Only show results in Virginia? Ok

Feed Mixer equipment for Livestock

  • Premium

    KAHL - Model MAH and BWM Series - Batch Mixers

    Batch mixers of the construction series MAH and BWM are discontinuous mixers used for homogenising raw materials and the storage of non-freeflowing products. They are supplied as single-shaft or twin-shaft mixers.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Feed Industry Product line

  • Premium

    KAHL - Continuous Mixer for Continuous Mixing of Bulk Products and Liquids

    Our horizontal continuous mixers are high-speed agitator-blade mixers in robust design, in which mealy, granular, fibrous or flaky carrier substances are mixed with liquids free of lumps according to the whirling principle. Several bulk product flows, liquids, and steam can be added simultaneously. The throughput time and the type of whirl ...

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Feed Industry Product line

  • Premium

    KAHL - Premix Plant

    Automatic proportioning and weighing plant for microcomponents With the KAHL premix plant, also the smallest quantities of individual components can be weighed, proportioned and mixed with high precision. Depending on your demand, the plant is designed for a few or for far more than 20 components enabling you to produce premixes or concentrates ...

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Feed Industry Product line

  • Premium

    KAHL - Model Type MK - Mixing Conditioner

    Optimum final quality requires optimum conditioning. The KAHL mixing conditioner provides an economic process.

    By Amandus Kahl GmbH & Co. KG based in Reinbek, GERMANY. from Feed Industry Product line

  • DeLaval - Model FPM300 - Cow Feed Pusher

    Automate your least favorite chore. The DeLaval Feed Pusher FMP300 is a robust automated feeding solution designed to reduce manual labor and ensure cows have easier access to feed.  The angled blade pushes feed closer,  slowly turning it while pushing it along a rail system, helping to mix and maintain access to fresh rations.

    By DeLaval International AB based in Tumba, SWEDEN. from DeLaval Cow Feeding Product line

  • Jaylor - Mini Mixer Wagons

    Jaylor Mini Mixer Wagons are now available to the UK market. It is now possible for farmers of all sizes and also equestrian property owners to own and run a more than affordable quality feed mixer wagon. These mixers allow small herd operators to feed TMR rations. They also enable large herd operators to create special rations for dry and other ...

    By Bentons Farm Machinery based in West Sussex , UNITED KINGDOM.

  • Model MS-1000 - Bulk Feed Mixer

    The MS-1000 Mixer is designed for preparation of bulk (dry) mixes for all farm animals. The mixer can work with the H965/1 suction-force beat grinder and with a set of POJ-PASZ feed containers. The mixer consists of a steel casing with a funnel at the 65 angle, mounted on a triangle base. A spiral conveyor, installed vertically inside the casing, ...

    By BIN Ltd. based in Aleksandrów Kujawski, POLAND. from Feed Production Product line

  • Model 909/1400 - Vertical Feed Mixer

    J&a reserves the right to make changes without notice in the product design and specifications, or to add product improvements, without incurring Any obligations on good purchased.

    By J&A Manufacturing Inc. based in Pixley, CALIFORNIA (USA). from Vertical Feed Mixer Product line

  • Busatis - Knives for Balers, Self-loading and Feed Mixer Wagons

    Busatis develops and manufactures quality knives for balers, self-loading and feed mixer wagons according to the specifications of our customers. The products are made of special alloy tool steel either with or without wear protection coating and are delivered to all leading manufacturers of agricultural machinery worldwide.  

    By Busatis GmbH based in Purgstall, AUSTRIA. from Forage Harvesting Product line

  • Model FFF3625 - Central Feeders

    Models from 20 up to 200 outlets to use with hoses from 25 mm up to 63 mm of external diameter and up to 8 silos with average storage of 2 cubic meter each one. Feeder allows to mix pellets up to 12 mm, sending doses from 10 grs up to 200 kg

    By FishFarmFeeder based in Vigo (Pontevedra), SPAIN. from Feeding Systems - Central Feeders Product line

  • Model FFF1540 - Central Feeders

    Models from 20 up to 200 outlets to use with hoses from 25 mm up to 63 mm of external diameter and up to 8 silos with average storage of 2 cubic meter each one. Feeder allows to mix pellets up to 12 mm, sending doses from 10 grs up to 200 kg

    By FishFarmFeeder based in Vigo (Pontevedra), SPAIN. from Feeding Systems - Central Feeders Product line

  • Mixers

    The range of single & twin shaft Van Aarsen MultiMix paddle mixers and liquid mixers are designed to mix a wide range of raw materials, additives and liquids into a homogeneous animal feed mixture, all within a short mixing time.

