Slow continuous cooler

aDEALERsince 1956Agro-industrySLOW COOLER DRY SERIESsince 1956ZANIN F.lli s.r.l.Viale delle Industrie, 131032 Casale sul Sile (TV) - ItalyP. +39 0422 785444F. +39 0422 785805www.zanin-italia.cominfo@zanin-italia.com©2013 ZANIN F.LLI - All contents (text, photos, graphic) present in this brochure are propriety of the ZANIN F.LLI company and are protected by the current law. The brochure cannot be published, reproduced, rewritten, distributed, and commercializedwithout explicit authorization. Brands, denominations and the mentioned companiesinside of this brochure are propriety of respective proprietors and are protected by the current law in matter of brands, patents and / or copyright.The company Zanin F.lli disclaims any liability for any inaccuracies in this depliant and reserves the right to make changes to the product as it deems appropriate at any time and without notice.WARNING: INFORMATION IS NOT BINDING, PLEASE REFER TO THE TECHNICAL DOCUMENTATION RELEASED DIRECTLY BY ZANIN F.LLIa) Didascaliab) Didascalia0201 0306040705since 1956SLOW COOLER DRY SERIESZanin F.lli has been designing and building coolers for all types of dryers forover 40 years. This cooling process increases the efficiency and production of the dryer whilst reducing fuel consumption by 30% compared to traditional dryers. The post-drying process relies on the exploitation of the energy contained within the grain (in the form of heat), and through tempering the remaining moisture is removed without the need for fuel. Slow cooling helps avoid split product caused by thermic shock (abrupt change in temperature), and leaves stored product healthy and with a stable moisture level.In the circular slow cooler the product enters by gravity into a cylindrical container. Once loaded it follows the discharge process of the dryer (equal quantities enter and exit), constantly regulated by a system of sensors. As it descends the grain is invested by a counter-current of cold air, from the bottom upwards.Total discharge across the entire surface is fundamental to obtaining homogeneity of the exiting product. The quantity of grain discharged is predetermined and regulatedby a pneumatic extractor, subsequently the product is collected in multiple hoppers and channelled to a discharge conveyor.OPERATION:MODEL DIAMETER [m] HEIGHT [m] CAPACITY [m3]RLC 4 / 120 4,55 10 121RLC 4 / 165 4,55 13 162RLC 6 / 230 6,37 13 227RLC 6 / 320 6,37 16 322RLC 6 / 420 6,37 19 418RLC 9 / 380 9,1 13 382RLC 9 / 480 9,1 14,5 480RLC 9 / 580 9,1 16 577RLC 9 / 770 9,1 19 772RLC 9 / 965 9,1 22 967A B CB CoolerA Dryer C NoSupplied data have a tolerance of +/- and have been calculatedunder the following conditions:- ready and cleaned seeds, dried by 24h- Dryer supplied with natural gasPlease consult in every case technical scheme.N.B.The company declines all responsibility for any inaccuracies in this brochure,reserving the right to make any modifications to their product asthey feel appropriate.LESS- Fuel consumption- Energy consumption- Split productMORE- Protein value- Specific weight- Healthy product- Excellent preservation in storage- Great for product with high humidity30 - 35%. Removes 3-4% RH withoutfuel- Great for product with low humidity20-25%. Stabilizes and coolsthe product slowly01 - Example of installation02 - Example of installation03 - Example of installation04 - Insulation05 - Pneumatic control panel06 - Floor Ventilation07 - Pneumatic extraction group