Sugar-Beet Harvester Brochure

Terra Felis 22Terra Felis 2. Uncompromising. Efficient.3The uncompromising implementation of innovative concepts in terms of an economically efficient, highly rational beet har-vesting technique have made HOLMER the Number One on the market world-wide. Similarly, HOLMER does not accept compromises with the Terra Felis 2 either.Terra Felis 2 has no problem adaptating its cleaning perfor-mance to the various loading conditions which obviously may fluctuate greatly during the campaign. The cooperation of the innovative pick-up of the Terra Felis 2, developed and patented by HOLMER, and the redefined post-cleaner HOLMER Vario-Cleaner ensures optimum beet cleaning quality and maximum loading efficiency. Thus, Terra Felis 2 promises high harvesting productivity coupled with maximum economic efficiency.Pick-up 4HOLMER VarioCleaner 5Loading 6Chassis 7Cab 8HOLMER EasyTouch 10Engine / Hydraulic system 12Details 14Holding tank pick-up/ HOLMER Service 13Technical data 15Terra Felis 2. Uncompromising. Efficient. 3 2 1 2 1 34Perfectly adapted pre-cleaning. Gentle or intensive. Variable cleaning performance thanks to adap-tation of the rotational speed of the distribution and gathering rollers Pick-up width 10 m The increased roller diameter of 140 mm not only reduces wear, but also clogging of the rollers Consumes less fuel: 40% reduction of rotation-al speed with the same loading performance The sliding wedge consists of a divided hood which can be opened easily for inspection The pendulum equalizer on the clamp blade ensures an optimum pick up of the remaining beets – even in corners Automatic folding (outwards and inwards) at the mere push of a buttonThe cleaning track and thus the cleaning intensity of the table designed by HOLMER can be adapted flexibly and easily by steplessly varying the rotational speeds of the distribution and gathering rollers. High rotational speeds on the distribution rollers first move the beets outwards on the table. This almost doubles the cleaning distance compared to the “gentle” setting.The pick-up is followed by the gentle, but efficient 900 mm wide center conveyor. It thus ensures a high loading performance of up to 560 t/h.High speed: The cleaning route is nearly getting doubled.1. Fingerrollers and transfer roller2. Distributoin rollers3. collecting rollers1. Fingerrollers and transfer rollers 2. Distribution rollers 3. collecting rollersGentle adjustment: Beets are carries directly to the middle belt.5Absolute consistency is the predominant feature of the post-cleaner HOLMER VarioCleaner – also as regards the 15 m long transfer arm. The innovative concept: with the Vario-Cleaner, beets can be cleaned extremely gently or intensively – as required. This results in gentle beet transport with con-siderably reduced loss of roots and less damage to the beets. Under difficult conditions and in the presence of large amounts of dirt, the counter-rotational roller cleaner pro-vides excellent results. If the beets are only slightly soiled, the counter-rotational rollers are covered completely or partially by a steplessly variable transfer web. Stepless set-ting of the cleaning intensity.Gentle cleaning Intensive cleaningHOLMER VarioCleaner. Flexible post-cleaning included. Gentle beet transport, as with all cleaner ver-sions, the beets are never dropped directly from the infeed web onto the spiral rollers, but always first onto a transfer web. Minimization of loss due to breakage in clean beet clamps Low wear on the intensive cleaner on stony soils Optimum cleaning of soiled beets and weeds – optionally available with a beet brake ensur-ing a maximum cleaning effect The complete suspension on the swivel bracket rules out clogging between the frame and the cleaner, even in the presence of an extreme leaf volume.6Optimum loading. In any position.Difficult-to-access loading areas, long distances to be bridged, considerably varying loading heights? No prob-lem for the Terra Felis 2. Thanks to its transfer loader with up to 15 m transfer scope and a transfer height of up to 6 m, it covers a loading angle of just over 320° via two hydraulic slewing rings. Thus, smooth beet loading is a matter of course.Additional benefits of the transfer loader: Light-weight design thanks to high-tensile polyamide plates to reduce wear and costs Hydraulic non-wearing driveOptional with a weighing feature integrated in the terminal7Reaching its destination safely and comfortably at 32 km/hTerra