Only show results in Texas? Ok

Manure Pumping equipment for Livestock

  • DM - Model 3-PTH - Pump

    DM Machinery Inc, has developed  the new DM 3-pth pump, to its line up. Light weight, flexible and pivoting, this new DM pump has gone one step over and beyond in the agitation and loading of liquid or semi-liquid manure ( hog, cow and municipal waste...etc.) This pump will out perform all other makes in the market.

    By DM Machinery based in St-Simon, QUEBEC (CANADA).

  • Vandenberg - Brisket Bars

    Vandenberg Step Over Brisket Bar designed for30”, 36”, 38” and 45” on center. Side Milking Herringbone Barn Equipment. Heavy-Duty Super-Fast Side-Exit Herringbone Stalls. Brisket Bar Available with Side-angle Herringbone Stalls. Radial Arm Milk Hose Supports. Automated Entrance & ExitGates. Wash Pen Sprinklers & ...

    By Vandenberg Mfg. Co., Inc. based in Artesia, CALIFORNIA (USA).

  • Manure Systems

    Sikkema's Equipment handles all of your manure system needs from design and installation to service and maintenance.

    By Sikkema`s Equipment based in Byron Center, MICHIGAN (USA).

  • Manure and Slurry Plants

    Manure and slurry: Both are ideal and cost-effective substrates that can be easily converted to high-quality biogas, regardless of whether they are generated in individual large-scale operations or in regions where they are being processed. Depending on the underlying conditions, either compact liquid manure plants or industrial-scale biogas ...

    By Weltec Biopower GmbH based in Vechta, GERMANY. from Plants Product line

  • BackPac - Umbilical Application System

    Optimum use of the impact of direct hosing. Umbilical application systems with no additional liquid manure transport vehicle are highly efficient alternatives, particularly for operations with large fields. Instead of being transported in a tanker, the liquid manure is pumped directly to the field via a pipework system. At the field, the umbilical ...

    By Hugo Vogelsang Maschinenbau GmbH based in Essen Oldb., GERMANY. from Manure Spreading Technology Product line

  • JHacidificationNH4+ - Manure Cattle

    In the JHacidificationNH4 + plant liquid manure is mixed with sulfuric acid to adjust the pH value from about 7 to 5-6. When the pH value of the manure is lowered, ammonia is converted to ammonium. Ammonium does not evaporate, and therefore harmfull ammonia volatilization is reduced – by up to 50 % from cow stables.

    By JH Agro A/S based in Holstebro, DENMARK. from Manure Treatment Product line

  • BackPac - Umbilical System

    The BackPac umbilical system is a highly efficient way to spay manure, with maximum efficiency and minimal soil compression spreading to be done with quickly, and precisely using tanks or with a drag hose system.

    By Cadman Power Equipment Ltd. based in Courtland, ONTARIO (CANADA). from Manure Equipment Product line

  • Liquid Manure Trailers

    Our liquid manure tankers and liquid manure trailers are supplied in different sizes and with PLC control systems and radio control. Tank, chassis, crane and piping are all in stainless steel. Time is money, so we have strong focus on pumping capacity. We offer three types of pump systems, to meet various needs. Our liquid manure tankers and ...

    By VM Tarm a/s based in Tarm, DENMARK.

  • Mink Feed Tankers

    We offer mink feed tankers of stainless steel adjusted to the preferred chassis. The mink feed tanker has a large bottom slope and a trough that clings tightly around the bottom screw. In this way the tank will be emptied completely of feed, which minimizes the amount of waste and cleaning.

    By VM Tarm a/s based in Tarm, DENMARK. from Special Tankers Product line

  • EYS - Screw-Press Separator For Dewatering And Composting Solutions

    EYS screw-press separator is designed to mechanically separate solids and liquid portions of fiber-rich materials. These can be waste products such as animal manure, paper pulp, orange peel, etc., which still have potential economic value if processed further properly. EYS Separator offers a solution to turn these by-products into valuable and ...

