheels with diamond shaped points• Cast hubs• For planters with bolt-on hubs: Deere 1700 series, Kinze & White 6000 & 8000 series planters• Single 2-row 5/8” I.D. ball bearingPlanter Spading Closing WheelsSCW1541 Closing Wheels• 3/8” thick, 15” diameter right or left toothed steel wheel with diamond shaped points• Cast hub• Adaptor axle• For planters with roll-pin at-tached hubs: Deere 7000 & 7100 series and early Kinze planters• Two 17mm I.D. bearingsSCW1543 Closing Wheels• 3/8” thick, 15” diameter right or left toothed steel wheel with diamond shaped points• Cast hub• For Deere 7200 & 7300 series planters• Two 17mm I.D. bearingsSCW1544 Closing Wheels• 3/8” thick, 15” diameter right or left toothed steel wheel with diamond shaped points• Cast hub• For planters with bolt-on hubs: Deere1700 series, Kinze and White 6000 & 8000 series planters• Single 2-row 5/8” I.D. ball bearing• Bolts to John Deere or Kinze closing wheel frame with bolt-on closing wheels. • Lowers the closing wheels so the frame runs level.• Designed for paired 13” spading closing wheels when used in loose soilsDK-01ITDSCWMartin Planter Spading Closing WheelsProduct ID Vendor ID Description PriceMRT001341 BSCW1341 13” double closing wheel set, John Deere and Kinze planters with roll pin attached closing wheels, water pump bearing $243.00MRT001343 BSCW1343 13” double closing wheel set, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) and Great Plains 6030, 17mm bearing $230.00MRT001344 BSCW1344 13” double closing wheel set, John Deere, Kinze, White, Great Plains planters with bolt-on closing wheels, 5/8” bearing $230.00MRT101541 BSCW1541SL 15” single closing wheel, John Deere and Kinze planters with roll pin attached closing wheels, LH, water pump bearing $130.50MRT201541 BSCW1541SR 15” single closing wheel, John Deere and Kinze planters with roll pin attached closing wheels, RH, water pump bearing $130.50MRT101543 BSCW1543SL 15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) GP 6030, LH, 17mm bearing $124.00MRT201543 BSCW1543SR 15” single closing wheel, John Deere 7200, 7300, 1700 MaxEmerge 2 (threaded spindle on closing wheel bracket) GP 6030, RH, 17mm bearing $124.00MRT101544 BSCW1544SL 15” single closing wheel, John Deere, Kinze, White, Great Plains planters with bolt-on closing wheels, LH, 5/8” bearing $124.00MRT201544 BSCW1544SR 15” single closing wheel, John Deere, Kinze, White, Great Plains planters with bolt-on closing wheels, RH, 5/8” bearing $124.00Martin Planter Spading Closing Wheels OptionsProduct ID Vendor ID Description PriceMRT004191 DK-01 Drop down kit. Bolts to John Deere or Kinze closing wheel frame with bolt-on 13” spading closing wheels. Lowers the closing wheels so the frame runs level. $21.00MRT003149 ITDSCWSET Internal deflectors (scrapers) for spading closing wheels. Reduces buildup of mud and residue to insure fractured soil is placed evenly over seed trench. $27.00800.368.7773CALL TOLL-FREE TO ORDER TODAY.20Case-IH PlanterWhite PlanterAdvantages:• Double 3/8” thick, 13” diameter, left & right toothed steel wheels with diamond shaped points• Cast hubs with single 2-row ball bearing• Left & right angled brackets• Does not change planter’s overall length• 9” diameter toothed steel wheels & ball bearing hubs• Replaces offset closing disk on Case IH planters• Also fit JD & Kinze shallow closing systemsMarTin PlanTingaTTaCHMenTsPlanter Spading Closing WheelsSCW514 & SCW614 Double Closing Wheel Sets. These closing wheels can be added to the White 5000 or 6000 series planters that have single closing tires. The Martin Spading-Closing Wheels enhance closing of the seed trench while the smooth wheel gently firms the surface.Moist soil is moved toward the seed at seeding depth even in wet, hard or sod conditions. In wet condi-tions, the soil is prevented from forming a continuous ribbon by the lifting action of the teeth as they rotate up out of the soil.Other benefits include:• Closing wheel arm pressure can be greatly reduced• Seed trench is closed in the most severe conditions• Seeding depth does not have to be raised to insure emergence• Soil above the seed is loose allowing quicker emergence in a compaction free environment• Sidewall compaction is eliminatedSCW899BSCW51 BSCW61Martin Drill Spading Closing WheelsProduct ID Vendor ID Description PriceMRT175404 BSCW75B4L 13” single spiked closing wheel, John Deere 750, 1850 drill, LH $125.00MRT275404 BSCW75B4R 13” single spiked closing wheel, John Deere 750, 1850 drill, RH $125.00MRT075104 BSCW75B4D-20R 13” single 20 pt. dimple closing wheel, John Deere 750, 1850, RH $122.00MRT075204 BSCW75B4D-20L 13” single 20 pt. dimple closing wheel, John Deere 750, 1850, LH $122.00MRT115604 BSCW1564L 13” single spiked closing wheel, John Deere 1560-1890 drills, LH $86.00MRT215604 BSCW1564R 13” single spiked closing wheel, John Deere 1560-1890 drills, RH $86.00MRT315604 BSCW1564D-20 13” single 20 pt. dimple closing wheel, John Deere 1560-1890 drills $83.00Martin Planter Spading Closing WheelsProduct ID Vendor ID Description PriceMRT005104 BSCW514 13” double closing wheel set, White 5100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame $268.00MRT006104 BSCW614 13” double closing wheel set, White 6100 planters with single 4” x 12” factory closing wheel option, attaches to H-frame $268.00MRT089903 BSCW899 9” double closing wheel set, Case IH planters and John Deere & Kinze planters with shallow closing attachments, replaces OEM covering discs $120.00SCW75B4Spading-Closing WheelSCW75B4D20 PointDimple-Closing WheelSCW1564Spading-Closing WheelSCW1564D20 PointDimple-Closing WheelVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 21Advantages include:• It allows the depth gauge wheels to follow the ground terrain allowing the unit to travel smoothly in all field conditions• More equal compaction on either side of the disk enhances seed to soil contact and equal emergence• Consistent seed depth control• Longer seed disk life in rocky conditions• Life of depth gauge wheels is greatly extended in all rocky and no-till conditions• Less bearing failure on depth gauge wheels• Includes installation hardwareThe Depth-A-Matic can easily be installed on your planter in approximately ten minutes per row. Simply remove one depth control wheel, remove snap ring from pin, remove pin that holds depth stop and remove old depth stop. Then install the Depth-A-Matic in its place, with our replacement bolt and locknut.John Deere7000 7100John Deere720073001700RockerdePTH-a-MaTiCQuiCK CranK TrasHWHiPPer adjusTerProvides the Opportunity to Raise Heightof Residue Managers an Additional 3/4”For Factory Installed, Pin-Adjust, Yetter Residue Managers on John Deere PlantersWill only work with Yetter model #2967-15 fixed row cleanersDepth-A-MaticProduct ID Description PriceDAM001000Depth-A-Matic, John Deere 7000, 7100; Kinze (except Kinze 3000 series) and New Idea planters $32.95DAM002000Depth-A-Matic, John Deere 7200, 7300 and 1700 series (except John Deere XP row units) $41.95Depth-A-Matic Replacement PartsDAM003100 Rocker, for Depth-A-Matic $13.95DAM003200 Roll pin, for Depth-A-Matic $0.50Quick Crank Trashwhipper AdjusterProduct ID Description PricePLT130602 Quick Crank Trashwhipper Adjuster $99.00PLT130601 Crank Handle $20.00Features:• Converts fixed pin-adjust residue managers to screw-adjust• Height adjustments can be made in seconds while standing in front of the planter• Extremely quick – approximately 60 seconds to adjust 12 rows• Allows adjustments to be made easily in the field as conditions change• Installation requires no cutting or welding of original residue managers or on the planter • Provides the opportunity to raise height of residue managers an additional 3/4”• Powder coat paintedPLT130601800.368.7773CALL TOLL-FREE TO ORDER TODAY.22Are you ready for planting?Where will you be when the planter runs out of seed? Eliminate the frustration of the uncertain. You can save time and steps during the busy planting season by installing the Seed Level Indicator on one or more of your planter seed boxes. It’s easy and will save you time.Product ID Description PricePLT100500 Seed Level Indicator $ 129.95seed leVel indiCaTorone WrenCHWorks in Seconds - One Hand, One MotionThe unique design of the new One WrenchTM allows you to adjust the depth of the John Deere 750 & 1850 Grain Drills with only one hand in one quick motion. The design incorporates several pads that are used to depress the locking pin of the adjusting plate. Upon releasing the locking pin you can adjust the grain drill to the desired depth. Patent No. 7249391Product ID Description PriceDRL010001 One Wrench $59.95 Adjusts John Deere 750 & 1850 Grain Drills Depth Using Only One Hand and One WrenchConversion kit includes:1. Seed block for finger pick-up seed box2. Metric bolt and nut3. Detailed instructions for complete installationConversion Kit to Adapt to Kinze Brush-Type Seed Meterto Fit a John Deere 7200, 7300 and 1700 Series Finger Pick-up Seed BoxKinze brusH MeTer adaPTerProduct ID Description PricePLT000100 Adapter kit, to install Kinze brush meter on John Deere 7200, 7300 and 1700 series planter $9.95Note: Will not work on Kinze Brush Meters manufactured after July 2010 because the shaft is now hardened and very difficult to modify.VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 23Original, Field Tested And Proven Quick-Adjusting Pivot Arm Replacement Kits With O-Ring Grease SealsPlanTer PiVoT arM KiTsAll pivot arm kits include:• 2- Heavy duty cast pivot arms with o-ring grooves• 2- Counterbored, heat-treated bushings with a grease groove• 4- O-rings for pivot arms• 2- Key handle wrenches used for adjustment• 2- 7-gauge flat washers used for installation• 10- 14 gauge shim washers used for adjustment• Installation instructionsNote: Bolts for planter re-installation not included.V-Closing WHeelConVersion braCKeTWhite PlanterCase-IH PlanterV-Closing Wheel Bracket, White 5000 & 6000 Series PlantersProduct ID Description PricePLT125001Bracket kit, to convert planter to v-closing wheels Includes shim washers for spacing wheels to desired width Will only fit planters if H-bracket arm is straight and down pressure springs are on the inside. $39.95V-Closing Wheel Bracket, Case-IH 800 & 900 Series PlantersPLT125101Bracket kit, to convert planter to v-closing wheels Includes shim washers for spacing wheels to desired width$79.95Planters with Roll Pin Gauge WheelsProduct ID Description PricePLT110120Pivot Arm Kit, John Deere 7000, 7100, 7200, 7300; Kinze 2000 series prior to 1993 Pivot arm mounts to planter on 1” diameter pin$75.95Planters with Bolt-On Gauge WheelsProduct ID Description PricePLT110100Pivot Arm Kit, John Deere 7000, 7100, 7200, 7300, 1700 series; Kinze 2000 series 1993-1999 Pivot arm mounts to planter on 1” diameter pin.$75.95PLT110115Pivot Arm Kit, John Deere 1700 series with self-aligning bushing. Pivot arm mounts to planter with 16mm x 100mm bolt. John Deere’s self-aligning bushing is not re-used. Kit includes new threaded spindle, bolt and lock washer. Note: For XP row units must purchase 5/8” bolts for gauge wheels.$85.95Planters with Set Screw Gauge WheelsProduct ID Description PricePLT110140Pivot Arm Kit, John Deere 7200, 7300 (1992 and newer), 1700 series Pivot arm mounts to planter on 1” diameter pin.$75.95PLT110146Pivot Arm Kit, John Deere 1700 series with self-aligning bushing Pivot arm mounts to planter with 16mm x 100mm bolt. John Deere’s self-aligning bushing is not re-used. Kit includes new threaded spindle, bolt and lock washer.$85.95Pivot Arm Replacement PartsProduct ID Description PricePLT110200 Pivot arm only, threaded, each $29.95PLT110210 Pivot arm only, roll pin, each $29.95PLT110220 Pivot arm only, set screw, each $29.95PLT110180 Bearing Kit, includes 2 gauge wheel bearings, 5/8” x 3” bolts and lock washers $17.95PLT110250 Bearing, 40mm, for gauge wheels $7.95PLT110251 Counterbored bushing, each $5.95PLT110254 O-ring, (2 required per arm) each $0.40PLT110256 Shim washer, 14-gauge, each $0.30PLT110257 Key handle wrench, without washer, each $3.75PLT110264 Flat washer, 7-gauge, 1/2” ID, each $0.95800.368.7773CALL TOLL-FREE TO ORDER TODAY.24Parts Include: · New and improved bracket allows opportunity to offset the V-Closing wheels· Hardened hex step bushings that are replaceable; saves wear and tear on the bracket· Hardened 1” eccentric bushings to correct misalignment· Heavy duty down pressure spring· Cast “T” handle for quick adjustment of down pressure· Bolt and locknut for handleUpdate Your John Deere And Kinze Planter For Quick And Easy Down Pressure AdjustmentS.I. Distributing offers a service to rebuild existing John Deere V-Closing wheel brackets. The old worn-out ears are cut off and new hex style ears are welded on while in a jig to insure proper alignment. Includes hex step bushings and new eccentric bushings.Rebuild Your OEM Closing Wheel BracketRebuilt John DeereCast BracketRebuilt John Deere7200, 7300 BracketClosing WHeel braCKeTsWhite 6000Series BracketClosing Wheel Bracket Replacement PartsProduct ID Description PricePLT120550 Eccentric bushing, for 1/8” ears, each $2.39PLT120650 Eccentric bushing, for 1/4” hardened ears, each $5.95PLT120660 Eccentric bushing, for hex style ears, each $3.79PLT120661 Hex step bushing, each $1.69PLT120750 T-handle, painted green, each $8.95PLT120753 T-handle, painted black, each $8.95PLT120751 Spring, each $7.95White 6000 Series Rebuild KitProduct ID Description PricePLT120618Rebuild Kit, White 6000 Series. Kit includes new bolt-on arms, eccentric bushings, hex bushings and hardware.$25.00Closing Wheel Bracket Rebuild ServiceProduct ID Description PricePLT120610 Rebuild John Deere 7200, 7300 closing wheel bracket $29.95PLT120630 Rebuild John Deere 1700 Series cast closing wheel bracket $29.95PLT120640 Rebuild Kinze closing wheel bracket with bolt-on closing wheels $29.95Closing wheel bracket is sent to S.I. Distributing where the old worn-out ears are cut off and new hex style ears are welded on while in a jig to insure proper alignment. Price includes new eccentric bushings, hex step bushings and repainting.Closing Wheel Bracket KitsProduct ID Description PricePLT120700Closing Wheel Bracket, John Deere 7000, 7100 with roll pin attached wheels$59.95PLT120710Closing Wheel Bracket, Kinze 1993 and earlier with roll pin attached wheels$59.95PLT120720Closing Wheel Bracket, Kinze 1994 and newer with bolt-on wheels$59.95PLT120730Closing Wheel Bracket, John Deere 7000, 7100 converted to bolt-on wheels. Includes hardware kit to bolt wheels on bracket.$59.95PLT120740Closing Wheel Bracket, John Deere 7200, 7300, 1700 converted to bolt-on wheels. Includes hardware kit to bolt wheels on bracket.$59.95Note: Bolts to install bracket on planter and closing wheels are not includedVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 25The problem:Seed coverage is the biggest problem in no till planting. It is not unusual to see no-till corn laying in an open seed trench only to germinate if and when rain occurs to help put soil around the seed. Since there is no loose soil to speak of and the ground tends to be more moist in no-till, the seed trench doesn’t close behind the opener. Many researchers have suggested the double, angled-type of press wheels as the best all-around answer to the seed coverage problem. Cast Iron Angled Closing Wheels that squeeze the seed trench together are definitely superior to the standard type, especially in reduced tillage. The extra weight of the cast iron and the narrow rolling edge (obtainable only by a solid cast wheel) squeeze the seed trench together for good soil to seed contact.The solution:• Better plant emergence• More even plant population• Helps retain valuable moisture for faster germination• Can be used in conventional tillage with proper spring tension• Wheels are made to interchange easily with original press wheels on Max-Emerge, Kinze, New Idea and Yetter planters• The precision sealed bearing can be easily changed with removable snap ring• The wheel is made of rugged, thick, cast iron• Weigh 45 pounds per row• One year workmanship guarantee on unitSuccessful No Till Planting Depends On The Closing Of The Seed TrenchPushing the Seed Trench TogetherCasT-ironClosing WHeelsWheel Diameter: 13”Material: Ductile ironAdvantages vs. regular cast wheels• Lighter weight• Less compaction• Fins will break up clods and fine up the topsoil• Better in dry, no-till conditionsClose-n-Till CasT WHeelsComparison Weight of Closing Wheels (each)Rubber Wheel ......................................... 3.5 lbs. 13” Martin Spike Wheel .....................12.0 lbs.15” Martin Spike Wheel .....................14.5 lbs.Finger-Till Wheel ..................................16.2 lbs.Close-N-Till Wheel ...............................17.3 lbs. Regular Cast Iron Wheel ....................23.0 lbs.• More aggressive • Reduces sidewall compaction• Lightly tills the soil• Faster seed emergence• 15” in diameter• Better in wet, no-till conditionsfinger-TillCasT WHeels12” in DiameterCast Iron Closing WheelsProduct ID Description PricePLT110000Cast iron closing wheel, John Deere 7000, 7100; Kinze 1993 & prior, each Water pump style bearing$60.00PLT110010 Cast iron closing wheel, John Deere 7200, 7300, 1700 series, each Bearing ID = 16.95mm $60.00PLT110020Cast iron closing wheel, John Deere 1700 series, Kinze 1994 & newer, White 6000, 8000, 9000 series, each Bearing ID = 5/8”$60.00Cast Iron Closing Wheel Replacement PartsProduct ID Description PricePLT110001 Bearing, for John Deere 7000, 7100; Kinze 1993 & prior, each Water pump style bearing; one bearing per wheel $16.00PLT110011 Bearing, outside, for John Deere 7200, 7300, 1700 series, each Bearing ID = 16.95mm; one outside & one inside bearing per wheel $7.50PLT110022 Bearing, inside, for John Deere 7200, 7300, 1700 series, each Bearing ID = 16.95mm; one outside & one inside bearing per wheel $10.95PLT110021 Bearing, for Kinze 1994 & newer, White 6000, 8000, 9000 series, each Bearing ID = 5/8”; two bearings per wheel $9.75PLT110002 Snap ring, for John Deere 7000, 7100; Kinze 1993 & prior, each $1.00Close-N-Till Cast WheelsProduct ID Description PricePLT110030Close-N-Till Wheel, 5/8” bearing, for John Deere 1700 series, Kinze 1994 & newer, White 6000, 8000, 9000 series planters that use 5/8” bolt to attach closing wheels. $73.00PLT110040Close-N-Till Wheel, 17mm bearing, for John Deere 7200, 7300, 1700 series planter with a 16.95 mm threaded spindle on closing wheel frame. $73.00PLT110050Close-N-Till Wheel, water pump bearing, for John Deere 7000, 7100 series, Kinze 1993 & prior planters where closing wheels are attached with roll pin. $73.00Finger-Till Cast WheelsProduct ID Description PricePLT110060Close-N-Till Wheel, 5/8” bearing, for John Deere 1700 series, Kinze 1994 & newer, White 6000, 8000, 9000 series planters that use 5/8” bolt to attach closing wheels. $91.00PLT110070Close-N-Till Wheel, 17mm bearing, for John Deere 7200, 7300, 1700 series planter with a 16.95 mm threaded spindle on closing wheel frame. $91.00PLT110080Close-N-Till Wheel, water pump bearing, for John Deere 7000, 7100 series, Kinze 1993 & prior planters where closing wheels are attached with roll pin. $91.00800.368.7773CALL TOLL-FREE TO ORDER TODAY.26aCre Plus seed box ToPPerSave time, labor and money. The Air Design scraper will outlast and outwear standard cast scrapers and they can’t flip over and fall off. The scraper features a special tungsten carbide cutting edge. You’ll get superior performance and reduce tedious replacement time.Includes hardware for installation.• OEM color matched plastic construction• Plastic mold injection process insures better fit with one-piece snap-on design• No modification to original seed box, use existing seed box lid• Adds one bushel to seed box capacity - Plant more acres between fills• Fit John Deere 7200, 7300 (1995 and newer), & John Deere 1700 series poly boxes• Fit Kinze 3000 series poly boxes (2001 and newer)• Not recommended for fiberglass constructed boxes• Adds 7-1/4” to height of planter seed boxThe AIR DESIGN scrapers feature an extremely simple design with a special tungsten carbide edge. The tungsten carbide provides outstanding abrasion resistance along with toughness to give superior, long-lasting performance and reduces the need for replacement.air designPlanTer sCraPersair design drill sCraPersKinzeJohn Deere• Aggressive cleaning action• Enhances seed depth placement accuracy• Easy to install• No drilling or other hardware requiredTungsten carbide edge will outlast OEM steel scrapers by a factor of 100 to 1.Tungsten carbide edge will outlast OEM steel scrapers by a factor of 100 to 1.Product ID Description PricePDM030000 Acre Plus, John Deere 7200, 7300 poly boxes (1995 & newer), 1700 series $29.95PDM031000 Acre Plus, Kinze 3000 series poly boxes (2001 & newer) $29.95Product ID Description PriceADC210601 Scraper kit, John Deere 1890, 1895, right disc $38.95ADC210602 Scraper kit, John Deere 1890, 1895, left disc $38.95ADC210750 Scraper kit, Krause, all $22.95ADC210801 Scraper kit, Case-IH SDX, right disc $38.95ADC210802 Scraper kit, Case-IH SDX, left disc $38.95ADC210950 Scrapter kit, Great Plains 00HD opener $24.95ADC700000 Scraper kit, Case-IH 620, 6200 $19.95ADC700200 Scraper kit, Case-IH 5400, 5500, left leading disc $13.95ADC700300 Scraper kit, Case-IH 5400, 5500, right leading disc $13.95ADC800000 Scraper kit, John Deere 455, 730, 1060, 8300, 9350 $19.95Product ID Description PriceADC210490 Scraper kit, outside, John Deere 7000, 7100, Kinze. 1-piece design. Includes 2 scraper/arm assemblies and 1 spring. No modifications or holes to drill. $34.95ADC210500 Scraper kit, outside, John Deere 7000, 7100, Kinze. 2-piece design. Includes 2 scrapers, 2 arms and 1 spring. No modifications or holes to drill. $33.75ADC210880 Scraper kit, outside, John Deere 7200, 7300, 1700-30, 1750-80. 1-piece design. Includes 2 scraper/arm assemblies and 1 spring. No modifications required. $34.95ADC210510 Scraper kit, outside, John Deere 7200, 7300, 1700-30, 1750-80. 2-piece design. Includes 2 scrapers. Reuse original John Deere arms and spring. No modifications required. $22.95ADC210530Scraper kit, outside, White 6000, 8000 series. Includes 2 scrapers, 2 adapter plates and 2 shims. Reuse original White arms.$24.95ADC210560 Scraper kit, outside, Case-IH 800, 900, 1200 series. Includes 2 scrapers. Reuse original Case-IH arms and rivets. $28.95ADC210670 Scraper kit, inside, Case-IH 955, 1200, left leading disc $22.95ADC210680 Scraper kit, inside, Case-IH 955, 1200, right leading disc $22.95ADC210700 Scraper kit, inside, John Deere 7200, 7300, 1700 series; non-cast shank $31.95ADC210740 Scraper kit, inside, John Deere 7200, 7300, 1700 series; cast shank $31.95VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 27Marker Weight For No-TillSURE MARK is a 12-1/2 pound weight that simply bolts on the dish of your marker disk. The additional weight of SURE MARK will assist the disk to cut a much deeper furrow in No-Till planting. For extremely hard No-Till conditions, another weight can be added. When placing an order please measure the hub bolt pattern from center-to-center of each bolt and the distance that the hub extends beyond the marker blade. Longer bolts for installation are not included.Description PriceSure MarkPlease specify make, model and hub bolt pattern when ordering. $29.95 sure MarK MarKer WeigHT• Prevents rocks from bending planter units and twisting depth control arms• Reduces bending and breaking of depth gauge wheels• Helps prevent plugging of rocks and residue between depth gauge wheel and planter drive wheel• Made of heavy gauge steel• Includes all mounting hardwareProduct ID Description PricePLT130500 Gauge wheel cover, each $12.95For John Deere, Kinze and White Plantersgauge WHeel CoVer• Keeps your planter V-Closing wheels free of old stalks, lumps of soil and other field debris• Improves planting results• Saves time and money on maintenance• For all John Deere, Kinze and White planters• Bolts easily between the closing wheels• Includes installation hardwareTrasH guardProduct ID Description PricePLT126000 Trash guard kit, John Deere, Kinze and White planters $9.95800.368.7773CALL TOLL-FREE TO ORDER TODAY.28This Package Equals or Exceeds Competitive Designsin Down Force in the Normal Working Range.