RLH Industries, Inc.
- Home
- Companies
- RLH Industries, Inc.
- Products
- RLH - 2 Wire POTS Fiber Link Cards
RLH - 2 Wire POTS Fiber Link Cards
The 2 Wire POTS (Plain Old Telephone Service) system provides transmission of standard analog phone, telemetering, or PBX loop start signals over two optical fibers. The system transmits signals in the voice-frequency or audio range (300Hz~3500Hz) while providing ringing and off-hook detection. Common applications include telephone, faxes, and dial-up modems.
Most popular related searches
This fiber link card is NEBS Level III approved, is designed to be installed into any of the RLH Fiber Link Card Housings, and occupies a single card slot.
A complete system uses one CO and one Sub card.
Note: Special modifications are available for forward disconnect (SM07) and square wave ringing (SM10). Contact the factory for additional information.
- Compatible with all 2 Wire POTS systems
- CO side is loop powered
- Available in Single and Multimode
- Available with ST or SC Connectors
- Convenient sub card LED status indicators
- Compatible with a wide variety of Card Housings
- Limited Lifetime Warranty
- Made in USA
- Transmission Method: Frequency modulated light via two optical fibers
- Wavelength:
- Multimode: 850nm
- Singlemode: 1310nm
- SM Long Haul: 1310nm
- Fiber Type/Distance:
- Multimode (62.5/125µm, 50/125µm): 1.5 miles/2.5km
- Singlemode (9/125µm): 9 miles/15km; Long Haul 37 miles/60km
- Fiber Connector Type: ST or SC
- Dimensions: 7in. x 4in. x 1in. (177.8mm x 101.6mm x 25.4mm) (Standard RLH Fiber Link Card Form Factor)
- Operating Temperature: -40°F to +158°F (-40°C to +70°C)