    By Van Aarsen International B.V. based in Panheel, NETHERLANDS.

  • Apache - Model II - Trailed Double Auger Vertical Feed Mixers

    They are vertical feed mixers in two or three screws that unlike the other wagons working on planes of different height of at least 15 cm. In this way the force of gravity favors the passage of the material to fall from side to side and this creates a double-rotary vertical mixing cycle and the different height ensures the intersection of the ...

    By L.U.V.S. S.R.L based in Arre (PD), ITALY. from Vertical Wagons Trailed Double Auger Product line

  • Spirmix Trampilla - Model 12 - 14 m³ - Mixer Wagon - Vertical Auger Diet Feeder

    The Spirmix diet feeders 12 – 14 m3 are equipped with a vertical stepped auger that brews and aerates the mixture, they can feed about 60 to 90 dairy cows per pass. The rolled tank of the mixer feeder gives various advantages, it reduces the power required for making a mixture; the flared and smooth shape makes the ration homogeneous more ...

    By Lucas G based in La Verrie, FRANCE. from Bedding Product line

  • NDE - Model 1552 - Side Door Vertical Mixer

    The NDE 1552 vertical feed mixer is the exact same mixer as the 1652 except it has a 12' lower height. With a height of 100' this mixer was designed for dairy producer that prefer to load with a skid steer or situations where overhead clearance is an issue.

    By New Direction Equipment (NDE) based in Sioux Falls, SOUTH DAKOTA (USA). from Side Door Mixer Product line

  • Double Auger Horizontal Static Plant

    Tatoma designs static turnkey feeding plants using its range of mixers and other components. The two augers rotate in opposite directions toward the centre of the tub, causing the ingredients to flow both lengthwise and crosswise. We recommend placing the tub on an  inclined plane to strengthen the movement by gravity and thus achieve a more ...

    By Tatoma Grupo based in Monzón (Huesca), SPAIN. from Agro Division-Stationary Feeding Plants Product line

  • Blower Mills

    The GMS series blower mills carry milled grain meal in the gentle air flow up to 60 m wide. Ground material is from a long distance via hand-operated or motor-operated suction valves, a suction-feed device sucked with funnel or a movable suction-feed device. The HIMEL GMS is especially suitable for use in mixing systems and computer controlled ...

    By HIMEL Maschinen GmbH & Co. KG based in melchingen, GERMANY. from Milling & Mixing Systems Product line

  • Bulk Feed Delivery System

    Feed Distribution is available with a Traveling Hoper Feeding System or Flat Chain Feeding System. Both designed to effectively work with all Alaso Cage Systems and smoothly distribute the feed throughout the house. Alaso's Flex500 Independent Feed Filling System of 5 inches in diameter, allows for an efficient feed filling process. This is ...

    By Alaso based in Lakeland, FLORIDA (USA). from Accessories Product line

  • Sayginlar - Model YK-HEL 40 - Feed Mixer and Distributer 3m3 Double Helix Chain System with Conveyer

    Feed Mixer and Distributer 3 m3 Double Helix Chain System with Conveyer - Areas of Usage and Its Features and Technical Properties. This machine can chop straw, cloves and hay bales and mix it with corn silage, broken beet parts and pulp, bran and feed homogenously. It is ideal for small and medium-sized businesses.

    By Sayginlar Agriculture Machinery Ltd. based in Afyonkarahisar, TURKEY. from Feed Mixer and Distributor Product line

  • Sayginlar - Feed Mixing Machine with 220 w Electricity (Cylinder Spiral)

    Feed mixing machines can work with 220 W electricity (used at homes) and it is only used for mixing homogenously but it doesn’t chop the feed. It requires minimum maintenance but it gives maximum performance. The materials to be mixed can be thin straw, corn silage, beet parts end pulp, bran, wheats and other materials used in feeding. It ...

    By Sayginlar Agriculture Machinery Ltd. based in Afyonkarahisar, TURKEY. from Feed Mixer and Distributor Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you