• Variable settings• Maximum down pressure up to 700 lbs.• Will fit all Kinze and John Deere planters with steel (not cast) parallel linkage arms providing there is enough room on the inside of the arms• On John Deere 7200, 7300 row units, the holes in the parallel linkage arms will need to be enlarged.For John Deere 7000, 7100 and Kinze PlantersBenefits include:• Replaces worn bushings in parallel linkage for John Deere 7000, 7100 and Kinze Planters• Oversized bushings last up to four times longer• Special designed bolts have a shoulder so the bushings don’t wear on the bolt threads• No need to replace parallel linkage because holes are enlarged to accept the new bushings• Insures a precise fit to eliminate movement between the bushing and the boltdoWn Pressure sPring PaCKageParallel linKage rebuild KiTs• For John Deere 7000, 7100 and Kinze planters must drill out parallel linkage to 1-3/32”.• For John Deere 7200, 7300, 1700 series planters no drilling is required. Kit includes same size bushing as original.Kit includes:• 8 oversized bushings• 8 special shouldered grade 5 bolts• 8 grade 5 locknutsEach package includes:4 - Detent pins4 - Anchors4 - Heavy duty down pressure springsParallel Linkage Rebuild KitProduct ID Description PricePLT130100 Parallel linkage rebuild kit, per row $29.95Note: Will not work with parallel linkage mounted attachmentsDown Pressure Spring KitProduct ID Description PricePLT141000 Down pressure spring kit, per row $79.00PLT141001Down pressure spring kit with plate, per row Note: The spring kit with plate is for planter row units that currently do not have a plate installed to hold the u-bolts square and keep the parallel linkage from twisting.$99.00Down Pressure Spring Kit ComponentsProduct ID Description PricePLT141010 Detent pin, 4 per kit, each $3.89PLT141011 Anchor, 4 per kit, each $9.75PLT141012 Spring, 4 per kit, each $7.25Parallel Linkage Rebuild Kit ComponentsProduct ID Description PricePLT130101 Bushing, 8 per kit, each $1.95PLT130102 Bolt, 5/8” x 1-3/4”, 6 per kit, each $1.90PLT130103 Bolt, 5/8” x 2-1/4”, 2 per kit, each $2.10PLT130104 Nut, 5/8” lock, 8 per kit, each $0.40VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 29Population Monitor for Planters and Grain DrillsThe M3 was designed from the ground up to be accurate, user friendly, dependable and affordable. Using an Intel® microprocessor the M3 monitors speed, area, population, hopper levels, limit switch status, seed spacing, and row failure to keep the operator informed of the current status of the planter or drill.The M3 has two separate sets of setup parameters that may be entered and retained, eliminating the need to re-enter values when switching planters or drills. Every feature of the M3 has been designed to be as simple to operate as possible, thereby eliminating confusion and unnecessary down time in the field.Each Kits Includes:• M3 Monitor Console • Power Cable • Cab Harness • Planter or Grain Drill Harness • DICKEY-john® High-Rate Seed Sensors • New Seed Tubes for Planters • Seed Tube Adapters for Drills (if required) • Instruction ManualM3 MoniTor sysTeMM3 Monitor Drill KitsProduct ID Description PriceAGT30040102 M3 Kit, 4-row drill, rigid, 10-20’ $1,209.00AGT30040202 M3 Kit, 4-row drill, folding, 20-25’ $1,375.00AGT30040302 M3 Kit, 4-row drill, folding, 30’ $1,430.00AGT30040402 M3 Kit, 4-row drill, tandem, 10-15’ $1,485.00AGT30060102 M3 Kit, 6-row drill, rigid, 10-20’ $1,650.00AGT30060302 M3 Kit, 6-row drill, 3-fold, 30’ $1,650.00AGT30080102 M3 Kit, 8-row drill, rigid, 10-20’ $1,925.00AGT30080302 M3 Kit, 8-row drill, front fold, 30’ $2,035.00AGT30080402 M3 Kit, 8-row drill, tandem, 10-15’ $2,035.00AGT30120102 M3 Kit, 12-row drill, rigid, 10-20’ $2,475.00AGT30160202 M3 Kit, 16-row drill, folding, 20-25’ $3,135.00AGT30160203 M3 Kit, 16-row drill, folding, 30’ $3,135.00M3 Monitor Planter KitsProduct ID Description PriceAGT30045051 M3 Kit, 4-row planter, rigid, John Deere 7000, 7100, Kinze $1,375.00AGT30045052 M3 Kit, 4-row planter, rigid, John Deere 7200, 7300, 1700 series $1,375.00AGT30065051 M3 Kit, 6-row planter, rigid, John Deere 7000, 7100, Kinze $1,650.00AGT30065052 M3 Kit, 6-row planter, rigid, John Deere 7200, 7300, 1700 series $1,650.00AGT30085051 M3 Kit, 8-row planter, rigid, John Deere 7000, 7100, Kinze $1,925.00AGT30085052 M3 Kit, 8-row planter, rigid, John Deere 7200, 7300, 1700 series $1,925.00AGT30085251 M3 Kit, 8-row planter, rear fold, John Deere 7000, 7100, Kinze $2,035.00AGT30085252 M3 Kit, 8-row planter, rear fold, John Deere 7200, 7300, 1700 series $2,035.00AGT30085351 M3 Kit, 8-row planter, front fold, John Deere 7000, 7100, Kinze $2,035.00AGT30085352 M3 Kit, 8-row planter, front fold, John Deere 7200, 7300, 1700 series $2,035.00AGT30125051 M3 Kit, 12-row planter, rigid, John Deere 7000, 7100, Kinze $2,475.00AGT30125052 M3 Kit, 12-row planter, rigid, John Deere 7200, 7300, 1700 series $2,475.00AGT30125251 M3 Kit, 12-row planter, rear fold, John Deere 7000, 7100, Kinze $2,585.00AGT30125252 M3 Kit, 12-row planter, rear fold, John Deere 7200, 7300, 1700 series $2,585.00AGT30125351 M3 Kit, 12-row planter, front fold, John Deere 7000, 7100, Kinze $2,585.00AGT30125352 M3 Kit, 12-row planter, front fold, John Deere 7200, 7300, 1700 series $2,585.00AGT30165051 M3 Kit, 16-row planter, rigid, John Deere 7000, 7100, Kinze $3,025.00AGT30165052 M3 Kit, 16-row planter, rigid, John Deere 7200, 7300, 1700 series $3,025.00AGT30165251 M3 Kit, 16-row planter, rear fold, John Deere 7000, 7100, Kinze $3,135.00AGT30165252 M3 Kit, 16-row planter, rear fold, John Deere 7200, 7300, 1700 series $3,135.00AGT30165351 M3 Kit, 16-row planter, front fold, John Deere 7000, 7100, Kinze $3,135.00AGT30165352 M3 Kit, 16-row planter, front fold, John Deere 7200, 7300, 1700 series $3,135.00M3 Monitor AccessoriesProduct ID Description PriceAGT10003389 Sensor, drill, Dickey-john, high-rate $101.95AGT10003795 Power cable, M3 monitor, 18’ $28.00AGT10005800 Cab cable, M3 monitor, Computer-Trak pinout, 12’ $85.00AGT10006552 Adapter kit, John Deere drill seed tubes $20.00AGT10006518 Limit switch kit (disables acre counter when implement is raised) $90.00AGT10006525 Gear tooth sensor kit, for RPM or ground speed sensing $120.00AGT10009000 Cab cable, M3 monitor, DICKEY-john pinout, 12’ $85.00AGT1050300001 M3 console, includes DICKEY-john cab cable $925.00AGT1050300002 M3 console, includes Computer-Trak cab cable $925.00MTS901425 Astro 5 GPS Speed Sensor, 5Hz update rate $467.00MTS901413 Astro II GPS Speed Sensor, 1Hz update rate $347.00800.368.7773CALL TOLL-FREE TO ORDER TODAY.30• Frees up the front of the planter for other attachments• Allows for split applications of two different types of fertilizer• No sideways movement of residue• High pressure assures excellent placement of fertilizer• Mounts directly on the planter unit – no extra tool bars required• Low maintenance and low draft• 13” double-beveled coulter blade• Applies fertilizer approximately 3” to either side of the row• Trail-Jet requires a constant pressure pump; not a squeeze pumpAvailable For:John Deere Series7000-73001700 Kinze Series20003000Case-IH Series 8009001200White Series6000 8000Applies Liquid Fertilizer Behind the Planter• Designed to keep insecticide in place during windy planting conditions• Soft flexible material will not affect flow pattern of insecticide• Uses existing hardware to mount to bander• Available for Kinze, John Deere, and models using insecticide bander as shown in pictureProduct ID Description PricePDM050000 Insecticide skirt $5.50 Trail-jeT ferTilizer oPenerinseCTiCide sKirTTrail-Jet Fertilizer OpenerProduct ID Description PriceTJT001000 Trail-Jet, Monosem units $259.00TJT001200 Trail-Jet, Case-IH 1200 series; Will not fit 1220 $249.00TJT003000 Trail-Jet, Kinze 3000 series $249.00TJT006000 Trail-Jet, White 6000 series $249.00TJT007000 Trail-Jet, John Deere 7000, 7100 series, Kinze 2000 series $235.00TJT007200 Trail-Jet, John Deere 7200, 7300, 1700 series with MaxEmerge 2 row units $235.00TJT007500 Trail-Jet, John Deere 1700 series with MaxEmerge Plus row units $249.00TJT007600 Trail-Jet, John Deere 1700 series with MaxEmerge XP row units $251.00TJT007700 Trail-Jet, John Deere 1700 series with Pro-Series XP row units $251.00TJT008000 Trail-Jet, Case-IH 800, 900 series $269.00TJT008100 Trail-Jet, White 8000 series $249.00Note: Price is per row and does not include pump or hoses. Nozzles are sold separately. Trail-Jet NozzlesProduct ID Description PriceTJT830002 Stainless steel nozzle, 5 gallons per acre $15.50TJT830003 Stainless steel nozzle, 10 gallons per acre $15.50TJT830004 Stainless steel nozzle, 15 gallons per acre $15.50TJT830005 Stainless steel nozzle, 20 gallons per acre $15.50TJT830006 Stainless steel nozzle, 25 gallons per acre $15.50TJT830008 Stainless steel nozzle, 30 gallons per acre $15.50TJT830010 Stainless steel nozzle, 40 gallons per acre $15.50VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 31sHield ag drill disCsThese Extreme Conditions Discs are more than 17% thicker to last longer in dry and abrasive conditions, and they are more than 36% stronger to resist breakage in the toughest ground. These drill discs are made from high quality chrome-boron steel for toughness and improved ability to penetrate, scour and self-clean.Extreme Conditions Drill Discs• Extreme conditions discs are made of earth-metal, chrome-boron steel• Built for toughness; improved ability to penetrate, scour and self-clean• Available as blade only, single disc assembly and boxed sets of two disc assemblies• 205 series bearing with triple-lip seals on both sides• 3.5mm blades are 17% thicker than 3.0mm OEM blades• Last longer in dry and abrasive conditions• 36% stronger to resist breakage in the toughest groundAPL135050 APL135052 APL150050 APL135000 APL180000ShieldAg Drill DiscsProduct ID Description OEM ID Diam. Bearing Thick. Dust Cover Shims Smooth Notched Qty. PriceAPL135050 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills107-130S 107-133S 107-135S 107-138S13.5” 205, 5/8” 3.5mm x 1 $38.00APL135051 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 13.5” 205, 5/8” 3.5mm 2 6 x 2 $75.00APL135052 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 13.5” 205, 5/8” 3.5mm x 1 $42.00APL135053 Drill disc assembly, Great Plains All 13-1/2 double disc opener drills 13.5” 205, 5/8” 3.5mm 2 6 x 2 $83.00APL150050Drill disc assembly, Great Plains HD, 15 & 25 series drills Yield Pro planters 404-072S 404-121S15” 205, 5/8” 4mm x 1 $46.00APL150051Drill disc assembly, Great Plains HD, 15 & 25 series drills Yield Pro planters15” 205, 5/8” 4mm 2 6 x 2 $91.00APL135000Drill disc blade, John Deere 450, 455, 515 520, 1520, 8100, 8200, 8250, 8300, 8350, 8500, 8550, 9400, 9450 conventional drills; 730, 770, 780, 1060 air seedersN164594 N283805 13.5” none 3.5mm x 1 $18.00APL180000Drill disc blade, John Deere 750, 1560, 1590, 1690, 1850, 1860, 1890, 1895, 1990 Note: This is a double beveled blade that improves penetration.N214190 N283804 18” none 5mm x 1 $44.00800.368.7773CALL TOLL-FREE TO ORDER TODAY.32Firming Wheels ComparedWheelInformationTireDesignProfileMaximum Width (Inches)Durometer (compound hardness)Wheel Design CharacteristicsAbility toFlex Within Seed SlotJohn DeerePart NumberAN2813590.982 82 Rubber tire with 2 steel wheel halves NoJohn DeerePart NumberAN2822960.831 80Rubber tire with 2 plastic wheel halvesNoNeedham AgV8Firming Wheel0.596 95Flexible rubber wheel design with tapered shape to match seed slotYesProduct ID Description PriceDRL400001 Needham AG V8 firming wheel,John Deere drill $39.95needHaM agV8 firMing WHeelNeedham Ag Technologies, LLCDesigned a New and ImprovedSeed Firming Wheel Called V8.Features: • John Deere’s single disc opener creates a seed slot that is almost vertical on the disc side with an angled sidewall on the opposite boot side• John Deere’s firming wheel is too wide to fit down into the angled seed slot, especially in no-till conditions• Needham Ag V8 firming wheel is designed to closely match the profile of the seed slot• Needham Ag V8 firming wheel pushes the seed into the bottom of the seed slot for uniform access to soil moisture• Needham Ag V8 firming wheel promotes more even seed emergence, even in low soil moisture conditions• Needham Ag V8 firming wheel incorporates a 5203 bearing for longer service life• Needham Ag V8 firming wheel includes mounting bolt, lock nut, spacer and installation instructions• Fit John Deere 750, 752, 1560, 1590, 1850, 1860, 1890 and rear 2 gangs on 1895www.needhamag.com• Start applying anhydrous and 28% fertilizer when crop is smaller.• Drive faster without covering corn.• Moves ground where knife ran for better sealing. • Prevents loss of anhydrous and 28% fertilizer.• Prevents the possibility of open slots in dry conditions.• Purchasing without discs and using your planter’s worn seed discs makes it economical.• Independent arms reduce clogging and dragging of residue.• Powder coat painted frames.• No springs; simple and low maintenance.• Only needs greased every 200-300 acres and before storing for the season.nH3 disC sealersNeedham Ag V8 wheel installedon John Deere drillJohn Deere 1” firming wheel is too wide to fit down within the seed slotNeedham Ag V8 wheel is downwithin the seed slotNH3 Disc SealersProduct ID Description PriceGRB100000 Disc Sealer, straight shank, 2” wide $199.00GRB200000 Disc Sealer, straight shank, 1” wide $199.00GRB300000 Disc Sealer, coiled shank $199.00VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 33Individual row unit down pressure is available on the Case SDX series and this feature is particularly useful when setting up their no-till drills. Often the amount of down pressure required to pen-etrate the soil is higher behind tractor and mid-cart wheel tracks, so additional force can be added to these individual units using the pin hole configuration illustrated in the left photo.In the past, operators of John Deere single disc seeders have not had the luxury of this adjustment and frequently the amount of down pressure in wheel tracks is not high enough to ensure consistent soil engagement. If down pressure is elevated to achieve penetration within the wheel tracks, then units not within previous wheel tracks usually have excessive down pressure. This is a concern because it commonly results in sidewall compaction.Needham Ag Technologies, LLC is proud to offer the new Spring Compression Spacers for John Deere single disc seeders. They are easily installed within the compression spring hous-ing by loosening the tension on the bolt and installing the spacer. Depend-ing on the width of the seeder, the size of the tires on the cart and tractor and the row spacing, 4-8 of these spacers may be required for a John Deere drill or seeder.Each spacer provides around 70 lb of additional down force.Product ID Product Description PriceDRL400100 John Deere 750, 1850 $26.25DRL400200 John Deere 1560, 1590, 1860, 1890, 1895 $26.25sPring CoMPression sPaCersFor John Deere Single Disc SeedersjoHn deere seed booTsDRL280446DRL280447DRL282788 DRL282789 DRL283432 DRL283433John Deere Drill Seed BootsProduct ID Product Description PriceDRL280446 Seed Boot, John Deere 750, 1850, right hand $26.75DRL280447 Seed Boot, John Deere 750, 1850, left hand $26.75DRL282788 Seed Boot, John Deere 1560, 1565, 1860, top right hand $15.50DRL282789 Seed Boot, John Deere 1560, 1565, 1860, top left hand $15.50DRL283432 Seed Boot, John Deere 1560, 1565, 1860, bottom right hand $15.00DRL283433 Seed Boot, John Deere 1560, 1565, 1860, bottom left hand $15.00DRL283730 Seed Boot, John Deere 1560, 1590, 1890, 1-piece right hand For drills that have been converted to the 1-piece seed boot $33.00DRL283731 Seed Boot, John Deere 1560, 1590, 1890, 1-piece left hand For drills that have been converted to the 1-piece seed boot $33.00DRL283730 DRL283731800.368.7773CALL TOLL-FREE TO ORDER TODAY.34KeeTon seed firMersKeeton Seed Firmer Planter Application GuideMake Models Installation Options Notes Tail Options Product ID PriceCase-IH400, 500 800, 900 5400, 5500Seed Boot MountMounts to seed boot. Also fits 5400 and 5500 Soybean Special drills Will NOT fit seed boot #82443285Short low profile tail (liquid not available) KTN101004 $30.50Great Plains Yield-Pro Seed Tube Mount Mounts to seed tube. Standard dry tail KTN101000 $31.50Standard liquid tail KTN101001 $32.50John Deere7000 7100 7200 7300 1700 Series 1530 Drill 1535 DrillUniversal Bracket Fits Wave VisionBracket mounts to seed disk opener shafts and around row unit shank.Standard dry tail KTN125012 $37.00Standard liquid tail KTN115011 $37.00Short low profile tail KTN126008 $37.00Long low profile tail KTN121004 $37.00Kinze (Gold) Bracket Fits Wave VisionMounts inside row unit between scrapers. Will NOT work with spring loaded disk scrapers. Will NOT fit 7200, 7300 or 1700. Standard dry tail KTN125013 $37.00Standard liquid tail KTN115012 $37.00Short low profile tail KTN126009 $37.00Long low profile tail KTN121005 $37.00Seed Tube Mount Mounts to seed tube. Also fits 1530, 1535 drills. Standard dry tail KTN101000 $31.50Standard liquid tail KTN101001 $32.50Kinze 2000 Series 3000 SeriesUniversal Bracket Fits Wave VisionBracket mounts to seed disk opener shafts and around row unit shank. Will NOT fit EdgeVac planters Will NOT fit 2013 mechanical meter plantersStandard dry tail KTN125012 $37.00Standard liquid tail KTN115011 $37.00Short low profile tail KTN126008 $37.00Long low profile tail KTN121004 $37.00Kinze (Gold) Bracket Fits Wave VisionMounts inside row unit between scrapers. Will not work with spring loaded disk scrapers. EdgeVac and 2013 mechanical meter planters requires drilling 2 holes.Standard dry tail KTN125013 $37.00Standard liquid tail KTN115012 $37.00Short low profile tail KTN126009 $37.00Long low profile tail KTN121005 $37.00Seed Tube MountMounts to seed tube. Will NOT fit EdgeVac Will NOT fit 2013 mechanical meter plantersStandard dry tail KTN101000 $31.50Standard liquid tail KTN101001 $32.50Monosem All Seed Tube Mount Mounts to seed tube. Standard dry tail KTN101000 $31.50Standard liquid tail KTN101001 $32.50White5000 Series 6000 Series 8000 Series9000 SeriesUniversal Bracket Fits Wave VisionBracket mounts to seed disk opener shafts. Bracket modification is required. Will NOT fit 5000 and 9000 series.Standard dry tail KTN125012 $37.00Standard liquid tail KTN115011 $37.00Short low profile tail KTN126008 $37.00Long low profile tail KTN121004 $37.00Seed Tube Mount Mounts to seed tube. Standard dry tail KTN101000 $31.50Standard liquid tail KTN101001 $32.50Case-IH Seed Boot Mount Seed Tube Mount Universal Bracket Mount Kinze (Gold) Bracket MountVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 3535Uneven seed germination and uneven plant emergence sap yields. Plants coming up even a little late can’t compete with their neighbors for resources and at pollination they’re vulnerable to heat stress and insects. Keeton Seed Firmers set the seed at the right depth and create consistent seed-to-soil contact. That leads to uniform germination, uniform emergence, and tests show, an average increase of six bushels per acre.KeeTon seed firMers• Set seeds to the bottom of the seed trench• Hit the depth you set on your planter• Ensures uniform seed-to-soil contact• Ensures uniform seed germination• Ensures uniform plant emergence• Research proves an average six bushel increase in corn yieldFirmer contact leads to uniform emergence leads to 1,000 more ears per acre.Keeton Planter Replacement TailsStandard Dry Tail Standard Liquid Tail Short Low Profile Tail Long Low Profile TailStandard tail with no liquid application tube. Use in non-sticky soils in all tillage environments. Works with WaveVision seed tube and all Keeton brackets.Standard tail with dual liquid application over the seed and split to the side walls of the seed trench. Use in non-sticky soils in all tillage environments. Works with WaveVision seed tube and all Keeton brackets. Low profile tail with splitter for liquid application. Use in sticky soil types and/or minimum tillage environments. Do not use low profile tail in sandy soil types. Works with WaveVision seed tube and all Keeton brackets. Low profile tail with liquid over the seed only (dry application recommended). Does not include a splitter. Use in sticky soil types and/or minimum tillage environments. Do not use low profile tail in sandy soil types. Works with WaveVision seed tube and all Keeton brackets.Product ID Price Product ID Price Product ID Price Product ID PriceKTN125011 $34.50 KTN115013 $34.50 KTN126010 $34.50 KTN121006 $34.50Keeton Planter Replacement PartsProduct ID Description PriceKTN125011 Replacement Firmer, dry tail only, fits in Universal or Kinze bracket $34.50KTN115013 Replacement Firmer, dual tube tail only, fits in Universal or Kinze bracket $34.50KTN126010 Replacement Firmer, short low profile tail only, fits in Universal or Kinze bracket $34.50KTN121006 Replacement Firmer, long low profile tail only, fits in Universal or Kinze bracket $34.50KTN111501 Bracket, Kinze Gold, with hardware $7.50KTN131500 Bracket, Universal, with hardware $7.50KTN150057 Pkg of 4, Bracket Kit for John Deere planters with Totally Tubular installed $28.00KTN900000 Tubing, blue, 1/4” diameter, per foot $0.25KTN900001 Hose clamp, for seed tube mount firmers $0.70KTN900002 Tie strap, black $0.12KTN900003 Tie strap, white $0.12KTN900004 Splitter insert $0.55KTN900017 Tubing, clear, 3/8” diameter x 2” long splice $0.10KTN900024 Tubing, red, 1/4” diameter, per foot $0.25HDW210245 Screw, 1/4-10 x 1-1/4, hex head slotted; for seed tube mount Keetons $0.35HDW210253 Screw, 1/4-20 x 1-3/4, hex head slotted; for bracket mount Keetons $0.35HDW210246 Screw, 1/4-10 x 1-3/4, hex head slotted; for seed tube mount Keetons with Mojo Wire $1.63800.368.7773CALL TOLL-FREE TO ORDER TODAY.36KeeTon seed firMersGet the money-making advantages of Keeton Seed Firmers for your drill, too. New field trials show that Firmers make you money in three ways: • Reduced seed costs. Improved germination means you get better stands with fewer seeds. On average, tests show a 9.4% increase in soybean germination. That translates to typical seed savings of about $2 per acre. • Increased soybean yields. Field tests show an average yield increase of over 7%. • Lower equipment and labor costs. Apply liquids as you plant with Keeton’s integrated liquid applicator tubes. Seed savings alone will pay for the Keeton Seed Firmers during the first year. Then you’ll profit year after year from the additional yield. Keeton Seed Firmers make a dramatic difference on shallow planted seeds like soybeans. Firming seeds into moisture and improving seed-to-soil contact improves germination. So you can reduce seeding rates of expensive seeds while maintaining productive stands. • Mounting brackets and instructions are included. • Drill firmers are only available with liquid tails. • For non-liquid use simply remove the tube from the tail.Standard Liquid Drill TailKeeton Drill Replacement PartsProduct ID Product Description PriceKTN210054 Tail, drill, standard liquid $27.50KTN210025 Tail, Sunflower drill, modified dry tail $30.50KTN210055 Tail, drill, narrow liquid (Recommended for Great Plains Yield Pro planters.) $27.50KTN900000 Tubing, blue, 1/4” diameter, per foot $0.25KTN900017 Tubing, clear, 3/8” diameter x 2” long splice $0.10Keeton Seed Firmer Drill Application GuideMake Models Installation Options Notes Tail Options Product ID PriceCrustbuster 3700, 3800 3400 w/o parallel arms Metal BracketMounts on scraper bracket. Will not fit 3400 All-Plant or 3400 Min-Till openers. Standard liquid tail KTN210002 $30.50Crustbuster 3400 Series 4000 Series Metal BracketMounts to scraper support rod. Fits All-Plant & Min-Till openers. Standard liquid tail KTN210004 $30.50Case-IH 5100 5400 Metal Bracket Mounts to scraper housing. Standard liquid tail KTN210006 $29.50Great PlainsFluted Metering Wheel Drills: 00, 05, 06, 07, 10 Series; 20 Series (-2003)Metal Bracket Mounts to scraper bracket. Standard liquid tail KTN210008 $29.50Great PlainsPrecision Drills (singulating & volumetric metering wheel): 10, 20 SeriesMetal Bracket Mounts to scraper bracket. Standard liquid tail KTN210010 $29.50Great Plains15, 25 Series Planter Style Row Units and HD10 Series Row UnitsMetal Bracket Mounts to scraper bracket. Standard liquid tail KTN210027 $29.50Great Plains All 00HD Series Row Units Metal Bracket Mounts to scraper bracket. Standard liquid tail KTN210028 $29.50John Deere1560, 1860 1590, 1890 1690, 1990Metal Bracket Mounts to back of t-handle slotted bracket. Standard liquid tail KTN210012 $35.50Metal BracketJohn Deere 450, 455 1520 Metal Bracket Mounts to seed disk scraper. Standard liquid tail KTN210014 $29.50John Deere 750, 1850 Metal Bracket Mounts to seed disk scraper. Standard liquid tail KTN210016 $35.50Krause Most Metal Bracket Mounts to fertilizer opener. Will not fit 5200 and 5400. Standard liquid tail KTN210018 $30.50Marliss Most Metal Bracket Mounts to seed disk opener. Will not fit 2038. Standard liquid tail KTN210020 $30.50Tye All Metal Bracket Mounts to seed disk scraper. Standard liquid tail KTN210023 $30.50Sunflower 9411, 9412, 9421 Metal Bracket Mounts to back of disk opener casting. Modified dry tail KTN210024 $30.50VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 3737Mojo WireMojo Wires fit most planter Keetons. Will not fit low profile tails or drill Keetons.Mur-lok® Fitting Installation Instructionsfeatures include:• Leak Resistant Dual EPDM O-Rings• Chemical Resistant Polypropylene• NSF Standard 58 Certified• 150 psi @ 70ºF• 60 psi @ 140ºF• For Use with Plastic or Soft Metal TubingMur-loK fiTTingsWhy the Mojo Wire?