Wood Chip Machines-HM 4-300 and HM 6-300

HM 4/6-300HM 6-300 VMHM 5/6/8-400 HM 8/10-500 K & HM 14-800 KHM 10-500 KT & 14-800 KTHM 4/6-300 EM & 5/6/8-400 EMHM 14-800 KLWoodchippersEnergy in balance with naturePages 2 / 3Pages 4 / 5Pages 6 / 7Pages 8 / 9Pages 10 / 11Pages 12 / 13Pages 14 / 15HM 4-300HM 6-300Trunk diameterup to 30 cmThe HEIZOHACK feed control HE 002 controls the feed motion of the wood to be made into chips irrespective of the drive performance.The integrated operating hours counter stores the daily and total numbers of hours. Auto reverse is available for the stress control to clear the drum.All manually loaded wood chipping machines with a chassis are products, which meet the requirements of the Equipment and Product Safety Act and bear the „Tested Safety“ mark. All these machines have only been authorised for manual loading and are equipped with a safety cable which runs round the in-feed table. High performancemanually loaded mobile wood chipper2High performancemanually loaded mobile wood chipperThe manually fed wood chippers for mobile and flexible operation on the spot. The chipper is transported on a trailing axle or the three point hitch of the tractor.With the HEIZOHACK wood chipping machines, wood waste, such as slats, beams, logs, blocks and branches and whole tree trunks with a diameter of up to 30 cm (300 series) and up to 40 cm (400 series) can be shredded with little energy required. A steel conveyor belt and a pressure roller with welded tongs ensure powerful and reliable feeding of the chipping material.HM 4-300 HM 6-300Feed Height: 300 mmFeed Width: 330 mm 500 mmTransport Height: 2422 mmTransport Width: 2265 mmWorking Height: 850 mmWorking Width: 2965 mmEjection Height: 3419 mmSupport Load: 490 kg 620 kgTotal Length: 3213 mm 3382 mmWeight: about 1850 kg about 2250 kgFlywheel mass: 130 kgFeed in:Conveyor belt 600 mm longIn-feed table 900 mm longPressure roller with steel teethØ 380 mmSieve: Standard mesh 35 / 40 mmChip Drum Ø: 450 mm with quick change bladesDrive: Power take-off shaft, max. 750 rpmFlywheel Ø: 1120 mm, 60 mm thickEjection:Manually foldabale and rotatable, supported by pneumatic shock damperControls:automatic load-dependent RPM control of the feed with two daily hours counters and an overall oper-ating hours counter; belt and roller speeds infinitely adjustableChassis:Chassis 25 km/h unbraked and trailing axleChassis 25 km/h with cable brake and trailing axleTyres 10/75-15.3Dimensions and weights incl. chassisWood Chippers3HM 6-300 VMWith a feed height of up to 30 cm, cut wood and tree trunks can be worked on on the spot to high quality wood chips.The chipper mounted on a high speed trailer chas-sis makes it possible to get to the site quickly.The ability to rotate the chipper in the direction of the wood to be chipped using the heavy duty ball bearing ring between the chipper and the chassis.Mobile wood chippers formanual feeding for flexibleoperations on the spotTrunk diameterup to 30 cm4Mobile wood chippers formanual feeding for flexibleoperations on the spotThe HM 6-300 reliably draws in logs with a diameter of up to 30 cm via a hydraulically driven feed with conveyor belt and pressure roller. The outstanding performance and the tandem chassis, on which up to 80 km/h can be driven, speaks for this series.The machine is for manual feeding only and equipped with a safety cable.HM 6-300 VMFeed Height: 300 mmFeed Width: 500 mmTransport Height: 2782 mmTransport Width: 2110 mmWorking Height: 960 mmEjection Height: 3681 mmSupport Load: 100 kgTotal Length: 4520 mmWeight: about 3500 kgFlywheel mass: 130 kgFeed in:Conveyor belt 600 mm longIn-feed table 900 mm longPressure roller with steel teethØ 380 mmSieve: Standard mesh 35 / 40 mmChipping Drum Ø:450 mmwith quick change bladesFlywheel Ø: 1120 mm, 60 mm thickEjection:Manually foldable and