Sieve grain Cleaner- separator and grader

DEALER asince 1956agro-industryPSC CLEANERsince 1956©2013 ZANIN F.LLI - All contents (text, photos, graphic) present in this brochure are propriety of the ZANIN F.LLI company and are protected by the current law. The brochure cannot be published, reproduced, rewritten, distributed, and commercializedwithout explicit authorization. Brands, denominations and the mentioned companiesinside of this brochure are propriety of respective proprietors and are protected by the current law in matter of brands, patents and / or copyright.The company Zanin F.lli disclaims any liability for any inaccuracies in this depliant and reserves the right to make changes to the product as it deems appropriate at any time and without notice.WARNING: INFORMATION IS NOT BINDING, PLEASE REFER TO THE TECHNICAL DOCUMENTATION RELEASED DIRECTLY BY ZANIN F.LLIZANIN F.lli s.r.l.Viale delle Industrie, 131032 Casale sul Sile (TV) - ItalyP. +39 0422 785444F. +39 0422 785805www.zanin-italia.cominfo@zanin-italia.comSIEVE CLEANER PSCEXITMeoloDirectionRAVENNAEXITQuartod’AltinoEXITPreganziolEXITMoglianoVenetoMestre passer - byMoglianoVenetoRoncadePreganziolMargheraCasalesul SileS. CiprianoDirectionTRIESTEDirectionCORTINADirectionTREVISODirectionMILANOMestreMarco Polo AirportTreviso AirportVeneziaQuarto d’AltinoDoloROMA02010413 34414522603PSC CLEANERThe sieve cleaner allows to separate fine, medium and large impurities present in the product or calibrate with a double-pass system.LAYOUT:- Pressed and bolted support frame for large cases.- Fairing on pressed galvanized sheets.- Product hopper entry.- Carbon steel sieves cases.- Dust suction plug with vertical positioning.- Manual lock gate for air flow control.- Carbon steel sieve cases (frame and frameholder) with cautschuk balls.- Sieve movements through connecting rod1 Product with impurities inlet2 Air inlet3 Heavy rejects outlet4 Light rejects outlet41 Fine impurities outlet, optional5 Clean product outlet6 Air with dustMODEL PSC 10 PSC 15*Precleaning capacity - t/h 40 60*Cleaning capacity - t/h 20 30*Calibrating capacity - t/h 6 8Sieve surface - m2 6 9Sieve motor power - kW 2,2 2,2Fan power - kW 4 7,5Lenght - mm 3600 3650Width - mm 1620 2150Height - mm 2255 2255Empty weight - kg 1088 1400* capacity with wheat s.w. 0.78 – rel. moisture 14% - 2% impuritiesOPERATION:Psc double pass cleaning system.The product enters by way of gravity into a balance distributor with counterweights and is uniformly spread over the entire width. Subsequently it descends as an even curtain and encounters a cross air flow which removes the lighter parts (decanted by a cyclone or filter), and deposits part of the dust and heavier impurities in the decantation hopper, equipped with a reject discharge auger. The product, now clean from dust, enters the first case with two levels of perforated sieves. These separate the product according to the perforation size. The product proceeds to the second case with two levels of perforated sieves. Again the product is separated according to the perforations. As it exits, the desired product is evenly spread over the entire width of the plane, and as it descends in a thin curtain it again encounters a cross air flow. This removes any remaining dust and impurities still present within the product. The cleaning and calibration system allows the separation of 7 types of waste and by-products.OPTIONAL:- Motorized roller distributor- Motorized lock gates for air flow control- Variable speed electric fan- Antiwear sheet- Switch board- Vertical hopper for large impurities- Inclined hopper for large impurities- Collecting sector for by-products- Support frame- Bag placer01 - Sieve moving rod02 - Sieve changing03, 04 - Installation examplesWarning: information is not binding, please refer to the technical documentation released directly by Zanin F.lli