• 3x to 5x pressure of standard Keeton• Ensures fast, uniform germination• Large payback potential, especially in resilient no-till soils• Quick fix for limp, aging Keeton firmersIn North America, most seeders were never really engineered to plant no-till. For instance, the original press wheels on all planters (and so-called “no-till” drills) were designed for the loose, dry conditions found in tilled seedbeds—they were intended to pack the soil from the surface all the way down to the seed, which was easily done in loose tilled soil. Substantial packing was desirable to help the seed draw moisture from beneath, since the soil near the surface had dried with tillage.In no-till, this concept is terribly flawed. No-till soils are resilient (structured) and don’t readily fall back into the furrow. Plus, an enormous amount of pressure must be applied at the surface to do any seed firming at all down in the bottom of the furrow. In no-till, to get even 5 lbs of pressure at seed depth might require 50 to 150 lbs. applied to the press wheel at the surface, and even then it might not be enough and certainly won’t be consistent at seed depth. You are severely packing the sidewalls and soil over the seed (thru which it must push) in attempting to do something down at the bottom of the furrow. Why not just apply a precise amount of pressure exactly where it’s needed—at the bottom of the furrow?In the early ’90s, this is exactly what the introduction of the Keeton seed firmer was supposed to do. However, the Keetons applied only a few ounces to (at most) ~ 1.5 lbs of pressure on the business end of the Keeton. In many cases, that wasn’t enough force. The situation is made worse by the fact that the nylon material used to mold the Keetons loses its integrity (springiness) after awhile (apparently due to absorbing moisture, ‘cold flowing,’ and UV degradation).To remedy the situation, Exapta introduced the Mojo Wire stiffener in 2006, which supplies up to 5 times the pressure to the standard Keeton. In our testing and our customers’ experience, we’ve simply been amazed at how much better the germination consistency was—both in terms of higher percentages of seeds emerging, and in uniformity of timing of emergence.Another noticeable improvement was in the self-cleaning action of the Keeton against the furrow sidewalls. Adding the Mojo Wire has improved this self-cleaning action, at least in low-disturbance no-till.NOTE: One drawback to increasing the pressure on the Keeton is that the tail wears more quickly. If you put lots of acres on your planter in a season, expect to completely wear out a set of Keetons with the Mojo Wire installed. Mojo Wire KitsProduct ID Product Description PriceKTN400100 Mojo Wire, for Keeton seed tube mount $23.00KTN400200 Mojo Wire, for standard Keeton bracket mount $20.00KTN400211 Mojo Wire, for Wave Vision Keeton bracket mount $20.00KTN400600 Mojo Wire, for Keeton drill firmer $8.00Mojo Wire Replacement PartsProduct ID Product Description PriceKTN400900 Plastic mounting block for tubing $5.50KTN400901 Hose clamp $1.25KTN400902 Wire for KTN400100 $4.50KTN400903 Steel mounting block for KTN400100 $5.50KTN400904 Wire for KTN400200 $7.00KTN400905 Wire for KTN400211 $7.00HDW210246 Screw, 1/4-10 x 1-3/4, hex head slotted for KTN400100 $1.631. MAKE A CLEAN TUBE CUTCut the tube squarely and if using plastic tubing, ensure that the cut has not made the tube out of round. Also ensure that the tube has a smooth outside diameter without any burrs or score marks prior to inserting it into the fitting.2. INSERT TUBE INTO FITTINGPush the tubing through the collet and dual o-rings until it bottoms out against the tube stop. The collet holds the tube in place and the dual o-rings provide a leak resistant seal.3. TEST AND INSPECTPush and pull the tubing toward and away from the fitting to ensure that it has been installed properly. Test & inspect for any leaks.Product ID Product Description PriceKTN500000 Mur-Lok union, 1/4” to 1/4” $1.95KTN500001 Mur-Lok union, 3/8” to 1/4” $2.66KTN500002 Mur-Lok union, 3/8” to 3/8” $2.64KTN500003 Mur-Lok union, 1/2” to 3/8” $3.58KTN500004 Mur-Lok union, 1/2” to 1/2” $3.04KTN500005 Mur-Lok union, 5/16” to 1/4” $2.20KTN500006 Mur-Lok union, 5/16” to 5/16” $2.14KTN500100 Mur-Lok divider, 1/4” to 1/4” $3.07KTN500101 Mur-Lok divider, 3/8” to 3/8” $3.54800.368.7773CALL TOLL-FREE TO ORDER TODAY.38Made ofChrome-AlloyFor Longer Life.The Acra-Plant® insert creates a uniform V-Slice below the sidewall compaction of discs. The formed V-Shape contacts seed firmly on both sides . . . soil springs back . . . catching and squeezes seed . . . locking it in place within the row as metered.The Acra-Plant® insert enhances the planting performance of your planter. TheV-slice creates a uniform firm & moist seedbed. It allows even spacing and uniform depth of each seed in the row.Faster and more even germination of seed. Faster and more uniform emergence of plants. Even competition between plants in row. Increased yield potential from each plant and better overall yeilds.aCra-PlanTV-sliCe inserTsAcra-Plant specializes in No-Till & Min-Till planting and drilling equipment, fertilizer application tools, and chisel plow tools. The current awareness and emphasis on No-Till and Min-Till agricultural practices emphasizes our full line of Acra-Plant Precision Planting/Seeding Solutions.The Six Most Important Characteristics of A Proper Crop Stand:1. Fast germination2. Uniform and fast emergence3. Early root development4. Uniform plant spacing in the row5. Proper plant population6. Correct leaf positionnote: not recommended for use in rocky conditions.Acra-Plant Replacement V-Slice InsertsProduct ID Description PriceAPL410000V-Slice insert, for APL100040 tandem blade opener (long piece)$51.95APL410100V-Slice insert, for APL009040, APL100040 tandem blade opener (short piece)$44.95APL410601 V-Slice insert, for APL009840 $48.95APL410602 V-Slice insert, for APL034550 $48.95Acra-Plant V-Slice InsertsProduct ID Description PriceAPL001685 V-Slice insert, White 6000-8000 series $25.95APL001785V-Slice insert, Kinze 2000 series, John Deere 7000-7300, 1700 series$27.95APL001885V-Slice insert, Kinze 3000 series, includes special socket-head cap screws with Loctite$39.95APL001985 V-Slice insert, John Deere, XP row unit series $42.95APL001772Tube extension bracket, required when a straight, instead of curved, seed tube is used$7.95Acra-Plant V-Slice OpenersProduct ID Description PriceAPL009040 V-9 opener, IHC 400-500 series with offset discs $177.95APL009840 V-98 opener, Case-IH 800, 900, 1200 series $138.95APL034550 V-51 opener, White 5100, 5700 series $145.95VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 3939Convert your standard planter to a No-Till machine without increasing row unit down-pressure and without the high cost of residue management systems or coultersNo-Till Now with Acra-PlantNotched Disc OpenersAcra-Plant® Notched Disc Openers• Strong disc design is 50% thicker chrome-moly alloy that sheds wet soil better and keeps discs clear• Stronger, heavy duty bearing and flange design• Modified gothic arch bearing structure extends wear and runs straight and true• Molded rubber hubcap stays in place• Acra-Plant notched discs and inserts turn your present planter into the ultimate narrow profile no-till system insert• 11 & 15 notch discs aggressively slice through the toughest residue• Package requires the Acra-Plant V-slice insertSpecial Features of Acra-Plant No-Till/Min-Till Planter Notched Disc Opener Kit1. The two disc blades in the set each have a different number of notches, 15 notches on one blade and 11 notches on the other. This assures that the blades will self-turn instead of skidding over old crop residue, and the blade notches overlap as they work together to actually CUT the trash ahead of the V-slice opener system. This feature converts the planter openers to a true NO-TILL operation that is equally suited for Minimum Till and Conservation Tillage plans.2. The disc blades themselves are up to 50% thicker than the smooth OEM blades that they replace. Combine that with the Chrome-Boron-Moly alloy, and you get a strength and durability unmatched by other replacement blades. Cutting through heavy residue and trash acre after acre requires tough, durable, and thick opener blades. Acra-Plant answers the call to duty with these blades.3. Note that the opener discs feature a flat ground edge, rather than the cheaper alternative of hollow grinding the edge. Flat grinding a true bevel allows the blades to self sharpen as they wear, rather than immediately going dull.4. The bearings used in Acra-Plant opener discs are of the true Gothic Arch design. Gothic Arch 4-race bearings cost more, but they allow the bearings to transmit radial load, axial thrust & overturning moments to a much greater extent than the cheaper twin-race ball bearings.5. The alloy casting V-slice opener that actually produces the uniform seed trench is made of 25% chrome for longer life and durability.aCra-PlanT noTCHed disC oPenersAcra-Plant Notched Disc OpenersJohn Deere 7000-7300, 1700 Series, Kinze and White 6000-8000 SeriesProduct ID Description PriceAPL101711 Acra-Plant notched disc opener, 15”-11 notch $93.95APL101715 Acra-Plant notched disc opener, 15”-15 notch $93.95APL001760 Bearing & flange repair kit, notched disc openers $49.95Note: A firming point must be installed when using notched disc openers.Case-IH 400, 500, 800, 900, 1200 Series and White 5100, 5700 SeriesProduct ID Description PriceAPL109811 Acra-Plant notched disc opener, 14”-11 notch $93.95APL109815 Acra-Plant notched disc opener, 14”-15 notch $93.95APL001760 Bearing & flange repair kit, notched disc openers $49.95Note: A firming point must be installed when using notched disc openers.Acra-Plant Notched Marker DiscsProduct ID Description PriceAPL430000Acra-Plant 13” notched marker disc for John Deere 7000-7300, 1700 series, Kinze and Case-IH 800, 900 series (additional mounting bracket is required). Note: For John Deere prior to 1974, must purchase AA27924 from a John Deere dealer. $111.95APL430001 Marker bracket, Case-IH with folding markers and round shaft $39.95APL430002 Marker bracket, Case-IH with non-folding markers and flat plate $44.95800.368.7773CALL TOLL-FREE TO ORDER TODAY.40Made Of Chrome-Alloy For Longer LifeCAUTION: S.I. Distributing Inc. warrants these products to be free of defects in material and workmanship. Liability under warranty shall extend to replacement or credit of product found to be defective on examination by S.I. Distributing Inc. This warranty does not extend to misuse or damage by accident or negligence. Chrome castings are not guaranteed for use in rocky, stony or frozen ground. S.I. Distributing Inc. will not honor any claim for warranty on chrome castings that have been altered or welded on in any way. S.I. Distributing Inc. will not recognize any claims for consequential or incidental damages.APL700041 APL700042 APL700044APL801300APL801400APL801600aCra-PlanTferTilizer KniVesaCra-PlanT blu-jeT ParTs• Acra-Plant replaceable point fertilizer knives outlast “throwaway” knives 3–5 times - reducing downtime and saving money in the long run• Chrome Carbide Points scour quickly to a high polish, slipping through the soil and pulling easier than “throwaway” knives — you’ll save more fertilizer with the unique self-sealing design• Acra-Tuff Chrome Carbide alloy point continues to perform like new throughout its life with no degradation of performance after just a few hundred acres• Acra knives are designed for minimum surface disturbance — perfect for your No-Till cropping plan• With a choice of three Acra-Tuff Chrome Carbide replacement points and many NH3 and liquid tube options, you can tailor your fertilizer rig to match your conditions and switch very easily if your crop rotation or nutrient plan changesAPL700010• Quick-Change• Side MountGas/liquid expel point is low, forward, andprotected by the Chrome Carbide point tominimize freeze-up, plugging and tubewear, even in dual applicationThree styles of Chrome Carbide replacement points available to match your ground conditionsChange worn inserts in seconds with spring pinHigh-strength steel shank is punched to accept mostside-mount applicators3/8? and 1/2? NH3 or liquidtubes available in just aboutany combinationAPL700043 APL701600Product ID Description PriceAPL801300 V-crown ripper “Spring” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Narrow point is 2” wide and 14” long for deep tillage. $124.95APL801400 V-crown ripper “Fall” point, Blu-Jet Sub-Tiller II with 1-1/2” shank. Wider point is 2-7/8” wide and 15-1/2” long for deeper tillage and more shattering action. $157.95APL801600 Shin guard, Blu-Jet Sub-Tiller II with 1-1/2” shank. $157.95Acra-Plant Fertilizer KnivesProduct ID Description PriceAPL700010Shank with NH3 tube (.408 OD). Universal hole and slot to fit most applicators. Remove spirol pin for quick point replacement. Dead air space insulates point to prevent freeze-ups. $45.95APL700041 Fertilizer point, standard wing. The most widely used and effective in a wide variety of soil types. Includes 3/8” x 1-3/8” spiral pin $28.95APL700042 Fertilizer point, super wing. Ideal for use in sandy soils that need to be loosened or fractured to allow maximum penetration of fertilizer. Includes 3/8” x 1-3/8” spiral pin $36.95APL700142 Strip till point, has a flat wedge point on bottom like a strip till knife $34.95APL700043Fertilizer point, heavy duty super wing. Ideal for use in sandy soils that need to be loosened or fractured to allow maximum penetration of fertilizer. Includes 3/8” x 1-3/8” spiral pin$33.95APL700044Fertilizer point, super wing with closer. Designed for sandy or clay soils that are both tough to open and tough to close. Incorporates a “Super Wing” as well as “Closing Wing” to seal the fertilizer at the desired location. Includes 3/8” x 1-3/8” spiral pin$47.95APL701600 ST-16 heavy duty strip till point. Designed for 8-12” deep application and subsoil shattering on strip till rigs. Protected liquid tube for delivery of anhydrous or liquid. $76.95Acra-Plant Fertilizer TubesProduct ID Description PriceAPL700020 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled $10.70APL700021 Replacement tube, 3/8” liquid (.408” outside diameter) open end $10.15APL700022 Replacement tube, 1/2” liquid (.569” outside diameter) open end $12.60APL700023 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled, with clip rings for 1/2” plastic hose for dual applications. $24.60APL700025 Replacement tube, 1/2” anhydrous (.569” outside diameter) crimped and drilled $13.35VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 41Features & Benefits:• Relieves soil compaction zone for yield improvement• Improves soil tilth to increase nutrient availability and root uptake• Produces a subsoil profile that assures improved root penetration• Assures moisture retention in the driest conditions• Provides fracture and lift with little surface disruption or “slabbing”• Allows flexibility in running depth• Scours up, pulls easy and flows soil around the shank to reduce wear• Provides long wear life in the widest variety of soil conditionsCRP points are available with wings and without wings for inner row and spring fieldwork. The unique design allows for the use of solid 25% chrome carbide in all the wear surfaces with mounting boots designed specifically for the most popular makes and models of disc rippers and subsoilers.7” 10”2-1/2”aCra-PlanTConserVaTion riPPer PoinTsConservation Points are now available in 2-1/2” (no wing), 7” winged, & 10” winged for just about any applicationThe CRP line of points is the newest evolution of Subsoiler & Ripper points designed by combining Acra-Plant technology with the years of experience ShieldAg has in supplying long-lasting high-performance Chrome Carbide Ripper Points.aCra-PlanT QuiCK-CHangeferTilizer KniVesFor Chisel Plow ApplicatorsFeatures & Benefits• Long-lasting Alloy replaceable points outwear ?throwaway? chisel knives 3–5 times• Continues to perform like new throughout its life, no degradation of performance after just a few hundred acres• Convert from fertilizer placement to standard chisel in just a few minutes by replacing the APL708041 fertilizer point with the APL705141 chisel plow point• Tube options available for nearly any NH3 or liquid applicationPlease call with make and model of ripper for pricing.Acra-Plant Chisel Plow ApplicatorsKey Product ID Description Price1 APL708041 Chisel plow fertilizer point. Includes APL500657, 1/2” x 1-1/4” spiral pin $21.952 APL705141 Chisel plow tillage point. Reversible. Includes APL500657, 1/2” x 1-1/4” spiral pin. $27.953 APL705011 Chisel plow shank $26.954 APL708003 Adjusting wedge to change shank angle $9.255 APL705029 Tube mounting kit $13.956 APL705020 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled $10.906 APL705021 Replacement tube, 3/8” liquid (.408” outside diameter) open end $10.606 APL705022 Replacement tube, 1/2” liquid (.569” outside diameter) open end $13.006 APL705023 Replacement tube, 3/8” anhydrous (.408” outside diameter) crimped and drilled, with clip rings for 1/2” plastic hose for dual applications. $26.656 APL705024 Replacement tube, 1/2” anhydrous (.569” outside diameter) crimped and drilled $13.75800.368.7773CALL TOLL-FREE TO ORDER TODAY.42• Quick repair• Saves time and money• Easy installation, no tools required• Cost effective vs. OEM replacements• PatentedLong Lasting Self-Lubricating Plastic Chain Tightner and/or Wear Block with 9/16” Hole• Decreases wood block replacement• Reduces chain wear and friction• Saves labor, money and downtime• Increases chain life and keeps chain tight• Lasts 4 To 5 times longer than wood blocks• Replaces any idler on chain driven equipmentThe Plastic Wear Block has characteristics that are very high in lubrication which reduces chain wear. After several years of continuous testing, this type of plastic has shown an outstanding capability to replace chain sprocket idlers on all types of machinery. As well as being used on the earlier models of Gleaner combines, there has been excellent success with them on the more recent models, where idler bearing pulleys and sprockets were being used. This Plastic Wear Block can definitely reduce your operating costs since the Plastic Wear Block is priced considerably lower than the current idler bearing.Product ID Description PricePDM020000 Quick Finger, 10-Pack $15.50 Note: Will only properly fit Level II pipe reels with 6” tine spacing. Quick Finger will fit ML reels with 4.5” tine spacing but it will be 3/8” shorter than the original tine. Quick Finger Installation Repaired Reel Fingerin a Snap+ =Product ID Description PriceCBM500000 Plastic wear block $6.95Broken Reel FingerThe Quick Finger will Fit the Following Pipe Reels:AGCO 300, 400, 500, 700, 800 series headsCase-IH 1010, 1020, 2020, series headsCaterpillar 1998 and laterJohn Deere 900, 600 series headsMassey Ferguson 9700, 9750, 9800, 9850 series headsNew Holland 971, 973, 71C, 73C, 72C, 74C series headsQuiCK fingerPlasTiC Wear bloCKsVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 43The Paddle is a proven tine replacement system that offers true high performance at harvest time. When crop conditions make harvesting difficult and inefficient, the Paddle is thecost-effective alternative to standard tines.The Paddle’s six-inch width lift and feeds crop that standard tines miss. The Paddle provides full crop contact, even with short crop, and delivers positive and even feeding into the header. The Paddle helps reduce or eliminate the need for an expensive air reel.The Paddle is available for wood bat, tear-drop, and tube-type reels. HCC’s patented tine mounting system makes installation fast and easy. Paddles are packaged ten to a box and include mounting hardware with complete installation instructions.The “Paddle” offers several advantages over standard tines including:• Increased Harvest• Improved Feeding• Cleaner Cutterbar• Faster HarvestingThe “Paddle” is packaged ten to a box and includes “Paddles”, screws and complete installation instructions.Original Tine Spacing Reel Width18’ 20’ 25’ 30’ 36’4.5” 40 40 50 60 N/A6.0” 30 40 40 50 60Reel Tine Identification(1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit into the notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989.