Felis 2 provides you with an optimally tuned chassis. From the suspension of the pick-up via the axle-base down to the hillside compensator system, these and many other aspects have been taken into consideration to make you reach your destination with the Terra Felis 2 comfortably and safely – in the field or on the road. The hillside compensator system ensures stabili-ty: even with a transfer scope of 15 m, the Terra Felis 2 is well and safely grounded with all four wheels Even on the road, the machine is stabilized by the suspension system to avoid borderline situ-ations occurring right from the start Excellent weight distribution and arrangement of modules, e. g. the pick-up, to ensure optimum traction over all four wheels Both drive axles are equipped with brakes Additional driving comfort comparable to that of a tractor is ensured by the 3 and 4 axles in a carefully defined location Hillside compensators with integrated suspension system8A working place. with feel-good guarantee.The cab – at present the largest available on the market – not only provides a unique space perception but also an optimum working climate to feel good in.The cab is the main working place of the Terra Felis 2 operator, which is why HOLMER set itself the design target to build a cab which leaves nothing to be desired.Equipment features: Auxiliary heating as standard Leaving home function for working lights Automatic folding system comprises the following functions: - side plates up/down, inwards/outwards - lifting/lowering pick-up side plates - lifting/lowering center duct - sliding plates inwards/outwards - blade assembly in on-road positionKm/hV+ –9A comfortable Joystick. All in one hand.The multifunktion joystick Allocation of the main directions:Function 1 Function 2Speed Adjustment for all drives. Automatic post-cleaner is swung automatically into working or on-road position Two proportional joysticks for handling the machine functions Standard automatic climate control Spacious refrigerator box Pneumatically locked rotary heated seat Electrically adjustable and heated rearview mirrors Optionally available with a radio with Blutooth and hands-free talking function 4 Xenon headlights are optionally availableA BC D10HOLMER EasyTouch.New standards regarding intuitive operation are set by the Touchscreen Terminal with the EasyTouch interface specifically designed by HOLMER.The highlight: Menu interface in the main indication area is adapted automatically to current operating mode. The func-tions not required can be blanked out.The important operating panels and parameters such as the module bar A , the steering display B and the service data display are in a fixed location; thus the operator can always monitor and control the machine easily, no matter whether in the field or on the road.The main display area C not only provides operating infor-mation and warnings, but here, the operator can select and adjust all parameters of the individual modules intuitively via softkeys.operating mode display balance select listSoftkeys11The base setting can be done in the select list D . The load-ing settings show all speeds of the individual modules at a glance and allow all rotational speeds to be adapted by pressing a button (e. g. when picking up the residual beets); three basic settings can even be saved and retrieved at the touch of a finger. Moreover, in the machine menu, the operator can enter his individual settings, from the reversing speed up to the unique option of synchronous control of both slewing rings.This means that to remain parallel with the machine, the op-erator does not have to control the joystick crosswise, but to move it into one direction only.The key pad “Selection list” takes you to the machine set-up, diagnostic system, the basic scales setting and back to the loading program.12Powerful engine. More power – less fuel consumption.The powerful MAN engine (250 kW) in the reduced speed range ensures low diesel consumption at a maximum loading performance of up to 560 tons per hour. Emission level 3b - without AdBlue Operation at full load and maximum torque at only 1200 rpm Automotive loading Excellent accessibility for maintenance and service Hydraulically driven and automatically reversing fanThe high-capacity hydraulic modules of the Terra Felis 2 ensure extremely long service lives. This ensures reduced operating costs due to low-wear modules. Load-sensing hydraulics Switching OFF the pump lines not required via