Straw Spreaders- Brochure

HYDRAULIC DRIVENHYDRAULIC DRIVENFRONT-LOADING STRAW SPREADERSFRONT-LOADING STRAW SPREADERSWhere is a traditionknow-howWhere is a traditionknow-howOur options16 874532Front-loading straw spreader for loaders/telehandlers (rotating chute)Chute adjustable over a 300° rotation; for even straw spreadingup to 50 ft (15 m).(depending on oil ?ow)Our hydraulic-drive front-loading straw spreader for loaders/telehandlers has often been copied but has never been equaled. Thanks to many years of experience since it ?rst reached the market in 1998, it gives users not only the outstanding quality and reliability of ROBERT-madeequipment, but also totalsatisfaction of a remarkablevisibility, ease of handling and accessibility, no matter what the brand of telescoping arm or type of bale you're using.Double hydraulic drive on thedistributor drum (2 hydraulic motors) for greater bale separationpower.Electric control for remoteadjustment of the apron speed.Gradually controlled through a module in the cab.StandardEquipmente45168723STRAW SPREADERSTHE REFERENCE FOR A QUALITY COVERINGFront-loading straw spreader for loaders/telehandlers (side chute)Three-piece chute for even straw spreadingup to 60 ft (18 m). (depending on oil ?ow)- An even amount of straw over the whole spreadingarea and stalls, without affecting the performance of the straw.1 – High-torque hydraulic motor, specially designed to power the turbine through a chain drive, fed by the available oil ?ow delivered from loaders/telehandlers.2 – Quiet air turbine delivering animpressive amount of air, allowingstraw to be spread over distancesof up to 60 ft (18m). With ?y-wheel and 8 bolt-on blades.3 – Hydraulic-driven bale distributor specially designed for consistent supply to the turbine, and apron consisting of 2 ?at 12-mm chains connected with extremely resistant bars in the shape of a closed U.4 – Variable-speed hydraulic motorwith an oil ?lled transfer case, driving the apron in both directions. The 2 drives are located so that the machines stay narrow.5 – Quick and easy tension adjust-ment of the apron easily accessible from outside the chassis.6 – Windows-equipped splash guardthat automatically self-adjusts to theheight of the bales.7 – Side screens bolted to the chassis prevent over?owing for clean operation.8 – Bolted coupling system allows offsetting the machine and transferring it later to another typeof loader without making any modi?cations.9 – Electrical module that controls all the functions of the machine. Mounted inside the cab at the operator's ?ngertips for maximum operating comfort.Special double hydraulic driven bale distributor drum (suitable for spreading straw in stallsor poultry barns).Adjustable straw chute, 30° forward and 30° backward (GL model), allowing spreading distancesof more than 50 ft (15 m). For straw coverage in the hard to reach pens.Automatically controlled bale distributor drum. Avoids damaging overloads of hydraulic components: Whenever maximum load has been reached, the system reverses the rotation of the bale distributor drum and the apron for a preset period of time. Once the system has cleared, both components automatically revert to their normal rotation.NEWNEWOur options16 87453210Front-loading straw spreaderfor loaders/telehandlers (rotating chute)Chute adjustable over a 300° rotation; for even straw spreading up to 50 ft (15 m). (depending on oil ?ow)Featuring the same mechanical and hydraulic components as the standard model, the compact version, with its loading gate controlled by 2 cylinders and its narrow design, is particularly well-suited for applications where maneuveringspace is limited.Can also be used with all makes of loaders/telehandlers andall types of bales.Double drive of the bale distributor drum (2 hydraulic motors) for greater bale separator power.Electric controlfor remote adjustment of the apron speed. Gradually