(2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2.5” (64 mm) above the edge. The Love Reel was not manufactured by HCC Inc.(3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart. The tines have a round nub that fits into a round hole in the tube. Supplied from 1989-1999.(4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes spaced 6.0” (152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube. Standard since 1999/2000.(5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” (114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine.HCC Paddle TinesMaximized PickupHigh Performance Tines for Short or Sparse CropsThe Paddle is designed to provide a complete sweep of the header with each rotation. By limiting the number of Paddles used, you save installation time & money.HCC Paddle TinesProduct ID Description PriceHCC783950 Paddle Tines, 10-pack, Polytine reel (1) $52.50HCC783845 Paddle Tines, 10-pack, ML reel (3) $52.50HCC783846 Paddle Tines, 10-pack, Level II reel (4) $52.50HCC783949 Paddle Tines, 10-pack, wood bat reel (5) $55.70800.368.7773CALL TOLL-FREE TO ORDER TODAY.44HCC OEM Replacement Reel TinesProduct ID Description PriceHCC782018 Polytine reel tine, 10-pack, with screws (1)$22.94HCC782123 Polytine reel tine, 500-pack, with screws (1)$779.10HCC782094 Love reel tine, 10-pack, with screws (2)$28.98HCC782124 Love reel tine, 275-pack, with screws (2)$673.58HCC782226 ML reel tine, full bat, 10-pack, with screws (3)$28.98HCC782551 ML reel tine, full bat, 180-pack, with screws (3)$441.00HCC224017 ML reel tine, right hand bat, one (3) $3.13HCC782223 ML reel tine, right hand bat, 6-pack, with screws (3)$17.06HCC224018 ML reel tine, left hand bat, one (3) $3.13HCC782224 ML reel tine, left hand bat, 6-pack, with screws (3)$17.06HCC224019 ML reel tine, no bat, one (3) $3.71HCC782225 ML reel tine, no bat, 6-pack, with screws (3)$20.79HCC rePlaCeMenT reel TinesReel Tine Identification(1) Polytine Reels have a teardrop shaped metal bat with notches spaced 4.5” (114 mm) apart. The tines fit into the notches and are fastened to the back of the metal bat approximately 3” (76 mm) above the notch. Supplied from 1984-1989.(2) Love Reels have a sheet metal bat and the tine fastens over the bottom edge. There is a projection that fits into a hole on the front of the bat approximately 2.5” (64 mm) above the edge. The Love Reel was not manufactured by HCC Inc.(3) ML Reels have a 1.375” (35 mm) tube with 0.4” (10 mm) round holes spaced approximately 4.5” (114 mm) apart. The tines have a round nub that fits into a round hole in the tube. Supplied from 1989-1999.(4) Level II Reels have a 1.375” (35 mm) tube with 0.5” (12.7 mm) hex holes spaced 6.0” (152 mm) apart. The tines have a hex nub that fits into a hex hole in the tube. Standard since 1999/2000.(5) Wood Bat Reels have a wood bat with steel tines spaced approximately 4.5” (114 mm) apart. The tines are pressed into the bat and there is a metal clip riveted to the bat to provide support to the tine.Product ID Description PriceHCC783707 Level II reel tine, full bat, 10-pack, with screws (4)$35.70HCC783597 Level II reel tine, full bat, 130-pack, with screws (4)$405.30HCC224048 Level II reel tine, left hand bat, one (4) $3.52HCC783708 Level II reel tine, left hand bat, 10-pack, with screws (4)$32.55HCC224049 Level II reel tine, right hand bat, one (4) $3.52HCC783709 Level II reel tine, right hand bat, 10-pack, with screws (4)$32.55HCC224050 Level II reel tine, no bat, one (4) $3.52HCC783710 Level II reel tine, no bat, 10-pack, with screws (4)$32.55HCC480056 Wood bat steel tine, one (5) $2.40HCC480057 Clip, for wood bat steel tine, one (5) $0.28THe sure sToPAPPLICATIONS:• Trailer Placement under Bins• Trailer Placement over Pit Screws• Alignment with Transport Augers• Alignment on Truck Scales• Permanent Mount or Portable with Optional Tri-Pod (not included)FEATURES:• 90 Decibel Alarm & LED Light Signals Your Exact Stopping Position• Operates on 110V, 8-Foot Cord Included• Weather Resistant• Proven Technology for 10+ Years• Accurate up to 13 Feet• Includes 4 Pieces of Reflective TapeProduct ID Description PriceWPS100000 Sure Stop $595.00 WPS200000 Reflective Tape, 8” piece $1.50Tri-PodNot IncludedVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 45Tested and Refined Over Several Harvest Seasonsby High-Hour Combine UsersThe Gateway, HCC’s NEW sieve and chaffer system, is significantly lighter than standard sieves and chaffers found on current combines. The patented design utilizes aluminum and plastic construction for lower frame weight. That reduces wear and tear on cleaning shoe bushings and bearings, extends their life, and reduces combine downtime.Unlike conventional all-steel sieves and chaffers that are difficult or impossible to repair, the modular construction of Gateway Sieves & Chaffers permits easy and cost-effective repair. The added lubricity of the plastic slats also prevents crop build up on the slats, especially when harvesting in near-freezing conditions.Side-by-side field comparisons demonstrate that Gateway Sieves & Chaffers clean grain as well or better than current systems. Gateway Sieves excel in cleaning lighter crops (like alfalfa seed) and heavy crops (like high yield / high moisture corn).Gateway Sieves & Chaffers are manufactured by HCC, Inc., the same company that makes virtually all of the original equipment sieves and chaffers.As a result, fit and function is guaranteed to meet or exceed original equipment standards. Gateway™ works with manual or remote adjustment systems.Handle makes it easy to adjust slats.Modular construction permits easy and cost-effective repair.Two slat design options for a variety of crops. The “LT” (top 45mm) and “ST” (bottom 33mm) are available.Gateway™ Sieves & Chaffers offer a number of advantages over standard steel sieves and chaffers including:• Greater slat lubricity for improved crop flow• Improved grain cleaning • Reduces combine down time• Less chaff build-up• Rust proof, resists freezing• Repairable with reduced wear and tear• Lightweight - up to 50% lighterMade ByHCC gaTeWay sieVes & CHaffersWhy spacing options?Narrow Spacing (33mm): Used for small grains: wheat, alfalfa, and cereal grains; 33ST top 33ST bottom.Wide Spacing (45mm): Used for large crops: corn and soybeans; provides faster operation through high-yielding crop; 45LT top 33ST bottom.Slat connectors are durable and provide reliable adjustment consistency. All components are replaceable for quick and economic repair.Slats are infinitely adjustable to match your specific crop needs. Slat opening is uniform and repeatable. The number of adjustment controls will match most units.Currently available for most combines. Please check our websitewww.sidist.com or call for current pricing on specific makes and models.800.368.7773CALL TOLL-FREE TO ORDER TODAY.46HCC orbiT TraC ii reel KiTTrue High PerformanceThe revolutionary, patent-pending design of the Orbit Trac II is tailored to today’s high-performance headers and brings the reel tines right up to the auger before exiting the crop. The old-fashioned reel is replaced with a double-track system. The unique shape of the Orbit Trac II allows the reel tines to break their circular path and swing directly past the auger. Crop flow is positive. Build-up and slugging is reduced. Eliminating the Reel - Auger GapGo with the flow. The Orbit Trac II™ allows you to harvest more crop in less time:• Continuous crop flow – less slugging• Positively places crop into the auger• Adjusts reel path to specific header depth and auger size• Longer sweep – more control of crop entry to header• Six years of field-testing• Retrofits all HCC ML and Level II reels built since 1990• Lower Half of Track is Now Made of SteelThe Orbit Trac II is a proven solution that has been field tested by large operators and custom cutters for six years. The Orbit Trac II has been designed as a retrofit for all HCC tube-type reels. Installation is easy and can be accomplished on the farm in a few hours.Product ID Product Description PriceAGCO 400-8000 SeriesHCC031371 AGCO, 400, 500, 800, 8000 series, 25-35’ $2,669.01HCC031372 AGCO, 400, 500, 800, 8000 series, 22’ & shorter $1,401.35AGCO 8200HCC031373 AGCO, 8200 series, 25-35’ $2,669.01HCC031396 AGCO, 8200 series, 20’ & shorter $1,401.35Case-IH 1010 & 1020 (Verify single eccentric or double eccentric reel.)HCC031382 Case-IH, 1994 & prior, 22’ & longer 1010 headers (-JJC0200000) & 1020 headers (-JJC0215000) $2,669.01HCC031383 Case-IH, 1994 & prior, 20’ & shorter 1010 headers (-JJC0200000) & 1020 headers (-JJC0215000) $1,401.35HCC031380 Case-IH, 1995-1997, 22’ & longer 1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000) $2,669.01HCC031381 Case-IH, 1995-1997, 20’ & shorter 1010 headers (JJC0200001-JJC0300000) & 1020 headers (JJC0215001-JJC0315000) $1,401.35HCC031369 Case-IH, 1998 & newer, 22’ & longer 1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-) $2,669.01HCC031370 Case-IH, 1998 & newer, 20’ & shorter 1010 headers (JJC0300001- & CBJ023001-) & 1020 headers (JJC0315001- & CBJ023003-) $1,401.35Case-IH 2010 & 2020HCC031376 Case-IH, 2010, 2020, 22-35’ $2,669.01HCC031377 Case-IH, 2010, 2020, 20’ & shorter $1,401.35Case-IH 3020HCC031532 Case-IH, 3020, 25-35’ $2,669.01HCC031533 Case-IH, 3020, 20’ $1,401.35Honey BeeHCC031385 Honey Bee, double eccentric $2,669.01John Deere 600 Series (Will not fit Flex Draper)HCC031374 John Deere, 600 series, 25’ & longer $2,669.01HCC031375 John Deere, 600 series, 22’ & shorter $1,401.35John Deere 900 SeriesHCC031367 John Deere, 900 series, (serial # 645301-) 25’ & longer $2,669.01HCC031368 John Deere, 900 series, (serial # 645301-) 22’ & shorter $1,401.35Massey FergusonHCC031388 Massey Ferguson, draper, double eccentric $2,669.01HCC031384 Massey Ferguson, 1859, single eccentric $1,401.35HCC031373 Massey Ferguson, 8200 series, 25-35’ $2,669.01HCC031396 Massey Ferguson, 8200 series, 20’ & shorter $1,401.35New HollandHCC031378 New Holland, 970-973, 25’ & longer $2,669.01HCC031379 New Holland, 970-973, 22’ & shorter $1,401.35HCC031376 New Holland 72C, 74C, 22-35’ $2,669.01HCC031377 New Holland 72C, 74C, 20’ & shorter $1,401.35HCC031400 New Holland 73C, 22’ & longer $2,669.01HCC031401 New Holland 73C, 20’ & shorter $1,401.35HCC031532 New Holland 740CF, 22’ & longer $2,669.01HCC031533 New Holland 740CF, 20’ & shorter $1,401.35Orbit Trac II Update KitsHCC031410 Orbit Trac II Update Kit, Double Eccentric (Steel track for bottom half of Orbit Reel) $491.21HCC031411 Orbit Trac II Update Kit, Single Eccentric, LH (Steel track for bottom half of Orbit Reel) $245.60HCC031412 Orbit Trac II Update Kit, Single Eccentric, RH (Steel track for bottom half of Orbit Reel) $245.60Note: The Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 47For Combines and Swathers - Smoother crop flow, Less downtime & superior component strengthHCC Reels are constructed from resilient, durable materials such as 14 gauge HSLA tubing for bat tubes, and patented, tough polymer tines giving the reels greater strength at lower weight. Center tubes on 15 to 30 foot reels are 8-inches in diameter and 10-inches on reels larger than 30 feet. Integral hex drive pins increase pin shear strength by 75%, while heavy, welded 8mm crank arms increase bat tube lateral and torsional strength. HCC Reels feature an innovative tine layout, staggering tines to reduce weight and bat wrapping while creating a more efficient tine path. With fewer parts, stronger components, 35 – 40% greater visibility, and lighter weight, HCC Reels improve performance and reduce downtime.• Lower Weight• Stronger Construction• Increased Visibility• More Effective Crop MovementHCC CoMPleTe orbiT TraC ii reelMade ByAdvance Engineering has allowed a stronger reel with fewer parts. Steel tine reel option also available.Lighter weight reels require less horsepower and lower drive loads.Product ID Product Description Pkg. Price Total PriceAGCO 400-8000 Series25’HCC031392 Orbit II attaching package, AGCO, 25’ & 30’ $4,081.61$6,132.54HCC030561 Reel bundle, Level II, AGCO, CIH, 25’ $2,050.9330’HCC031392 Orbit II attaching package, AGCO, 25’ & 30’ $4,081.61$6,455.62HCC030581 Reel bundle, Level II, AGCO, CIH, 30’ $2,374.01AGCO 820025’HCC031397 Orbit II attaching package, AGCO 8200, 25’ & 30’ $3,976.23$6,027.16HCC030561 Reel bundle, Level II, AGCO, CIH, 25’ $2,050.9330’HCC031397 Orbit II attaching package, AGCO 8200, 25’ & 30’ $3,976.23$6,350.24HCC030581 Reel bundle, Level II, AGCO, CIH, 30’ $2,374.0135’HCC031395 Orbit II attaching package, AGCO 8200, 35’ $4,978.56$8,224.61HCC032082 Reel bundle, Level II, AGCO 8200, 35’ $3,246.05Case-IH 1020 (1)25’HCC031387 Orbit II attaching package, CIH 1020, 25’ & 30’ $4,260.51$6,311.44HCC030561 Reel bundle, Level II, AGCO, CIH, 25’ $2,050.9330’HCC031387 Orbit II attaching package, CIH 1020, 25’ & 30’ $4,260.51$6,634.52HCC030581 Reel bundle, Level II, AGCO, CIH, 30’ $2,374.01Case-IH 202025’HCC031393 Orbit II attaching package, CIH 2020, 25’ & 30’ $4,297.27$6,306.53HCC030560 Reel bundle, Level II, CIH 2020, 25’ $2,009.2630’HCC031393 Orbit II attaching package, CIH 2020, 25’ & 30’ $4,297.27$6,532.45HCC030580 Reel bundle, Level II, CIH, JD, NH, 30’ $2,235.1835’HCC031398 Orbit II attaching package, CIH 2020, 35’ $5,039.83$8,472.01HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18Case-IH 302025’HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79$6,354.82HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.0330’HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79$6,838.20HCC030582 Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’ $2,390.4135’HCC031535 Orbit II attaching package, CIH 3020, NH 740CF, 35’ $5,424.31$8,856.49HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18John Deere 600 Series (Will not fit Flex Draper)25’HCC031389 Orbit II attaching package, JD 600, 25’ & 30’ $4,099.99$6,007.02HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.0330’HCC031389 Orbit II attaching package, JD 600, 25’ & 30’ $4,099.99$6,490.40HCC030582 Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’ $2,390.4135’HCC031402 Orbit II attaching package, JD 600, 35’ $5,150.72$8,582.90HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18John Deere 900 Series25’HCC031390 Orbit II attaching package, JD 900, 25’ & 30’ $4,185.76$6,092.79HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.0330’HCC031390 Orbit II attaching package, JD 900, 25’ & 30’ $4,185.76$6,420.94HCC030580 Reel bundle, Level II, CIH, JD, NH, 30’ $2,235.18New Holland 740CF25’HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79$6,354.82HCC030562 Reel bundle, Level II, CIH, JD, NH, 25’ $1,907.0330’HCC031534 Orbit II attaching package, CIH 3020, NH 740CF, 25’ & 30’ $4,447.79$6,838.20HCC030582 Reel bundle, Level II, AGCO, JD, CAT, HB, NH, 30’ $2,390.4135’HCC031535 Orbit II attaching package, CIH 3020, NH 740CF, 35’ $5,424.31$8,856.49HCC032023 Reel bundle, Level II, CIH, JD, NH, 35’ $3,432.18(1) For Case-IH headers 1998 and newer with serial number #JJC0315001 & CBJ023003 and up.Please call for complete Reel replacement options for other combines and swathers not listed above. Note: The Orbit Trac II Reel kit has the bottom half of the track made out of steel. The Orbit Trac II Reel kit is designed only for HCC Inc. Level II and ML tube-type reels. They have been original equipment on most headers since 1990.800.368.7773CALL TOLL-FREE TO ORDER TODAY.48Completely Fill Your Grain Bin ExtensionThe Bubble-Up Auger is a good companion product for any make of combine hopper extensions. It will take the load and strain off of the combine’s hopper fill system. The Bubble-Up Auger enables the user to put the “PEAK OF THE HEAP” where it’s wanted and provides more complete filling of the combine’s hopper extension.The Bubble-Up Auger uses 8” diameter by 46” tall open flight auger that utilizes “Super Edge” helicoid for longer wear and a heavy duty hydraulic motor for years of trouble free power. The Bubble-Up Auger quickly folds down into the combine’s hopper for storage.The Bubble-Up Auger requires approximately 10 GPM of oil at 1,500 PSI to operate. It will run approximately 300 RPM. Because it runs 100% full in operation, it can handle large quantities of grain per hour, posing no problems with either 8 or 12 row corn heads.The Bubble-Up Auger includes everything needed to install it in the combine hopper, except hoses, which are best measured and made up after installation of the Bubble-Up Auger is completed.Normally, the Bubble-Up Auger connects directly into the reel drive outlets for corn head work or in series with the reel drive motor for flex head work. When operated in this fashion, the Bubble-Up Auger will run full speed for corn; but markedly slower when doing flex head work. This happens because when the operator sets the speed of the reel for his harvest conditions, the Bubble-Up Auger will receive less oil, resulting in a slower speed. Generally, because the bushels of crop that need to be handled is less with flex head work, having the Bubble-Up Auger run slower is usually not a problem, but something to be aware of.Under normal conditions it is NOT necessary to purchase the optional hydraulic kit since the Bubble-Up Auger connects directly into the reel drive outlets. The only exception is when harvesting rice it is recommended to purchase the hydraulic kit.If it is desired that the Bubble-Up Auger run at full speed in all harvest applications, then it needs to be plumbed directly into the combine’s reel drive circuit. Various kits are available that include all the fittings and valves required.• Reduces grain damage• Reduces wear & load on combine bin fill system• Utilizes “super edge” helicoid for longer wear• Large trouble free orbit motor for high torque• Mounting brackets attach quickly & easily• Installs in less than one hour• Quickly folds down lower than the cab• Includes a one year warrantyburVee bubble-uP augerThe Bubble-Up Auger Fits All Popular Makes - Regardless of Their Bin Fill System.Mounting BracketsAttach QuicklyReduces Grain DamageRelieves Wear & LoadPivot Plate Mount for Ease of AdjustmentQuickly Folds LowerThan Your CabTHEORIGINALBurvee Bubble-Up AugerProduct ID Description PriceBRV500100 Bubble-Up Auger $895.00Optional Hydraulic KitsProduct ID Description PriceBRV500200 Hydraulic kit for John Deere 20 series $150.00BRV500300 Hydraulic kit for John Deere 9000 series $200.00BRV500400 Hydraulic kit for IH/Case-IH, before mid-1995 (1400, 1600) $150.00BRV500500 Hydraulic kit for Case-IH, mid 1995-2000 $200.00BRV500600 Hydraulic kit for Case-IH, 2001-current $200.00BRV500700 Hydraulic kit for New Holland, TR96, TR97, TR98 $200.00BRV500900 Hydraulic kit for other makes (specify make, model and year) $200.00Allows Bubble-Up Auger to operate at full speed when harvesting small grain.VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 49HCC fliP reel KiTThe Flip Reel Kit is designed to eliminate wrapping around bat tubes and is particularly effective in canola and other tall, stringy crops.Installation is easy and can be done on equipment you already own. Designed as a retro-fit for all HCC tube-type reels built since 1990. ML 4-1/2” tine spacing or Level II 6” tine spacings are designed to work with the Flip Reel Kit. You can install it yourself in just a few hours using the Installation Instruction Manual.Eliminate Crop Wrapping Around Bat TubesCalMar auger sPouTUniversal Flow Control. Control the FlowWith a Calmar Auger Spout, you can efficiently and safely direct the flow of grains and oilseeds to all areas of your truck box or grain cart without splash, spillage, and wind loss• Eliminates crop wrapping around bat tubes• Designed to fit HCC tube type reels built since 1990Flip Reel Standard ReelOEM on left & Calmar Auger Spout on right.• Easy Installation• Serves as an Extension to your auger for easier unloading• Grain flow is concentrated but not restricted• Built in pressure release• Fits 12” - 17” augersProduct ID Vendor ID Description PriceCIL014000 FC-1Calmar Auger Spout, Standard Only fits bottom discharge augers 14” and under. Will not work on end discharge augers. Includes extra extensions to be used at the user’s discretion. Most economical model, but does not feature pressure release safety door. $338.00CIL014010 FC4-U08Calmar Auger Spout, Deluxe, 14” Fits bottom discharge and end discharge augers 14” and under. Features a pressure release safety door which will open should the bottom of the Auger Spout becomes plugged or blocked. Includes extra extensions to be used at the users discretion. Note: Not recommended for 2009 and newer Case- IH and New Holland combine models; use FC4-U09$549.00CIL017000 FC4-U09Calmar Auger Spout, Deluxe, 14-17” Fits bottom discharge and end discharge augers from 14” to 17”. Features a pressure release safety door which will open should the bottom of the Auger Spout becomes plugged or blocked. Includes extra extensions to be used at the user’s discretion.$799.00HCC Flip Reel KitProduct ID Product Description PriceAGCOHCC031515 AGCO, 400, 500, 800, 8000 series, double eccentric $1,880.34HCC031520 AGCO, 400, 500, 800, 8000 series, single eccentric $1,021.49HCC031510 AGCO, 8200, 9250 series, double eccentric $2,044.09HCC031521 AGCO, 8200, 9250 series, single eccentric $1,102.81HCC031511 AGCO, 5100, 5200 draper, double eccentric $1,931.58HCC031522 AGCO 5100, 5200 draper, single eccentric $1,047.11Case-IH HCC031516 Case-IH, 1010, 1020, 3020, double eccentric $1,900.39HCC031520 Case-IH, 1010, 1020, 3020 single eccentric $1,021.49HCC031517 Case-IH, 2010, 2020, double eccentric $1,900.39HCC031523 Case-IH, 2010, 2020, single eccentric $1,040.42Honey BeeHCC031357 Honey Bee, clamp mounted, double eccentric $2,071.94HCC031513 Honey Bee, bracket mounted, double eccentric $2,091.99John Deere HCC031518 John Deere, 600 flex series, 900 draper, double eccentric $1,988.39HCC031524 John Deere, 600 flex series, single eccentric $1,071.61HCC031519 John Deere, 900 series, double eccentric $2,443.99HCC031525 John Deere, 900 series, single eccentric $1,278.81HCC031365John Deere, flex draper; 625FD, 630FD, 635FD, double eccentric$2,029.20HCC031351 John Deere, flex draper; 640FD, double eccentric $2,021.15New HollandHCC031515 New Holland, 971, 973, double eccentric $1,880.34HCC031520 New Holland, 971, 973, single eccentric $1,021.49HCC031517 New Holland 72C, 74C, double eccentric $1,900.39HCC031523 New Holland 72C, 74C, single eccentric $1,040.42HCC031515 New Holland 73C, double eccentric $1,880.34HCC031520 New Holland 73C, single eccentric $1,021.49HCC031516 New Holland 740 CF, double eccentric $1,900.39HCC031520 New Holland 740 CF, single eccentric $1,021.49800.368.7773CALL TOLL-FREE TO ORDER TODAY.50MagnojeT sPray nozzles• Ceramic spray nozzles at affordable prices.• Highest quality 99% alumina ceramic.• Ceramic nozzles last 5-15 times longer.