Trailed Disc Mowers- Brochure

Rear and front 2- and 4-drum mowers FOR PROFESSIONALS 5. Ideally fitted to the ground and even working height, 6. Safety breakaway spring regulated by deflection, 7. Quick and easy knife replacement, 8. PTO shaft in standard equipment, 9. Silent and stable operation. Z 010 Z 010/1 Z 010/2 REAR 2-DRUM MOWERS 2 Advantages: 1. Genious invention of 20th century - cuts perfectly either lying grass or very high sedge - cane, 2. Factory set 5,8 cm cutting height, regulated by distance rings, 3. DLG Signum Test, 4. Solid and tough design, Z 010/2Z 010 Z 010/1 12 Type Mowing width [m] Working capacity [ha/h] Number of knives [pcs.] Tractor’s power [HP] RPM PTOshaft Dimensions w / l / h [cm] Weight [kg] Z 010 1,65 ~ 1,50 6 from 40 540 400 Nm 331 / 152 / 116 400 Z 010/1 1,85 ~ 2,00 from 60 372 / 162 / 102 450 Z 010/2 2,10 ~ 2,50 8 from 70 540 Nm 410 / 175 / 106 550 3 321 Economy and precision of mowing... SIGNUM TEST 10/03 bestanden LD G View without safety guards Drum mowers 1,65 m to 2,10 m have solid de- sign and are very durab- le. Low power demand makes them one of the best in Polish market as well as abroad. Thanks to hydraulic lifting (optional equi- pment), mower can be easily transported at the rear or side of the tractor. Design of drum mower: 1. Improved sliding saucer hub – type IV – two double – row bearings (only Z 010/2 2,10 m), 2. Regulated cutting height by means of distance ring. Quick and easy knife replacement by means of mounting lever in standard equipment. 4 REAR 2-DRUM MOWERS WITH TINE CONDITIONER Z 010/4 2,10 m Type Mowing width [m] Swath width [m] Working capacity [ha/h] Number of knives [pcs.] Tractor’s power [HP] RPM PTOshaft Conditioner’s shaft Weight [kg] Z 010/4 2,10 ca. 1,10 ~ 2,50 8 from 75 540 540 Nm 250 Nm 690 Z 010/4 ~ 1,10 m Z 064/3 [mini] Z 064 Type Mowing width [m] Working capacity [ha/h] Number of knives [pcs.] Tractor’s power [HP] RPM PTOshaft Tractor’s class Drum’s height [cm] Dimension’s w / l / h [cm] Weight [kg] Z 064/3 [mini] 1,35 ~ 0,70 4 from 20 540 250 Nm 0,4 36,0 228 / 96 / 88 250 Z 064 1,35 ~ 1,00 4 from 25 0,6 44,0 290 / 137 / 97 330 REAR 2-DRUM MOWERS 5 Z 064/3 [mini] FOR MUNICIPAL TRACTORS Z 064 FOR AGRICULTURAL TRACTORS 106,0 cm 2-drum mowers Z064/3 [mini] are attached to municipal tractors. Shorter linkage (68 cm) and lower weight (only 250 kg) - these parame- ters enable attachment to smaller tractors - up to 1000 kg Advantages: 1. Low weight and power demand, 2. Factory set cutting height at 5 cm, which can be adjusted by distance rings (8 mm), 3. Ideally fitted to the ground and even working height, 4. Stone tested safety guards (EN 745), 5. Z 064 - DLG Signum Test, 6. PTO shaft in standard equipment, 7. Despite small dimensions they perfectly muddles through bigger vesture, 8. Safety breakaway spring regulated by deflection, 9. Quick and easy knife replacement, 10. Hydraulic lifting set in optional equipment. SIGNUM TEST 10/03 bestanden LD G 36 ,0 c m 68,0 cm Mowers with tine conditioners have hydraulic lifting in standard equipment, which enables trans- port upwards at the back or side of the tractor. Factory set working height (6 cm) has influence on grass re-growth and does not harm root unit of the grass. TINE CONDITIONER Advantages of tine conditioner: 1. Accelerates drying, 2. Eliminates tedding, 3. Lower losses of forage ingredients owing to reduced handling, 4. Loose forage spread into wide swath, 5. Always even swath for baler collecting, 6. New modernized tines in V-shape made of hard-to-tear steel Hardox, placed in rubber in- serts. View without safety guards Type Mowing width [m] Working capacity [ha/h] Number of knives [pcs.] Tractor’s power [HP] RPM Conditioner’sshaft Swath width [m] Dimensions b / l / h [cm] Weight [kg] K2BF 210 2,10 ~ 2,50 8 from 70 1000/540 540 Nm ca. 0,80 268 / 121 / 166 520 K4BF 265 2,65 ~ 3,00 12 from 90 1000 ca. 1,20-1,60 326 / 138 / 122 800 K4BF 300 3,00 ~ 3,50 18 from 100 369 / 144 / 122 870 FRONT 2 AND 4-DRUM MOWERS 7 Advantages: 1. High capacity – even in tough conditions, 2 Lifted side safety guard, 3. Factory set working height at 5,8 cm regulated by distance rings (8 mm), 4. Ideally fitted to the ground and even working height, 5. Perfect in combination with disc and drum mo- wers, 6. Tractor’s triangle cat. II in standard equipment, 7. Stone tested safety guards (EN 745), 8. PTO shaft in standard equipment, 9. Quick and easy knife replacement, 10. Solid and tough design, 11. Silent and stable operation. K4BF 265 K4BF 300 K2BF 210 K4BF 300 K2BF 210 K4BTC 265 K4BTC 300 REAR 4-DRUM MOWERS WITH CENTRAL SUSPENSION 6 K4BTC 265 A B C Hydro-pneumatic suspension Instead of support springs (upper picture) hydro-pneumatic suspension is needed especially for the first cut, for lucerne, clover etc. to prevent damage to the stubble. Hydro-pneuma- tic suspension enables operation with minimum pressure on the ground from around 70 kg. Front drum mowers are characterized by per- fect ground following, thanks to suspension with support springs Mowers with 2 or 4 drums have sliding sau- cer hub – type IV – two double – row bearings * When buying SaMASZ front mowers please specify direction of PTO shaft (looking from driver’s seat), diameter and number of splines. Transport positions The most important advantage of K4BTC mo- wers is a possibility to transport the machines in three different posi- tions, which facilitates comfort of transport on narrow roads. Working positions: A) upwards at the back of the tractor, B) upwards at the side of the tractor, C) horizontally at the back of the tractor. Latch mechanism Innovative, patented latch mecha- nism enables setting the mower in three positions depending on wor- king mode: work – storing – transport. Proper position can be adjusted by means of a cord from tractor’s cabin. We proudly present series of 4-drum mowers K4BTC with central suspension enabling per- fect ground following and high range of in- clination, which facilitates operation on une- ven terrain. Advantages: 1. Central suspension (spring in standard equi- pment- hydropneumatic option), 2. Hydraulic lifting to transport position in stan- dard equipment, 3. High capacity, even in tough conditions, 4. Stone tested safety guards (EN 745), 5. Hydraulic safety breakaway device, 6. Lifted side safety guard, 7. Swath width regulated by swath guides, 8. Quick and easy knife replacement, 9. PTO shaft in standard equipment, 10. Ideally fitted to the ground and even working height, 11. Central suspension – even weight balance on the ground, 12. Silent and stable operation. Type Mowing width [m] Swath width [m] Working capacity [ha/h] Number of knives [pcs.] Tractor”s power [HP] RPM PTOshaft Min. transport height Weigh [kg] K4BTC 265 2,65 1,20 - 1,60 ~ 3,00 12 from 80 1000 540 Nm 3,45 m 1000 K4BTC 265H 950 K4BTC 300 3,00 ~ 3,50 18 from 90 3,80 m 1070 K4BTC 300H 1015 Perfect mowing... Ed it io n 1 / 2 01 2 EN 15-161 Bialystok ul. Trawiasta 15 Poland www.samasz.com SaMASZ Sp. z o. o. tel. +48 85 664 70 31 fax. +48 85 664 70 41 email: samasz@samasz.pl Your dealer: H - Hydro-pneumatic suspension instead of springs in optional equipment Hydraulic safety breakaway device Central suspension unit is integrated with hydrau- lic safety device, which protects the mower aga- inst hitting into immovable obstacle. In the event of hitting an immovable obstacle the cutterbar folds back and at the same time rises about 40 cm. After that, the cutterbar automatically comes back to working position