Straw Processing Tecnologies - Brochure

Data Sheet Straw shredder RBS 260 december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_RBS 260_2013_UK.doc Picture Machine function Shredding straw from big bales, round bales etc, into a fragmen-tation of approx 80 mm in average and metering the material for a hammer mill, by first feeding the material into a stone trap at the end of a auger. Machine number 1310-003, Type: RBS 260 Machine paint Machines, guards etc. comes in a color type RAL 3001 red suitable for indoor, non corrosive environment - water and oil resistant -15 to + 60 degrees C, surface purified with alkaline degreaser, painted with a machine primer and here after coating paint. Custom tariff number 84369900 Standard DS/EN 60204-1:2006 Safety of Machinery - Electrical Equip-ment of Machines, DS/EN ISO 13850 of January 29th 2007 emergency stop, DS/EN ISO 13849-1 safety-related parts of control systems, DS/EN 60204-1: 2006, cable installation method E Power consumption kW 30 kW main motor 2,2 kW tub 2,2 kW auger Measures Height: 2200 + 700, Width: 2700 Weight 1800 Kg. Data Sheet Straw shredder RBS 260 december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_RBS 260_2013_UK.doc RISK ASSESMENT Machine: This machine cannot work as a “Stand Alone”, and can therefore not be delivered with a CE marking. Analyzed risk following EN-ISO 13849-1: S F P PLr 1. Mounting: The machine is provided lifting positions that ensures balance when lifting and strong enough to hold machine load. Follow instruction from the manual, when mounting the machine. Work place assessment should be made, before start with mounting. S2 F1 P1 c 2. Operating: a. In automatic: The machine has to be mounted with a filling device, that provides cover for accidental entering into the machine like Cormall BT 170 straw bale table or similar, and with a closed connected outtake on the auger outtake of the machine, such as cormall stone trap with HDH 770 straw mill, auger or similar device. S2 F1 P1 c b. In manual with front loader: The machine must be on same floor level as the loader is driving at, to prevent accidental en-tering of the machine. S2 F1 P1 c 3. Servicing: a. All lubrication positions are from a safe position. S1 F1 P1 a b. In case of a blocking under the knife rotor, is provided access between the rotor and the conveying auger, through a service door, this door has to be removed by tools and is bolted with safety mothers. Before opening the machine must be turned off on the main switch and locked. S2 F1 P1 c 4. Renovation: a. Change of knifes inside the machine can happen 2-3 times a year. To change knifes one has to go into the machine. Or use the same door as described under 3b. Access into the machine is provided through filling opening in the top of the machine Before entering the machine must be turned off on the main switch and locked. The filling device must also be turned off. Work place assessment should be made. S2 F1 P1 c 5. Scrapping/recycling: same comment as under 1. Mounting S2 F1 P1 c Data Sheet Straw shredder RBS 260 december 6, 2013 I:\\1-Dok\\Salg\\Maskindata\\WWW\\DS_RBS 260_2013_UK.doc