• All MagnoJet nozzles are pre-orificed. This reduces internal pressure, produces larger droplets and can reduce drift by 50%. • Full line of standard and air inducted spray nozzles; flat fan, twin outlet, super turbo, flood deflector. • All MagnoJet nozzles meet International Standards and use Standard Color Codes. NewProductTHE ADVANTAGES OF CERAMICS FOR AGRICULTURAL SPRAYINGA large percentage of farmers are using GPS guidance systems on their tractors, sprayers and combines. These systems can place seeds, herbicides, insecticides and fertilizer accurately to within fractions of an inch. And yet expensive sprayers are still being equipped with spray nozzles that only last from 200 to 500 acres before they should be replaced with new nozzles. Why not look at spray nozzle capabilities in the same way, only without anywhere near the investment? Simply put, if you can spray 100 acres with stainless steel, then you should be able to spray 500 acres with HD plastic and you should be able to spray 1,600 acres or more with ceramic Just the down time to change the spray nozzles makes MagnoJet ceramic nozzles a great bargain.CERAMIC SPRAY NOzzLES CAN SAVE CHEMICALSChemical costs have gone through the roof, so you must do a good job of applying your chemicals. Spraying expensive farm fungicides and insecticides with inferior spray nozzles, makes no business sense and will produce poor results and poor results can be devastating to your yields. You are using the best chemicals and yet not utilizing the best spray nozzles for the job.ALL MAGNOJET CERAMIC NOzzLES ARE PRE-ORIFICEDPre-orificed nozzles are better because this reduces the pressure inside the nozzle which produces larger droplets that can reduce drift by 50 percent. It also reduces the wear on the spray nozzle tip.reduces drift – longer lastingsave Time not Changing nozzles as ofteneasy removal of Pre-orifice for CleaningBETTER SPRAY PATTERNSAs spray nozzles wear their spray patterns and droplet sizes change and diminish the effectiveness of the spray. High quality MagnoJet ceramic spray nozzles can last 5 to 15 times longer than plastic or stainless nozzles.MagnoJet Spray NozzlesProduct ID Vendor ID Color Price Product ID Vendor ID Color PriceLowered Drift Flat Fan 80° Standard Super Turbo Flat Fan 135° StandardMNJ220110 BD-01 Orange $4.18 MNJ400310 ST-01 Orange $5.88MNJ220115 BD-015 Green $4.18 MNJ400315 ST-015 Green $5.88MNJ220120 BD-02 Yellow $4.18 MNJ400320 ST-02 Yellow $5.88MNJ220130 BD-03 Blue $4.18 MNJ400325 ST-025 Lilac $5.88MNJ220140 BD-04 Red $4.18 MNJ400330 ST-03 Blue $5.88MNJ220150 BD-05 Brown $4.18 MNJ400340 ST-04 Red $5.88Also available in 110° nozzles MNJ400350 ST-05 Brown $5.88Anti-Drift Flat Fan 80° Air Inducted MNJ400360 ST-06 Gray $5.88MNJ211810 AD-IA-01 Orange $10.32 Super Turbo Flat Fan 140° Air InductedMNJ211815 AD-IA-015 Green $10.32 MNJ411310 ST-IA-01 Orange $10.32MNJ211820 AD-IA-02 Yellow $10.32 MNJ411315 ST-IA-015 Green $10.32MNJ211825 AD-IA-025 Lilac $10.32 MNJ411320 ST-IA-02 Yellow $10.32MNJ211830 AD-IA-03 Blue $10.32 MNJ411325 ST-IA-025 Lilac $10.32MNJ211840 AD-IA-04 Red $10.32 MNJ411330 ST-IA-03 Blue $10.32MNJ211850 AD-IA-05 Brown $10.32 MNJ411340 ST-IA-04 Red $10.32MNJ211860 AD-IA-06 Gray $10.32 Deflector/Flood 130° StandardAnti-Drift Flat Fan 110° Standard MNJ500305 MDC-0.5 Orange $4.92MNJ200110 AD-01 Orange $4.18 MNJ500307 MDC-0.75 Green $4.92MNJ200115 AD-015 Green $4.18 MNJ500310 MDC-1.0 Yellow $4.92MNJ200120 AD-02 Yellow $4.18 MNJ500315 MDC-1.5 Blue $4.92MNJ200130 AD-03 Blue $4.18 MNJ500320 MDC-2.0 Red $4.92MNJ200140 AD-04 Red $4.18 MNJ500325 MDC-2.5 Brown $4.92MNJ200150 AD-05 Brown $4.18 MNJ500330 MDC-3.0 Gray $4.92Anti-Drift Flat Fan 110° Air Inducted MNJ500340 MDC-4.0 White $4.92MNJ211110 AD-IA-01 Orange $10.32 MNJ500350 MDC-5.0 Light Blue $4.92MNJ211115 AD-IA-015 Green $10.32 MNJ500375 MDC-7.5 Light Green $4.92MNJ211120 AD-IA-02 Yellow $10.32 Deflector/Flood 150° Air InductedMNJ211125 AD-IA-025 Lilac $10.32 MNJ511305 TM-IA-0.5 Orange $11.64MNJ211130 AD-IA-03 Blue $10.32 MNJ511307 TM-IA-0.75 Green $11.64MNJ211140 AD-IA-04 Red $10.32 MNJ511310 TM-IA-1.0 Yellow $11.64MNJ211150 AD-IA-05 Brown $10.32 MNJ511315 TM-IA-1.5 Blue $11.64MNJ211160 AD-IA-06 Gray $10.32 MNJ511320 TM-IA-2.0 Red $11.64Twin Outlet Flat Fan 110° Standard MNJ511325 TM-IA-2.5 Brown $11.64MNJ300110 AD-01.D Orange $7.27 MNJ511330 TM-IA-3.0 Gray $11.64MNJ300115 AD-015.D Green $7.27 MNJ511340 TM-IA-4.0 White $11.64MNJ300120 AD-02.D Yellow $7.27 MNJ511350 TM-IA-5.0 Light Blue $11.64MNJ300125 AD-025.D Lilac $7.27 MNJ511375 TM-IA-7.5 Light Green $11.64MNJ300130 AD-03.D Blue $7.27 MagnoJet Quick Coupling CapsMNJ300140 AD-04.D Red $7.27 MNJ000110 M-223 White; AD $0.98MNJ300150 AD-05.D Brown $7.27MNJ000111 M-224Green; AD-IA, AD-IA/D, ST-IA, TM-IA$1.48MNJ300160 AD-06.D Gray $7.27MNJ300180 AD-08.D White $7.27Twin Outlet Flat Fan 110° Air InductedMNJ000112 M-231 Yellow; AD-D, ST, MDC $0.98MNJ311110 AD-IA/D-01 Orange $11.64MNJ311115 AD-IA/D-015 Green $11.64 MagnoJet FiltersMNJ311120 AD-IA/D-02 Yellow $11.64 MNJ000100 M-142 Red; 50 Mesh $0.81MNJ311125 AD-IA/D-025 Lilac $11.64 MNJ000101 M-143 Blue; 80 Mesh $0.81MNJ311130 AD-IA/D-03 Blue $11.64 MNJ000102 M-144 Green; 100 Mesh $0.81MNJ311140 AD-IA/D-04 Red $11.64 MagnoJet Rubber SealsMNJ311150 AD-IA/D-05 Brown $11.64 MNJ000103 M-217 For all caps $0.26VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 51radura disC MoWer bladesRolled Edges for Greater Strength and Durability with Less Chipping and Breakage than other Brands with Ground Edges.Advantages of RADURA® quality blades• Highest wear life due to special edge making process• Maximum safety due to rigorous quality control and testing• Tens of millions used by OEM and aftermarket customers• Excellent corrosive protectionThe trademark RADURA® is world famous for disc mower blades with a long service life and a clean cut.A special cold rolling process of the cutting edges on the RADURA® blade results in a more durable cutting edge and maintains a sharp edge longer than blades with ground edges. RADURA® blades are used by the leading disc mower manufacturers and are the first choice in the replacement market worldwide. Radura Disc Mower BladesProduct ID Application Width Length Hole Size PriceRSP041864 Claas, Deutz-Fahr, Fella, Krone Flat 1.575 3.780 0.748 $1.03RSP041870 Deutz-Fahr LH 1.575 3.780 0.748 $1.18RSP041874 Deutz-Fahr LH 1.575 3.543 0.748 $1.08RSP041879 Greenland, John Deere, Kuhn, Massey Ferguson, New Holland, PZ Zweegers LH 1.575 3.425 0.640 $1.20RSP041882 Greenland, John Deere, Kuhn, Massey Ferguson, New Holland, PZ Zweegers RH 1.575 3.425 0.640 $1.20RSP041887 Deutz-Fahr SM55 Flat 1.575 3.780 $1.40RSP041895 Galfre, Maragon Flat 1.811 4.252 0.827 $1.78RSP041896 Galfre, Maragon Flat 1.811 4.252 0.827 $1.78RSP041899 PZ Zweegers Dome 1.811 4.134 0.827 $1.38RSP041926 Gehl, John Deere, Kuhn, New Holland, Sitrex LH 1.772 3.740 0.640 $1.63RSP041928 Gehl, John Deere, Kuhn, New Holland, Sitrex RH 1.772 3.740 0.640 $1.63RSP041973 Krone LH 1.890 4.409 0.748 $1.95RSP041974 Krone RH 1.890 4.409 0.748 $1.95RSP041986 Case-IH, New Holland LH 1.969 4.331 0.896 $2.08RSP041987 Case-IH, New Holland RH 1.969 4.331 0.896 $2.08RSP042006 Vicon LH 1.890 4.213 0.725 $2.05RSP042007 Vicon RH 1.890 4.213 0.725 $2.05RSP042010 Case-IH, Challenger, Gehl, Hesston, Massey Ferguson, New Idea RH 1.850 4.213 0.728 $2.05RSP042011 Case-IH, Challenger, Gehl, Hesston, Massey Ferguson, New Idea LH 1.850 4.213 0.728 $2.05RSP042014 Claas DISCO 210/250/260/290/300/340/3000/3050/8500 RH 1.890 4.527 0.748 $1.75RSP042015 Claas DISCO 210/250/260/290/300/340/3000/3050/8500 LH 1.890 4.527 0.748 $1.75RSP042018 Fella LH 1.890 4.173 0.748 $1.95RSP042019 Fella RH 1.890 4.173 0.748 $1.95RSP042022Case-IH, Challenger, Gehl, Hesston, John Deere, Kuhn, Massey Ferguson, New Holland, New IdeaLH 1.772 4.213 0.717 $1.95RSP042026Case-IH, Challenger, Gehl, Hesston, John Deere, Kuhn, Massey Ferguson, New Holland, New IdeaRH 1.772 4.213 0.717 $1.95RSP042030 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea RH 1.850 4.213 0.728 $2.05RSP042031 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea LH 1.850 4.213 0.728 $2.05RSP042034 Gehl, John Deere, Kuhn, New Holland LH 1.772 4.843 0.717 $2.03RSP042037 Gehl, John Deere, Kuhn, New Holland RH 1.772 4.843 0.717 $2.03RSP042049 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea RH 1.890 4.252 0.718 $2.05RSP042050 AGCO, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea LH 1.890 4.252 0.718 $2.05RSP042051 Krone LH 1.969 3.780 0.748 $1.78RSP042052 Krone RH 1.969 3.780 0.748 $1.78RSP042055 Case-IH, New Holland RH 1.969 4.331 0.896 $2.08RSP042056 Case-IH, New Holland LH 1.969 4.331 0.896 $2.08RSP042057 AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson, New Idea RH 1.969 4.724 0.906 $1.90RSP042059 AGCO, Bush Hog, Challenger, Hesston, Massey Ferguson, New Idea LH 1.969 4.724 0.906 $1.90RSP042064 Bush Hog, Case-IH, Fella, Gehl, Greenland, Lely, Massey Ferguson, New Idea, Vicon LH 1.890 4.724 0.728 $1.93RSP042066 Bush Hog, Case-IH, Fella, Gehl, Greenland, Lely, Massey Ferguson, New Idea, Vicon RH 1.890 4.724 0.728 $1.93RSP052697 Bush Hog, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea RH 1.969 4.724 0.896 $2.10RSP052698 Bush Hog, Case-IH, Challenger, Hesston, Massey Ferguson, New Idea LH 1.969 4.724 0.896 $2.10Please specify make and model so correct blade(s) can be selected.800.368.7773CALL TOLL-FREE TO ORDER TODAY.52High Quality, Effective and EfficientThe ProCut Section The greatest damage to knife sections and guards is caused by bent sections. With ProCut sections, this is eliminated because the entire knife section is heat-treated, not just the cutting edge as with conventional made sections. Therefore the section does not bend. This considerably lengthens the life of the knife and reduces damage to the guards. All ProCut sections are secured with special serrated bolts. The shoulder of the bolt wedges itself in the section and the knifeback. Self-locking nuts ensure a secure and durable splice. The cutouts in the center of the section help clean out residue buildup and also reduce the weight of the knife. The sections are not chrome plated. They are zinc plated and have a self-sharpening effect. Chromed sections have a surface that is much harder than the guards and wear the guards faster and do not stay sharp as long. Also, chrome plating is a very hazardous process and an environmental concern.The Sectional Knife All SCH cutter bars are manufactured as sectional knives. Now you can transport a sickle bar of any length in a car, pickup or ship it by overnight carrier. The spliced knife assemblies can be packaged in easy to handle nine foot or less lengths to virtually eliminate delays in delivery, damage in transport or injury in handling. Dealers can make up any length of knife from a minimal amount of segments. The special knife joint allows the sectional knife to perform in the same way as a one-piece knife and is as strong or stronger than the original knifeback.The Double Guard The guard is made out of high quality spring steel with an extremely hard and wear resistant surface. Because the bottom and top of the guard are bolted to the cutterbar, the guards hardly ever bend and never have the top lip break off, a common problem of standard guards. This extraordinary high stability has made the use of croplifters much more reliable, even under extreme working conditions. Beveled guard cutting edges hold the crop more firmly, and do not pull it into the cutting gap; this considerably improves the discharge of the cut crop. The cutting forces and therefore the power expended is reduced substantially. The depth of hardening on the cutting edge of the guard is increased by about 30% because of the beveled edge. As a result, the guards last longer. The SCH EasyCut II guard gets more crop through the cutting system. The cutting edge was lengthened by 7% and the cutaway was enlarged for better flow. In addition, the blunt guard eliminates spearing of residue, especially in no-till conditions.The Cutting System The combination of the SCH EasyCut II guard and cutterbar knife create a cutting system which can be used for cutting almost everything in the world of forestry and agriculture. Even onions or hedges present no problem to the SCH EasyCut II system. The design of the EasyCut II guard also eliminates hold down clamps, shims and all of the adjusting that goes with them. Unlike other cutting systems, there’s no upward pressure on the knife. With the section alternately cutting against the top and bottom of the guards, the cutting edges stay close together. Because the knife remains balanced, you get top cutting performance from start to finish. And with our system always in balance, it keeps cutting under more severe conditions, it’s easier to drive, and we have less breakage.sCH easyCuT ii CuTTing sysTeMsCH easyCut ii cutting systems can be retrofitted on almost all types of combine harvesters, swathers, mower conditioners and sickle bar mowers.blunt guard causesless spearing of trashoptimized cutting edgesquare holeflatter +wider ridgeVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 53Replaces the standard wear plates on machines equipped with the SCH EasyCut II cutting system. Typically, a wear plate supports the knife. With today’s wider platforms and demand for better cutting performance this leads to more wear on the knifeback and wear plates. The SCH Bridge Rollers reduces the friction on the knifeback and allows the knife to run more smoothly for superior cutting performance.The Bridge Rollers are made with a hardened roller, sealed bearings and a cap to keep the dirt out. With reduced knife resistance there is less load on the wobble box. Replace existing wear plates on current SCH cutting systems or a new conversion kit can be ordered with Bridge Rollers. When replacing worn wear plates a new knifeback is required to maintain proper tolerances.Please refer to next page for kit prices.SCH Roller Guide System:• Less knifeback wear• Less friction• Less knifeback breakage• Easier knife installation• Less power required to drive the knife• Less platform vibrationsCH roller guide sysTeMTop Bridge RollerBottom Bridge RollersCH easyCuT ii CuTTing sysTeMsCH Wear PlaTe sysTeMA standard SCH EasyCut conversion kit includes wear plates that are hardened for longer life. The wear plate supports the knife back from behind ensuring a linear knife movement. In addition, the back edge of the knife section overlaps the knife back and rides on top of the wear plate keeping the cutting system in bal-ance. With these features it creates a tight fit in the double guard and eliminates the need for hold downs and the adjusting that goes with them. The SCH wear plate system is a big improvement over the stan-dard cutting system and provides superior performance even in the most difficult cutting conditions. The SCH wear plate system is an economical option and is recommended when cutting high moisture crops such as alfalfa or when harvesting in the dirt and mud such as in edible beans. Wear plates come in different thicknesses based upon the make and model of the machine that the SCH EasyCut kit is being installed on. In addition, there are different lengths to match the guards they are used with and to work around bolts or other obstacles on the header’s backbone. The wear plates can be replaced later with the SCH roller guide system but a new knife assembly is highly recommended at that time.SCH Wear Plate System:• Linear knife movement• Balanced cutting system• No hold downs or adjustments• Economically priced800.368.7773CALL TOLL-FREE TO ORDER TODAY.54Kit price includes all parts to convert to the SCH EasyCut II SYSTEM, including one pre-assembled knife with knifehead, (less bearing) all guards, and hardware, plus ten extra replacement sections with hardware and two guards. Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses. Also includes 10mm socket and 10mm wrench for section bolts.Note: The ideal cutter bar speed is 540 RPM for optimum cutting performance.For Most Combines, Windrowers, Mower Conditioners & MowerssCH easyCuT ii KiTs• EasyCut II blunt guard eliminates spearing of residue• EasyCut II guard gets more crop through the cutting system• SCH knife system never needs adjustment• SCH guards bolt to top and bottom of platform• SCH guards are fully heat treated• SCH guards have two beveled cutting edges• SCH sections are fully heat treated• SCH sections will not bend• Optional SCH rollers improve performance• Optional SCH rollers reduce friction & vibrationPrice Adjustments to SCH EasyCut KitsAll double drive kits Add $232.00All Hiniker bars Add $141.00All Massey Ferguson/Claas combine models Add $141.00All Massey Ferguson 8450 & 8460 models Add $141.00White combines with wobble box & Hart Carter floating cutter bar Deduct $78.00Massey Ferguson combines with wobble box & Hart Carter floating cutter bar Deduct $78.00Pitman arm style drives, Love and Hart Carter (combines only) Deduct $78.00SCP083690: Optional 540 RPM, 11-1/2” pulley for Case-IH oil bath header. $82.62SCH EasyCut Sickle Bar Mower Kit PricesWidth SCH Kit with Wear Plates SCH Kit with Rollers5 $313.00 $360.006 $387.00 $445.007 $447.00 $509.008 $509.00 $579.009 $569.00 $651.0010 $631.00 $724.00Kit price includes pre-assembled knife, without knifehead, all guards and hardware. Must re-use original equipment manufacturer (OEM) knifehead. No extra replacement parts are included. Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses.SCH EasyCut Kit PricesWidth SCH Kit w/ Wear PlatesSCH Kit w/ RollersSCH Roller Guide Kit* WidthSCH Kit w/ Wear PlatesSCH Kit w/ RollersSCH Roller Guide Kit*7 $686.00 $748.00 $92.00 19 $1,354.00 $1,514.00 $233.008 $735.00 $803.00 $95.00 20 $1,403.00 $1,574.00 $233.009 $784.00 $864.00 $110.00 21 $1,446.00 $1,623.00 $251.0010 $832.00 $920.00 $129.00 22 $1,494.00 $1,685.00 $269.0011 $882.00 $975.00 $129.00 22.5 $1,538.00 $1,734.00 $269.0012 $936.00 $1,041.00 $148.00 24 $1,587.00 $1,795.00 $283.0013 $986.00 $1,097.00 $159.00 25 $1,630.00 $1,844.00 $300.0014 $1,049.00 $1,170.00 $171.00 27 $1,716.00 $1,955.00 $318.0015 $1,116.00 $1,244.00 $184.00 30 $1,832.00 $2,089.00 $362.0016 $1,170.00 $1,305.00 $196.00 35 $2,028.00 $2,329.00 $422.0016.5 $1,201.00 $1,342.00 $196.00 36 $2,077.00 $2,383.00 $435.0017 $1,231.00 $1,378.00 $203.00 39 $2,252.00 $2,635.00 $473.0017.5 $1,263.00 $1,410.00 $208.00 40 $2,310.00 $2,690.00 $485.0018 $1,293.00 $1,446.00 $208.00 42 $2,406.00 $2,802.00 $506.0018.5 $1,323.00 $1,483.00 $220.00 45 $2,527.00 $2,827.00 $529.00*Installing a roller guide kit on an existing SCH EasyCut cutting system requires a new knifeback.VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 5555The SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your machine is not listed, this does not mean that we do not fit that machine. Please call for assistance.sCH easyCuT ii KiTsMfg. Type Model Description Lefthand KnifeheadGuards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mmAGCO Platform, Draper 9250 OEM x x OEMAGCO Platform, Flex 300 Series, Early Style SCP011195 x xAGCO Platform, Flex 500, 800, 8000, 300 Series, 3/4” knifehead SCP011222 x xAGCO Platform, Flex 500, 800, 8000, 300 Series, 7/8” knifehead SCP013997 x xAGCO Platform, Flex 8200 OEM x xAGCO Platform, Flex Hart Carter, Pitman Drive (1pc head) OEM x xAGCO Platform, Flex Hart Carter, Pitman Drive (2pc head) OEM x xAGCO Platform, Flex Hart Carter, Series 2 SCP11252 x xAGCO Platform, Rigid 300 Series, Rigid SCP011195 x xCase-IH Mower #9, 7/16” BB OEM x xCase-IH Mower #9, 1/2” BB OEM x xCase-IH Mower #31 OEM x xCase-IH Mower 1100, 100 OEM x xCase-IH Mower 1200 OEM x xCase-IH Mower 1300 OEM x xCase-IH Mower Cond. 990 SCP011259 x xCase-IH Mower Cond. 1190 SCP011185 x xCase-IH Mower Cond. 1490, 1590 SCP011186 x xCase-IH Mower Cond. 8330 SCP015474 x xCase-IH Mower Cond. SC414 SCP015474 x xCase-IH Platform, Draper 2062 SCP081373 x xCase-IH Platform, Draper 2152 SCP081379 x x SCP081380Case-IH Platform, Draper 2162 SCP081379 x x SCP081380Case-IH Platform, Draper 4000 SCP011185 x xCase-IH Platform, Flex 503 OEM x xCase-IH Platform, Flex 810 (4-1/2” COFS) SCP011252 x xCase-IH Platform, Flex 810 (5” COFS) SCP011227 x xCase-IH Platform, Flex 810 Hiniker SCP011227 x xCase-IH Platform, Flex 810 Pitman Drive OEM x xCase-IH Platform, Flex 820 SCP011226 x xCase-IH Platform, Flex 1020 SCP014266 x xCase-IH Platform, Flex 2020, early style SCP083792 x x SCP083793Case-IH Platform, Flex 2020, S/N all “HAJ” & up to CBJ021301 SCP011213 x x SCP011214Case-IH Platform, Flex 2020, S/N CBJ021301 and after SCP083815 x x SCP083816Case-IH Platform, Flex 3020 SCP002401 x xCase-IH Platform, Rigid 403 Hiniker OEM x xCase-IH Platform, Rigid 1010 SCP014266 x xCase-IH Windrower 201 OEM x xCase-IH Windrower 230 SCP011185 x xCase-IH Windrower 275 OEM x xCase-IH Windrower 375 OEM x xCase-IH Windrower 721 OEM x xCase-IH Windrower 725 OEM x xCase-IH Windrower 1275 SCP011229 x x Case-IH Windrower 5000, 7/16” BB SCP011185 x xCase-IH Windrower 5000, 1/2” BB SCP011185 x xCase-IH Windrower 6000 SCP015428 x xCase-IH Windrower 8220 SCP015474 x xCase-IH Windrower 8340 SCP015474 x xCase-IH Windrower 8360, 7/16” BB SCP015474 x xCase-IH Windrower 8370, 8830, 3/8” BB SCP015474 x x Case-IH Windrower 8370, 8830, 7/16” BB SCP015474 x x800.368.7773CALL TOLL-FREE TO ORDER TODAY.56sCH easyCuT ii KiTsMfg. Type Model Description Lefthand KnifeheadGuards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mmCase-IH Windrower 8380 SCP083616 x x SCP083617Case-IH Windrower 8820 SCP015474 x x SCP015475Case-IH Windrower 8840, 8870 SCP083616 x x SCP083617Case-IH Windrower HDX162 SCP083614 x x SCP083615Caterpillar Platform, Flex Caterpillar SCP011126 x xCaterpillar Platform, Flex Caterpillar SCP011126 x xCaterpillar Platform, Flex Caterpillar, 5/16” BB SCP011126 x xClaas Windrower S450 SCP011125 x xFord Mower 501 OEM x xFord Mower 505 OEM x xFord Mower 515 OEM x xFord Mower 642 OEM x xFrontier Mower 1477 OEM x xGehl Mower Cond. 1070 SCP083618 x xGehl Mower Cond. 1090 SCP083618 x xGehl Mower Cond. 1216 Hydra Swing SCP013667 x xGehl Mower Cond. 2130 SCP014534 x xGehl Mower Cond. 2160, 1/4” BB SCP014534 x xGehl Mower Cond. 2160, 7/16” BB SCP014534 x xGehl Mower Cond. 2170 SCP011280 x xGehl Mower Cond. 2270 SCP011280 x xGehl Mower Cond. 2650 SCP011229 x xGehl Mower Cond. 2850 SCP011229 x xGehl Mower Cond. HK108 OEM x xGehl Windrower 2230 SCP011229 x xGehl Windrower 2240 SCP011280 x xHesston Mower Cond. 1010 SCP011258 x xHesston Mower Cond. 1070, 1071, 3/8” BB SCP014534 x xHesston Mower Cond. 1085, 1090, 1091, 1095 SCP014534 x xHesston Mower Cond. 1110 SCP014534 x xHesston Mower Cond. 1120 SCP015474 x xHesston Mower Cond. 1150 SCP014534 x xHesston Mower Cond. 1160, 8200, 1/4” BB SCP015474 x xHesston Mower Cond. 1160, 8200, 3/8” BB SCP015474 x xHesston Mower Cond. 1160, 8200, 7/16” BB SCP015474 x xHesston Mower Cond. 1170 SCP083616 x x SCP083617Hesston Mower Cond. 1260, 7/16” BB SCP011229 x xHesston Mower Cond. 1265 Hydra Swing SCP011229 x xHesston Mower Cond. 1275 SCP083616 x x SCP083617Hesston Mower Cond. 1660, 1/4” BB SCP083616 x xHesston Mower Cond. PT 10 SCP011258 x xHesston Windrower 320 SCP011229 x xHesston Windrower 420 SCP011229 x xHesston Windrower 500, 1/2” BB SCP014534 x xHesston Windrower 520, 7/16” BB SCP014534 x xHesston Windrower 600 SCP011258 x xHesston Windrower 1014 Hydra Swing SCP011229 x xHesston Windrower 2262, 1/2” BB SCP014534 x x SCP014535Hesston Windrower 5200 SCP081363 x xHesston Windrower 6400, 6600, 5/16” BB SCP011229 x xHesston Windrower 6400, 6600, 3/8” BB SCP011229 x xHesston Windrower 6400, 6600, 7/16” BB SCP011229 x xHesston Windrower 6450, 6465 SCP014534 x x SCP014535Hesston Windrower 6455 SCP014534 x x SCP014535Hesston Windrower 6550 SCP014534 x x SCP014535Hesston Windrower 6600, 6610, 3/8” BB SCP011229 x xHesston Windrower 6600, 7/16” BB SCP011229 x xVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 5757sCH easyCuT ii KiTsMfg. Type