rotatable,pneumatic shock damper supports Ejection flap adjustment and electric tower rotation (infinite)Controls:automatic load-dependent RPM con-trol of the feed with two daily and an overall operating hours counters;belt and roller speeds infinitelyadjustableDrive:Air-cooled four stroke diesel engine with direct injectionType Hatz 4L41C, 51 kW / 70 HP, max. 3000 rpmChassis:ALKO tandem chassis 80 km/h, inertia brakedTraction shaft adjustable for height, tyres 225/70 R 14Dimensions and weights incl. chassisWood Chippers5HM 5-400HM 6-400HM 8-400Sturdy mobile wood chipperfor manual feeding Trunk diameterup to 40 cm6A large impeller blower with integrated flywheel ensures good ejection of the chips and a powerful and even throughput of the chip drum.In order to ensure safe operations for manual feed-ing, these machines are equipped with a stable control lever above the feed table.Linked to a steel cable round the front edge of the feed table, the feed into the machine can be stopped with safety.By means of interchangeable sieves, available in different mesh sizes, uniform wood chips are gen-erated.HM 5-400HM 6-400HM 8-400Feed Height: 400 mmFeed Width: 420 mm 500 mm 670 mmTransport Height: 2588 mmTransport Width: 2265 mmEjection Height: 3502 mmWorking Height: 790 mmWorking Width: 3105 mmSupport Load: 820 kg 910 kg 970 kgTotal Length: 3343 mm 3427 mm 3596 mmWeight:about2950 kgabout3150 kgabout3300 kgFlywheel mass: 300 kg 300 kg 470 kgFeed in:Conveyor belt 600 mm longIn-feed table 900 mm longPressure roller with steel teethØ 450 mmSieve: Standard mesh 35 / 40 mmChipping Drum Ø:495 mmwith quick change bladesDrive: Power take-off shaft, max. 750 rpmFlywheel Ø: 1370 mm, 60 / 90 mm dickEjection:Manually foldable and rotatable,supported by pneumatic shock damperControls:automatic load-dependent RPMcontrol of the feed with two daily and an overall operating hours counters; belt and roller speeds infinitelyadjustableChassis:Chassis 25 km/h unbraked andtrailing axleChassis 25 km/h with cable brake and trailing axleTyres 400/60 - 15.5Chassis 40 km/h with spring loaded air brake 3,5 t andtrailing axleDimensions and weights incl. chassisWood Chippers7HM 5-400 EMHM 6-400 EMHM 8-400 EMHM 6-300 EMHM 4-300 EMEfficient wood chipperwith electromotor forstationary useHM 4-300 EMHM 6-300 EMFeed Height: 300 mmFeed Width: 330 mm 500 mmTransport Height: 2422 mmTransport Width: 2265 mmEjection Height: 3310 mmWorking Width: 2965 mmTotal Length: 3700 mmWeight (without electromotor)2100 kg 2320 kgFlywheel mass: 130 kgFeed in:Conveyor belt 600 mm longIn-feed table 900 mm longPressure roller with steel teeth Ø 380 mmSieve: Standard mesh 35 / 40 mmChipping Drum Ø:450 mmwith quick change bladesRPM: max. 750 rpmAuxiliaryEngines:Electromotor 45 kW / 1500 rpmV-belt drive, control cabinet withstar-delta switchingWeight with frame 625 kgElectromotor 55 kW / 1500 rpmV-belt drive, control cabinet withstar-delta switchingWeight with frame 680 kgElectromotor 75 kW / 1500 rpmV-belt drive, control cabinet withstar-delta switchingWeight with frame 810 kgFlywheel Ø: 1120 mm, 60 mm thickEjection:Manually foldable and rotatable;supported by pneumatic shock damperControls:Automatically load-dependentfeed regulation;Two daily counters and one overall operating hours counter;Belt speed infinitely adjustable;Control cabinet withstar-delta switching;connection on site in accordance with DIN-VDE**German Commission for Electrical, Electronic and Information TechnologiesTrunk diameterup to 40 cm8Efficient wood chipperwith electromotor forstationary useWood ChippersHM 5-400 EMHM 6-400 EMHM 8-400 EMFeed Height: 400 mmFeed Width: 420 mm 500 mm 670 mmTransport Height: 2422 mmTransport Width: 2265 mmEjection Height: 3310 mmWorking Width: 2965 mmTotal Length: 3700 mmWeight (without electromotor)2950 kg 3170 kg 3550 kgFlywheel mass: 300 kg 300 kg 470 kgFeed