load-sensing multi-disc clutches improves the cold-starting properties and saves fuel druing roadwork The hydraulic tank integrated in the engine compartment is kept warm over a long period of time by the engine’s residual heat, in order to ensure optimum oil viscosity also under very lo operating conditions13Details.Everything neatly stowed awayThe storage boxes of the Terra Felis 2 provide ample space even for traffic signs safeguarding loading areas on roads. The boxes are easily accessible from the front and the sides. Thanks to the residual heat dissipated by the oil and air conditioning cooler, the central lubrication integrated in the box between the two axles maintains sufficient flowing properties even under difficult weather conditions. Optionally, a data box can be provided for the installation of a printer or scan-ner for the data recording system.Difficult circumstances?For regions subject to very high temperatures during the campaign or clogged soil conditions, the Terra Felis 2 can be equipped with a water spraying system. Capacity 550 liters (at choice 1,100 liters) Innovative operating concept and setting options Interval mode Unique feature of spraying time preselection during the breaks Automatic printer control: The spraying device is started automatically and independently at the pick-up or at the cleaner at a preselected pressureWhen the work goes on and onWith a capacity of 1,400 liters, the tank of the Terra Felis 2 not only permits long operating times – being integrated in the slewing counterweight, it also enhances safety during operation on inclines. The integrated step ensures stability while refuelling the Terra Felis 2. 14Holding tank pick-up. Performance in a new dimension.The HOLMER Service. More than convincing.Within easy reach of our customers, reliable, competent, quick - the convincing performance of the Terra Felis 2 is continued consistently in demand-driven consultation and other services which are tailored to the customer's specific requirements. Customized services offered by HOLMER’s after-sales service Providing comprehensive service base support 24-hour service and spare parts shipment during the harvesting season Ample training schedule for customers Comprehensive spare parts program can be ordered conveniently from our on-line shopThe Terra Felis 2 can be provided optionally with a 13 m³ large tank pick-up. The tank is loaded via a crane or a wheel loader. This permits storage of the beets in a large clamp or even on paved areas. Tank volume 15 m3 Cleaning via rubber finger rollers Progressive adjustment of the slat conveyor’s advancement speed 15Engine MAN D0836LEPower output 250 kW (340 HP) at 2100 rpm; 220 kW (300 HP) at 1700 rpmTravel drive• Mechanical front and rear axles• Axles driven via propeller shafts• A hydrostatically driven 3-gear transfer box is located between both axles• Crawling mode can be connected separatelyAxlesFront: planetary steering axles with brakesRear: planetary steering axles with brakesLocks Front and rear axles with connectable differential lockDriving speeds• Crawling speed: 0 – 0.09 km/h• 1st gear: 0 – 12 km/h, progressively variable• 2nd gear: 0 – 25 km/h, progressively variable (optional 32 km/h)Hydraulic systemTravel drive: LINDEPTO: BOSCH-REXROTHComfort cab• Rotary seat with pneumatic lock at the push of a button• Sound-insulated, panoramic glazing• Air conditioning, auxiliary heating and heated seat• Pivotable side windows, sun visor• Radio• Spacious refrigerator boxLighting• 2 rotating beacons• 20 working lights• Front: 4 Xenon lights (optional)Control elements• Touch terminal operation with HOLMER EasyTouch as setting and information interface for the driver• Operation of frequently used functions via 2 joysticksSteering (preselectable steering combinations)• Single-axle steering• All-wheel steerCentral lubrication BEKA-MAXFuel tank 1.400 lOverall length 14,75 mOverall width 3,08 mOverall height 3,96 mAxle base 4,80 mTyres 710/75 R34Transfer height more than 6,00 mTransfer scope max. 15,00 mLoading angle Pivotable to the right or left up to a swing angle of 320°Pick-up width approx. 9.50 m internal width, approx. 10 m overall widthActive cleaning surface 35,50 m²Inner Turning circle 8,36 mSubject to technical modificationsTechnical Data. HOLMER Maschinenbau GmbH Regensburger Straße 20 D-84069 Schierling /Eggmühl Telefon: +49 (0) 94 51/93 03-0 Telefax: +49 (0) 94 51/33 70 info@holmer-maschinenbau.com www.holmer-maschinenbau.com