Model Description Lefthand KnifeheadGuards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mmHesston Windrower 6655, 6665 SCP014534 x x SCP014535Hesston Windrower 8100 SCP015474 x x SCP015475Hesston Windrower 8400, 3/8” BB SCP083616 x x SCP083617Hesston Windrower 8400, 7/16” BB SCP083616 x x SCP083617Hesston Windrower 8450, 3/8” BB SCP083616 x x SCP083617Hesston Windrower 8450, 8840, 8870, 7/16” BB SCP083616 x xHesston Windrower 9300 SCP013667 x x SCP013668Honey Bee Platform, Draper Draper SCP014226 x xHoney Bee Platform, Draper Draper, 8mm wear plates SCP014226 x *Honey Bee Platform, Flex 3/16” BB, 8mm wear plates SCP014226 x * SCP014227Honey Bee Platform, Flex 1/4” BB SCP014226 x x SCP014227Honey Bee Platform, Flex Series 3 OEM x xJohn Deere Mower #5, 3/8” BB OEM x xJohn Deere Mower #5, 7/16” BB OEM x xJohn Deere Mower #8, #38, #39 OEM x xJohn Deere Mower #8W OEM x xJohn Deere Mower #9 OEM x xJohn Deere Mower #10 OEM x xJohn Deere Mower #11 OEM x xJohn Deere Mower #37 OEM x xJohn Deere Mower 50 (Bushing Knifehead) SCP083662 x xJohn Deere Mower 250, 350, 450 (Bearing Knifehead) SCP083663 x xJohn Deere Mower 250, 350, 450 (Bushing Knifehead) SCP083662 x xJohn Deere Mower 3700 SCP083663 x xJohn Deere Mower Cond. 485 (Ball Joint Knifehead) SCP011220 x xJohn Deere Mower Cond. 710 SCP011220 x xJohn Deere Mower Cond. 720 (Ball Joint Knifehead) SCP011220 x xJohn Deere Mower Cond. 720, 820, 7/16” BB SCP015427 x xJohn Deere Mower Cond. 720, 820, 1/2” BB SCP015427 x xJohn Deere Mower Cond. 820, 1/2” BB (Ball Joint Knifehead) SCP011220 x xJohn Deere Mower Cond. 1207 (Ball Joint Knifehead) SCP011220 x xJohn Deere Mower Cond. 1207 (Bearing Knifehead) SCP015427 x xJohn Deere Mower Cond. 1207 (Bushing Knifehead) SCP011196 x xJohn Deere Mower Cond. 1209 (Ball Joint Knifehead) SCP011220 x xJohn Deere Mower Cond. 1209 (Bearing Knifehead) SCP015427 x xJohn Deere Mower Cond. 1209 (Bushing Knifehead) SCP011196 x xJohn Deere Mower Cond. 1219 (Ball Joint Knifehead) SCP011220 x xJohn Deere Mower Cond. 1219 (Bearing Knifehead) SCP015427 x xJohn Deere Mower Cond. 1219 (Bushing Knifehead) SCP011196 x xJohn Deere Mower Cond. 1380, 1424 (K10) SCP011196 x xJohn Deere Mower Cond. 1380, 1424 (K42) SCP015427 x xJohn Deere Mower Cond. 1600 (Bearing Knifehead) SCP015427 x x SCP081378John Deere Platform, Draper 78 SCP011220 x xJohn Deere Platform, Draper 160 SCP015427 x xJohn Deere Platform, Draper 130, 3/8” BB SCP011196 x xJohn Deere Platform, Draper 130, 7/16” BB SCP011196 x xJohn Deere Platform, Auger 220, 230 (Ball Joint Knifehead) SCP011220 x xJohn Deere Platform, Auger 230, 240 (Needle Bearing) SCP015427 x xJohn Deere Platform, Draper 930, 936 SCP081352 x xJohn Deere Platform, Flex 200 Series SCP011207 x xJohn Deere Platform, Flex 600 Series HydraFlex SCP015421 x xJohn Deere Platform, Flex 900 Series SCP011207 x xJohn Deere Platform, Flex Hart Carter, Pitman Drive OEM x xJohn Deere Platform, Rigid 55 SCP011207 x xJohn Deere Platform, Rigid 55, Hart Carter, Pitman Drive OEM x xJohn Deere Platform, Rigid 200 Series SCP011207 x xJohn Deere Platform, Rigid 900 Series SCP011207 x x800.368.7773CALL TOLL-FREE TO ORDER TODAY.58sCH easyCuT ii KiTsMfg. Type Model Description Lefthand KnifeheadGuards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mmJohn Deere Windrower 300 (Bushing Knifehead) SCP011196 x x SCP011197John Deere Windrower 300, 1380,1424 (Bearing Knifehead) SCP015427 x x SCP081378John Deere Windrower 580, 1/4” BB OEM x xJohn Deere Windrower 580, 5/16” BB OEM x xJohn Deere Windrower 800, 2250, 2270, 3/8” BB SCP011220 x xJohn Deere Windrower 800, 7/16” BB SCP011220 x xJohn Deere Windrower 800, 1/2” BB SCP011220 x xJohn Deere Windrower 830 SCP011220 x xJohn Deere Windrower 880 SCP011220 x xJohn Deere Windrower 890 SCP015427 x xJohn Deere Windrower 2250 SCP011220 x xJohn Deere Windrower 2270 SCP011220 x xJohn Deere Windrower 2280 SCP011196 x xJohn Deere Windrower 2320, 2420 SCP015427 x xJohn Deere Windrower 2360 SCP015428 x xJohn Deere Windrower 2420, 1/2” BB SCP015427 x xKosch Mower 4840 OEM x xLove Platform, Flex Love Bar OEM x xMassey Ferguson Mower #41 OEM x xMassey Ferguson Mower #42 OEM x xMassey Ferguson Mower 410 OEM x xMassey Ferguson Mower Cond. 81 OEM x xMassey Ferguson Mower Cond. 725 SCP011263 x xMassey Ferguson Mower Cond. 925 SCP011263 x xMassey Ferguson Platform, Auger 1880 OEM x xMassey Ferguson Platform, Draper 220 OEM x xMassey Ferguson Platform, Draper 655, 675, 775, 785 SCP011188 x xMassey Ferguson Platform, Draper 885 SCP015428 x xMassey Ferguson Platform, Draper 9250 OEM x x OEMMassey Ferguson Platform, Flex 1859, 9100 Series OEM x xMassey Ferguson Platform, Flex 8200 OEM x xMassey Ferguson Platform, Flex 9224 Rotary SCP011255 x xMassey Ferguson Platform, Flex 9850 (AGCO Manufactured) SCP013997 x xMassey Ferguson Windrower 35 OEM x xMassey Ferguson Windrower 200 OEM x xMassey Ferguson Windrower 775 SCP011220 x xMassey Ferguson Windrower 785 SCP011188 x xMassey Ferguson Windrower 3850 SCP011222 x xM/F-Claas Windrower 36, 44 OEM x xM/F-Claas Platform, Flex 8450, 8460 SCP011125 x xM/F-White Platform, Flex 8560, 9520, 1/4” BB SCP011255 x xM/F-White Platform, Flex 8560, 9520, 3/8” BB SCP011255 x xM/F-White Platform, Flex 8920 SCP011255 x xM/F-White Platform, Flex 9300 SCP011255 x xM/F-White Platform, Flex 9330 SCP011255 x xM/F-Claas Platform, Rigid 8460 SCP011125 x xMacDon Mower Cond. 4000 SCP083669 x xMacDon Platform, Auger 920 SCP015428 x x SCP081351MacDon Platform, Draper 942 SCP015428 x x SCP081351MacDon Platform, Draper 972 SCP013667 x x SCP013668MacDon Platform, Draper 974 SCP081373 x xMacDon Platform, Draper FD70 SCP081379 x x SCP081380MacDon Platform, Draper FD75 SCP081379 x x SCP081380MacDon Platform, Draper D60 SCP081379 x x SCP081380MacDon Platform, Flex 973 SCP015428 x xMacDon Windrower 910 SCP015428 x xMacDon Windrower 920 SCP015428 x x SCP081351VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 5959sCH easyCuT ii KiTsMfg. Type Model Description Lefthand KnifeheadGuards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mmMacDon Windrower 960 SCP015428 x xMacDon Windrower 3000 OEM x xMacDon Windrower 5000, 5020 SCP013667 x xMacDon Windrower 5010 SCP013667 x xMacDon Windrower 7000 SCP015428 x xMccormick Mower Mower, 7/16” BB OEM x xNew Holland Mower 405 OEM x xNew Holland Mower 450, 455, 1/4” BB OEM x xNew Holland Mower 450, 455, 3/8” BB OEM x xNew Holland Mower 450, 455, 7/16” BB OEM x xNew Holland Mower 451, 456, 1/4” BB OEM x xNew Holland Mower 451, 456, 3/8” BB OEM x xNew Holland Mower 451, 456, 7/16” BB OEM x xNew Holland Mower 451, 456, 1/2” BB OEM x xNew Holland Mower Cond. 467 SCP011219 x xNew Holland Mower Cond. 469 SCP011219 x xNew Holland Mower Cond. 472, 477, 478 SCP011192 x xNew Holland Mower Cond. 474 SCP011191 x xNew Holland Mower Cond. 488, 479 SCP011192 x xNew Holland Mower Cond. 489, 3/8” BB SCP011191 x xNew Holland Mower Cond. 489, 7/16” BB SCP011191 x xNew Holland Mower Cond. 490 SCP011219 x xNew Holland Mower Cond. 492, 3/8” BB SCP011191 x xNew Holland Mower Cond. 492, 7/16” BB SCP011191 x xNew Holland Mower Cond. 495, 1495 SCP011224 x xNew Holland Mower Cond. 880 OEM x xNew Holland Mower Cond. 1496 OEM x x OEMNew Holland Platform, Flex 73C SCP011213 x x SCP011214New Holland Platform, Flex 74C, S/N all HAJ & up to PNL018301 SCP011213 x x SCP011214New Holland Platform, Flex 74C, S/N PNL018301 and after SCP083815 x x SCP083816New Holland Platform, Flex 740CF SCP002401 x xNew Holland Platform, Flex 94C, 8mm Plates SCP014226 xNew Holland Platform, Flex 972 SCP011213 x x SCP011214New Holland Platform, Flex 973 SCP011213 x xNew Holland Platform, Flex 9750 Rotary SCP011255 x xNew Holland Platform, Rigid 971 SCP011213 x xNew Holland Windrower 114 SCP083678 x x SCP083679New Holland Windrower 116, 1116 SCP011276 x x SCP011277New Holland Windrower 499, 1469, 1499 OEM x x OEMNew Holland Windrower 905 OEM x xNew Holland Windrower 910, 3/8” BB SCP011276 x x SCP011277New Holland Windrower 910, 7/16” BB SCP011276 x xNew Holland Windrower 912 SCP011276 x x SCP011277New Holland Windrower 1100 SCP011276 x xNew Holland Windrower 1112 SCP011276 x x SCP011277New Holland Windrower 1114 SCP011276 x x SCP011277New Holland Windrower 1118 SCP011276 x x SCP011277New Holland Windrower 1465, 3/8” BB SCP011191 x xNew Holland Windrower 1475, 3/8” BB SCP083614 x xNew Holland Windrower 1475, 2450, 2550, 2300 SCP083614 x x SCP083615New Holland Windrower 2216 SCP083614 x x SCP083615New Holland Windrower 2326 SCP083614 x x SCP083615New Idea Mower #40 OEM x xNew Idea Mower 251, 254 OEM x xNew Idea Mower 252 OEM x xNew Idea Mower 522, 3/8” BB OEM x xNew Idea Mower 522, 7/16” BB OEM x x800.368.7773CALL TOLL-FREE TO ORDER TODAY.60sCH easyCuT ii KiTsThese SCH EasyCut II Kits pages are a list of the most common machines that can be converted to the SCH EasyCut II cutter bar system. This may also be helpful in determining which parts to order for certain machines. If your machine is not listed, this does not mean that we do not fit that machine. Please call for assistance.Mfg. Type Model Description Lefthand KnifeheadGuards Wear Plates or Spacers Righthand Knifehead12mm 14mm 17mm 4mm 5mm 6mmNew Idea Mower 522, 1/2” BB OEM x xNew Idea Mower Cond. 290 OEM x xNew Idea Mower Cond. 299 OEM x xNew Idea Mower Cond. 509 SCP011186 x xNew Idea Mower Cond. 5107 OEM x xNew Idea Mower Cond. 5109 OEM x xNew Idea Mower Cond. 5112 SCP011186 x xNew Idea Mower Cond. 5114 SCP011186 x xNew Idea Platform, Flex 711 SCP011282 x xNew Idea Platform, Flex 713, 813 Uni Harvester OEM x xNew Idea Platform, Flex 715 Uni Harvester OEM x xNew Idea Platform, Flex 716S SCP011282 x xNew Idea Platform, Flex 815 SCP011282 x xOliver Mower 82 OEM x xOliver Platform, Flex 525 OEM x xOliver Platform, Flex 7600 OEM x xOwatonna Mower 20, Pitman Drive OEM x xOwatonna Mower Cond. 200 SCP011280 x xOwatonna Windrower 235 SCP011280 x xOwatonna Windrower 260, 270, 280 SCP011280 x xOwatonna Windrower 265, 275, 285 SCP011280 x xOwatonna Windrower 280 SCP015428 x xOwatonna Windrower 280, 7/8”-18 Threaded Knifehead SCP011281 x xRenn Windrower 2000 SCP011220 x xRowse Mower 3/8” BB OEM x xRowse Mower 7/16” BB OEM x xVersatile Windrower #10 SCP011193 x xVersatile Windrower 400, 3” C.O.F.S. SCP011217 x xVersatile Windrower 400, 3/1/2” C.O.F.S. SCP011193 x xVersatile Windrower 2800 OEM x xVersatile Windrower 4018 OEM x xVersatile Windrower 4022 OEM x xVersatile Windrower 4025 OEM x x OEMVersatile Windrower 4030 SCP083677 x x SCP083680Versatile Windrower 4400 SCP011217 x xVicon Windrower 722 SCP011188 x xWhite Platform, Flex Kwik Cut OEM x xWhite Windrower 6200 SCP011188 x xVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 61sCH easyCuT ii Knife asseMblies(1) (2)(3) (4)Coarse Section7 Serrations/InchFine Section10 Serrations/Inch• (1) & (3) Original knife assembly has the knife sections installed the same way as the original knife assembly. • (2) & (4) Replacement knife assembly has the knife sections installed the opposite way as the original knife assembly. • If unsure how the knife assembly starts, order the knife with a half section because the half section can be easily removed. • Some knife assemblies may need cut to length to match original knife.• Please specify coarse (7 serrations per inch) or fine (10 serrations per inch) knife sections. Coarse is recommended for soybeans and alfalfa; fine is recommended for wheat and grasses.SCH SectionsProduct ID Description PriceSCP110978 Section, SCH, Coarse, Box of 25 (standard on all SCH kits) $39.92SCP080502 Section, SCH, Coarse, 10-Pack (includes 10 sections & hardware) $21.61SCP110961 Section, SCH, Fine, Box of 25 (wheat or grass only applications) $39.92SCP080504 Section, SCH, Fine, 10-Pack (includes 10 sections & hardware) $21.61SCP080503 Hardware, SCH Bolt & Nut 50-Pack (hardware for 25 SCH sections) $14.31SCP013935 Half Section, SCH, Single $2.22Coarse sections (7 serrations per inch) are recommended for soybeans and alfalfa. Fine sections (10 serrations per inch) are recommended for wheat and grasses.SCH Knife Assembly PiecesProduct ID Description Length Where Used PriceSCB081602 Knife Assembly, #1 Bar 102.25” Left hand end, 32 sections + 1/2 section, original $132.35SCB081603 Knife Assembly, #1R Bar 99.25” Left hand end, 31 sections + 1/2 section, replacement $128.22SCB081604 Knife Assembly, #2 Bar 100.25” Left hand end, 32 sections, original $132.35SCB081605 Knife Assembly, #2R Bar 97.25” Left hand end, 31 sections, replacement $128.22SCB081606 Knife Assembly, #3 Bar 89.75” Middle piece, 27 sections $111.68SCB081607 Knife Assembly, #4 Bar 106.25” Right hand end, 28 sections $115.81SCB081608 Knife Assembly, #5 Bar 82.25” Right hand end, 22 sections $90.99SCB081609 Knife Assembly, #6 Bar 58.25” Right hand end, 14 sections $57.91SCB081610 Knife Assembly, #7 Bar 34.25” Right hand end, 8 sections $33.08SCB081611 Knife Assembly, #8 Bar 22.25” Right hand end, 4 sections $16.53Where used is in reference to left hand single-drive platforms.SCH KnifebackProduct ID Description Length Where Used PriceSCP012022 Knifeback, #1 Bar 102.25” Left hand end, drilled for 1/2 section, original $49.37SCP012031 Knifeback, #1R Bar 99.25” Left hand end, drilled for 1/2 section, replacement $48.48SCP012023 Knifeback, #2 Bar 100.25” Left hand end, drilled for full section, original $49.37SCP012032 Knifeback, #2R Bar 97.25” Left hand end, drilled for full section, replacement $48.48SCP012024 Knifeback, #3 Bar 89.75” Middle piece $46.47SCP012025 Knifeback, #4 Bar 106.25” Right hand end $52.27SCP012026 Knifeback, #5 Bar 82.25” Right hand end $40.65SCP012027 Knifeback, #6 Bar 58.25” Right hand end $34.86SCP012030 Knifeback, #7 Bar 34.25” Right hand end $16.82SCP012028 Knifeback, #8 Bar 22.25” Right hand end $11.60Where used is in reference to left hand single-drive platforms.SCH Knife Assemblies Starting With A HALF SectionSCH Knife Assemblies Starting With A FULL SectionKnife Assembly LengthNumber of SectionsOriginal Knife Assembly Product ID (1)Replacement Knife Assembly Product ID (2)PriceKnife Assembly LengthNumber of SectionsOriginal Knife Assembly Product ID (3)Replacement Knife Assembly Product ID (4)Price7’ 1/2 + 30 SCB210300 SCB210301 $123.95 7’ 30 SCB220300 SCB220301 $123.958’ 1/2 + 34 SCB210340 SCB210341 $140.47 8’ 34 SCB220340 SCB220341 $140.479’ 1/2 + 38 SCB210380 SCB210381 $157.00 9’ 38 SCB220380 SCB220381 $157.0010’ 1/2 + 42 SCB210420 SCB210421 $173.53 10’ 42 SCB220420 SCB220421 $173.5311’ 1/2 + 46 SCB210460 SCB210461 $190.06 11’ 46 SCB220460 SCB220461 $190.0612’ 1/2 + 50 SCB210500 SCB210501 $206.58 12’ 50 SCB220500 SCB220501 $206.5813’ 1/2 + 54 SCB210540 SCB210541 $223.10 13’ 54 SCB220540 SCB220541 $223.1015’ 1/2 + 62 SCB210620 SCB210621 $256.15 15’ 62 SCB220620 SCB220621 $256.1516’ 1/2 + 66 SCB210660 SCB210661 $272.69 16’ 66 SCB220660 SCB220661 $272.6917’ 1/2 + 70 SCB210700 SCB210701 $289.21 17’ 70 SCB220700 SCB220701 $289.2118’ 1/2 + 74 SCB210740 SCB210741 $305.73 18’ 74 SCB220740 SCB220741 $305.7320’ 1/2 + 82 SCB210820 SCB210821 $338.78 20’ 82 SCB220820 SCB220821 $338.7822’ 1/2 + 90 SCB210900 SCB210901 $371.84 22’ 90 SCB220900 SCB220901 $371.8424’ 1/2 + 98 SCB210980 SCB210981 $404.89 24’ 98 SCB220980 SCB220981 $404.8925’ 1/2 + 102 SCB211020 SCB211021 $421.41 25’ 102 SCB221020 SCB221021 $421.4127’ 1/2 + 110 SCB211100 SCB211101 $454.47 27’ 110 SCB221100 SCB221101 $454.4730’ 1/2 + 122 SCB211220 SCB211221 $504.04 30’ 122 SCB221220 SCB221221 $504.0435’ 1/2 + 142 SCB211420 SCB211421 $586.67 35’ 142 SCB221420 SCB221421 $586.6736’ 1/2 + 146 SCB211460 SCB211461 $603.20 36’ 146 SCB221460 SCB221461 $603.20800.368.7773CALL TOLL-FREE TO ORDER TODAY.62sCH easyCuT ii ParTs• Improved Positioning• Improved Wear Resistance• Simplified MountingKnife Connector Kits Wear PlatesAll SCH Guards Are Color Coded & NumberedGuard Size Paint Color Number Identification12mm Gloss black Stamped with 5-digit product ID or a “2” on the bottom14mm Burnt orange Stamped with 5-digit product ID or a “4” on the bottom17mm Light gray Stamped with 5-digit product ID or a “7” on the bottomSCH Knife Connector Kits & KnifebackProduct ID Description PriceSCP083607 Connector bar with 1 extra bolt & insert $17.14SCP080000 Connector bar with 3 extra sections, 1 extra bolt & insert $21.69SCH Wear PlatesProduct ID Description PriceSCP017011 Wear plate, 4mm, 2-hole, (brown) $3.24SCP017012 Wear plate, 5mm, 2-hole, (blue) $3.89SCP017013 Wear plate, 6mm, 2-hole, (black) $4.52SCP017014 Wear plate, 4mm, 3-hole, (brown) $3.69SCP017015 Wear plate, 5mm, 3-hole, (blue) $4.19SCP017016 Wear plate, 6mm, 3-hole, (black) $4.70SCP010741 Wear plate, 4mm, 4-hole, (brown) $4.07SCP010742 Wear plate, 5mm, 4-hole, (blue) $4.52SCP010743 Wear plate, 6mm, 4-hole, (black) $5.03SCP010753 Wear plate, 5mm, 4-hole, double sided, (blue) $5.79SCP010754 Wear plate, 6mm, 4-hole, double sided, (black) $6.30Note: Number stamped on top of wear plate indicates thickness in millimeters. Color also indicates thickness. See above.SCH EasyCut II 2-Point Standard GuardProduct ID Description PriceSCP016538 12mm 2-point standard guard $19.30SCP016539 14mm 2-point standard guard $19.30SCP016540 17mm 2-point standard guard $19.30SCH EasyCut II 2-Point Open Top GuardProduct ID Description PriceSCP016517 12mm 2-point open top guard $32.04SCP016518 14mm 2-point open top guard $32.04SCP016470 17mm 2-point open top guard $32.04SCH EasyCut II 2-Point Head GuardProduct ID Description PriceSCP017573 17mm 2-point head guard, for Case-IH 1020* $35.10*For most other models an open top guard can be used instead of a head guard.SCH EasyCut II 3-Point Standard GuardProduct ID Description PriceSCP016541 12mm 3-point standard guard $36.35SCP016542 14mm 3-point standard guard $36.35SCP016543 17mm 3-point standard guard $36.35SCH Spacer PlatesSCP015810 SCH spacer plate, 4mm, 2-hole (used with bridge roller) $2.36SCP015811 SCH spacer plate, 4mm, 3-hole (used with bridge roller) $3.50SCP015813 SCH spacer plate, 5mm, 2-hole (used with bridge roller) $2.36SCP015814 SCH spacer plate, 5mm, 3-hole (used with bridge roller) $3.50SCP015816 SCH spacer plate, 6mm, 2-hole (used with bridge roller) $2.36SCP015817 SCH spacer plate, 6mm, 3-hole (used with bridge roller) $3.50SCP083789 SCH spacer plate, 8mm, 2-hole (used with bridge roller) $2.90SCP083790 SCH spacer plate, 8mm, 3-hole (used with bridge roller) $5.09SCH CropliftersProduct ID Description PriceSCP114927 SCH ASX-100 croplifter; guards that are 5.7 - 6.0” long; SCH EasyCut I only $21.64SCP016445 SCH ASK-100 croplifter; guards that are 5.7 - 6.0” long; SCH EasyCut I & II $26.64SCP016588 SCH ASK-121 croplifter; guards that are 5.75 - 6.125” long $26.64SCP016587 SCH ASK-120 croplifter; guards that are 6.1 - 6.4” long $26.64SCP016589 SCH ASK-127 croplifter; guards that are 6.5 - 6.7” long $26.64SCP010142 SCH AS-100/2 croplifter; JD 600 series rigid & draper, 900 series draper with 4” OEM long guards; H213405, H229539 $26.64SCP013549 SCH AS-100/5 croplifter; JD 200, 900 series auger platforms with OEM guards, H113571, H145791, H153719, H171031 $26.64SCP010658 SCH spool fastener, required to install croplifters $1.60Note: Croplifters for other guards not listed above may be available. Call with measurement from tip of guard point to the center of the guard bolt hole for correct fit. SCH Bridge RollersProduct ID Description PriceSCP015768SCH bridge roller, bottom. Introduced in 2007; bolts on top of guard and edge of roller rides on bottom of the section$13.98SCP016330SCH bridge roller, top. Introduced in 2010; bolts on top of guard and edge of roller rides on top of section.$13.98VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 63SCH Guard HardwareProduct ID Description Price Product ID Description PriceHDW210118 HHCS, 3/8”-16 x 1-1/4” $0.17 HDW210221 HHCS, 10-1.5mm x 40mm $0.20HDW210117 HHCS, 3/8”-16 x 1-1/2” $0.18 HDW210222 HHCS, 10-1.5mm x 45mm $0.28HDW210119 HHCS, 3/8”-16 x 1-3/4” $0.20 HDW210223 HHCS, 10-1.5mm x 50mm $0.36HDW210120 HHCS, 3/8”-16 x 2” $0.22 HDW210225 HHCS, 10-1.5mm x 60mm $0.48HDW210122 HHCS, 3/8”-16 x 2-1/4” $0.26 HDW210224 HHCS, 10-1.5mm x 70mm $0.60HDW210121 HHCS, 3/8”-16 x 2-1/2” $0.30 HDW220002 Carriage bolt, 10-1.5mm x 40mm $0.40HDW210124 HHCS, 3/8”-16 x 3” $0.32 HDW220015 Carriage bolt, 10-1.5mm x 45mm $0.45HDW210159 Nut, serrated flange, 3/8”-16 $0.06 HDW220016 Carriage bolt, 10-1.5mm x 50mm $0.50HDW210184 Washer, USS flat, 3/8” $0.03 HDW220027 Carriage bolt, 10-1.5mm x 55mm $0.60HDW210183 Washer, SAE flat, 3/8” $0.02 HDW220003 Nut, flange, 10-1.5mm $0.10sCH easyCuT ii ParTs16mm Nut Machined WasherGuard TipBallSplice Kit KnifeheadCenter Guard Overlap StrapKnifeHardwareSCH InsertsProduct ID Description PriceSCP010937 Insert, for splice kit $0.70SCP010941 Insert, for knifehead $0.64SCH Skid PlatesSCH Knife HardwareProduct ID Description PriceSCP010931 Bolt, 6mm x 16mm, for section $0.29SCP010067 Bolt, 6mm x 18mm, for knifehead & splice $0.26SCP083610 Bolt, 6mm x 20mm, for knifehead $0.30SCP010071 Bolt, 6mm x 25mm, for knifehead $0.35SCP010072 Bolt, 6mm x 28mm, for knifehead $0.38SCP013961 Nut, flange, 6mm $0.15SCP083611 Screw, 1/4” x 1” flat head, for H/C 2 piece head $0.33SCP083612 Nut, 1/4”-20 center lock, for H/C 2 piece head $0.11SCH Miscellaneous PartsProduct ID Description PriceSCP010050 Nut, 16mm for ball joint knifeheads $2.61SCP010660 Washer, for ball joint knifeheads $1.91SCP083613 Bottom strap for H/C 2-piece head $45.14SCP010630 Guard tip ball $1.21SCH Skid PlatesProduct ID Description PriceSCP082817Skid Plate, fits model year 2006 and after, MacDon 973, 974, FD60, FD70, D60; Case-IH 2052, 2062, 2152, 2162; Required when installing SCH EasyCut on these headers.