in:Conveyor belt 600 mm longIn-feed table 900 mm longPressure roller with steel teeth Ø 380 mmSieve: Standard mesh 35 / 40 mmChipping Drum Ø:495 mm with quick change bladesRPM: max. 750 rpmAuxiliaryEngines:Electromotor 45 kW / 1500 rpmV-belt drive, control cabinet withstar-delta switchingWeight with frame 625 kgElectromotor 55 kW / 1500 rpmV-belt drive, control cabinet withstar-delta switchingWeight with frame 680 kgElectromotor 75 kW / 1500 rpmV-belt drive, control cabinet withstar-delta switchingWeight with frame 810 kgFlywheel Ø: 1370 mm, 60 / 90 mm thickEjection:Manually foldable and rotatable;supported by pneumatic shock damperControls:Automatically load-dependentfeed regulation;Two daily counters and one overall operating hours counter;Belt speed infinitely adjustable;Control cabinet withstar-delta switching;connection on site in accordance with DIN-VDE**German Commission for Electrical, Electronic and Information Technologies9HM 8-500 KHM 10-500 KHM 14-800 KFor private contractors and for the professional gen-eration of wood chips, the K series fulfils all wishes.A variety of additional options for the machine con-figuration are available for applications in daily use. Powerful entry-level modelfor wood chip producersThe feed speed can be infinitely adjusted for all machines by means of a distributor fitted in the hydrau-lic control unit.The upstream hydraulically driven table feed roller helps to draw longer logs into the feed.By means of the standard adapter fit-ting for quick change blades, the blades can be exchanged in a very short period of time.Trunk diameterup to 50 cmEnd pieces:HM 8-500 up to 70 cmHM 10-500 up to 80 cm HM 14-800 up to 80 cm10The powerful professional machines are equipped as standard with remote controlled functions, such as turret rotation, raising and lowering, infi-nitely variable feed control via servo-hydraulics, electronic rpm and machine controls.The hydraulic block is fitted segment style in a clear and robust steel housing. Each valve is elec-trically activated and can, in addition, be operated by a hand lever (emergency operation).The hydraulic oil is cooled by an oil cooler with an electrically driven fan.Via a 10 groove V-belt reduction gearing, trans-mission is generated which enables varying shaft rpm’s to be transmitted powerfully.Powerful entry-level modelfor wood chip producersHM 8-500 KHM 10-500 KHM 14-800 KFeed Height: 800 mmFeed Width: 708 mm 877 mm 1215 mmTransport Height: 2900 mmTransport Width: 1)2700 mm / 2)2624 mmWorking Height: 1200 mmWorking Width: 4140 mmEjection Height: 4410 mm 4980 mmSupport Load: 2000 kg 2100 kg 2420 kgTotal Length: 4610 mm 4780 mm 5120 mmWeight: ca. 6900 kg ca. 7400 kg ca. 8320 kgFlywheel mass: 1000 kgFeed in:Conveyor belt 900 mm longFeed table 1500 mm longPressure roller with steel teethØ 800 mmIn-feed table:Hydraulically foldable;including front end roller;optionally with conveyor beltSieve:Standard mesh 45 / 60 mmwith stop barsChipping drum Ø: 495 mm with quick change bladesDrive:Via universal shaft andV-belt transmissionRPM: max. 1000 rpmFlywheel Ø: 1370 mm, 150 mm thickEjection:Hydraulically foldable;height adjustable and rotatable(ejection height 3.35 m up to 4.25 m or 4.79 m with an HM14-800 K,Depending on chassis and tyres);hydraulic ejection flap adjustmentControls:Automatic load-dependent feed control;Rotation direction and speed of the conveyor belt and pressure roller infinitely variable, irrespective of one another and reversible; two day and one overalloperating hours counters;Remote control with control panelfor all functionsCassis:Chassis 25 km/h or 40 km/h trailing axle and spring-loaded air brake1)Tyres 500/45 R22.52)Tyres 400/55 R22.52)Tyres 385/55 R22.5Dimensions and weights incl. chassisWood Chippers11HM 10-500 KTHM 14-800 KTTrunk diameterup to 50 cmOptionally we deliver the T60 remote