controlled through a module in the cab.Special double hydraulic driven bale distributor drum (suitable for spreading straw in stalls or poultry barns).ldee4516872310Front-loading straw spreader for loaders/telehandlers (side chute)Three-piece chute for even straw spreadingup to 60 ft (18 m). (depending on oil ?ow)STRAW SPREADERSTHE REFERENCE FOR A QUALITY COVERING- An even amount of straw over the whole spreadingarea and stalls, without affecting the performance of the straw.StandardEquipment1 – High-torque hydraulic motor, specially designed to power the turbine through a chain drive, fed by the available oil ?ow delivered from loaders/telehandlers.2 – Quiet air turbine delivering animpressive amount of air, allowingstraw to be spread over distancesof up to 60 ft (18m). With ?y-wheel and 8 bolt-on blades.3 – Hydraulic-driven bale distributor specially designed for consistent supply to the turbine, and apron consisting of 2 ?at 12-mm chains connected with extremely resistant bars in the shape of a closed U.4 – Variable-speed hydraulic motorwith an oil ?lled transfer case, driving the apron in both directions. The 2 drives are located so that the machines stay narrow.5 – Quick and easy tension adjust-ment of the apron easily accessible from outside the chassis.6 – Windows-equipped splash guardthat automatically self-adjusts to theheight of the bales.7 – Side screens bolted to the chassis prevent over?owing for clean operation.8 – Bolted coupling system allows offsetting the machine and transferring it later to another typeof loader without making any modi?cations.9 – Electrical module that controls all the functions of the machine. Mounted inside the cab at the operator's ?ngertips for maximum operating comfort.10 – The loading gate with 2 hydraulic cylinders is specially shaped for loading round or squarebales. A retaining chain contains the last layer of the bale.Adjustable straw chute, 30° forward and 30° backward (GL model), allowing spreading distancesof more than 50 ft (15 m). For straw coverage in the hard to reach pens.Automatically controlled bale distributor drum. Avoids damaging overloads of hydraulic components: Whenever maximum load has been reached, the system reverses the rotation of the bale distributor drum and the apron for a preset period of time. Once the system has cleared, both components automatically revert to their normal rotation.NEWNEWThe loading gate is double acting; electro-hydraulic controlled, to allow round bales to be loaded more easily.Our options16 87453210Front-loading straw spreaderfor mini-loaders (rotating chute)Chute adjustable over a 300° rotation; for even straw spreading up to 50 ft (15 m). (depending on oil ?ow)As we developed the Hydropail standard and compact spreaders for loaders/telehandlers, we also developed the smaller and lighter “Hydropail 2” straw spreader for small articulating and compact loaders with insuf?cient power to operate large spreaders.Left-hand side chute for the GL model.Adjustable straw chute, 30° forward and 30° backward (GL model), allowing spreading distancesof more than 50 ft (15 m). For straw coverage in the hard to reach pens.Double hydraulic drive on thedistributor drum (2 hydraulic motors) for greater bale separationpower.4516 872310Front-loading straw spreader for mini-loaders (side chute)Electric-controlled chute for precise straw spreading up to 60 ft (18 m) (depending on oil ?ow).Right-hand side chute (left-hand optional).STRAW SPREADERSTHE REFERENCE FOR A QUALITY COVERING- An even amount of straw over the whole spreadingarea and stalls, without affecting the performance of the straw.StandardEquipment1 – High-torque hydraulic motor, specially designed to power the turbine through a chain drive, fed by the available oil ?ow delivered from loaders/telehandlers.2 – Quiet air turbine delivering animpressive amount of air, allowingstraw to be spread over