$12.75sCH Pro flex lifterSchumacher pulse crop lifters combine simple design with durability for your easy pulse crop harvest:• Compact design and easy mounting• Guarantees tight fit on all types of guards (long slot)• Length and angle of lifter finger is fully adjustable to allow for optimal work-ing conditions• White color of lifter finger provides maximum visibility in all crop conditions• High quality material ensures extended durability of the lifter finger• Specially designed for down edible beans, lentils, peas and other short cropsWith the specially designed slot, the PRO FLEX lifter can fit perfectly on most types of guards. That’s why the SCH pulse lifter guarantees a tight fit.Product ID Description PriceSCP017646 SCH Pro Flex Lifter, with spacer 52.23SCP017937 Replacement Finger 8.90SCP080178 Package of 25, hardware kit * 19.50SCP080179 Package of 25, hardware kit * 16.00SCP080181 Package of 25, hardware kit * 23.25* Hardware kit is required for installation. Determined by make and model of guard.PRO FLEX lifter will fit Schumacher guards as well as most forged guardsSCH Double Drive PartsProduct ID Description PriceSCP010045 Bolt, countersunk, 6mm x 16mm $0.22SCP010071 Bolt, 6mm x 25mm, for knifehead $0.35SCP016519 12mm 2-point open top center guard $32.04SCP016520 14mm 2-point open top center guard $32.04SCP016469 17mm 2-point open top center guard $32.04SCP013666 Overlap strap, 2 sections $22.56SCP013665 Overlap strap, 3 sections $23.84SCP013961 Nut, flange, 6mm $0.15SCP016222 Section, countersunk, fine $2.87SCP016223 Section, countersunk, coarse $2.87800.368.7773CALL TOLL-FREE TO ORDER TODAY.64sCH easyCuT ii KnifeHeadsSCH Hardware Kits for KnifeheadsProduct ID Description PriceSCP083601 Parts package, for knifeheads with top strap $4.14SCP083784 Parts package, for knifeheads without top strap $4.14AGCOProduct ID Description PriceSCP081363 AGCO, 5100 draper, LH $146.82SCP013997AGCO, 300 series flex, late model, LH 400 series rigid, LH 500, 800, 8000 series flex; 7/8” tie rod style, LH Note: Replaces OEM knifeheads with adjustable register$107.32SCP011222AGCO, 300 series flex, late model, LH 400 series rigid, LH 500, 800, 8000 series flex; 3/4” tie rod style, LH Note: Replaces OEM knifeheads with adjustable register$107.32SCP011195AGCO, 300 series flex, early model bushing style, 300 & 700 rigid, LH$117.20SCP011252 AGCO, Hart Carter Series 2 floating cutter bar, LH $117.20SCP011279 AGCO, Hiniker floating cutter bar, LH $146.82SCP011266 AGCO, crank arm style, rigid, LH $117.20Case-IHProduct ID Description PriceSCP002401 Case-IH, 3020, LH $253.98SCP002896 Case-IH, 3020, double drive, RH $253.98SCP081379 Case-IH, 2162, flex draper, LH $94.98SCP081380 Case-IH, 2162, flex draper, double drive, RH $94.98SCP013667 Case-IH, 2152, rigid draper, LH $102.39SCP013668 Case-IH, 2152, rigid draper, double drive, RH $102.39SCP081373 Case-IH, 2062, flex draper, LH $94.98SCP081381 Case-IH, 2062, flex draper, double drive, RH $94.98SCP083815 Case-IH, 2020, S/N CBJ021301 and after, LH $94.98SCP083816Case-IH, 2020, S/N CBJ021301 and after, double drive, RH$94.98SCP011213Case-IH, 2020, S/N all “HAJ” & up to CBJ021301, LH$94.98SCP011214Case-IH, 2020, S/N all “HAJ” & up to CBJ021301, double drive, RH$94.98SCP083792 Case-IH, 2020, double drive early style, LH $94.98SCP083793Case-IH, 2020, double drive early style, double drive, RH$94.98Case-IH - ContinuedProduct ID Description PriceSCP014266 Case-IH, 1010, 1020, LH $146.82SCP011226 Case-IH, 820, LH $117.20SCP011227Case-IH, 810, 5-1/4” from center of knifehead bearing to center of first full section, LH$117.20SCP011252Case-IH, 810, 4-1/4” from center of knifehead bearing to center of first full section, LH$117.20SCP011185 Case-IH, 230, 1190, 4000, 5000, LH $146.82SCP011259 Case-IH, 990, LH $117.20SCP011186 Case-IH, 1490, 1590, LH $146.82SCP015474Case-IH, 8220, 8330, 8340, 8360, 8370, 8820, 8830, SC414, LH$94.98SCP015475Case-IH, 8220, 8330, 8340, 8360, 8370, 8820, 8830, SC414, double drive, RH$94.98ClaasProduct ID Description PriceSCP016326Claas, 8450, 8460, 20’ and more, bearing not included, LH$192.70SCP015949 Claas, bearing for SCP016326 knifehead $139.75SCP011125Claas 642, 8450, 8460, S450, 15’ and less, bearing not included, LH$132.01SCP011127 Claas, bearing for SCP011125 knifehead $120.42SCP011252 Claas, Hart Carter Series 2 floating cutter bar, LH $117.20GehlProduct ID Description PriceSCP083618 Gehl, 1070, 1090, LH $94.98SCP011229 Gehl, 2230, 2650, 2850, LH $102.39HesstonProduct ID Description PriceSCP013668 Hesston, 9300, lap double drive, RH $102.39SCP081363 Hesston, 5200 draper, LH $146.82VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 65sCH easyCuT ii KnifeHeadsSCH Hardware Kits for KnifeheadsProduct ID Description PriceSCP083601 Parts package, for knifeheads with top strap $4.14SCP083784 Parts package, for knifeheads without top strap $4.14Hesston - ContinuedProduct ID Description PriceSCP014534Hesston, 500, 520, 1070, 1071, 1085, 1090, 1091, 1095, 1110, 1150, 6450, 6455, 6465, 6550, 6655, 6665, LH$94.98SCP014535Hesston, 1014+2, 6450, 6455, 6550, 6655, 6665, double drive, RH$94.98SCP083616Hesston, 1170, 1275, 1160, 8400, 8450, 8840, 8870 LH$94.98SCP083617Hesston, 1170, 1275, 8400, 8450, 8840, 8870, double drive, RH$94.98SCP011229Hesston, 320, 420, 1014, 1260, 1265, 6400, 6600, 6610, LH$102.39SCP011258 Hesston, 600, 1010, PT-7, PT-10, LH $94.98SCP015474 Hesston, 1120, 1160, 8100, 8200, 8400, LH $94.98SCP015475Hesston, 1120, 1160, 8100, 8200, 8400, double drive, RH$94.98Honey BeeProduct ID Description PriceSCP014226 Honey Bee, model year 2002-current, LH $146.82SCP014227Honey Bee, model year 2002-current, double drive, RH$146.82John DeereProduct ID Description PriceSCP081352 John Deere, 900 series draper, LH $146.82SCP015421 John Deere, 600 series flex, LH $146.82SCP011207 John Deere, 200 & 900 series flex & rigid, LH $146.82SCP011121John Deere, crank arm style, rigid, bearing not included, LH$94.98SCP011122 John Deere, bearing for SCP011121 knifehead $151.23SCP011196John Deere, 130, 300, 1207, 1209, 1219, 1380, 1424, bushing style (serial #285000-), LH$102.39SCP011197John Deere, 300 double drives, bushing style (serial #285000-), double drive, RH$102.39SCP015427John Deere, 130, 160, 230, 300, 710, 720, 820, 890, 895, 1207, 1209, 1219, 1380, 1424, 1600, 2280, 2320, 2420, needle bearing style, LH$94.98SCP081378John Deere, 300, 890, 895, 1600 double drives, needle bearing style, double drive, RH$94.98John Deere - ContinuedProduct ID Description PriceSCP011220John Deere, 78, 220, 230, 485, 710, 800, 830, 880, 1207, 1209, 2250, 2270, ball joint style (serial # -285000), LH$146.82SCP083663 John Deere, 250, 350, 450, 3700, LH $94.98SCP015428 John Deere 2360, LH $94.98LexionProduct ID Description PriceSCP002413 Lexion, F535, F540, LH $253.98SCP002412 Lexion, F535, F540, double drive, RH $253.98MacDonProduct ID Description PriceSCP081379 MacDon, FD70, FD75, LH $94.98SCP081380 MacDon, FD70, FD75, double drive, RH $94.98SCP081373 MacDon, 974, LH $94.98SCP081381 MacDon, 974, double drive, RH $94.98SCP013667 MacDon, 972, 5000, 5010, 5020, D60, LH $102.39SCP013668 MacDon, 972, D60, double drive, RH $102.39SCP015428MacDon, 910, 920 lap double drive, 942, 960, 973, 7000, LH$94.98SCP081351MacDon, 920 lap double drive, 942 double drive, RH$94.98SCP015427 MacDon, 920, LH $94.98SCP081378 MacDon, 920, double drive, RH $94.98Massey-FergusonProduct ID Description PriceSCP011255Massey-Ferguson, 8560, 8920, 9300, 9520, 9750, Rotary, LH$132.01SCP016326Massey-Ferguson, 8450, 8460, 20’ and more, bearing not included, LH$192.70SCP015949Massey-Ferguson, bearing for SCP016326 knifehead$139.75800.368.7773CALL TOLL-FREE TO ORDER TODAY.66SCH Hardware Kits for KnifeheadsProduct ID Description PriceSCP083601 Parts package, for knifeheads with top strap $4.14SCP083784 Parts package, for knifeheads without top strap $4.14sCH easyCuT ii KnifeHeadsMassey-FergusonProduct ID Description PriceSCP011125Massey-Ferguson, 642, 8450, 8460, S450, 15’ and less, bearing not included, LH$132.01SCP011127Massey-Ferguson, bearing for SCP011125 knifehead$120.42SCP011211Massey-Ferguson, Hart Carter & Hiniker floating cutter bar, knifehead bushing at 0-degree angle, LH Note: For replacement only. New kits will reuse the OEM knifehead.$146.82SCP011212Massey-Ferguson, Hart Carter & Hiniker floating cutter bar, knifehead bushing at 5-degree angle, LH Note: For replacement only. New kits will reuse the OEM knifehead.$146.82SCP011263 Massey-Ferguson, 725, 925, LH $117.20SCP011188 Massey-Ferguson, 655, 675, 775, 785, LH $86.34SCP081363 Massey-Ferguson, 220 windrower, LH $146.82New HollandProduct ID Description PriceSCP002401 New Holland, 740CF, LH $253.98SCP002896 New Holland, 740CF, double drive, RH $253.98SCP011213New Holland, 73C; 74C S/N all “HAJ” & up to PNL018301; 970, 971, 972, 973, LH$94.98SCP011214New Holland, 73C; 74C S/N all “HAJ” & up to PNL018301; 970, 971, 972, 973, double drive, RH$94.98SCP083815New Holland, 74C S/N PNL018301 and after, double drives, LH$94.98SCP083816New Holland, 74C S/N PNL018301 and after, double drive, RH$94.98SCP011191 New Holland, 474, 489, 492, 1465, LH $94.98SCP011192 New Holland, 472, 477, 478, 479, 488, LH $94.98SCP083678 New Holland, 114 windrower, LH $111.03SCP083679New Holland, 114 windrower, double drive, RH$111.03SCP011276New Holland, 116, 910, 912, 1100, 1112, 1114, 1116, 1118, LH$86.34New Holland - ContinuedProduct ID Description PriceSCP011277New Holland, 116, 910, 912, 1112, 1114, 1116, 1118, double drive, RH$86.34SCP011219 New Holland, 461, 467, 469, 490, LH $94.98SCP011224 New Holland, 495, 1495, LH $94.98SCP083614New Holland, 1475, 2216, 2300, 2326, 2450, 2550, LH$94.98SCP083615New Holland, 1475, 2216, 2300, 2326, 2450, 2550, double drive, RH$94.98OwatonnaProduct ID Description PriceSCP011280Owatonna, 200, 206, 217, 235, 260, 265, 270, 275, 285, 7/8-18 threads per inch, LH$102.39SCP011281Owatonna, 260, 280, 7/8-14 threads per inch, LH$102.39VersatileProduct ID Description PriceSCP083677 Versatile, 4030, LH $94.98SCP083680 Versatile, 4030, double drive, RH $94.98SCP011193Versatile, 10, 400, 3-1/2” from center of knifehead bearing to center of first full section, LH$86.34SCP011217Versatile, 400, 4400, 3” from center of knifehead bearing to center of first full section, LH$86.34VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 67Comparison of SCH Pro-Drive to conventional cutterbar knife drivesAlmost all conventional cutterbar knife drives in combine harvesters have a knife stroke of between 3” and 3-1/3”. When a crop that is difficult to cut loads the cutting knife, the knife rarely travels the full length of the stroke. A considerable amount of the stroke is lost in deflecting gear housings, gear brackets, ball and socket joints and installed wobble boxes. Drives have been tested in which the stroke has fallen to 2-1/2” under load. The knocking and shaking this produces in the cutterbar is known to almost every expert in the field. It gives the impression that dull sections are being used.The SCH Pro-Drive high performance cutterbar knife drive eliminates all these problems. Built using planetary gears, these drives produce an absolutely linear knife movement when compared with wobble boxes or other oscillating and pendulum drives. The gears are in exact alignment with the knife. This means there is no need for reversing or oscillating levers, which causes the loss of stroke in other drives. The full length of the stroke generated by the planetary gears is transmitted to the knife. The SCH Pro-Drive high performance knife drives can be driven either horizontally or vertically.Advantages of SCH Pro-Drive to conventional cutterbar knife drivesThe SCH Pro-Drive high performance knife drive in conjunction with the uniquely simple SCH cutterbar system achieve cutting performances that had never been considered possible in the past, particularly in the case of self-propelled harvesters. The Pro-Drive planetary gear system is in rotation at all times. Therefore, there are no dead spots as in wobble or crank drives where arms and levers have to come to a full stop twice per revolution to change direction. These advantages mean that a change to a SCH Pro-Drive knife drive and cutterbar system will pay for itself in just a short time.Changing knives with the SCH Pro-DriveThe engineers have devised a brilliant method of attaching the knifehead to the drive that is a major advancement. Designed as a trapezoidal claw, the connection is easy and accurate. No bolts to line up, no bearings to adjust or shim, no fear that dirt might get into bearings, bushings, etc. Makes changing knives even in the field a breeze.Overstroke in the SCH Pro-Drive. The special construction of the planetary drive results in a precisely defined knife stroke. With a stroke of 85mm or 3-1/3” there is an overstroke of 4.4mm or 1/6” to either side.• Higher ground travel cutting speeds• Improved material flow with less reel work• Low maintenance• Minimal wear and easy service• Less plugging with “reverse gear” not used as often• Longer harvesting days, crops can be cut when there is dew on the ground• Very easy knife change, remove two bolts for easy in-the-field changes• Grease lubricated, eliminates the possibility of oil loss due to seal failureThe problem most knife drives have, is the loss of stroke length and force. This is addressed with the SCH ProDrive.sCH Pro-driVe Knife driVe800.368.7773CALL TOLL-FREE TO ORDER TODAY.68sCH Pro-driVe Knife driVeVertical Pro-DriveJohn Deere Flex Mounting BracketPro-Drive KnifeheadsCase-IH Flex Mounting BracketBearing Block AssemblySCH Pro-DriveProduct ID Description PriceSCP014869 SCH Pro-Drive 85V, vertical, 85mm (3.3”) stroke $1,625.00SCP012457 SCH Pro-Drive 130V, vertical, 130mm (5.1”) stroke $1,825.00SCP012466 SCH Pro-Drive 85H, horizontal, 85mm (3.3”) stroke $1,625.00SCP012472 SCH Pro-Drive 130H, horizontal, 130mm (5.1”) stroke $1,625.00SCP014714SCH Pro-Drive 89V, vertical, 89mm (3.5”) stroke Replaces John Deere #DE19785 on 620F, 622F, 625F, 630F and 635F flex platforms & 622R, 625R and 630R rigid platforms. Note: Does not include pulley and knifehead bearing block assembly.$1,725.00SCP014697SCH Pro-Drive 89V, vertical, 89mm (3.5”) stroke Replaces John Deere #DE19786 on 925D, 930D, 936D draper platforms. Note: Does not include pulley and knifehead bearing block assembly.$1,725.00SCP014811SCH Pro-Drive 85V, vertical, 85mm (3.3”) stroke Replaces drive on AGCO & Massey-Ferguson 7200, 8200. Note: Does not include pulley and knifehead bearing block assembly.$1,725.00Warranty: SCH Pro-Drives have a 1 year warranty on parts and labor from date in service.SCH Pulleys for Vertical Pro-DriveProduct ID Description PriceSCP012775 Pulley, 6-bolt, 180mm $152.55SCP083744 Pulley, 6-bolt, 190mm $152.55SCP012780 Pulley, 6-bolt, 200mm $152.55SCP012782 Pulley, 6-bolt, 210mm $152.55SCP012785 Pulley, 6-bolt, 220mm $152.55SCP012788 Pulley, 6-bolt, 230mm $152.55SCP012802 Pulley, 6-bolt, 240mm $152.55SCP012579 Hub, required if replacing keyed pulley with 6-bolt pulley $45.26SCH Adapters for Horizontal Pro-DriveProduct ID Description PriceSCP012573 Adapter, for 25.4mm (1”) shaft $68.01SCP012563 Adapter, for 31.7mm (1-1/4”) shaft $68.01SCP012564 Adapter, for 32.0mm shaft $68.01SCH Knifeheads for Pro-Drive With SCH Cutter BarProduct ID Description PriceSCP083748 Knifehead, Massey-White 9750 $146.82SCP011339 Knifehead, John Deere flex and rigid $146.82SCP011340 Knifehead, Case-IH flex and rigid $146.82SCP011341 Knifehead, AGCO flex and rigid $146.82SCH Knifeheads for Pro-Drive With OEM Cutter BarProduct ID Description PriceSCP011236 Clamp, used to manufacture custom knifehead $45.14SCP081353 Clamp, AGCO 300-800 series, 3/4” $60.38SCP081354 Clamp, AGCO 300-800 series, 7/8” $60.38SCP083629 Knifehead, Claas $146.82SCP081355 Knifehead, Case-IH 3” system $146.82SCP081357 Knifehead, John Deere flex and rigid $146.82SCH Pro-Drive Miscellaneous PartsProduct ID Description PriceSCP010099 Bolt, 10mm x 35mm allen head $0.50SCP010258 Bearing, for knifehead $95.29SCP012543 Nylon ring, for Pro-Drive knifehead $8.84SCP012766 Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; greaseable $151.23SCP014739 Bearing block assembly, SCH Pro-Drive 85V, 85H, 130V, 130H; sealed bearing $151.23SCP014742 Bearing block assembly, AGCO/MF 7200, 8200, 9250 (#71416424), JD Early 900D (#DE19373) $229.50SCP014230 Bearing block assembly, JD 600F, 600R, JD Late 900D (#DE19294) $189.00SCP082702 U-bracket, for John Deere flex mount $125.00SCP082705 U-bracket, for AGCO flex mount $125.00SCP083625 Mounting plate, used to manufacture custom bracket $68.01SCP083626 Clevis, 16mm, for John Deere late 900 series $29.56SCP083627 Clevis, 12mm, for John Deere early 900 series $29.56SCP083628 Clevis, 1/2”, for John Deere 200 series $29.56VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 69joHn deere sTabilizer KiTsCH Pro-driVe KiTsAll SCH Pro-Drive Conversion Kits Include:• 1-SCH Pro-Drive, vertical, 85mm (3.3”) stroke• 1-mounting bracket for SCH Pro-Drive• 1-drive pulley for SCH Pro-Drive• 1-extra nylon ring for knifehead• 1-knifeheadSize of the Boltin the ClevisWarranty: SCH Pro-Drives have a 1 year warranty on parts and labor from date in service.Recommended for John Deere 25’ - 30’ Flex Heads to Reduce VibrationJohn Deere Stabilizer KitProduct ID Description PriceSCP082802 Stabilizer kit, for John Deere 900 series flex heads $210.00Stabilizer Replacement PartsProduct ID Description PriceSCP082706 Tie rod assembly $115.00SCP082707 Bracket, anchor $17.00SCP082708 Bracket, angle $118.00SCP082709 “H” bracket $25.00Case-IH 1010, 1020 Series HeadersWith SCH Cutter BarSCH Cutter Bar Price DescriptionWith CIH Cutter BarCIH Cutter Bar PriceSCK100130 $2,150.00 Flex, 1020, greaseable wobble box, S/N JJC0215000 and lower SCK100140 $2,150.00SCK100131 $2,150.00 Fex, 1020, oil bath wobble box, S/N JJC0215001 - JJC0323604 SCK100141 $2,150.00SCK100132 $2,150.00 Flex 1020, oil bath wobble box, S/N JJC0323605 and up; CBJ023001 and up SCK100142 $2,150.00SCK100133 $2,100.00 Rigid, 1010 SCK100143 $2,100.00Note: All Case-IH 1020 kits require a runner exchange because the Pro-Drive mounting bracket is welded to the runner in a jig. A charge for the runner will be added to the above kit price and credited back if a runner is returned in useable condition. AGCO 300-8000 Series HeadersWith SCH Cutter BarSCH Cutter Bar Price DescriptionWith AGCO Cutter BarAGCO Cutter Bar PriceSCK100150 $2,150.00 Flex, 300-8000 Series SCK100155 $2,100.00Note: Please specify the tie rod bolt size (3/4” or 7/8”) with AGCO cutter bar.Massey-White 9750 Series HeadersWith SCH Cutter BarSCH Cutter Bar Price DescriptionWith M/F Cutter BarM/F Cutter Bar PriceSCK100160 $2,150.00 Flex, 9750 series SCK100162 $2,100.00Note: Knifehead for Massey-White cutting system is not available. A knifehead clamp is provided that must be welded to original knifehead strap.John Deere 200-900 Series HeadersWith SCH Cutter BarSCH Cutter Bar Price DescriptionWith JD Cutter BarJD Cutter Bar PriceSCK100100 $2,150.00 Flex, 4420, 6620 & 7720 through 1985 with 1/2” clevis* Flex, 9000 Series with 1/2” clevis* SCK100110 $2,150.00SCK100101 $2,150.00 Flex, 6620 & 7720 after 1985 with 1/2” clevis* Flex, 8820 with 1/2” clevis* SCK100111 $2,150.00SCK100102 $2,150.00 Flex, 4420, 6620 & 7720 through 1985 with 12mm clevis* Flex, 9000 Series with 12mm clevis* SCK100112 $2,150.00SCK100103 $2,150.00 Flex, 6620 & 7720 after 1985 with 12mm clevis* Flex 8820 with 12mm clevis* SCK100113 $2,150.00SCK100104 $2,150.00 Flex, 4420, 6620 & 7720 through 1985 with 16mm clevis* Flex, 9000 Series with 16mm clevis* SCK100114 $2,150.00SCK100105 $2,150.00 Flex, 6620 & 7720 after 1985 with 16mm clevis* Flex, 8820 with 16mm clevis* SCK100115 $2,150.00SCK100106 $2,100.00 Rigid, 4420, 6620 & 7720 through 1985 Rigid, 9000 Series SCK100116 $2,100.00SCK100107 $2,100.00 Rigid, 6620 & 7720 after 1985 Rigid, 8820 SCK100117 $2,100.00*The clevis size refers to the size of the bolt used on the flex knife drive horizontal stabilizer spring800.368.7773CALL TOLL-FREE TO ORDER TODAY.70rassPe Knife asseMbiles• UPS Shippable• Hardware is included• OEM quality parts• Available with Coarse or Fine SectionsRasspe OEM Replacement Sectional Knife AssembliesJohn Deere 200 & 900 Series with 3” Knife SectionsProduct ID Description PriceRSP052094 Knifehead, John Deere 200 & 900 series, replaces AH121075, KXE10217 $59.95RSP080019 Knife Assembly, John Deere 218, 918, w/ knifehead, 11-SPI sections $293.80RSP080020 Knife Assembly, John Deere 220, 920, w/ knifehead, 11-SPI sections $316.08RSP080021 Knife Assembly, John Deere 222, 922, w/ knifehead, 11-SPI sections $336.55RSP080022 Knife Assembly, John Deere 224, 924, w/ knifehead, 11-SPI sections $356.97RSP080023 Knife Assembly, John Deere 225, 925, w/ knifehead, 11-SPI sections $385.43RSP080024 Knife Assembly, John Deere 230, 930, w/ knifehead, 11-SPI sections $434.80RSP080040 Connector Kit, John Deere 200 & 900 series, 11-SPI sections $22.50RSP080044 Knife Assembly, John Deere 218, 918, w/ knifehead, 7-SPI sections $293.80RSP080045 Knife Assembly, John Deere 220, 920, w/ knifehead, 7-SPI sections $316.08RSP080046 Knife Assembly, John Deere 222, 922, w/ knifehead, 7-SPI sections $336.55RSP080047 Knife Assembly, John Deere 224, 924, w/ knifehead, 7-SPI sections $356.97RSP080048 Knife Assembly, John Deere 225, 925, w/ knifehead, 7-SPI sections $385.43RSP080049 Knife Assembly, John Deere 230, 930, w/ knifehead, 7-SPI sections $434.80RSP080057 Connector Kit, John Deere 200 & 900 series, 7-SPI sections $22.50Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (11-SPI) is recommended for wheat & grasses.Rasspe OEM Replacement Sectional Knife AssembliesJohn Deere 600 Series with 4” Knife SectionsProduct ID Description PriceRSP002559 Knifehead, John Deere 600 series, replaces AH220051 $82.50RSP080059 Knife Assembly, John Deere 620, w/o knifehead, 14-SPI sections $368.55RSP080060 Knife Assembly, John Deere 625, w/o knifehead, 14-SPI sections $467.75RSP080061 Knife Assembly, John Deere 630, w/o knifehead, 14-SPI sections $581.17RSP080062 Knife Assembly, John Deere 635, w/o knifehead, 14-SPI sections $666.17RSP080076 Connector Kit, John Deere 600 series, 14-SPI sections $32.50RSP080084 Knife Assembly, John Deere 620, w/o knifehead, 7-SPI sections $368.55RSP080085 Knife Assembly, John Deere 625, w/o knifehead, 7-SPI sections $467.75RSP080086 Knife Assembly, John Deere 630, w/o knifehead, 7-SPI sections $581.17RSP080087 Knife Assembly, John Deere 635, w/o knifehead, 7-SPI sections $666.17RSP080094 Connector Kit, John Deere 600 series, 7-SPI sections $32.50Coarse (7-SPI) is recommended for soybeans and alfalfa; fine (14-SPI) is recommended for wheat & grasses.Rasspe OEM Replacement Sectional Knife AssembliesCase-IH 1010 & 1020 SeriesProduct ID Description PriceRSP051520 Knifehead, Case-IH 1010 & 1020 series $93.18RSP080159 Knife Assembly, Case-IH 1010 & 1020 series, 17.5’ $328.00RSP080160 Knife Assembly, Case-IH 1010 & 1020 series, 20’ $359.47RSP080161 Knife Assembly, Case-IH 1010 & 1020 series, 22.5’ $395.83RSP080162 Knife Assembly, Case-IH 1010 & 1020 series, 25’ $400.63RSP080163 Knife Assembly, Case-IH 1010 & 1020 series, 30’ $473.67RSP080174 Connect Kit, Case-IH 1010 & 1020 series, 9-SPI sections $22.50Rasspe AGCO OEM Replacement SectionsProduct ID OEM Part Number Description PriceSCP011003 71135135, 71348175 Box of 25, AGCO coarse section, 7 serrations per inch $34.95SCP011001 71135135, 71348175 Box of 25, AGCO fine section, 10 serrations per inch $34.95Rasspe Case-IH OEM Replacement SectionsProduct ID OEM Part Number Description PriceRSP080140 112074A1 Box of 25, Case-IH section, 9 serrations per inch $29.25Rasspe John Deere OEM 3” Replacement SectionsProduct ID OEM Part Number Description PriceRSP010992 H160251, H168316, H207930 Box of 25, John Deere 3” coarse section, 7 serrations per inch. John Deere, 200, 900 series with 3” cutting system $29.25RSP080017 H136807, H207929 Box of 25, John Deere 3” fine section, 14 serrations per inch. John Deere, 200, 900 series with 3” cutting system $29.25Rasspe John Deere OEM 4” Replacement SectionsProduct ID OEM Part Number Description PriceRSP080010 H163131 Box of 25, John Deere 4” coarse section, 7 serrations per inch John Deere, 900 draper, 600 draper, 600 flex & rigid, 600 flex draper with 4” cutting system $56.25RSP080011 H153329 Box of 25, John Deere 4” fine section, 14 serrations per inch John Deere, 900 draper, 600 draper, 600 flex & rigid, 600 flex draper with 4” cutting system $56.25Rasspe New Holland OEM Replacement SectionsProduct ID OEM Part Number Description PriceSCP011007 848091 Box of 25, New Holland coarse section, 7 serrations per inch $34.95SCP011005 848091 Box of 25, New Holland fne section, 10 serrations per inch $34.95VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 71Rasspe AGCO OEM Replacement GuardsProduct ID OEM # Description PriceRSP12250071341601, 71116504 71386962Guard, 2-point, double hardened AGCO early model non-floating, all AGCO Series 3, 300, 400, 500, 700, 800, 7000, 8000, 8200, 9250$8.55Rasspe Case-IH OEM Replacement GuardsProduct ID OEM # Description PriceRSP127000 613838R2 187350A1Guard, 2-point with trash bar, double hardened Case-IH 820, 1010, 1020 $11.75RSP129901 1307299C2 334305A1Guard, 2-point without trash bar, double hardened