control for the functions rotate, raise and lower the ejection turret and raise and lower the feed flap for all crane-loaded wood chippers. The professional woodchipper for economicwood chipping productionEnd pieces:HM 10-500 up to 80 cm HM 14-800 up to 80 cm12Wood ChippersThe professional woodchipper for economicwood chipping productionHM 10-500 KTLHM 14-800 KTLFeed Height: 800 mmFeed Width: 877 mm 1215 mmTransport Height: 3650 mmTransport Width: 1)2980 mm / 2)2700 mmWorking Height: 1620 mmWorking Width: 4300 mmEjection Height: 5800 mmSupport Load: 1400 kg 1500 kgTotal Length: 5800 mmWeight: about 11500 kg about 12500 kgFlywheel mass: 1000 kgFeed in:Conveyor belt 900 mm longFeed table 1500 mm longPressure roller with steel teethØ 800 mmIn-feed table:Hydraulically foldable;including front end roller;optionally with conveyor beltSieve:Standard mesh 45 / 60 mmwith stop barsChipping Drum Ø: 495 mm with quick change bladesDrive:Via universal shaft andV-belt transmissionRPM: max. permissible 1000 rpmFlywheel Ø: 1370 mm, 150 mm thickEjection:Hydraulically foldable, height adjustable and rotatable (ejection height 3.35 m up to 5.14 m or 4.79 m, depending on chas-sis and tyres);hydraulic ejection flap adjustment Controls:Automatic load-dependent feed control;Rotation direction and speed of the conveyor belt and pressure roller infinitely variable, irrespective of one anotherand reversible; two day and oneoverall operating hours counters;Remote control with control panelfor all functionsChassis:Tandem chassis40/60 km/h (without ABS) or80 km/h (with ABS)and dual air brake system1)Tyres 560/45 R22.52)Tyres 385/55 R22.52)Tyres 400/55 R22.5Dimensions and weights incl. chassis13HM 14-800 KLSet up on an up to 440 horsepower, four-wheel drive Mercedes Actros, our most powerful wood chipper is quickly on the spot.The drive is provided by the truck engine (auxiliary drive).Efficient and economic chipping of high-quality chip material is guaranteed in comfort and style.Trunk diameterup to 50 cmEnd pieces:HM 14-800 up to 80 cm14All wood chipper functions and the loading crane can be operated safely and comfortably from the lorry cab.By means of a camera mounted at the ejection point, the machine operator always has the chip material and the container levels in view.Powerful truck wood chipper for the professional chipperHM 14-800 KLFeed Height: 800 mmFeed Width: 1215 mmTransport Height: 3950 mmTransport Width: 2530 mmWorking Height: 1800 mmWorking Width: 3800 mm (without crane)Ejection Height: 5440 mmTotal Length: 7800 mmWeight: about 23500 kgFlywheel mass: 1000 kgFeed in:Conveyor belt 900 mm longFeed in table 1500 mm longPressure roller with steel teethØ 800 mmIn-feed table:Hydraulically foldable;including front end roller;optionally with conveyor beltSieve:Standard mesh 45 / 60 mmwith stop barsChipping Drum Ø: 495 mm with quick change bladesDrive:High speed auxiliary drive via the truck engine (PTO)RPM: 1300 - 1600 rpmDrivePerformance:323 kW / 440 HPFlywheel Ø: 1370 mm, 150 mm thickEjection:Hydraulically foldable;Adjustable for height and rotatable;Hydraulic ejection flap adjustmentControls:Automatic load-dependentfeed control;Rotation direction and speed of the conveyor belt and pressure roller infinitely variable, irrespective of one another and reversible;two day and one overall operating hours counters;Remote control with control panel for all functionsChassis:Mercedes- BenzACTROS 3344 AK 6X6Track width 1800 mmTyres Rear Axle 315/80 R22.5Tyres Front Axle 385/65 R22.5Dimensions and weights incl. chassisWood Chippers15Our partner:Factory Maicha Factory HeidenheimHow to find us...Technical changes reservedHeizomat Gerätebau- Energiesysteme GmbHMaicha 2191710 GunzenhausenGermanyTel. +49 (0 ) 98 36 97 97 -0Fax +49 (0 ) 98 36 97 97 -97info@heizomat.de • www.heizomat.de88-004-010-002.005 • 05/2013Woodchippers