distancesof up to 60 ft (18m). With ?y-wheel and 8 bolt-on blades.3 – Hydraulic-driven bale distributor specially designed for consistent supply to the turbine, and apron consisting of 2 ?at 12-mm chains connected with extremely resistant bars in the shape of a closed U.4 – Variable-speed hydraulic motorwith an oil ?lled transfer case, driving the apron in both directions. The 2 drives are located so that the machines stay narrow.5 – Quick and easy tension adjust-ment of the apron easily accessible from outside the chassis.6 – Windows-equipped splash guardthat automatically self-adjusts to theheight of the bales.7 – Side screens bolted to the chassis prevent over?owing for clean operation.8 – Bolted coupling system allows offsetting the machine and transferring it later to another typeof loader without making any modi?cations.9 – Electrical module that controls all the functions of the machine. Mounted inside the cab at the operator's ?ngertips for maximum operating comfort.10 – Hand-operated loading gate is secured by 2 adjustable chains. Specially shaped for loading round or square bales. A retaining chain contains the last layer of the bale.Electric control for remoteadjustment of the apron speed.Gradually controlled through a module inthe cab.Automatically controlled bale distributor drum. Avoids damaging overloads of hydraulic components: Whenever maximum load has been reached, the system reverses the rotation of the bale distributor drum and the apron for a preset period of time. Once the system has cleared, both components automatically revert to their normal rotation.NEWNEWThe loading gate is double acting; electro-hydraulic controlled, to allow round bales to be loaded more easily.Loading gate with 2 hydraulic cylinders controlled from the cab.Folder HYDROPAIL:Mise en page 1 7/05/12 14:19 Page 8Insidedimensions ft. (m)Overall dimensions ft. (m) (loadinggate closed)Overall width (open chute)Bale sizes Round m (ft.)widthwidthlengthlengthheightheightSquareSpreading distance ft. (m)Optimal oil ?ow rate in gpm (L/min)Min. required oil pressure in psi (bar)Empty operating weight in lbs (kg)What is our vision?Since 1970, we've devoted our skills to the service of farming by contributing to the well-being of the people who practice it. Through surveys, statements and comments that came directly from users of our products, we design, manufacture and assemble our machines ourselves. Many years of ongoing development guarantee high-quality products that farmers have grown to trust.A family business, the Robert Company will proudly do everything they can to customize their equipment to your unique needs.MANUFACTURERS20E REPPE ST. - INDUSTRIAL SECTIONB-5300 SEILLESTEL.: +32 (0)85 84 96 70 – FAX: +32 (0)85 84 96 71www.atelier-robert.be – info@atelier-robert.beIn the interest of ongoing product improvement, we reserve the right to modify without notice the characteristics of the products described herein.GERMANYNETHERLANDSBELGIUM4'5”(1.35)10'6”(3.20)2'11”(0.90)6'11”(2.10) 6'11”(2.10)13'1”(4.00)5'5”(1.65) 5'5”(1.65) 5'5”(1.65)8'2”(2.50) 8'2”(2.50) 7'3”(2.20)Ø5'11”(1.80) Max Ø5'11”(1.80) Max Ø5'11”(1.80) Max Ø5'11”(1.80) Max Ø5'3”(1.60) Max Ø5'3”(1.60) Max4'x4'x8'(1.20x1.20x2.50)4'x4'x8'(1.20x1.20x2.50)4'x4'x8'(1.20x1.20x2.50)4'x4'x8'(1.20x1.20x2.50)4'x3'x6'7"(1.20x0.90x2.00)4'x3'x6'7"(1.20x0.90x2.00)60' (18) 50' (15) 50' (15)60' (18) 60' (18) 50' (15)22 (80) 22 (80) 22 (80) 22 (80) 15 (50) 15 (50)3,190 (220) 3,190 (220) 3,190 (220) 3,190 (220) 2,900 (200) 2,900 (200)3,792 (1,720) 3,858 (1,750) 3,682 (1,670) 3,747 (1,700) 2,381 (1,080) 2,447 (1,110)4'5”(1.35) 4'5”(1.35) 4'5”(1.35) 4'5”(1.35) 4'5”(1.35)10'6”(3.20)2'11”(0.90) 2'11”(0.90) 2'11”(0.90)5'7”(1.70) 5'7”(1.70) 5'11”(1.80) 5'3”(1.60)13'1”(4.00) 8'6”(2.60) 9'10”(3.00)7'11”(2.40) 7'11”(2.40) 7'7”(2.30)/ / /4'11”(1.50) 4'11”(1.50) 6'3”(1.90) 6'3”(1.90)3'3”(1.00) 3'3”(1.00)8'6”(2.60) 9'10”(3.00)