Case-IH 1010, 1020; 2010, 2020 SN #CBJ020001 & up $11.45RSP121501 86615982 700707147Guard, 2-point with trash bar, 4-1/4” long, double hardened Case-IH 2010, 2020 prior to SN #CBJ020000 & all SN #HAJ $11.75RSP1210001326787C3, 483500R3 187346A1Guard, 2-point head guard with trash bar, double hardened Case-IH 820, 1010, 1020; 3 used on drive end $10.00Rasspe John Deere OEM Replacement GuardsProduct ID OEM # Description PriceRSP124001H113571, H145791 H153719, H171031Guard, 2-point, 3” cutting system, double hardened John Deere 200, 900 series rigid & flex headers $12.60RSP134000H25603, H171032 H153855Guard, 3-point, 3” cutting systems John Deere 200, 900 series rigid & flex headers $15.75RSP133981 H213398 H229537Guard, 3-point, long-short-long, 4” standard blunt point, double hardened John Deere, 600 series flex & flex draper$14.35RSP135071 H213507 H229538Guard, 3-point, short-long-short, 4” standard blunt point, double hardened John Deere 600 series flex & flex draper$14.35RSP187021 H218702Guard, 3-point, long-short-long, 4” no-till blunt point, double hardened John Deere 600 series flex headers; for no-till, guard doesn’t have a cross bar$12.25RSP187011 H218701Guard, 3-point, short-long-short, 4” no-till blunt point, double hardened John Deere 600 series flex headers; for no-till, guard doesn’t have a cross bar$12.25RSP134051 H213405 H229539Guard, 3-point, long-short-long, 4” long point, double hardened John Deere, 600 series rigid & draper; 900 series draper$13.30RSP135081 H213508 H229540Guard, 3-point, short-long-short, 4” long point, double hardened John Deere, 600 series rigid & draper; 900 series draper$13.30RSP187030 H218703Guard, 3-point, long-long-long, non-clog, 4” John Deere, 600 series rigid, flex and draper; 900 series draper Used in conditions where crop gets tangled; guard doesn’t have a cross bar$12.60rassPe guards800.368.7773CALL TOLL-FREE TO ORDER TODAY.72YOUR SMART-TILL PARTS SERVICE CENTERWe are now stocking replacement tines, bearings and other wear items for the HCC Smart-Till residue management tool.boule CrisTal sTrobe ligHTA High Quality, Unbreakable, Flexible & Rotating Strobe Light for Agricultural Equipment• Single voltage power supply• Flexible rubber base• Vibration proof and watertight• Unbreakable polycarbonate dome• Fast, clamp mounting• Worm gear drive• Metallized steel reflector with balance counterweight and stepped device for manual rotation• Radio interference filterBracket FBracket BBracket RUnbreakable & flexible rotating beaconProduct ID Description PriceLGT010000Boule Cristal light, bracket sold separately$79.95LGT020000 Mounting bracket, “B” style $9.95LGT020010 Mounting bracket, “F” style $9.95LGT020020 Mounting bracket, “R” style $9.95LGT029000 Halogen bulb $9.95HCC Smart-Till Replacement PartsProduct ID Description Notes PriceHCC202925 Bolt for Tine 2 required per tine $3.12HCC212500 Lock Nut for Tine 2 required per tine $1.07HCC226334 Heavy Duty Spindle & Hub Assembly $197.57HCC231250 Tine, Left Hand Carriage Casting Mark: LF/RR $24.95HCC231251 Tine, Right Hand Carriage Casting Mark: RF/LR $24.95HCC243750 Pillow Block Bearing $69.65HCC553001 Roller Thrust Plate $4.88HCC553237 C-Flex, 1” x 3”, 3-Hole For 2010 and newer models; beginning with serial number 310xxx $96.75HCC553238 Rock Guard $51.68HCC553239 Retainer for Rock Guard $16.76HCC853092 C-Flex, 1” x 3”, 4-Hole For 2009 and earlier models; serial number prior to 310xxx $119.12VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 73100% Stainless Steel Multi-Purpose Tools with 25 Year GuaranteeThe stainless steel Leatherman Tool stands alone above the crowd of multi-purpose tools on the market today. It is designed for the individual with an eye for quality, ingenuity and elegance. The Leatherman Tool is more than a well-designed cutlery item. It is the most practical, useful and compact multi-purpose tool yet created. Whether you are buying for yourself or as a gift for a farmer, fisherman, camper, hunter, hiker or other outdoors enthusiast, you can make no finer, more appropriate choice than the Leatherman Tool.WaveMicraFuseCharge XTiSurgeleaTHerMan ToolsTraCTor safeTy ligHTs• Designed to comply with Ohio’s lighting law• Breakaway extensions prevents damage to light bar and or tractor• Can be easily folded in for field operation and in close quarters• Adjustable width extensions that extend from 9-1/2’ up to 14’• Adjustable width universal mounting brackets that fit most tractors with minimal modifications• Powder coat paint finish• Draws only 4.7 AMPSUniversal Mounting Brackets IncludedProduct ID Description PriceLGT090000 Tractor safety light bar $357.00Super Tool 300THe PosTboxxUnique Design and Function - No Holes to DigThe Postboxx is the only patented and certified mailbox that is free standing using Sand or Gravel. Simply fill the pedestal with the desired ballast and you have an elegant mailbox that is safe and durable.Are You Tired of Having Your Mailbox Smashed?The Postboxx may possibly be the last mailbox you’ll ever buy. Made from high quality, sturdy, heavy impact polyethylene, this mailbox is able to withstand the toughest abuse. Sick of Looking at a Dingy, Unappealing Mailbox?The Postboxx is made to complement the beauty and charm of your home and comes in a variety of colors that never needs repainted. The Postboxx is made to withstand the elements and cleans easily, just wipe it or hose it off.Product ID Description PricePBX010000 Postboxx mailbox, black $89.99PBX020000 Postboxx mailbox, estate brown $89.99PBX030000 Postboxx mailbox, hunter green $89.99PBX040000 Postboxx mailbox, stone gray $89.99PBX050000 Postboxx mailbox, brick red $89.99PBX060000 Postboxx mailbox, white $89.99Leatherman ToolsProduct ID Description Price NotesLTH64010101 Micra Tool $20.00 Pocket size.LTH830024 Fuse with nylon sheath $40.00 Mid size.LTH831102 Super Tool 300 with leather sheath $75.00 Large tool.LTH830009 Charge Xti with leather sheath $80.00 Discontinued. Price reducedLTH830038 Wave with nylon sheath $90.00 Large tool.LTH830159 Surge with nylon sheath $100.00 Largest tool.800.368.7773CALL TOLL-FREE TO ORDER TODAY.74sCHuCK CusHion HiTCHesModel 750Model 750 RTModel RTRModel 320Model 340Model 720The Custom Hitch AdvantageSave time and effort on every hook-up, and that means saving money for you. It eliminates the frustrating job of backing into an exact position for hookup. The telescoping, swivel cushion tongue extends out a full (7) seven inches beyond the “Tow” position and swivels 60o laterally (or 12” left to right) for fast, easy hook-ups.Model 740Schuck 300 Series Hitches750 lbs tongue weight, 20,000 lbs. pulling capacityFor 1 or 2 axle trailers up to 10,000 lbs.Product ID Description PriceSHU103100 Model 310 cushion hitch. Weld on (not shown) $189.00SHU103200 Model 320 cushion hitch. Bolt on for 8-12” bolt pattern For factory bumpers with a flat mounting surface and all Schuck bumpers $208.00SHU103400 Model 340 cushion hitch. For 2” receiver tube, includes pin and clip Note: Hitch can be turned over for a 4” tongue height difference $208.00Schuck 700 Series Hitches1,000 lbs tongue weight, 40,000 lbs. pulling capacityRequires 12” from center of bumper mounting holes to spare tireProduct ID Description PriceSHU107100 Model 710 cushion hitch. Weld on (not shown) $251.00SHU107200 Model 720 cushion hitch. Bolt on for 8-12” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers $296.00SHU107402 Model 740 cushion hitch. For 2” receiver tube, includes pin and clip Note: There is a 2-1/2” drop from center of receiver tube to top of tongue.$296.00SHU107500 Model 750 cushion hitch with pullout swivel. Bolt on for 10-1/2” to 12” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers $498.00SHU107505Model 750RT cushion hitch with pullout swivel. For 2” receiver tube, includes pin and clip Note: There is a 5-1/2” drop from center of receiver tube to top of tongue. Tongue height should be 16-18” off the ground. Measure from center of receiver tube to ground and subtract the 5-1/2” drop.$498.00SHU107507Model 750RTR cushion hitch with pullout swivel. For 2” receiver tube, includes pin and clip Note: There is a 3-1/2” drop from center of receiver tube to top of tongue. Tongue height should be 16-18” off the ground. Measure from center of receiver tube to ground and subtract the 3-1/2” drop.$498.00sWifT HiTCHPORTABLE WIRELESS BACK-UP CAMERASwift HitchProduct ID Description PriceTPL100000 Swift Hitch, SH02 259.00NewProductQuickly hitch up any trailer, camper or snow plow with Swift Hitch:• Hi-Resolution Color Display• Camera with Magnetic Base • Water Resistant• Transmission Distance of 300 Feet• Night Vision Viewing Range of 15 Feet• Battery Run Time of 10 hoursVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 75Model 750AA Urethane Tips “Compress” to Absorb Minor ShocksB Urethane Cushions “Compress” to Absorb Major ShocksBThe Model 1000 Bumper is specifically designed for all pickup trucks. The 50,000 P.S.I. yield strength tubing makes this the strongest commercial bumper available. The bumper also requires a model specific mounting bracket, stone shield and a hitch to complete. Custom installation such as drilling holes or welding braces to frame may be required in some cases. Available in black only.sCHuCK CusHion HiTCHessCHuCK buMPerModel 8502” Receiver TubeCushion & BearingReplacement KitsSchuck BumperProduct ID Description PriceSHU001000 Model 1000 heavy duty bumper Must order mounting brackets, stone shield and hitch to complete$389.00Schuck 800 Series Hitches - For 2 Ton Trucks2,000 lbs tongue weight, 50,000 lbs. pulling capacityProduct ID Description PriceSHU108100 Model 810 cushion hitch. Weld on (not shown) $320.00SHU108200 Model 820 cushion hitch. Bolt on for 8-12” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers $399.00SHU108400 Model 840 cushion hitch. For 2” receiver tube, includes pin and clip $399.00SHU108500Model 850 cushion hitch with pullout swivel Bolt on for 12-15” bolt pattern, includes stiffening brackets For factory bumpers with a flat mounting surface and all Schuck bumpers Requires 13-1/2” from center of bumper mounting holes to spare tire$690.00Schuck Receiver TubeProduct ID Description PriceSHU100003 2” Receiver tube. For 8-12” bolt pattern, includes chain hooks and stiffening brackets $143.00Schuck Parts & AccessoriesProduct ID Description PriceSHU900300 300 Series replacement kit; 2 cushions, 3 bearings $47.00SHU900700 700 Series replacement kit; 4 cushions, 5 bearings $89.00SHU900800 800 Series replacement kit; 6 cushions, 7 bearings $117.00SHU900002 Cushion, 300, 700 series $14.00SHU900003 Bearing, 300, 700 series $7.00SHU900004 Cushion, 800 series $14.00SHU900005 Bearing, 800 series $7.00SHU900011 Replacement tongue, 300 series $48.00SHU900012 Replacement tongue, 700 series $63.00SHU900013 Replacement tongue, 800 series, one hole $103.00SHU900010 Replacement tongue, 800 series, two holes $113.00SHU900001 Stone shield, for Schuck bumper $58.00SHU900014 Stiffening brackets; 20” long $30.45Mounting brackets, for Schuck bumper; specify make, model and year $112.00Swivel Tongue for quick, easy hook-ups800.368.7773CALL TOLL-FREE TO ORDER TODAY.76ergo HiTCHEgroTech, LLC is excited to announce the release of Ergo-Hitch, the self-align-ing, automatically locking hitch that will change the way you think about towing. If you think you’ve seen similar hitches in the past…THINK AGAIN You’ve never seen anything like the Ergo-Hitch. Originally and specifically designed for SAFETY when hooking grain and hay wagons to your tractor or truck, the Ergo-Hitch will become the most versatile hitch system on the market. Simply back up to your wagon or trailer and “Click” you’re hooked. Pull the release lever and “Click” you’re unhooked, no pins or clips to mess with. The Ergo-Hitch is automatically locked in the open position until your next hook up. Again, no pins or clips to mess with. Use the Ergo-Hitch alone or with the “Big Mouth” vertical alignment ramps and the “Tongue Tender” wagon tongue lift attachment for maximum versatility and safety. Use with the “Drawbar Adapter” to connect your Ergo-Hitch to any tractor drawbar. Also, available is the specially engineered “Ergo Ball” for all Class I-IV ball hitch towing needs. Ergo-Hitch weighs less than 30 lbs. and is only 2” thick offering a sleek look as well as protection for the internal mechanics. Decep-tively strong for its size, the Ergo-Hitch is rated at 40,000 lbs. of pulling capacity and 2,000 lbs. of tongue weight.Self-Aligning and Automatically Locking Hitch with True Multi-Purpose Capabilities.• Heavy duty hinged handle helps prevent damage and injury from disengaged pins• Large metal collar prevents handle damage and fallout• Spring-loaded locking pin on top eliminates loss of hair pin from field trash• Large handle provides more leverage for easy removal• Heavy duty powder coating resists corrosion and increases visibility• Certified 1045 cold drawn steel and heat treatment provides greater strength & wearThe Safe and Easy SolutionProduct ID Description PriceLEP010001 Lockease hitch pin, 3/4” x 6” $21.75LEP010002 Lockease hitch pin, 7/8” x 6” $23.25LEP010003 Lockease hitch pin, 1” x 6” $25.50LEP010004 Lockease hitch pin, 1-1/8” x 7” $30.25LEP010005 Lockease hitch pin, 1-1/4” x 7” $32.00LEP010006 Lockease hitch pin, 1-1/2” x 8” $39.00LEP010008 Lockease hitch pin, 3/4” x 4-1/2” $19.50LEP010009 Lockease hitch pin, 7/8” x 4-1/2” $22.25LEP010010 Lockease hitch pin, 5/8” x 4-1/2” $18.50LEP080005 Lockease repair kit, includes thumb latch, spring & roll pin $6.50loCKease HiTCH PinErgo HitchProduct ID Description PriceERH125000Ergo Hitch, 2” Cushion Shank. For use with pins up to 1-1/4”. $299.00ERH610000Ergo Big Mouth, 7/8” Pin. Adds 4” of vertical alignment for easy hook up.$25.00ERH620000Ergo Big Mouth, 1-1/4” Pin. Adds 4” of vertical alignment for easy hook up.$25.00ERH710000Ergo Tongue Tender. Adjustable spring tension keeps tongue at correct height. $85.00ERH810000Ergo Drawbar Adapter. Connects Ergo Hitch to any drawbar.$65.00ERH515000 Ergo Double Ball, 2” and 2-5/16” $105.00VISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 7777MonTezuMa ToolboxesMontezuma Roller Cabinet & Top Chest ToolboxesTool storage so advanced you will feel as though you are working in the future.Montezuma created this cutting edge tool storage system by combining the flexibility of a drawer toolbox with the efficiency and organization of their patented tool organization. This tool storage system will make you faster, more efficient, and keep you organized all the while placing your most used tools at your fingertips and giving you instant tool inventory at a glance. This tool storage system organizes the more difficult to organize sockets and combination end wrenches allowing the drawers to be used for the general tool storage. With its unique tool organization it utilizes more of its capacity for tools and occupies less of your valuable shop or garage space. Montezuma’s quality now comes in roller cabinets and top chest toolboxes that are easily transported within your shop. They are equipped with full extension ball bearing drawer slides and a resilient powder coat paint finish. Montezuma roller cabinets and top chests have brushed aluminum drawer pulls and corner trim and coded lock and keys. The top chests include gas springs for easy opening. Montezuma 72” Elite 17-Drawer Roller Cabinet Toolbox72” wide x 30” deep x 46-1/4” high. Weighs 1,000 lbs.Product ID Vendor ID Description PriceCPL721700 BK7217MZ72” Elite 17-drawer roller cabinet toolbox, black$4,150.00CPL721703 BU7217MZ72” Elite 17-drawer roller cabinet toolbox, blue$4,150.00Montezuma 72” 13-Drawer Top Chest Toolbox71-1/2” wide x 29-1/2” deep x 23-1/8” high.Weighs 505 lbs.Product ID Vendor ID Description PriceCPL721300 BK7213CH72” 13-drawer top chest toolbox, black$2,250.00CPL721303 BU7213CH72” 13-drawer top chest toolbox, blue$2,250.00Montezuma 56” Top Chest & Roller Cabinet ToolboxProduct ID Vendor ID Description PriceCPL560700 BK5607CH56” 7-drawer top chest toolbox, black$795.00CPL561100 BK5611TC56” 11-drawer roller cabinet toolbox, black$1,195.00Montezuma 41” Top Chest & Roller Cabinet ToolboxProduct ID Vendor ID Description PriceCPL410800 BK4108CH41” 8-drawer top chest toolbox, black$545.00CPL411100 BK4111TC41” 11-drawer roller cabinet toolbox, black$830.00Montezuma 36” Top Chest & Roller Cabinet ToolboxProduct ID Vendor ID Description PriceCPL360800 BK3608CH 36” 8-drawer top chest, black $510.00CPL360610 BK3606TC36” 6-drawer roller cabinet, black$740.00Montezuma 26” Top Chest & Roller Cabinet ToolboxProduct ID Vendor ID Description PriceCPL260400 BK2604CH 26” 4-drawer top chest, black $375.00CPL260600 BK2606TC26” 6-drawer roller cabinet, black$595.00Note: The 36” and 26” roller cabinets can also be used with the portable toolboxes on pages 78-79. 800.368.7773CALL TOLL-FREE TO ORDER TODAY.78MonTezuMa ToolboxesMontezuma Portable Steel Toolbox36” wide x 17-3/8” deep x 21-1/2” high. Weighs 91 lbs.Product ID Vendor ID Description PriceCPL364500 XL450B Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, black $495.00CPL364501 XL450R Portable steel toolbox, 36” x 17-3/8” x 21-1/2”, red $495.00Montezuma Portable Steel Toolbox30” wide x 19” deep x 20-1/8” high. Weighs 89 lbs.Product ID Vendor ID Description PriceCPL003100 LA400B Portable steel toolbox, 30” x 19” x 20-1/8”, black $475.00CPL003101 LA400R Portable steel toolbox, 30” x 19” x 20-1/8”, red $475.00CPL003102 LA400W Portable steel toolbox, 30” x 19” x 20-1/8”, white $475.00Montezuma Portable Aluminum Toolbox30” wide x 15” deep x 18-1/8” high. Weighs 51 lbs.Product ID Vendor ID Description PriceCPL002203 ME300AL Portable aluminum toolbox, 30” x 15” x 18-1/8”, brite $450.00CPL002204 ME300ALB Portable aluminum toolbox, 30” x 15” x 18-1/8”, black $450.00CPL002205 ME300ALR Portable aluminum toolbox, 30” x 15” x 18-1/8”, red $450.00CPL002206 ME300ALW Portable aluminum toolbox, 30” x 15” x 18-1/8”, white $450.00Limited 5-Year WarrantyAll Montezuma toolboxes have a  Limited 5-Year Warranty  to the original user against defects in workmanship and material under normal use. This Limited 5-Year Warranty does not apply to products that have been misused, abused, damaged by accident or otherwise, subjected to abnormal use, used in any type of over the road use, or modified by anyone other than Montezuma Mfg., Inc.  During the applicable duration of the warranty, at its option  Montezuma Mfg., Inc.  will repair or replace its products which fail to give satisfactory performance due to defective workmanship or materials, or provide a refund by repaying or crediting with an amount equal to the purchase price of such products.Note: The 36” and 26” portable toolboxes can also be used with the roller cabinets on page 77.FEATURES:• 16 gauge steel or .100” thick tread aluminum construction• Welded seams, no spot welding• Holds metric and/or S.A.E. tools• Lid secures tools in position when closed• Gas spring raises lid when unlatched for easy tool access• Weather stripping creates a tight seal against dust and moisture• Chrome plated side handles on both sides of chest• Locking latch secures tools from unauthorized use• Lock cylinder has double-cut keys for easier locking and unlocking• Powder coated with a tough, scratch resistance, textured, powder paint• Full width wrap around aluminum drawer pull• Premium drawer liner• Tool inventory at a glanceVISIT OUR WEBSITE FOR THE MOST CURRENT PRODUCT PRICINGwww.sidist.com 7979Montezuma Portable Steel Toolbox30” wide x 15” deep x 18-1/8” high. Weighs 65 lbs.Product ID Vendor ID Description PriceCPL002200 ME300B Portable steel toolbox, 30” x 15” x 18-1/8”, black $375.00CPL002201 ME300R Portable steel toolbox, 30” x 15” x 18-1/8”, red $375.00CPL002202 ME300W Portable steel toolbox, 30” x 15” x 18-1/8”, white $375.00Montezuma Portable Steel Toolbox26” wide x 17-3/8” deep x 21-1/2” high. Weighs 73 lbs.Product ID Vendor ID Description PriceCPL263500 IM350B Portable steel toolbox, 26” x 17-3/8” x 21-1/2”, black $495.00CPL263501 IM350R Portable steel toolbox, 26” x 17-3/8” x 21-1/2”, red $495.00Montezuma Portable Aluminum Toolbox26” wide x 17-3/8” deep x 18-1/8” high. Weighs 53 lbs.Product ID Vendor ID Description PriceCPL262503 SE250AL Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, brite $495.00CPL262504 SE250ALB Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, black $525.00CPL262505 SE250ALR Portable aluminum toolbox, 26” x 17-3/8” x 18-1/8”, red $525.00Montezuma Portable Steel Toolbox26” wide x 17-3/8” deep x 18-1/8” high. Weighs 64 lbs.Product ID Vendor ID Description PriceCPL262500 SE250B Portable steel toolbox, 26” x 17-3/8” x 18-1/8”, black $435.00CPL262501 SE250R Portable steel toolbox, 26” x 17-3/8” x 18-1/8”, red $435.00Montezuma Portable Steel Toolbox22-1/2” wide x 13” deep x 14-1/8” high. Weighs 43 lbs.Product ID Vendor ID Description PriceCPL001200 SM200B Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, black $295.00CPL001201 SM200R Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, red $295.00CPL001202 SM200W Portable steel toolbox, 22-1/2” x 13” x 14-1/8”, white $295.00Note: The 36” and 26” portable toolboxes can also be used with the roller cabinets on page 77.MonTezuMa Toolboxes800.368.7773CALL TOLL-FREE TO ORDER TODAY.80sHoW sCHeduleJanuary 7-9, 2014Keystone Farm ShowYork, PennsylvaniaBooth 420-422January 14-16, 2014Fort Wayne Farm ShowFort Wayne, IndianaBooth 760-766January 19-21, 2014Quad Cities Farm Equipment ShowRock Island, IllinoisBooth 701-703January 24-26, 2014Power Show OhioColumbus, OhioBooth 012, Bricker BuildingJanuary 28-30, 2014Iowa Power Farming ShowDes Moines, IowaBooth 1241January 29-30, 2014Midwest Ag Expo-IllinoisGordyville USA, Gifford, IllinoisBooth 225February 5-7, 2014Southern Farm ShowRaleigh, North CarolinaBooth 3305February 12-15, 2014National Farm & Machinery ShowLouisville, KentuckyBooth 8004, PavilionFebruary 28 – March 1, 2014Mid-South Farm & Gin SupplyMemphis, TennesseeBooth 919-921March 4-6, 2014Hawkeye Farm ShowCedar Falls, IowaBooth 408-412March 12-13, 2014Triumph of Ag ExpoOmaha, NebraskaBooth 631-633March 25-27, 2014WPS Farm ShowOshkosh, WisconsinBooth D6538-D6541April 3-5, 2014Southern Plains Farm ShowOklahoma City, OklahomaBooth AB515July 10-12, 2014WKMA 3i ShowDodge City, KansasLot I-62, I-64, I-66July 18-20, 2014Four State Farm ShowPittsburg, KansasLot 425-426July 22-24, 2014Michigan Ag ExpoEast Lansing, MichiganLot 521August 5-7, 2014Farm FestRedwood Falls, MinnesotaLot 214August 5-7, 2014Empire Farm DaysSeneca Falls, New YorkLot 709, West Time Saver Ave.August 12-14, 2014Wisconsin Farm Technology DaysBarron County, WisconsinLot 648August 12-14, 2014Ag ProgressRock Springs, PennsylvaniaWest 2nd StreetAugust 19-21, 2014DakotafestMitchell, South DakotaLot 532August 26-28, 2014Farm Progress ShowBoone, IALot 857September 6-14, 2014Clay County FairSpencer, Iowa7th Avenue & 2nd StreetSeptember 9-11, 2014Big Iron Farm Show & ExpoWest Fargo, North DakotaBooth A32-A34, Ag BuildingSeptember 9-11, 2014Husker Harvest DaysGrand Island, NebraskaLot 354September 16-18, 2014Farm Science ReviewColumbus, OhioLot 581December 2-4, 2014Greater Peoria Farm ShowPeoria, IllinoisBooth H0827-H0831December 9-11, 2014Nebraska Power Farming ShowLincoln, NebraskaBooth 1430December 16-18, 2014Indiana-Illinois Farm Equip. ShowIndianapolis, IndianaBooth 203, 204, 204A13540 Spencerville RoadSpencerville, Ohio800-368-7773www.sidist.com