Smooth Forest Machine Brochure

PRODUCT INFORMATION The WheelHorse PRODUCT INFORMATION The WheelHorse - The versatile forest machine Have You missed a machine for small scale forest work that are developed for accessibility, capacity and usability? We are extremely pleased to be able to present a revolutionary concept that involves an articulated “thinning forwarder” that you can both go on and manage by the joystick you know from IronHorse. We have used well-tried technology solutions from Iron Horse and combined this with the need for a new “thinning forwader” to the small-scale forestry. Just as the Iron Horse The Wheel Horse is a complete system for forest, farm and transport in different terrain. Flexibility, strength, and low ground pressure makes it an environmentally friendly alternative to heavier machines. The machine is easy to operate and easy to get started and work with. In comparison to the many ATV vehicles with trailers, this product is fully developed for practical use in the forest and at the same time, it has properties that allow it to quickly run slightly longer distances, due to its high speed gear. MACHINE – THE WHEELHORSE WheelHorse incl. 1,5 tons trailer and radicontrolled crane with wire Part No. 968 7450-20 The WheelHorse is equipped with the reliable Honda engine of 13 Hp The vehicle is unique with its mechanical transmission and high- and low gear. The hydraulic engagement on the trailer is easy to control from the steering handle and the machine has 6 wheel traction, when there are need extra power for pulling. Dim (mm) w x h x I Max load capacity Transmission Hydraulic Total weight incl. trailer Engine Traction trailer Max speed Support legs Length wire 1300x1990x4650 (*incl rollover bar) 1500 Kg Variator/gearbox/Chain transmison Double pump 1,9/3,8 cm3 1000 Kg Honda air Cold 4-stroke OHV Hydraulic transmission 15/6 km/h (gear high/low) Mechanical 25 m WheelHorse with T1700 4WD crane with grip 330 Part. No. 968 7450-10 The WheelHorse is equipped with the reliable Honda engine of 13 Hp The vehicle is unique with its mechanical transmission and high- and low gear. The hydraulic engagement on the trailer is easy to control from the steering handle and the machine has 6 wheel traction, when there are need extra power for pulling. The trailer is equipped with a powerful grip that have a big lift capacity comparing to it size. Dim (mm) w x h x I Max load capacity Transmission Hydraulic Total weight incl. trailer Engine Traction trailer Max speed Cranes reach/lifting capacity Support legs 1300x1990x4650 (*incl rollover bar) 1500 Kg Variator/gearbox/Chain transmison Double pump 1,9/3,8 cm3 1000 Kg Honda air Cold 4-stroke OHV Hydraulic transmission 15/6 km/h (gear high/low) 3,3 m/150kg 1,2 350 Kg Hydraulic Length 25 m WheelHorse with T1750 4WD crane with grip 30-50 Part. No. 968 7450-30 The WheelHorse is equipped with the reliable Honda engine of 13 Hp The vehicle is unique with its mechanical transmission and high- and low gear. The hydraulic engagement on the trailer is easy to control from the steering handle and the machine has 6 wheel traction, when there are need extra power for pulling. The trailer is equipped with a powerful grip that have a big lift capacity comparing to it size. Max load capacity 2000 Kg Traction trailer Hydraulic transmission Cranes reach/lifting capacity 3,5 m/240 Kg 1,2 600 Kg Support legs Hydraulik Crane 30-60 Extensionsbar 90 cm Cranes reach/lifting capacity 4,4 m/160 Kg ACCESSORIES WHEELHORSE Dredger bucket DS55 Part. No. 531 0135-84 Dredger bucket is an accessory for the WheelHorse crane to be attached where the grip is mounted. It’s perfect to have when cleaning the ditches or other areas combined with the dumper trailer. Also good to use when transporting soil, gravel or stones. Volume is 60 liter. Dumper trailer FL250V Part. No. 531 0170-05 FL250V dumper trailer is adapted for tough handling, 3 mm thick plate in the lower part and reinforced side flaps. It’s equipped with double rear folded flaps. You can transport soil, gravel, stones and equipment even people easily. The total trailer is galvanized for optimal long life span. Length: Total height flaps: Width: 225 cm 50 cm 122 cm Bracket for Gasoline can 10L Part. No. 531 0170-14 Practical bracket for gasoline can. Hydraulic winch, radio controlled Part no. 531 0170-00 RC Hydraulic winch HV500 is a reliable and proven construction. The winch kit is complete with also radio controlled box, wire, hock, hoses, and electrical controlled hydraulic valve. Weight Speed Oil pressure Maximum pull strength Rec. Oil flow Radio controlled Wire/thickness Range RC Wire length 11 Kg 30 m/min 190 bar 500 Kg 10-15 l/min 2 channels 5 mm Ca 50 m 25 m Snow chains Part No. 531 0170-12 With the snow chains attached on the front wheels, You get the protection for preventing to slip. Meassure 10.0/75-15,3 Snow blade Part No. 531 0170-20 Snow blade incl. the attachment rig is adapted to the WheelHorse and is easily mounted onto the machine. The attachment rig will be permanente attached to the machine, and when You need the blade You easily attaché the blade to the rig easily with 2 pins. It’s the same easy procedure when You are disconnecting the blade from the machine. Width Height 182 cm 52 cm Working lights LED 10-80V Part No. 531 0151-38 LED lights are low power and have high tolerate of vibration and gives an terrific light. Every LED has it’s own reflektion sektor. Winch for snowblade Part No. 531 0170-21 WARN RT25 winch has a well-tested technic, high quality and modern engine which gives it a long life span with low power consumption. Top speed is 15 km/h, on high gear Lennartsfors AB Dealer Lennartsfors 1 S-672 92 ÅRJÄNG Tel. +46 (0)573-39200 Sweden Website www.lennartsfors.com