    By Biogas Australia Pty Ltd based in Angaston, AUSTRALIA. from Biomass Generation Product line

  • Flex-Mix - Liquid Manure Spreaders

    About 75% of the power is required by the impeller. The tractor’s hp is transmitted directly to the impeller without going through gears. Requiring less power, the shredding screw is driven by the gear box. With this system, manure is shredded and sucked up in record time.

    By Teamco based in Warwick, QUEBEC (CANADA). from Agricultural Products Product line

  • Vacuum Spreaders

    The Teamco vacuum spreaders are offered in several models going from 1500 to 4000 gallons in capacity. Each spreader is manufactured with inside separators that are easily accessible for maintenance. An internal agitator system provides for a even spreading operation. Moreover, the vacuum spreaders are equipped with front and back level ...

    By Teamco based in Warwick, QUEBEC (CANADA). from Agricultural Products Product line

  • Agronic - Model LP 125 - Tractor-Operated Manure Slurry Pump

    Agronic LP 125 is a tractor-operated two-phase flow slurry pump. A hydraulic pump at the end of a hose efficiently pumps slurry to a six-winged PTO pump which again pumps the slurry forward. Pumping is possible in places which are inaccessible for regular pumps. The hydraulic pump is detachable so it can also be used separately. A moveable and ...

    By Agronic Oy based in Haapavesi, FINLAND. from Water and Slurry Pumps Product line

  • Manure Liquefier Managing Controversial Problems

    Odor, flies, and pit pump ability are the most offensive problems related to livestock operations. Our Manure Liquefier helps eliminate these problems.

    By B & S Research, Inc. based in Embarrass, MINNESOTA (USA).

  • Model ER3-E DF - Centrifugal Slurry / Manure Pump

    ER3-type centrifugal slurry / manure pump with air-cooled electric motor for stationary use as a chopper pump with mixing facility in pits and other storages.The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by ...

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from Motor Pumps Product line

  • Model ER4-S - Centrifugal Slurry / Manure Pump

     ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm. The pump is equipped with a three-way valve to switch between the two possible ...

    By Euro-P Kleindienst GmbH based in Bad Schwartau, GERMANY. from PTO Pumps Product line

  • SHAC - Manure Digester

    Designed for the following manure systems: Shallow & deep pit systems, straw packs / dry mounds & bio-shelters, shallow gutters with scrapers, slurry stores & lagoons, solid separation systems, open fields & pens. May also be with used with various compost systems such as domestic compost enclosures. Decreases odors and gases for a ...

    By SHAC Solutions Inc. based in Redcliff, ALBERTA (CANADA). from Commercial Product line

  • Manure Pump Mixer Manure Collect Tank and Fermentation Pool

    Manure Pump 'Mixer' Manure Collect Tank and Fermentation Pool.

    By Beijing Goke Agriculture Machinary Co. Ltd. based in Beijing, CHINA. from Cattle and Cow Products Product line

  • JHacidificationNH4+ - Manure Pigs

    In the JHacidificationNH4 + plant liquid manure is mixed with sulfuric acid to adjust the pH value from about 7 to 5-6. When the pH value of the manure is lowered ammonia is converted to ammonium. Ammonium does not evaporate, and therefore harmful ammonia volatilization is reduced – by up to 71 %.

    By JH Agro A/S based in Holstebro, DENMARK. from Manure Treatment Product line

  • High Pressure Submersible Manure Slurry Pump DG

    Submersible pump with cast iron casing. 10 motor sizes from 2.2 to 30 kW. Capacity up to approx. 220 m³/hour. ump diameters from 50 to 80 mm. Horizontal or vertical installation (shown here on base stand with vertical piping). Standard or extended knife system. Oil chamber between casing and motor.

    By Landia a/s based in Lem st., DENMARK.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you